GitHub/exynos8895/android_kernel_samsung_universal8895.git
12 years agoTTY: simserial, use tty_port_hangup
Jiri Slaby [Mon, 5 Mar 2012 13:52:38 +0000 (14:52 +0100)]
TTY: simserial, use tty_port_hangup

Convert shutdown to be tty_port_operations->shutdown. Then we can use
tty_port_hangup. (And we have to use tty_port_close.)

This means we no longer touch ASYNC_INITIALIZED, TTY_IO_ERROR. Also we
do not need to do any peculiar TTY logic in the file now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, use tty_port_open
Jiri Slaby [Mon, 5 Mar 2012 13:52:37 +0000 (14:52 +0100)]
TTY: simserial, use tty_port_open

So now we convert startup to be ->activate of tty_port. This means we
no longer care about INITIALIZED and TTY_IO_ERROR flags.

After we have ->activate much of the code may go as it duplicates what
tty_port_open does. In this case tty_port_open adds block_til_ready to
the path. But we do not define carrier hooks, so it is a noop.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, properly refcount tty_port->tty
Jiri Slaby [Mon, 5 Mar 2012 13:52:36 +0000 (14:52 +0100)]
TTY: simserial, properly refcount tty_port->tty

So that we will not be surprised in the ISR anymore.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, use tty_port_close_start
Jiri Slaby [Mon, 5 Mar 2012 13:52:35 +0000 (14:52 +0100)]
TTY: simserial, use tty_port_close_start

I.e. remove more copied bloat.

The only change is that we wait_until_sent now. Which is what we
really should do.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, use tty_port_close_end
Jiri Slaby [Mon, 5 Mar 2012 13:52:34 +0000 (14:52 +0100)]
TTY: simserial, use tty_port_close_end

The code is identical except locking. But added locks to protect
counts do not hurt here. Rather the contrary.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, remove some tty ops
Jiri Slaby [Mon, 5 Mar 2012 13:52:33 +0000 (14:52 +0100)]
TTY: simserial, remove some tty ops

All ->start, ->stop and ->wait_until_sent are empty and need not be
defined. The time to remove them is now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, define local tty_port pointer
Jiri Slaby [Mon, 5 Mar 2012 13:52:32 +0000 (14:52 +0100)]
TTY: simserial, define local tty_port pointer

And use it to make the code more readable.

Since tport doesn't conflict with port anymore and there are not many
tport accessors left, do also s/\<tport\>/port/g.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial no longer needs serialP
Jiri Slaby [Mon, 5 Mar 2012 13:52:31 +0000 (14:52 +0100)]
TTY: simserial no longer needs serialP

Let's do a spin-off of serial_state structure with only needed
elements.

And remove serialP crap from includes.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, stop using serial_state->{line,icount}
Jiri Slaby [Mon, 5 Mar 2012 13:52:30 +0000 (14:52 +0100)]
TTY: simserial, stop using serial_state->{line,icount}

* instead of line, use tty->index or an iterator
* icount is not made public, only the tx path increments it

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, remove tmp_buf
Jiri Slaby [Mon, 5 Mar 2012 13:52:29 +0000 (14:52 +0100)]
TTY: simserial, remove tmp_buf

It is totally unused.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, remove static initialization
Jiri Slaby [Mon, 5 Mar 2012 13:52:28 +0000 (14:52 +0100)]
TTY: simserial, remove static initialization

We do not use any of the preinitialized rs_state members for something
real. So there is no need to initialize them. At the places we used
them for printing, just print the values.

And since only one port is supported, get rid of the loop. This
simplifies simrs_init a heap. Thus we can handle fail paths in a
standard way without panicing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial/simserial, use flags from tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:52:27 +0000 (14:52 +0100)]
TTY: amiserial/simserial, use flags from tty_port

This changes flags' type to ulong which is appropriate for all the
set/clear_bits performed in the drivers..

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial/simserial, use count from tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:52:26 +0000 (14:52 +0100)]
TTY: amiserial/simserial, use count from tty_port

Nothing special. Just remove count from serial_state and change all
users to use tty_port.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial/simserial, use close delays from tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:52:25 +0000 (14:52 +0100)]
TTY: amiserial/simserial, use close delays from tty_port

Note that previously simserial set the delay to 0. So we preserve
that. BUT, is it correct?

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial/simserial, use tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:52:24 +0000 (14:52 +0100)]
TTY: amiserial/simserial, use tty_port

Add tty_port to serial_state and start using common tty port members
from tty_port in amiserial and simserial. The rest will follow one by
one.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, pass tty down to functions
Jiri Slaby [Mon, 5 Mar 2012 13:52:23 +0000 (14:52 +0100)]
TTY: simserial, pass tty down to functions

This avoids pain with tty refcounting and touching tty_port in the
future. It allows us to remove some state->tty tests because the tty
passed down to them can never be NULL.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial, pass tty down to functions
Jiri Slaby [Mon, 5 Mar 2012 13:52:22 +0000 (14:52 +0100)]
TTY: amiserial, pass tty down to functions

This avoids pain with tty refcounting and touching tty_port in the
future. It allows us to remove some info->tty tests because the tty
passed down to them can never be NULL.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial, simplify set_serial_info
Jiri Slaby [Mon, 5 Mar 2012 13:52:21 +0000 (14:52 +0100)]
TTY: amiserial, simplify set_serial_info

Do not copy whole serial_state. We only need to know whether the speed
is to be changed. Hence store the info in advance and use it later.
A simple bool is enough.

Also remove reduntant assignments and move the tests directly to the
'if'.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serialP, merge serial_state and async_struct
Jiri Slaby [Mon, 5 Mar 2012 13:52:20 +0000 (14:52 +0100)]
TTY: serialP, merge serial_state and async_struct

This is the final step to get rid of the one of the structures.  A
further cleanup will follow. And I struct serial_state deserves cease
to exist after a switch to tty_port too.

While changing the lines, it removes also pointless tty->driver_data
casts.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial, remove IRQ_ports
Jiri Slaby [Mon, 5 Mar 2012 13:52:19 +0000 (14:52 +0100)]
TTY: amiserial, remove IRQ_ports

They used to work as a storage for 'info' pointer used in ISRs.  They
are not really needed. Just pass the pointer through request_irq to
the handlers.

It was set to NULL and tested in the ISRs, but we do not need the
tests as we disable all the interrupts at the same places where NULL
sets were.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, remove IRQ_T
Jiri Slaby [Mon, 5 Mar 2012 13:52:18 +0000 (14:52 +0100)]
TTY: simserial, remove IRQ_T

We do not set ASYNC_SHARE_IRQ anywhere. And since IRQF_DISABLED is a
noop, pass zero to request_irq directly instead of this ugly macro.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, remove support of shared interrupts
Jiri Slaby [Mon, 5 Mar 2012 13:52:17 +0000 (14:52 +0100)]
TTY: simserial, remove support of shared interrupts

It never worked there. The ISR was never written for that kind of
stuff. So remove all that crap with a hash of linked lists and pass
the pointer directly to the ISR.

BTW this answers the question there:
  * I don't know exactly why they don't use the dev_id opaque data
  * pointer instead of this extra lookup table

-> Because they thought they will support more devices bound to a
single interrupt w/o IRQF_SHARED. They would need exactly the hash
there.

What I don't understand is rebinding of the interrupt in the shutdown
path. They perhaps meant to do just synchronize_irq? In any case, this
is all gone and free_irq there properly.

By removing the hash we save some bits (exactly NR_IRQS * 8 bytes of
.bss and over a kilo of .text):
before:
   text    data     bss     dec     hex filename
  19600     320    8227   28147    6df3 ../a/ia64/arch/ia64/hp/sim/simserial.o
after:
   text    data     bss     dec     hex filename
  18568     320      28   18916    49e4 ../a/ia64/arch/ia64/hp/sim/simserial.o

Note that a shared interrupt could not work too. request_irq requires
data parameter to be non-NULL. So the whole IRQ_T exercise was
pointless.

Finally, this helps us remove another two members of async_struct :).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial/amiserial, use one instance of other members
Jiri Slaby [Mon, 5 Mar 2012 13:52:16 +0000 (14:52 +0100)]
TTY: simserial/amiserial, use one instance of other members

This means:
* close_delay
* closing_wait
* line
* port
* xmit_fifo_size

This actually fixes a bug in amiserial. It initializes one and uses
the other of the close delays. Yes, duplicating structure members is
evil.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simserial, use only one copy of async flags
Jiri Slaby [Mon, 5 Mar 2012 13:52:15 +0000 (14:52 +0100)]
TTY: simserial, use only one copy of async flags

The same as for amiserial. Use only one instance of the flags.

Also remove them from async_struct now. Nobody else uses them.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agosimserial, bail out when request_irq fails
Jiri Slaby [Thu, 8 Mar 2012 20:01:19 +0000 (21:01 +0100)]
simserial, bail out when request_irq fails

Without this, the code succeeds when the port is opened by root and we
get unwanted interrupts storm on the first key stroke.

Instead of that, tell the user we failed and that we won't continue. I
suppose, the code was copied from the serial layer where we may want
to change the irq number, so we must allow open even of the failing
port. This is not the case for this driver at all.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohpsim, initialize chip for assigned irqs
Jiri Slaby [Thu, 8 Mar 2012 20:01:18 +0000 (21:01 +0100)]
hpsim, initialize chip for assigned irqs

Currently, when assign_irq_vector is called and the irq connected in
the simulator, the irq is not ready. request_irq will return ENOSYS
immediately. It is because the irq chip is unset.

Hence set the chip properly to irq_type_hp_sim. And make sure this is
done from both users of simulated interrupts.

Also we have to set handler here, otherwise we end up in
handle_bad_int resulting in spam in logs and no irqs handled. We use
handle_simple_irq as these are SW interrupts that need no ACK or
anything.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agosimserial, include some headers
Jiri Slaby [Thu, 8 Mar 2012 20:01:17 +0000 (21:01 +0100)]
simserial, include some headers

And remove declarations which are already in the headers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohpsim, fix SAL handling in fw-emu
Jiri Slaby [Thu, 8 Mar 2012 20:01:16 +0000 (21:01 +0100)]
hpsim, fix SAL handling in fw-emu

The switch-cases of SAL_FREQ_BASE generate non-relocatable code. The
same as for the ifs one level upper. This causes oopses early in boot
because the kernel jumps to the hell instead of the offset in sal
callback.

So use ifs here for SAL_FREQ_BASE decision too.

Isn't there any compiler directive or settings to solve that cleanly?

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial, use only one copy of async flags
Jiri Slaby [Mon, 5 Mar 2012 13:52:14 +0000 (14:52 +0100)]
TTY: amiserial, use only one copy of async flags

Huh, why would one want to store two copies of them? Get rid of the
one from async_struct. That structure is going away as a whole soon.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: amiserial, remove tasklet for tty_wakeup
Jiri Slaby [Mon, 5 Mar 2012 13:52:13 +0000 (14:52 +0100)]
TTY: amiserial, remove tasklet for tty_wakeup

tty_wakeup is safe to be called from all contexts. No need to schedule
a tasklet for that. Let's call it directly like in other drivers.

This allows us to kill another member of async_struct structure. (If
we remove the dummy uses in simserial.)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serialP, remove unused material
Jiri Slaby [Mon, 5 Mar 2012 13:52:12 +0000 (14:52 +0100)]
TTY: serialP, remove unused material

First, remove unused macro and rs_multiport_struct structure. Nobody
uses them at all.

Further, the 2 drivers (they are below) which use the rest of
structures from serialP.h (async_struct and serial_state) do not use
all the members. Remove the members:
* which are unused or
* which are only initialized and never used for something real.

Everybody should avoid the structures with a looong distance.

Finally, remove the ALPHA kludge MCR quirks. They are 1:1 copy from
8250.h. No need to redefine them here.

The 2 promised users of the structures:
arch/ia64/hp/sim/simserial.c
drivers/tty/amiserial.c

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: speakup, do not use serialP
Jiri Slaby [Mon, 5 Mar 2012 13:52:11 +0000 (14:52 +0100)]
TTY: speakup, do not use serialP

The structures there are going away. And speakup has enough troubles
already.

So define a structure similar to what 8250 does: old_serial_port.
There define an array of speed, port base and so on needed for
configuration. Then use this structure instead of serial_state defined
in serialP.h.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@braille.uwo.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: remove serialP.h inclusion from some files
Jiri Slaby [Mon, 5 Mar 2012 13:52:10 +0000 (14:52 +0100)]
TTY: remove serialP.h inclusion from some files

All of them do not use the ugly interface defined in that header.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serial, include pci.h in m32r_sio
Jiri Slaby [Mon, 5 Mar 2012 13:52:09 +0000 (14:52 +0100)]
TTY: serial, include pci.h in m32r_sio

It uses pointers to pci_dev, but compiler complains it doesn't know
it:
In file included from .../m32r_sio.c:53:
.../m32r_sio.h:21: warning: "struct pci_dev" declared inside parameter list
.../m32r_sio.h:21: warning: its scope is only this definition or declaration, which is probably not what you want
.../m32r_sio.h:22: warning: "struct pci_dev" declared inside parameter list

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serial, use atomic_inc_return in ioc4_serial
Jiri Slaby [Mon, 5 Mar 2012 13:52:08 +0000 (14:52 +0100)]
TTY: serial, use atomic_inc_return in ioc4_serial

We want to know the value of the atomic variable in intr_connect after
the increment. But atomic_inc doesn't, per definition, return the
value.  It is just a pure coincidence that ia64 defines atomic_inc as
atomic_inc_return.

So fix this mistake by using atomic_inc_return properly.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: iss/console, use tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:52:07 +0000 (14:52 +0100)]
TTY: iss/console, use tty_port

Even though the port is not used for anything real there yet, this
will change as tty buffers will be in tty_port in the near future. So
the port will be needed in all drivers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoXTENSA: iss/console, fix potential deadlock
Jiri Slaby [Mon, 5 Mar 2012 13:52:06 +0000 (14:52 +0100)]
XTENSA: iss/console, fix potential deadlock

If the timer ticks while we are holding the spinlock, the system
deadlocks. It is due to synchronous del_timer.

So to fix that, use spinlocks that properly disable bottom halves.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoXTENSA: iss/console, use setup_timer
Jiri Slaby [Mon, 5 Mar 2012 13:52:05 +0000 (14:52 +0100)]
XTENSA: iss/console, use setup_timer

Use setup_timer instead of explicit assignments.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoNET: pc300, show version info from module init
Jiri Slaby [Mon, 5 Mar 2012 13:52:04 +0000 (14:52 +0100)]
NET: pc300, show version info from module init

Again, no need to do that from the pci probe function.

Hmm, I noticed this driver is marked as BROKEN. Won't touch it more,
it has to be converted to dynamic tty driver allocation first.

Perhaps it is time to move it to staging?

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoNET: pc300, do not zero global variables
Jiri Slaby [Mon, 5 Mar 2012 13:52:03 +0000 (14:52 +0100)]
NET: pc300, do not zero global variables

They are in .bss which is initialized to zeros when the module is
loaded/kernel booted.

What a strange way to do the initialization once in the pci probe
routine...

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: ipwireless, fix tty->index handling
Jiri Slaby [Mon, 5 Mar 2012 13:52:02 +0000 (14:52 +0100)]
TTY: ipwireless, fix tty->index handling

* do not test if tty->index is in bounds. It is always.
* tty->index is not a minor! Fix that.

>From now on, let's assume that the parameter of the function is tty
index with base being zero. This makes also the code more readable.

Factually, there is no real change as tty_driver->minor_start is zero,
so the tests are equivalent. But it did not make sense. And if this
had changed eventually, it would have caused troubles.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: remove unneeded tty->index checks
Jiri Slaby [Mon, 5 Mar 2012 13:52:01 +0000 (14:52 +0100)]
TTY: remove unneeded tty->index checks

Checking if tty->index is in bounds is not needed. The tty has the
index set in the initial open. This is done in get_tty_driver. And it
can be only in interval <0,driver->num).

So remove the tests which check exactly this interval. Some are
left untouched as they check against the current backing device count.
(Leaving apart that the check is racy in most of the cases.)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serialP, remove DECLARE_WAITQUEUE check
Jiri Slaby [Mon, 5 Mar 2012 13:52:00 +0000 (14:52 +0100)]
TTY: serialP, remove DECLARE_WAITQUEUE check

The macro is always defined now. This was there only for historical
reasons.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: srmcons, convert to use tty_port
Jiri Slaby [Mon, 5 Mar 2012 13:51:59 +0000 (14:51 +0100)]
TTY: srmcons, convert to use tty_port

This is needed because the tty buffer will become a tty_port member
later. That will help us to wipe out most of the races and checks for
the tty pointer in hot paths.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoALPHA: srmcons, fix racy singleton structure
Jiri Slaby [Mon, 5 Mar 2012 13:51:58 +0000 (14:51 +0100)]
ALPHA: srmcons, fix racy singleton structure

The test and the assignment were racy. Make it really a singleton.
This is achieved by one global variable initialized at the module
init.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoALPHA: srmcons, use timer functions
Jiri Slaby [Mon, 5 Mar 2012 13:51:57 +0000 (14:51 +0100)]
ALPHA: srmcons, use timer functions

It makes the code more readable. We move the setup to the allocation
location because we need to initialize timers only once.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: tty_driver, document tty->ops->shutdown limitation
Jiri Slaby [Mon, 5 Mar 2012 13:51:56 +0000 (14:51 +0100)]
TTY: tty_driver, document tty->ops->shutdown limitation

Note that tty->ops->shutdown is called from whatever context the user
drops the last tty reference from. E.g. if one takes a reference in
an ISR, tty close happens on other CPU and the final tty put is from
the ISR, tty->ops->shutdown will be called from that hard irq context.

We would have a problem in vt if we start using tty refcounting from
other contexts than user there. It is because vt's shutdown uses
mutexes. This is yet to be fixed.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: serial, simplify ASYNC_USR_MASK
Jiri Slaby [Mon, 5 Mar 2012 13:51:55 +0000 (14:51 +0100)]
TTY: serial, simplify ASYNC_USR_MASK

By using ASYNC_SPD_MASK instead of the single speed bits.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: remove tty driver re-set from tty_reopen
Jiri Slaby [Mon, 5 Mar 2012 13:51:54 +0000 (14:51 +0100)]
TTY: remove tty driver re-set from tty_reopen

This is from tty_reopen:
    struct tty_driver *driver = tty->driver;
    ...
    tty->driver = driver;
and it doesn't make sense at all. The driver is intended to be set in
initialize_tty_struct from tty_init_dev (initial open). So this set in
tty_reopen is not needed.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: simplify tty_driver_lookup_tty a bit
Jiri Slaby [Mon, 5 Mar 2012 13:51:53 +0000 (14:51 +0100)]
TTY: simplify tty_driver_lookup_tty a bit

Remove the useless local variable and return the value itself.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: remove re-assignments to tty_driver members
Jiri Slaby [Mon, 5 Mar 2012 13:51:52 +0000 (14:51 +0100)]
TTY: remove re-assignments to tty_driver members

All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.

pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: remove minor_num from tty_driver
Jiri Slaby [Mon, 5 Mar 2012 13:51:51 +0000 (14:51 +0100)]
TTY: remove minor_num from tty_driver

It was added back in 2004 and never used for anything real. Remove the
only assignment in the tree as well.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: let alloc_tty_driver deduce the owner automatically
Jiri Slaby [Mon, 5 Mar 2012 13:51:50 +0000 (14:51 +0100)]
TTY: let alloc_tty_driver deduce the owner automatically

Like the rest of the kernel, make a stub from alloc_tty_driver which
calls __alloc_tty_driver with proper owner. This will save us one more
assignment on the driver side.

Also this fixes some drivers which didn't set the owner. This allowed
user to remove the module from the system even though a tty from the
driver is still open.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: tty_io, remove buffer re-assignments
Jiri Slaby [Mon, 5 Mar 2012 13:51:49 +0000 (14:51 +0100)]
TTY: tty_io, remove buffer re-assignments

TTY buffer head and tail are initialized in tty_buffer_init. No need
to do it once again in initialize_tty_struct where tty_buffer_init is
called.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-acm, use tty_standard_install
Jiri Slaby [Mon, 5 Mar 2012 13:51:48 +0000 (14:51 +0100)]
USB: cdc-acm, use tty_standard_install

This is a piece I missed the last time.

Do not copy the functionality all over the tree. Instead, use the
helper the tty layer provides us with.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: tackle the main part of the selection logic
Alan Cox [Fri, 2 Mar 2012 15:00:02 +0000 (15:00 +0000)]
vt: tackle the main part of the selection logic

We leave the existing paste mess alone and just fix up the vt side of
things.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: waitevent is self locked so drop the tty_lock
Alan Cox [Fri, 2 Mar 2012 14:59:49 +0000 (14:59 +0000)]
vt: waitevent is self locked so drop the tty_lock

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: push down tioclinux cases
Alan Cox [Fri, 2 Mar 2012 14:59:37 +0000 (14:59 +0000)]
vt: push down tioclinux cases

Some of this ventures into selection which is still a complete lost cause. We
are not making it any worse. It's completely busted anyway.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: push down the tty lock so we can see what is left to tackle
Alan Cox [Fri, 2 Mar 2012 14:59:20 +0000 (14:59 +0000)]
vt: push down the tty lock so we can see what is left to tackle

At this point we have the tty_lock guarding a couple of oddities, plus the
translation and unimap still.

We also extend the console_lock in a couple of spots where coverage is wrong
and switch vcs_open to use the right lock !

[Fixed the locking issue Jiri reported]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: sort out locking for font handling
Alan Cox [Fri, 2 Mar 2012 14:59:08 +0000 (14:59 +0000)]
vt: sort out locking for font handling

The font methods are console_lock covered. Unfortunately they don't extend
the lock over all the needed tests.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: cyclades: TIOCSERGETLSR should should store to a uint
Dan Carpenter [Mon, 5 Mar 2012 18:07:11 +0000 (21:07 +0300)]
tty: cyclades: TIOCSERGETLSR should should store to a uint

TIOCSERGETLSR should be saved in a uint so the cast here to unsigned
long is a bug.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: serial: OMAP: Fix oops due to NULL pdata in DT boot
Cousson, Benoit [Tue, 28 Feb 2012 17:22:12 +0000 (18:22 +0100)]
tty: serial: OMAP: Fix oops due to NULL pdata in DT boot

The following commit: be4b0281956c5cae4f63f31f11d07625a6988766
(tty: serial: OMAP: block idle while the UART is transferring data in PIO mode),
is introducing an oops if OMAP is booted using device tree blob because
the pdata will not be initialized.

Check if pdata is set before de-referencing it.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt:tackle kbd_table
Alan Cox [Tue, 28 Feb 2012 14:49:23 +0000 (14:49 +0000)]
vt:tackle kbd_table

Keyboard struct lifetime is easy, but the locking is not and is completely
ignored by the existing code. Tackle this one head on

- Make the kbd_table private so we can run down all direct users
- Hoick the relevant ioctl handlers into the keyboard layer
- Lock them with the keyboard lock so they don't change mid keypress
- Add helpers for things like console stop/start so we isolate the poking
  around properly
- Tweak the braille console so it still builds

There are a couple of FIXME locking cases left for ioctls that are so hideous
they should be addressed in a later patch. After this patch the kbd_table is
private and all the keyboard jiggery pokery is in one place.

This update fixes speakup and also a memory leak in the original.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: delete briq_panel.c driver
Greg Kroah-Hartman [Thu, 8 Mar 2012 18:45:55 +0000 (10:45 -0800)]
tty: delete briq_panel.c driver

This driver is broken, as reported by Jiri, and to quote Ben:
Just remove the driver, I don't think anybody cares.
so I'm doing just that here.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: keyboard.c: add uaccess.h to fix a build problem on sparc32
Greg Kroah-Hartman [Mon, 27 Feb 2012 23:18:56 +0000 (15:18 -0800)]
tty: keyboard.c: add uaccess.h to fix a build problem on sparc32

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: tidy a few bits of checkpatch noise
Alan Cox [Fri, 24 Feb 2012 12:47:29 +0000 (12:47 +0000)]
vt: tidy a few bits of checkpatch noise

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovt: lock the accent table
Alan Cox [Fri, 24 Feb 2012 12:47:11 +0000 (12:47 +0000)]
vt: lock the accent table

First step to debletcherising the vt console layer - pick a victim and fix
the locking

This is a nice simple object with its own rules so lets pick it out for
treatment. The user of the table already has a lock so we will also use the
same lock for updates.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoRevert "TTY: pty, remove superfluous ptm test"
Greg Kroah-Hartman [Fri, 24 Feb 2012 21:56:36 +0000 (13:56 -0800)]
Revert "TTY: pty, remove superfluous ptm test"

This reverts commit a50f724a432997321cabb6c9e665c28e34850f78.

Sasha reported that this causes problems, so revert it.

Cc: Alan Cox <alan@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoRevert "TTY: get rid of BTM around devpts_*"
Greg Kroah-Hartman [Fri, 24 Feb 2012 21:55:54 +0000 (13:55 -0800)]
Revert "TTY: get rid of BTM around devpts_*"

This reverts commit d3bda5298aad98c7a27678bdd0dd9d008ab9e685.

Sasha reported that this causes problems, so revert it.

Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoamba-pl011​/dma: Add check for the residue in DMA callback
Chanho Min [Mon, 20 Feb 2012 01:24:40 +0000 (10:24 +0900)]
amba-pl011​/dma: Add check for the residue in DMA callback

In DMA-operated uart, I found that rx data can be taken by the UART
interrupts during the DMA irq handler. pl011_int is occurred just
before it goes inside spin_lock_irq. When it returns to the callback,
DMA buffer already has been flushed. Then, pl011_dma_rx_chars gets
invalid data. So I add check for the residue as the patch bellow.

Signed-off-by: Chanho Min <chanho.min@lge.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: samsung: fix s3c2442 platform data
Denis 'GNUtoo' Carikli [Thu, 23 Feb 2012 07:23:52 +0000 (08:23 +0100)]
serial: samsung: fix s3c2442 platform data

Without that fix machines having a s3c2442 CPU have something
  like that in dmesg:
    samsung-uart s3c2440-uart.0: could not find driver data
    samsung-uart s3c2440-uart.1: could not find driver data
    samsung-uart s3c2440-uart.2: could not find driver data
  And serial is never initialized.

The previous log was obtained trough early printk on the gta02
  machine.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty/powerpc: early udbg consoles can't be modules
Stephen Rothwell [Sun, 19 Feb 2012 20:22:38 +0000 (07:22 +1100)]
tty/powerpc: early udbg consoles can't be modules

Fixes these build errors:

ERROR: ".udbg_printf" [drivers/tty/ehv_bytechan.ko] undefined!
ERROR: ".register_early_udbg_console" [drivers/tty/ehv_bytechan.ko] undefined!
ERROR: "udbg_putc" [drivers/tty/ehv_bytechan.ko] undefined!

Cc: Timur Tabi <timur@freescale.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: Fix typo in sn_console.c
Masanari Iida [Sat, 18 Feb 2012 10:49:47 +0000 (19:49 +0900)]
serial: Fix typo in sn_console.c

Correct spelling "receieve" to "receive" in
drivers/tty/serial/sn_console.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty/serial/mux.c: linux/tty.h included twice
Danny Kukawka [Wed, 15 Feb 2012 17:55:41 +0000 (18:55 +0100)]
tty/serial/mux.c: linux/tty.h included twice

drivers/tty/serial/mux.c included 'linux/tty.h' twice, remove
the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h
Paul Gortmaker [Thu, 9 Feb 2012 23:48:19 +0000 (18:48 -0500)]
tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h

There are multiple users of this file from different source
paths now, and rather than have ../ paths in include statements,
just move the file to the linux header dir.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoMerge tag 'tty-3.3-rc3' tty-next
Greg Kroah-Hartman [Fri, 10 Feb 2012 18:23:43 +0000 (10:23 -0800)]
Merge tag 'tty-3.3-rc3' tty-next

This is needed to handle the 8250 file merge mess properly for future
patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoMerge tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Thu, 9 Feb 2012 21:52:57 +0000 (13:52 -0800)]
Merge tag 'tty-3.3-rc3' of git://git./linux/kernel/git/gregkh/tty

Serial/TTY fixes for the 3.3-rc3 tree

Just a few new device ids, omap serial driver regression fixes, and a
build fix for the 8250 driver movement.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds
  tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
  tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode
  m32r: relocate drivers back out of 8250 dir
  tty: fix a build failure on sparc
  serial: samsung: Add support for EXYNOS5250
  serial: samsung: Add support for EXYNOS4212 and EXYNOS4412
  drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer

12 years agoMerge tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Thu, 9 Feb 2012 21:52:18 +0000 (13:52 -0800)]
Merge tag 'staging-3.3-rc3' of git://git./linux/kernel/git/gregkh/staging

Staging tree patches for 3.3-rc3

Big things here is the deletion of the Android pmem driver, as it's
obsolete and no one uses it, the gma500 driver as it's already in the
drm portion of the kernel tree, and the pohmelfs filesystem as it's
obsolete and a rewritten version is being proposed for the fs/ section
of the kernel.

Other than that, a smattering of different bugfixes and regressions, and
some omap drm api merge fixups that were needed due to api changes in
the main portion of the drm tree, allowing this code to build properly
again.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  staging: pohmelfs: remove drivers/staging/pohmelfs
  staging: android/ram_console: Don't build on arches w/o ioremap
  staging: r8712u: Use asynchronous firmware loading
  staging: usbip: fix to prevent potentially using uninitialized spinlock
  staging: r8712u: Fix problem when CONFIG_R8712_AP is set
  staging: tidspbridge: fix incorrect free to drv_datap
  staging: tidspbridge: fix bridge_open memory leaks
  staging: android: lowmemorykiller: Don't wait more than one second for a process to die
  MAINTAINERS: staging: iio: add iio information
  staging: zcache: fix serialization bug in zv stats
  staging: fix go7007-usb license
  Staging: android: binder: Fix crashes when sharing a binder file between processes
  Staging: android: Remove pmem driver
  Staging: asus_oled: fix NULL-ptr crash on unloading
  Staging: asus_oled: fix image processing
  Staging: android: binder: Don't call dump_stack in binder_vma_open
  staging: r8712u: Add new Sitecom UsB ID
  zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.
  zcache: fix deadlock condition
  staging: drm/omap: fix locking issue
  ...

12 years agoMerge tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 9 Feb 2012 21:51:36 +0000 (13:51 -0800)]
Merge tag 'driver-core-3.3-rc3' of git://git./linux/kernel/git/gregkh/driver-core

Driver core fixes for the 3.3-rc3 tree.

A few fixes for kobject warnings that have popped up in the cpu hotplug path,
and a regression fix for the speed of the hotplug memory code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver-core: cpu: fix kobject warning when hotplugging a cpu
  ACPI: remove duplicated lines of merging problems with acpi_processor_add
  docbook: fix fatal errors in device-drivers docbook and add DMA Management section
  drivers/base/memory.c: fix memory_dev_init() long delay
  driver core: cpu: remove kernel warning when removing a cpu

12 years agoMerge tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Thu, 9 Feb 2012 21:51:13 +0000 (13:51 -0800)]
Merge tag 'char-misc-3.3-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Minor char-misc fixes for 3.3-rc3

Nothing big here, some Kconfig fixes for the MISC_DEVICES config option
that was being used incorrectly, and some other minor bug fixes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip
  cs5535-mfgpt: don't call __init function from __devinit
  vmw_balloon: fix for a -Wuninitialized warning
  drivers: misc: Remove MISC_DEVICES config option
  c2port: fix build error for duramar2150 due to missing header.

12 years agoMerge tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Thu, 9 Feb 2012 21:50:54 +0000 (13:50 -0800)]
Merge tag 'usb-3.3-rc3' of git://git./linux/kernel/git/gregkh/usb

USB fixes for 3.3-rc3

Here are a few minor USB fixes and a bunch of device id updates for the
USB drivers.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: usbserial: add new PID number (0xa951) to the ftdi driver
  usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  usb: musb: fix a build error on mips
  uwb & wusb & usb wireless controllers: fix kconfig error & build errors
  usb: Skip PCI USB quirk handling for Netlogic XLP
  powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  usb: otg: mv_otg: Add dependence
  usb: host: Distinguish Kconfig text for Freescale controllers
  USB: add new zte 3g-dongle's pid to option.c
  usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  USB: qcserial: don't enable autosuspend
  USB: qcserial: add several new serial devices
  usb: otg: mv_otg: Add dependence
  usb: gadget: zero: fix bug in loopback autoresume handling

12 years agotty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds
Paul Walmsley [Thu, 26 Jan 2012 02:50:56 +0000 (19:50 -0700)]
tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds

The receive FIFO wakeup latency estimate in the omap-serial driver is
three orders of magnitude too small.  This effectively prevents the
MPU from going to a low-power state when CONFIG_CPU_IDLE=y.  This is a
major power management regression and masks some other FIFO-related
bugs in the driver.

Fix by correcting the most egregious problem in the RX wakeup latency
estimate.  There are several other flaws in the estimator; these will
be fixed by a separate patch series intended for 3.4.

The difference in low-power states with this patch can be observed via
debugfs in pm_debug/count.

This estimate does not have any effect when CONFIG_CPU_IDLE=n.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: serial: OMAP: block idle while the UART is transferring data in PIO mode
Paul Walmsley [Thu, 26 Jan 2012 02:50:52 +0000 (19:50 -0700)]
tty: serial: OMAP: block idle while the UART is transferring data in PIO mode

Prevent OMAP UARTs from going idle while they are still transferring
data in PIO mode.  This works around an oversight in the OMAP UART
hardware present in OMAP34xx and earlier: an idle UART won't send a
wakeup when the TX FIFO threshold is reached.  This causes long delays
during data transmission when the MPU powerdomain enters a low-power
mode.  The MPU interrupt controller is not able to respond to
interrupts when it's in a low-power state, so the TX buffer is not
refilled until another wakeup event occurs.

This fix changes the erratum i291 DMA idle workaround.  Rather than
toggling between force-idle and no-idle, it will toggle between
smart-idle and no-idle.  The important part of the workaround is the
no-idle part, so this shouldn't result in any change in behavior.

This fix should work on all OMAP UARTs.  Future patches intended for
the 3.4 merge window will make this workaround conditional on a
"feature" flag, and will use the OMAP36xx+ TX event wakeup support.

Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291
workaround, which led to the development of this approach.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode
Paul Walmsley [Thu, 26 Jan 2012 02:50:36 +0000 (19:50 -0700)]
tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode

In the (default) PIO mode, use a one-byte RX FIFO threshold.  The OMAP
UART IP blocks do not appear to be capable of waking the system under
an RX timeout condition.  Since the previous RX FIFO threshold was 16
bytes, this meant that omap-serial.c did not become aware of any
received data until all those bytes arrived or until another UART
interrupt occurred.  This made the serial console and presumably other
serial applications (GPS, serial Bluetooth) unusable or extremely
slow.  A 1-byte RX FIFO threshold also allows the MPU to enter a
low-power consumption state while waiting for the FIFO to fill.

This can be verified using the serial console by comparing the
behavior when "0123456789abcde" is pasted in from another window, with
the behavior when "0123456789abcdef" is pasted in.  Since the former
string is less than sixteen bytes long, the string is not echoed for
some time, while the latter string is echoed immediately.

DMA operation is unaffected by this patch.

Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for some
additional information on the standard behavior of the RX timeout
event, which was used to improve this commit description.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Govindraj Raja <govindraj.r@ti.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoReduce the number of expensive division instructions done by _parse_integer()
David Howells [Thu, 9 Feb 2012 15:48:20 +0000 (15:48 +0000)]
Reduce the number of expensive division instructions done by _parse_integer()

_parse_integer() does one or two division instructions (which are slow)
per digit parsed to perform the overflow check.

Furthermore, these are particularly expensive examples of division
instruction as the number of clock cycles required to complete them may
go up with the position of the most significant set bit in the dividend:

if (*res > div_u64(ULLONG_MAX - val, base))

which is as maximal as possible.

Worse, on 32-bit arches, more than one of these division instructions
may be required per digit.

So, assuming we don't support a base of more than 16, skip the check if the
top nibble of the result is not set at this point.

Signed-off-by: David Howells <dhowells@redhat.com>
[ Changed it to not dereference the pointer all the time - even if the
  compiler can and does optimize it away, the code just looks cleaner.
  And edited the top nybble test slightly to make the code generated on
  x86-64 better in the loop - test against a hoisted constant instead of
  shifting and testing the result ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agotty: serial: altera_uart: Add CONSOLE_POLL support
Tobias Klauser [Wed, 8 Feb 2012 13:36:09 +0000 (14:36 +0100)]
tty: serial: altera_uart: Add CONSOLE_POLL support

This allows altera_uart to be used for KGDB debugging over serial line.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotty: serial: altera_uart: remove early_altera_uart_setup
Tobias Klauser [Wed, 8 Feb 2012 13:35:46 +0000 (14:35 +0100)]
tty: serial: altera_uart: remove early_altera_uart_setup

The function has no users inside the tree and the nios2
(out-of-mainline) port doesn't use it either (anymore).

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agosysrq: Properly check for kernel threads
Anton Vorontsov [Tue, 7 Feb 2012 06:49:51 +0000 (10:49 +0400)]
sysrq: Properly check for kernel threads

There's a real possibility of killing kernel threads that might
have issued use_mm(), so kthread's mm might become non-NULL.

This patch fixes the issue by checking for PF_KTHREAD (just as
get_task_mm()).

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agosysrq: Fix possible race with exiting task
Anton Vorontsov [Tue, 7 Feb 2012 06:49:39 +0000 (10:49 +0400)]
sysrq: Fix possible race with exiting task

sysrq should grab the tasklist lock, otherwise calling force_sig() is
not safe, as it might race with exiting task, which ->sighand might be
set to NULL already.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: pch_uart: trivail cleanup by removing the pch_uart_hal_request()
Feng Tang [Mon, 6 Feb 2012 09:24:45 +0000 (17:24 +0800)]
serial: pch_uart: trivail cleanup by removing the pch_uart_hal_request()

pch_uart_hal_request() has parameters which it never uses, also
it is very short, so merge it with its caller to make code cleaner.
No functional changes at all.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: pch_uart: trivial cleanup by removing the get_msr()
Feng Tang [Mon, 6 Feb 2012 09:24:44 +0000 (17:24 +0800)]
serial: pch_uart: trivial cleanup by removing the get_msr()

The short get_msr() has some unnecessary code and only used once,
so merge it with its caller to make code cleaner. No functional
change at all.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: pch_uart: add debugfs hook for register dump
Feng Tang [Mon, 6 Feb 2012 09:24:43 +0000 (17:24 +0800)]
serial: pch_uart: add debugfs hook for register dump

This driver will be use as interfaces for multiple kinds of
devices like Bluetooth/GPS etc, this debug hook will make driver
debugging much easier.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoLinux 3.3-rc3
Linus Torvalds [Thu, 9 Feb 2012 03:21:53 +0000 (19:21 -0800)]
Linux 3.3-rc3

12 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Linus Torvalds [Thu, 9 Feb 2012 03:11:00 +0000 (19:11 -0800)]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
in the unmap function even when an error occured and the other patch
adds a workaround into the AMD IOMMU driver to better handle broken IVRS
ACPI tables (this patch fixes the case when a device is not listed in
the table but actually translated by the iommu).

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/msm: Fix error handling in msm_iommu_unmap()
  iommu/amd: Work around broken IVRS tables

12 years agoMerge branch '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab...
Linus Torvalds [Thu, 9 Feb 2012 03:09:25 +0000 (19:09 -0800)]
Merge branch '3.3-rc-fixes' of git://git./linux/kernel/git/nab/target-pending

This series contains pending target bug-fixes and cleanups for v3.3-rc3
that have been addressed the past weeks in lio-core.git.

Some of the highlights include:

 - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
 - Use IP_FREEBIND for iscsi-target to address network portal creation
   issues with systemd (dax)
 - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
 - Fix iblock se_dev_attrib.unmap_granularity (marco)
 - Fix unsupported WRITE_SAME sense payload handling (martin)
 - Add workaround for zero-length control CDB handling (nab)
 - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
 - Fix target_submit_cmd() exception handling (nab)
 - Return correct ASC for unimplemented VPD pages (roland)
 - Don't zero pages used for data buffers (roland)
 - Fix return code of core_tpg_.*_lun (sebastian)

* '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Fix unsupported WRITE_SAME sense payload
  iscsi: use IP_FREEBIND socket option
  iblock: fix handling of large requests
  target: handle empty string writes in sysfs
  iscsi_target: in_aton needs linux/inet.h
  target: Fix iblock se_dev_attrib.unmap_granularity
  target: Fix target_submit_cmd() exception handling
  target: Change target_submit_cmd() to return void
  target: accept REQUEST_SENSE with 18bytes
  target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
  target: Return correct ASC for unimplemented VPD pages
  iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
  target: Allow control CDBs with data > 1 page
  iscsi-target: Fix up a few assignments
  iscsi-target: make one-bit bitfields unsigned
  iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
  iscsi-target: Fix reject release handling in iscsit_free_cmd()
  target: fix return code of core_tpg_.*_lun
  target: use save/restore lock primitive in core_dec_lacl_count()
  target: avoid multiple outputs in scsi_dump_inquiry()
  ...

12 years agoMerge tag 'md-3.3-fixes' of git://neil.brown.name/md
Linus Torvalds [Thu, 9 Feb 2012 03:06:30 +0000 (19:06 -0800)]
Merge tag 'md-3.3-fixes' of git://neil.brown.name/md

Some simple md-related fixes.

1/ two small fixes to ensure we handle an interrupted resync properly.
2/ avoid loading the bitmap multiple times in dm-raid

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md: two small fixes to handling interrupt resync.
  Prevent DM RAID from loading bitmap twice.

12 years agoMerge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Thu, 9 Feb 2012 03:05:47 +0000 (19:05 -0800)]
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

SPI bug fixes for v3.3-rc2

Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
that merely eliminates a modpost warning, and a Kconfig change to allow
the Samsung spi driver to build on EXYNOS.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
  spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4

12 years agoMerge branch 'akpm' (Andrew's tree)
Linus Torvalds [Thu, 9 Feb 2012 03:04:47 +0000 (19:04 -0800)]
Merge branch 'akpm' (Andrew's tree)

Five fixes

* branch 'akpm':
  pcmcia: fix socket refcount decrementing on each resume
  mm: fix UP THP spin_is_locked BUGs
  drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
  mm: compaction: check for overlapping nodes during isolation for migration
  nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

12 years agopcmcia: fix socket refcount decrementing on each resume
Russell King [Thu, 9 Feb 2012 01:13:41 +0000 (17:13 -0800)]
pcmcia: fix socket refcount decrementing on each resume

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomm: fix UP THP spin_is_locked BUGs
Hugh Dickins [Thu, 9 Feb 2012 01:13:40 +0000 (17:13 -0800)]
mm: fix UP THP spin_is_locked BUGs

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>