Jiyoung Jeong [Mon, 8 Oct 2018 10:19:12 +0000 (19:19 +0900)]
arch: config: enable HW_REV_DETECT for getting board revision in bootargs
CONFIG_HW_REV_DETECT
Change-Id: I12f463dfa278679be448924ad6866cfe194b54e5
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>
Jiyoung Jeong [Mon, 8 Oct 2018 10:16:53 +0000 (19:16 +0900)]
drivers: modem_if: Get board revision using bootargs
In bootargs "revision="
Change-Id: Iba4f8d28e5d130e33d8aa1d7ea193ed5c59e3498
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>
Wooyeon Kim [Mon, 8 Oct 2018 05:53:02 +0000 (14:53 +0900)]
[9610][EVB] arm64: defconfig: add flash_s2mu106 defconfig for camera flash
- for Flash_S2MU106
PR JIRA ID: CPR-308
Change-Id: I35aebf064739f0f374b9a70696853c115ec532ef
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Wooyeon Kim [Mon, 8 Oct 2018 05:51:15 +0000 (14:51 +0900)]
[9610][EVB] dtsi: camera: add Flash nodes
- FLASH_S2MU106 added
PR JIRA ID: CPR-308
Change-Id: Idc55dc57c28cffc8b68ad8abd36bebcc4c20d8f0
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
xingbin [Mon, 15 Oct 2018 03:37:37 +0000 (11:37 +0800)]
(CR):[Kane]:[factory]tcmd:add lcd disp_util function
Change-Id: I9ac688b1e728c10423fb121b0b49e3e89fb9ffb8
Signed-off-by: xingbin <xingbin@huaqin.com>
hwangjae lee [Mon, 8 Oct 2018 05:05:24 +0000 (14:05 +0900)]
[9610] fbdev: dpu: default brightness valofr NT36672A ddi is set
Default brightness value is set to 170. This value is set at DDI
probe sequence.
Change-Id: Ic286ee658fea9e3db938ca8c03cdaa35feaad3d5
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
xingbin [Sat, 13 Oct 2018 08:55:36 +0000 (16:55 +0800)]
(CR):[Kane]:[factory]tcmd:add lcd disp_util function
Change-Id: Ie594844617320a569757256c4a7a1b2c4786df1e
Signed-off-by: xingbin <xingbin@huaqin.com>
zhangjiaquan [Sat, 13 Oct 2018 04:52:32 +0000 (00:52 -0400)]
(CR):[Kane]kernel:change madera ADSP interrupts type
change madera ADSP interrupts type from edge to level
Change-Id: Iddfca0e9908c4514b91c5dceaab435407d8e9eec
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
zhangyijie [Tue, 9 Oct 2018 09:50:54 +0000 (17:50 +0800)]
(CR):[Kane]:kernel:vibrator enable LPF (1/1)
Enable AW8695 motor conctrl IC inner LPF funtion
Change-Id: I2f4a526ae1a7ab1b57c11d8e71402dddac6ad08a
zhangyijie [Tue, 9 Oct 2018 09:41:26 +0000 (17:41 +0800)]
(CR):[Kane]:dts:vibrator adjust i2c clk(1/1)
Adjust i2c clk to 400kHz Acording to IC Manufacturer mail
Change-Id: I1a5b927c89e5a375d6a6e4050c9292221798d72c
Sangwook Ju [Thu, 11 Oct 2018 08:02:11 +0000 (17:02 +0900)]
[9610] arm64: configs: MULTI panel support feature is enabled
Change-Id: I290dea83f0e42ea3b331c0c92c705ddf56db5b9a
Signed-off-by: Sangwook Ju <sw.ju@samsung.com>
Sangwook Ju [Thu, 11 Oct 2018 08:01:39 +0000 (17:01 +0900)]
[9610] fbdev: dpu: code bug fix
Change-Id: I1661b38fded5a1aa2faa744031167473c59f2fc6
Signed-off-by: Sangwook Ju <sw.ju@samsung.com>
zhangyijie [Sat, 6 Oct 2018 06:54:37 +0000 (14:54 +0800)]
(CR):[Kane]:kernel: vibrator modify for haptic(1/3)
add vibrator close loop for bark function and change node name to
standard name for haptic
Change-Id: I8d46dc0f35c51e5b48dc9ccba02fd865cd968e18
yanfei [Sun, 30 Sep 2018 06:21:04 +0000 (14:21 +0800)]
(CR):[kane]:kernel:add cap sensor driver
add cap sensor driver
Change-Id: I10e1ba136c833d6b0214cb33463e7aeab90dd874
Signed-off-by: yanfei <yanfei5@huaqin.com>
Sangwook Ju [Fri, 28 Sep 2018 06:02:59 +0000 (15:02 +0900)]
[Robusta2] arm64:dts: Adjust LDO40 output voltage to 3.0V
Change-Id: I6eb4ec91ea32a9f0c1ccf51ee7d77ff7a886d341
Signed-off-by: Sangwook Ju <sw.ju@samsung.com>
hwangjae lee [Fri, 7 Sep 2018 10:13:27 +0000 (19:13 +0900)]
[9609] arm64: configs: PWM_BACKLIGHT is disabled
Change-Id: Ia4fec1e8ec69b3c64ed9fd402dd1e78fe99edecd
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hwangjae lee [Thu, 2 Aug 2018 01:06:58 +0000 (10:06 +0900)]
[9609] arm64: config: enabled panel cabc feature
Change-Id: I5f5f3adcfc16840c52bfc77c86d70798aa78585f
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hwangjae lee [Thu, 2 Aug 2018 01:06:14 +0000 (10:06 +0900)]
[9609] fbdev: panel: added sysfs for supporting CABC of NT36672A Panel
Change-Id: I3b30b191121ab0db21280f528b7226d1e22fbf90
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hwangjae lee [Fri, 7 Sep 2018 08:46:30 +0000 (17:46 +0900)]
Revert "BSP: NT36672A cabc mode control is added"
This reverts commit
7cce0fd60059bfddd28fd26a7b1946f22317eddf.
Change-Id: I82a032fb5611397d13218a7d847932fc33c9960a
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hwangjae lee [Fri, 7 Sep 2018 08:45:57 +0000 (17:45 +0900)]
Revert "BSP: NT36672A cabc mode config is added"
This reverts commit
fd18ef40eaa46b1ba91ffaba6e7db88107914e12.
Change-Id: Id311a6c94790e6fb7b44a2731c836ca85b68e6f6
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Boyoung [Fri, 28 Sep 2018 02:20:26 +0000 (11:20 +0900)]
[9610] arm64: dts: remove gpip pin
Change-Id: Ia19aed52ac79f28e3b37da770557b5555856cb51
Signed-off-by: Boyoung <eric.by.kim@samsung.com>
Wooyeon Kim [Fri, 14 Sep 2018 07:57:29 +0000 (16:57 +0900)]
[9610][EVB] dts: camera: add camera dtsi for robusta2
Change-Id: I0f22e8bb79bbfc3db9a20b164bc6d9f492f29fc8
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
samsung3 [Thu, 27 Sep 2018 07:43:13 +0000 (15:43 +0800)]
[HACK] fimc-is2: change codes for robusta2
Change-Id: Ic3a2733c0dbc0a7014045441a86a30a02e22e393
Signed-off-by: samsung3 <wooy88.kim@samsung.com>
Wooyeon Kim [Wed, 19 Sep 2018 02:16:26 +0000 (11:16 +0900)]
[9610][EVB] dts: camera: update evb dts file for camera
- PMIC info update
- add robusta2 camera header file
Change-Id: Ib27fbd4ce984a245cda142ef9cea90e245b37460
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Wooyeon Kim [Wed, 19 Sep 2018 02:22:57 +0000 (11:22 +0900)]
[9610][EVB] arm64: defconfig: add FIMC-IS config
- add configs for robusta2 evb
Change-Id: Idb797ef02f1fffd7e35003d455efc9cc4c2e39b7
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
shihuijun [Tue, 25 Sep 2018 09:21:10 +0000 (17:21 +0800)]
(CR):[9610][EVB] motor: bring up aw8695 motor conctrlor defconfig(3/3)
Change-Id: Ieda71182448ff84ea5925e1dc0c3dda4433aaab7
shihuijun [Tue, 25 Sep 2018 09:18:59 +0000 (17:18 +0800)]
(CR):[9610][EVB] motor: bring up aw8695 motor conctrlor dts(2/3)
Change-Id: I09c1b562a722083430352ad2e5342d5c59f6e805
shihuijun [Tue, 25 Sep 2018 09:15:40 +0000 (17:15 +0800)]
(CR):[9610][EVB] motor: bring up aw8695 motor conctrlor(1/3)
Change-Id: I658b161043fbd6b278e242d06396d6d39baadefd
hq_guohongtao5_tmp [Thu, 20 Sep 2018 13:03:04 +0000 (21:03 +0800)]
(CR):[kane]:kernel:add egis fps
add egis fps for evb
Change-Id: I3e164b62a866479a0f1d7ac637fe2f80561a4ba3
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Thu, 20 Sep 2018 08:02:55 +0000 (16:02 +0800)]
[9610][EVB] dts: remove unused audio properies
Change-Id: Ia61ae43cb4c6a1376c23c1b75faa9a01d5dbc85f
Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
Keunho Hwang [Fri, 27 Jul 2018 04:56:23 +0000 (13:56 +0900)]
BSP: IFPMIC RGB LED driver
[9609][WING] drivers: Add & enable RGB LED driver
Bug:HQ00000000
Workaround:no
Change-Id: Iea0130332b92d5ff7f5213c6c791af486a4ebbc2
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>
hq_guohongtao5_tmp [Tue, 18 Sep 2018 10:46:04 +0000 (18:46 +0800)]
[9610][EVB] arm64: dts: added cirrus dsp firmware
Change-Id: I6213d34882e0b2e95694512c4aceb41b3ca522b8
Signed-off-by: Karl Sun <Karl.sun@cirrus.com>
hq_guohongtao5_tmp [Tue, 18 Sep 2018 06:42:35 +0000 (14:42 +0800)]
[9610][EVB] arm64: dts: enabled speaker amp
Change-Id: Idf4c6816e439b16e83ba9eb20d2042304896c266
Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
hq_guohongtao5_tmp [Mon, 17 Sep 2018 11:27:02 +0000 (19:27 +0800)]
[9610][EVB] madera: support Aov driver update
Change-Id: I2f3e428be04c83a81b0162f2581ee9297f28d224
Signed-off-by: Karl Sun <Karl.sun@cirrus.com>
hq_guohongtao5_tmp [Tue, 18 Sep 2018 10:22:40 +0000 (18:22 +0800)]
[9610][EVB] CS35L41: update hw parameters setting for bclk
Change-Id: I6937226e98df0f8c351c04fa6cc2e24471a1d65b
Signed-off-by: Karl Sun <Karl.sun@cirrus.com>
hq_guohongtao5_tmp [Mon, 17 Sep 2018 08:25:09 +0000 (16:25 +0800)]
[9610][EVB] CS35L41: update the smart Pa driver to latest
Change-Id: I21a71a7c2bcbecb162514de93483fcb9090fc890
Signed-off-by: Karl Sun <Karl.sun@cirrus.com>
hq_guohongtao5_tmp [Mon, 17 Sep 2018 07:41:28 +0000 (15:41 +0800)]
[9610][EVB] Support online tune with Cirrus tools
Change-Id: I2c05693a31ec616eeb68a79957a665c7e81670c6
Signed-off-by: Karl Sun <Karl.sun@cirrus.com>
Youngmin Nam [Tue, 18 Sep 2018 10:17:15 +0000 (19:17 +0900)]
[9610][EVB] arm64: dts: add exynos9609-robusta2_evb.dts
Change-Id: I77a1fde7f1fa51da003552c9ca8f85d89628b725
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Youngmin Nam [Tue, 18 Sep 2018 10:16:26 +0000 (19:16 +0900)]
[9610][EVB] arm64: configs: add robusta2_evb_defconfig
Change-Id: I6bc5637425c486f88485d3deb96eacee584f536d
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
liuqiang [Thu, 6 Sep 2018 07:24:07 +0000 (15:24 +0800)]
fix bootup issue after rebase
Change-Id: I8cadc551ccfb9de5b86aa94c55f1c70e1851cf8b
hq_guohongtao5_tmp [Thu, 30 Aug 2018 03:35:55 +0000 (11:35 +0800)]
(CR):[kane]:kernel: add egis fps drivers
add egis fps drivers
Change-Id: I736e84fe6f565d9fb17a40bb541dd2394ca5b100
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Wed, 29 Aug 2018 08:11:20 +0000 (16:11 +0800)]
(CR):[kane]:kernel: add sar sensor sx9325 drivers
add sar sensor sx9325 drivers
Change-Id: I701d32e90ad56d0444df5b8029de6225bf3acf10
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Tue, 28 Aug 2018 07:36:47 +0000 (15:36 +0800)]
(CR):[kane]:dts: add sar sensor sx9325 drivers
add sar sensor sx9325 drivers
Change-Id: Ic383a09580dae90fda73fc90d130ec1e0f4fdbbf
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Tue, 28 Aug 2018 06:18:49 +0000 (14:18 +0800)]
(CR):[kane]:configs: add sensor class drivers
add sensor class drivers
Change-Id: I867f54037f2c377fb14202dc782e53a112b58273
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Tue, 28 Aug 2018 06:07:22 +0000 (14:07 +0800)]
(CR):[kane]:kernel: add sensor class drivers
add sensor class drivers for sar
Change-Id: I7709ed9d502bdb09324b658ea8f167e6abad7e57
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
liuqiang [Mon, 20 Aug 2018 08:12:35 +0000 (16:12 +0800)]
fix build errors after rebase samsung/exynos9609 branch
Change-Id: I4d3ec44b1e65826b549011bcbe02e13468623889
Signed-off-by: liuqiang <liuqiang6@huaqin.com>
kiwoo Kwon [Thu, 9 Aug 2018 08:26:23 +0000 (17:26 +0900)]
[9609][WING] arm64: configs: run savedefconfig for nfc
Change-Id: Iee93d5c5b7a247a86780b50179dd4086c40c2944
Signed-off-by: kiwoo Kwon <kiwo.kwon@samsung.com>
kiwoo Kwon [Thu, 9 Aug 2018 08:24:35 +0000 (17:24 +0900)]
[9609][WING] arm64: dts: add nfc driver
Change-Id: I6d92ac144fa193a7acd7961875fc375f617cee80
Signed-off-by: kiwoo Kwon <kiwo.kwon@samsung.com>
Boojin Kim [Wed, 8 Aug 2018 05:07:22 +0000 (14:07 +0900)]
[9610][ERD] dtsi: chub: add wing board dt
Change-Id: I76f4563c6430e87cdecb85509b129124c7c97a59
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Youngmin Nam [Tue, 7 Aug 2018 04:50:04 +0000 (13:50 +0900)]
[9609][WING] sensor: sar: fix build error by unused variable
Change-Id: I9c5c99de8db8cd6ebacac27ed01e17a892940b27
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
hq_guohongtao5_tmp [Thu, 2 Aug 2018 06:58:56 +0000 (14:58 +0800)]
sensor: add sar sensor drivers
add sar sensor drivers
Bug:HQ00000000
Workaround:no
Change-Id: Ie19158a239feb69a76f7eb547b4ab5a96587c406
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
Youngmin Nam [Fri, 27 Jul 2018 09:32:12 +0000 (18:32 +0900)]
[9610][WING] arm64: dts: enable AVB, ro.arch, system-as-root
Change-Id: I19098ea936e593a7e07a1d5b73081fc0de63073c
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Youngmin Nam [Fri, 27 Jul 2018 08:52:56 +0000 (17:52 +0900)]
[9610][WING] arm64: dts: refactoring dts file
Change-Id: I6fc39e9ee5f48a0e43ea6397f613c9cbe27045f1
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Kyungwoo Kang [Wed, 21 Jun 2017 06:11:52 +0000 (15:11 +0900)]
Documentation: samsung: USI guide docs
This patch include USIv1, USIv2 guide documentations.
Change-Id: I66fa3f70ddda6930b3456320028545a1f7159e25
Signed-off-by: Kyungwoo Kang <kwoo.kang@samsung.com>
Youngmin Nam [Thu, 26 Jul 2018 03:41:37 +0000 (12:41 +0900)]
[9610][WING] arm64: configs: disable FIMC features
Change-Id: Ia732208c4f0f7c31954866431f9178354f4c92a6
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Youngmin Nam [Thu, 26 Jul 2018 03:40:36 +0000 (12:40 +0900)]
[9610][WING] arm64: dts: remove ERD board dtbo config
Change-Id: Icfa1cbe0a0bbdfd8a0359acc60152694e85800dc
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Youngmin Nam [Wed, 25 Jul 2018 05:25:42 +0000 (14:25 +0900)]
[9610] arm64: dts: create dtbo image
Change-Id: I072da53b9b54b22ba44069e11e2af2e9d000abe1
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Youngmin Nam [Wed, 25 Jul 2018 05:26:37 +0000 (14:26 +0900)]
[9610][WING] arm64: dts: enable dtbo overlay to make dtbo image
Change-Id: I196924b37c8b7482262cff47851b91625d5bb8d5
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Thu, 19 Jul 2018 10:53:10 +0000 (18:53 +0800)]
CS35L41: Disable Smart PA driver
[9609] Disable SPA driver
Bug:HQ00000000
Workaround:no
Change-Id: If396238631e7ddc99289cd46ba30b5ff26de12e2
Signed-off-by: Shinhyung Kang<s47.kang@samsung.com>
lijilai [Thu, 19 Jul 2018 10:52:06 +0000 (18:52 +0800)]
CS35L41: Smart PA driver
[CS35L41] Added SPA driver
Bug:HQ00000000
Workaround:no
Change-Id: I5d7232539dbd7b9ff97765e4d709e16165916a22
Signed-off-by: Shinhyung Kang<s47.kang@samsung.com>
lijilai [Thu, 19 Jul 2018 10:50:03 +0000 (18:50 +0800)]
abox: bring up the audio
[9609][WING] abox: bring up the audio
Bug:HQ00000000
Workaround:no
Change-Id: I4f7e317bf0dac9365809b1b445676c562e518251
Signed-off-by: Shinhyung Kang<s47.kang@samsung.com>
lijilai [Wed, 18 Jul 2018 06:59:17 +0000 (15:59 +0900)]
BSP: disable sd card detect pin pull up
[9609][WING] arm64: dts: disable sd card detect pin pull up
Bug:HQ00000000
Workaround:no
Change-Id: Ie0b5a449143291ffadb8e23c7312b18eda279ef0
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Wed, 18 Jul 2018 02:59:16 +0000 (10:59 +0800)]
BSP: WIFI BT control pin is chaged from I2C to GPIO pin
[9609][WING] arm64: dts: WIFI BT control pin is chaged from I2C to GPIO pin
Bug:HQ00000000
Workaround:no
Signed-off-by: youngss.kim <youngss.kim@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
Change-Id: I4b741d07880ac640c2e7c444dedc8480da4aa7ec
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 17 Jul 2018 03:10:26 +0000 (11:10 +0800)]
BSP: IFPMIC Flash led driver
[9609][WING] Flash led driver
Bug:HQ00000000
Workaround:no
Change-Id: I2b49faec49ac6fe223a9f4cbcacafdca4cf380aa
Signed-off-by: Jinchul Kim <jinchul7.kim@samsung.com>
Signed-off-by: Keunho Hwang <keunho.hwang@samsung.com>
lijilai [Tue, 17 Jul 2018 02:19:10 +0000 (10:19 +0800)]
BSP: Unnecessary code is removed at panel reset
[9609][WING] fbdev: dpu: Unnecessary code is removed at panel reset
Bug:HQ00000000
Workaround:no
Change-Id: I2a1e2a075e2d12c252f3d1de8966918ae879d39d
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 16 Jul 2018 08:30:32 +0000 (16:30 +0800)]
BSP: NT36672A cabc mode config is added
[9609][WING] arm64: configs: NT35572A cabc mode config is added
Bug:HQ00000000
Workaround:no
Change-Id: I115fcb4233ade40410751fb632469838c2fa6eb2
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 16 Jul 2018 08:28:59 +0000 (16:28 +0800)]
BSP: NT36672A cabc mode control is added
[9609][WING] fbdev: dpu: NT35572A cabc mode control is added
Bug:HQ00000000
Workaround:no
Change-Id: Ic0e3d46e2ae0f23203254c31c52b5cccc3936544
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 16 Jul 2018 07:32:20 +0000 (15:32 +0800)]
BSP: IFPMIC Haptic device driver
[9609][WING] drivers: Haptic device driver for HW
Bug:HQ00000000
Workaround:no
Change-Id: I505807b054e99adac17b17abe109ee039c9d5d85
Signed-off-by: Jinchul Kim <jinchul7.kim@samsung.com>
lijilai [Mon, 16 Jul 2018 07:08:10 +0000 (16:08 +0900)]
BSP: disable synaptics touch
[9609][WING] arm64: config: disable synaptics touch
Bug:HQ00000000
Workaround:no
Change-Id: I4d5a30793c0f8856b3d3378673a5c803d5500958
Signed-off-by: Youngmin.nam <youngmin.nam@samsung.com>
lijilai [Fri, 13 Jul 2018 10:02:41 +0000 (18:02 +0800)]
BSP: IFPMIC check S2MCS02 with PDTA
[9609][WING] drivers: check S2MCS02 with PDTA
it need to adjust input/charging current
Bug:HQ00000000
Workaround:no
Change-Id: Iddc58c3a96cc8dba82979b6c2da80344a32714f3
Signed-off-by: Jinchul Kim <jinchul7.kim@samsung.com>
lijilai [Sat, 14 Jul 2018 03:43:44 +0000 (11:43 +0800)]
BSP: change USB maximum speed as "high-speed"
[9609][WING] arm64: dts: change USB maximum speed as "high-speed"
Bug:HQ00000000
Workaround:no
Change-Id: Ifa55e568ff3c994e73e101d1adc5ec6322acae5c
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Fri, 13 Jul 2018 03:31:09 +0000 (12:31 +0900)]
BSP: run savedefconfig
[9609][WING] arm64: configs: run savedefconfig
Bug:HQ00000000
Workaround:no
Change-Id: If1ec0381a11ec779ee7478855c39c5c443b86708
Signed-off-by: Youngmin.nam <youngmin.nam@samsung.com>
lijilai [Tue, 10 Jul 2018 04:24:19 +0000 (12:24 +0800)]
BSP: NT36672A panel config is added
[9609][WING] arm64: configs: NT36672A panel config is added
Bug:HQ00000000
Workaround:no
Change-Id: Id6c62a41e6e56e7cd1b86a3fd13747e8f2fbbbe9
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 03:29:57 +0000 (11:29 +0800)]
BSP: NT36672A panel driver files is added
[9609][WING] fbdev: dpu: NT36672A panel files is added
Bug:HQ00000000
Workaround:no
Change-Id: I021459610d5f805e74aeed72ddc3c2d1496075b4
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 01:31:40 +0000 (09:31 +0800)]
BSP: NT36672A panel infomation is added
[9609][WING] arm64: dts: NT36672A panel information is added
Bug:HQ00000000
Workaround:no
Change-Id: Ia971201133a08c97c43fed2bbd3eed6d45d21574
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Thu, 12 Jul 2018 02:29:29 +0000 (10:29 +0800)]
BSP: enable USB3.0 PHY isolation
[9609][WING] arm64: dts: enable USB3.0 PHY isolation
Bug:HQ00000000
Workaround:no
Change-Id: I779e951e133ec87c8c198f2e5d50f73f4b2deb11
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Wed, 11 Jul 2018 08:58:11 +0000 (16:58 +0800)]
BSP: dts config for battery
[9609][WING] arm64: dts: dts config for battery
Bug:HQ00000000
Workaround:no
Change-Id: I528975a8cc18394c7a9b598aa60febc8fecabfce
Signed-off-by: Jinchul Kim <jinchul7.kim@samsung.com>
lijilai [Wed, 11 Jul 2018 04:25:15 +0000 (12:25 +0800)]
BSP: disable related audio codec dt node temporarily
[9609][WING] arm64: dts: disable related audio codec dt node temporarily
Bug:HQ00000000
Workaround:no
Change-Id: I75bae711e9788ddaa328e8129d24ab2726ce7742
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Wed, 11 Jul 2018 04:21:17 +0000 (12:21 +0800)]
BSP: disable related fimc dt node temporarily
[9609][WING] arm64: dts: disable related fimc temporarily
Bug:HQ00000000
Workaround:no
Change-Id: If36407d396e1a5bf5f9af62016c186fef55dac13
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Wed, 11 Jul 2018 06:20:15 +0000 (14:20 +0800)]
BSP: fix usbpd dt error msg
[9609][wing] ifpmic : fix usbpd dt error msg
Bug:HQ00000000
Workaround:no
Change-Id: I709353862157ad9ae18a66198693aa78031fe393
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Wed, 11 Jul 2018 02:07:41 +0000 (10:07 +0800)]
BSP: fix usbpd build error
[9609][wing] ifpmic : fix usbpd build error
Bug:HQ00000000
Workaround:no
Change-Id: Ieadb5661958472d05535b3834e2df780f37614c3
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 13:28:06 +0000 (21:28 +0800)]
BSP: remove unused gpio pin
[9609][wing] ifpmic : remove unused gpio pin
Bug:HQ00000000
Workaround:no
Change-Id: I260a6d4d552d11021f9e8d36fa09d3d1eb2e4091
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 9 Jul 2018 09:05:44 +0000 (17:05 +0800)]
BSP: add s2mu106 ifpmic driver
[9609][wing] ifpmic : add s2mu106 ifpmic driver
Bug:HQ00000000
Workaround:no
Change-Id: I186aaa9a3b83d421addb8c0310621b7d7e05afbb
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 06:10:52 +0000 (14:10 +0800)]
BSP: add pinctrl for touch vdd
[9609][WING] arm64: dts: add pinctrl for touch vdd
Bug:HQ00000000
Workaround:no
Change-Id: I2fa1de9cb97315808e7a1f7748a91ff10559953b
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Tue, 10 Jul 2018 06:08:24 +0000 (14:08 +0800)]
BSP: enable nt36xxx touch driver
[9609][WING] touch: enable nt36xxx touch driver
Bug:HQ00000000
Workaround:no
Change-Id: I57acc6af84c0aa2391636247aba1d0815956a0ac
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
lijilai [Tue, 10 Jul 2018 03:51:26 +0000 (11:51 +0800)]
BSP: remove unused pmic node
[9609][WING] arm64: des: remove unused pmic node
Bug:HQ00000000
Workaround:no
Change-Id: I72099b19985324924ea0ab61a93c0ab5026ed73a
Signed-off-by: lijilai <lijilai@huaqin.com>
Signed-off-by: jinchul7.kim <jinchul7.kim@samsung.com>
lijilai [Tue, 10 Jul 2018 02:53:16 +0000 (10:53 +0800)]
BSP: remove sound dt node temporarily
[9609][WING] arm64: dts: remove sound dt node temporarily
Bug:HQ00000000
Workaround:no
Change-Id: Ied3482df39f7895f8e5694163d45a00cf3bfb73e
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 02:11:59 +0000 (10:11 +0800)]
BSP: add nt36xxx touch device tree node
[9609][WING] arm64: dts: add nt36xxx touch device tree node
Bug:HQ00000000
Workaround:no
Change-Id: I3507930cbaa6c15daf729c08d8de68128c0be7ec
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Tue, 10 Jul 2018 02:10:38 +0000 (10:10 +0800)]
BSP: add nt36xxx touch driver
[9609][WING] touch: add nt36xxx touch driver
Bug:HQ00000000
Workaround:no
Change-Id: I2364fb4f434aae658ff3196b4ff5858fe1daa39c
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 9 Jul 2018 09:34:24 +0000 (17:34 +0800)]
BSP: remove i2c_3 node for wing board
[9609][WING] arm64: dts: remove i2c_3 node for wing board
Bug:HQ00000000
Workaround:no
Change-Id: I2f9da3d411a915b3bb546794b0d0ddedc6e3bf28
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 9 Jul 2018 08:58:16 +0000 (16:58 +0800)]
BSP: change USI mode for wing board
[9609][WING] arm64: dts: change for wing board
Bug:HQ00000000
Workaround:no
Change-Id: Ie5c19d0433354ef61585fed4154c0da2208456ed
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 9 Jul 2018 07:12:03 +0000 (15:12 +0800)]
BSP: add initial board dts for wing board
[9609][WING] arm64: dts: add initial board dts for wing board <youngmin.nam@samsung.com>
Bug:HQ00000000
Wrkaround:no
Change-Id: I5500c8867c6fb2fd60e5a0f0714cf404b763a22e
Signed-off-by: lijilai <lijilai@huaqin.com>
lijilai [Mon, 9 Jul 2018 07:05:50 +0000 (15:05 +0800)]
BSP: add initial defconfig for wing board
[9610][WING] arm64: configs: add initial defconfig for wing board <youngmin.nam@samsung.com>
Bug:HQ00000000
Workaround:no
Change-Id: I50b24875280bfcef4d40a712589a6004a49c8a35
Signed-off-by: lijilai <lijilai@huaqin.com>
Daniel Rosenberg [Fri, 20 Jul 2018 23:11:40 +0000 (16:11 -0700)]
ANDROID: sdcardfs: Change current->fs under lock
Adjusted from previous version to add missing include
bug:
111641492
Change-Id: I321d83f5d599efb3abdfaf2f3a4900ac512beca6
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Todd Kjos [Wed, 3 Oct 2018 20:50:58 +0000 (13:50 -0700)]
Revert "ANDROID: sdcardfs: Change current->fs under lock"
This reverts commit
1e6b0ff01fc5cb2701734de69a93fb1c42d894b5.
Change-Id: Ie3ab446da93fb1cea37078addd261a1c3b863237
Jia Lee [Thu, 31 Oct 2019 01:31:29 +0000 (10:31 +0900)]
[RAMEN9610-20799][ERD][9610] nfc: add config to control ldo37
Change-Id: I493d248552459c7b0eef5f2a14ee0fff44b35967
Signed-off-by: Jia Lee <jia0515.lee@samsung.com>
Jia Lee [Wed, 30 Oct 2019 09:01:32 +0000 (18:01 +0900)]
[RAMEN9610-20799][ERD][NEUS7920-623] [NEUS7920-263][9610] nfc: control nfc pvdd for low power mode
nfc pvdd should be low during phone off and USB charging mode.
Change-Id: I31aed59395e06d031895ad7cc2a4b82eccc75bd3
Signed-off-by: Jia Lee <jia0515.lee@samsung.com>
Jiyoung Jeong [Wed, 30 Oct 2019 13:34:35 +0000 (22:34 +0900)]
[RAMEN9610-20797][COMMON][MODAP-49152] misc: modem_if: fix the problem of free duplication
Change-Id: I83078bc3d9c44fac80ee56ab43f38b0ffb5fbe12
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>
Wonchul Shin [Mon, 28 Oct 2019 01:51:39 +0000 (10:51 +0900)]
[RAMEN9610-20794][nfc] Remove wake_lock
Change-Id: Ib608c39ab9a96488b067fc8951ac03dc18534992
Signed-off-by: Wonchul Shin <wchuls.shin@samsung.com>
Yoojin Park [Sat, 19 Oct 2019 07:26:10 +0000 (16:26 +0900)]
[RAMEN9610-20778][9610] drivers: enable LEGACY_COMPAT after applying ion flushing patch
Change-Id: I1cfb9953f4b99c2d56e585cc6fe9d9c6ce91e639
Signed-off-by: Yoojin Park <yoojin1.park@samsung.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log