Jarod Wilson [Tue, 5 May 2009 14:00:25 +0000 (10:00 -0400)]
drm/i915: ignore LVDS on intel graphics systems that lie about having it
There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.
Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Jesse Barnes [Tue, 5 May 2009 23:03:48 +0000 (16:03 -0700)]
drm/i915: sanity check IER at wait_request time
We might sleep here anyway so I hope an extra uncached read is ok to
add.
In #20896 we found that vbetool clobbers the IER. In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).
So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered. In a proper config this check
should never be triggered.
This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.
Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost]
Signed-off-by: Eric Anholt <eric@anholt.net>
Shaohua Li [Tue, 7 Apr 2009 03:02:28 +0000 (11:02 +0800)]
drm/i915: workaround IGD i2c bus issue in kernel side (v2)
In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c
access will be wrong.
v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Tue, 12 May 2009 22:27:36 +0000 (15:27 -0700)]
drm/i915: Don't allow binding objects into the last page of the aperture.
This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.
fd.o bug #21488
Signed-off-by: Eric Anholt <eric@anholt.net>
Keith Packard [Thu, 30 Apr 2009 21:43:44 +0000 (14:43 -0700)]
drm/i915: save/restore fence registers across suspend/resume
This makes software fallbacks not do tiling wrong on i965 and later after
resume. It also should fix 945 performance reduction after resume which
would have disabled tiling without causing any visible effect.
Signed-off-by: Keith Packard <keithp@keithp.com>
[anholt: Fixed up the 915 case to not save/restore the new regs]
Signed-off-by: Eric Anholt <eric@anholt.net>
Keith Packard [Thu, 30 Apr 2009 21:43:43 +0000 (14:43 -0700)]
drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
i386 has inline code for writeq and readq, so just use those instead of ugly
macros which evaluate arguments multiple times.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Linus Torvalds [Thu, 30 Apr 2009 04:48:16 +0000 (21:48 -0700)]
Linux 2.6.30-rc4
Linus Torvalds [Thu, 30 Apr 2009 04:25:53 +0000 (21:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Fix min function comparison warning
ecryptfs: fix printk format warning
Linus Torvalds [Thu, 30 Apr 2009 04:25:39 +0000 (21:25 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.
V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM
V4L/DVB (11570): patch: s2255drv: fix race condition on set mode
V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error
V4L/DVB (11561a): move media after i2c
V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free
V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak
V4L/DVB (11494a): cx231xx Kconfig fixes
V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
Devin Heitmueller [Tue, 28 Apr 2009 16:14:07 +0000 (13:14 -0300)]
V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.
A regression was introduced in hg changeset
33810c734a0d, which resulted in
a kernel panic whenever the device was disconnected from USB. The call to
4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so
when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a
pointer to the v4l2_device instead of the au0828_dev structure.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Christopher Pascoe [Mon, 27 Apr 2009 14:27:04 +0000 (11:27 -0300)]
V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
Two fixes for DViCO FusionHDTV DVB-T Dual Express:
* Reset correct tuner when reinitializing xc3028.
* Disable the I2C gate control to avoid locking up the I2C bus.
Tested-by: John Knops <jknops@australiaonline.net.au>
Reviewed-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sascha Hauer [Fri, 24 Apr 2009 15:58:24 +0000 (12:58 -0300)]
V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dean Anderson [Mon, 20 Apr 2009 22:07:44 +0000 (19:07 -0300)]
V4L/DVB (11570): patch: s2255drv: fix race condition on set mode
set_modeready flag must be set before command sent to USB in
s2255_write_config.
Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Fri, 17 Apr 2009 13:56:51 +0000 (10:56 -0300)]
V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error
* Return actual error values as returned by the i2c subsystem, rather
than 0 or 1.
* If the registration of the second bus fails, unregister the first one
before exiting, otherwise we are leaking resources.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Tue, 21 Apr 2009 07:22:38 +0000 (04:22 -0300)]
V4L/DVB (11561a): move media after i2c
Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.
The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 14 Apr 2009 22:51:30 +0000 (19:51 -0300)]
V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free
I lowered the kfree(t) down a couple lines and removed the superflous
"t->vdev = NULL;"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 14 Apr 2009 22:50:33 +0000 (19:50 -0300)]
V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak
I moved the kfree() down a couple lines. t->vdev is going to be in freed
memory so there is no point setting it to NULL. I added a kfree(t) on a
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 14 Apr 2009 16:56:58 +0000 (13:56 -0300)]
V4L/DVB (11494a): cx231xx Kconfig fixes
selecting ALSA module breaks if !SND. Just remove select.
While here, let's fix the whitespacing at the Kconfig.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 14 Apr 2009 00:43:31 +0000 (21:43 -0300)]
V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
A late v4l2_subdev framework change accidentally sent the audio input
routing value to the external multiplexer, instead of the muxer input routing
value to the external multiplexer. This change corrects that error.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Wed, 29 Apr 2009 14:55:45 +0000 (07:55 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
e100: do not go D3 in shutdown unless system is powering off
netfilter: revised locking for x_tables
Bluetooth: Fix connection establishment with low security requirement
Bluetooth: Add different pairing timeout for Legacy Pairing
Bluetooth: Ensure that HCI sysfs add/del is preempt safe
net: Avoid extra wakeups of threads blocked in wait_for_packet()
net: Fix typo in net_device_ops description.
ipv4: Limit size of route cache hash table
Add reference to CAPI 2.0 standard
Documentation/isdn/INTERFACE.CAPI
update Documentation/isdn/00-INDEX
ixgbe: Fix WoL functionality for 82599 KX4 devices
veth: prevent oops caused by netdev destructor
xfrm: wrong hash value for temporary SA
forcedeth: tx timeout fix
net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE
mlx4_en: Handle page allocation failure during receive
mlx4_en: Fix cleanup flow on cq activation
vlan: update vlan carrier state for admin up/down
netfilter: xt_recent: fix stack overread in compat code
...
Thadeu Lima de Souza Cascardo [Wed, 29 Apr 2009 05:42:39 +0000 (22:42 -0700)]
e100: do not go D3 in shutdown unless system is powering off
After experimenting with kexec with the last merges after 2.6.29, I've
had some problems when probing e100. It would not read the eeprom. After
some bisects, I realized this has been like that since forever (at least
2.6.18). The problem is that shutdown is doing the same thing that
suspend does and puts the device in D3 state. I couldn't find a way to
get the device back to a sane state in the probe function. So, based on
some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe,
I wrote this one for e100.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 29 Apr 2009 05:40:49 +0000 (22:40 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6
Stephen Hemminger [Wed, 29 Apr 2009 05:36:33 +0000 (22:36 -0700)]
netfilter: revised locking for x_tables
The x_tables are organized with a table structure and a per-cpu copies
of the counters and rules. On older kernels there was a reader/writer
lock per table which was a performance bottleneck. In 2.6.30-rc, this
was converted to use RCU and the counters/rules which solved the performance
problems for do_table but made replacing rules much slower because of
the necessary RCU grace period.
This version uses a per-cpu set of spinlocks and counters to allow to
table processing to proceed without the cache thrashing of a global
reader lock and keeps the same performance for table updates.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 29 Apr 2009 00:21:20 +0000 (17:21 -0700)]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: fix up error path leak in i915_cmdbuffer
drm/i915: fix unpaired i915 device mutex on entervt failure.
drm/i915: add support for G41 chipset
drm/i915: Enable ASLE if present
drm/i915: Unregister ACPI video driver when exiting
drm/i915: Register ACPI video even when not modesetting
drm/i915: fix transition to I915_TILING_NONE
drm/i915: Don't let an oops get triggered from irq_emit without dma init.
drm/i915: allow tiled front buffers on 965+
Linus Torvalds [Wed, 29 Apr 2009 00:21:07 +0000 (17:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits)
RDMA/nes: Update iw_nes version
RDMA/nes: Fix error path in nes_accept()
RDMA/nes: Fix hang issues for large cluster dynamic connections
RDMA/nes: Increase rexmit timeout interval
RDMA/nes: Check for sequence number wrap-around
RDMA/nes: Do not set apbvt entry for loopback
RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n
RDMA/nes: Fix fw_ver in /sys
RDMA/nes: Set trace length to 1 inch for SFP_D
RDMA/nes: Enable repause timer for port 1
RDMA/nes: Correct CDR loop filter setting for port 1
RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal
RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq()
RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter
mlx4_core: Fix memory leak in mlx4_enable_msi_x()
IB/mthca: Fix timeout for INIT_HCA and a few other commands
RDMA/cxgb3: Don't zero QP attrs when moving to IDLE
RDMA/nes: Fix bugs in nes_reg_phys_mr()
RDMA/nes: Fix compiler warning at nes_verbs.c:1955
IPoIB: Disable NAPI while CQ is being drained
...
Geert Uytterhoeven [Tue, 28 Apr 2009 19:20:11 +0000 (21:20 +0200)]
m68k: arch/m68k/kernel/sun3-head.S needs <linux/init.h>
Fix this:
arch/m68k/kernel/sun3-head.S: Assembler messages:
arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored
Introduced by commit
6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k:
convert to use __HEAD and HEAD_TEXT macros."), which started using
__HEAD without adding the appropriate include.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 28 Apr 2009 23:06:48 +0000 (16:06 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
bio: fix memcpy corruption in bio_copy_user_iov()
hd: fix locking
mg_disk: fix CONFIG_LBD=y warning
mg_disk: fix locking
Linus Torvalds [Tue, 28 Apr 2009 23:06:33 +0000 (16:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: Fix default constraints for fixed voltage regulators
regulator/bq24022: fix bug in is_enabled function
regulator/virtual: fix strings compare predicates
regulator core: fix double-free in regulator_register() error path
drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
unreachable code in drms_uA_update()
regulator: fix header file missing kernel-doc
Roland Dreier [Tue, 28 Apr 2009 23:01:31 +0000 (16:01 -0700)]
Merge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linus
Linus Torvalds [Tue, 28 Apr 2009 22:55:32 +0000 (15:55 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc/ps3: Fix build error on UP
powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB
powerpc: ppc32 needs elf_read_implies_exec()
powerpc/86xx: Add device_type entry to soc for ppc9a
powerpc/44x: Correct memory size calculation for denali-based boards
maintainers: Fix PowerPC 4xx git tree
powerpc: fix for long standing bug noticed by gcc 4.4.0
Revert "powerpc: Add support for early tlbilx opcode"
Tim Abbott [Tue, 28 Apr 2009 15:47:15 +0000 (11:47 -0400)]
powerpc: Revert switch to TEXT_TEXT in linker script
Commit
edada399 broke the build on 64-bit powerpc because it moved the
__ftr_alt_* sections of a file away from the .text section, causing
link failures due to relative conditional branch targets being too far
away from the branch instructions. This happens on pretty much all
64-bit powerpc configs.
This change reverts commit
edada399 while preserving the update from
the *.refok sections to .ref.text that has happened since.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Requested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Tue, 28 Apr 2009 18:24:29 +0000 (20:24 +0200)]
bio: fix memcpy corruption in bio_copy_user_iov()
st driver uses blk_rq_map_user() in order to just build a request out
of page frames. In this case, map_data->offset is a non zero value and
iov[0].iov_base is NULL. We need to increase nr_pages for that.
Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Tue, 28 Apr 2009 03:38:33 +0000 (12:38 +0900)]
hd: fix locking
hd dance around local irq and HD_IRQ enable without achieving much.
It ends up transferring data from irq handler with both local irq and
HD_IRQ disabled. The only place it actually does something is while
transferring the first block of a request which it does with HD_IRQ
disabled but local irq enabled.
Unfortunately, the dancing is horribly broken from locking POV. IRQ
and timeout handlers access block queue without grabbing the queue
lock and running the driver in SMP configuration crashes the whole
machine pretty quickly.
Remove meaningless irq enable/disable dancing and add proper locking
in issue, irq and timeout paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Bartlomiej Zolnierkiewicz [Tue, 28 Apr 2009 03:38:33 +0000 (12:38 +0900)]
mg_disk: fix CONFIG_LBD=y warning
drivers/block/mg_disk.c: In function ‘mg_dump_status’:
drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but
argument 2 has type ‘sector_t’
[ Impact: kill build warning ]
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Tue, 28 Apr 2009 03:38:32 +0000 (12:38 +0900)]
mg_disk: fix locking
IRQ and timeout handlers call functions which expect locked queue lock
without locking it. Fix it.
While at it, convert 0s used as null pointer constant to NULLs.
[ Impact: fix locking, cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Mark Brown [Tue, 28 Apr 2009 10:09:38 +0000 (11:09 +0100)]
regulator: Fix default constraints for fixed voltage regulators
Default voltage constraints were being provided for fixed voltage
regulator where board constraints were not provided but these constraints
used INT_MIN as the default minimum voltage which is not a valid value
since it is less than zero. Use 1uV instead.
Also set the default values we set in the constraints themselves since
otherwise the max_uV constraint we determine will not be stored in the
actual constraint strucutre and will therefore not be used.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Philipp Zabel [Tue, 28 Apr 2009 11:34:14 +0000 (13:34 +0200)]
regulator/bq24022: fix bug in is_enabled function
This seems to be fallout from last October's regulator core rework.
It got noticed only because of recent regulator framework changes.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mike Rapoport [Sun, 26 Apr 2009 08:49:30 +0000 (11:49 +0300)]
regulator/virtual: fix strings compare predicates
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Paul Walmsley [Sat, 25 Apr 2009 11:28:36 +0000 (05:28 -0600)]
regulator core: fix double-free in regulator_register() error path
During regulator registration, any error after device_register() will
cause a double-free on the struct regulator_dev 'rdev'. The bug is in
drivers/regulator/core.c:regulator_register():
...
scrub:
device_unregister(&rdev->dev);
clean:
kfree(rdev); <---
rdev = ERR_PTR(ret);
goto out;
...
device_unregister() calls regulator_dev_release() which frees rdev. The
subsequent kfree corrupts memory and causes some OMAP3 systems to oops on
boot in regulator_get().
Applies against 2.6.30-rc3.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diego Liziero [Tue, 14 Apr 2009 01:04:47 +0000 (03:04 +0200)]
drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
the if should probably return ERR_PTR(-EINVAL)
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
@@ expression E; constant C; @@
(
- !E == C
+ E != C
)
Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Dan Carpenter [Wed, 8 Apr 2009 10:52:39 +0000 (13:52 +0300)]
unreachable code in drms_uA_update()
I removed the extra semi-colon and indented the return statement.
The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git).
The patch was compile tested.
regards,
dan carpenter
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Randy Dunlap [Sat, 4 Apr 2009 04:31:30 +0000 (21:31 -0700)]
regulator: fix header file missing kernel-doc
Add regulator header file missing kernel-doc:
Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Liam Girdwood <lrg@slimlogic.co.uk>
cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Marcel Holtmann [Tue, 28 Apr 2009 16:04:55 +0000 (09:04 -0700)]
Bluetooth: Fix connection establishment with low security requirement
The Bluetooth 2.1 specification introduced four different security modes
that can be mapped using Legacy Pairing and Simple Pairing. With the
usage of Simple Pairing it is required that all connections (except
the ones for SDP) are encrypted. So even the low security requirement
mandates an encrypted connection when using Simple Pairing. When using
Legacy Pairing (for Bluetooth 2.0 devices and older) this is not required
since it causes interoperability issues.
To support this properly the low security requirement translates into
different host controller transactions depending if Simple Pairing is
supported or not. However in case of Simple Pairing the command to
switch on encryption after a successful authentication is not triggered
for the low security mode. This patch fixes this and actually makes
the logic to differentiate between Simple Pairing and Legacy Pairing
a lot simpler.
Based on a report by Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Sun, 26 Apr 2009 18:01:22 +0000 (20:01 +0200)]
Bluetooth: Add different pairing timeout for Legacy Pairing
The Bluetooth stack uses a reference counting for all established ACL
links and if no user (L2CAP connection) is present, the link will be
terminated to save power. The problem part is the dedicated pairing
when using Legacy Pairing (Bluetooth 2.0 and before). At that point
no user is present and pairing attempts will be disconnected within
10 seconds or less. In previous kernel version this was not a problem
since the disconnect timeout wasn't triggered on incoming connections
for the first time. However this caused issues with broken host stacks
that kept the connections around after dedicated pairing. When the
support for Simple Pairing got added, the link establishment procedure
needed to be changed and now causes issues when using Legacy Pairing
When using Simple Pairing it is possible to do a proper reference
counting of ACL link users. With Legacy Pairing this is not possible
since the specification is unclear in some areas and too many broken
Bluetooth devices have already been deployed. So instead of trying to
deal with all the broken devices, a special pairing timeout will be
introduced that increases the timeout to 60 seconds when pairing is
triggered.
If a broken devices now puts the stack into an unforeseen state, the
worst that happens is the disconnect timeout triggers after 120 seconds
instead of 4 seconds. This allows successful pairings with legacy and
broken devices now.
Based on a report by Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Roger Quadros [Thu, 23 Apr 2009 11:50:54 +0000 (14:50 +0300)]
Bluetooth: Ensure that HCI sysfs add/del is preempt safe
Use a different work_struct variables for add_conn() and del_conn() and
use single work queue instead of two for adding and deleting connections.
It eliminates the following error on a preemptible kernel:
[ 204.358032] Unable to handle kernel NULL pointer dereference at virtual address
0000000c
[ 204.370697] pgd =
c0004000
[ 204.373443] [
0000000c] *pgd=
00000000
[ 204.378601] Internal error: Oops: 17 [#1] PREEMPT
[ 204.383361] Modules linked in: vfat fat rfcomm sco l2cap sd_mod scsi_mod iphb pvr2d drm omaplfb ps
[ 204.438537] CPU: 0 Not tainted (2.6.28-maemo2 #1)
[ 204.443664] PC is at klist_put+0x2c/0xb4
[ 204.447601] LR is at klist_put+0x18/0xb4
[ 204.451568] pc : [<
c0270f08>] lr : [<
c0270ef4>] psr:
a0000113
[ 204.451568] sp :
cf1b3f10 ip :
cf1b3f10 fp :
cf1b3f2c
[ 204.463104] r10:
00000000 r9 :
00000000 r8 :
bf08029c
[ 204.468353] r7 :
c7869200 r6 :
cfbe2690 r5 :
c78692c8 r4 :
00000001
[ 204.474945] r3 :
00000001 r2 :
cf1b2000 r1 :
00000001 r0 :
00000000
[ 204.481506] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 204.488861] Control:
10c5387d Table:
887fc018 DAC:
00000017
[ 204.494628] Process btdelconn (pid: 515, stack limit = 0xcf1b22e0)
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Eric Dumazet [Tue, 28 Apr 2009 09:24:21 +0000 (02:24 -0700)]
net: Avoid extra wakeups of threads blocked in wait_for_packet()
In 2.6.25 we added UDP mem accounting.
This unfortunatly added a penalty when a frame is transmitted, since
we have at TX completion time to call sock_wfree() to perform necessary
memory accounting. This calls sock_def_write_space() and utimately
scheduler if any thread is waiting on the socket.
Thread(s) waiting for an incoming frame was scheduled, then had to sleep
again as event was meaningless.
(All threads waiting on a socket are using same sk_sleep anchor)
This adds lot of extra wakeups and increases latencies, as noted
by Christoph Lameter, and slows down softirq handler.
Reference : http://marc.info/?l=linux-netdev&m=
124060437012283&w=2
Fortunatly, Davide Libenzi recently added concept of keyed wakeups
into kernel, and particularly for sockets (see commit
37e5540b3c9d838eb20f2ca8ea2eb8072271e403
epoll keyed wakeups: make sockets use keyed wakeups)
Davide goal was to optimize epoll, but this new wakeup infrastructure
can help non epoll users as well, if they care to setup an appropriate
handler.
This patch introduces new DEFINE_WAIT_FUNC() helper and uses it
in wait_for_packet(), so that only relevant event can wakeup a thread
blocked in this function.
Trace of function calls from bnx2 TX completion bnx2_poll_work() is :
__kfree_skb()
skb_release_head_state()
sock_wfree()
sock_def_write_space()
__wake_up_sync_key()
__wake_up_common()
receiver_wake_function() : Stops here since thread is waiting for an INPUT
Reported-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geoff Levand [Thu, 16 Apr 2009 09:05:37 +0000 (09:05 +0000)]
powerpc/ps3: Fix build error on UP
A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the PS3 smp.c.
Fixes build errors like these when CONFIG_SMP=n:
arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop'
include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Wed, 22 Apr 2009 22:43:03 +0000 (22:43 +0000)]
powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB
Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not
select PCI. This can lead to a config with the former and the latter
disabled, which does not build.
To fix this PPC_CELL_NATIVE should select PCI. However, that would
force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So
instead move the select of PPC_OF_PLATFORM_PCI and PCI under both
IBM_CELL_BLADE and CELLEB.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Kumar Gala [Fri, 17 Apr 2009 08:03:01 +0000 (08:03 +0000)]
powerpc: ppc32 needs elf_read_implies_exec()
On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries
because old toolchains had bugs where they didn't mark program
segments executable that needed to be. For some reason we didn't do
this on ppc32 builds. This hadn't been an issue until commit
8d30c14c
("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side
effect that we are now enforcing execute permissions to some extent on
32-bit 4xx and Book E processors.
This fixes it by defining elf_read_implies_exec on 32-bit to turn on
the read-implies-exec behaviour on programs that are sufficiently old
that they don't have a PT_GNU_STACK program header.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:27 +0000 (14:02 -0400)]
Remove unused support code for refok sections.
The old refok sections
.text.init.refok
.data.init.refok
.exit.text.refok
have been deprecated since commit
312b1485fb509c9bc32eda28ad29537896658cb8. After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:26 +0000 (14:02 -0400)]
sparc: cleanup references to deprecated .text.init* sections.
The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead. This patch cleans up a few
uses of .text.init.refok in the sparc architecture.
Also fix a reference to .text.init in a comment that wasn't updated to
.init.text.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:25 +0000 (14:02 -0400)]
sh: Use __INIT macro instead of .text.init.
The sh architecture has some code in the .text.init section, but it
does not reference that section in its linker scripts.
This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:24 +0000 (14:02 -0400)]
powerpc: Use __REF macro instead of old .text.init.refok.
The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead. This patch cleans up a few
uses of .text.init.refok in the powerpc architecture.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:23 +0000 (14:02 -0400)]
powerpc: Use TEXT_TEXT macro in linker script.
Rather than adding .ref.text to the powerpc linker script so that we
can use __REF on the powerpc architecture, it seems simpler to switch
to using the generic TEXT_TEXT macro.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 18:02:22 +0000 (14:02 -0400)]
arm: Use __INIT macro instead of .text.init.
arm is placing some code in the .text.init section, but it does not
reference that section in its linker scripts.
This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 23:37:58 +0000 (00:37 +0100)]
FRV: Use __INIT macro instead of .text.init.
FRV is placing some code in the .text.init section but does not reference that
section in its linker scripts.
This change moves this code from the .text.init section to the .init.text
section, which is presumably where it belongs.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Abbott [Mon, 27 Apr 2009 23:37:53 +0000 (00:37 +0100)]
FRV: Remove unused header asm/init.h.
It seems nothing has included the frv asm/init.h header for some time, and its
actual contents are out of date with include/linux/init.h. So just delete it.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mackerras [Tue, 28 Apr 2009 00:47:16 +0000 (10:47 +1000)]
Merge branch 'merge' of git://git./linux/kernel/git/jwboyer/powerpc-4xx into merge
Chien Tung [Mon, 27 Apr 2009 20:46:29 +0000 (13:46 -0700)]
RDMA/nes: Update iw_nes version
Update version number to 1.5.0.0
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Faisal Latif [Mon, 27 Apr 2009 20:45:19 +0000 (13:45 -0700)]
RDMA/nes: Fix error path in nes_accept()
If reg_phys_mem() fails, we need to free memory allocated for MPA
frame with private data before returning the error. Also move
nes_add_ref() after the reg_phys_mem() is successful.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Faisal Latif [Mon, 27 Apr 2009 20:41:06 +0000 (13:41 -0700)]
RDMA/nes: Fix hang issues for large cluster dynamic connections
Running large cluster setup, we are hanging after many hours of
testing. Fixing this required going over the code and making sure the
rexmit entry was properly removed based on the cm_node's state and
packet received. Also when receiving a FIN packet, check seq# and
make sure there were no errors before calling handle_fin().
Following are the changes done in nes_cm.c:
* handle_ack_pkt() needs to return error value, so in case of error,
handle_fin() is not called. Some cleanup done while going over the code.
* handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing.
* process_packet(), in case of FIN only packet is received, call
check_seq() before processing.
* in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all
conditions, even if the packets need to be dropped.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Faisal Latif [Mon, 27 Apr 2009 20:39:36 +0000 (13:39 -0700)]
RDMA/nes: Increase rexmit timeout interval
Under heavy load with large cluster testing, it may take longer to
receive a response to MPA requests. Change the driver to wait longer
after each rexmit to max time value.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Faisal Latif [Mon, 27 Apr 2009 20:38:31 +0000 (13:38 -0700)]
RDMA/nes: Check for sequence number wrap-around
check_seq() was not checking if the seq#s have wrapped. Fix it.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Faisal Latif [Mon, 27 Apr 2009 20:37:34 +0000 (13:37 -0700)]
RDMA/nes: Do not set apbvt entry for loopback
When a connect request comes, apbvt should only be set for
non-loopback connections.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:36:03 +0000 (13:36 -0700)]
RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n
Remove the NES_DEBUG that is causing the compile warning about an
unused variable when INFINIBAND_NES_DEBUG is not enabled.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:33:48 +0000 (13:33 -0700)]
RDMA/nes: Fix fw_ver in /sys
/sys/class/infiniband/nes?/fw_ver is not displaying firmware version
properly (it shows 0.0.0 with the current code). Fill in the correct
firmware version number.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:30:35 +0000 (13:30 -0700)]
RDMA/nes: Set trace length to 1 inch for SFP_D
With updated PHY firmware for SFP_D, setting the trace length to 1
inch for SFP_D provides a more stable link.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:29:42 +0000 (13:29 -0700)]
RDMA/nes: Enable repause timer for port 1
Enable repause timer for port 1. Without this setting, under stress,
the chip may misbehave.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:28:41 +0000 (13:28 -0700)]
RDMA/nes: Correct CDR loop filter setting for port 1
In commit
1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is
a mistake in the clean up code that removed port 1 CDR loop filter
settings for 10G cards other than CX4. Put the correct setting back
for appropriate PHY types.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Mon, 27 Apr 2009 20:27:21 +0000 (13:27 -0700)]
RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal
Change thermo mitigation code to flip the SerDes1 reference clock to
internal, to match the change in commit
a4849fc1 ("RDMA/nes: Add
wide_ppm_offset parm for switch compatibility").
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Mon, 27 Apr 2009 19:00:27 +0000 (12:00 -0700)]
Revert "linux.conf.au 2009: Tuz"
This reverts commit
8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1.
Hey, it was only meant to be a single release. Now they can all die as
far as I'm concerned.
[ Just kidding. They're cute and cuddly.
Except when they have horrible nasty facial diseases. Oh, and I guess
they're not actually that cuddly even when disease-free. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 27 Apr 2009 18:59:46 +0000 (11:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: only save/restore existent registers in the PCIe capability
x86/PCI: don't bother with root quirks if _CRS is used
docbooks: add/fix PCI kernel-doc
PCI: cleanup debug output resources
x86/PCI: set_pci_bus_resources_arch_default cleanups
x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case
PCI quirk: disable MSI on VIA VT3364 chipsets
Tyler Hicks [Mon, 27 Apr 2009 18:31:12 +0000 (13:31 -0500)]
eCryptfs: Fix min function comparison warning
This warning shows up on 64 bit builds:
fs/ecryptfs/inode.c:693: warning: comparison of distinct pointer types
lacks a cast
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Linus Torvalds [Mon, 27 Apr 2009 18:16:33 +0000 (11:16 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: look for acls during btrfs_read_locked_inode
Btrfs: fix acl caching
Btrfs: Fix a bunch of printk() warnings.
Btrfs: Fix a trivial warning using max() of u64 vs ULL.
Btrfs: remove unused btrfs_bit_radix slab
Btrfs: ratelimit IO error printks
Btrfs: remove #if 0 code
Btrfs: When shrinking, only update disk size on success
Btrfs: fix deadlocks and stalls on dead root removal
Btrfs: fix fallocate deadlock on inode extent lock
Btrfs: kill btrfs_cache_create
Btrfs: don't export symbols
Btrfs: simplify makefile
Btrfs: try to keep a healthy ratio of metadata vs data block groups
Randy Dunlap [Tue, 28 Apr 2009 04:24:28 +0000 (21:24 -0700)]
ecryptfs: fix printk format warning
fs/ecryptfs/inode.c:670: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Martyn Welch [Mon, 27 Apr 2009 16:24:28 +0000 (17:24 +0100)]
powerpc/86xx: Add device_type entry to soc for ppc9a
The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Chris Mason [Mon, 27 Apr 2009 15:47:50 +0000 (11:47 -0400)]
Btrfs: look for acls during btrfs_read_locked_inode
This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items.
If it is certain a given inode has no acls, it will set the in memory acl
fields to null to avoid acl lookups completely.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 27 Apr 2009 14:49:53 +0000 (10:49 -0400)]
Btrfs: fix acl caching
Linus noticed the btrfs code to cache acls wasn't properly caching
a NULL acl when the inode didn't have any acls. This meant the common
case of no acls resulted in expensive btree searches every time the
kernel checked permissions (which is quite often).
This is a modified version of Linus' original patch:
Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode.
This forces an acl lookup when permission checks are done.
Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields
are set to null.
Fix btrfs_get_acl to use the right return value from __btrfs_getxattr
when deciding to cache a NULL acl. It was storing a NULL acl when
__btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning
-ENODATA for this case.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Mon, 27 Apr 2009 15:54:43 +0000 (08:54 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Fix Trivial Warnining in sound/pci/cmipci.c
ALSA: snd-usb-caiaq: fix reported elapsed periods
ASoC: s3c-i2s-v2 needs to declare a license for modular builds
ALSA: hda - Fix init verbs of
AD1884A mobile model
ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991
ASoC: Fix WM8580 volume update handling for large register changes
ASoC: Fix offset of freqmode in WM8580 PLL configuration
Linus Torvalds [Mon, 27 Apr 2009 15:40:00 +0000 (08:40 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-quota-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
ext2: missing unlock in ext2_quota_write()
quota: remove obsolete comments in fs/quota/Makefile
Linus Torvalds [Mon, 27 Apr 2009 15:39:02 +0000 (08:39 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Do not try to validate extents on special files
ext4: Ignore i_file_acl_high unless EXT4_FEATURE_INCOMPAT_64BIT is present
ext4: Fix softlockup caused by illegal i_file_acl value in on-disk inode
Linus Torvalds [Mon, 27 Apr 2009 15:38:51 +0000 (08:38 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
ptrace: ptrace_attach: fix the usage of ->cred_exec_mutex
Linus Torvalds [Mon, 27 Apr 2009 15:38:15 +0000 (08:38 -0700)]
Merge branch 'sh/for-2.6.30' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix up unsigned syscall_nr in SH-5 pt_regs.
maple: input: fix up maple mouse driver
sh: sh7785lcr: fix defconfig for 29-bit mode
Takashi Iwai [Mon, 27 Apr 2009 15:15:44 +0000 (17:15 +0200)]
Merge branch 'fix/misc' into for-linus
* fix/misc:
ALSA: Fix Trivial Warnining in sound/pci/cmipci.c
Takashi Iwai [Mon, 27 Apr 2009 15:15:41 +0000 (17:15 +0200)]
Merge branch 'fix/caiaq' into for-linus
* fix/caiaq:
ALSA: snd-usb-caiaq: fix reported elapsed periods
Takashi Iwai [Mon, 27 Apr 2009 15:15:35 +0000 (17:15 +0200)]
Merge branch 'fix/hda' into for-linus
* fix/hda:
ALSA: hda - Fix init verbs of
AD1884A mobile model
Takashi Iwai [Mon, 27 Apr 2009 15:15:32 +0000 (17:15 +0200)]
Merge branch 'fix/asoc' into for-linus
* fix/asoc:
ASoC: s3c-i2s-v2 needs to declare a license for modular builds
ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991
ASoC: Fix WM8580 volume update handling for large register changes
ASoC: Fix offset of freqmode in WM8580 PLL configuration
David Howells [Mon, 27 Apr 2009 10:55:23 +0000 (11:55 +0100)]
FRV: Stop gcc from generating uninitialised variable warnings after BUG()
Stop gcc from generating uninitialised variable warnings after BUG().
The problem is that FRV's call into its gdbstub appears to return (if
the function is marked noreturn, then the compiler is under no
obligation to pass it a return address, and so GDB won't know where the
bug happened).
To get around this, we make the do...while wrapper in _debug_bug_trap()
an endless loop from which there's no escape.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 27 Apr 2009 10:55:17 +0000 (11:55 +0100)]
FRV: Wire up new syscalls
Wire up new system calls for the FRV arch (preadv and pwritev).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Thu, 9 Apr 2009 16:07:10 +0000 (18:07 +0200)]
ext2: missing unlock in ext2_quota_write()
The inode->i_mutex should be unlocked.
Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Christoph Hellwig [Tue, 7 Apr 2009 16:10:06 +0000 (18:10 +0200)]
quota: remove obsolete comments in fs/quota/Makefile
Get rid of useless comments and the equally useless obj-y
initialization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Mike Rapoport [Mon, 27 Apr 2009 12:45:54 +0000 (05:45 -0700)]
net: Fix typo in net_device_ops description.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Mon, 27 Apr 2009 12:42:24 +0000 (05:42 -0700)]
ipv4: Limit size of route cache hash table
Right now we have no upper limit on the size of the route cache hash table.
On a 128GB POWER6 box it ends up as 32MB:
IP route cache hash table entries:
4194304 (order: 9,
33554432 bytes)
It would be nice to cap this for memory consumption reasons, but a massive
hashtable also causes a significant spike when measuring OS jitter.
With a 32MB hashtable and 4 million entries, rt_worker_func is taking
5 ms to complete. On another system with more memory it's taking 14 ms.
Even though rt_worker_func does call cond_sched() to limit its impact,
in an HPC environment we want to keep all sources of OS jitter to a minimum.
With the patch applied we limit the number of entries to 512k which
can still be overriden by using the rt_entries boot option:
IP route cache hash table entries: 524288 (order: 6,
4194304 bytes)
With this patch rt_worker_func now takes 0.460 ms on the same system.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joel Becker [Tue, 21 Apr 2009 19:38:29 +0000 (12:38 -0700)]
Btrfs: Fix a bunch of printk() warnings.
Just happened to notice a bunch of %llu vs u64 warnings. Here's a patch
to cast them all.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Joel Becker [Tue, 21 Apr 2009 19:38:30 +0000 (12:38 -0700)]
Btrfs: Fix a trivial warning using max() of u64 vs ULL.
A small warning popped up on ia64 because inode-map.c was comparing a
u64 object id with the ULL FIRST_FREE_OBJECTID. My first thought was
that all the OBJECTID constants should contain the u64 cast because
btrfs code deals entirely in u64s. But then I saw how large that was,
and figured I'd just fix the max() call.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Mon, 27 Apr 2009 11:49:10 +0000 (07:49 -0400)]
Btrfs: remove unused btrfs_bit_radix slab
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Karsten Keil [Thu, 23 Apr 2009 02:24:21 +0000 (02:24 +0000)]
Add reference to CAPI 2.0 standard
Move the entry about CAPI 2.0 to the beginning and add a URL.
Incorporate changes suggested by Randy Dunlap, thanks for proofreading.
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tilman Schmidt [Thu, 23 Apr 2009 02:24:21 +0000 (02:24 +0000)]
Documentation/isdn/INTERFACE.CAPI
isdn: document Kernel CAPI driver interface
Create a file Documentation/isdn/INTERFACE.CAPI describing the
interface between the kernel CAPI subsystem and ISDN device drivers,
analogous to the existing Documentation/isdn/INTERFACE for the old
isdn4linux subsystem. Also add kerneldoc comments to the exported
functions in drivers/isdn/capi/kcapi.c.
Impact: Documentation
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tilman Schmidt [Thu, 23 Apr 2009 02:24:21 +0000 (02:24 +0000)]
update Documentation/isdn/00-INDEX
After the merging of mISDN, state which files refer only to the
old isdn4linux subsystem. Also add a few missing files.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subrata Modak [Mon, 27 Apr 2009 11:12:37 +0000 (16:42 +0530)]
ALSA: Fix Trivial Warnining in sound/pci/cmipci.c
Fixed the compile warning below by initializatin iomidi variable properly.
sound/pci/cmipci.c: In function ‘snd_cmipci_probe’:
sound/pci/cmipci.c:3017: warning: ‘iomidi’ may be used uninitialized in this function
Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: linux-pci <linux-pci@atrey.karlin.mff.cuni.cz>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log