staging: rtl8192e: fix potential use after free

commit b7aa39a2ed0112d07fc277ebd24a08a7b2368ab9 upstream.

The variable skb is released via kfree_skb() when the return value of
_rtl92e_tx is not zero. However, after that, skb is accessed again to
read its length, which may result in a use after free bug. This patch
fixes the bug by moving the release operation to where skb is never
used later.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1572965351-6745-1-git-send-email-bianpan2016@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: at91: fix update bit maps on CFG_MOR write

commit 263eaf8f172d9f44e15d6aca85fe40ec18d2c477 upstream.

The regmap update bits call was not selecting the proper mask, considering
the bits which was updating.
Update the mask from call to also include OSCBYPASS.
Removed MOSCEN which was not updated.

Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, gup: add missing refcount overflow checks on x86 and s390

The mainline commit 8fde12ca79af ("mm: prevent get_user_pages() from
overflowing page refcount") was backported to 4.9.y stable as commit
2ed768cfd895. The backport however missed that in 4.9, there are several
arch-specific gup.c versions with fast gup implementations, so these do not
prevent refcount overflow.

This is partially fixed for x86 in stable-only commit d73af79742e7 ("x86, mm,
gup: prevent get_page() race with munmap in paravirt guest"). This stable-only
commit adds missing parts to x86 version, as well as s390 version, both taken
from the SUSE SLES/openSUSE 4.12-based kernels.

The remaining architectures with own gup.c are sparc, mips, sh. It's unlikely
the known overflow scenario based on FUSE, which needs 140GB of RAM, is a
problem for those architectures, and I don't feel confident enough to patch
them.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: Remove a debug trace in mtdpart.c

[ Upstream commit bda2ab56356b9acdfab150f31c4bac9846253092 ]

Commit 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") contained
a leftover of the debug session that led to this bug fix. Remove this
pr_info().

Fixes: 2b6f0090a333 ("mtd: Check add_mtd_device() ret code")
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property()

[ Upstream commit efa9ace68e487ddd29c2b4d6dd23242158f1f607 ]

In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup().
kstrdup() may return NULL, so it should be checked and handle error.
And prop should be freed if 'prop->name' is NULL.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: Check SMP PHY control function result

[ Upstream commit 01929a65dfa13e18d89264ab1378854a91857e59 ]

Currently the SMP PHY control execution result is checked, however the
function result for the command is not.

As such, we may be missing all potential errors, like SMP FUNCTION FAILED,
INVALID REQUEST FRAME LENGTH, etc., meaning the PHY control request has
failed.

In some scenarios we need to ensure the function result is accepted, so add
a check for this.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / APEI: Switch estatus pool to use vmalloc memory

[ Upstream commit 0ac234be1a9497498e57d958f4251f5257b116b4 ]

The ghes code is careful to parse and round firmware's advertised
memory requirements for CPER records, up to a maximum of 64K.
However when ghes_estatus_pool_expand() does its work, it splits
the requested size into PAGE_SIZE granules.

This means if firmware generates 5K of CPER records, and correctly
describes this in the table, __process_error() will silently fail as it
is unable to allocate more than PAGE_SIZE.

Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory
may fault and be fixed up by vmalloc_fault(). To prevent this call
vmalloc_sync_all() before an NMI handler could discover the memory.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: Support SATA PHY connection rate unmatch fixing during discovery

[ Upstream commit cec9771d2e954650095aa37a6a97722c8194e7d2 ]

   +----------+             +----------+
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |initiator |             |          |
   | device   |--- 3.0 G ---| Expander |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   |          |             |          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   +----------+             +----------+

According to Serial Attached SCSI - 1.1 (SAS-1.1):
If an expander PHY attached to a SATA PHY is using a physical link rate
greater than the maximum connection rate supported by the pathway from an
STP initiator port, a management application client should use the SMP PHY
CONTROL function (see 10.4.3.10) to set the PROGRAMMED MAXIMUM PHYSICAL
LINK RATE field of the expander PHY to the maximum connection rate
supported by the pathway from that STP initiator port.

Currently libsas does not support checking if this condition occurs, nor
rectifying when it does.

Such a condition is not at all common, however it has been seen on some
pre-silicon environments where the initiator PHY only supports a 1.5 Gbit
maximum linkrate, mated with 12G expander PHYs and 3/6G SATA phy.

This patch adds support for checking and rectifying this condition during
initial device discovery only.

We do support checking min pathway connection rate during revalidation phase,
when new devices can be detected in the topology. However we do not
support in the case of the the user reprogramming PHY linkrates, such that
min pathway condition is not met/maintained.

A note on root port PHY rates:
The libsas root port PHY rates calculation is broken. Libsas sets the
rates (min, max, and current linkrate) of a root port to the same linkrate
of the first PHY member of that same port. In doing so, it assumes that
all other PHYs which subsequently join the port to have the same
negotiated linkrate, when they could actually be different.

In practice this doesn't happen, as initiator and expander PHYs are
normally initialised with consistent min/max linkrates.

This has not caused an issue so far, so leave alone for now.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Fix NULL dereference bug in match_hid_uid

[ Upstream commit bb6bccba390c7d743c1e4427de4ef284c8cc6869 ]

Add a non-NULL check to fix potential NULL pointer dereference
Cleanup code to call function once.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 2bf9a0a12749b ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dev: Use unsigned integer as an argument to left-shift

[ Upstream commit f4d7b3e23d259c44f1f1c39645450680fcd935d6 ]

1 << 31 is Undefined Behaviour according to the C standard.
Use U type modifier to avoid theoretical overflow.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: don't compare hb_timer expire date before starting it

[ Upstream commit d1f20c03f48102e52eb98b8651d129b83134cae4 ]

hb_timer might not start at all for a particular transport because its
start is conditional. In a result a node is not sending heartbeats.

Function sctp_transport_reset_hb_timer has two roles:
    - initial start of hb_timer for a given transport,
    - update expire date of hb_timer for a given transport.
The function is optimized to update timer's expire only if it is before
a new calculated one but this comparison is invalid for a timer which
has not yet started. Such a timer has expire == 0 and if a new expire
value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will
fail and timer will not start resulting in no heartbeat packets send by
the node.

This was found when association was initialized within first 5 mins
after system boot due to jiffies init value which is near to MAX_JIFFIES.

Test kernel version: 4.9.154 (ARCH=arm)
hb_timer.expire = 0;                //initialized, not started timer
new_expire = MAX_JIFFIES / 2 + 2;   //or more
time_before(hb_timer.expire, new_expire) == false

Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Reported-by: Marcin Stojek <marcin.stojek@nokia.com>
Tested-by: Marcin Stojek <marcin.stojek@nokia.com>
Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix possible overflow in __sk_mem_raise_allocated()

[ Upstream commit 5bf325a53202b8728cf7013b72688c46071e212e ]

With many active TCP sockets, fat TCP sockets could fool
__sk_mem_raise_allocated() thanks to an overflow.

They would increase their share of the memory, instead
of decreasing it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: initialise found bitmap in efx_ef10_mtd_probe

[ Upstream commit c65285428b6e7797f1bb063f33b0ae7e93397b7b ]

The bitmap of found partitions in efx_ef10_mtd_probe was not
initialised, causing partitions to be suppressed based off whatever
value was in the bitmap at the start.

Fixes: 3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix skb may be leaky in tipc_link_input

[ Upstream commit 7384b538d3aed2ed49d3575483d17aeee790fb06 ]

When we free skb at tipc_data_input, we return a 'false' boolean.
Then, skb passed to subcalling tipc_link_input in tipc_link_rcv,

<snip>
1303 int tipc_link_rcv:
...
1354    if (!tipc_data_input(l, skb, l->inputq))
1355        rc |= tipc_link_input(l, skb, l->inputq);
</snip>

Fix it by simple changing to a 'true' boolean when skb is being free-ed.
Then, tipc_link_rcv will bypassed to subcalling tipc_link_input as above
condition.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <maloy@donjonn.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

decnet: fix DN_IFREQ_SIZE

[ Upstream commit 50c2936634bcb1db78a8ca63249236810c11a80f ]

Digging through the ioctls with Al because of the previous
patches, we found that on 64-bit decnet's dn_dev_ioctl()
is wrong, because struct ifreq::ifr_ifru is actually 24
bytes (not 16 as expected from struct sockaddr) due to the
ifru_map and ifru_settings members.

Clearly, decnet expects the ioctl to be called with a struct
like
  struct ifreq_dn {
    char ifr_name[IFNAMSIZ];
    struct sockaddr_dn ifr_addr;
  };

since it does
  struct ifreq *ifr = ...;
  struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr;

This means that DN_IFREQ_SIZE is too big for what it wants on
64-bit, as it is
  sizeof(struct ifreq) - sizeof(struct sockaddr) +
  sizeof(struct sockaddr_dn)

This assumes that sizeof(struct sockaddr) is the size of ifr_ifru
but that isn't true.

Fix this to use offsetof(struct ifreq, ifr_ifru).

This indeed doesn't really matter much - the result is that we
copy in/out 8 bytes more than we should on 64-bit platforms. In
case the "struct ifreq_dn" lands just on the end of a page though
it might lead to faults.

As far as I can tell, it has been like this forever, so it seems
very likely that nobody cares.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel

[ Upstream commit d71b57532d70c03f4671dd04e84157ac6bf021b0 ]

ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24

Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst

With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe

[ Upstream commit 3366463513f544c12c6b88c13da4462ee9e7a1a1 ]

Use a bitmap to keep track of which partition types we've already seen;
 for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
 thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
 sfc NICs.  Prior to this patch they cause sysfs_warn_dup errors because
 they have the same name, causing us not to expose any MTDs at all.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/core/neighbour: fix kmemleak minimal reference count for hash tables

[ Upstream commit 01b833ab44c9e484060aad72267fc7e71beb559b ]

This should be 1 for normal allocations, 0 disables leak reporting.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: 85704cb8dcfd ("net/core/neighbour: tell kmemleak about hash tables")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/core/neighbour: tell kmemleak about hash tables

[ Upstream commit 85704cb8dcfd88d351bfc87faaeba1c8214f3177 ]

This fixes false-positive kmemleak reports about leaked neighbour entries:

unreferenced object 0xffff8885c6e4d0a8 (size 1024):
  comm "softirq", pid 0, jiffies 4294922664 (age 167640.804s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff  ........ ,......
    08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00  ..._......}.....
  backtrace:
    [<00000000748509fe>] ip6_finish_output2+0x887/0x1e40
    [<0000000036d7a0d8>] ip6_output+0x1ba/0x600
    [<0000000027ea7dba>] ip6_send_skb+0x92/0x2f0
    [<00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0
    [<000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0
    [<000000004bd5fa90>] sock_sendmsg+0xb3/0xf0
    [<000000008227b29f>] ___sys_sendmsg+0x745/0x8f0
    [<000000008698009d>] __sys_sendmsg+0xde/0x170
    [<00000000889dacf1>] do_syscall_64+0x9b/0x400
    [<0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000005767ed39>] 0xffffffffffffffff

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix memory leak in tipc_nl_compat_publ_dump

[ Upstream commit f87d8ad9233f115db92c6c087d58403b0009ed36 ]

There is a memory leak in case genlmsg_put fails.

Fix this by freeing *args* before return.

Addresses-Coverity-ID: 1476406 ("Resource leak")
Fixes: 46273cf7e009 ("tipc: fix a missing check of genlmsg_put")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: Check add_mtd_device() ret code

[ Upstream commit 2b6f0090a3335b7bdd03ca520c35591159463041 ]

add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/genalloc.c: include vmalloc.h

[ Upstream commit 35004f2e55807a1a1491db24ab512dd2f770a130 ]

Fixes build break on most ARM/ARM64 defconfigs:

  lib/genalloc.c: In function 'gen_pool_add_virt':
  lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'?
  lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  lib/genalloc.c: In function 'gen_pool_destroy':
  lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'?

Fixes: 6862d2fc8185 ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap')
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/base/platform.c: kmemleak ignore a known leak

[ Upstream commit 967d3010df8b6f6f9aa95c198edc5fe3646ebf36 ]

unreferenced object 0xffff808ec6dc5a80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
  hex dump (first 32 bytes):
    ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  ........kkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
    [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
    [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
    [<00000000ef135642>] acpi_default_enumeration+0x34/0x78
    [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000002968643e>] acpi_bus_scan+0xb0/0x110
    [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
    [<00000000965b3c5a>] acpi_init+0x408/0x49c
    [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
    [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
    [<0000000070ea6c15>] kernel_init+0x18/0x138
    [<00000000fb8fff06>] ret_from_fork+0x10/0x1c
    [<0000000041273a0d>] 0xffffffffffffffff

Then, faddr2line pointed out this line,

/*
 * This memory isn't freed when the device is put,
 * I don't have a nice idea for that though.  Conceptually
 * dma_mask in struct device should not be a pointer.
 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
 */
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);

Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.

Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/genalloc.c: use vzalloc_node() to allocate the bitmap

[ Upstream commit 6862d2fc81859f88c1f3f660886427893f2b4f3f ]

Some devices may have big memory on chip, such as over 1G.  In some
cases, the nbytes maybe bigger then 4M which is the bounday of the
memory buddy system (4K default).

So use vzalloc_node() to allocate the bitmap.  Also use vfree to free
it.

Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk

[ Upstream commit 52fbf1134d479234d7e64ba9dcbaea23405f229e ]

gen_pool_alloc_algo() uses different allocation functions implementing
different allocation algorithms.  With gen_pool_first_fit_align()
allocation function, the returned address should be aligned on the
requested boundary.

If chunk start address isn't aligned on the requested boundary, the
returned address isn't aligned too.  The only way to get properly
aligned address is to initialize the pool with chunks aligned on the
requested boundary.  If want to have an ability to allocate buffers
aligned on different boundaries (for example, 4K, 1MB, ...), the chunk
start address should be aligned on the max possible alignment.

This happens because gen_pool_first_fit_align() looks for properly
aligned memory block without taking into account the chunk start address
alignment.

To fix this, we provide chunk start address to
gen_pool_first_fit_align() and change its implementation such that it
starts looking for properly aligned block with appropriate offset
(exactly as is done in CMA).

Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com
Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.com
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n

[ Upstream commit 8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 ]

Commit fa5e084e43eb ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim().  The original return value 0 means NODE_RECLAIM_SOME
after this commit.

While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed.  This will leads to call zone_watermark_ok() again.

This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.

Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: clear journal dirty flag after shutdown journal

[ Upstream commit d85400af790dba2aa294f0a77e712f166681f977 ]

Dirty flag of the journal should be cleared at the last stage of umount,
if do it before jbd2_journal_destroy(), then some metadata in uncommitted
transaction could be lost due to io error, but as dirty flag of journal
was already cleared, we can't find that until run a full fsck.  This may
cause system panic or other corruption.

Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()

[ Upstream commit 40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]

This patch fixes potential double frees if register_hdlc_device() fails.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix a missing check of genlmsg_put

[ Upstream commit 46273cf7e009231d2b6bc10a926e82b8928a9fb2 ]

genlmsg_put could fail. The fix inserts a check of its return value, and
if it fails, returns -EMSGSIZE.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atl1e: checking the status of atl1e_write_phy_reg

[ Upstream commit ff07d48d7bc0974d4f96a85a4df14564fb09f1ef ]

atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: bcm_sf2: Propagate error value from mdio_write

[ Upstream commit e49505f7255be8ced695919c08a29bf2c3d79616 ]

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmicro: fix a missing check of clk_prepare

[ Upstream commit f86a3b83833e7cfe558ca4d70b64ebc48903efec ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Make GCOV depend on !KCOV

[ Upstream commit 550ed0e2036663b35cec12374b835444f9c60454 ]

Both do more or less the same thing and are mutually exclusive.
If both are enabled the build will fail.
Sooner or later we can kill UML's GCOV.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/net_namespace: Check the return value of register_pernet_subsys()

[ Upstream commit 0eb987c874dc93f9c9d85a6465dbde20fdd3884c ]

In net_ns_init(), register_pernet_subsys() could fail while registering
network namespace subsystems. The fix checks the return value and
sends a panic() on failure.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: clps711x: Fix period calculation

[ Upstream commit b0f17570b8203c22f139459c86cfbaa0311313ed ]

Commit e39c0df1be5a ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxc-scc - fix build warnings on ARM64

[ Upstream commit 2326828ee40357b3d2b1359b8ca7526af201495b ]

The following build warnings are seen when building for ARM64 allmodconfig:

drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Fix them by using the %zu specifier to print a size_t variable and using
a plain %x to print the result of a readl().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix node leak in update_lmb_associativity_index()

[ Upstream commit 47918bc68b7427e961035949cc1501a864578a69 ]

In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/83xx: handle machine check caused by watchdog timer

[ Upstream commit 0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]

When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.

This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65910: fix a missing check of return value

[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: fix print_st_err()'s prototype to match the definition

[ Upstream commit 2c38f035117331eb78d0504843c79ea7c7fabf37 ]

print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.

Fix this by using 'enum drbd_state_rv' in the prototype too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: do not block when adjusting "disk-options" while IO is frozen

[ Upstream commit f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]

"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.

When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.

If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).

Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: reject attach of unsuitable uuids even if connected

[ Upstream commit fe43ed97bba3b11521abd934b83ed93143470e4f ]

Multiple failure scenario:
a) all good
   Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
   Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
   changes only make it to the Secondary storage.
d) lose disk on Secondary,
   Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: ignore "all zero" peer volume sizes in handshake

[ Upstream commit 94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
 - I don't have a current size myself
 - we agree on the size anyways
 - I do have a current size, am Secondary, and he has the only disk
 - I do have a current size, am Primary, and he has the only disk,
   which is larger than my current size

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status

[ Upstream commit c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]

The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.

This initializes pcierr and fstate to zero in all call sites.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/spapr_tce: Get rid of possible infinite loop

[ Upstream commit 517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]

As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.

This makes the loop finite and prints a warning on every failure to make
the code more bug prone.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/44x/bamboo: Fix PCI range

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Make NULL pointer deferences explicit on bad page faults.

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/prom: fix early DEBUG messages

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath6kl: Fix off by one error in scan completion

[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]

When ath6kl was reworked to share code between regular and scheduled scans
in commit 3b8ffc6a22ba ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.

Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath6kl: Only use match sets when firmware supports it

[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]

Commit dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.

Fixes: dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: csiostor: fix incorrect dma device in case of vport

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: deadlock by configfs_depend_item

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a82d51
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.

Signed-off-by: Anatoliy Glagolev <glagolig@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layer

[ Upstream commit 2ee00f6a98c36f7e4ba07cc33f24cc5a69060cc9 ]

This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: Fix broken paths to arch/or32

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]

OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: max310x: Fix tx_empty() callback

[ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ]

Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/regulator: fix a missing check of return value

[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]

If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xmon: fix dump_segments()

[ Upstream commit 32c8c4c621897199e690760c2d57054f8b84b6e6 ]

mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[ Upstream commit e93ba1b7eb5b188c749052df7af1c90821c5f320 ]

This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/qib: Fix an error code in qib_sdma_verbs_send()

[ Upstream commit 5050ae5fa3d54c8e83e1e447cc7e3591110a7f57 ]

We accidentally return success on this error path.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: Fix bulkstat compat ioctls on x32 userspace.

[ Upstream commit 7ca860e3c1a74ad6bd8949364073ef1044cad758 ]

The bulkstat family of ioctls are problematic on x32, because there is
a mixup of native 32-bit and 64-bit conventions.  The xfs_fsop_bulkreq
struct contains pointers and 32-bit integers so that matches the native
32-bit layout, and that means the ioctl implementation goes into the
regular compat path on x32.

However, the 'ubuffer' member of that struct in turn refers to either
struct xfs_inogrp or xfs_bstat (or an array of these).  On x32, those
structures match the native 64-bit layout.  The compat implementation
writes out the 32-bit version of these structures.  This is not the
expected format for x32 userspace, causing problems.

Fortunately the functions which actually output these xfs_inogrp and
xfs_bstat structures have an easy way to select which output format
is required, so we just need a little tweak to select the right format
on x32.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: Align compat attrlist_by_handle with native implementation.

[ Upstream commit c456d64449efe37da50832b63d91652a85ea1d20 ]

While inspecting the ioctl implementations, I noticed that the compat
implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the
same thing as the native implementation.  Specifically, the "cursor"
does not appear to be written out to userspace on the compat path,
like it is on the native path.

This adjusts the compat implementation to copy out the cursor just
like the native implementation does.  The attrlist cursor does not
require any special compat handling.  This fixes xfstests xfs/269
on both IA-32 and x32 userspace, when running on an amd64 kernel.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: 0facef7fb053b ("xfs: in _attrlist_by_handle, copy the cursor back to userspace")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: take jdata unstuff into account in do_grow

[ Upstream commit bc0205612bbd4dd4026d4ba6287f5643c37366ec ]

Before this patch, function do_grow would not reserve enough journal
blocks in the transaction to unstuff jdata files while growing them.
This patch adds the logic to add one more block if the file to grow
is jdata.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm flakey: Properly corrupt multi-page bios.

[ Upstream commit a00f5276e26636cbf72f24f79831026d2e2868e7 ]

The flakey target is documented to be able to corrupt the Nth byte in
a bio, but does not corrupt byte indices after the first biovec in the
bio. Change the corrupting function to actually corrupt the Nth byte
no matter in which biovec that index falls.

A test device generating two-page bios, atop a flakey device configured
to corrupt a byte index on the second page, verified both the failure
to corrupt before this patch and the expected corruption after this
change.

Signed-off-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: doc: fix wrong data structure reference for UHID_OUTPUT

[ Upstream commit 46b14eef59a8157138dc02f916a7f97c73b3ec53 ]

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10

[ Upstream commit 054f2400f706327f96770219c3065b5131f8f154 ]

Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.

Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration

[ Upstream commit 1b99d0c80bbe1810572c2cb77b90f67886adfa8d ]

The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.

The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.

Fixes: a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: unregister debug feature on failing arch init

[ Upstream commit 308c3e6673b012beecb96ef04cc65f4a0e7cdd99 ]

Make sure the debug feature and its allocated resources get
released upon unsuccessful architecture initialization.

A related indication of the issue will be reported as kernel
message.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181130143215.69496-2-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Continue driver initialization despite debugfs failure

[ Upstream commit 199fa087dc6b503baad06712716fac645a983e8a ]

The failure to create debugfs entry is unpleasant event, but not enough
to abort drier initialization. Align the mlx5_core code to debugfs design
and continue execution whenever debugfs_create_dir() successes or not.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: xway: fix gpio-hog related boot issues

[ Upstream commit 9b4924da4711674e62d97d4f5360446cc78337af ]

This patch is based on commit a86caa9ba5d7 ("pinctrl: msm: fix gpio-hog
related boot issues").

It fixes the issue that the gpio ranges needs to be defined before
gpiochip_add().

Therefore, we also have to swap the order of registering the pinctrl
driver and registering the gpio chip.

You also have to add the "gpio-ranges" property to the pinctrl device
node to get it finally working.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/pciback: Check dev_data before using it

[ Upstream commit 1669907e3d1abfa3f7586e2d55dbbc117b5adba2 ]

If pcistub_init_device fails, the release function will be called with
dev_data set to NULL.  Check it before using it to avoid a NULL pointer
dereference.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: intel-ish-hid: fixes incorrect error handling

[ Upstream commit 6e0856d317440a950b17c00a9283114f025e5699 ]

The memory chunk allocated by hid_allocate_device() should be released
by hid_destroy_device(), not kfree().

Fixes: 0b28cb4bcb1("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: only track ref_heads in delayed_ref_updates

[ Upstream commit 158ffa364bf723fa1ef128060646d23dc3942994 ]

We use this number to figure out how many delayed refs to run, but
__btrfs_run_delayed_refs really only checks every time we need a new
delayed ref head, so we always run at least one ref head completely no
matter what the number of items on it.  Fix the accounting to only be
adjusted when we add/remove a ref head.

In addition to using this number to limit the number of delayed refs
run, a future patch is also going to use it to calculate the amount of
space required for delayed refs space reservation.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET

[ Upstream commit 732774437ae01d9882e60314e303898e63c7f038 ]

The opcodes used by the controller when doing batched page prog should
be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the
default NFC_REG_WCMD_SET value matches the one we set in the driver
which explains why we didn't notice the problem.

Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

VSOCK: bind to random port for VMADDR_PORT_ANY

[ Upstream commit 8236b08cf50f85bbfaf48910a0b3ee68318b7c4b ]

The old code always starts from fixed port for VMADDR_PORT_ANY. Sometimes
when VMM crashed, there is still orphaned vsock which is waiting for
close timer, then it could cause connection time out for new started VM
if they are trying to connect to same port with same guest cid since the
new packets could hit that orphaned vsock. We could also fix this by doing
more in vhost_vsock_reset_orphans, but any way, it should be better to start
from a random local port instead of a fixed one.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB

[ Upstream commit c5510b8dafce5f3f5a039c9b262ebcae0092c462 ]

If CONFIG_GPOILIB is not set, the stub of gpio_to_desc() should return
the same type of error as regular version: NULL.  All the callers
compare the return value of gpio_to_desc() against NULL, so returned
ERR_PTR would be treated as non-error case leading to dereferencing of
error value.

Fixes: 79a9becda894 ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

microblaze: move "... is ready" messages to arch/microblaze/Makefile

[ Upstream commit 2e14f94cf4bc2f15ca5362e81ca3a987c79e3062 ]

To prepare for more fixes, move this to arch/microblaze/Makefile.
Otherwise, the same "... is ready" would be printed multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

microblaze: adjust the help to the real behavior

[ Upstream commit bafcc61d998c1ca18f556d92a0e95335ac68c7da ]

"make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
but it is not a real Make target. It does not work because Makefile
assumes "system.unstrip" is the name of DT.

$ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
  [ snip ]
make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'.  Stop.
make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
make: *** Waiting for unfinished jobs....

simpleImage.<dt> works like a phony target that generates multiple
images. Reflect the real behavior. I removed the DT directory path
information because it is already explained a few lines below.

While I am here, I deleted the redundant *_defconfig explanation.

The top-level Makefile caters to list available defconfig files:

  mmu_defconfig            - Build for mmu
  nommu_defconfig          - Build for nommu

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubi: Do not drop UBI device reference before using

[ Upstream commit e542087701f09418702673631a908429feb3eae0 ]

The UBI device reference is dropped but then the device is used as a
parameter of ubi_err. The bug is introduced in changing ubi_err's
behavior. The old ubi_err does not require a UBI device as its first
parameter, but the new one does.

Fixes: 32608703310 ("UBI: Extend UBI layer debug/messaging capabilities")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubi: Put MTD device after it is not used

[ Upstream commit b95f83ab762dd6211351b9140f99f43644076ca8 ]

The MTD device reference is dropped via put_mtd_device, however its
field ->index is read and passed to ubi_msg. To fix this, the patch
moves the reference dropping after calling ubi_msg.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: require both realtime inodes to mount

[ Upstream commit 64bafd2f1e484e27071e7584642005d56516cb77 ]

Since mkfs always formats the filesystem with the realtime bitmap and
summary inodes immediately after the root directory, we should expect
that both of them are present and loadable, even if there isn't a
realtime volume attached.  There's no reason to skip this if rbmino ==
NULLFSINO; in fact, this causes an immediate crash if the there /is/ a
realtime volume and someone writes to it.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtl818x: fix potential use after free

[ Upstream commit afbb1947db94eacc5a13302eee88a9772fb78935 ]

entry is released via usb_put_urb just after calling usb_submit_urb.
However, entry is used if the submission fails, resulting in a use after
free bug. The patch fixes this.

Signed-off-by: Pan Bian <bianpan2016@163.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: debugfs: correct histogram spacing, formatting

[ Upstream commit 4cb777c64e030778c569f605398d7604d8aabc0f ]

Currently, snippets of this file look like:

rx rates (in Mbps): 0=1M   1=2M2=5.5M  3=11M   4=6M   5=9M  6=12M
7=18M  8=24M  9=36M  10=48M  11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)
44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80)
...
noise_flr[--96dBm] = 22
noise_flr[--95dBm] = 149
noise_flr[--94dBm] = 9
noise_flr[--93dBm] = 2

We're missing some spaces, and we're adding a minus sign ('-') on values
that are already negative signed integers.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: fix potential NULL dereference and use after free

[ Upstream commit 1dcd9429212b98bea87fc6ec92fb50bf5953eb47 ]

There are two defects: (1) passing a NULL bss to
mwifiex_save_hidden_ssid_channels will result in NULL dereference,
(2) using bss after dropping the reference to it via cfg80211_put_bss.
To fix them, the patch moves the buggy code to the branch that bss is
not NULL and puts it before cfg80211_put_bss.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: user - support incremental algorithm dumps

[ Upstream commit 0ac6b8fb23c724b015d9ca70a89126e8d1563166 ]

CRYPTO_MSG_GETALG in NLM_F_DUMP mode sometimes doesn't return all
registered crypto algorithms, because it doesn't support incremental
dumps.  crypto_dump_report() only permits itself to be called once, yet
the netlink subsystem allocates at most ~64 KiB for the skb being dumped
to.  Thus only the first recvmsg() returns data, and it may only include
a subset of the crypto algorithms even if the user buffer passed to
recvmsg() is large enough to hold all of them.

Fix this by using one of the arguments in the netlink_callback structure
to keep track of the current position in the algorithm list.  Then
userspace can do multiple recvmsg() on the socket after sending the dump
request.  This is the way netlink dumps work elsewhere in the kernel;
it's unclear why this was different (probably just an oversight).

Also fix an integer overflow when calculating the dump buffer size hint.

Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / LPSS: Ignore acpi_device_fix_up_power() return value

[ Upstream commit 1a2fa02f7489dc4d746f2a15fb77b3ce1affade8 ]

Ignore acpi_device_fix_up_power() return value. If we return an error
we end up with acpi_default_enumeration() still creating a platform-
device for the device and we end up with the device still being used
but without the special LPSS related handling which is not useful.

Specicifically ignoring the error fixes the touchscreen no longer
working after a suspend/resume on a Prowise PT301 tablet.

This tablet has a broken _PS0 method on the touchscreen's I2C controller,
causing acpi_device_fix_up_power() to fail, causing fallback to standard
platform-dev handling and specifically causing acpi_lpss_save/restore_ctx
to not run.

The I2C controllers _PS0 method does actually turn on the device, but then
does some more nonsense which fails when run during early boot trying to
use I2C opregion handling on another not-yet registered I2C controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: ks8695: fix section mismatch warning

[ Upstream commit 4aa64677330beeeed721b4b122884dabad845d66 ]

WARNING: vmlinux.o(.text+0x13250): Section mismatch in reference from the function acs5k_i2c_init() to the (unknown reference) .init.data:(unknown)
The function acs5k_i2c_init() references
the (unknown reference) __initdata (unknown).
This is often because acs5k_i2c_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / AVS: SmartReflex: NULL check before some freeing functions is not needed

[ Upstream commit 14d338a857f05f894ba3badd9e6d3039c68b8180 ]

NULL check before some freeing functions is not needed.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: smp: Handle errors reported by the firmware

[ Upstream commit f357b3a7e17af7736d67d8267edc1ed3d1dd9391 ]

The __cpu_up() routine ignores the errors reported by the firmware
for a CPU bringup operation and looks for the error status set by the
booting CPU. If the CPU never entered the kernel, we could end up
in assuming stale error status, which otherwise would have been
set/cleared appropriately by the booting CPU.

Reported-by: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mm: Prevent mismatched 52-bit VA support

[ Upstream commit a96a33b1ca57dbea4285893dedf290aeb8eb090b ]

For cases where there is a mismatch in ARMv8.2-LVA support between CPUs
we have to be careful in allowing secondary CPUs to boot if 52-bit
virtual addresses have already been enabled on the boot CPU.

This patch adds code to the secondary startup path. If the boot CPU has
enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the
secondary can also enable 52-bit support. If not, the secondary is
prevented from booting and an error message is displayed indicating why.

Technically this patch could be implemented using the cpufeature code
when considering 52-bit userspace support. However, we employ low level
checks here as the cpufeature code won't be able to run if we have
mismatched 52-bit kernel va support.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Fix HP SDC hpa address output

[ Upstream commit c4bff35ca1bfba886da6223c9fed76a2b1382b8e ]

Show the hpa address of the HP SDC instead of a hashed value, e.g.:
HP SDC: HP SDC at 0xf0201000, IRQ 23 (NMI IRQ 24)

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Fix serio address output

[ Upstream commit 785145171d17af2554128becd6a7c8f89e101141 ]

We want the hpa addresses printed in the serio modules, not some
virtual ioremap()ed address, e.g.:

 serio: gsc-ps2-keyboard port at 0xf0108000 irq 22 @ 2:0:11
 serio: gsc-ps2-mouse port at 0xf0108100 irq 22 @ 2:0:12

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication

[ Upstream commit 998a84c27a7f3f9133d32af64e19c05cec161a1a ]

imx53-voipac-dmm-668 has two memory nodes, but the correct representation
would be to use a single one with two reg entries - one for each RAM chip
select, so fix it accordingly.

Reported-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed

[ Upstream commit 7c41ea57beb2aee96fa63091a457b1a2826f3c42 ]

If debugging on i.MX is enabled DEBUG_IMX_UART_PORT defines which UART
is used for the debug output. If however debugging is off don't only
hide the then unused config item but drop it completely by using a
dependency instead of a conditional prompt.

This fixes DEBUG_IMX_UART_PORT being present in the kernel config even
if DEBUG_LL is disabled.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix dif and first burst use in write commands

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: bcm-iproc: Prevent unloading the driver module while in use

[ Upstream commit 24906a41eecb73d51974ade0847c21e429beec60 ]

The owner member of struct pwm_ops must be set to THIS_MODULE to
increase the reference count of the module such that the module cannot
be removed while its code is in use.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: drbd: remove a stray unlock in __drbd_send_protocol()

[ Upstream commit 8e9c523016cf9983b295e4bc659183d1fa6ef8e0 ]

There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.

Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix station inactive_time shortly after boot

[ Upstream commit 285531f9e6774e3be71da6673d475ff1a088d675 ]

In the first 5 minutes after boot (time of INITIAL_JIFFIES),
ieee80211_sta_last_active() returns zero if last_ack is zero. This
leads to "inactive time" showing jiffies_to_msecs(jiffies).

 # iw wlan0 station get fc:ec:da:64:a6:dd
 Station fc:ec:da:64:a6:dd (on wlan0)
inactive time: 4294894049 ms
.
.
connected time: 70 seconds

Fix by returning last_rx if last_ack == 0.

Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: fix debugging modules compiled with hot/cold partitioning

[ Upstream commit 8731acc5068eb3f422a45c760d32198175c756f8 ]

gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively.  At least when building modules on s390, this option is
used by default.

gdb assumes that all code is located in .text section, and that .text
section is located at module load address.  With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.

Fix by explicitly telling gdb the addresses of code sections.

It might be tempting to do this for all sections, not only the ones in
the white list.  Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols.  So
keep using the white list approach for the time being.

Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: meson: Fix the wrong value of left time

[ Upstream commit 2c77734642d52448aca673e889b39f981110828b ]

The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.

[0]: http://linux-meson.com

Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on open

[ Upstream commit 23c5a9488f076bab336177cd1d1a366bd8ddf087 ]

When the CAN interface is closed it the hardwre is put in power down
mode, but does not reset the error counters / state. Reset the D_CAN on
open, so the reported state and the actual state match.

According to [1], the C_CAN module doesn't have the software reset.

[1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdf

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>