git.stricted.de - GitHub/LineageOS/android_kernel_motorola

sched: Refactor task_struct to use numa_faults instead of numa_* pointers

This patch simplifies task_struct by removing the four numa_* pointers
in the same array and replacing them with the array pointer. By doing this,
on x86_64, the size of task_struct is reduced by 3 ulong pointers (24 bytes on
x86_64).

A new parameter is added to the task_faults_idx function so that it can return
an index to the correct offset, corresponding with the old precalculated
pointers.

All of the code in sched/ that depended on task_faults_idx and numa_* was
changed in order to match the new logic.

Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: dave@stgolabs.net
Cc: riel@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141031001331.GA30662@winterfell
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Don't check CONFIG_SMP in switched_from_dl()

There are both UP and SMP version of pull_dl_task(), so don't need
to check CONFIG_SMP in switched_from_dl();

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-6-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Reschedule from switched_from_dl() after a successful pull

In switched_from_dl() we have to issue a resched if we successfully
pulled some task from other cpus. This patch also aligns the behavior
with -rt.

Suggested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-5-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Push task away if the deadline is equal to curr during wakeup

This patch pushes task away if the dealine of the task is equal
to current during wake up. The same behavior as rt class.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-4-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Add deadline rq status print

This patch add deadline rq status print.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-3-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Fix artificial overrun introduced by yield_task_dl()

The yield semantic of deadline class is to reduce remaining runtime to
zero, and then update_curr_dl() will stop it. However, comsumed bandwidth
is reduced from the budget of yield task again even if it has already been
set to zero which leads to artificial overrun. This patch fix it by make
sure we don't steal some more time from the task that yielded in update_curr_dl().

Suggested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-2-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/rt: Clean up check_preempt_equal_prio()

This patch checks if current can be pushed/pulled somewhere else
in advance to make logic clear, the same behavior as dl class.

- If current can't be migrated, useless to reschedule, let's hope
task can move out.
- If task is migratable, so let's not schedule it and see if it
can be pushed or pulled somewhere else.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414708776-124078-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/core: Use dl_bw_of() under rcu_read_lock_sched()

As per commit f10e00f4bf36 ("sched/dl: Use dl_bw_of() under
rcu_read_lock_sched()"), dl_bw_of() has to be protected by
rcu_read_lock_sched().

Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414497286-28824-1-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu

Idle cpu is idler than non-idle cpu, so we needn't search for least_loaded_cpu
after we have found an idle cpu.

Signed-off-by: Yao Dongdong <yaodongdong@huawei.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414469286-6023-1-git-send-email-yaodongdong@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Implement cancel_dl_timer() to use in switched_from_dl()

Currently used hrtimer_try_to_cancel() is racy:

raw_spin_lock(&rq->lock)
...                            dl_task_timer                 raw_spin_lock(&rq->lock)
...                               raw_spin_lock(&rq->lock)   ...
   switched_from_dl()             ...                        ...
      hrtimer_try_to_cancel()     ...                        ...
   switched_to_fair()             ...                        ...
...                               ...                        ...
...                               ...                        ...
raw_spin_unlock(&rq->lock)        ...                        (asquired)
...                               ...                        ...
...                               ...                        ...
do_exit()                         ...                        ...
   schedule()                     ...                        ...
      raw_spin_lock(&rq->lock)    ...                        raw_spin_unlock(&rq->lock)
      ...                         ...                        ...
      raw_spin_unlock(&rq->lock)  ...                        raw_spin_lock(&rq->lock)
      ...                         ...                        (asquired)
      put_task_struct()           ...                        ...
          free_task_struct()      ...                        ...
      ...                         ...                        raw_spin_unlock(&rq->lock)
...                               (asquired)                 ...
...                               ...                        ...
...                               (use after free)           ...

So, let's implement 100% guaranteed way to cancel the timer and let's
be sure we are safe even in very unlikely situations.

rq unlocking does not limit the area of switched_from_dl() use, because
this has already been possible in pull_dl_task() below.

Let's consider the safety of of this unlocking. New code in the patch
is working when hrtimer_try_to_cancel() fails. This means the callback
is running. In this case hrtimer_cancel() is just waiting till the
callback is finished. Two

1) Since we are in switched_from_dl(), new class is not dl_sched_class and
new prio is not less MAX_DL_PRIO. So, the callback returns early; it's
right after !dl_task() check. After that hrtimer_cancel() returns back too.

The above is:

raw_spin_lock(rq->lock);                  ...
...                                       dl_task_timer()
...                                          raw_spin_lock(rq->lock);
   switched_from_dl()                        ...
       hrtimer_try_to_cancel()               ...
          raw_spin_unlock(rq->lock);         ...
          hrtimer_cancel()                   ...
          ...                                raw_spin_unlock(rq->lock);
          ...                                return HRTIMER_NORESTART;
          ...                             ...
          raw_spin_lock(rq->lock);        ...

2) But the below is also possible:
                                   dl_task_timer()
                                      raw_spin_lock(rq->lock);
                                      ...
                                      raw_spin_unlock(rq->lock);
raw_spin_lock(rq->lock);              ...
   switched_from_dl()                 ...
       hrtimer_try_to_cancel()        ...
       ...                            return HRTIMER_NORESTART;
       raw_spin_unlock(rq->lock);  ...
       hrtimer_cancel();           ...
       raw_spin_lock(rq->lock);    ...

In this case hrtimer_cancel() returns immediately. Very unlikely case,
just to mention.

Nobody can manipulate the task, because check_class_changed() is
always called with pi_lock locked. Nobody can force the task to
participate in (concurrent) priority inheritance schemes (the same reason).

All concurrent task operations require pi_lock, which is held by us.
No deadlocks with dl_task_timer() are possible, because it returns
right after !dl_task() check (it does nothing).

If we receive a new dl_task during the time of unlocked rq, we just
don't have to do pull_dl_task() in switched_from_dl() further.

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
[ Added comments]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414420852.19914.186.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Use WARN_ONCE for the might_sleep() TASK_RUNNING test

In some cases this can trigger a true flood of output.

Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

netdev, sched/wait: Fix sleeping inside wait event

rtnl_lock_unregistering*() take rtnl_lock() -- a mutex -- inside a
wait loop. The wait loop relies on current->state to function, but so
does mutex_lock(), nesting them makes for the inner to destroy the
outer state.

Fix this using the new wait_woken() bits.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <cwang@twopensource.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com>
Cc: stephen hemminger <stephen@networkplumber.org>
Cc: Tom Gundersen <teg@jklm.no>
Cc: Tom Herbert <therbert@google.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20141029173110.GE15602@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

rfcomm, sched/wait: Fix broken wait construct

rfcomm_run() is a tad broken in that is has a nested wait loop. One
cannot rely on p->state for the outer wait because the inner wait will
overwrite it.

Fix this using the new wait_woken() facility.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Joe Perches <joe@perches.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Vignesh Raman <Vignesh_Raman@mentor.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

audit, sched/wait: Fixup kauditd_thread() wait loop

The kauditd_thread wait loop is a bit iffy; it has a number of problems:

- calls try_to_freeze() before schedule(); you typically want the
   thread to re-evaluate the sleep condition when unfreezing, also
   freeze_task() issues a wakeup.

- it unconditionally does the {add,remove}_wait_queue(), even when the
   sleep condition is false.

Use wait_event_freezable() that does the right thing.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: oleg@redhat.com
Cc: Eric Paris <eparis@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141002102251.GA6324@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/wait: Remove wait_event_freezekillable()

There is no user.. make it go away.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: oleg@redhat.com
Cc: Rafael Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/wait: Reimplement wait_event_freezable()

Provide better implementations of wait_event_freezable() APIs.

The problem is with freezer_do_not_count(), it hides the thread from
the freezer, even though this thread might not actually freeze/sleep
at all.

Cc: oleg@redhat.com
Cc: Rafael Wysocki <rjw@rjwysocki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-d86fz1jmso9wjxa8jfpinp8o@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/wait: Fix a kthread race with wait_woken()

There is a race between kthread_stop() and the new wait_woken() that
can result in a lack of progress.

CPU 0                                    | CPU 1
                                         |
rfcomm_run()                             | kthread_stop()
  ...                                    |
  if (!test_bit(KTHREAD_SHOULD_STOP))    |
                                         |   set_bit(KTHREAD_SHOULD_STOP)
                                         |   wake_up_process()
    wait_woken()                         |   wait_for_completion()
      set_current_state(INTERRUPTIBLE)   |
      if (!WQ_FLAG_WOKEN)                |
        schedule_timeout()               |
                                         |

After which both tasks will wait.. forever.

Fix this by having wait_woken() check for kthread_should_stop() but
only for kthreads (obviously).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Exclude cond_resched() from nested sleep test

cond_resched() is a preemption point, not strictly a blocking
primitive, so exclude it from the ->state test.

In particular, preemption preserves task_struct::state.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: oleg@redhat.com
Cc: Alex Elder <alex.elder@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Axel Lin <axel.lin@ingics.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140924082242.656559952@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Debug nested sleeps

Validate we call might_sleep() with TASK_RUNNING, which catches places
where we nest blocking primitives, eg. mutex usage in a wait loop.

Since all blocking is arranged through task_struct::state, nesting
this will cause the inner primitive to set TASK_RUNNING and the outer
will thus not block.

Another observed problem is calling a blocking function from
schedule()->sched_submit_work()->blk_schedule_flush_plug() which will
then destroy the task state for the actual __schedule() call that
comes after it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: oleg@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082242.591637616@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, net: Clean up sk_wait_event() vs. might_sleep()

WARNING: CPU: 1 PID: 1744 at kernel/sched/core.c:7104 __might_sleep+0x58/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff81070e10>] prepare_to_wait+0x50 /0xa0

[<ffffffff8105bc38>] __might_sleep+0x58/0x90
[<ffffffff8148c671>] lock_sock_nested+0x31/0xb0
[<ffffffff81498aaa>] sk_stream_wait_memory+0x18a/0x2d0

Which is a false positive because sk_wait_event() will already have
TASK_RUNNING at that point if it would've gone through
schedule_timeout().

So annotate with sched_annotate_sleep(); which goes away on !DEBUG builds.

Reported-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140924082242.524407432@infradead.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: netdev@vger.kernel.org
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, modules: Fix nested sleep in add_unformed_module()

This is a genuine bug in add_unformed_module(), we cannot use blocking
primitives inside a wait loop.

So rewrite the wait_event_interruptible() usage to use the fresh
wait_woken() stuff.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: oleg@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20140924082242.458562904@infradead.org
[ So this is probably complex to backport and the race wasn't reported AFAIK,
so not marked for -stable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, smp: Correctly deal with nested sleeps

smp_hotplug_thread::{setup,unpark} functions can sleep too, so be
consistent and do the same for all callbacks.

__might_sleep+0x74/0x80
kmem_cache_alloc_trace+0x4e/0x1c0
perf_event_alloc+0x55/0x450
perf_event_create_kernel_counter+0x2f/0x100
watchdog_nmi_enable+0x8d/0x160
watchdog_enable+0x45/0x90
smpboot_thread_fn+0xec/0x2b0
kthread+0xe4/0x100
ret_from_fork+0x7c/0xb0

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: oleg@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082242.392279328@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, tty: Deal with nested sleeps

n_tty_{read,write} are wait loops with sleeps in. Wait loops rely on
task_struct::state and sleeps do too, since that's the only means of
actually sleeping. Therefore the nested sleeps destroy the wait loop
state.

Fix this by using the new woken_wake_function and wait_woken() stuff,
which registers wakeups in wait and thereby allows shrinking the
task_state::state changes to the actual sleep part.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: oleg@redhat.com
Link: http://lkml.kernel.org/r/20140924082242.323011233@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, inotify: Deal with nested sleeps

inotify_read is a wait loop with sleeps in. Wait loops rely on
task_struct::state and sleeps do too, since that's the only means of
actually sleeping. Therefore the nested sleeps destroy the wait loop
state and the wait loop breaks the sleep functions that assume
TASK_RUNNING (mutex_lock).

Fix this by using the new woken_wake_function and wait_woken() stuff,
which registers wakeups in wait and thereby allows shrinking the
task_state::state changes to the actual sleep part.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140924082242.254858080@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched, exit: Deal with nested sleeps

do_wait() is a big wait loop, but we set TASK_RUNNING too late; we end
up calling potential sleeps before we reset it.

Not strictly a bug since we're guaranteed to exit the loop and not
call schedule(); put in annotations to quiet might_sleep().

WARNING: CPU: 0 PID: 1 at ../kernel/sched/core.c:7123 __might_sleep+0x7e/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109a788>] do_wait+0x88/0x270

Call Trace:
  [<ffffffff81694991>] dump_stack+0x4e/0x7a
  [<ffffffff8109877c>] warn_slowpath_common+0x8c/0xc0
  [<ffffffff8109886c>] warn_slowpath_fmt+0x4c/0x50
  [<ffffffff810bca6e>] __might_sleep+0x7e/0x90
  [<ffffffff811a1c15>] might_fault+0x55/0xb0
  [<ffffffff8109a3fb>] wait_consider_task+0x90b/0xc10
  [<ffffffff8109a804>] do_wait+0x104/0x270
  [<ffffffff8109b837>] SyS_wait4+0x77/0x100
  [<ffffffff8169d692>] system_call_fastpath+0x16/0x1b

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: umgwanakikbuti@gmail.com
Cc: ilya.dryomov@inktank.com
Cc: Alex Elder <alex.elder@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Axel Lin <axel.lin@ingics.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Guillaume Morin <guillaume@morinfr.org>
Cc: Ionut Alexa <ionut.m.alexa@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140924082242.186408915@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/wait: Add might_sleep() checks

Add more might_sleep() checks, suppose someone put a wait_event() like
thing in a wait loop..

Can't put might_sleep() in ___wait_event() because there's the locked
primitives which call ___wait_event() with locks held.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082242.119255706@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/wait: Provide infrastructure to deal with nested blocking

There are a few places that call blocking primitives from wait loops,
provide infrastructure to support this without the typical
task_struct::state collision.

We record the wakeup in wait_queue_t::flags which leaves
task_struct::state free to be used by others.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082242.051202318@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/mutex: Don't assume TASK_RUNNING

We're going to make might_sleep() test for TASK_RUNNING, because
blocking without TASK_RUNNING will destroy the task state by setting
it to TASK_RUNNING.

There are a few occasions where its 'valid' to call blocking
primitives (and mutex_lock in particular) and not have TASK_RUNNING,
typically such cases are right before we set TASK_RUNNING anyhow.

Robustify the code by not assuming this; this has the beneficial side
effect of allowing optional code emission for fixing the above
might_sleep() false positives.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082241.988560063@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Don't balance during wakeup if wakee is pinned

Use nr_cpus_allowed to bail from select_task_rq() when only one cpu
can be used, and saves some cycles for pinned tasks.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413253360-5318-2-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Don't check SD_BALANCE_FORK

There is no need to do balance during fork since SCHED_DEADLINE
tasks can't fork. This patch avoid the SD_BALANCE_FORK check.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1413253360-5318-1-git-send-email-wanpeng.li@linux.intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Ensure that updates to exclusive cpusets don't break AC

How we deal with updates to exclusive cpusets is currently broken.
As an example, suppose we have an exclusive cpuset composed of
two cpus: A[cpu0,cpu1]. We can assign SCHED_DEADLINE task to it
up to the allowed bandwidth. If we want now to modify cpusetA's
cpumask, we have to check that removing a cpu's amount of
bandwidth doesn't break AC guarantees. This thing isn't checked
in the current code.

This patch fixes the problem above, denying an update if the
new cpumask won't have enough bandwidth for SCHED_DEADLINE tasks
that are currently active.

Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: cgroups@vger.kernel.org
Link: http://lkml.kernel.org/r/5433E6AF.5080105@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Fix bandwidth check/update when migrating tasks between exclusive cpusets

Exclusive cpusets are the only way users can restrict SCHED_DEADLINE tasks
affinity (performing what is commonly called clustered scheduling).
Unfortunately, such thing is currently broken for two reasons:

- No check is performed when the user tries to attach a task to
   an exlusive cpuset (recall that exclusive cpusets have an
   associated maximum allowed bandwidth).

- Bandwidths of source and destination cpusets are not correctly
   updated after a task is migrated between them.

This patch fixes both things at once, as they are opposite faces
of the same coin.

The check is performed in cpuset_can_attach(), as there aren't any
points of failure after that function. The updated is split in two
halves. We first reserve bandwidth in the destination cpuset, after
we pass the check in cpuset_can_attach(). And we then release
bandwidth from the source cpuset when the task's affinity is
actually changed. Even if there can be time windows when sched_setattr()
may erroneously fail in the source cpuset, we are fine with it, as
we can't perfom an atomic update of both cpusets at once.

Reported-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Reported-by: Vincent Legout <vincent@legout.info>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Fabio Checconi <fchecconi@gmail.com>
Cc: michael@amarulasolutions.com
Cc: luca.abeni@unitn.it
Cc: Li Zefan <lizefan@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Link: http://lkml.kernel.org/r/1411118561-26323-3-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Do not try to push tasks if pinned task switches to dl

As Kirill mentioned (https://lkml.org/lkml/2013/1/29/118):

| If rq has already had 2 or more pushable tasks and we try to add a
| pinned task then call of push_rt_task will just waste a time.

Just switched pinned task is not able to be pushed. If the rq has had
several dl tasks before they have already been considered as candidates
to be pushed (or pulled). This patch implements the same behavior as rt
class which introduced by commit 10447917551e ("sched/rt: Do not try to
push tasks if pinned task switches to RT").

Suggested-by: Kirill V Tkhai <tkhai@yandex.ru>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413938203-224610-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Kill task_preempt_count()

task_preempt_count() is pointless if preemption counter is per-cpu,
currently this is x86 only. It is only valid if the task is not
running, and even in this case the only info it can provide is the
state of PREEMPT_ACTIVE bit.

Change its single caller to check p->on_rq instead, this should be
the same if p->state != TASK_RUNNING, and kill this helper.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/20141008183348.GC17495@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Make finish_task_switch() return 'struct rq *'

Both callers of finish_task_switch() need to recalculate this_rq()
and pass it as an argument, plus __schedule() does this again after
context_switch().

It would be simpler to call this_rq() once in finish_task_switch()
and return the this rq to the callers.

Note: probably "int cpu" in __schedule() should die; it is not used
and both rcu_note_context_switch() and wq_worker_sleeping() do not
really need this argument.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141009193232.GB5408@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Fix schedule_tail() to disable preemption

finish_task_switch() enables preemption, so post_schedule(rq) can be
called on the wrong (and even dead) CPU. Afaics, nothing really bad
can happen, but in this case we can wrongly clear rq->post_schedule
on that CPU. And this simply looks wrong in any case.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141008193644.GA32055@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Fix the PREEMPT_ACTIVE check in __trace_sched_switch_state()

task_preempt_count() has nothing to do with the actual preempt counter,
thread_info->saved_preempt_count is only valid right after switch_to().

__trace_sched_switch_state() can use preempt_count(), prev is still the
current task when trace_sched_switch() is called.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[ Added BUG_ON(). ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20141007195108.GB28002@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Check all nodes when placing a pseudo-interleaved group

In pseudo-interleaved numa_groups, all tasks try to relocate to
the group's preferred_nid. When a group is spread across multiple
NUMA nodes, this can lead to tasks swapping their location with
other tasks inside the same group, instead of swapping location with
tasks from other NUMA groups. This can keep NUMA groups from converging.

Examining all nodes, when dealing with a task in a pseudo-interleaved
NUMA group, avoids this problem. Note that only CPUs in nodes that
improve the task or group score are examined, so the loop isn't too
bad.

Tested-by: Vinod Chegu <chegu_vinod@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Vinod Chegu" <chegu_vinod@hp.com>
Cc: mgorman@suse.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141009172747.0d97c38c@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Find the preferred nid with complex NUMA topology

On systems with complex NUMA topologies, the node scoring is adjusted
to allow workloads to converge on nodes that are near each other.

The way a task group's preferred nid is determined needs to be adjusted,
in order for the preferred_nid to be consistent with group_weight scoring.
This ensures that we actually try to converge workloads on adjacent nodes.

Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413530994-9732-6-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Calculate node scores in complex NUMA topologies

In order to do task placement on systems with complex NUMA topologies,
it is necessary to count the faults on nodes nearby the node that is
being examined for a potential move.

In case of a system with a backplane interconnect, we are dealing with
groups of NUMA nodes; each of the nodes within a group is the same number
of hops away from nodes in other groups in the system. Optimal placement
on this topology is achieved by counting all nearby nodes equally. When
comparing nodes A and B at distance N, nearby nodes are those at distances
smaller than N from nodes A or B.

Placement strategy on a system with a glueless mesh NUMA topology needs
to be different, because there are no natural groups of nodes determined
by the hardware. Instead, when dealing with two nodes A and B at distance
N, N >= 2, there will be intermediate nodes at distance < N from both nodes
A and B. Good placement can be achieved by right shifting the faults on
nearby nodes by the number of hops from the node being scored. In this
context, a nearby node is any node less than the maximum distance in the
system away from the node. Those nodes are skipped for efficiency reasons,
there is no real policy reason to do so.

Placement policy on directly connected NUMA systems is not affected.

Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Link: http://lkml.kernel.org/r/1413530994-9732-5-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Prepare for complex topology placement

Preparatory patch for adding NUMA placement on systems with
complex NUMA topology. Also fix a potential divide by zero
in group_weight()

Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413530994-9732-4-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Classify the NUMA topology of a system

Smaller NUMA systems tend to have all NUMA nodes directly connected
to each other. This includes the degenerate case of a system with just
one node, ie. a non-NUMA system.

Larger systems can have two kinds of NUMA topology, which affects how
tasks and memory should be placed on the system.

On glueless mesh systems, nodes that are not directly connected to
each other will bounce traffic through intermediary nodes. Task groups
can be run closer to each other by moving tasks from a node to an
intermediary node between it and the task's preferred node.

On NUMA systems with backplane controllers, the intermediary hops
are incapable of running programs. This creates "islands" of nodes
that are at an equal distance to anywhere else in the system.

Each kind of topology requires a slightly different placement
algorithm; this patch provides the mechanism to detect the kind
of NUMA topology of a system.

Signed-off-by: Rik van Riel <riel@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
[ Changed to use kernel/sched/sched.h ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Link: http://lkml.kernel.org/r/1413530994-9732-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Export info needed for NUMA balancing on complex topologies

Export some information that is necessary to do placement of
tasks on systems with multi-level NUMA topologies.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413530994-9732-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/dl: Fix preemption checks

1) switched_to_dl() check is wrong. We reschedule only
   if rq->curr is deadline task, and we do not reschedule
   if it's a lower priority task. But we must always
   preempt a task of other classes.

2) dl_task_timer():
   Policy does not change in case of priority inheritance.
   rt_mutex_setprio() changes prio, while policy remains old.

So we lose some balancing logic in dl_task_timer() and
switched_to_dl() when we check policy instead of priority. Boosted
task may be rq->curr.

(I didn't change switched_from_dl() because no check is necessary
there at all).

I've looked at this place(switched_to_dl) several times and even fixed
this function, but found just now...  I suppose some performance tests
may work better after this.

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413909356.19914.128.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Update comments for CLONE_NEWNS

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/1412674147-8941-1-git-send-email-chenhanxiao@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: stop the unbound recursion in preempt_schedule_context()

preempt_schedule_context() does preempt_enable_notrace() at the end
and this can call the same function again; exception_exit() is heavy
and it is quite possible that need-resched is true again.

1. Change this code to dec preempt_count() and check need_resched()
   by hand.

2. As Linus suggested, we can use the PREEMPT_ACTIVE bit and avoid
   the enable/disable dance around __schedule(). But in this case
   we need to move into sched/core.c.

3. Cosmetic, but x86 forgets to declare this function. This doesn't
   really matter because it is only called by asm helpers, still it
   make sense to add the declaration into asm/preempt.h to match
   preempt_schedule().

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20141005202322.GB27962@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/fair: Fix division by zero sysctl_numa_balancing_scan_size

File /proc/sys/kernel/numa_balancing_scan_size_mb allows writing of zero.

This bash command reproduces problem:

$ while :; do echo 0 > /proc/sys/kernel/numa_balancing_scan_size_mb; \
   echo 256 > /proc/sys/kernel/numa_balancing_scan_size_mb; done

divide error: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 24112 Comm: bash Not tainted 3.17.0+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88013c852600 ti: ffff880037a68000 task.ti: ffff880037a68000
RIP: 0010:[<ffffffff81074191>]  [<ffffffff81074191>] task_scan_min+0x21/0x50
RSP: 0000:ffff880037a6bce0  EFLAGS: 00010246
RAX: 0000000000000a00 RBX: 00000000000003e8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013c852600
RBP: ffff880037a6bcf0 R08: 0000000000000001 R09: 0000000000015c90
R10: ffff880239bf6c00 R11: 0000000000000016 R12: 0000000000003fff
R13: ffff88013c852600 R14: ffffea0008d1b000 R15: 0000000000000003
FS:  00007f12bb048700(0000) GS:ffff88007da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000001505678 CR3: 0000000234770000 CR4: 00000000000006f0
Stack:
ffff88013c852600 0000000000003fff ffff880037a6bd18 ffffffff810741d1
ffff88013c852600 0000000000003fff 000000000002bfff ffff880037a6bda8
ffffffff81077ef7 ffffea0008a56d40 0000000000000001 0000000000000001
Call Trace:
[<ffffffff810741d1>] task_scan_max+0x11/0x40
[<ffffffff81077ef7>] task_numa_fault+0x1f7/0xae0
[<ffffffff8115a896>] ? migrate_misplaced_page+0x276/0x300
[<ffffffff81134a4d>] handle_mm_fault+0x62d/0xba0
[<ffffffff8103e2f1>] __do_page_fault+0x191/0x510
[<ffffffff81030122>] ? native_smp_send_reschedule+0x42/0x60
[<ffffffff8106dc00>] ? check_preempt_curr+0x80/0xa0
[<ffffffff8107092c>] ? wake_up_new_task+0x11c/0x1a0
[<ffffffff8104887d>] ? do_fork+0x14d/0x340
[<ffffffff811799bb>] ? get_unused_fd_flags+0x2b/0x30
[<ffffffff811799df>] ? __fd_install+0x1f/0x60
[<ffffffff8103e67c>] do_page_fault+0xc/0x10
[<ffffffff8150d322>] page_fault+0x22/0x30
RIP  [<ffffffff81074191>] task_scan_min+0x21/0x50
RSP <ffff880037a6bce0>
---[ end trace 9a826d16936c04de ]---

Also fix race in task_scan_min (it depends on compiler behaviour).

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1413455977.24793.78.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/fair: Care divide error in update_task_scan_period()

While offling node by hot removing memory, the following divide error
occurs:

  divide error: 0000 [#1] SMP
  [...]
  Call Trace:
   [...] handle_mm_fault
   [...] ? try_to_wake_up
   [...] ? wake_up_state
   [...] __do_page_fault
   [...] ? do_futex
   [...] ? put_prev_entity
   [...] ? __switch_to
   [...] do_page_fault
   [...] page_fault
  [...]
  RIP  [<ffffffff810a7081>] task_numa_fault
   RSP <ffff88084eb2bcb0>

The issue occurs as follows:
  1. When page fault occurs and page is allocated from node 1,
     task_struct->numa_faults_buffer_memory[] of node 1 is
     incremented and p->numa_faults_locality[] is also incremented
     as follows:

     o numa_faults_buffer_memory[]       o numa_faults_locality[]
              NR_NUMA_HINT_FAULT_TYPES
             |      0     |     1     |
     ----------------------------------  ----------------------
      node 0 |      0     |     0     |   remote |      0     |
      node 1 |      0     |     1     |   locale |      1     |
     ----------------------------------  ----------------------

  2. node 1 is offlined by hot removing memory.

  3. When page fault occurs, fault_types[] is calculated by using
     p->numa_faults_buffer_memory[] of all online nodes in
     task_numa_placement(). But node 1 was offline by step 2. So
     the fault_types[] is calculated by using only
     p->numa_faults_buffer_memory[] of node 0. So both of fault_types[]
     are set to 0.

  4. The values(0) of fault_types[] pass to update_task_scan_period().

  5. numa_faults_locality[1] is set to 1. So the following division is
     calculated.

        static void update_task_scan_period(struct task_struct *p,
                                unsigned long shared, unsigned long private){
        ...
                ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared));
        }

  6. But both of private and shared are set to 0. So divide error
     occurs here.

The divide error is rare case because the trigger is node offline.
This patch always increments denominator for avoiding divide error.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/54475703.8000505@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/numa: Fix unsafe get_task_struct() in task_numa_assign()

Unlocked access to dst_rq->curr in task_numa_compare() is racy.
If curr task is exiting this may be a reason of use-after-free:

task_numa_compare()                    do_exit()
    ...                                        current->flags |= PF_EXITING;
    ...                                    release_task()
    ...                                        ~~delayed_put_task_struct()~~
    ...                                    schedule()
    rcu_read_lock()                        ...
    cur = ACCESS_ONCE(dst_rq->curr)        ...
        ...                                rq->curr = next;
        ...                                    context_switch()
        ...                                        finish_task_switch()
        ...                                            put_task_struct()
        ...                                                __put_task_struct()
        ...                                                    free_task_struct()
        task_numa_assign()                                     ...
            get_task_struct()                                  ...

As noted by Oleg:

  <<The lockless get_task_struct(tsk) is only safe if tsk == current
    and didn't pass exit_notify(), or if this tsk was found on a rcu
    protected list (say, for_each_process() or find_task_by_vpid()).
    IOW, it is only safe if release_task() was not called before we
    take rcu_read_lock(), in this case we can rely on the fact that
    delayed_put_pid() can not drop the (potentially) last reference
    until rcu_read_unlock().

    And as Kirill pointed out task_numa_compare()->task_numa_assign()
    path does get_task_struct(dst_rq->curr) and this is not safe. The
    task_struct itself can't go away, but rcu_read_lock() can't save
    us from the final put_task_struct() in finish_task_switch(); this
    reference goes away without rcu gp>>

The patch provides simple check of PF_EXITING flag. If it's not set,
this guarantees that call_rcu() of delayed_put_task_struct() callback
hasn't happened yet, so we can safely do get_task_struct() in
task_numa_assign().

Locked dst_rq->lock protects from concurrency with the last schedule().
Reusing or unmapping of cur's memory may happen without it.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1413962231.19914.130.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Fix races between rt_mutex_setprio() and dl_task_timer()

dl_task_timer() is racy against several paths. Daniel noticed that
the replenishment timer may experience a race condition against an
enqueue_dl_entity() called from rt_mutex_setprio(). With his own
words:

rt_mutex_setprio() resets p->dl.dl_throttled. So the pattern is:
start_dl_timer() throttled = 1, rt_mutex_setprio() throlled = 0,
sched_switch() -> enqueue_task(), dl_task_timer-> enqueue_task()
throttled is 0

=> BUG_ON(on_dl_rq(dl_se)) fires as the scheduling entity is already
enqueued on the -deadline runqueue.

As we do for the other races, we just bail out in the replenishment
timer code.

Reported-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: vincent@legout.info
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Fabio Checconi <fchecconi@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414142198-18552-5-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/deadline: Don't replenish from a !SCHED_DEADLINE entity

In the deboost path, right after the dl_boosted flag has been
reset, we can currently end up replenishing using -deadline
parameters of a !SCHED_DEADLINE entity. This of course causes
a bug, as those parameters are empty.

In the case depicted above it is safe to simply bail out, as
the deboosted task is going to be back to its original scheduling
class anyway.

Reported-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: vincent@legout.info
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Fabio Checconi <fchecconi@gmail.com>
Link: http://lkml.kernel.org/r/1414142198-18552-4-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched: Fix race between task_group and sched_task_group

The race may happen when somebody is changing task_group of a forking task.
Child's cgroup is the same as parent's after dup_task_struct() (there just
memory copying). Also, cfs_rq and rt_rq are the same as parent's.

But if parent changes its task_group before it's called cgroup_post_fork(),
we do not reflect this situation on child. Child's cfs_rq and rt_rq remain
the same, while child's task_group changes in cgroup_post_fork().

To fix this we introduce fork() method, which calls sched_move_task() directly.
This function changes sched_task_group on appropriate (also its logic has
no problem with freshly created tasks, so we shouldn't introduce something
special; we are able just to use it).

Possibly, this decides the Burke Libbey's problem: https://lkml.org/lkml/2014/10/24/456

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1414405105.19914.169.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Linux 3.18-rc2

Merge tag 'armsoc-for-rc2' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Another week, another small batch of fixes.

  Most of these make zynq, socfpga and sunxi platforms work a bit
  better:

   - due to new requirements for regulators, DWMMC on socfpga broke past
     v3.17
   - SMP spinup fix for socfpga
   - a few DT fixes for zynq
   - another option (FIXED_REGULATOR) for sunxi is needed that used to
     be selected by other options but no longer is.
   - a couple of small DT fixes for at91
   - ...and a couple for i.MX"

* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
  ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry
  arm: socfpga: fix fetching cpu1start_addr for SMP
  ARM: zynq: DT: trivial: Fix mc node
  ARM: zynq: DT: Add cadence watchdog node
  ARM: zynq: DT: Add missing reference for memory-controller
  ARM: zynq: DT: Add missing reference for ADC
  ARM: zynq: DT: Add missing address for L2 pl310
  ARM: zynq: DT: Remove 222 MHz OPP
  ARM: zynq: DT: Fix GEM register area size

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs updates from Al Viro:
"overlayfs merge + leak fix for d_splice_alias() failure exits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  overlayfs: embed middle into overlay_readdir_data
  overlayfs: embed root into overlay_readdir_data
  overlayfs: make ovl_cache_entry->name an array instead of pointer
  overlayfs: don't hold ->i_mutex over opening the real directory
  fix inode leaks on d_splice_alias() failure exits
  fs: limit filesystem stacking depth
  overlay: overlay filesystem documentation
  overlayfs: implement show_options
  overlayfs: add statfs support
  overlay filesystem
  shmem: support RENAME_WHITEOUT
  ext4: support RENAME_WHITEOUT
  vfs: add RENAME_WHITEOUT
  vfs: add whiteout support
  vfs: export check_sticky()
  vfs: introduce clone_private_mount()
  vfs: export __inode_permission() to modules
  vfs: export do_splice_direct() to modules
  vfs: add i_op->dentry_open()

Merge tag 'imx-fixes-3.18' of git://git./linux/kernel/git/shawnguo/linux into fixes

Merge "ARM: imx: fixes for 3.18" from Shawn Guo:

The i.MX fixes for 3.18:
- Revert one patch which increases I2C bus frequency on imx28-evk
- Fix a typo on imx6q EIM clock name

* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx28-evk: Let i2c0 run at 100kHz
ARM: i.MX6: Fix "emi" clock name typo

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: dts: imx28-evk: Let i2c0 run at 100kHz

Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues
when doing the following sequence in loop:

- Boot the kernel
- Perform audio playback
- Reboot the system via 'reboot' command

In many times the audio card cannot be probed, which causes playback to fail.

After restoring to the original i2c0 frequency of 100kHz there is no such
problem anymore.

This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88.

Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: i.MX6: Fix "emi" clock name typo

Fix a typo error, the "emi" names refer to the eim clocks.

The change fixes typo in EIM and EIM_SLOW pre-output dividers and
selectors clock names. Notably EIM_SLOW clock itself is named correctly.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
[vladimir_zapolskiy@mentor.com: ported to v3.17]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

overlayfs: embed middle into overlay_readdir_data

same story...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

overlayfs: embed root into overlay_readdir_data

no sense having it a pointer - all instances have it pointing to
local variable in the same stack frame

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

overlayfs: make ovl_cache_entry->name an array instead of pointer

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

overlayfs: don't hold ->i_mutex over opening the real directory

just use it to serialize the assignment

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
"This is the first round of fixes and tying up loose ends for MIPS.

   - plenty of fixes for build errors in specific obscure configurations
   - remove redundant code on the Lantiq platform
   - removal of a useless SEAD I2C driver that was causing a build issue
   - fix an earlier TLB exeption handler fix to also work on Octeon.
   - fix ISA level dependencies in FPU emulator's instruction decoding.
   - don't hardcode kernel command line in Octeon software emulator.
   - fix an earlier fix for the Loondson 2 clock setting"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: SEAD3: Fix I2C device registration.
  MIPS: SEAD3: Nuke PIC32 I2C driver.
  MIPS: ftrace: Fix a microMIPS build problem
  MIPS: MSP71xx: Fix build error
  MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
  MIPS: Prevent compiler warning from cop2_{save,restore}
  MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
  MIPS: idle: Remove leftover __pastwait symbol and its references
  MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
  MIPS: ptrace.h: Add a missing include
  MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
  MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
  MIPS: Octeon: Remove special case for simulator command line.
  MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
  MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
  pci: pci-lantiq: remove duplicate check on resource
  MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
  MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- enable 48-bit VA space now that KVM has been fixed, together with a
   couple of fixes for pgd allocation alignment and initial memblock
   current_limit.  There is still a dependency on !ARM_SMMU which needs
   to be updated as it uses the page table manipulation macros of the
   host kernel
- eBPF fixes following changes/conflicts during the merging window
- Compat types affecting compat_elf_prpsinfo
- Compilation error on UP builds
- ASLR fix when /proc/sys/kernel/randomize_va_space == 0
- DT definitions for CLCD support on ARMv8 model platform

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix memblock current_limit with 64K pages and 48-bit VA
  arm64: ASLR: Don't randomise text when randomise_va_space == 0
  arm64: vexpress: Add CLCD support to the ARMv8 model platform
  arm64: Fix compilation error on UP builds
  Documentation/arm64/memory.txt: fix typo
  net: bpf: arm64: minor fix of type in jited
  arm64: bpf: add 'load 64-bit immediate' instruction
  arm64: bpf: add 'shift by register' instructions
  net: bpf: arm64: address randomize and write protect JIT code
  arm64: mm: Correct fixmap pagetable types
  arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
  arm64: Align less than PAGE_SIZE pgds naturally
  arm64: Allow 48-bits VA space without ARM_SMMU

Merge git://git./linux/kernel/git/davem/sparc

Pull two sparc fixes from David Miller:

1) Fix boots with gcc-4.9 compiled sparc64 kernels.

2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on
    futexes used in transparent hugepage areas.

    It's really idiotic to have a weak symbolled fallback that just
    returns zero, and causes this kind of bug.  There should be no
    backup implementation and the link should fail if the architecture
    fails to provide __get_user_pages_fast() and supports transparent
    hugepages.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Implement __get_user_pages_fast().
  sparc64: Fix register corruption in top-most kernel stack frame during boot.

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"This is a pretty large update.  I think it is roughly as big as what I
  usually had for the _whole_ rc period.

  There are a few bad bugs where the guest can OOPS or crash the host.
  We have also started looking at attack models for nested
  virtualization; bugs that usually result in the guest ring 0 crashing
  itself become more worrisome if you have nested virtualization,
  because the nested guest might bring down the non-nested guest as
  well.  For current uses of nested virtualization these do not really
  have a security impact, but you never know and bugs are bugs
  nevertheless.

  A lot of these bugs are in 3.17 too, resulting in a large number of
  stable@ Ccs.  I checked that all the patches apply there with no
  conflicts"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: vfio: fix unregister kvm_device_ops of vfio
  KVM: x86: Wrong assertion on paging_tmpl.h
  kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
  KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag
  KVM: x86: Emulator does not decode clflush well
  KVM: emulate: avoid accessing NULL ctxt->memopp
  KVM: x86: Decoding guest instructions which cross page boundary may fail
  kvm: x86: don't kill guest on unknown exit reason
  kvm: vmx: handle invvpid vm exit gracefully
  KVM: x86: Handle errors when RIP is set during far jumps
  KVM: x86: Emulator fixes for eip canonical checks on near branches
  KVM: x86: Fix wrong masking on relative jump/call
  KVM: x86: Improve thread safety in pit
  KVM: x86: Prevent host from panicking on shared MSR writes.
  KVM: x86: Check non-canonical addresses upon WRMSR

Merge tag 'stable/for-linus-3.18-b-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen bug fixes from David Vrabel:

- Fix regression in xen_clocksource_read() which caused all Xen guests
   to crash early in boot.
- Several fixes for super rare race conditions in the p2m.
- Assorted other minor fixes.

* tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pci: Allocate memory for physdev_pci_device_add's optarr
  x86/xen: panic on bad Xen-provided memory map
  x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read()
  x86/xen: avoid race in p2m handling
  x86/xen: delay construction of mfn_list_list
  x86/xen: avoid writing to freed memory after race in p2m handling
  xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered

Merge tag 'sound-3.18-rc2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Here are a chunk of small fixes since rc1: two PCM core fixes, one is
  a long-standing annoyance about lockdep and another is an ARM64 mmap
  fix.

  The rest are a HD-audio HDMI hotplug notification fix, a fix for
  missing NULL termination in Realtek codec quirks and a few new
  device/codec-specific quirks as usual"

* tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro
  ALSA: pcm: Fix false lockdep warnings
  ALSA: hda - Fix inverted LED gpio setup for Lenovo Ideapad
  ALSA: hda - hdmi: Fix missing ELD change event on plug/unplug
  ALSA: usb-audio: Add support for Steinberg UR22 USB interface
  ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resume
  ALSA: pcm: use the same dma mmap codepath both for arm and arm64

Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull /dev/random updates from Ted Ts'o:
"This adds a memzero_explicit() call which is guaranteed not to be
  optimized away by GCC.  This is important when we are wiping
  cryptographically sensitive material"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  crypto: memzero_explicit - make sure to clear out sensitive data
  random: add and use memzero_explicit() for clearing data

Merge tag 'pm+acpi-3.18-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
"This is material that didn't make it to my 3.18-rc1 pull request for
  various reasons, mostly related to timing and travel (LinuxCon EU /
  LPC) plus a couple of fixes for recent bugs.

  The only really new thing here is the PM QoS class for memory
  bandwidth, but it is simple enough and users of it will be added in
  the next cycle.  One major change in behavior is that platform devices
  enumerated by ACPI will use 32-bit DMA mask by default.  Also included
  is an ACPICA update to a new upstream release, but that's mostly
  cleanups, changes in tools and similar.  The rest is fixes and
  cleanups mostly.

  Specifics:

   - Fix for a recent PCI power management change that overlooked the
     fact that some IRQ chips might not be able to configure PCIe PME
     for system wakeup from Lucas Stach.

   - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is
     called with a wrong ordering of arguments from Zhang Rui.

   - A bunch of intel_pstate driver fixes (all -stable candidates) from
     Dirk Brandewie, Gabriele Mazzotta and Pali Rohár.

   - Fixes for a rather long-standing problem with the OOM killer and
     the freezer that frozen processes killed by the OOM do not actually
     release any memory until they are thawed, so OOM-killing them is
     rather pointless, with a couple of cleanups on top (Michal Hocko,
     Cong Wang, Rafael J Wysocki).

   - ACPICA update to upstream release 20140926, inlcuding mostly
     cleanups reducing differences between the upstream ACPICA and the
     kernel code, tools changes (acpidump, acpiexec) and support for the
     _DDN object (Bob Moore, Lv Zheng).

   - New PM QoS class for memory bandwidth from Tomeu Vizoso.

   - Default 32-bit DMA mask for platform devices enumerated by ACPI
     (this change is mostly needed for some drivers development in
     progress targeted at 3.19) from Heikki Krogerus.

   - ACPI EC driver cleanups, mostly related to debugging, from Lv
     Zheng.

   - cpufreq-dt driver updates from Thomas Petazzoni.

   - powernv cpuidle driver update from Preeti U Murthy"

* tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
  intel_pstate: Correct BYT VID values.
  intel_pstate: Fix BYT frequency reporting
  intel_pstate: Don't lose sysfs settings during cpu offline
  cpufreq: intel_pstate: Reflect current no_turbo state correctly
  cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
  cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
  PCI / PM: handle failure to enable wakeup on PCIe PME
  ACPI: invoke acpi_device_wakeup() with correct parameters
  PM / freezer: Clean up code after recent fixes
  PM: convert do_each_thread to for_each_process_thread
  OOM, PM: OOM killed task shouldn't escape PM suspend
  freezer: remove obsolete comments in __thaw_task()
  freezer: Do not freeze tasks killed by OOM killer
  ACPI / platform: provide default DMA mask
  cpuidle: powernv: Populate cpuidle state details by querying the device-tree
  cpufreq: cpufreq-dt: adjust message related to regulators
  cpufreq: cpufreq-dt: extend with platform_data
  cpufreq: allow driver-specific data
  ACPI / EC: Cleanup coding style.
  ACPI / EC: Refine event/query debugging messages.
  ...

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
"Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...

arm64: Fix memblock current_limit with 64K pages and 48-bit VA

With 48-bit VA space, the 64K page configuration uses 3 levels instead
of 2 and PUD_SIZE != PMD_SIZE. Since with 64K pages we only cover
PMD_SIZE with the initial swapper_pg_dir populated in head.S, the
memblock current_limit needs to be set accordingly in map_mem() to avoid
allocating unmapped memory. The memblock current_limit is progressively
increased as more blocks are mapped.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

sparc64: Implement __get_user_pages_fast().

It is not sufficient to only implement get_user_pages_fast(), you
must also implement the atomic version __get_user_pages_fast()
otherwise you end up using the weak symbol fallback implementation
which simply returns zero.

This is dangerous, because it causes the futex code to loop forever
if transparent hugepages are supported (see get_futex_key()).

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: Fix register corruption in top-most kernel stack frame during boot.

Meelis Roos reported that kernels built with gcc-4.9 do not boot, we
eventually narrowed this down to only impacting machines using
UltraSPARC-III and derivitive cpus.

The crash happens right when the first user process is spawned:

[   54.451346] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[   54.451346]
[   54.571516] CPU: 1 PID: 1 Comm: init Not tainted 3.16.0-rc2-00211-gd7933ab #96
[   54.666431] Call Trace:
[   54.698453]  [0000000000762f8c] panic+0xb0/0x224
[   54.759071]  [000000000045cf68] do_exit+0x948/0x960
[   54.823123]  [000000000042cbc0] fault_in_user_windows+0xe0/0x100
[   54.902036]  [0000000000404ad0] __handle_user_windows+0x0/0x10
[   54.978662] Press Stop-A (L1-A) to return to the boot prom
[   55.050713] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

Further investigation showed that compiling only per_cpu_patch() with
an older compiler fixes the boot.

Detailed analysis showed that the function is not being miscompiled by
gcc-4.9, but it is using a different register allocation ordering.

With the gcc-4.9 compiled function, something during the code patching
causes some of the %i* input registers to get corrupted.  Perhaps
we have a TLB miss path into the firmware that is deep enough to
cause a register window spill and subsequent restore when we get
back from the TLB miss trap.

Let's plug this up by doing two things:

1) Stop using the firmware stack for client interface calls into
   the firmware.  Just use the kernel's stack.

2) As soon as we can, call into a new function "start_early_boot()"
   to put a one-register-window buffer between the firmware's
   deepest stack frame and the top-most initial kernel one.

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

arm64: ASLR: Don't randomise text when randomise_va_space == 0

When user asks to turn off ASLR by writing "0" to
/proc/sys/kernel/randomize_va_space there should not be
any randomization to mmap base, stack, VDSO, libs, text and heap

Currently arm64 violates this behavior by randomising text.
Fix this by defining a constant ELF_ET_DYN_BASE. The randomisation of
mm->mmap_base is done by setup_new_exec -> arch_pick_mmap_layout ->
mmap_base -> mmap_rnd.

Signed-off-by: Arun Chandran <achandran@mvista.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

MIPS: SEAD3: Fix I2C device registration.

This isn't a module and shouldn't be one.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

kvm: vfio: fix unregister kvm_device_ops of vfio

After commit 80ce163 (KVM: VFIO: register kvm_device_ops dynamically),
kvm_device_ops of vfio can be registered dynamically. Commit 3c3c29fd
(kvm-vfio: do not use module_init) move the dynamic register invoked by
kvm_init in order to fix broke unloading of the kvm module. However,
kvm_device_ops of vfio is unregistered after rmmod kvm-intel module
which lead to device type collision detection warning after kvm-intel
module reinsmod.

    WARNING: CPU: 1 PID: 10358 at /root/cathy/kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:3289 kvm_init+0x234/0x282 [kvm]()
    Modules linked in: kvm_intel(O+) kvm(O) nfsv3 nfs_acl auth_rpcgss oid_registry nfsv4 dns_resolver nfs fscache lockd sunrpc pci_stub bridge stp llc autofs4 8021q cpufreq_ondemand ipv6 joydev microcode pcspkr igb i2c_algo_bit ehci_pci ehci_hcd e1000e i2c_i801 ixgbe ptp pps_core hwmon mdio tpm_tis tpm ipmi_si ipmi_msghandler acpi_cpufreq isci libsas scsi_transport_sas button dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kvm_intel]
    CPU: 1 PID: 10358 Comm: insmod Tainted: G        W  O   3.17.0-rc1 #2
    Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
     0000000000000cd9 ffff880ff08cfd18 ffffffff814a61d9 0000000000000cd9
     0000000000000000 ffff880ff08cfd58 ffffffff810417b7 ffff880ff08cfd48
     ffffffffa045bcac ffffffffa049c420 0000000000000040 00000000000000ff
    Call Trace:
     [<ffffffff814a61d9>] dump_stack+0x49/0x60
     [<ffffffff810417b7>] warn_slowpath_common+0x7c/0x96
     [<ffffffffa045bcac>] ? kvm_init+0x234/0x282 [kvm]
     [<ffffffff810417e6>] warn_slowpath_null+0x15/0x17
     [<ffffffffa045bcac>] kvm_init+0x234/0x282 [kvm]
     [<ffffffffa016e995>] vmx_init+0x1bf/0x42a [kvm_intel]
     [<ffffffffa016e7d6>] ? vmx_check_processor_compat+0x64/0x64 [kvm_intel]
     [<ffffffff810002ab>] do_one_initcall+0xe3/0x170
     [<ffffffff811168a9>] ? __vunmap+0xad/0xb8
     [<ffffffff8109c58f>] do_init_module+0x2b/0x174
     [<ffffffff8109d414>] load_module+0x43e/0x569
     [<ffffffff8109c6d8>] ? do_init_module+0x174/0x174
     [<ffffffff8109c75a>] ? copy_module_from_user+0x39/0x82
     [<ffffffff8109b7dd>] ? module_sect_show+0x20/0x20
     [<ffffffff8109d65f>] SyS_init_module+0x54/0x81
     [<ffffffff814a9a12>] system_call_fastpath+0x16/0x1b
    ---[ end trace 0626f4a3ddea56f3 ]---

The bug can be reproduced by:

    rmmod kvm_intel.ko
    insmod kvm_intel.ko

without rmmod/insmod kvm.ko
This patch fixes the bug by unregistering kvm_device_ops of vfio when the
kvm-intel module is removed.

Reported-by: Liu Rongrong <rongrongx.liu@intel.com>
Fixes: 3c3c29fd0d7cddc32862c350d0700ce69953e3bd
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Wrong assertion on paging_tmpl.h

Even after the recent fix, the assertion on paging_tmpl.h is triggered.
Apparently, the assertion wants to check that the PAE is always set on
long-mode, but does it in incorrect way. Note that the assertion is not
enabled unless the code is debugged by defining MMU_DEBUG.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: fix excessive pages un-pinning in kvm_iommu_map error path.

The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.

This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.

This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.

This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.

Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.

Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag

The decode phase of the x86 emulator assumes that every instruction with the
ModRM flag, and which can be used with RIP-relative addressing, has either
SrcMem or DstMem. This is not the case for several instructions - prefetch,
hint-nop and clflush.

Adding SrcMem|NoAccess for prefetch and hint-nop and SrcMem for clflush.

This fixes CVE-2014-8480.

Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Emulator does not decode clflush well

Currently, all group15 instructions are decoded as clflush (e.g., mfence,
xsave). In addition, the clflush instruction requires no prefix (66/f2/f3)
would exist. If prefix exists it may encode a different instruction (e.g.,
clflushopt).

Creating a group for clflush, and different group for each prefix.

This has been the case forever, but the next patch needs the cflush group
in order to fix a bug introduced in 3.17.

Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: emulate: avoid accessing NULL ctxt->memopp

A failure to decode the instruction can cause a NULL pointer access.
This is fixed simply by moving the "done" label as close as possible
to the return.

This fixes CVE-2014-8481.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MIPS: SEAD3: Nuke PIC32 I2C driver.

A platform driver for which nothing ever registers the corresponding
platform device.

Also it was driving the same hardware as sead3-i2c-drv.c so redundant
anyway and couldn't co-exist with that driver because each of them was
using a private spinlock to protect access to the same hardware
resources.

This also fixes a randconfig problem:

arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of
function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration]
ret = i2c_add_numbered_adapter(&priv->adap);
^
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function
'i2c_platform_remove':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration
of function 'i2c_del_adapter' [-Werror=implicit-function-declaration]
i2c_del_adapter(&priv->adap);

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

KVM: x86: Decoding guest instructions which cross page boundary may fail

Once an instruction crosses a page boundary, the size read from the second page
disregards the common case that part of the operand resides on the first page.
As a result, fetch of long insturctions may fail, and thereby cause the
decoding to fail as well.

Cc: stable@vger.kernel.org
Fixes: 5cfc7e0f5e5e1adf998df94f8e36edaf5d30d38e
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86: don't kill guest on unknown exit reason

KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was
triggered by a priveledged application. Let's not kill the guest: WARN
and inject #UD instead.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: vmx: handle invvpid vm exit gracefully

On systems with invvpid instruction support (corresponding bit in
IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid
causes vm exit, which is currently not handled and results in
propagation of unknown exit to userspace.

Fix this by installing an invvpid vm exit handler.

This is CVE-2014-3646.

Cc: stable@vger.kernel.org
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Handle errors when RIP is set during far jumps

Far jmp/call/ret may fault while loading a new RIP.  Currently KVM does not
handle this case, and may result in failed vm-entry once the assignment is
done.  The tricky part of doing so is that loading the new CS affects the
VMCS/VMCB state, so if we fail during loading the new RIP, we are left in
unconsistent state.  Therefore, this patch saves on 64-bit the old CS
descriptor and restores it if loading RIP failed.

This fixes CVE-2014-3647.

Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Emulator fixes for eip canonical checks on near branches

Before changing rip (during jmp, call, ret, etc.) the target should be asserted
to be canonical one, as real CPUs do. During sysret, both target rsp and rip
should be canonical. If any of these values is noncanonical, a #GP exception
should occur. The exception to this rule are syscall and sysenter instructions
in which the assigned rip is checked during the assignment to the relevant
MSRs.

This patch fixes the emulator to behave as real CPUs do for near branches.
Far branches are handled by the next patch.

This fixes CVE-2014-3647.

Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Fix wrong masking on relative jump/call

Relative jumps and calls do the masking according to the operand size, and not
according to the address size as the KVM emulator does today.

This patch fixes KVM behavior.

Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Improve thread safety in pit

There's a race condition in the PIT emulation code in KVM. In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization. If the race condition occurs at the wrong time this
can crash the host kernel.

This fixes CVE-2014-3611.

Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Prevent host from panicking on shared MSR writes.

The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.

Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Check non-canonical addresses upon WRMSR

Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).

Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD. To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.

Some references from Intel and AMD manuals:

According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."

According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."

This patch fixes CVE-2014-3610.

Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro

Without this terminating entry, the pin matching would continue
across random memory until a zero or a non-matching entry was found.

The result being that in some cases, the pin quirk would not be
applied correctly.

Cc: stable@vger.kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next into fixes

Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen:

These patches fixes an SMP and SDMMC driver hang during boot up on the
SOCFPGA platform.

Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP
trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr.

Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order
to allow a standard way of specifying status="okay" in the board DTS file.

Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang
during boot. The reason for the hang was the deferred probe of the SDMMC
driver was waiting for the GPIO resource that would never come.

Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed
regulator node for the SDMMC driver to use.

* tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  arm: socfpga: fix fetching cpu1start_addr for SMP

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-fixes' of git://git./linux/kernel/git/nferre/linux-at91 into fixes

Merge "at91: fixes for v3.18 #1" from Nicholas Ferre:

First AT91 fixes for 3.18:
- one more MAINTAINERS entry for the SSC driver
- a fix for the newly introduced power/reset driver
- a fix on at91sam9263 USB due to PLLB misconfiguration

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx into fixes

Merge "Xilinx Zynq dt fixes for v3.18" from Michal Simek:

arm: Xilinx Zynq DT fixes for v3.18
- Fix gem register size
- Fix OPP
- Add missing references
- Trivial cleanup

* tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: trivial: Fix mc node
  ARM: zynq: DT: Add cadence watchdog node
  ARM: zynq: DT: Add missing reference for memory-controller
  ARM: zynq: DT: Add missing reference for ADC
  ARM: zynq: DT: Add missing address for L2 pl310
  ARM: zynq: DT: Remove 222 MHz OPP
  ARM: zynq: DT: Fix GEM register area size

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP

Allows booting from SD/MMC on RK3288 and other platforms. Added here so I
can enable the board in the boot farm.

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE

I missed in 9a2ad529ed26 that REGULATOR_FIXED_VOLTAGE had also gotten
deselected, so it needs to be added back as an explicit option.

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'overlayfs.v25' of git://git./linux/kernel/git/mszeredi/vfs into for-linus

fix inode leaks on d_splice_alias() failure exits

d_splice_alias() callers expect it to either stash the inode reference
into a new alias, or drop the inode reference.  That makes it possible
to just return d_splice_alias() result from ->lookup() instance, without
any extra housekeeping required.

Unfortunately, that should include the failure exits.  If d_splice_alias()
returns an error, it leaves the dentry it has been given negative and
thus it *must* drop the inode reference.  Easily fixed, but it goes way
back and will need backporting.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>