kgdb: fix gcc-11 warning on indentation

commit 40cc3a80bb42587db1e6ae21d6f3090582d33e89 upstream.

gcc-11 starts warning about misleading indentation inside of macros:

drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’:
drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
  103 |         if (verbose > 1) \
      |         ^~
drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’
  200 |         v2printk("kgdbts: breakpoint complete\n");
      |         ^~~~~~~~
drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
  105 |                 touch_nmi_watchdog();   \
      |                 ^~~~~~~~~~~~~~~~~~

The code looks correct to me, so just reindent it for readability.

Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164308.827846-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: adc-jack: Fix incompatible pointer type warning

commit 8a522bf2d4f788306443d36b26b54f0aedcdfdbe upstream.

This patch fixes the incompatible warning of extcon-adc-jack.c driver
when calling devm_extcon_dev_allocate().

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
[cw00.choi: Modify the patch title and descritpion]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes

commit 396a66aa1172ef2b78c21651f59b40b87b2e5e1e upstream.

gcc-11 warns about mismatched prototypes here:

  arch/x86/lib/msr-smp.c:255:51: error: argument 2 of type ‘u32 *’ {aka ‘unsigned int *’} declared as a pointer [-Werror=array-parameter=]
    255 | int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
        |                                              ~~~~~^~~~
  arch/x86/include/asm/msr.h:347:50: note: previously declared as an array ‘u32[8]’ {aka ‘unsigned int[8]’}

GCC is right here - fix up the types.

[ mingo: Twiddled the changelog. ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210322164541.912261-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: exynos7: Mark aclk_fsys1_200 as critical

commit 34138a59b92c1a30649a18ec442d2e61f3bc34dd upstream.

This clock must be always enabled to allow access to any registers in
fsys1 CMU. Until proper solution based on runtime PM is applied
(similar to what was done for Exynos5433), mark that clock as critical
so it won't be disabled.

It was observed on Samsung Galaxy S6 device (based on Exynos7420), where
UFS module is probed before pmic used to power that device.
In this case defer probe was happening and that clock was disabled by
UFS driver, causing whole boot to hang on next CMU access.

Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com
[s.nawrocki: Added comment in the code]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: Make global sysctls readonly in non-init netns

commit 2671fa4dc0109d3fb581bc3078fdf17b5d9080f6 upstream.

These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)

Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.

The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).

Commit d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.

Fixes: d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kobject_uevent: remove warning in init_uevent_argv()

commit b4104180a2efb85f55e1ba1407885c9421970338 upstream.

syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error.  So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.

Link: https://lore.kernel.org/r/20201107082206.GA19079@kroah.com
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reported-by: syzbot+92340f7b2b4789907fdb@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210405094852.1348499-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm ioctl: fix out of bounds array access when no devices

commit 4edbe1d7bcffcd6269f3b5eb63f710393ff2ec7a upstream.

If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.

Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[iwamatsu: Adjust context]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/core/fair share: Lock the thermal zone while looping over instances

commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.

The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Avoid handcoded DIVU in `__div64_32' altogether

commit 25ab14cbe9d1b66fda44c71a2db7582a31b6f5cd upstream.

Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead.  GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.

For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit.  Likely still faster then the generic algorithm though.

This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:

In file included from ./include/linux/math.h:5,
                 from ./include/linux/kernel.h:13,
                 from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
   76 |                 __asm__("divu   $0, %z1, %z2"                           \
      |                 ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
  245 |                 __rem = __div64_32(&(n), __base);       \
      |                         ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
   91 |         *remainder = do_div(dividend, divisor);
      |                      ^~~~~~

This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz.  The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Avoid DIVU in `__div64_32' is result would be zero

commit c1d337d45ec0a802299688e17d568c4e3a585895 upstream.

We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away.  We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.

This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Reinstate platform `__div64_32' handler

commit c49f71f60754acbff37505e1d16ca796bf8a8140 upstream.

Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.

The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced.  Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation

Correct the handler as follows then:

- Revert most of the commit referred, however retaining the current
  formatting, except for the final two instructions of the inline asm
  sequence, which the original commit missed.  Omit the original 64-bit
  parts though.

- Rename the original `do_div' macro to `__div64_32'.  Use the combined
  `x' constraint referring to the MD accumulator as a whole, replacing
  the original individual `h' and `l' constraints used for $hi and $lo
  registers respectively, of which `h' has been obsoleted with GCC 4.4.
  Update surrounding code accordingly.

  We have since removed support for GCC versions before 4.9, so no need
  for a special arrangement here; GCC has supported the `x' constraint
  since forever anyway, or at least going back to 1991.

- Rename the `__base' local variable in `__div64_32' to `__radix' to
  avoid a conflict with a local variable in `do_div'.

- Actually enable this code for 32-bit rather than 64-bit configurations
  by qualifying it with BITS_PER_LONG being 32 instead of 64.  Include
  <asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
  don't need anything else.

- Finally include <asm-generic/div64.h> last rather than first.

This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.

Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FDDI: defxx: Make MMIO the configuration default except for EISA

commit 193ced4a79599352d63cb8c9e2f0c6043106eb6a upstream.

Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.

The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems.  It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support.  However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.

Make DEFXX_MMIO the configuration default then, except where configured
for EISA.  This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core.  Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.

The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.

Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e89a2cfb7d7b ("[TC] defxx: TURBOchannel support")
Cc: stable@vger.kernel.org # v2.6.21+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Cancel pvclock_gtod_work on module removal

commit 594b27e677b35f9734b1969d175ebc6146741109 upstream.

Nothing prevents the following:

  pvclock_gtod_notify()
    queue_work(system_long_wq, &pvclock_gtod_work);
  ...
  remove_module(kvm);
  ...
  work_queue_run()
    pvclock_gtod_work() <- UAF

Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.

Cancel the work in kvm_arch_exit() to prevent that.

Fixes: 16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <87czu4onry.ffs@nanos.tec.linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: fix race condition about TRSMRCY of resume

commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.

This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.

CC: <stable@vger.kernel.org>
Reported-by: Tianping Fang <tianping.fang@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix gadget DMA unmap direction

commit 75a41ce46bae6cbe7d3bb2584eb844291d642874 upstream.

The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.

A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.

Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Increase timeout for HC halt

commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.

On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: scan: Fix a memory leak in an error handling path

[ Upstream commit 0c8bd174f0fc131bc9dfab35cd8784f59045da87 ]

If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.

Fixes: eb50aaf960e3 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: fotg210-hcd: Fix an error message

[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ]

'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.

So remove simplify the first error message.

While at it, also remove the useless initialization of 'retval'.

Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: proximity: pulsedlight: Fix rumtime PM imbalance on error

[ Upstream commit a2fa9242e89f27696515699fe0f0296bf1ac1815 ]

When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.

Fixes: 4ac4e086fd8c5 ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

squashfs: fix divide error in calculate_skip()

commit d6e621de1fceb3b098ebf435ef7ea91ec4838a1a upstream.

Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode.  This value
has been corrupted to a much larger value than expected.

Calculate_skip() is passed i_size_read(inode) >> msblk->block_log.  Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.

This patch changes the function to use u64.  This will accommodate any
unexpectedly large values due to corruption.

The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7.  So file_size corruption does not lead to
an unexpectedly large return result here.

Link: https://lkml.kernel.org/r/20210507152618.9447-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+e8f781243ce16ac2f962@syzkaller.appspotmail.com>
Reported-by: <syzbot+7b98870d4fec9447b951@syzkaller.appspotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Fix crashes when toggling entry flush barrier

commit aec86b052df6541cc97c5fca44e5934cbea4963b upstream.

The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.

However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:

  sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20

Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).

Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.

Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: entry: fix off-by-one error in syscall number validation

commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream.

We have NR_syscall syscalls from [0 .. NR_syscall-1].
However the check for invalid syscall number is "> NR_syscall" as
opposed to >=. This off-by-one error erronesously allows "NR_syscall"
to be treated as valid syscall causeing out-of-bounds access into
syscall-call table ensuing a crash (holes within syscall table have a
invalid-entry handler but this is beyond the array implementing the
table).

This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10
kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has
NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was
not handled as -ENOSYS but processed leading to a crash.

Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48
Reported-by: Shahab Vahedi <shahab@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel: kexec_file: fix error return code of kexec_calculate_store_digests()

[ Upstream commit 31d82c2c787d5cf65fedd35ebbc0c1bd95c1a679 ]

When vzalloc() returns NULL to sha_regions, no error return code of
kexec_calculate_store_digests() is assigned.  To fix this bug, ret is
assigned with -ENOMEM in this case.

Link: https://lkml.kernel.org/r/20210309083904.24321-1-baijiaju1990@gmail.com
Fixes: a43cac0d9dc2 ("kexec: split kexec_file syscall code to kexec_file.c")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksm: fix potential missing rmap_item for stable_node

[ Upstream commit c89a384e2551c692a9fe60d093fd7080f50afc51 ]

When removing rmap_item from stable tree, STABLE_FLAG of rmap_item is
cleared with head reserved.  So the following scenario might happen: For
ksm page with rmap_item1:

cmp_and_merge_page
  stable_node->head = &migrate_nodes;
  remove_rmap_item_from_tree, but head still equal to stable_node;
  try_to_merge_with_ksm_page failed;
  return;

For the same ksm page with rmap_item2, stable node migration succeed this
time.  The stable_node->head does not equal to migrate_nodes now.  For ksm
page with rmap_item1 again:

cmp_and_merge_page
 stable_node->head != &migrate_nodes && rmap_item->head == stable_node
 return;

We would miss the rmap_item for stable_node and might result in failed
rmap_walk_ksm().  Fix this by set rmap_item->head to NULL when rmap_item
is removed from stable tree.

Link: https://lkml.kernel.org/r/20210330140228.45635-5-linmiaohe@huawei.com
Fixes: 4146d2d673e8 ("ksm: make !merge_across_nodes migration safe")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()

[ Upstream commit da56388c4397878a65b74f7fe97760f5aa7d316b ]

A rare out of memory error would prevent removal of the reserve map region
for a page.  hugetlb_fix_reserve_counts() handles this rare case to avoid
dangling with incorrect counts.  Unfortunately, hugepage_subpool_get_pages
and hugetlb_acct_memory could possibly fail too.  We should correctly
handle these cases.

Link: https://lkml.kernel.org/r/20210410072348.20437-5-linmiaohe@huawei.com
Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()

[ Upstream commit 74e579bf231a337ab3786d59e64bc94f45ca7b3f ]

In writable and !referenced case, the result value should be
SCAN_LACK_REFERENCED_PAGE for trace_mm_collapse_huge_page_isolate()
instead of default 0 (SCAN_FAIL) here.

Link: https://lkml.kernel.org/r/20210306032947.35921-5-linmiaohe@huawei.com
Fixes: 7d2eba0557c1 ("mm: add tracepoint for scanning pages")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Fix off-by-one power_state index heap overwrite

[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ]

An out of bounds write happens when setting the default power state.
KASAN sees this as:

[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
==================================================================
BUG: KASAN: slab-out-of-bounds in
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157

CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50
Hardware name: eMachines        eMachines E620  /Nile       , BIOS V1.03 09/30/2008
Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x18/0x239
 kasan_report+0x170/0x1a8
 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
 radeon_atombios_get_power_modes+0x144/0x1888 [radeon]
 radeon_pm_init+0x1019/0x1904 [radeon]
 rs690_init+0x76e/0x84a [radeon]
 radeon_device_init+0x1c1a/0x21e5 [radeon]
 radeon_driver_load_kms+0xf5/0x30b [radeon]
 drm_dev_register+0x255/0x4a0 [drm]
 radeon_pci_probe+0x246/0x2f6 [radeon]
 pci_device_probe+0x1aa/0x294
 really_probe+0x30e/0x850
 driver_probe_device+0xe6/0x135
 device_driver_attach+0xc1/0xf8
 __driver_attach+0x13f/0x146
 bus_for_each_dev+0xfa/0x146
 bus_add_driver+0x2b3/0x447
 driver_register+0x242/0x2c1
 do_one_initcall+0x149/0x2fd
 do_init_module+0x1ae/0x573
 load_module+0x4dee/0x5cca
 __do_sys_finit_module+0xf1/0x140
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Without KASAN, this will manifest later when the kernel attempts to
allocate memory that was stomped, since it collides with the inline slab
freelist pointer:

invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G        W 5.10.12-gentoo-E620 #2
Hardware name: eMachines        eMachines E620  /Nile , BIOS V1.03       09/30/2008
RIP: 0010:kfree+0x115/0x230
Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7
RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246
RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d
RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80
RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000
R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100
FS:  00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0
Call Trace:
 __free_fdtable+0x16/0x1f
 put_files_struct+0x81/0x9b
 do_exit+0x433/0x94d
 do_group_exit+0xa6/0xa6
 __x64_sys_exit_group+0xf/0xf
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe80ef64bea
Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0.
RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea
RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0
R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0
Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ...

Use a valid power_state index when initializing the "flags" and "misc"
and "misc2" fields.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Reported-by: Erhard F. <erhard_f@mailbox.org>
Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)")
Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b

[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ]

Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.

However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.

I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.

This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2 fix handling of sr_eof in SEEK's reply

[ Upstream commit 73f5c88f521a630ea1628beb9c2d48a2e777a419 ]

Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.

Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()

[ Upstream commit ed34695e15aba74f45247f1ee2cf7e09d449f925 ]

We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:

if (fh->size > sizeof(struct nfs_fh))

should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.

struct nfs_fh {
unsigned short         size;
unsigned char          data[NFS_MAXFHSIZE];
}

but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination.  The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.

Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <nlivic@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Deal correctly with attribute generation counter overflow

[ Upstream commit 9fdbfad1777cb4638f489eeb62d85432010c0031 ]

We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.

Fixes: f5062003465c ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Always flush out writes in nfs42_proc_fallocate()

[ Upstream commit 99f23783224355e7022ceea9b8d9f62c0fd01bd8 ]

Whether we're allocating or delallocating space, we should flush out the
pending writes in order to avoid races with attribute updates.

Fixes: 1e564d3dbd68 ("NFSv4.2: Fix a race in nfs42_proc_deallocate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook

[ Upstream commit a506bd5756290821a4314f502b4bafc2afcf5260 ]

The commit 1879445dfa7b ("perf/core: Set event's default
::overflow_handler()") set a default event->overflow_handler in
perf_event_alloc(), and replace the check event->overflow_handler with
is_default_overflow_handler(), but one is missing.

Currently, the bp->overflow_handler can not be NULL. As a result,
enable_single_step() is always not invoked.

Comments from Zhen Lei:

 https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210207105934.2001-1-thunder.leizhen@huawei.com/

Fixes: 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Release OF node in pci_scan_device()'s error path

[ Upstream commit c99e755a4a4c165cad6effb39faffd0f3377c02d ]

In pci_scan_device(), if pci_setup_device() fails for any reason, the code
will not release device's of_node by calling pci_release_of_node().  Fix
that by calling the release function.

Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix a redundant call to f2fs_balance_fs if an error occurs

[ Upstream commit 28e18ee636ba28532dbe425540af06245a0bbecb ]

The  uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails.  This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.

Thanks to Jaegeuk Kim for suggesting an appropriate fix.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 2a3407607028 ("f2fs: call f2fs_balance_fs only when node was changed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt286: Make RT286_SET_GPIO_* readable and writable

[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]

The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-5-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix RX VLAN offload

[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]

The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: Annotate nested lock for lockdep

[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]

The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).

This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.

===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(p->lock)/1);
  lock(&(p->lock)/1);
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join

[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]

Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
        u16                        beacon_period;        /*     0     2 */
        u16                        dtim_period;          /*     2     2 */
        u16                        cap_info;             /*     4     2 */
        u8                         bss_type;             /*     6     1 */
        u8                         bssid[6];             /*     7     6 */
        struct iw_mgmt_essid_pset  ssid;                 /*    13    34 */
        struct iw_mgmt_ds_pset     ds_pset;              /*    47     3 */
        struct iw_mgmt_cf_pset     cf_pset;              /*    50     8 */
        struct iw_mgmt_ibss_pset   ibss_pset;            /*    58     4 */
        struct iw_mgmt_data_rset   bss_basic_rset;       /*    62    10 */

        /* size: 72, cachelines: 2, members: 10 */
        /* last cacheline: 8 bytes */
};

$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        struct iw_mgmt_data_rset   operational_rset;     /*     4    10 */
        u16                        reserved2;            /*    14     2 */
        u16                        timeout;              /*    16     2 */
        u16                        probe_delay;          /*    18     2 */
        u8                         timestamp[8];         /*    20     8 */
        u8                         local_time[8];        /*    28     8 */
        struct wl3501_req          req;                  /*    36    72 */

        /* size: 108, cachelines: 2, members: 10 */
        /* last cacheline: 44 bytes */
};

$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        u16                        status;               /*     4     2 */
        char                       timestamp[8];         /*     6     8 */
        char                       localtime[8];         /*    14     8 */
        struct wl3501_req          req;                  /*    22    72 */
        /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
        u8                         rssi;                 /*    94     1 */

        /* size: 96, cachelines: 2, members: 8 */
        /* padding: 1 */
        /* last cacheline: 32 bytes */
};

The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt

[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]

Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16                        next_blk;             /*     0     2 */
u8                         sig_id;               /*     2     1 */
u8                         routing;              /*     3     1 */
u16                        data;                 /*     4     2 */
u16                        size;                 /*     6     2 */
u8                         pri;                  /*     8     1 */
u8                         service_class;        /*     9     1 */
struct {
u8                 daddr[6];             /*    10     6 */
u8                 saddr[6];             /*    16     6 */
} addr;                                          /*    10    12 */

/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};

$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16                        next_blk;             /*     0     2 */
u8                         sig_id;               /*     2     1 */
u8                         routing;              /*     3     1 */
u16                        data;                 /*     4     2 */
u16                        size;                 /*     6     2 */
u8                         reception;            /*     8     1 */
u8                         pri;                  /*     9     1 */
u8                         service_class;        /*    10     1 */
struct {
u8                 daddr[6];             /*    11     6 */
u8                 saddr[6];             /*    17     6 */
} addr;                                          /*    11    12 */

/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};

The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Stop calling printk in rtas_stop_self()

[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]

RCU complains about us calling printk() from an offline CPU:

  =============================
  WARNING: suspicious RCU usage
  5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
  -----------------------------
  kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 2, debug_locks = 1
  no locks held by swapper/0/0.

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
  Call Trace:
    dump_stack+0xec/0x144 (unreliable)
    lockdep_rcu_suspicious+0x124/0x144
    __lock_acquire+0x1098/0x28b0
    lock_acquire+0x128/0x600
    _raw_spin_lock_irqsave+0x6c/0xc0
    down_trylock+0x2c/0x70
    __down_trylock_console_sem+0x60/0x140
    vprintk_emit+0x1a8/0x4b0
    vprintk_func+0xcc/0x200
    printk+0x40/0x54
    pseries_cpu_offline_self+0xc0/0x120
    arch_cpu_idle_dead+0x54/0x70
    do_idle+0x174/0x4a0
    cpu_startup_entry+0x38/0x40
    rest_init+0x268/0x388
    start_kernel+0x748/0x790
    start_here_common+0x1c/0x614

Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix broken tracex1 due to kprobe argument change

[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]

>From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.

This commit fixes by using bpf_probe_read_kernel.

Signed-off-by: Yaqi Chen <chendotjs@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210416154803.37157-1-chendotjs@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt286: Generalize support for ALC3263 codec

[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]

The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.

The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: Fix out-of-bounds warning in sctp_process_asconf_param()

[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]

Fix the following out-of-bounds warning:

net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: nconf: stop endless search loops

[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]

If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.

The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.

My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.

This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.

OTOH, this code is now essentially all his work.

Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.

Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Set CC to clang in lib.mk if LLVM is set

[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]

selftests/bpf/Makefile includes lib.mk. With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cuse: prevent clone

[ Upstream commit 8217673d07256b22881127bf50dce874d0e51653 ]

For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.

Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: clear the beacon's CRC after channel switch

[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]

After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.

This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.

Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6_vti: proper dev_{hold|put} in ndo_[un]init methods

[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]

After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]

Issue here is that:

- all dev_put() should be paired with a corresponding prior dev_hold().

- A driver doing a dev_put() in its ndo_uninit() MUST also
  do a dev_hold() in its ndo_init(), only when ndo_init()
  is returning 0.

Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.

Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()

[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS:  00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 dev_put include/linux/netdevice.h:4135 [inline]
 vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
 register_netdevice+0xadf/0x1500 net/core/dev.c:10308
 vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
 vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x331/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmmsg+0x195/0x470 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: initialize skb_queue_head at l2cap_chan_create()

[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]

syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.

Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.

[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842

Reported-and-tested-by: syzbot <syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default

[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]

Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.

Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: rme9652: don't disable if not enabled

[ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ]

rme9652 wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.

[    1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device
[    1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[    1.759968] Call Trace:
[    1.760145]  snd_rme9652_card_free+0x76/0xa0 [snd_rme9652]
[    1.760434]  release_card_device+0x4b/0x80 [snd]
[    1.760679]  device_release+0x3b/0xa0
[    1.760874]  kobject_put+0x94/0x1b0
[    1.761059]  put_device+0x13/0x20
[    1.761235]  snd_card_free+0x61/0x90 [snd]
[    1.761454]  snd_rme9652_probe+0x3be/0x700 [snd_rme9652]

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-4-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hdspm: don't disable if not enabled

[ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ]

hdspm wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.

[    1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device
[    1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[    1.795181] Call Trace:
[    1.795320]  snd_hdspm_card_free+0x58/0xa0 [snd_hdspm]
[    1.795595]  release_card_device+0x4b/0x80 [snd]
[    1.795860]  device_release+0x3b/0xa0
[    1.796072]  kobject_put+0x94/0x1b0
[    1.796260]  put_device+0x13/0x20
[    1.796438]  snd_card_free+0x61/0x90 [snd]
[    1.796659]  snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-3-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hdsp: don't disable if not enabled

[ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ]

hdsp wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.

[    1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device
[    1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[    1.766985] Call Trace:
[    1.767121]  snd_hdsp_card_free+0x94/0xf0 [snd_hdsp]
[    1.767388]  release_card_device+0x4b/0x80 [snd]
[    1.767639]  device_release+0x3b/0xa0
[    1.767838]  kobject_put+0x94/0x1b0
[    1.768027]  put_device+0x13/0x20
[    1.768207]  snd_card_free+0x61/0x90 [snd]
[    1.768430]  snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210321153840.378226-2-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Set FIFO sizes for ipq806x

[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]

Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver.  This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.

(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: convert dest node's address to network order

[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]

(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:

net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24:    expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24:    got int

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix debugfs dump

[ Upstream commit 92c48950b43f4a767388cf87709d8687151a641f ]

This patch fixes the following message which randomly pops up during
glocktop call:

seq_file: buggy .next function table_seq_next did not update position index

The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "fdt: Properly handle "no-map" field in the memory region"

This reverts commit 86ac82a7c708acf4738c396228be7b8fdaae4d99.
It is not really a fix, and the backport misses dependencies, which
breaks existing platforms.

Reported-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "of/fdt: Make sure no-map does not remove already reserved regions"

This reverts commit 666ae7c255f9eb7a8fd8e55641542f3624a78b43.
It is not really a fix, and the backport misses dependencies, which
breaks existing platforms.

Reported-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: delay auto_asconf init until binding the first addr

commit 34e5b01186858b36c4d7c87e1a025071e8e2401f upstream.

As Or Cohen described:

  If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
  held and sp->do_auto_asconf is true, then an element is removed
  from the auto_asconf_splist without any proper locking.

  This can happen in the following functions:
  1. In sctp_accept, if sctp_sock_migrate fails.
  2. In inet_create or inet6_create, if there is a bpf program
     attached to BPF_CGROUP_INET_SOCK_CREATE which denies
     creation of the sctp socket.

This patch is to fix it by moving the auto_asconf init out of
sctp_init_sock(), by which inet_create()/inet6_create() won't
need to operate it in sctp_destroy_sock() when calling
sk_common_release().

It also makes more sense to do auto_asconf init while binding the
first addr, as auto_asconf actually requires an ANY addr bind,
see it in sctp_addr_wq_timeout_handler().

This addresses CVE-2021-23133.

Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications")
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net/sctp: fix race condition in sctp_destroy_sock"

commit 01bfe5e8e428b475982a98a46cca5755726f3f7f upstream.

This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b.

This one has to be reverted as it introduced a dead lock, as
syzbot reported:

       CPU0                    CPU1
       ----                    ----
  lock(&net->sctp.addr_wq_lock);
                               lock(slock-AF_INET6);
                               lock(&net->sctp.addr_wq_lock);
  lock(slock-AF_INET6);

CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1
is that of sctp_close().

The original issue this commit fixed will be fixed in the next
patch.

Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kfifo: fix ternary sign extension bugs

[ Upstream commit 926ee00ea24320052b46745ef4b00d91c05bd03d ]

The intent with this code was to return negative error codes but instead
it returns positives.

The problem is how type promotion works with ternary operations.  These
functions return long, "ret" is an int and "copied" is a u32.  The
negative error code is first cast to u32 so it becomes a high positive and
then cast to long where it's still a positive.

We could fix this by declaring "ret" as a ssize_t but let's just get rid
of the ternaries instead.

Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda
Fixes: 5bf2b19320ec ("kfifo: add example files to the kernel sample directory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:nfc:digital: Fix a double free in digital_tg_recv_dep_req

[ Upstream commit 75258586793efc521e5dd52a5bf6c7a4cf7002be ]

In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp).
If nfc_tm_data_received() failed, the callee will free the resp via
kfree_skb() and return error. But in the exit branch, the resp
will be freed again.

My patch sets resp to NULL if nfc_tm_data_received() failed, to
avoid the double free.

Fixes: 1c7a4c24fbfd9 ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send

[ Upstream commit 6d72e7c767acbbdd44ebc7d89c6690b405b32b57 ]

In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..).
If some error happens in emac_tx_fill_tpd(), the skb will be freed via
dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd().
But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len).

As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len,
thus my patch assigns skb->len to 'len' before the possible free and
use 'len' instead of skb->len later.

Fixes: b9b17debc69d2 ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')

[ Upstream commit 8a87a507714386efc39c3ae6fa24d4f79846b522 ]

  AS      arch/powerpc/platforms/52xx/lite5200_sleep.o
arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages:
arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression

In the following code, 'addi' is wrong, has to be 'add'

/* local udelay in sram is needed */
  udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
addi r12, r13, r12 /* end */

Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices

[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ]

When the error check in ath9k_hw_read_revisions() was added, it checked for
-EIO which is what ath9k_regread() in the ath9k_htc driver uses. However,
for plain ath9k, the register read function uses ioread32(), which just
returns -1 on error. So if such a read fails, it still gets passed through
and ends up as a weird mac revision in the log output.

Fix this by changing ath9k_regread() to return -1 on error like ioread32()
does, and fix the error check to look for that instead of -EIO.

Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: davinci_emac: Fix incorrect masking of tx and rx error channel

[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ]

The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels)
are incorrect and always lead to a zero result. The mask values are
currently the incorrect post-right shifted values, fix this by setting
them to the currect values.

(I double checked these against the TMS320TCI6482 data sheet, section
5.30, page 127 to ensure I had the correct mask values for the TXERRCH
and RXERRCH fields in the MACSTATUS register).

Addresses-Coverity: ("Operands don't affect result")
Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails

[ Upstream commit 783a11bf2400e5d5c42a943c3083dc0330751842 ]

When i40iw_hmc_sd_one fails, chunk is freed without the deletion of chunk
entry in the PBLE info list.

Fix it by adding the chunk entry to the PBLE info list only after
successful addition of SD in i40iw_hmc_sd_one.

This fixes a static checker warning reported here:
  https://lore.kernel.org/linux-rdma/YHV4CFXzqTm23AOZ@mwanda/

Fixes: 9715830157be ("i40iw: add pble resource files")
Link: https://lore.kernel.org/r/20210416002104.323-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock/vmci: log once the failed queue pair allocation

[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:

    qp_alloc_hypercall result = -20
    Could not attach to queue pair with -20

"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.

Since the error message can be useful in some cases, print it only once.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwl8k: Fix a double Free in mwl8k_probe_hw

[ Upstream commit a8e083ee8e2a6c94c29733835adae8bf5b832748 ]

In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).

Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().

My patch set txq->txd to NULL after the first free to avoid the
double free.

Fixes: a66098daacee2 ("mwl8k: Marvell TOPDOG wireless driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402182627.4256-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh7760: fix IRQ error path

[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ]

While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used.  Use a proper
*goto* instead!

Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: extract host bridge from pci_bus prior to bus removal

[ Upstream commit 38d0b1c9cec71e6d0f3bddef0bbce41d05a3e796 ]

The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.

Store the host_bridge reference in a separate variable prior to
pci_bus_remove().

Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: pci-legacy: stop using of_pci_range_to_resource

[ Upstream commit 3ecb9dc1581eebecaee56decac70e35365260866 ]

Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").

Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.

In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set
resource limits")

So just stop using of_pci_range_to_resource, which does not work for
MIPS.

Fixes PCI errors like:
  pci_bus 0000:00: root bus resource [io  0xffffffff]

Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sh7760: add IRQ check

[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: jz4780: add IRQ check

[ Upstream commit c5e5f7a8d931fb4beba245bdbc94734175fda9de ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: emev2: add IRQ check

[ Upstream commit bb6129c32867baa7988f7fd2066cf18ed662d240 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: 5faf6e1f58b4 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: cadence: add IRQ check

[ Upstream commit 5581c2c5d02bc63a0edb53e061c8e97cd490646e ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code.  Stop calling devm_request_irq() with invalid
IRQ #s.

Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: thunderx: Fix unintentional sign extension issue

[ Upstream commit e701a25840360706fe4cf5de0015913ca19c274b ]

The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt7601u: fix always true expression

[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ]

Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true.  If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.

Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.

Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: bail out if cipher schemes are invalid

[ Upstream commit db878e27a98106a70315d264cc92230d84009e72 ]

If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning.  Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.

Fixes: 2475b1cc0d52 ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: iommu: fix build when neither PCI or IBMVIO is set

[ Upstream commit b27dadecdf9102838331b9a0b41ffc1cfe288154 ]

When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.

Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
  178 | static struct notifier_block fail_iommu_bus_notifier = {

Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix PMU constraint check for EBB events

[ Upstream commit 10f8f96179ecc7f69c927f6d231f6d02736cea83 ]

The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.

Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.

  [35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
  at 10004a18 nip 10004a18 lr 100049f8 code 1 in
  cpu_event_pinned_vs_ebb_test[10000000+10000]

Test results after the patch:

  $ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
  test: cpu_event_pinned_vs_ebb
  tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
  Binding to cpu 8
  EBB Handler is at 0x100050c8
  read error on event 0x7fffe6bd4040!
  PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
  success: cpu_event_pinned_vs_ebb

This bug was hidden by other logic until commit 1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).

Fixes: 4df489991182 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc911792]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

liquidio: Fix unintented sign extension of a left shift of a u16

[ Upstream commit 298b58f00c0f86868ea717426beb5c1198772f81 ]

The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.

It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.

Fix this by casting the port parameter to the macro to a u64 before
the shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls

[ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ]

There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity.  This patch
adds those missing checks.

Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: prevent potential memory corruption

[ Upstream commit ca4d4c34ae9aa5c3c0da76662c5e549d2fc0cc86 ]

If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:

memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);

Fixes: c3b1e1e8a76f ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: core: remove redundant spin_lock pair in snd_card_disconnect

[ Upstream commit abc21649b3e5c34b143bf86f0c78e33d5815e250 ]

modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.

Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/prom: Mark identical_pvr_fixup as __init

[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]

If identical_pvr_fixup() is not inlined, there are two modpost warnings:

WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.

WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.

identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").

Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lapbether: Prevent racing when checking whether the netif is running

[ Upstream commit 5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]

There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.

However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).

This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars

[ Upstream commit 210e4c89ef61432040c6cd828fefa441f4887186 ]

The 'ret' variable was initialized to zero but then it was not updated
from the fprintf() return, fix it.

Reported-by: Yang Li <yang.lee@linux.alibaba.com>
cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
cc: Ingo Molnar <mingo@redhat.com>
cc: Jiri Olsa <jolsa@redhat.com>
cc: Mark Rutland <mark.rutland@arm.com>
cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fixes: 90f18e63fbd00513 ("perf symbols: List symbols in a dso in ascending name order")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: plantronics: Workaround for double volume key presses

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]

Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.

Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/events/amd/iommu: Fix sysfs type mismatch

[ Upstream commit de5bc7b425d4c27ae5faa00ea7eb6b9780b9a355 ]

dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.

$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a

$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):

Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.

Fixes: 7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: core: fix resource leaks in hsi_add_client_from_dt()

[ Upstream commit 5c08b0f75575648032f309a6f58294453423ed93 ]

If some of the allocations fail between the dev_set_name() and the
device_register() then the name will not be freed.  Fix this by
moving dev_set_name() directly in front of the call to device_register().

Fixes: a2aa24734d9d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sni_53c710: Add IRQ check

[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below).  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru
Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sun3x_esp: Add IRQ check

[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code.  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru
Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: jazz_esp: Add IRQ check

[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code.  Stop calling request_irq() with the invalid IRQ #s.

Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru
Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: uniphier: Fix potential infinite loop

[ Upstream commit f6b1340dc751a6caa2a0567b667d0f4f4172cd58 ]

The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents.  Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.

Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch

[ Upstream commit 0fa430e96d3c3561a78701f51fd8593da68b8474 ]

gcc-11 warns about the prototype not exactly matching the function
definition:

drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
  363 |                 u8 keybuf[5], u32 *event, int *state)
      |                 ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
                 from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
  490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
      |                                                                 ^~~~

Fixes: 776338e121b9 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration

[ Upstream commit 5b11c9d80bde81f6896cc85b23aeaa9502a704ed ]

An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in
the declaration, but now gcc-11 warns about this:

drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=]
 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
      |                       ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33:
include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’
  252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
      |                       ~~~~~~~~~~~~~~^~~~~

Change the type back to what the function definition uses.

Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org
Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libahci_platform: fix IRQ check

[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ]

Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...

Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sata_mv: add IRQ checks

[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]

The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...

Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).

Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>