Viresh Kumar [Tue, 21 Jul 2015 02:31:14 +0000 (08:01 +0530)]
clocksource/drivers/sh_tmu: Fix traceback spotted in -next
Traceback in -next due to commit 'clockevents/drivers/sh_tmu: Migrate to new
'set-state' interface'.
Commit ("clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface")
in -next causes the following traceback. This is seen with qemu runs for the sh
target.
------------[ cut here ]------------
WARNING: at drivers/clocksource/sh_tmu.c:202
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc3-next-
20150720 #1
task:
8c411ed8 ti:
8c40e000 task.ti:
8c40e000
PC is at sh_tmu_disable+0x40/0x60
PR is at sh_tmu_clock_event_shutdown+0x8/0x20
PC :
8c271220 SP :
8c40ff10 SR :
400081f1 TEA :
00000000
R0 :
8c271240 R1 :
8fc08cfc R2 :
00000000 R3 :
3fffffff
R4 :
8fc08c00 R5 :
00000001 R6 :
00000002 R7 :
ffffffff
R8 :
00000001 R9 :
8fc08c20 R10 :
00000000 R11 :
00000000
R12 :
8c012820 R13 :
00000000 R14 :
00000000
MACH:
3b9ac9ff MACL:
80000000 GBR :
00000000 PR :
8c271248
Call trace:
[<
8c065836>] clockevents_switch_state+0x16/0x60
[<
8c06588c>] clockevents_shutdown+0xc/0x40
[<
8c066330>] tick_check_new_device+0x90/0xc0
[<
8c065556>] clockevents_register_device+0x56/0x120
[<
8c0662a0>] tick_check_new_device+0x0/0xc0
[<
8c27167a>] sh_tmu_probe+0x29a/0x4e0
[<
8c18a994>] kasprintf+0x14/0x20
[<
8c442782>] early_platform_driver_probe+0x20e/0x2bc
[<
8c1fade0>] platform_match+0x0/0x100
[<
8c33babc>] printk+0x0/0x24
[<
8c434892>] start_kernel+0x32e/0x574
[<
8c33babc>] printk+0x0/0x24
[<
8c17d320>] strlen+0x0/0x58
[<
8c43430c>] unknown_bootoption+0x0/0x1e0
[<
8c011024>] _stext+0x24/0x30
---[ end trace
cb88537fdc8fa200 ]---
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Daniel Lezcano [Tue, 4 Aug 2015 09:59:42 +0000 (11:59 +0200)]
clockevents/drivers/timer-atmel-pit: Fix typo in structure initialization
Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Mon, 6 Jul 2015 10:09:19 +0000 (15:39 +0530)]
clockevents/drivers/timer-sp804: Migrate to new 'set-state' interface
Migrate timer-sp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
There are few more changes worth noticing:
- The clockevent device was disabled by writing: 'TIMER_CTRL_32BIT |
TIMER_CTRL_IE' to ctrl register earlier. i.e. by un-setting the
TIMER_CTRL_ENABLE bit. Its done by writing zero now and should have
the same effect.
- For shutdown and resume we were writing the same value twice to the
register (to disable the timer), which is fixed now.
- Switching to oneshot mode was divided into two parts earlier:
- Firstly set_mode() was writing:
'TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ONESHOT'
to ctrl register (device not enabled yet)
- Then sp804_set_next_event() was enabling the device by writing
'readl(ctrl) | TIMER_CTRL_ENABLE' to the ctrl register. This was
unnecessarily complicated.
- Change this to: Stop device on set_state_oneshot and configure it in
sp804_set_next_event().
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Mon, 6 Jul 2015 10:09:18 +0000 (15:39 +0530)]
clockevents/drivers/timer-imx-gpt: Migrate to new 'set-state' interface
Migrate timer-imx-gpt driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also drop:
- 'imx_timer.cem': It was caching the last state of the clockevent
device. The same behavior can be achieved by using clockevents state
helpers. These helpers are only required for oneshot mode as
shutdown/resume wouldn't be done twice by the core.
- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
by drivers. The prints are modified to print the set-state functions
name now to debug the driver.
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Geert Uytterhoeven [Tue, 14 Jul 2015 12:00:47 +0000 (14:00 +0200)]
clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48 platform_device_id entry
Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), all former users of the "sh-cmt-48-gen2" platform device name are
only supported in generic DT-only ARM multi-platform builds. The driver
doesn't need to match platform devices by name anymore, hence remove the
corresponding platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Jisheng Zhang [Sat, 4 Jul 2015 05:06:43 +0000 (13:06 +0800)]
clockevents/drivers/dw_apb_timer: Add dynamic irq flag to the timer
Commit
d2348fb6fdc6 ("tick: Dynamically set broadcast irq affinity")
adds one excellent feature CLOCK_EVT_FEAT_DYNIRQ to let the core set the
interrupt affinity of the broadcast interrupt to the cpu which has the
earliest expiry time. This patch adds CLOCK_EVT_FEAT_DYNIRQ flag to
avoid unnecessary wakeups and IPIs when the dw_apb_timer is used as
broadcast timer.
A simple test:
~ # rm /tmp/test.sh
~ # cat > /tmp/test.sh
cat /proc/interrupts
for i in `seq 10` ; do sleep $i; done
cat /proc/interrupts
~ # chmod +x /tmp/test.sh
~ # taskset 0x2 /tmp/test.sh
without the patch:
CPU0 CPU1
27: 115 36 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 88 0 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4
f7e81400.i2c
228: 0 0 interrupt-controller 5
f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21
f7e84000.i2c
231: 0 0 interrupt-controller 20
f7e84800.i2c
265: 445 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 0 11 Timer broadcast interrupts
IPI2: 56 104 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 25 27 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
CPU0 CPU1
27: 115 38 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 160 0 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4
f7e81400.i2c
228: 0 0 interrupt-controller 5
f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21
f7e84000.i2c
231: 0 0 interrupt-controller 20
f7e84800.i2c
265: 514 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 0 83 Timer broadcast interrupts
IPI2: 56 104 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 25 46 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
cpu0 get 160-88=72 timer interrupts, CPU1 got 83-11=72 broadcast timer
IPIs
So, overall system got 72+72=144 wake ups and 72 broadcast timer IPIs
With the patch:
CPU0 CPU1
27: 107 37 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 66 7 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4
f7e81400.i2c
228: 0 0 interrupt-controller 5
f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21
f7e84000.i2c
231: 0 0 interrupt-controller 20
f7e84800.i2c
265: 311 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 2 4 Timer broadcast interrupts
IPI2: 58 100 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 21 24 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
CPU0 CPU1
27: 107 39 GIC 27 arch_timer
45: 62 0 GIC 45 mmc0
160: 69 75 interrupt-controller 8 timer
227: 0 0 interrupt-controller 4
f7e81400.i2c
228: 0 0 interrupt-controller 5
f7e81800.i2c
229: 0 0 interrupt-controller 7 dw_spi65535
230: 0 0 interrupt-controller 21
f7e84000.i2c
231: 0 0 interrupt-controller 20
f7e84800.i2c
265: 380 0 interrupt-controller 8 serial
IPI0: 0 0 CPU wakeup interrupts
IPI1: 3 6 Timer broadcast interrupts
IPI2: 60 100 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 0 4 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 21 45 IRQ work interrupts
IPI7: 0 0 completion interrupts
IPI8: 0 0 CPU backtrace
Err: 0
cpu0 got 69-66=3, cpu1 got 75-7=68 timer interrupts. cpu0 got 3-2=1
broadcast timer IPIs, cpu1 got 6-4=2 broadcast timer IPIs.
So, overall system got 3+68+1+2=74 wakeups and 1+2=3 broadcast timer
IPIs
This patch removes 50% wakeups and almost 100% broadcast timer IPIs!
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:20 +0000 (16:24 +0530)]
clockevents/drivers/exynos_mct: Migrate to new 'set-state' interface
Migrate exynos_mct driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:38 +0000 (16:24 +0530)]
clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface
Migrate tcb_clksrc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:55 +0000 (16:24 +0530)]
clockevents/drivers/zevio: Migrate to new 'set-state' interface
Migrate zevio driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:54 +0000 (16:24 +0530)]
clockevents/drivers/vt8500: Migrate to new 'set-state' interface
Migrate vt8500 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:53 +0000 (16:24 +0530)]
clockevents/drivers/vf_pit: Migrate to new 'set-state' interface
Migrate vf_pit driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jingchang Lu <b35083@freescale.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Viresh Kumar [Thu, 18 Jun 2015 10:54:52 +0000 (16:24 +0530)]
clockevents/drivers/u300: Migrate to new 'set-state' interface
Migrate u300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:51 +0000 (16:24 +0530)]
clockevents/drivers/sun5i: Migrate to new 'set-state' interface
Migrate sun5i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:50 +0000 (16:24 +0530)]
clockevents/drivers/stm32: Migrate to new 'set-state' interface
Migrate stm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:49 +0000 (16:24 +0530)]
clockevents/drivers/prima2: Migrate to new 'set-state' interface
Migrate prima2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:48 +0000 (16:24 +0530)]
clockevents/drivers/keystone: Migrate to new 'set-state' interface
Migrate keystone driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also pass the mode-mask to keystone_timer_config() instead of the mode
as mode macro's aren't valid anymore.
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:47 +0000 (16:24 +0530)]
clockevents/drivers/integrator: Migrate to new 'set-state' interface
Migrate integrator driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
For oneshot mode the clkevt device was first getting disabled by
clearing TIMER_CTRL_ENABLE bits in TIMER_CTRL register, followed by
clearing TIMER_CTRL_PERIODIC bit. Both these are done with a single
write operation now.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:46 +0000 (16:24 +0530)]
clockevents/drivers/digicolor: Migrate to new 'set-state' interface
Migrate digicolor driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Viresh Kumar [Thu, 18 Jun 2015 10:54:45 +0000 (16:24 +0530)]
clockevents/drivers/atmel-st: Migrate to new 'set-state' interface
Migrate atmel-st driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:44 +0000 (16:24 +0530)]
clockevents/drivers/atmel: Migrate to new 'set-state' interface
Migrate atmel driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:43 +0000 (16:24 +0530)]
clockevents/drivers/atlas7: Migrate to new 'set-state' interface
Migrate atlas7 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:42 +0000 (16:24 +0530)]
clockevents/drivers/orion: Migrate to new 'set-state' interface
Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:41 +0000 (16:24 +0530)]
clockevents/drivers/efm32: Migrate to new 'set-state' interface
Migrate efm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
There is nothing to be done for resume state and so isn't implemented.
Cc: Uwe Kleine-König <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:40 +0000 (16:24 +0530)]
clockevents/drivers/time-armada-370-xp: Migrate to new 'set-state' interface
Migrate time-armada-370-xp driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 3 Jul 2015 08:54:35 +0000 (14:24 +0530)]
clockevents/drivers/tegra20: Migrate to new 'set-state' interface
Migrate tegra20 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Thierry Reding <treding@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:37 +0000 (16:24 +0530)]
clockevents/drivers/sun4i: Migrate to new 'set-state' interface
Migrate sun4i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:36 +0000 (16:24 +0530)]
clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface
Migrate sh_tmu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:35 +0000 (16:24 +0530)]
clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface
Migrate sh_mtu2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:34 +0000 (16:24 +0530)]
clockevents/drivers/sh_cmt: Migrate to new 'set-state' interface
Migrate sh_cmt driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Viresh Kumar [Thu, 18 Jun 2015 10:54:33 +0000 (16:24 +0530)]
clockevents/drivers/samsung_pwm: Migrate to new 'set-state' interface
Migrate samsung_pwm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:32 +0000 (16:24 +0530)]
clockevents/drivers/rockchip: Migrate to new 'set-state' interface
Migrate rockchip driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything for oneshot or resume modes, and so the
callbacks aren't provided.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:31 +0000 (16:24 +0530)]
clockevents/drivers/qcom: Migrate to new 'set-state' interface
Migrate qcom driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Periodic mode isn't supported by the driver and so the callback isn't
provided anymore.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:30 +0000 (16:24 +0530)]
clockevents/drivers/pxa: Migrate to new 'set-state' interface
Migrate pxa driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Both oneshot and shutdown modes had exactly same code and so only a
single callback is sufficient now, which will be called for both the
modes.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Viresh Kumar [Thu, 18 Jun 2015 10:54:29 +0000 (16:24 +0530)]
clockevents/drivers/nomadik-mtu: Migrate to new 'set-state' interface
Migrate nomadik-mtu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:28 +0000 (16:24 +0530)]
clockevents/drivers/mxs: Migrate to new 'set-state' interface
Migrate mxs driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also drop:
- 'mxs_clockevent_mode': as we have helpers available from core for the
same.
same state twice and so perhaps the check wasn't required.
- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
by drivers and it was used just to print old-state:new-state. The
debug prints are called from mxs_irq_clear() now based on the
state-name passed to it. The printed name will be same for shutdown
and resume states as they use the same callback pointer.
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:27 +0000 (16:24 +0530)]
clockevents/drivers/mtk: Migrate to new 'set-state' interface
Migrate mtk driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:26 +0000 (16:24 +0530)]
clockevents/drivers/moxart: Migrate to new 'set-state' interface
Migrate moxart driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:25 +0000 (16:24 +0530)]
clockevents/drivers/mips-gic: Migrate to new 'set-state' interface
Migrate mips-gic driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:24 +0000 (16:24 +0530)]
clockevents/drivers/metag_generic: Migrate to new 'set-state' interface
Migrate metag_generic driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. Even the WARN()
for periodic or unused modes isn't required anymore as the core is
taking care of that now. So, this patch doesn't provide any set-state
callbacks.
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:23 +0000 (16:24 +0530)]
clockevents/drivers/meson6: Migrate to new 'set-state' interface
Migrate meson6 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Carlo Caione <carlo@caione.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:22 +0000 (16:24 +0530)]
clockevents/drivers/i8253: Migrate to new 'set-state' interface
Migrate i8253 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:21 +0000 (16:24 +0530)]
clockevents/drivers/fsl_ftm: Migrate to new 'set-state' interface
Migrate fsl_ftm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:19 +0000 (16:24 +0530)]
clockevents/drivers/dw_apb: Migrate to new 'set-state' interface
Migrate dw_apb driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:18 +0000 (16:24 +0530)]
clockevents/drivers/dummy_timer: Migrate to new 'set-state' interface
Migrate dummy_timer driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumae <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:17 +0000 (16:24 +0530)]
clockevents/drivers/clps711x: Migrate to new 'set-state' interface
Migrate clps711x driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Thu, 18 Jun 2015 10:54:16 +0000 (16:24 +0530)]
clockevents/drivers/cadence_ttc: Migrate to new 'set-state' interface
Migrate cadence_ttc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Viresh Kumar [Tue, 30 Jun 2015 09:00:48 +0000 (14:30 +0530)]
clockevents/drivers/asm9260: Migrate to new 'set-state' interface
Migrate asm9260 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
As a default the timer was stopped when entering in the set_mode(RESUME)
function, now this is done explicitly with the new API.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Geert Uytterhoeven [Tue, 23 Jun 2015 12:56:29 +0000 (14:56 +0200)]
clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48-gen2 platform_device_id entry
Since commit
914d7d148411997c ("ARM: shmobile: r8a73a4: Remove legacy
code"), all former users of the "sh-cmt-48-gen2" platform device name
are only supported in generic DT-only ARM multi-platform builds. The
driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Tue, 23 Jun 2015 12:56:28 +0000 (14:56 +0200)]
clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-32-fast platform_device_id entry
Since commit
59b89af1d5551c12 ("ARM: shmobile: sh7372: Remove Legacy C
SoC code"), there are no more users left of the "sh-cmt-32-fast"
platform device name. Hence remove the corresponding platform_device_id
entry from the driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Alexey Klimov [Sun, 21 Jun 2015 20:41:39 +0000 (23:41 +0300)]
clockevents/drivers/exynos_mct: Remove unneeded container_of()
Patch removes unneeded container_of() macro in exynos4_local_timer_setup().
Instead let's pass mevt pointer to setup and stop functions from
exynos4_mct_cpu_notify() and let them get evt pointer.
Tested on odroid-xu3.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Antonio Borneo [Wed, 17 Jun 2015 11:42:30 +0000 (19:42 +0800)]
clockevents/drivers/Kconfig: Replace USE_OF with OF
USE_OF is used as intermediate Kconfig option by few arch's (ARM, MIPS,
Xtensa); in all these cases it implies setting option OF too. Replace the
only instance of USE_OF in clocksource with OF.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:17 +0000 (13:30 +0530)]
clockevents/drivers/em_sti: Migrate to new 'set-state' interface
Migrate em_sti driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
NOTE: This also drops a special check:
if (old_mode == CLOCK_EVT_MODE_ONESHOT)
em_sti_stop(p, USER_CLOCKEVENT);
as it doesn't look like that important. This driver only supports
ONESHOT and we can only move only to SHUTDOWN from ONESHOT and.
Also on second call (on shutdown), em_sti_stop() would return without
disabling the device again.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:16 +0000 (13:30 +0530)]
clockevents/drivers/cs5535: Migrate to new 'set-state' interface
Migrate cs5535 driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:15 +0000 (13:30 +0530)]
clockevents/drivers/bcm_kona: Migrate to new 'set-state' interface
Migrate bcm_kona driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Oneshot callback isn't required as it was empty.
Acked-by: Ray Jui <rjui@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:14 +0000 (13:30 +0530)]
clockevents/drivers/bcm2835: Migrate to new 'set-state' interface
Migrate bcm2835 driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:13 +0000 (13:30 +0530)]
clockevents/drivers/arm_global_timer: Migrate to new 'set-state' interface
Migrate arm_global_timer driver to the new 'set-state' interface
provided by the clockevents core, the earlier 'set-mode' interface is
marked obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Viresh Kumar [Fri, 12 Jun 2015 08:00:12 +0000 (13:30 +0530)]
clockevents/drivers/arm_arch_timer: Migrate to new 'set-state' interface
Migrate arm_arch_timer driver to the new 'set-state' interface provided
by the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Luiz Capitulino [Wed, 29 Jul 2015 19:14:17 +0000 (15:14 -0400)]
clockevents: Drop redundant cpumask check in tick_check_new_device()
The same check is performed by tick_check_percpu().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Link: http://lkml.kernel.org/r/20150729151417.069d1bb0@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 13 Apr 2015 21:02:25 +0000 (21:02 +0000)]
staging: ozwpan: Fix hrtimer wreckage
oz_timer_add() modifies the expiry value of an active timer, which
results in data corruption.
Use hrtimer_start() and remove the silly conditional.
While at it use the proper helper function to convert milliseconds to
ktime.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shigekatsu Tateno <shigekatsu.tateno@atmel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Link: http://lkml.kernel.org/r/20150413210035.357448657@linutronix.de
Stephen Boyd [Wed, 15 Jul 2015 18:21:40 +0000 (11:21 -0700)]
clockevents: Remove clockevents_notify() prototype
This function no longer exists after commit
a49b116dcb12
(clockevents: Cleanup dead cpu explicitely, 2015-04-03). Remove
the prototype and the stub function.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: trivial@kernel.org
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: http://lkml.kernel.org/r/1436984500-5425-1-git-send-email-sboyd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Sun, 19 Jul 2015 21:45:02 +0000 (14:45 -0700)]
Linux 4.2-rc3
Linus Torvalds [Sun, 19 Jul 2015 21:18:00 +0000 (14:18 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly simple fixes: one is a change that causes us to have a very
low queue depth leading to performance issues and the other is a null
deref occasionally in tapes thanks to use after put"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fix host max depth checking for the 'queue_depth' sysfs interface
st: null pointer dereference panic caused by use after kref_put by st_open
Linus Torvalds [Sun, 19 Jul 2015 21:12:22 +0000 (14:12 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.2.
Things are looking quite decent at this stage but the recent work on
the FPU support took its toll:
- fix an incorrect overly restrictive ifdef
- select O32 64-bit FP support for O32 binary compatibility
- remove workarounds for Sibyte SB1250 Pass1 parts. There are rare
fixing the workarounds is not worth the effort.
- patch up an outdated and now incorrect comment"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
MIPS: SB1: Remove support for Pass 1 parts.
MIPS: Require O32 FP64 support for MIPS64 with O32 compat
MIPS: asm-offset.c: Patch up various comments refering to the old filename.
Linus Torvalds [Sun, 19 Jul 2015 20:46:24 +0000 (13:46 -0700)]
Merge branch 'parisc-4.2-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"A memory leak fix from Christophe Jaillet which was introduced with
kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"
* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: mm: Fix a memory leak related to pmd not attached to the pgd
Linus Torvalds [Sun, 19 Jul 2015 20:37:44 +0000 (13:37 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"By far most of the fixes here are updates to DTS files to deal with
some mostly minor bugs.
There's also a fix to deal with non-PM kernel configs on i.MX, a
regression fix for ethernet on PXA platforms and a dependency fix for
OMAP"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: dts: rename pcie nodes to help override status
ARM: keystone: dts: fix dt bindings for PCIe
ARM: pxa: fix dm9000 platform data regression
ARM: dts: Correct audio input route & set mic bias for am335x-pepper
ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
MAINTAINERS: digicolor: add dts files
ARM: ux500: fix MMC/SD card regression
ARM: ux500: define serial port aliases
ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
ARM: dts: Fix frequency scaling on Gumstix Pepper
ARM: dts: configure regulators for Gumstix Pepper
ARM: dts: omap3: overo: Update LCD panel names
ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
ARM: dts: imx53-qsb: fix TVE entry
ARM: dts: mx23: fix iio-hwmon support
ARM: dts: imx27: Adjust the GPT compatible string
ARM: socfpga: dts: Fix entries order
ARM: socfpga: dts: Fix adxl34x formating and compatible string
Markos Chandras [Thu, 16 Jul 2015 14:30:04 +0000 (15:30 +0100)]
MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
Commit
6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes:
6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Christophe Jaillet [Mon, 13 Jul 2015 09:32:43 +0000 (11:32 +0200)]
parisc: mm: Fix a memory leak related to pmd not attached to the pgd
Commit
0e0da48dee8d ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.
After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd. So 'free_pages'
can never be called anymore, leading to a memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Olof Johansson [Sun, 19 Jul 2015 04:06:10 +0000 (21:06 -0700)]
Merge tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux into fixesD
Merge "pxa fixes for v4.2" from Robert Jarzmik:
ARM: pxa: fixes for v4.2-rc2
This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.
* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
ARM: pxa: fix dm9000 platform data regression
Linus Torvalds [Sat, 18 Jul 2015 18:03:48 +0000 (11:03 -0700)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A small set of ARM fixes for -rc3, most of them not far off
one-liners, with the exception of fixing the V7 cache invalidation for
incoming SMP processors which was causing problems for SoCFPGA
devices"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: fix __virt_to_idmap build error on !MMU
ARM: invalidate L1 before enabling coherency
ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
ARM: 8402/1: perf: Don't use of_node after putting it
ARM: 8400/1: use virt_to_idmap to get phys_reset address
Linus Torvalds [Sat, 18 Jul 2015 17:49:57 +0000 (10:49 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two families of fixes:
- Fix an FPU context related boot crash on newer x86 hardware with
larger context sizes than what most people test. To fix this
without ugly kludges or extensive reverts we had to touch core task
allocator, to allow x86 to determine the task size dynamically, at
boot time.
I've tested it on a number of x86 platforms, and I cross-built it
to a handful of architectures:
(warns) (warns)
testing x86-64: -git: pass ( 0), -tip: pass ( 0)
testing x86-32: -git: pass ( 0), -tip: pass ( 0)
testing arm: -git: pass ( 1359), -tip: pass ( 1359)
testing cris: -git: pass ( 1031), -tip: pass ( 1031)
testing m32r: -git: pass ( 1135), -tip: pass ( 1135)
testing m68k: -git: pass ( 1471), -tip: pass ( 1471)
testing mips: -git: pass ( 1162), -tip: pass ( 1162)
testing mn10300: -git: pass ( 1058), -tip: pass ( 1058)
testing parisc: -git: pass ( 1846), -tip: pass ( 1846)
testing sparc: -git: pass ( 1185), -tip: pass ( 1185)
... so I hope the cross-arch impact 'none', as intended.
(by Dave Hansen)
- Fix various NMI handling related bugs unearthed by the big asm code
rewrite and generally make the NMI code more robust and more
maintainable while at it. These changes are a bit late in the
cycle, I hope they are still acceptable.
(by Andy Lutomirski)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
x86/fpu, sched: Dynamically allocate 'struct fpu'
x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
x86/nmi/64: Make the "NMI executing" variable more consistent
x86/nmi/64: Minor asm simplification
x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
x86/nmi/64: Reorder nested NMI checks
x86/nmi/64: Improve nested NMI comments
x86/nmi/64: Switch stacks on userspace NMI entry
x86/nmi/64: Remove asm code that saves CR2
x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
Linus Torvalds [Sat, 18 Jul 2015 17:49:11 +0000 (10:49 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix for a misplaced export that can cause build failures in certain
(rare) Kconfig situations"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Move the export of tick_broadcast_oneshot_control to the proper place
Linus Torvalds [Sat, 18 Jul 2015 17:47:44 +0000 (10:47 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"A oneliner rq throttling fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Test list head instead of list entry in throttle_cfs_rq()
Linus Torvalds [Sat, 18 Jul 2015 17:44:21 +0000 (10:44 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Really allow to specify custom CC, AR or LD
perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
perf hists browser: Take the --comm, --dsos, etc filters into account
perf symbols: Store if there is a filter in place
x86, perf: Fix static_key bug in load_mm_cr4()
tools: Copy lib/hweight.c from the kernel sources
perf tools: Fix the detached tarball wrt rbtree copy
perf thread_map: Fix the sizeof() calculation for map entries
tools lib: Improve clean target
perf stat: Fix shadow declaration of close
perf tools: Fix lockup using 32-bit compat vdso
Linus Torvalds [Sat, 18 Jul 2015 17:27:12 +0000 (10:27 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irq fixes:
- two driver fixes
- a Xen regression fix
- a nested irq thread crash fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gicv3-its: Fix mapping of LPIs to collections
genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
gpio/davinci: Fix race in installing chained irq handler
Linus Torvalds [Sat, 18 Jul 2015 17:01:04 +0000 (10:01 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"25 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
lib/decompress: set the compressor name to NULL on error
mm/cma_debug: correct size input to bitmap function
mm/cma_debug: fix debugging alloc/free interface
mm/page_owner: set correct gfp_mask on page_owner
mm/page_owner: fix possible access violation
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
/proc/$PID/cmdline: fixup empty ARGV case
dma-debug: skip debug_dma_assert_idle() when disabled
hexdump: fix for non-aligned buffers
checkpatch: fix long line messages about patch context
mm: clean up per architecture MM hook header files
MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
mailmap: update Sudeep Holla's email id
Update Viresh Kumar's email address
mm, meminit: suppress unused memory variable warning
configfs: fix kernel infoleak through user-controlled format string
include, lib: add __printf attributes to several function prototypes
s390/hugetlb: add hugepages_supported define
mm: hugetlb: allow hugepages_supported to be architecture specific
revert "s390/mm: make hugepages_supported a boot time decision"
...
Linus Torvalds [Sat, 18 Jul 2015 04:46:57 +0000 (21:46 -0700)]
Merge branch 'for-linus-4.2' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"These are all from Filipe, and cover a few problems we've had reported
on the list recently (along with ones he found on his own)"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix file corruption after cloning inline extents
Btrfs: fix order by which delayed references are run
Btrfs: fix list transaction->pending_ordered corruption
Btrfs: fix memory leak in the extent_same ioctl
Btrfs: fix shrinking truncate when the no_holes feature is enabled
Linus Torvalds [Sat, 18 Jul 2015 04:24:31 +0000 (21:24 -0700)]
Merge tag 'rtc-v4.2-2' of git://git./linux/kernel/git/abelloni/linux
Pull rtc fixes from Alexandre Belloni:
"A few fixes for the RTC susbsystem for 4.2.
The mt6397 driver was introduce in 4.2 so it is worth fixing before
the final release. I though the compilation warning for armada38x was
fixed by akpm in commit
f98b733e93e0 ("rtc-armada38x.c: remove unused
local `flags'") but he actually missed some occurrences of the
variables. Since I received 4 patches for that, I think we can
include it now.
Summary:
- fix mt6397 wakealarm creation
- remove a compilation warning for armada38x that was forgotten"
* tag 'rtc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: armada38x: Remove unused variable from armada38x_rtc_set_time()
rtc: mt6397: enable wakeup before registering rtc device
Linus Torvalds [Sat, 18 Jul 2015 03:53:57 +0000 (20:53 -0700)]
Merge tag 'dm-4.2-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- revert a request-based DM core change that caused IO latency to
increase and adversely impact both throughput and system load
- fix for a use after free bug in DM core's device cleanup
- a couple DM btree removal fixes (used by dm-thinp)
- a DM thinp fix for order-5 allocation failure
- a DM thinp fix to not degrade to read-only metadata mode when in
out-of-data-space mode for longer than the 'no_space_timeout'
- fix a long-standing oversight in both dm-thinp and dm-cache by now
exporting 'needs_check' in status if it was set in metadata
- fix an embarrassing dm-cache busy-loop that caused worker threads to
eat cpu even if no IO was actively being issued to the cache device
* tag 'dm-4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: avoid calls to prealloc_free_structs() if possible
dm cache: avoid preallocation if no work in writeback_some_dirty_blocks()
dm cache: do not wake_worker() in free_migration()
dm cache: display 'needs_check' in status if it is set
dm thin: display 'needs_check' in status if it is set
dm thin: stay in out-of-data-space mode once no_space_timeout expires
dm: fix use after free crash due to incorrect cleanup sequence
Revert "dm: only run the queue on completion if congested or no requests pending"
dm btree: silence lockdep lock inversion in dm_btree_del()
dm thin: allocate the cell_sort_array dynamically
dm btree remove: fix bug in redistribute3
Ingo Molnar [Fri, 17 Jul 2015 10:28:12 +0000 (12:28 +0200)]
x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.
Also optimize the x86 code a bit by caching task_struct_size.
Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Hansen [Fri, 17 Jul 2015 10:28:11 +0000 (12:28 +0200)]
x86/fpu, sched: Dynamically allocate 'struct fpu'
The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).
Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already. This saves from doing an extra slab
allocation at fork().
The only real downside here is that we have to stick everything
and the end of the task_struct. But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Aneesh Kumar K.V [Fri, 17 Jul 2015 23:24:26 +0000 (16:24 -0700)]
lib/decompress: set the compressor name to NULL on error
Without this we end up using the previous name of the compressor in the
loop in unpack_rootfs. For example we get errors like "compression
method gzip not configured" even when we have CONFIG_DECOMPRESS_GZIP
enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 17 Jul 2015 23:24:23 +0000 (16:24 -0700)]
mm/cma_debug: correct size input to bitmap function
In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of
bitmap is cma->count >> order_per_bits rather than just cma->count.
This patch fixes it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 17 Jul 2015 23:24:20 +0000 (16:24 -0700)]
mm/cma_debug: fix debugging alloc/free interface
CMA has alloc/free interface for debugging. It is intended that
alloc/free occurs in specific CMA region, but, currently, alloc/free
interface is on root dir due to the bug so we can't select CMA region
where alloc/free happens.
This patch fixes this problem by making alloc/free interface per CMA
region.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 17 Jul 2015 23:24:18 +0000 (16:24 -0700)]
mm/page_owner: set correct gfp_mask on page_owner
Currently, we set wrong gfp_mask to page_owner info in case of isolated
freepage by compaction and split page. It causes incorrect mixed
pageblock report that we can get from '/proc/pagetypeinfo'. This metric
is really useful to measure fragmentation effect so should be accurate.
This patch fixes it by setting correct information.
Without this patch, after kernel build workload is finished, number of
mixed pageblock is 112 among roughly 210 movable pageblocks.
But, with this fix, output shows that mixed pageblock is just 57.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 17 Jul 2015 23:24:15 +0000 (16:24 -0700)]
mm/page_owner: fix possible access violation
When I tested my new patches, I found that page pointer which is used
for setting page_owner information is changed. This is because page
pointer is used to set new migratetype in loop. After this work, page
pointer could be out of bound. If this wrong pointer is used for
page_owner, access violation happens. Below is error message that I
got.
BUG: unable to handle kernel paging request at
0000000000b00018
IP: [<
ffffffff81025f30>] save_stack_address+0x30/0x40
PGD
1af2d067 PUD
166e0067 PMD 0
Oops: 0002 [#1] SMP
...snip...
Call Trace:
print_context_stack+0xcf/0x100
dump_trace+0x15f/0x320
save_stack_trace+0x2f/0x50
__set_page_owner+0x46/0x70
__isolate_free_page+0x1f7/0x210
split_free_page+0x21/0xb0
isolate_freepages_block+0x1e2/0x410
compaction_alloc+0x22d/0x2d0
migrate_pages+0x289/0x8b0
compact_zone+0x409/0x880
compact_zone_order+0x6d/0x90
try_to_compact_pages+0x110/0x210
__alloc_pages_direct_compact+0x3d/0xe6
__alloc_pages_nodemask+0x6cd/0x9a0
alloc_pages_current+0x91/0x100
runtest_store+0x296/0xa50
simple_attr_write+0xbd/0xe0
__vfs_write+0x28/0xf0
vfs_write+0xa9/0x1b0
SyS_write+0x46/0xb0
system_call_fastpath+0x16/0x75
This patch fixes this error by moving up set_page_owner().
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 17 Jul 2015 23:24:12 +0000 (16:24 -0700)]
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so when fsnotify_destroy_mark_locked() drops
mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and we dereference free
memory in the loop there.
Fix the problem by keeping mark_mutex held in
fsnotify_destroy_mark_locked(). The reason why we drop that mutex is that
we need to call a ->freeing_mark() callback which may acquire mark_mutex
again. To avoid this and similar lock inversion issues, we move the call
to ->freeing_mark() callback to the kthread destroying the mark.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Ashish Sangwan <a.sangwan@samsung.com>
Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 17 Jul 2015 23:24:09 +0000 (16:24 -0700)]
/proc/$PID/cmdline: fixup empty ARGV case
/proc/*/cmdline code checks if it should look at ENVP area by checking
last byte of ARGV area:
rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
if (rv <= 0)
goto out_free_page;
If ARGV is somehow made empty (by doing execve(..., NULL, ...) or
manually setting ->arg_start and ->arg_end to equal values), the decision
will be based on byte which doesn't even belong to ARGV/ENVP.
So, quickly check if ARGV area is empty and report 0 to match previous
behaviour.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Haggai Eran [Fri, 17 Jul 2015 23:24:06 +0000 (16:24 -0700)]
dma-debug: skip debug_dma_assert_idle() when disabled
If dma-debug is disabled due to a memory error, DMA unmaps do not affect
the dma_active_cacheline radix tree anymore, and debug_dma_assert_idle()
can print false warnings.
Disable debug_dma_assert_idle() when dma_debug_disabled() is true.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Fixes:
0abdd7a81b7e ("dma-debug: introduce debug_dma_assert_idle()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Horacio Mijail Anton Quiles [Fri, 17 Jul 2015 23:24:04 +0000 (16:24 -0700)]
hexdump: fix for non-aligned buffers
A hexdump with a buf not aligned to the groupsize causes
non-naturally-aligned memory accesses. This was causing a kernel panic
on the processor BlackFin BF527, when such an unaligned buffer was fed
by the function ubifs_scanned_corruption in fs/ubifs/scan.c .
To fix this, change accesses to the contents of the buffer so they go
through get_unaligned(). This change should be harmless to unaligned-
access-capable architectures, and any performance hit should be anyway
dwarfed by the snprintf() processing time.
Signed-off-by: Horacio Mijail Antón Quiles <hmijail@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 17 Jul 2015 23:24:01 +0000 (16:24 -0700)]
checkpatch: fix long line messages about patch context
Changes in ("checkpatch: categorize some long line length checks")
now erroneously reports long line defects in patch context.
Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Fri, 17 Jul 2015 23:23:58 +0000 (16:23 -0700)]
mm: clean up per architecture MM hook header files
Commit
2ae416b142b6 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.
As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.
The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Fri, 17 Jul 2015 23:23:55 +0000 (16:23 -0700)]
MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudeep Holla [Fri, 17 Jul 2015 23:23:53 +0000 (16:23 -0700)]
mailmap: update Sudeep Holla's email id
Since the get_maintainer script still reports my old email id based on
few old commits, update mailmap to report new/updated address. It also
helps to fix email address for 'git shortlog'
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Viresh Kumar [Fri, 17 Jul 2015 23:23:50 +0000 (16:23 -0700)]
Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Fri, 17 Jul 2015 23:23:48 +0000 (16:23 -0700)]
mm, meminit: suppress unused memory variable warning
The kbuild test robot reported the following
tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head:
14a6f1989dae9445d4532941bdd6bbad84f4c8da
commit:
3b242c66ccbd60cf47ab0e8992119d9617548c23 x86: mm: enable deferred struct page initialisation on x86-64
date: 3 days ago
config: x86_64-randconfig-x006-201527 (attached as .config)
reproduce:
git checkout
3b242c66ccbd60cf47ab0e8992119d9617548c23
# save the attached .config to linux build tree
make ARCH=x86_64
All warnings (new ones prefixed by >>):
mm/page_alloc.c: In function 'early_page_uninitialised':
>> mm/page_alloc.c:247:6: warning: unused variable 'nid' [-Wunused-variable]
int nid = early_pfn_to_nid(pfn);
It's due to the NODE_DATA macro ignoring the nid parameter on !NUMA
configurations. This patch avoids the warning by not declaring nid.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Iooss [Fri, 17 Jul 2015 23:23:45 +0000 (16:23 -0700)]
configfs: fix kernel infoleak through user-controlled format string
Some modules call config_item_init_type_name() and config_group_init_type_name()
with parameter "name" directly controlled by userspace. These two
functions call config_item_set_name() with this name used as a format
string, which can be used to leak information such as content of the
stack to userspace.
For example, make_netconsole_target() in netconsole module calls
config_item_init_type_name() with the name of a newly-created directory.
This means that the following commands give some unexpected output, with
configfs mounted in /sys/kernel/config/ and on a system with a
configured eth0 ethernet interface:
# modprobe netconsole
# mkdir /sys/kernel/config/netconsole/target_%lx
# echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
# echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled
# echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
# dmesg |tail -n1
[ 142.697668] netconsole: target (target_ffffffffc0ae8080) is
enabled, disable to update parameters
The directory name is correct but %lx has been interpreted in the
internal item name, displayed here in the error message used by
store_dev_name() in drivers/net/netconsole.c.
To fix this, update every caller of config_item_set_name to use "%s"
when operating on untrusted input.
This issue was found using -Wformat-security gcc flag, once a __printf
attribute has been added to config_item_set_name().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Iooss [Fri, 17 Jul 2015 23:23:42 +0000 (16:23 -0700)]
include, lib: add __printf attributes to several function prototypes
Using __printf attributes helps to detect several format string issues
at compile time (even though -Wformat-security is currently disabled in
Makefile). For example it can detect when formatting a pointer as a
number, like the issue fixed in commit
a3fa71c40f18 ("wl18xx: show
rx_frames_per_rates as an array as it really is"), or when the arguments
do not match the format string, c.f. for example commit
5ce1aca81435
("reiserfs: fix __RASSERT format string").
To prevent similar bugs in the future, add a __printf attribute to every
function prototype which needs one in include/linux/ and lib/. These
functions were mostly found by using gcc's -Wsuggest-attribute=format
flag.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dominik Dingel [Fri, 17 Jul 2015 23:23:39 +0000 (16:23 -0700)]
s390/hugetlb: add hugepages_supported define
On s390 we only can enable hugepages if the underlying hardware/hypervisor
also does support this. Common code now would assume this to be
signaled by setting HPAGE_SHIFT to 0. But on s390, where we only
support one hugepage size, there is a link between HPAGE_SHIFT and
pageblock_order.
So instead of setting HPAGE_SHIFT to 0, we will implement the check for
the hardware capability.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dominik Dingel [Fri, 17 Jul 2015 23:23:37 +0000 (16:23 -0700)]
mm: hugetlb: allow hugepages_supported to be architecture specific
s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change
e.g. the pageblock_order, which should be independent in respect to
hugepage support.
With this patch every architecture is free to define how to check
for hugepage support.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dominik Dingel [Fri, 17 Jul 2015 23:23:34 +0000 (16:23 -0700)]
revert "s390/mm: make hugepages_supported a boot time decision"
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.
The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().
Revert
bea41197ead3 ("s390/mm: make hugepages_supported a boot time
decision") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log