GitHub/exynos8895/android_kernel_samsung_universal8895.git
12 years agoMerge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sat, 4 Feb 2012 18:54:26 +0000 (10:54 -0800)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  i.MX SDMA: Fix burstsize settings
  ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only
  dma: sh_dma: not all SH DMAC implementations support MEMCPY
  at_hdmac: bugfix for enabling channel irq
  dmaengine: fix missing 'cnt' in ?: in dmatest

12 years agoMerge branch 'akpm'
Linus Torvalds [Sat, 4 Feb 2012 18:51:54 +0000 (10:51 -0800)]
Merge branch 'akpm'

* akpm:
  mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration
  readahead: fix pipeline break caused by block plug
  kprobes: fix a memory leak in function pre_handler_kretprobe()
  drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
  lkdtm: avoid calling lkdtm_do_action() with spinlock held
  mm/filemap_xip.c: fix race condition in xip_file_fault()
  mm/memcontrol.c: fix warning with CONFIG_NUMA=n
  avr32: select generic atomic64_t support
  mm: postpone migrated page mapping reset
  xtensa: fix memscan()
  MAINTAINERS: update lguest F: patterns
  MAINTAINERS: remove staging sections
  MAINTAINERS: remove iMX5 section
  MAINTAINERS: update partitions block F: patterns

12 years agoMerge tag 'for-linus-3.3' of git://git.infradead.org/~dwmw2/mtd-3.3
Linus Torvalds [Sat, 4 Feb 2012 15:17:47 +0000 (07:17 -0800)]
Merge tag 'for-linus-3.3' of git://git.infradead.org/~dwmw2/mtd-3.3

 - Fix a regression in 16-bit Atmel NAND flash which was introduced in 3.1
 - Fix breakage with MTD suspend caused by the API rework
 - Fix a problem with resetting the MX28 BCH module
 - A couple of other trivial fixes

* tag 'for-linus-3.3-20120204' of git://git.infradead.org/~dwmw2/mtd-3.3:
  Revert "mtd: atmel_nand: optimize read/write buffer functions"
  mtd: fix MTD suspend
  jffs2: do not initialize variable unnecessarily
  mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23
  mtd: nand: fix typo in comment

12 years agoRevert "mtd: atmel_nand: optimize read/write buffer functions"
Artem Bityutskiy [Thu, 2 Feb 2012 11:54:25 +0000 (13:54 +0200)]
Revert "mtd: atmel_nand: optimize read/write buffer functions"

This reverts commit fb5427508abbd635e877fabdf55795488119c2d6.

The reason is that it breaks 16 bits NAND flash as it was reported by
Nikolaus Voss and confirmed by Eric BĂ©nard.

Nicolas Ferre <nicolas.ferre@atmel.com> alco confirmed:
"After double checking with designers, I must admit that I misunderstood
the way of optimizing accesses to SMC. 16 bit nand is not so common
those days..."

Reported-by: Nikolaus Voss <n.voss@weinmann.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org [3.1+]
12 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Sat, 4 Feb 2012 00:57:40 +0000 (16:57 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7314/1: kuser: consistently use usr_ret for returning from helpers
  ARM: 7302/1: Add TLB flushing for both entries in a PMD
  ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15
  ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers
  ARM: 7307/1: vfp: fix ptrace regset modification race
  ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe
  Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"

12 years agomm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during...
Mel Gorman [Fri, 3 Feb 2012 23:37:18 +0000 (15:37 -0800)]
mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration

When isolating for migration, migration starts at the start of a zone
which is not necessarily pageblock aligned.  Further, it stops isolating
when COMPACT_CLUSTER_MAX pages are isolated so migrate_pfn is generally
not aligned.  This allows isolate_migratepages() to call pfn_to_page() on
an invalid PFN which can result in a crash.  This was originally reported
against a 3.0-based kernel with the following trace in a crash dump.

PID: 9902   TASK: d47aecd0  CPU: 0   COMMAND: "memcg_process_s"
 #0 [d72d3ad0] crash_kexec at c028cfdb
 #1 [d72d3b24] oops_end at c05c5322
 #2 [d72d3b38] __bad_area_nosemaphore at c0227e60
 #3 [d72d3bec] bad_area at c0227fb6
 #4 [d72d3c00] do_page_fault at c05c72ec
 #5 [d72d3c80] error_code (via page_fault) at c05c47a4
    EAX: 00000000  EBX: 000c0000  ECX: 00000001  EDX: 00000807  EBP: 000c0000
    DS:  007b      ESI: 00000001  ES:  007b      EDI: f3000a80  GS:  6f50
    CS:  0060      EIP: c030b15a  ERR: ffffffff  EFLAGS: 00010002
 #6 [d72d3cb4] isolate_migratepages at c030b15a
 #7 [d72d3d14] zone_watermark_ok at c02d26cb
 #8 [d72d3d2c] compact_zone at c030b8de
 #9 [d72d3d68] compact_zone_order at c030bba1
#10 [d72d3db4] try_to_compact_pages at c030bc84
#11 [d72d3ddc] __alloc_pages_direct_compact at c02d61e7
#12 [d72d3e08] __alloc_pages_slowpath at c02d66c7
#13 [d72d3e78] __alloc_pages_nodemask at c02d6a97
#14 [d72d3eb8] alloc_pages_vma at c030a845
#15 [d72d3ed4] do_huge_pmd_anonymous_page at c03178eb
#16 [d72d3f00] handle_mm_fault at c02f36c6
#17 [d72d3f30] do_page_fault at c05c70ed
#18 [d72d3fb0] error_code (via page_fault) at c05c47a4
    EAX: b71ff000  EBX: 00000001  ECX: 00001600  EDX: 00000431
    DS:  007b      ESI: 08048950  ES:  007b      EDI: bfaa3788
    SS:  007b      ESP: bfaa36e0  EBP: bfaa3828  GS:  6f50
    CS:  0073      EIP: 080487c8  ERR: ffffffff  EFLAGS: 00010202

It was also reported by Herbert van den Bergh against 3.1-based kernel
with the following snippet from the console log.

BUG: unable to handle kernel paging request at 01c00008
IP: [<c0522399>] isolate_migratepages+0x119/0x390
*pdpt = 000000002f7ce001 *pde = 0000000000000000

It is expected that it also affects 3.2.x and current mainline.

The problem is that pfn_valid is only called on the first PFN being
checked and that PFN is not necessarily aligned.  Lets say we have a case
like this

H = MAX_ORDER_NR_PAGES boundary
| = pageblock boundary
m = cc->migrate_pfn
f = cc->free_pfn
o = memory hole

H------|------H------|----m-Hoooooo|ooooooH-f----|------H

The migrate_pfn is just below a memory hole and the free scanner is beyond
the hole.  When isolate_migratepages started, it scans from migrate_pfn to
migrate_pfn+pageblock_nr_pages which is now in a memory hole.  It checks
pfn_valid() on the first PFN but then scans into the hole where there are
not necessarily valid struct pages.

This patch ensures that isolate_migratepages calls pfn_valid when
necessary.

Reported-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Tested-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoreadahead: fix pipeline break caused by block plug
Shaohua Li [Fri, 3 Feb 2012 23:37:17 +0000 (15:37 -0800)]
readahead: fix pipeline break caused by block plug

Herbert Poetzl reported a performance regression since 2.6.39.  The test
is a simple dd read, but with big block size.  The reason is:

T1: ra (A, A+128k), (A+128k, A+256k)
T2: lock_page for page A, submit the 256k
T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted
because of plug and there isn't any lock_page till we hit page A+256k
because all pages from A to A+256k is in memory
T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't
submitted again.
T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is
waitting for (A+256k, A+512k) finish.

There is no request to disk in T3 and T4, so readahead pipeline breaks.

We really don't need block plug for generic_file_aio_read() for buffered
I/O.  The readahead already has plug and has fine grained control when I/O
should be submitted.  Deleting plug for buffered I/O fixes the regression.

One side effect is plug makes the request size 256k, the size is 128k
without it.  This is because default ra size is 128k and not a reason we
need plug here.

Vivek said:

: We submit some readahead IO to device request queue but because of nested
: plug, queue never gets unplugged.  When read logic reaches a page which is
: not in page cache, it waits for page to be read from the disk
: (lock_page_killable()) and that time we flush the plug list.
:
: So effectively read ahead logic is kind of broken in parts because of
: nested plugging.  Removing top level plug (generic_file_aio_read()) for
: buffered reads, will allow unplugging queue earlier for readahead.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agokprobes: fix a memory leak in function pre_handler_kretprobe()
Jiang Liu [Fri, 3 Feb 2012 23:37:16 +0000 (15:37 -0800)]
kprobes: fix a memory leak in function pre_handler_kretprobe()

In function pre_handler_kretprobe(), the allocated kretprobe_instance
object will get leaked if the entry_handler callback returns non-zero.
This may cause all the preallocated kretprobe_instance objects exhausted.

This issue can be reproduced by changing
samples/kprobes/kretprobe_example.c to probe "mutex_unlock".  And the fix
is straightforward: just put the allocated kretprobe_instance object back
onto the free_instances list.

[akpm@linux-foundation.org: use raw_spin_lock/unlock]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
Samuel Thibault [Fri, 3 Feb 2012 23:37:15 +0000 (15:37 -0800)]
drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer

KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland
with a 64bit kernel if the font width is not 8.

This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes
con_font_get return EIO in such case.

This flag should *not* be set for KDFONTOP, since it's actually the whole
point of this flag (see comment in con_font_set for instance).

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Arthur Taylor <art@ified.ca>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agolkdtm: avoid calling lkdtm_do_action() with spinlock held
Cong Wang [Fri, 3 Feb 2012 23:37:15 +0000 (15:37 -0800)]
lkdtm: avoid calling lkdtm_do_action() with spinlock held

lkdtm_do_action() may call sleeping functions like kmalloc(), so do not
call it with spin lock held.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomm/filemap_xip.c: fix race condition in xip_file_fault()
Carsten Otte [Fri, 3 Feb 2012 23:37:14 +0000 (15:37 -0800)]
mm/filemap_xip.c: fix race condition in xip_file_fault()

Fix a race condition that shows in conjunction with xip_file_fault() when
two threads of the same user process fault on the same memory page.

In this case, the race winner will install the page table entry and the
unlucky loser will cause an oops: xip_file_fault calls vm_insert_pfn (via
vm_insert_mixed) which drops out at this check:

retval = -EBUSY;
if (!pte_none(*pte))
goto out_unlock;

The resulting -EBUSY return value will trigger a BUG_ON() in
xip_file_fault.

This fix simply considers the fault as fixed in this case, because the
race winner has successfully installed the pte.

[akpm@linux-foundation.org: use conventional (and consistent) comment layout]
Reported-by: David Sadler <dsadler@us.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reported-by: Louis Alex Eisner <leisner@cs.ucsd.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomm/memcontrol.c: fix warning with CONFIG_NUMA=n
Andrew Morton [Fri, 3 Feb 2012 23:37:14 +0000 (15:37 -0800)]
mm/memcontrol.c: fix warning with CONFIG_NUMA=n

mm/memcontrol.c: In function 'memcg_check_events':
mm/memcontrol.c:779: warning: unused variable 'do_numainfo'

Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hiroyuki KAMEZAWA <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoavr32: select generic atomic64_t support
Fabio Baltieri [Fri, 3 Feb 2012 23:37:14 +0000 (15:37 -0800)]
avr32: select generic atomic64_t support

Enable use of the generic atomic64 implementation on AVR32 platforms.
Without this the kernel fails to build as the architecture does not
provide its version.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomm: postpone migrated page mapping reset
Konstantin Khlebnikov [Fri, 3 Feb 2012 23:37:13 +0000 (15:37 -0800)]
mm: postpone migrated page mapping reset

Postpone resetting page->mapping until the final remove_migration_ptes().
Otherwise the expression PageAnon(migration_entry_to_page(entry)) does not
work.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoxtensa: fix memscan()
Akinobu Mita [Fri, 3 Feb 2012 23:37:13 +0000 (15:37 -0800)]
xtensa: fix memscan()

Defining memscan() as memchr() is wrong, because the return values of
memscan() and memchr() are different when the character is not found.  So
use the generic memscan() implementation to fix this.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMAINTAINERS: update lguest F: patterns
Joe Perches [Fri, 3 Feb 2012 23:37:13 +0000 (15:37 -0800)]
MAINTAINERS: update lguest F: patterns

commit 07fe9977b623 ("lguest: move the lguest tool to the tools
directory") moved the files, update the patterns.  Sort F: patterns
alphabetically too.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMAINTAINERS: remove staging sections
Joe Perches [Fri, 3 Feb 2012 23:37:12 +0000 (15:37 -0800)]
MAINTAINERS: remove staging sections

Two commits moved files from staging to drivers/media/

commit d6ce55de3abcc ("[media] move cx25821 out of staging")
commit be30497085080 ("[media] move tm6000 to drivers/media/video")

Remove the sections.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMAINTAINERS: remove iMX5 section
Joe Perches [Fri, 3 Feb 2012 23:37:12 +0000 (15:37 -0800)]
MAINTAINERS: remove iMX5 section

commit 784a90c0a7d8f5 ("ARM i.MX: Merge i.MX5 support into mach-imx")
merged the files, remove the iMX5 section.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMAINTAINERS: update partitions block F: patterns
Joe Perches [Fri, 3 Feb 2012 23:37:11 +0000 (15:37 -0800)]
MAINTAINERS: update partitions block F: patterns

Commit 9be96f3fd101 ("move fs/partitions to block/") moved the files,
update the patterns.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas...
Linus Torvalds [Fri, 3 Feb 2012 20:41:31 +0000 (12:41 -0800)]
Merge tag 'kmemleak-fixes' of git://git./linux/kernel/git/cmarinas/linux

Trivial kmemleak bug-fixes:

 - Early logging doesn't stop when kmemleak is off by default.
 - Zero-size scanning areas should be ignored (currently it prints a
   warning).

* tag 'kmemleak-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux:
  kmemleak: Disable early logging when kmemleak is off by default
  kmemleak: Only scan non-zero-size areas

12 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 3 Feb 2012 18:06:15 +0000 (10:06 -0800)]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound

sound fixes for 3.3-rc3

Most of commits are either regression fixes for varioud HD-audio
codecs or small ASoC fixes.  Also a trivial build fix is included.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Disable dynamic-power control for VIA as default
  ALSA: hda - Allow analog low-current mode when dynamic power-control is on
  ALSA: hda - Fix the logic to detect VIA analog low-current mode
  ALSA: hda - Check power-state before changing in patch_via.c
  ALSA: HDA: Fix duplicated output to more than one codec
  ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.
  ALSA: HDA: Remove quirk for Toshiba Qosmio G50
  ALSA: HDA: Fix jack creation for codecs with front and rear Line In
  ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660
  ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine
  ALSA: Add #ifdef CONFIG_PCI guard for snd_pci_quirk_* functions
  ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer
  ALSA: HDA: Remove quirk for Asus N53Jq
  ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs
  ASoC: wm5100: Mark register cache as dirty when regulators are disabled
  ASoC: wm8962: Mark register cache as dirty when regulators are disabled
  ASoC: wm8996: Mark register cache as dirty when regulators are disabled
  ASoC: wm5100: Fix microphone configuration
  ASoC: wm5100: Make sure we switch to button reporting mode

12 years agoARM: 7314/1: kuser: consistently use usr_ret for returning from helpers
Will Deacon [Fri, 3 Feb 2012 10:08:05 +0000 (11:08 +0100)]
ARM: 7314/1: kuser: consistently use usr_ret for returning from helpers

__kuser_cmpxchg64 has a return path using bx lr to get back to the caller.
This is actually ok since the code in question is predicated on
CONFIG_CPU_32v6K, but for the sake of consistency using the usr_ret
macro is probably better.

Acked-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Thu, 2 Feb 2012 23:47:33 +0000 (15:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc->mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"

12 years agoinclude/linux/lp8727.h: Remove executable bit
Josh Triplett [Thu, 2 Feb 2012 23:29:08 +0000 (15:29 -0800)]
include/linux/lp8727.h: Remove executable bit

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agorbd: fix safety of rbd_put_client()
Alex Elder [Sun, 29 Jan 2012 19:57:43 +0000 (13:57 -0600)]
rbd: fix safety of rbd_put_client()

The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref->refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&CLIENT->kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | <-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
12 years agoFix race in process_vm_rw_core
Christopher Yeoh [Thu, 2 Feb 2012 01:04:09 +0000 (11:34 +1030)]
Fix race in process_vm_rw_core

This fixes the race in process_vm_core found by Oleg (see

  http://article.gmane.org/gmane.linux.kernel/1235667/

for details).

This has been updated since I last sent it as the creation of the new
mm_access() function did almost exactly the same thing as parts of the
previous version of this patch did.

In order to use mm_access() even when /proc isn't enabled, we move it to
kernel/fork.c where other related process mm access functions already
are.

Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agorbd: fix a memory leak in rbd_get_client()
Alex Elder [Tue, 24 Jan 2012 16:08:36 +0000 (10:08 -0600)]
rbd: fix a memory leak in rbd_get_client()

If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
12 years agoceph: create a new session lock to avoid lock inversion
Alex Elder [Fri, 13 Jan 2012 01:48:10 +0000 (17:48 -0800)]
ceph: create a new session lock to avoid lock inversion

Lockdep was reporting a possible circular lock dependency in
dentry_lease_is_valid().  That function needs to sample the
session's s_cap_gen and and s_cap_ttl fields coherently, but needs
to do so while holding a dentry lock.  The s_cap_lock field was
being used to protect the two fields, but that can't be taken while
holding a lock on a dentry within the session.

In most cases, the s_cap_gen and s_cap_ttl fields only get operated
on separately.  But in three cases they need to be updated together.
Implement a new lock to protect the spots updating both fields
atomically is required.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
12 years agoceph: fix length validation in parse_reply_info()
Xi Wang [Sun, 15 Jan 2012 03:20:59 +0000 (22:20 -0500)]
ceph: fix length validation in parse_reply_info()

"len" is read from network and thus needs validation.  Otherwise, given
a bogus "len" value, p+len could be an out-of-bounds pointer, which is
used in further parsing.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
12 years agoceph: initialize client debugfs outside of monc->mutex
Sage Weil [Sat, 14 Jan 2012 06:22:03 +0000 (22:22 -0800)]
ceph: initialize client debugfs outside of monc->mutex

Initializing debufs under monc->mutex introduces a lock dependency for
sb->s_type->i_mutex_key, which (combined with several other dependencies)
leads to an annoying lockdep warning.  There's no particular reason to do
the debugfs setup under this lock, so move it out.

It used to be the case that our first monmap could come from the OSD; that
is no longer the case with recent servers, so we will reliably set up the
client entry during the initial authentication.

We don't have to worry about racing with debugfs teardown by
ceph_debugfs_client_cleanup() because ceph_destroy_client() calls
ceph_msgr_flush() first, which will wait for the message dispatch work
to complete (and the debugfs init to complete).

Fixes: #1940
Signed-off-by: Sage Weil <sage@newdream.net>
12 years agoceph: change "ceph.layout" xattr to be "ceph.file.layout"
Alex Elder [Thu, 12 Jan 2012 01:41:01 +0000 (17:41 -0800)]
ceph: change "ceph.layout" xattr to be "ceph.file.layout"

The virtual extended attribute named "ceph.layout" is meaningful
only for regular files.  Change its name to be "ceph.file.layout" to
more directly reflect that in the ceph xattr namespace.  Preserve
the old "ceph.layout" name for the time being (until we decide it's
safe to get rid of it entirely).

Add a missing initializer for "readonly" in the terminating entry.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Thu, 2 Feb 2012 19:19:03 +0000 (11:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/blit: fix blit copy for very large buffers
  drm/radeon/kms: fix TRAVIS panel setup
  drm/radeon: fix use after free in ATRM bios reading code.
  drm/radeon/kms: Fix device tree linkage of DP i2c buses too
  drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
  drm/radeon/kms: disable output polling when suspended
  drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
  drm/nouveau/gem: fix fence_sync race / oops
  drm/nouveau: fix typo on mxmdcb option
  drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
  drm/nouveau/disp: check that panel power gpio is enabled at init time

12 years agoMerge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Thu, 2 Feb 2012 19:18:18 +0000 (11:18 -0800)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  Revert "microblaze: Add topology init"

12 years agoMerge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for...
Linus Torvalds [Thu, 2 Feb 2012 19:11:13 +0000 (11:11 -0800)]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bugs, x86: Fix printk levels for panic, softlockups and stack dumps

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix number of samples displayed
  perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
  perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
  x86/dumpstack: Remove unneeded check in dump_trace()
  perf: Fix broken interrupt rate throttling

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix ancient race in do_exit()
  sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
  sched/s390: Fix compile error in sched/core.c
  sched: Fix rq->nr_uninterruptible update race

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Remove VersaLogic Menlow reboot quirk
  x86/reboot: Skip DMI checks if reboot set by user
  x86: Properly parenthesize cmpxchg() macro arguments

12 years agoARM: 7302/1: Add TLB flushing for both entries in a PMD
Catalin Marinas [Wed, 25 Jan 2012 10:54:22 +0000 (11:54 +0100)]
ARM: 7302/1: Add TLB flushing for both entries in a PMD

Linux uses two PMD entries for a PTE with the classic page table format,
covering 2MB range. However, the __pte_free_tlb() function only adds a
single TLB flush corresponding to 1MB range covering 'addr'. On
Cortex-A15, level 1 entries can be cached by the TLB independently of
the level 2 entries and without additional flushing a PMD entry would be
left pointing at the wrong PTE. The patch limits the TLB flushing range
to two 4KB pages around the 1MB boundary within PMD.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15
Will Deacon [Wed, 25 Jan 2012 18:36:28 +0000 (19:36 +0100)]
ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15

Commit 89d6c0b5 ("perf, arch: Add generic NODE cache events") added
empty NODE event definitions for the ARM PMU implementations. This was
merged along with Cortex-A5 and Cortex-A15 PMU support, so they missed
out on the original patch.

This patch adds the empty definitions to Cortex-A5 and Cortex-A15.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers
Will Deacon [Mon, 30 Jan 2012 19:23:29 +0000 (20:23 +0100)]
ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers

If we are context switched whilst copying into a thread's
vfp_hard_struct then the partial copy may be corrupted by the VFP
context switching code (see "ARM: vfp: flush thread hwstate before
restoring context from sigframe").

This patch updates the ptrace VFP set code so that the thread state is
flushed before the copy, therefore disabling VFP and preventing
corruption from occurring.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7307/1: vfp: fix ptrace regset modification race
Dave Martin [Mon, 30 Jan 2012 19:22:28 +0000 (20:22 +0100)]
ARM: 7307/1: vfp: fix ptrace regset modification race

In a preemptible kernel, vfp_set() can be preempted, causing the
hardware VFP context to be switched while the thread vfp state is
being read and modified.  This leads to a race condition which can
cause the thread vfp state to become corrupted if lazy VFP context
save occurs due to preemption in between the time thread->vfpstate
is read and the time the modified state is written back.

This may occur if preemption occurs during the execution of a
ptrace() call which modifies the VFP register state of a thread.
Such instances should be very rare in most realistic scenarios --
none has been reported, so far as I am aware.  Only uniprocessor
systems should be affected, since VFP context save is not currently
lazy in SMP kernels.

The problem was introduced by my earlier patch migrating to use
regsets to implement ptrace.

This patch does a vfp_sync_hwstate() before reading
thread->vfpstate, to make sure that the thread's VFP state is not
live in the hardware registers while the registers are modified.

Thanks to Will Deacon for spotting this.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe
Will Deacon [Mon, 30 Jan 2012 19:21:42 +0000 (20:21 +0100)]
ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe

Following execution of a signal handler, we currently restore the VFP
context from the ucontext in the signal frame. This involves copying
from the user stack into the current thread's vfp_hard_struct and then
flushing the new data out to the hardware registers.

This is problematic when using a preemptible kernel because we could be
context switched whilst updating the vfp_hard_struct. If the current
thread has made use of VFP since the last context switch, the VFP
notifier will copy from the hardware registers into the vfp_hard_struct,
overwriting any data that had been partially copied by the signal code.

Disabling preemption across copy_from_user calls is a terrible idea, so
instead we move the VFP thread flush *before* we update the
vfp_hard_struct. Since the flushing is performed lazily, this has the
effect of disabling VFP and clearing the CPU's VFP state pointer,
therefore preventing the thread from being updated with stale data on
the next context switch.

Cc: stable <stable@vger.kernel.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoRevert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
Russell King [Sun, 29 Jan 2012 14:55:21 +0000 (14:55 +0000)]
Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"

This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3.

Joachim Eastwood reports:
| "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
| Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master
|
| Breaks booting on my custom AT91RM9200 board.
| There isn't any error messages or anything that indicates what goes
| wrong it just stops after; Uncompressing Linux... done, booting the
| kernel.
|
| Reverting it makes my board boot again.

and further debugging reveals:

ioremap: pfn=fffff phys=fffff000 offset=400 size=1000
ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000
ioremap: found: addr fef74000 => fed73000 => fed73400

Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn
0xfffff.  This happens because the changed if statement becomes:

                if (0x00200 > 0xfffff ||
                    0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1)
and therefore:
                if (0x00200 > 0xfffff ||
                    0x000003ff > 0x00203fff)

The if condition fails, and so we _believe_ that the SRAM mapping fits
our request.  Clearly that's totally bogus.

Moreover, the original premise of the 'fix' patch was wrong:
|    The condition checking boundaries of the requested and existing
|    mappings didn't take in-page offset into consideration though,
|    which lead to obscure and hard to debug problems when requested
|    mapping crossed end of the static one.

as the code immediately above this loop does:

        size = PAGE_ALIGN(offset + size);

so 'size' already contains the requested offset into the page.

So, revert the broken 'fix'.

Acked-by: Nicolas Pitre <nico@linaro.org>
12 years agodrm/radeon/kms/blit: fix blit copy for very large buffers
Ilija Hadzic [Thu, 2 Feb 2012 15:26:24 +0000 (10:26 -0500)]
drm/radeon/kms/blit: fix blit copy for very large buffers

Evergreen and NI blit copy was broken if the buffer maps to a rectangle
whose one dimension is 16384 (max dimension allowed by these chips).
In the mainline kernel, the problem is exposed only when buffers are
very large (1G), but it's still a problem. The problem could be exposed
for smaller buffers if anyone modifies the algorithm for rectangle
construction in r600_blit_create_rect() (the reason why someone would
modify that algorithm is to tune the performance of buffer moves).

The root cause was in i2f() function which only operated on range between
0 and 16383. Fix this by extending the range of i2f() function to 0 to
32767.

While at it improve the function so that the range can be easily
extended in the future (if it becomes necessary), cleanup lines
over 80 characters, and replace in-line comments with one strategic
comment that explains the crux of the function.

Credits to michel@daenzer.net for pointing out the root cause of
the bug.

v2: Fix I2F_MAX_INPUT constant definition goof and warn only once
    if input argument is out of range. Edit the comment a little
    bit to avoid some linguistic confusion and make it look better
    in general.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms: fix TRAVIS panel setup
Alex Deucher [Thu, 2 Feb 2012 15:18:00 +0000 (10:18 -0500)]
drm/radeon/kms: fix TRAVIS panel setup

Different versions of the DP to LVDS bridge chip
need different panel mode settings depending on
the chip version used.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41569

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: fix use after free in ATRM bios reading code.
Dave Airlie [Thu, 2 Feb 2012 15:25:16 +0000 (15:25 +0000)]
drm/radeon: fix use after free in ATRM bios reading code.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=45503

Reported-and-Debugged-by: mlambda@gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoALSA: hda - Disable dynamic-power control for VIA as default
Takashi Iwai [Thu, 2 Feb 2012 09:30:17 +0000 (10:30 +0100)]
ALSA: hda - Disable dynamic-power control for VIA as default

Since the dynamic pin power-control and the analog low-current mode
may lead to pop-noise, it's safer to set it off as default.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Allow analog low-current mode when dynamic power-control is on
Takashi Iwai [Wed, 1 Feb 2012 09:33:23 +0000 (10:33 +0100)]
ALSA: hda - Allow analog low-current mode when dynamic power-control is on

VIA codecs have several different power-saving features, and one of
them is the analog low-current mode.  But it turned out that the ALC
mode causes pop-noises at each on/off time on some machines.  As a
quick workaround, disable the ALC when another power-saving feature,
the dynamic pin power-control, is turned off, too, since the dynamic
power-control is already exposed as a mixer enum element so that user
can turn it on/off freely.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix the logic to detect VIA analog low-current mode
Takashi Iwai [Tue, 24 Jan 2012 12:58:36 +0000 (13:58 +0100)]
ALSA: hda - Fix the logic to detect VIA analog low-current mode

The analog low-current mode must be enabled when the no stream is
running but the current detection checks it in a wrong way.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Check power-state before changing in patch_via.c
Takashi Iwai [Tue, 24 Jan 2012 11:25:50 +0000 (12:25 +0100)]
ALSA: hda - Check power-state before changing in patch_via.c

Instead of always writing AC_VERB_SET_POWER_STATE, check the current
power-state and don't write again if the value is already set.
This may reduce the click noise upon the dynamic power-state change
(e.g. in analog-input mixer).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoi.MX SDMA: Fix burstsize settings
Philippe RĂ©tornaz [Tue, 24 Jan 2012 13:22:01 +0000 (14:22 +0100)]
i.MX SDMA: Fix burstsize settings

Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed
the mxcmmc driver but forgot to fix the SDMA driver to handle the
correct burtsize.
This make the SD card access works again with DMA on i.MX31 boards.

Signed-off-by: Philippe RĂ©tornaz <philippe.retornaz@epfl.ch>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
12 years agoMerge tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 2 Feb 2012 02:30:15 +0000 (18:30 -0800)]
Merge tag 'firewire-fixes' of git://git./linux/kernel/git/ieee1394/linux1394

firewire fixes post v3.3-rc1

Add workarounds table entries for hardware bugs in
  - FireWire part of Sound Blaster Audigy cards,
  - Ricoh PCIe 1394 controllers.
Without these, several protocols, e.g. AV/C, do not work on the
Audigy, and the Ricoh PCIe controllers wouldn't work at all.
This does not concern the older Ricoh PCI controllers.

* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: disable MSI on Ricoh controllers
  firewire: ohci: add reset packet quirk for SB Audigy

12 years agostaging: fix go7007-usb license
Randy Dunlap [Thu, 2 Feb 2012 03:04:02 +0000 (19:04 -0800)]
staging: fix go7007-usb license

Add MODULE_LICENSE() as per the license in the comment at the top of the
file for this source module to fix build warning:

  WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o
  see include/linux/module.h for more information

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodocbook: fix fatal errors in device-drivers docbook and add DMA Management section
Randy Dunlap [Thu, 2 Feb 2012 02:15:49 +0000 (18:15 -0800)]
docbook: fix fatal errors in device-drivers docbook and add DMA Management section

Fix 2 fatal errors in the device-drivers docbook.
Also add some missing files from drivers/base/; since several
of these are DMA-related, add a section for DMA Management.

docproc: drivers/base/sys.c: No such file or directory
docproc: drivers/tty/serial/8250.c: No such file or directory

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 2 Feb 2012 00:00:38 +0000 (16:00 -0800)]
Merge branch 'for-linus2' of git://git./linux/kernel/git/jmorris/linux-security

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
  lib: Fix multiple definitions of clz_tab
  lib/digsig: checks for NULL return value
  lib/mpi: added missing NULL check
  lib/mpi: added comment on divide by 0 case
  lib/mpi: check for possible zero length
  lib/digsig: pkcs_1_v1_5_decode_emsa cleanup
  lib/digsig: additional sanity checks against badly formated key payload
  lib/mpi: removed unused functions
  lib/mpi: checks for zero divisor length
  lib/mpi: return error code on dividing by zero
  lib/mpi: replaced MPI_NULL with normal NULL
  lib/mpi: added missing NULL check

12 years agolib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
David Miller [Wed, 1 Feb 2012 22:17:55 +0000 (00:17 +0200)]
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h

This copy of longlong.h is extremely dated and results in compile
errors on sparc32 when MPILIB is enabled, copy over the more uptodate
implementation from arch/sparc/math/sfp-util_32.h

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib: Fix multiple definitions of clz_tab
David Miller [Wed, 1 Feb 2012 22:17:54 +0000 (00:17 +0200)]
lib: Fix multiple definitions of clz_tab

Both sparc 32-bit's software divide assembler and MPILIB provide
clz_tab[] with identical contents.

Break it out into a seperate object file and select it when
SPARC32 or MPILIB is set.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 1 Feb 2012 23:18:39 +0000 (15:18 -0800)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

InfiniBand/RDMA fixes for 3.3:

 - Fix a crash due to a regression (uninitialized refcnt) introduced in
   3.2 with XRC support.
 - Close race in how ucma reports events when connect fails.
 - Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works.
 - Fix regression in qib caused by over-aggressive PCIe tuning.
 - Other small fixes for hardware drivers (ipath, nes, qib).

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Copyright update
  IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
  RDMA/nes: Fix fast memory registration opcode
  RDMA/nes: Fix fast memory registration length
  RDMA/ucma: Discard all events for new connections until accepted
  IB/qib: Roll back PCIe tuning change
  IB/qib: Use GFP_ATOMIC when locks are held
  RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()
  RDMA/nes: Fix for sending MPA reject frame
  IB/ipath: Calling PTR_ERR() on right variable in create_file()
  RDMA/core: Fix kernel panic by always initializing qp->usecnt

12 years agoproc: make sure mem_open() doesn't pin the target's memory
Oleg Nesterov [Tue, 31 Jan 2012 16:15:11 +0000 (17:15 +0100)]
proc: make sure mem_open() doesn't pin the target's memory

Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.

Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.

I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.

Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoproc: unify mem_read() and mem_write()
Oleg Nesterov [Tue, 31 Jan 2012 16:14:54 +0000 (17:14 +0100)]
proc: unify mem_read() and mem_write()

No functional changes, cleanup and preparation.

mem_read() and mem_write() are very similar. Move this code into the
new common helper, mem_rw(), which takes the additional "int write"
argument.

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoproc: mem_release() should check mm != NULL
Oleg Nesterov [Tue, 31 Jan 2012 16:14:38 +0000 (17:14 +0100)]
proc: mem_release() should check mm != NULL

mem_release() can hit mm == NULL, add the necessary check.

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMAINTAINERS: Greg's suse email address is dead
Greg KH [Wed, 1 Feb 2012 04:02:00 +0000 (20:02 -0800)]
MAINTAINERS: Greg's suse email address is dead

My email address has changed, the suse.de one is now dead, so update all
of my MAINTAINER entries with the correct one so that patches don't get
lost.

Also change the status of some of my entries as I'm supposed to be doing
this stuff now for real.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomtd: fix merge conflict resolution breakage
Artem Bityutskiy [Wed, 1 Feb 2012 19:10:24 +0000 (11:10 -0800)]
mtd: fix merge conflict resolution breakage

This patch fixes merge conflict resolution breakage introduced by merge
d3712b9dfcf4 ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream").

The commit changed 'mtd_can_have_bb()' function and made it always
return zero, which is incorrect.  Instead, we need it to return whether
the underlying flash device can have bad eraseblocks or not.  UBI needs
this information because it affects how it handles the underlying flash.
E.g., if the underlying flash is NOR, it cannot have bad blocks and any
write or erase error is fatal, and all we can do is to switch to R/O
mode.  We do not need to reserve a pool of good eraseblocks for bad
eraseblocks handling, and so on.

This patch also removes 'mtd_can_have_bb()' invocations from Logfs to
ensure correct Logfs behavior.

I've tested that with this patch UBI works on top of NOR and NAND
flashes emulated by mtdram and nandsim correspondingly.

This patch is based on patch from Linus Torvalds.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Jörn Engel <joern@logfs.org>
Acked-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only
Guennadi Liakhovetski [Wed, 18 Jan 2012 09:14:29 +0000 (10:14 +0100)]
ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
12 years agodma: sh_dma: not all SH DMAC implementations support MEMCPY
Guennadi Liakhovetski [Wed, 18 Jan 2012 09:14:25 +0000 (10:14 +0100)]
dma: sh_dma: not all SH DMAC implementations support MEMCPY

Add a flag to allow platforms to specify, whether a DMAC instance supports
the MEMCPY operation. To avoid regressions, preserve the current default.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
12 years agodrm/radeon/kms: Fix device tree linkage of DP i2c buses too
Jean Delvare [Tue, 31 Jan 2012 08:55:21 +0000 (09:55 +0100)]
drm/radeon/kms: Fix device tree linkage of DP i2c buses too

Properly set the parent device of DP i2c buses before registering them
too.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
Michel Dänzer [Wed, 1 Feb 2012 11:09:55 +0000 (12:09 +0100)]
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.

The value of this register is transferred to the V_COUNTER register at the
beginning of vertical blank. V_COUNTER is the reference for VLINE waits and
goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout,
so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the
beginning of vertical blank, and VLINE waits excluding the whole scanout area
could never finish (possibly only if VIEWPORT_Y_START is larger than the length
of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer
height should prevent this for any kind of VLINE wait.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 .

CC: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms: disable output polling when suspended
Seth Forshee [Wed, 1 Feb 2012 01:06:25 +0000 (19:06 -0600)]
drm/radeon/kms: disable output polling when suspended

Polling the outputs when the device is suspended can result in erroneous
status updates. Disable output polling during suspend to prevent this
from happening.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agolib/digsig: checks for NULL return value
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:24 +0000 (19:13 +0200)]
lib/digsig: checks for NULL return value

mpi_read_from_buffer() return value must not be NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: added missing NULL check
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:18 +0000 (19:13 +0200)]
lib/mpi: added missing NULL check

Added missing NULL check after mpi_alloc_limb_space().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: added comment on divide by 0 case
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:20 +0000 (19:13 +0200)]
lib/mpi: added comment on divide by 0 case

Comment explains that existing clients do not call this function
with dsize == 0, which means that 1/0 should not happen.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: check for possible zero length
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:19 +0000 (19:13 +0200)]
lib/mpi: check for possible zero length

Buggy client might pass zero nlimbs which is meaningless.
Added check for zero length.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/digsig: pkcs_1_v1_5_decode_emsa cleanup
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:26 +0000 (19:13 +0200)]
lib/digsig: pkcs_1_v1_5_decode_emsa cleanup

Removed useless 'is_valid' variable in pkcs_1_v1_5_decode_emsa(),
which was inhereted from original code. Client now uses return value
to check for an error.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/digsig: additional sanity checks against badly formated key payload
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:25 +0000 (19:13 +0200)]
lib/digsig: additional sanity checks against badly formated key payload

Added sanity checks for possible wrongly formatted key payload data:
- minimum key payload size
- zero modulus length
- corrected upper key payload boundary.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: removed unused functions
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:23 +0000 (19:13 +0200)]
lib/mpi: removed unused functions

do_encode_md() and mpi_get_keyid() are not parts of mpi library.
They were used early versions of gnupg and in digsig project,
but they are not used neither here nor there anymore.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: checks for zero divisor length
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:22 +0000 (19:13 +0200)]
lib/mpi: checks for zero divisor length

Divisor length should not be 0.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: return error code on dividing by zero
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:21 +0000 (19:13 +0200)]
lib/mpi: return error code on dividing by zero

Definitely better to return error code than to divide by zero.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: replaced MPI_NULL with normal NULL
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:16 +0000 (19:13 +0200)]
lib/mpi: replaced MPI_NULL with normal NULL

MPI_NULL is replaced with normal NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agolib/mpi: added missing NULL check
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:17 +0000 (19:13 +0200)]
lib/mpi: added missing NULL check

Added missing NULL check after mpi_alloc().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
12 years agoALSA: HDA: Fix duplicated output to more than one codec
David Henningsson [Wed, 1 Feb 2012 11:05:41 +0000 (12:05 +0100)]
ALSA: HDA: Fix duplicated output to more than one codec

This typo caused the wrong codec's nid to be checked for wcaps type.
As a result, sometimes speakers would duplicate the output sent to
HDMI output.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/924320
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux...
Dave Airlie [Wed, 1 Feb 2012 09:36:24 +0000 (09:36 +0000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
  drm/nouveau/gem: fix fence_sync race / oops
  drm/nouveau: fix typo on mxmdcb option
  drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
  drm/nouveau/disp: check that panel power gpio is enabled at init time

12 years agoALSA: hda - Fix calling cs_automic twice for Cirrus codecs.
Dylan Reid [Tue, 31 Jan 2012 21:04:41 +0000 (13:04 -0800)]
ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.

If cs_automic is called twice (like it is during init) while the mic
is present, it will over-write the last_input with the new one,
causing it to switch back to the automic input when the mic is
unplugged. This leaves the driver in a state (cur_input, last_input,
and automix_idx the same) where the internal mic can not be selected
until it is rebooted without the mic attached.

Check that the mic hasn't already been switched to before setting
last_input.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agodrm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
Dan Carpenter [Wed, 4 Jan 2012 07:20:47 +0000 (10:20 +0300)]
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()

calc_mclk() returns zero on success and negative on failure but clk is
a u32.

v2: Martin Peres:
- clk should be an int, not a u32

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
12 years agodrm/nouveau/gem: fix fence_sync race / oops
Ben Skeggs [Tue, 10 Jan 2012 00:18:28 +0000 (10:18 +1000)]
drm/nouveau/gem: fix fence_sync race / oops

Due to a race it was possible for a fence to be destroyed while another
thread was trying to synchronise with it.  If this happened in the fallback
non-semaphore path, it lead to the following oops due to fence->channel
being NULL.

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau]
*pde = a649c067
SMP
Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi]

Pid: 2255, comm: gnome-shell Tainted: G           O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM
EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1
EIP is at nouveau_fence_update+0xe/0xe0 [nouveau]
EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000
ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000)
Stack:
 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f
 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0
 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000
Call Trace:
 [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau]
 [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau]
 [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau]
 [<fa964046>] validate_list+0x176/0x300 [nouveau]
 [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm]
 [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau]
 [<c0406481>] ? die+0x31/0x80
 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm]
 [<c0406481>] ? die+0x31/0x80
 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau]
 [<c0635c7b>] ? file_has_perm+0xcb/0xe0
 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm]
 [<c0564f56>] do_vfs_ioctl+0x86/0x5b0
 [<c0406481>] ? die+0x31/0x80
 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130
 [<c0554f30>] ? fget_light+0x30/0x340
 [<c05654ef>] sys_ioctl+0x6f/0x80
 [<c099e3a4>] syscall_call+0x7/0xb
 [<c0406481>] ? die+0x31/0x80
 [<c0406481>] ? die+0x31/0x80

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
12 years agodrm/nouveau: fix typo on mxmdcb option
Ben Skeggs [Sat, 7 Jan 2012 06:48:52 +0000 (16:48 +1000)]
drm/nouveau: fix typo on mxmdcb option

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
12 years agodrm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
Ben Skeggs [Wed, 1 Feb 2012 05:08:59 +0000 (15:08 +1000)]
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS

There's at least one known case where our shadowing code is buggy, and we
fail init.  Until we can be confident we're doing all this correctly, lets
succeed and risk crazy bios tables rather than failing for perfectly valid
configs too.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
12 years agodrm/nouveau/disp: check that panel power gpio is enabled at init time
Ben Skeggs [Mon, 30 Jan 2012 23:16:59 +0000 (09:16 +1000)]
drm/nouveau/disp: check that panel power gpio is enabled at init time

Reported-by: Yuriy Khomchik <homyur@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
12 years agoLinux 3.3-rc2
Linus Torvalds [Tue, 31 Jan 2012 21:31:54 +0000 (13:31 -0800)]
Linux 3.3-rc2

12 years agoMerge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
Linus Torvalds [Tue, 31 Jan 2012 17:23:59 +0000 (09:23 -0800)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream

There are few important bug fixes for LogFS

* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
  Logfs: Allow NULL block_isbad() methods
  logfs: Grow inode in delete path
  logfs: Free areas before calling generic_shutdown_super()
  logfs: remove useless BUG_ON
  MAINTAINERS: Add Prasad Joshi in LogFS maintiners
  logfs: Propagate page parameter to __logfs_write_inode
  logfs: set superblock shutdown flag after generic sb shutdown
  logfs: take write mutex lock during fsync and sync
  logfs: Prevent memory corruption
  logfs: update page reference count for pined pages

Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what
"mtd->block_isbad" means in commit f2933e86ad93: "Logfs: Allow NULL
block_isbad() methods" clashing with the abstraction changes in the
commits 7086c19d0742: "mtd: introduce mtd_block_isbad interface" and
d58b27ed58a3: "logfs: do not use 'mtd->block_isbad' directly".

This resolution takes the semantics from commit f2933e86ad93, and just
makes mtd_block_isbad() return zero (false) if the 'block_isbad'
function is NULL.  But that also means that now "mtd_can_have_bb()"
always returns 0.

Now, "mtd_block_markbad()" will obviously return an error if the
low-level driver doesn't support bad blocks, so this is somewhat
non-symmetric, but it actually makes sense if a NULL "block_isbad"
function is considered to mean "I assume that all my blocks are always
good".

12 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 31 Jan 2012 14:13:14 +0000 (15:13 +0100)]
Merge branch 'fix/asoc' into for-linus

12 years agoALSA: HDA: Remove quirk for Toshiba Qosmio G50
David Henningsson [Tue, 31 Jan 2012 09:31:49 +0000 (10:31 +0100)]
ALSA: HDA: Remove quirk for Toshiba Qosmio G50

The user reports that model=auto works better than current handling
on a 3.2 based kernel (with jack detection patches backported).
Since model=auto is what we prefer these days anyway, the quirk
should be removed.

Alsa-info for the relevant machine:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp

BugLink: https://bugs.launchpad.net/bugs/923316
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: HDA: Fix jack creation for codecs with front and rear Line In
David Henningsson [Tue, 31 Jan 2012 08:04:15 +0000 (09:04 +0100)]
ALSA: HDA: Fix jack creation for codecs with front and rear Line In

If a codec has both a front and a rear Line In, two controls both
named "Line Jack" will be created, which causes parsing to fail.
While a long term solution might be to name the jacks differently,
this extra check is consistent with what is already being done in many
auto-parsers, and will also protect against other cases when two
inputs have the same label.

BugLink: https://bugs.launchpad.net/bugs/923409
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 31 Jan 2012 12:01:58 +0000 (13:01 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Fixes cherry picked from perf/core.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
12 years agoRevert "microblaze: Add topology init"
Michal Simek [Mon, 30 Jan 2012 09:53:08 +0000 (10:53 +0100)]
Revert "microblaze: Add topology init"

This reverts commit d761f0c521868e59cd0bc59159cbdb4686fe210d.

Patch: "cpu: Register a generic CPU device on architectures that currently do not"
(sha1: 9f13a1fd452f11c18004ba2422a6384b424ec8a9)

selects GENERIC_CPU_DEVICES for Microblaze which register cpu.
My patch was done in the same time that's why cpu was registered twice which
caused this warning log:

------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc()
sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0'
Modules linked in:
...

Signed-off-by: Michal Simek <monstr@monstr.eu>
12 years agoMerge branch fixes of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine.git
Vinod Koul [Tue, 31 Jan 2012 08:04:15 +0000 (13:34 +0530)]
Merge branch fixes of git://git./linux/kernel/git/djbw/dmaengine.git

12 years agoat_hdmac: bugfix for enabling channel irq
Nikolaus Voss [Tue, 17 Jan 2012 09:28:33 +0000 (10:28 +0100)]
at_hdmac: bugfix for enabling channel irq

commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant
chan_id and chancnt initialization in dma drivers as this is done
in dma_async_device_register().

However, atc_enable_irq() relied on chan_id set before registering
the device, what left only channel 0 functional for this driver.

This patch introduces atc_enable/disable_chan_irq() as a variant
of atc_enable/disable_irq() with the channel as explicit argument.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
12 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 31 Jan 2012 01:08:40 +0000 (17:08 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
  hwmon: (sht15) fix bad error code
  MAINTAINERS: Drop maintainer for MAX1668 hwmon driver
  MAINTAINERS: Add hwmon entries for Wolfson
  hwmon: (f71805f) Fix clamping of temperature limits

12 years agoMerge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Tue, 31 Jan 2012 01:06:26 +0000 (17:06 -0800)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-pinctrl

Here are some fixes to the pin control system that has accumulated since
-rc1.  Mainly Tony Lindgren fixed the module load/unload logic and the
rest are minor fixes and documentation.

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: add checks for empty function names
  pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set
  pinctrl: fix some pinmux typos
  pinctrl: free debugfs entries when unloading a pinmux driver
  pinctrl: unbreak error messages
  Documentation/pinctrl: fix a few syntax errors in code examples
  pinctrl: fix pinconf_pins_show iteration

12 years agoperf top: Fix number of samples displayed
Stephane Eranian [Mon, 30 Jan 2012 10:50:37 +0000 (11:50 +0100)]
perf top: Fix number of samples displayed

In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.

The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.

This patch fixes this.

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf tools: Fix strlen() bug in perf_event__synthesize_event_type()
Stephane Eranian [Fri, 20 Jan 2012 09:49:12 +0000 (10:49 +0100)]
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()

The event_type record has a max length for the event name.

It's called MAX_EVENT_NAME.

The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoperf tools: Fix broken build by defining _GNU_SOURCE in Makefile
David Daney [Tue, 17 Jan 2012 21:41:01 +0000 (13:41 -0800)]
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile

When building on my Debian/mips system, util/util.c fails to build
because commit 1aed2671738785e8f5aea663a6fda91aa7ef59b5 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done.  This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.

There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.

The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files.  All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.

All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.

This gives me a clean build on x86_64 (fc12) and mips (Debian).

Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
12 years agoMerge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-next
Roland Dreier [Tue, 31 Jan 2012 00:18:21 +0000 (16:18 -0800)]
Merge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-next

12 years agoRDMA/nes: Copyright update
Tatyana Nikolova [Mon, 28 Nov 2011 20:22:29 +0000 (14:22 -0600)]
RDMA/nes: Copyright update

Update copyright information in the source files.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>