rtc: rtc-mv: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-max8997: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-max8907: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-max77686: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler. Also, this patch uses devm_request_threaded_irq().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-lpc32xx: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-lp8788: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-imxdi: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ep93xx: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ds1742: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ds1553: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ds1511: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-davinci: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-da9055: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-da9052: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-coh90133: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-88pm80x: use devm_rtc_device_register()

devm_rtc_device_register() is device managed and makes cleanup
paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-tx4939: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-tegra: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-sun4v: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-starfire: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-sh: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-rp5c01: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-pxa: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ps3: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-pcap: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-omap: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-nuc900: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-mv: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-msm6242: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-mc13xxx: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-imxdi: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-generic: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-efi: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ds1302: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-davinci: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-coh901331: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-au1xxx: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-at91rm9200: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-at32ap700x: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ab3100: use module_platform_driver_probe()

Use module_platform_driver_probe() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/class.c: use struct device as the first argument for devm_rtc_device_register()

Other devm_* APIs use 'struct device *dev' as the first argument.  Thus,
in order to sync with other devm_* functions, struct device is used as
the first argument for devm_rtc_device_register().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: use dev_info()/dev_emerg() instead of pr_info()/pr_emerg()

dev_info()/dev_emerg() are preferred to pr_info()/pr_emerg().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: fix indentation of bit definitions

Fix indentation of bit definitions to enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: use devm_kzalloc()

Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: add missing module author name

Add missing module author name to MODULE_AUTHOR macro.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: use module_platform_driver()

Use module_platform_driver() macro which makes the code smaller and
simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add devm_rtc_device_{register,unregister}()

These functions allow the driver core to automatically clean up any
allocation made by rtc drivers.  Thus it simplifies the error paths.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-tegra: add __init/__exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-pcap: add __init/__exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-nuc900: add __init/__exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-imxdi: add __init/__exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-ds1302: add __exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-davinci: add __exit annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-mv: add __init annotation

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: convert to pr_foo()

Also enables cleanup of some 80-col trickery.

Cc: Richard Weinberger <richard@nod.at>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init: raise log level

If the kernel was booted with the "quiet" boot option we have currently no
chance to see why an initrd fails.  Change KERN_WARNING to KERN_ERR to see
what is going on.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init: scream bloody murder if interrupts are enabled too early

As I was testing a lot of my code recently, and having several
"successes", I accidentally noticed in the dmesg this little line:

  start_kernel(): bug: interrupts were enabled *very* early, fixing it

Sure enough, one of my patches two commits ago enabled interrupts early.
The sad part here is that I never noticed it, and I ran several tests with
ktest too, and ktest did not notice this line.

What ktest looks for (and so does many other automated testing scripts) is
a back trace produced by a WARN_ON() or BUG().  As a back trace was never
produced, my buggy patch could have slipped into linux-next, or even
worse, mainline.

Adding a WARN(!irqs_disabled()) makes this bug a little more obvious:

  PID hash table entries: 4096 (order: 3, 32768 bytes)
  __ex_table already sorted, skipping sort
  Checking aperture...
  No AGP bridge found
  Calgary: detecting Calgary via BIOS EBDA area
  Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  Memory: 2003252k/2054848k available (4857k kernel code, 460k absent, 51136k reserved, 6210k data, 1096k init)
  ------------[ cut here ]------------
  WARNING: at /home/rostedt/work/git/linux-trace.git/init/main.c:543 start_kernel+0x21e/0x415()
  Hardware name: To Be Filled By O.E.M.
  Interrupts were enabled *very* early, fixing it
  Modules linked in:
  Pid: 0, comm: swapper/0 Not tainted 3.8.0-test+ #286
  Call Trace:
    warn_slowpath_common+0x83/0x9b
    warn_slowpath_fmt+0x46/0x48
    start_kernel+0x21e/0x415
    x86_64_start_reservations+0x10e/0x112
    x86_64_start_kernel+0x102/0x111
  ---[ end trace 007d8b0491b4f5d8 ]---
  Preemptible hierarchical RCU implementation.
   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  NR_IRQS:4352 nr_irqs:712 16
  Console: colour VGA+ 80x25
  console [ttyS0] enabled, bootconsole disabled

Do you see it?

The original version of this patch just slapped a WARN_ON() in there and
kept the printk().  Ard van Breemen suggested using the WARN() interface,
which makes the code a bit cleaner.

Also, while examining other warnings in init/main.c, I found two other
locations that deserve a bloody murder scream if their conditions are hit,
and updated them accordingly.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ard van Breemen <ard@telegraafnet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add Suggested-by as a standard signature

As people started using Suggested-by as standard signature, adding
"Suggested-by" to the standard signature so that checkpatch won't
generate warning when Suggested-by is used in patch signature

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: only warn for empty lines before closing braces by themselves

This check was intended to catch extra newlines at the end of a function
definition, but it would trigger on any closing brace, including those
of inline functions and macro definitions, triggering false positives.
Now, only closing braces on a line by themselves trigger this check.

Tested with:

$ cat test.h
/* test.h - Test file */

static inline int foo(void) { return 0; }

static inline int bar(void)
{
        return 1;

}

$ ./scripts/checkpatch.pl --strict -f test.h # Before this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+static inline int foo(void) { return 0; }

CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 2 checks, 9 lines checked

$ ./scripts/checkpatch.pl --strict -f test.h # After this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 1 checks, 9 lines checked

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on space before semicolon

Make space before semicolon a warning instead of a --strict CHK test.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: complain about executable files

Complain about files with an executable bit set that are not in a scripts/
directory and are not type .pl, .py, .awk, or .sh

Based on an initial patch from Stephen.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: Prefer seq_puts to seq_printf

Add a check for seq_printf use with a constant format without additional
arguments.  Suggest seq_puts instead.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add check for reuse of krealloc arg

On Thu, 2013-03-14 at 13:30 +0000, David Woodhouse wrote:
> If krealloc() returns NULL, it *doesn't* free the original. So any code
> of the form 'foo = krealloc(foo, …);' is almost certainly a bug.

So add a check for it to checkpatch.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib, net: make isodigit() public and use it

There are at least two users of isodigit().  Let's make it a public
function of ctype.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

argv_split(): teach it to handle mutable strings

argv_split() allocates argv[count_argc(str)] array and assumes that it
will find the same number of arguments later.  This is obviously wrong if
this string can be changed, say, by sysctl.

With this patch argv_split() kstrndup's the whole string and does not
split it, we simply replace the spaces with zeroes and keep the allocated
memory in argv[-1] for argv_free(arg).

We do not use argv[0] because:

- str can be all-spaces or empty. In fact this case is fine,
  we could kfree() it before return, but:

- str can have a space at the start, and we can not rely on
  kstrndup(skip_spaces(str)) because it can equally race if
  this string is mutable.

Also, simplify count_argc() and kill the no longer used skip_arg().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/int_sqrt.c: optimize square root algorithm

Optimize the current version of the shift-and-subtract (hardware)
algorithm, described by John von Newmann[1] and Guy L Steele.

Iterating 1,000,000 times, perf shows for the current version:

 Performance counter stats for './sqrt-curr' (10 runs):

         27.170996 task-clock                #    0.979 CPUs utilized            ( +-  3.19% )
                 3 context-switches          #    0.103 K/sec                    ( +-  4.76% )
                 0 cpu-migrations            #    0.004 K/sec                    ( +-100.00% )
               104 page-faults               #    0.004 M/sec                    ( +-  0.16% )
        64,921,199 cycles                    #    2.389 GHz                      ( +-  0.03% )
        28,967,789 stalled-cycles-frontend   #   44.62% frontend cycles idle     ( +-  0.18% )
   <not supported> stalled-cycles-backend
       104,502,623 instructions              #    1.61  insns per cycle
                                             #    0.28  stalled cycles per insn  ( +-  0.00% )
        34,088,368 branches                  # 1254.587 M/sec                    ( +-  0.00% )
             4,901 branch-misses             #    0.01% of all branches          ( +-  1.32% )

       0.027763015 seconds time elapsed                                          ( +-  3.22% )

And for the new version:

Performance counter stats for './sqrt-new' (10 runs):

          0.496869 task-clock                #    0.519 CPUs utilized            ( +-  2.38% )
                 0 context-switches          #    0.000 K/sec
                 0 cpu-migrations            #    0.403 K/sec                    ( +-100.00% )
               104 page-faults               #    0.209 M/sec                    ( +-  0.15% )
           590,760 cycles                    #    1.189 GHz                      ( +-  2.35% )
           395,053 stalled-cycles-frontend   #   66.87% frontend cycles idle     ( +-  3.67% )
   <not supported> stalled-cycles-backend
           398,963 instructions              #    0.68  insns per cycle
                                             #    0.99  stalled cycles per insn  ( +-  0.39% )
            70,228 branches                  #  141.341 M/sec                    ( +-  0.36% )
             3,364 branch-misses             #    4.79% of all branches          ( +-  5.45% )

       0.000957440 seconds time elapsed                                          ( +-  2.42% )

Furthermore, this saves space in instruction text:

   text    data     bss     dec     hex filename
    111       0       0     111      6f lib/int_sqrt-baseline.o
     89       0       0      89      59 lib/int_sqrt.o

[1] http://en.wikipedia.org/wiki/First_Draft_of_a_Report_on_the_EDVAC

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Reviewed-by: Jonathan Gonzalez <jgonzlez@linets.cl>
Tested-by: Jonathan Gonzalez <jgonzlez@linets.cl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/tps65217_bl.c add default brightness value option

Signed-off-by: Matus Ujhelyi <matus.ujhelyi@streamunlimited.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: add missing documentation for tps65217-bl device tree binding

Signed-off-by: Matus Ujhelyi <matus.ujhelyi@streamunlimited.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: add a device tree structure

Enable supporting the DT structure of LP855x family devices.  If the
platform data is NULL, the driver tries to parse a DT structure.  Then,
the platform data is copied from the DT.  Documentation is added as well.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: remove duplicate platform data

The 'load_new_rom_data' was used for checking whether new ROM data should
be updated or not.

However, we can decide it with 'size_program' data.  If the size is
greater than 0, it means updating ROM area is required.  Otherwise, the
default ROM data will be used.  Therefore, this duplicate platform data
can be removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: fix initial brightness type

Valid range of the brightness is from 0 to 255, so initial brightness
is changed from integer to u8.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: move backlight mode platform data

The brightness of LP855x devices is controlled by I2C register or PWM
input .  This mode was selected through the platform data, but it can be
chosen by the driver internally without platform data configuration.

How to decide the control mode:
  If the PWM period has specific value, the mode is PWM input.
  On the other hand, the mode is register-based.
  This mode selection is done on the _probe().

Move 'mode' from a header file to the driver private data structure,
'lp855 x'.  And correlated code was replaced.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lp855x: convert a type of device name

Configurable data, backlight device name is set to constant character type.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: vgg2432a4: convert vgg2432a4_driver to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management. Also, use of
pm_message_t is deprecated. Thus, it is removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tosa: convert tosa to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: omap1: convert omapbl to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/platform_lcd.c: introduce probe callback

Platform LCD devices may need to do some device-specific initialization
before they can be used (regulator or GPIO setup, for example), but
currently the driver does not support any way of doing this.  This patch
adds a probe() callback to plat_lcd_data which platform LCD devices can
set to indicate that device-specific initialization is needed.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ili922x: use spi_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ili9320: use spi_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/as3711_bl.c: add OF support

Add support for configuring AS3711 backlight driver from DT.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp8870_bl.c: fix error return code in adp8870_led_probe()

Fix to return a negative error code from the error handling case instead
of zero, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp8860_bl.c: fix error return code in adp8860_led_probe()

Fix to return a negative error code from the error handling case instead
of zero, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/lp855x_bl.c: use PAGE_SIZE for the sysfs read operation

sysfs allocates PAGE_SIZE.  It is used by each R/W operation method.  Use
it instead of another buffer size.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: da903x_bl: use BL_CORE_SUSPENDRESUME option

Use BL_CORE_SUSPENDRESUME option to support suspend/resume.  It reduces
code size.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video: backlight: add ili922x lcd driver

Add LCD driver for Ilitek ILI9221/ILI9222 controller.  The driver uses
SPI interface for controller access and configuration and RGB interface
for graphics data transfer.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp5520_bl.c: fix compiler warning in adp5520_show()

While compiling with make W=1 (gcc gcc (GCC) 4.7.2 20121109 (Red Hat
4.7.2-8)) the following warning happens:

  drivers/video/backlight/adp5520_bl.c: In function `adp5520_show':
  drivers/video/backlight/adp5520_bl.c:146:6: warning: variable `error' set but not used [-Wunused-but-set-variable]

fixed by checking the return value of the variable

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/Kconfig: fix typo "MACH_SAM9...EK" three times

Fix three typos (originally) introduced by commit a9a84c37d1ee
("atmel_lcdfb: backlight control").

Two of these typos were introduced in v2.6.25.  (The third was
introduced in 915190f7d4f0 ("[ARM] 5614/1: at91: atmel_lcdfb: add
at91sam9g10 support to atmel LCD driver")).  Checking these commits
reveals that the default value of 'y' has never been set automatically
in all releases since v2.6.25! Perhaps this line might as well be
dropped.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tdo24m: convert tdo24m to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ltv350qv: convert ltv350qv to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: locomolcd: convert locomolcd to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lm3533_bl: convert lm3533_bl to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: kb3886_bl: convert kb3886bl to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: hp680_bl: convert hp680bl to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ep93xx: convert ep93xx to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: corgi_lcd: convert corgi_lcd to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: adp8870: convert adp8870 to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: adp8860: convert adp8860 to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: adp5520: convert adp5520_bl to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: s6e63m0: convert s6e63m0 to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lms501kf03: convert lms501kf03 to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>