[media] lirc_dev: cleanup includes

Remove superfluous includes and defines.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: return POLLHUP and POLLERR when device is gone

Most drivers return both values when the device is gone.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove unused module parameter

The "debug" parameter isn't actually used anywhere.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove superfluous get/put_device() calls

device_add() and friends already manage the references to the parent
device so these calls aren't necessary.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove lirc_irctl_init() and lirc_cdev_add()

These two functions only make the logic in lirc_register_driver()
harder to follow.

(Note that almost no other driver calls kobject_set_name() on their cdev
so I simply removed that part).

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_zilog: remove module parameter minor

Always let the kernel decide what minor the lirc chardev gets.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: merge lirc_register_driver() and lirc_allocate_driver()

Merging the two means that lirc_allocate_buffer() is called before
device_add() and cdev_add() which makes more sense. This also
simplifies the locking slightly because lirc_allocate_buffer() will
always be called with lirc_dev_lock held.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: make fops mandatory

Every caller of lirc_register_driver() passes their own fops and there
are no users of lirc_dev_fop_write() in the kernel tree. Thus we can
make fops mandatory and remove lirc_dev_fop_write().

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: clarify error handling

out_sysfs is misleading, sysfs only comes into play after device_add().
Also, calling device_init() before the rest of struct dev is filled out
is clearer.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove sampling kthread

There are no drivers which use this functionality.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove unused set_use_inc/set_use_dec

Since there are no users of this functionality, it can be removed
altogether.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: remove pointless functions

drv->set_use_inc and drv->set_use_dec are already optional so we can
remove all dummy functions.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mceusb: TX -EPIPE (urb status = -32) lockup fix

Once IR blasting or mceusb device commands fail with mce_async_callback()
TX -EPIPE error, all subsequent TX to device then fail with the same error.
...
[  249.986174] mceusb 1-1.2:1.0: requesting 38000 HZ carrier
[  249.986210] mceusb 1-1.2:1.0: send request called (size=0x4)
[  249.986256] mceusb 1-1.2:1.0: send request complete (res=0)
[  249.986403] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  249.999885] mceusb 1-1.2:1.0: send request called (size=0x3)
[  249.999929] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.000013] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  250.019830] mceusb 1-1.2:1.0: send request called (size=0x21)
[  250.019868] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.020007] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
...

Fault simulation/injection is by executing the following USB operation
in a mceusb instrumented driver, prior to TX I/O.
    retval = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
USB_ENDPOINT_HALT, usb_pipeendpoint(ir->pipe_out),
NULL, 0, USB_CTRL_SET_TIMEOUT);
    dev_dbg(ir->dev, "set halt retval, %d", retval);

After setting halt state for the TX endpoint, perform an lirc "irsend"
to generate TX traffic to device. After the TX HALT, the patch restores
subsequent TX to working state.
...
[  508.009638] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.009697] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.009847] mce_async_callback()
[  508.009864] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  508.009890] mceusb 1-1.2:1.0: kevent 0 scheduled
[  508.021552] mceusb 1-1.2:1.0: send request called (size=0x21)
[  508.021598] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.021963] mce_async_callback()
[  508.021981] mceusb 1-1.2:1.0: tx data: 84 b0 0c 8c 0c 84 8c 0c 8c 0c 84 8c 0c 8c 0c 84 98 0c 98 0c 84 98 0c 8c 0c 84 8c 0c 8c 0c 81 8c 80 (length=33)
[  508.021997] mceusb 1-1.2:1.0: Raw IR data, 0 pulse/space samples
[  508.066627] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.066669] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.066841] mce_async_callback()
[  508.066858] mceusb 1-1.2:1.0: tx data: 9f 08 03 (length=3)
...

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mceusb: RX -EPIPE (urb status = -32) lockup failure fix

RX -EPIPE failure with infinite loop and flooding of
[ 2851.966506] mceusb 1-1.2:1.0: Error: urb status = -32
log message at 8000 messages per second.
Bug trigger appears to be normal, but heavy, IR receiver use.
Driver and Linux host become unusable after error.
Also seen at https://sourceforge.net/p/lirc/mailman/message/34886165/

Fix:

Message reports RX usb halt (stall) condition requiring usb_clear_halt()
call in non-interrupt context to recover. Add driver workqueue call to
perform this recovery based on method in use for the usbnet device driver.

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: switch config to NEC decoding on shutdown

On the Amlogic SoCs, the bootloader firmware can handle the IR hardware
in order to Wake up or Power back the system when in suspend on
shutdown mode.

This patch switches the hardware configuration in a state usable by the
firmware to permit powering the system back.

Some vendor bootloader firmware were modified to switch to this
configuration but it may not be the case for all available products.

This patch was originally posted at [1].

[1] https://github.com/LibreELEC/linux-amlogic/pull/27

Signed-off-by: Alex Deryskyba <alex@codesnake.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: store raw event without processing

This patch fixes meson-it driver by storing event without processing
to avoid losing key pressed events when system is loaded and events
are occurring too fast.

This issue was reported at [1]

[1] https://github.com/LibreELEC/linux-amlogic/pull/42

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: fix breakage in "make menuconfig" for media_build

The Kconfig format is strict enough where if the indentation isn't
correct then the "make menuconfig" will break.

Fix the indentation to match all the other entries.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: change irq name to to of node name

Switch the interrupt description to the default which is the of node
name. This is more in line with the interrupt descriptions in
other meson drivers.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: use readl_relaxed in the interrupt handler

We don't need the memory barriers here and an interrupt handler should
be as fast as possible. Therefore switch to readl_relaxed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: switch to managed rc device allocation / registration

Switch to the managed versions of rc_allocate_device/rc_register_device,
thus simplifying the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: make use of the bitfield macros

Make use of the bitfield macros thus partially hiding the complexity
of dealing with bitfields.

The patch also includes a minor fix to REG0_RATE_MASK, so far it was
set to bit 0..10, but according to the spec it's bit 0..11.

[mchehab@s-opensource.com: readd REG1_MODE_SHIFT and REG2_MODE_SHIFT
 that got removed on the original patch, as this will be used on
 another patch]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: meson-ir: remove irq from struct meson_ir

The irq number is used in the probe function only, therefore just use
a local variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-spi: remove unnecessary initialization

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mceusb: fix inaccurate debug buffer dumps, and misleading debug messages

Some dev_dbg messages are misleading. Some dev_dbg messages have
inconsistent formatting. mceusb_dev_printdata() prints incorrect range
of bytes (0 to len) in buffer which the driver will actually process next.

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mceusb: sporadic RX truncation corruption fix

Intermittent RX truncation and loss of IR received data. This resulted
in receive stream synchronization errors where driver attempted to
incorrectly parse IR data (eg 0x90 below) as command response.

[ 3969.139898] mceusb 1-1.2:1.0: processed IR data
[ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2)
[ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90
[ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25)
[ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples
[ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000

Bug trigger appears to be normal, but heavy, IR receiver use.

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] em28xx: fix spelling mistake: "missdetected" -> "misdetected"

Trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: i2c: initialize scalar variables

Initialize scalar variables _pid_ and _ver_ to avoid a possible misbehavior.

Addresses-Coverity-ID: 1324239
Addresses-Coverity-ID: 1324240

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: simplify optional reset handling

As of commit bb475230b8e5 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to
describe optional, non-present reset controls.

This allows to return errors from devm_reset_control_get_optional
without special cases and to call reset_control_reset unconditionally.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx: Initial support Astrometa T2hybrid

This patch provide only digital support;
The device is based on 24C02N EEPROM, Panasonic MN88473 demodulator,
Rafael Micro R828D tuner and CX23102-11Z chipset;
USB id: 15f4:0135.

Status:
- DVB-T/T2 works fine;
- Composite works fine;
- Analog not implemented.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au0828: Add timer to restart TS stream if no data arrives on bulk endpoint

For reasons unclear, we intermittently see a case where the tune
is successful but the bulk stream fails to deliver any packets.

Add a timer to automatically stop/start the data pump if we
encounter such a case.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: Set the initial modulation

We need to set the initial modulation on driver setup, or else any
calls to GET_FRONTEND prior to the first SET_FRONTEND call will get
back garbage.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] xc5000: Don't spin waiting for analog lock

The xc5000 driver should not be spinning waiting for an analog lock.
The ioctl() should be returning immediately and the application is
responsible for polling for lock status.

This behavior isn't very visible in cases where you tune to a valid
channel, since lock is usually achieved much faster than 400ms.
However it is highly visible where doing things like changing video
standards, which sends tuning request for a frequency that is
almost never going to have an actual channel on it.

Also fixup the return values to treat zero as success and an actual
error code on error (to be consistent with other functions).  Note
this change has no practical effect at this time as none of the
callers inspect the return value.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: fix lock detection to be more reliable

Only looking at the lock register causes the status to float
between locked and not locked when there is no signal.  So improve
the logic to also examine the state of the FSC PLL, which results
in the lock status being consistently reported.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522 Remove 0x4 bit for register reads

The second highest bit in the register value is an indicator to do
a register read, so remove it since now au8522_regread() inserts
the bit automatically.

Also remove a stray instance where we were actually trying to write
to the I2C status register, which was actually a read.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: remove leading bit for register writes

The leading bit in register values is actually an indicator as to
whether to perform a read or write, so remove the bit from the
register values, since the au8522_writereg() is now responsible
for adding this bit automatically.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: remove note about VBI not being implemented

I got this working a couple of years ago.  Remove it from the
list of known issues.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: rework setup of audio routing

The original code was based on my reverse engineering of an I2C trace
of the Windows driver.  Now that I know what the registers actually do,
restructure the code a bit, removing some unneeded register programming
and fixing the sequencing of operations.

This reduces the time it takes to change inputs from 1300ms down to
600ms (as measured by "time v4l2-ctl -i 0")

Note this does not address outstanding issues related to the management
of the module clocks and power control for the various blocks, which
will be done in a separate patch.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: don't touch i2c master registers on au8522

Some stray lines got inserted into the driver when I reverse engineered
the I2C traffic (at the time I didn't know what the registers did).

It turns up these registers muck with the onboard I2C master, which
we don't use since we instead use the I2C gate.  Remove the lines
which can actually interfere with the operation of the bus.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] au8522: don't attempt to configure unsupported VBI slicer

Since we don't suppoort sliced VBI with the au0828/au8522, there is
no need to configure the au8522 VBI slicer, which because of the
coefficients requires a large amount of i2c traffic.

Remove the relevant code.  Note that this has no effect on raw VBI
support, which is currently the only supported way to access VBI on
this device.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: s5p-cec: Fixed spelling mistake

Fixed spelling mistake of "successfully"

Signed-off-by: Rene Hickersberger <renehickersberger@gmx.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec: stih: fix typos in comments

Minor fixes in comments

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec: stih: allow to use max CEC logical addresses

Hardware could support up to 16 logical addresses which is more
than needed by CEC specifications.
Let use CEC_MAX_LOG_ADDRS instead of limited it on one.
stih_cec_adap_log_addr() function was alredy written to support
multiple addresses requests.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: platform: coda: remove variable self assignment

Remove variable self assignment.

Addresses-Coverity-ID: 1408817

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] usbvision: add missing USB-descriptor endianness conversions

Add the missing endianness conversions to a debug call printing the
USB device-descriptor idVendor and idProduct fields during probe.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-ioctl.c: always copy G/S_EDID result

The VIDIOC_G/S_EDID ioctls can return valid data even if an error is returned.

Mark those ioctls accordingly. Rather than using an explicit 'if' to check for the
ioctl (as was done until now for VIDIOC_QUERY_DV_TIMINGS) just set a new flag in the
v4l2_ioctls array.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pxa_camera: Fix a call with an uninitialized device pointer

In 'commit 295ab497d6357 ("[media] media: platform: pxa_camera: make
printk consistent")' a pointer to the device structure in
mclk_get_divisor() was changed to pcdev_to_dev(pcdev). The pointer used
by pcdev_to_dev() is still uninitialized during the call to
mclk_get_divisor() as it happens in v4l2_device_register() at the end
of the probe. The dev_warn and dev_dbg caused a line in the log:

(NULL device *): Limiting master clock to 26000000

Fix this by using an initialized pointer from the platform_device
(as before the old patch).

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pxa_camera: Add (un)subscribe_event ioctl

The v4l2-compliance complains about nonexistent vidioc_subscribe_event
and vidioc_unsubscribe_event calls. Add them to fix the complaints.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pxa_camera: Fix incorrect test in the image size generation

During the transfer from the soc_camera a test in pxa_mbus_image_size()
got removed. Without it any PXA_MBUS_LAYOUT_PACKED format causes either
the return of a wrong value (PXA_MBUS_PACKING_2X8_PADHI doubles
the correct value) or EINVAL (PXA_MBUS_PACKING_NONE and
PXA_MBUS_PACKING_EXTEND16). This was observed in an error from the ffmpeg
(for some of the YUYV subvariants).

This patch re-adds the same test as in soc_camera version.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pxa_camera: Add remaining Bayer 8 formats

This patch adds Bayer 8 GBRG and RGGB support and move GRBG definition
close to BGGR (so all Bayer 8 variants are together). No other changes are
needed as the driver handles them as RAW data stream.

The RGGB variant was tested in a modified OV9640 driver.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: Add iFunction or iInterface to device names

Permits distinguishing between two /dev/videoX entries from the same
physical UVC device (that naturally share the same iProduct name).

This change matches current Windows behavior by prioritizing iFunction
over iInterface, but unlike Windows it displays both iProduct and
iFunction/iInterface strings when both are available.

Signed-off-by: Peter Boström <pbos@google.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: Quirk for webcam in MacBook Pro 2016

Add the probe def quirk for the webcam found in the Apple MacBook Pro
2016, to get it working out of the box.

Signed-off-by: Daniel Roschka <danielroschka@phoenitydawn.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] em28xx: fix+improve the register (usb control message) debugging

- avoid duplicate debugging messages in em28xx_read_reg_req_len()
- do not describe successful usb transfers in em28xx_read_reg_len()
  as "failed"
- report errors in em28xx_write_regs_req(), too
- print the usb error numbers, too

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx18: fix spelling mistake: "demodualtor" -> "demodulator"

trivial fix to spelling mistake and add in a white space in
a CX18_ERR error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx25840: fix unchecked return values

In functions cx25840_initialize(), cx231xx_initialize(), and
cx23885_initialize(), the return value of create_singlethread_workqueue()
is used without validation. This may result in NULL dereference and cause
kernel crash. This patch fixes it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cobalt: fix unchecked return values

Function pci_find_ext_capability() may return 0, which is an invalid
address. In function cobalt_pcie_status_show(), its return value is used
without validation. This patch adds checks to validate the return
address.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] m5602_s5k83a: check return value of kthread_create

Function kthread_create() returns an ERR_PTR on error. However, in
function s5k83a_start(), its return value is used without validation.
This may result in a bad memory access bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mxl111sf: Fix driver to use heap allocate buffers for USB messages

The recent changes in 4.9 to mandate USB buffers be heap allocated
broke this driver, which was allocating the buffers on the stack.
This resulted in the device failing at initialization.

Introduce dedicated send/receive buffers as part of the state
structure, and add a mutex to protect access to them.

Note: we also had to tweak the API to mxl111sf_ctrl_msg to pass
the pointer to the state struct rather than the device, since
we need it inside the function to access the buffers and the
mutex.  This patch adjusts the callers to match the API change.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Reported-by: Doug Lung <dlung0@gmail.com>
Cc: Michael Ira Krufky <mkrufky@linuxtv.org>
Cc: <stable@vger.kernel.org> # for v4.5 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atmel-isc: Set the default DMA memory burst size

Sometimes 'DMA single access' is not enough to transfer
a frame of image, '8-beat burst access' is set as the
default DMA memory burst size.

Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx88: Fix regression in initial video standard setting

Setting initial standard at the top of cx8800_initdev would cause the
first call to cx88_set_tvnorm() to return without programming any
registers (leaving the driver saying it's set to NTSC but the hardware
isn't programmed).  Even worse, any subsequent attempt to explicitly
set it to NTSC-M will return success but actually fail to program the
underlying registers unless first changing the standard to something
other than NTSC-M.

Set the initial standard later in the process, and make sure the field
is zero at the beginning to ensure that the call always goes through.

This regression was introduced in the following commit:

commit ccd6f1d488e7 ("[media] cx88: move width, height and field to core
struct")

Author: Hans Verkuil <hans.verkuil@cisco.com>

[media] cx88: move width, height and field to core struct

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] stm32-dcmi: STM32 DCMI camera interface driver

This V4L2 subdev driver enables Digital Camera Memory Interface (DCMI)
of STMicroelectronics STM32 SoC series.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dt-bindings: Document STM32 DCMI bindings

This adds documentation of device tree bindings for the STM32 DCMI
(Digital Camera Memory Interface).

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: annotate a switch fall through

Without annotations, gcc 7.1 will complain.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] s2255drv: avoid a switch fall through

On this driver, it can fall through a switch. I tried to
annotate it, in order to shut up a gcc warning, but that
didn't work, as the logic there is somewhat complex.

So, instead, let's just repeat the code. gcc should likely
optimize it anyway, and this makes the code better readable,
IMHO.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] soc_camera: annotate a switch fall through

Clearly, hsync and vsinc bool vars are part of the return
logic on the second case of the switch. Annotate that, in
order to shut up gcc warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] zoran: annotate switch fall through

There are two cases here that it does a switch fall through.
Annotate it, in order to shut up gcc warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] av7110: avoid switch fall through

On two switches, this driver have unannotated switch
fall through.

in the first case, it falls through a return. On the second
one, it prints undesired log messages on fall through.

Solve that by copying the commands that it should be
running. Gcc will very likely optimize it anyway, so this
sholdn't be causing any harm, and shuts up gcc warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: disable several warnings when W=1

The atomisp currently produce hundreds of warnings when W=1.

It is a known fact that this driver is currently in bad
shape, and there are lot of things to be done here.

We don't want to be bothered by those "minor" stuff for now,
while the driver doesn't receive a major cleanup. So,
disable those warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mtk_vcodec_dec: return error at mtk_vdec_pic_info_update()

Gcc 7.1 complains that:

drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c: In function 'mtk_vdec_pic_info_update':
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:284:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^~~

Indeed, if debug is disabled, "ret" is never used. The best
fix for it seems to make the fuction to return an error code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] s5p-jpeg: don't return a random width/height

Gcc 7.1 complains about:

drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9':
drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized]
  result->w = width;
  ~~~~~~~~~~^~~~~~~
drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized]
  result->h = height;
  ~~~~~~~~~~^~~~~~~~

Indeed the code would allow it to return a random value (although
it shouldn't happen, in practice). So, explicitly set both to zero,
just in case.

Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media drivers: annotate fall-through

Avoid warnings like those:

drivers/media/pci/ddbridge/ddbridge-core.c: In function 'dvb_input_detach':
drivers/media/pci/ddbridge/ddbridge-core.c:787:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (input->fe) {
      ^
drivers/media/pci/ddbridge/ddbridge-core.c:792:2: note: here
  case 4:
  ^~~~
...

On several cases, it is just that gcc 7.1 is not capable of
understanding the comment, but on other places, we need an
annotation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dvb-usb-remote: don't write bogus debug messages

When a REMOTE_KEY_PRESSED event happens, it does the right
thing. However, if debug is enabled, it will print a bogus
message warning that "key repeated".

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] bt8xx: add missing break

The logic that handles CA_SET_PID is clearly missing a
break: it prints that the command succeeded, but, due to the
missing break, it would be returning -EOPNOTSUPP, as if the
driver weren't supporting such ioctl.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] saa7164: better handle error codes

Right now, the driver is doing the right thing for
PVC_ERRORCODE_UNKNOWN and PVC_ERRORCODE_INVALID_CONTROL:
for both, it returns an error code (SAA_ERR_NOT_SUPPORTED).

However, it is printing two error messages instead of one
on those cases.

Fix the logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] bcm3510: fix handling of VSB16 modulation

There's a missing break for VSB16 modulation logic, with would
cause it to return -EINVAL, instead of handling it.

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ir-core: fix gcc-7 warning on bool arithmetic

gcc-7 suggests that an expression using a bitwise not and a bitmask
on a 'bool' variable is better written using boolean logic:

drivers/media/rc/imon.c: In function 'imon_incoming_scancode':
drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation]
    ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
                      ^
drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not?

I agree.

Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: fix missing blank line coding style issue in atomisp_tpg.c

This is a patch to the atomisp_tpg.c file that fixes up a missing
blank line warning found by the checkpatch.pl tool

Signed-off-by: Manny Vindiola <mannyv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: putting NULs in the wrong place

We're putting the NUL terminators one space beyond where they belong.
This doesn't show up in testing because all but the callers put a NUL in
the correct place themselves.  LOL.  It causes a static checker warning
about buffer overflows.

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: one char read beyond end of string

We should verify that "ix < max_len" before we test whether we have
reached the NUL terminator.

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: Fix -Werror=int-in-bool-context compile errors

With gcc-7.1.1 I was getting the following compile error:

error: ‘*’ in boolean context, suggest ‘&&’ instead

The problem is the definition of CEIL_DIV:
 #define CEIL_DIV(a, b)       ((b) ? ((a) + (b) - 1) / (b) : 0)

Which when called as: CEIL_DIV(x, y * z) triggers this error, note
we cannot do as the error suggests since b is evaluated multiple times.

This commit fixes these compile errors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: Make undeclared symbols static

Fix sparse warnings: "symbol not declared; should it be static?"

Signed-off-by: Guru Das Srinagesh <gurooodas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: fix coding style warnings

Fix for warnings reported by checkpatch.pl:
 - Multiline comment style
 - Bare "unsigned"
 - Missing blank line after declarations
 - Un-needed braces around single-statement branch

Signed-off-by: Avraham Shukron <avraham.shukron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: fixed coding style errors

Fix for error (not warnings) reported by checkpatch.pl
Specifically:
 - missing whitespace around "=" and after ","
 - indentation with spaces instead of tabs
 - lines starting with a whitespace

This patch does not affect the compiled code in any way.

Signed-off-by: Avraham Shukron <avraham.shukron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: drop unused qos variable

Fixes a sparse warning:

drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c:35:5: warning: symbol 'qos' was not declared. Should it be static?

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: fixed sparse warnings

Added "static" storage class to 4 not-declared functions

Signed-off-by: Avraham Shukron <avraham.shukron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[media] atomisp: Fix unnecessary initialization of static

Fix checkpatch warning: removed unnecessary initialization of
static variable "skip_fwload" to 0 in source atomisp_v4l2.c

Signed-off-by: Fabrizio Perria <fabrizio.perria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: use logical AND, not bitwise

Fixes sparse warning "dubious: x & !y" in logical expression.

Signed-off-by: Guru Das Srinagesh <gurooodas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: Add __printf validation and fix fallout

__printf validation adds format and argument validation.

Fix the various broken format/argument mismatches.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tc358743: fix register i2c_rd/wr function fix

The below mentioned fix contains a small but severe bug,
fix it to make the driver work again.

Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions")

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE

Fix a link error in this specific combination of config options:

CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CORE=m
CONFIG_MEDIA_CEC_NOTIFIER=y
CONFIG_VIDEO_STI_HDMI_CEC=m
CONFIG_DRM_STI=y

drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove':
sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to
`cec_notifier_set_phys_addr'
sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to
`cec_notifier_put'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes':
sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined
reference to `cec_notifier_set_phys_addr_from_edid'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe':
sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to
`cec_notifier_get'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect':
sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference
to `cec_notifier_set_phys_addr'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable':
sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to
`cec_notifier_set_phys_addr'

The version below seems to work, though I don't particularly
like the IS_REACHABLE() addition since that can be confusing
to users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vb2: Fix an off by one error in 'vb2_plane_vaddr'

We should ensure that 'plane_no' is '< vb->num_planes' as done in
'vb2_plane_cookie' just a few lines below.

Fixes: e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework")

Cc: stable@vger.kernel.org
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] s5p-cec: remove unused including <linux/version.h>

Remove including <linux/version.h> that is not needed.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rainshadow-cec: Fix missing spin_lock_init()

The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

This is detected by Coccinelle semantic patch.

Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI
CEC driver")

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pxa_camera: fix module remove codepath for v4l2 clock

The conversion from soc_camera omitted a correct handling of the clock
gating for a sensor. When the pxa_camera driver module was removed it
tried to unregister clk, but this caused a similar warning:

  WARNING: CPU: 0 PID: 6740 at drivers/media/v4l2-core/v4l2-clk.c:278
  v4l2_clk_unregister(): Refusing to unregister ref-counted 0-0030 clock!

The clock was at time still refcounted by the sensor driver. Before
the removing of the pxa_camera the clock must be dropped by the sensor
driver. This should be triggered by v4l2_async_notifier_unregister() call
which removes sensor driver module too, calls unbind() function and then
tries to probe sensor driver again. Inside unbind() we can safely
unregister the v4l2 clock as the sensor driver got removed. The original
v4l2_clk_unregister() should be put inside test as the clock can be
already unregistered from unbind(). If there was not any bound sensor
the clock is still present.

The codepath is practically a copy from the old soc_camera. The bug was
tested with a pxa_camera+ov9640 combination during the conversion
of the ov9640 from the soc_camera.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec: improve MEDIA_CEC_RC dependencies

Changing the IS_REACHABLE() into a plain #ifdef broke the case of
CONFIG_MEDIA_RC=m && CONFIG_MEDIA_CEC=y:

drivers/media/cec/cec-core.o: In function `cec_unregister_adapter':
cec-core.c:(.text.cec_unregister_adapter+0x18): undefined reference to `rc_unregister_device'
drivers/media/cec/cec-core.o: In function `cec_delete_adapter':
cec-core.c:(.text.cec_delete_adapter+0x54): undefined reference to `rc_free_device'
drivers/media/cec/cec-core.o: In function `cec_register_adapter':
cec-core.c:(.text.cec_register_adapter+0x94): undefined reference to `rc_register_device'
cec-core.c:(.text.cec_register_adapter+0xa4): undefined reference to `rc_free_device'
cec-core.c:(.text.cec_register_adapter+0x110): undefined reference to `rc_unregister_device'
drivers/media/cec/cec-core.o: In function `cec_allocate_adapter':
cec-core.c:(.text.cec_allocate_adapter+0x234): undefined reference to `rc_allocate_device'
drivers/media/cec/cec-adap.o: In function `cec_received_msg':
cec-adap.c:(.text.cec_received_msg+0x734): undefined reference to `rc_keydown'
cec-adap.c:(.text.cec_received_msg+0x768): undefined reference to `rc_keyup'

This adds an additional dependency to explicitly forbid this combination.

Fixes: 5f2c467c54f5 ("[media] cec: add MEDIA_CEC_RC config option")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning

The barrier implied by spin_unlock() in rain_irq_work_handler makes it hard
for gcc to figure out the state of the variables, leading to a false-positive
warning:

drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_irq_work_handler':
drivers/media/usb/rainshadow-cec/rainshadow-cec.c:171:31: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Slightly rearranging the code makes it easier for the compiler to see that the
code is correct, and gets rid of the warning.

Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rainshadow-cec: use strlcat instead of strncat

gcc warns about an obviously incorrect use of strncat():

drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_cec_adap_transmit':
drivers/media/usb/rainshadow-cec/rainshadow-cec.c:299:4: error: specified bound 48 equals the size of the destination [-Werror=stringop-overflow=]

It seems that strlcat was intended here, and using that makes the
code correct.

Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ir-lirc-codec: let lirc_dev handle the lirc_buffer

ir_lirc_register() currently creates its own lirc_buffer before
passing the lirc_driver to lirc_register_driver().

When a module is later unloaded, ir_lirc_unregister() gets called
which performs a call to lirc_unregister_driver() and then free():s
the lirc_buffer.

The problem is that:

a) there can still be a userspace app holding an open lirc fd
   when lirc_unregister_driver() returns; and

b) the lirc_buffer contains "wait_queue_head_t wait_poll" which
   is potentially used as long as any userspace app is still around.

The result is an oops which can be triggered quite easily by a
userspace app monitoring its lirc fd using epoll() and not closing
the fd promptly on device removal.

The minimalistic fix is to let lirc_dev create the lirc_buffer since
lirc_dev will then also free the buffer once it believes it is safe to
do so.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-core: fix input repeat handling

The call to input_register_device() needs to take place
before the repeat parameters are set or the input subsystem
repeat handling will be disabled (as was already noted in
the comments in that function).

Cc: stable <stable@vger.kernel.org> # v4.11
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] sir_ir: infinite loop in interrupt handler

Since this driver does no detection of hardware, it might be used with
a non-sir port. Escape out if we are spinning.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atomisp: don't treat warnings as errors

Several atomisp files use:
 ccflags-y += -Werror

As, on media, our usual procedure is to use W=1, and atomisp
has *a lot* of warnings with such flag enabled,like:

./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=]

At the end, it causes our build to fail, impacting our workflow.

So, remove this crap. If one wants to force -Werror, he
can still build with it enabled by passing a parameter to
make.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>