USB: cdc-acm: fix break reporting

commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream.

A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).

Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: fix racy tty buffer accesses

commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream.

A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.

Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.

Fix this by holding the read lock also when inserting characters from
the bulk endpoint.

Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Partially revert "usb: Kconfig: using select for USB_COMMON dependency"

commit 4d1aa9112c8e6995ef2c8a76972c9671332ccfea upstream.

This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for
USB_LED_TRIG.  This config symbol has bool type and enables extra code
in usb_common itself, not a separate driver.  Enabling it should not
force usb_common to be built-in!

Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/r/20210921143442.340087-1-carnil@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.250

Link: https://lore.kernel.org/r/20211008112714.445637990@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/timerqueue: Rely on rbtree semantics for next timer

commit 511885d7061eda3eb1faf3f57dcc936ff75863f1 upstream.

Simplify the timerqueue code by using cached rbtrees and rely on the tree
leftmost node semantics to get the timer with earliest expiration time.
This is a drop in conversion, and therefore semantics remain untouched.

The runtime overhead of cached rbtrees is be pretty much the same as the
current head->next method, noting that when removing the leftmost node,
a common operation for the timerqueue, the rb_next(leftmost) is O(1) as
well, so the next timer will either be the right node or its parent.
Therefore no extra pointer chasing. Finally, the size of the struct
timerqueue_head remains the same.

Passes several hours of rcutorture.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190724152323.bojciei3muvfxalm@linux-r8p5
Reference: CVE-2021-20317
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

commit 7a8526a5cd51cf5f070310c6c37dd7293334ac49 upstream.

Many users are reporting that the Samsung 860 and 870 SSD are having
various issues when combined with AMD/ATI (vendor ID 0x1002)  SATA
controllers and only completely disabling NCQ helps to avoid these
issues.

Always disabling NCQ for Samsung 860/870 SSDs regardless of the host
SATA adapter vendor will cause I/O performance degradation with well
behaved adapters. To limit the performance impact to ATI adapters,
introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ
only for these adapters.

Also, two libata.force parameters (noncqati and ncqati) are introduced
to disable and enable the NCQ for the system which equipped with ATI
SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ
function to be enabled or disabled according to the demand.

After verifying the chipset from the user reports, the issue appears
on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on
recent AMD SATA adapters. The vendor ID of ATI should be 0x1002.
Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to
ATA_HORKAGE_NO_NCQ_ON_ATI.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Krzysztof Olędzki <ole@ans.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ses: Retry failed Send/Receive Diagnostic commands

[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]

Setting SCSI logging level with error=3, we saw some errors from enclosues:

[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13

Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).

Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: check return value after calling platform_get_resource()

[ Upstream commit 856e6e8e0f9300befa87dde09edb578555c99a82 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: testusb: Fix for showing the connection speed

[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]

testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from  the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade.  The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.

sudo ./testusb -a
high speed      /dev/bus/usb/001/011    0
/dev/bus/usb/001/011 test 0,    0.000015 secs
/dev/bus/usb/001/011 test 1,    0.194208 secs
/dev/bus/usb/001/011 test 2,    0.077289 secs
/dev/bus/usb/001/011 test 3,    0.170604 secs
/dev/bus/usb/001/011 test 4,    0.108335 secs
/dev/bus/usb/001/011 test 5,    2.788076 secs
/dev/bus/usb/001/011 test 6,    2.594610 secs
/dev/bus/usb/001/011 test 7,    2.905459 secs
/dev/bus/usb/001/011 test 8,    2.795193 secs
/dev/bus/usb/001/011 test 9,    8.372651 secs
/dev/bus/usb/001/011 test 10,    6.919731 secs
/dev/bus/usb/001/011 test 11,   16.372687 secs
/dev/bus/usb/001/011 test 12,   16.375233 secs
/dev/bus/usb/001/011 test 13,    2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17,    0.148826 secs
/dev/bus/usb/001/011 test 18,    0.068718 secs
/dev/bus/usb/001/011 test 19,    0.125992 secs
/dev/bus/usb/001/011 test 20,    0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24,    4.133763 secs
/dev/bus/usb/001/011 test 27,    2.140066 secs
/dev/bus/usb/001/011 test 28,    2.120713 secs
/dev/bus/usb/001/011 test 29,    0.507762 secs

Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sd: Free scsi_disk device via put_device()

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]

After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.

Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: fix sleeping in atomic bugs on error

[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]

The ext2_error() function syncs the filesystem so it sleeps.  The caller
is holding a spinlock so it's not allowed to sleep.

   ext2_statfs() <- disables preempt
   -> ext2_count_free_blocks()
      -> ext2_get_group_desc()

Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().

Link: https://lore.kernel.org/r/20210921203233.GA16529@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc64: fix pci_iounmap() when CONFIG_PCI is not set

[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]

Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.

I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]).  But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.

Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/
Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-netback: correct success/error reporting for the SKB-with-fraglist case

[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]

When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: introduce a shutdown method to mdio device drivers

[ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ]

MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.

Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").

So introduce a ->shutdown method in the MDIO device driver structure.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.249

Link: https://lore.kernel.org/r/20211004125031.530773667@linuxfoundation.org
Link: https://lore.kernel.org/r/20211005083258.454981062@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred: allow get_cred() and put_cred() to be given NULL.

commit f06bc03339ad4c1baa964a5f0606247ac1c3c50b upstream.

It is common practice for helpers like this to silently,
accept a NULL pointer.
get_rpccred() and put_rpccred() used by NFS act this way
and using the same interface will ease the conversion
for NFS, and simplify the resulting code.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: usbhid: free raw_report buffers in usbhid_stop

commit f7744fa16b96da57187dc8e5634152d3b63d72de upstream.

Free the unsent raw_report buffers when the device is removed.

Fixes a memory leak reported by syzbot at:
https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47

Reported-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Tested-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: Fix oversized kvmalloc() calls

commit 7bbc3d385bd813077acaf0e6fdb2a86a901f5382 upstream.

The commit

commit 7661809d493b426e979f39ab512e3adf41fbcc69
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Wed Jul 14 09:45:49 2021 -0700

    mm: don't allow oversized kvmalloc() calls

limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the
same limit in ipset.

Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com
Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com
Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: betop: fix slab-out-of-bounds Write in betop_probe

commit 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 upstream.

Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.

So this patch checks hid_device's input is non empty before it's been used.

Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com
Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

commit 505d9dcb0f7ddf9d075e729523a33d38642ae680 upstream.

There are three bugs in this code:

1) If we ccp_init_data() fails for &src then we need to free aad.
   Use goto e_aad instead of goto e_ctx.
2) The label to free the &final_wa was named incorrectly as "e_tag" but
   it should have been "e_final_wa".  One error path leaked &final_wa.
3) The &tag was leaked on one error path.  In that case, I added a free
   before the goto because the resource was local to that block.

Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Allen <john.allen@amd.com>
Tested-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hso: remove the bailout parameter

commit dcb713d53e2eadf42b878c12a471e74dc6ed3145 upstream.

There are two invocation sites of hso_free_net_device. After
refactoring hso_create_net_device, this parameter is useless.
Remove the bailout in the hso_free_net_device and change the invocation
sites of this function.

Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hso: fix error handling code of hso_create_net_device

commit a6ecfb39ba9d7316057cea823b196b734f6b18ca upstream.

The current error handling code of hso_create_net_device is
hso_free_net_device, no matter which errors lead to. For example,
WARNING in hso_free_net_device [1].

Fix this by refactoring the error handling code of
hso_create_net_device by handling different errors by different code.

[1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe

Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com
Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hso: fix bailout in error case of probe

commit 5fcfb6d0bfcda17f0d0656e4e5b3710af2bbaae5 upstream.

The driver tries to reuse code for disconnect in case
of a failed probe.
If resources need to be freed after an error in probe, the
netdev must not be freed because it has never been registered.
Fix it by telling the helper which path we are in.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55

commit c0b15c25d25171db4b70cc0b7dbc1130ee94017d upstream.

The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However
we apply the work around for r0p0 - r1p0. Unfortunately this
won't be fixed for the future revisions for the CPU. Thus
extend the work around for all versions of A55, to cover
for r2p0 and any future revisions.

Cc: stable@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com
[will: Update Kconfig help text]
Signed-off-by: Will Deacon <will@kernel.org>
[Nanyon: adjust for stable version below v4.16, which set TCR_HD earlier
in assembly code]
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream

FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).

Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/
Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9079/1: ftrace: Add MODULE_PLTS support

commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream

Teach ftrace_make_call() and ftrace_make_nop() about PLTs.
Teach PLT code about FTRACE and all its callbacks.
Otherwise the following might happen:

------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c)
[<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24)
[<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8)
[<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcc ]---
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234)
[<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8)
[<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcd ]---
ftrace failed to modify [<e9ef7006>] 0xe9ef7006
actual: 02:f0:3b:fa
ftrace record flags: 0
(0) expected tramp: c0314265

[florian: resolved merge conflict with struct
dyn_arch_ftrace::old_mcount]

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream

Will be used in the following patch. No functional change.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9077/1: PLT: Move struct plt_entries definition to header

commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream

No functional change, later it will be re-used in several files.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/synopsys: Fix wrong value type assignment for edac_mode

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream.

dimm->edac_mode contains values of type enum edac_type - not the
corresponding capability flags. Fix that.

Issue caught by Coverity check "enumerated type mixed with another
type."

 [ bp: Rewrite commit message, add tags. ]

Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: udp: annotate data race around udp_sk(sk)->corkflag

commit a9f5970767d11eadc805d5283f202612c7ba1f59 upstream.

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential infinite loop in ext4_dx_readdir()

commit 42cb447410d024e9d54139ae9c21ea132a8c384c upstream.

When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry.  For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
   leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
   the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
   return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
   != ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
   only fill one dirent because the hash of the entry in block1(besides
   the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
   will fail, and since we has got the one entry, ksys_getdents64 can
   return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: ipoctal: fix module reference leak

commit bb8a4fcb2136508224c596a7e665bdba1d7c3c27 upstream.

A reference to the carrier module was taken on every open but was only
released once when the final reference to the tty struct was dropped.

Fix this by taking the module reference and initialising the tty driver
data when installing the tty.

Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod")
Cc: stable@vger.kernel.org # 3.18
Cc: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: ipoctal: fix missing allocation-failure check

commit 445c8132727728dc297492a7d9fc074af3e94ba3 upstream.

Add the missing error handling when allocating the transmit buffer to
avoid dereferencing a NULL pointer in write() should the allocation
ever fail.

Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: ipoctal: fix tty-registration error handling

commit cd20d59291d1790dc74248476e928f57fc455189 upstream.

Registration of the ipoctal tty devices is unlikely to fail, but if it
ever does, make sure not to deregister a never registered tty device
(and dereference a NULL pointer) when the driver is later unbound.

Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.")
Cc: stable@vger.kernel.org # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: ipoctal: fix tty registration race

commit 65c001df517a7bf9be8621b53d43c89f426ce8d6 upstream.

Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.

Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.")
Cc: stable@vger.kernel.org # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: ipoctal: fix stack information leak

commit a89936cce87d60766a75732a9e7e25c51164f47c upstream.

The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).

Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.

Fixing the ABI is a separate issue, but this at least plugs the security
hole.

Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_unix: fix races in sk_peer_pid and sk_peer_cred accesses

[ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ]

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: csiostor: Add module softdep on cxgb4

[ Upstream commit 79a7482249a7353bc86aff8127954d5febf02472 ]

Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.

When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.

Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.

Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e100: fix buffer overrun in e100_get_regs

[ Upstream commit 51032e6f17ce990d06123ad7307f258c50d25aa7 ]

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e100: fix length calculation in e100_get_regs_len

[ Upstream commit 4329c8dc110b25d5f04ed20c6821bb60deff279f ]

commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902059f ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (tmp421) fix rounding for negative values

[ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ]

Old code produces -24999 for 0b1110011100000000 input in standard format due to
always rounding up rather than "away from zero".

Use the common macro for division, unify and simplify the conversion code along
the way.

Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb

[ Upstream commit f7e745f8e94492a8ac0b0a26e25f2b19d342918f ]

We should always check if skb_header_pointer's return is NULL before
using it, otherwise it may cause null-ptr-deref, as syzbot reported:

  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
  RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline]
  RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196
  Call Trace:
  <IRQ>
   sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109
   ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422
   ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472
   dst_input include/net/dst.h:460 [inline]
   ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize")
Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap

[ Upstream commit 13cb6d826e0ac0d144b0d48191ff1a111d32f0c6 ]

Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:

WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216
RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000
RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100
R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8
R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004
FS:  00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
 ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740
 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089
 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165
 __bpf_tx_skb net/core/filter.c:2114 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2139 [inline]
 __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162
 ____bpf_clone_redirect net/core/filter.c:2429 [inline]
 bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401
 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234
 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline]
 __bpf_prog_run include/linux/filter.h:624 [inline]
 bpf_prog_run include/linux/filter.h:631 [inline]
 bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119
 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663
 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline]
 __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9

Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com
Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix ieee80211_amsdu_aggregate frag_tail bug

[ Upstream commit fe94bac626d9c1c5bc98ab32707be8a9d7f8adba ]

In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the
end of skb_shinfo(head)->frag_list, and use it to bind other skb in
the end of this function. But when execute ieee80211_amsdu_aggregate()
->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of
skb_shinfo(head)->frag_list will be changed. However, the
ieee80211_amsdu_aggregate() not update frag_tail after call
pskb_expand_head(). That will cause the second skb can't bind to the
head skb appropriately.So we update the address of frag_tail to fix it.

Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com
[reword comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: check that ip_vs_conn_tab_bits is between 8 and 20

[ Upstream commit 69e73dbfda14fbfe748d3812da1244cce2928dcb ]

ip_vs_conn_tab_bits may be provided by the user through the
conn_tab_bits module parameter. If this value is greater than 31, or
less than 0, the shift operator used to derive tab_size causes undefined
behaviour.

Fix this checking ip_vs_conn_tab_bits value to be in the range specified
in ipvs Kconfig. If not, simply use default value.

Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix use-after-free in CCMP/GCMP RX

commit 94513069eb549737bcfc3d988d6ed4da948a2de8 upstream.

When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca922a0c ("mac80211: check defrag
PN against current frame").

Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.

Fix this by reloading the variable after the code that results
in the reallocations, if any.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

Cc: stable@vger.kernel.org
Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame")
Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory

[ Upstream commit cdef1196608892b9a46caa5f2b64095a7f0be60c ]

Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.

kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
|  dump_backtrace+0x0/0x380
|  show_stack+0x1c/0x30
|  dump_stack_lvl+0x8c/0xb8
|  print_address_description.constprop.0+0x74/0x2b8
|  kasan_report+0x1f4/0x210
|  kasan_check_range+0xfc/0x1a4
|  __kasan_check_read+0x38/0x60
|  mutex_is_locked+0x20/0x60
|  mutex_destroy+0x80/0x100
|  gov_attr_set_put+0xfc/0x150
|  sugov_exit+0x78/0x190
|  cpufreq_offline.isra.0+0x2c0/0x660
|  cpuhp_cpufreq_offline+0x14/0x24
|  cpuhp_invoke_callback+0x430/0x6d0
|  cpuhp_thread_fun+0x1b0/0x624
|  smpboot_thread_fn+0x5e0/0xa6c
|  kthread+0x3a0/0x450
|  ret_from_fork+0x10/0x20

Swap the order of the calls.

Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: schedutil: Use kobject release() method to free sugov_tunables

[ Upstream commit e5c6b312ce3cc97e90ea159446e6bfa06645364d ]

The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
  WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
  Modules linked in:
  CPU: 3 PID: 720 Comm: a.sh Tainted: G        W         5.14.0-rc1-next-20210715-yocto-standard+ #507
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
  pc : debug_print_object+0xb8/0x100
  lr : debug_print_object+0xb8/0x100
  sp : ffff80001ecaf910
  x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
  x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
  x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
  x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
  x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
  x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
  x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
  x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
  x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
  x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb8/0x100
   __debug_check_no_obj_freed+0x1c0/0x230
   debug_check_no_obj_freed+0x20/0x88
   slab_free_freelist_hook+0x154/0x1c8
   kfree+0x114/0x5d0
   sugov_exit+0xbc/0xc0
   cpufreq_exit_governor+0x44/0x90
   cpufreq_set_policy+0x268/0x4a8
   store_scaling_governor+0xe0/0x128
   store+0xc0/0xf0
   sysfs_kf_write+0x54/0x80
   kernfs_fop_write_iter+0x128/0x1c0
   new_sync_write+0xf0/0x190
   vfs_write+0x2d4/0x478
   ksys_write+0x74/0x100
   __arm64_sys_write+0x24/0x30
   invoke_syscall.constprop.0+0x54/0xe0
   do_el0_svc+0x64/0x158
   el0_svc+0x2c/0xb0
   el0t_64_sync_handler+0xb0/0xb8
   el0t_64_sync+0x198/0x19c
  irq event stamp: 5518
  hardirqs last  enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
  hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
  softirqs last  enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
  softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8

So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely.

Fixes: 9bdcb44e391d ("cpufreq: schedutil: New governor based on scheduler utilization data")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Fix out-of-bound vmalloc access in imageblit

[ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ]

This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.

If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.

To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently.

Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake
Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qnx4: work around gcc false positive warning bug

commit d5f6545934c47e97c0b48a645418e877b452a992 upstream.

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: fix balloon kthread freezing

commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream.

Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a
workqueue") switched the Xen balloon driver to use a kernel thread.
Unfortunately the patch omitted to call try_to_freeze() or to use
wait_event_freezable_timeout(), causing a system suspend to fail.

Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix checking for PIO status

commit fcb461e2bc8b83b7eaca20cb2221e8b940f2189c upstream.

There is an issue that when PCIe switch is connected to an Armada 3700
board, there will be lots of warnings about PIO errors when reading the
config space. According to Aardvark PIO read and write sequence in HW
specification, the current way to check PIO status has the following
issues:

1) For PIO read operation, it reports the error message, which should be
   avoided according to HW specification.

2) For PIO read and write operations, it only checks PIO operation complete
   status, which is not enough, and error status should also be checked.

This patch aligns the code with Aardvark PIO read and write sequence in HW
specification on PIO status check and fix the warnings when reading config
space.

[pali: Fix CRS handling when CRSSVE is not enabled]

Link: https://lore.kernel.org/r/20210722144041.12661-2-pali@kernel.org
Tested-by: Victor Gu <xigu@marvell.com>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # b1bd5714472c ("PCI: aardvark: Indicate error in 'val' when config read fails")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix checking for PIO Non-posted Request

commit 8ceeac307a79f68c0d0c72d6e48b82fa424204ec upstream.

PIO_NON_POSTED_REQ for PIO_STAT register is incorrectly defined. Bit 10 in
register PIO_STAT indicates the response is to a non-posted request.

Link: https://lore.kernel.org/r/20210624213345.3617-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a upstream.

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

    pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
    pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
    pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
    pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
    pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
    pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
    pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: Fix tegra20 build with CONFIG_PM=n

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: 6pack: Fix tx timeout and slot time

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
   unsigned conversion from 'int' to 'unsigned char'
   changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile

[ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Mark __stack_chk_guard as __ro_after_init

[ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Use absolute_pointer() to define PAGE0

[ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qnx4: avoid stringop-overread errors

[ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: avoid stringop-overread errors

[ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: i825xx: Use absolute_pointer for memcpy from fixed memory location

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: Introduce absolute_pointer macro

[ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/balloon: use a kernel thread instead a workqueue

[ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ]

Today the Xen ballooning is done via delayed work in a workqueue. This
might result in workqueue hangups being reported in case of large
amounts of memory are being ballooned in one go (here 16GB):

BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3
    in-flight: 229:balloon_process
    pending: cache_reap
workqueue events_freezable_power_: flags=0x84
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: disk_events_workfn
workqueue mm_percpu_wq: flags=0x8
  pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
    pending: vmstat_update
pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43

This can easily be avoided by using a dedicated kernel thread for doing
the ballooning work.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Double cast io functions to unsigned long

[ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: allow CSR clock of 300MHz

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: fix use after free on rmmod

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ]

plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.

[   31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[   31.275563] Freed by task 306:
[   30.276782]  platform_device_release+0x25/0x80

Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: Fix uaf in blk_trace access after removing by sysfs

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
  blk_trace_remove_queue
    synchronize_rcu
    blk_trace_free
      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
        relay_close_buf
  relay_destroy_buf
    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: fix a lock order reversal in md_alloc

[ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ]

Commit b0140891a8cea3 ("md: Fix race when creating a new md device.")
not only moved assigning mddev->gendisk before calling add_disk, which
fixes the races described in the commit log, but also added a
mddev->open_mutex critical section over add_disk and creation of the
md kobj.  Adding a kobject after add_disk is racy vs deleting the gendisk
right after adding it, but md already prevents against that by holding
a mddev->active reference.

On the other hand taking this lock added a lock order reversal with what
is not disk->open_mutex (used to be bdev->bd_mutex when the commit was
added) for partition devices, which need that lock for the internal open
for the partition scan, and a recent commit also takes it for
non-partitioned devices, leading to further lockdep splatter.

Fixes: b0140891a8ce ("md: Fix race when creating a new md device.")
Fixes: d62633873590 ("block: support delayed holder registration")
Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix potential VPE leak on error

[ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ]

In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.

Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.

Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ]

After printing the list of thermal governors, then this function prints
a newline character.  The problem is that "size" has not been updated
after printing the last governor.  This means that it can write one
character (the NUL terminator) beyond the end of the buffer.

Get rid of the "size" variable and just use "PAGE_SIZE - count" directly.

Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Adjust iface sysfs attr detection

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_en: Don't allow aRFS for encapsulated packets

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ]

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hso: fix muxed tty registration

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: mvebu-uart: fix driver's tx_empty callback

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mcb: fix error handling in mcb_alloc_bus()

commit 25a1433216489de4abc889910f744e952cb6dbae upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback")
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add device id for Foxconn T99W265

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: remove duplicate USB device ID

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Telit LN920 compositions

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: remove duplicated 0xac24 device ID

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream.

Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.

Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: uart: fix tty use after free

commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e15175708 ("greybus: more uart work")
Cc: stable@vger.kernel.org # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/x86: fix PV trap handling on secondary processors

commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix incorrect check for null pointer in header_assemble

commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: fix a loop in set_feature()

commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: drop acl cache for directories too

commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream.

ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock.  It should also drop for
DIRECTORY.  Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.

The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:

  Node 1                    Node 2
  --------------            ----------------
  getfacl dir1

                            getfacl dir1    <-- this is OK

  setfacl -m u:user1:rwX dir1
  getfacl dir1   <-- see the change for user1

                            getfacl dir1    <-- can't see change for user1

Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.248

Link: https://lore.kernel.org/r/20210924124329.173674820@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210925120745.079749171@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ]

The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.

Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().

Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rockchip: Don't modify HW state in .remove() callback

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ]

kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del().  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here
to avoid memory leak, because kobject_init_and_add may return error
without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ]

The kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del.  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to
avoid memory leak, because kobject_init_and_add may return error without
freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix NULL pointer in nilfs_##name##_attr_release

[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ]

In nilfs_##name##_attr_release, kobj->parent should not be referenced
because it is a NULL pointer.  The release() method of kobject is always
called in kobject_put(kobj), in the implementation of kobject_put(), the
kobj->parent will be assigned as NULL before call the release() method.
So just use kobj to get the subgroups, which is more efficient and can fix
a NULL pointer reference problem.

Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_device_group

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL
pointer dereference issue caused by incorrect usage of kboject in nilfs2
sysfs implementation.

This patch (of 6):

Reported by syzkaller:

  BUG: memory leak
  unreferenced object 0xffff888100ca8988 (size 8):
  comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
  hex dump (first 8 bytes):
  6c 6f 6f 70 31 00 ff ff loop1...
  backtrace:
    kstrdup+0x36/0x70 mm/util.c:60
    kstrdup_const+0x35/0x60 mm/util.c:83
    kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
    kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
    kobject_add_varg lib/kobject.c:384 [inline]
    kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
    nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
    init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
    nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
    nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
    legacy_get_tree+0x105/0x210 fs/fs_context.c:592
    vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
    do_new_mount fs/namespace.c:2905 [inline]
    path_mount+0xf9b/0x1990 fs/namespace.c:3235
    do_mount+0xea/0x100 fs/namespace.c:3248
    __do_sys_mount fs/namespace.c:3456 [inline]
    __se_sys_mount fs/namespace.c:3433 [inline]
    __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject
is needed because memory may be allocated in kobject_init_and_add
without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the
memory associated with the kobject.  As the section "Kobject removal" of
"Documentation/core-api/kobject.rst" says, kobject_del() just makes the
kobject "invisible", but it is not cleaned up.  And no more cleanup will
do after cleanup_dev_kobject, so kobject_put is needed here.

Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>