staging: comedi: dmm32at: rename DMM32AT_AI[LM]SB

For aesthetics, rename these defines used for the A/D LSB/MSB registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: rename DMM32AT_CONV

For aesthetics, rename this define used for the Start A/D Conversion register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: use 8255 module for Digital I/O subdevice

The Dimond-MM-32-AT board uses an internal 82C55-type digital I/O circuit to
provide the 24 digital I/O lines. The only quirk is the need to set the page
selection bits in the control register to select page 1 addresses.

Instead of duplicating the 8255 code, provide an (*io) callback and use the
8255 module to support this subdevice.

This also removes the need for the private data in this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: introduce dmm32at_ai_set_chanspec()

Introduce a helper function to set the analog input channel scan and range
control registers. Use the new helper in the analog input (*insn_read) and
(*do_cmd) functions.

The extra sanity checks in the (*do_cmd) are not necessary. The cmd->chanlist
will always be valid and the (*do_cmdtest) validates the channel list in
Step 5.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: remove unused members of the private data

The 'data' and 'ai_inuse' members in the private data are not used in the
driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: remove dmm32at_ns_to_timer()

This function is not necessary. It simply returns the 'ns' value that was
passed to it.

Remove it as well as the unnecessary Step 4 check of the cmd->convert_arg.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: tidy up cmd->convert_{src, arg} validation

This driver only supports a single convert_src, TRIG_TIMER. Tidy up
the (*do_cmdtest) validation of the cmd->convert_{src,arg}.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: tidy up cmd->scan_begin_{src, arg} validation

This driver only supports a single scan_begin_src, TRIG_TIMER. Tidy up
the (*do_cmdtest) validation of the cmd->scan_begin_{src,arg}.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: tidy up subdevice initialization

For aesthetics, add some whitespace to the subdevice initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: introduce dmm32at_reset()

For aesthetics, factor the board reset and detection code out of the
(*attach) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: tidy up dmm32at_ai_rinsn()

For aesthetics, rename this function to dmm32at_ai_insn_read().

Get the 'chan' and 'range' from the chanspec when declaring the local
variables. Remove the unecessary masking of the 'chan'.

Remove some unnecessary comments.

Change the final return to 'insn->n' to clarify the return value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: introduce dmm32_ai_get_sample()

Introduce a helper function to read the two's complement analog input
sample from the hardware and munge it to the offset binary (unsigned)
format that comedi expects. Use the comedi_offset_munge() helper to
munge the data.

Use the new helper in the analog input (*insn_read) and in the interrupt
handler for the async command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_scans_left' and use the comedi_async
'scans_done' to detect the end-of-acquisition.

This also removes the artifical max limit on the cmd->stop_arg.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: make AI (*cancel) actually cancel async command

Currently the AI (*cancel) changes a private data member to cause the
interrupt handler to cancel the async command after the next interrupt.

Move the code that disables the interrupt and terminates the acquisition
from the interrunt handler into dmm32at_ai_cancel() so that the async
command is terminated instantly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use comedi_async 'scans_done' to detect EOA

The comedi core now counts the number of samples added to the async buffer and
detects the end-of-scan and increments the comedi_async 'scans_done' counter.

Remove the private data member 'stop_counter' and use the 'scans_done' member
to detect the end-of-acquisition.

This fixes a possible interger overflow when calculating the value of the
'stop_counter' and removes the need to accumulate the 'total' number of
samples added to the async buffer in pci9111_handle_fifo_half_full().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use comedi_bytes_to_samples()

Remove the assumption of the sample size by using the comedi_bytes_to_samples()
helper function to convert the number of bytes to the number of samples.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: absorb move_block_from_dma()

Absorb this simple helper function into interrupt_pci9118_ai_dma().

Remove the unnecessary local variables 'sampls' and 'm'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use comedi_async 'scans_done' to detect EOA

The comedi core now counts the number of samples added to the async buffer and
detects the end-of-scan and increments the comedi_async 'scans_done' counter.

Remove the private data member 'ai_act_scan' and use the 'scans_done' member
to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_watchdog: use addi_tcw.h defines for watchdog

Use the generic TCW (timer/counter/watchdog) defines for the 8-bit watchdog.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: enable support for PLD Rev 1.0 I/O mapping

Remove the error return in the (*auto_attach) and allow the driver to
attach to APC-1564 boards that use the PLD Rev 1.0 I/O mapping.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: use addi_tcw.h defines for counters

Use the generic TCW (timer/counter/watchdog) defines for the 32-bit counters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: use addi_tcw.h defines for timer

Use the generic TCW (timer/counter/watchdog) defines for the 12-bit timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_tcw.h: provide generic defines for the ADDI-DATA TCW

The TCW (timer/counter/watchdog) devices in the various ADDI-DATA drivers
use a common register map definition. Provide a common generic define for
these registers so they don't have to be replicated in each driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: split timer and counter subdevices

The timer subdevice is currently broken in this driver.

The Rev 1.0 and 2.x versions of the board both have a 12-bit timer. But only
the Rev 2.x boards have the 3 32-bit counters.

Split the current timer subdevice into two separate subdevices:
  1) A single channel 12-bit timer subdevice
  2) A three channel 32-bit counter subdevice

This represents the hardware correctly and the counters can be disabled on
the Rev 1.0 boards.

Split up the current (*insn_config), (*insn_write), and (*insn_read) so they
only deal with the hardware associated with the subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: move counter register defines to driver

Move the defines for the counter registers from the included source
file to the main driver source file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: fix counter code in main driver source

The Rev 1.0 APCI-1564 boards do not have counters.

Fix the code in the main driver source so that the I/O accesses to the
counters do not happen if the devpriv->counters member is not initialized.

This does not fix the code in hwdrv_apci1564.c. That code violates the
comedi API and is currently broken.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: fix timer iobase for all PLD revisions

The APCI-1564 has different I/O mapping depending on if the PLD revision
is Rev 1.0 or Rev 2.x.

Add a member, 'timer', to the private data for the base address of the
12-bit timer. Fix the register defines so they will work for all PLD
revisions and initialize the devpriv->timer appropriately.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: fix dev->iobase for all PLD revisions

The APCI-1564 has different I/O mapping depending on if the PLD revision is
Rev 1.0 or Rev 2.x.

Fix the main register defines so they will work for all PLD revisions and
initialie the dev->iobase appropriately. Move the register defines to the
main driver source file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: detect PLD revision for I/O mapping

The APCI-1564 has different I/O mapping depending on if the PLD revision is
Rev 1.0 or Rev 2.x. The revision can be determined by reading the EEPROM
register at offset 0x00 of PCI BAR 0 and checking the value of bits 7 to 4.

Add this check to apci1564_auto_attach(). Currently this driver is coded
to work with the Rev 2.x I/O mapping. For now, fail the attach if a Rev 1.0
PLD is detected. Document the I/O mapping for both revisions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: use dev->iobase for main registers

According to ADDI-DATA, the PLD Revision 2.x versions of the APCI-1564 use
PCI BAR 0 for the main registers of the board.

Remove the 'amcc_iobase' member of the private data and use the dev->iobase
to store the base address of PCI BAR 1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: store PCI BAR 1 base address in private data

According to ADDI-DATA, only the PLD Revision 2.x versions of the APCI-1564
have the 3 counters. The base address for these counters is found in PCI BAR 1.

For aesthetics, save this base address in the private data. The dev->iobase
can then be used for the main registers of the board.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: use correct I/O base for APCI1564_DI_INT_STATUS_REG

The APCI1564_DI_INT_STATUS_REG is located in the PCI BAR 0 I/O space. That
base address is stored in devpriv->amcc_iobase. Use that to correctly read
the register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: board does not use an AMCC PCI controller

According to ADDI-DATA, the APCI-1564 board has a FPGA with a PCI core, it
does not use an AMCC PCI controller chip.

Remove the amcc_s5933.h include as well as the read of the AMCC_OP_REG_INTCSR
register. That offset would actually read APCI1564_WDOG_STATUS_REG register
in the FPGA which has nothing to do with the interrupt status.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Fix a typo in rtw_led.*

A rather obvious typo in one of the identifier has been found.  This patch
fixes the typo and ensures any lines changed do not exceed 80 characters
as indicated by scripts/checkpatch.pl

Signed-off-by: Krzysztof Konopko <kris@konagma.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Fix FSF_MAILING_ADDRESS in rtw_led.*

rtw_led.* files include Free Software Foundation's mailing address in
the sample GPL notice.  This is not desired and picked when running
scripts/checkpatch.pl.

Signed-off-by: Krzysztof Konopko <kris@konagma.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Simplify rtw_endofpktfile() in xmit_linux.c

scripts/checkpatch.pl reports a coding style problem in xmit_linux.c

  WARNING:BRACES: braces {} are not necessary for single statement blocks
  #61852: FILE: rtl8188eu/os_dep/xmit_linux.c:70:

This patch removes unnecessary braces and simplifies the function to a
single return statement.

Signed-off-by: Krzysztof Konopko <kris@konagma.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: add missing tasklet_kill on remove path

The powersave tasklet is created in rtllib_softmac_init and
it is not removed while unloading the module.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: prism2fw: fixed code style issue

Fixed checkpatch.pl warning message: line over 80 characters

Signed-off-by: Aede Symen Hoekstra <aedesymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers:staging:dgap: Added a blank line after declaration

This patch fixes the checkpatch.pl warning:

WARNING:Missing a blank line after declaration

Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: Deletion of a check before backlight_device_unregister()

The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Deletion of unnecessary checks before the function call "oz_free_urb_link"

The oz_free_urb_link() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: remove multiple blank lines

This patch fixes the multiple blank lines issue complained by checkpatch.pl
by removing useless blank lines.

Signed-off-by: Le Tan <tamlokveer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: Use better names for two defined values

Give DEFAULT_KEYPAD and DEFAULT_LCD defines better names,
so that their meaning is emphasized.

Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: Reorder module parameter declarations

Change the order of the module parameter declarations
so that it matches the Kconfig order.

Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: Reorder DEFAULT_* values redefines

Change the order of the DEFAULT_* values redefines so that it
matches the Kconfig order.

Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: Reorder initial DEFAULT_* defines

Change the order of the initial DEFAULT_* defines so that it
matches the Kconfig order.

Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: eliminate cvmx_dprintf() usage

Eliminate cvmx_dprintf() usage and use dev_err() instead.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: move helper functions

Move helper functions to make them visible to all functions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: drop multiple NAPI instances

Octeon Ethernet driver is currently trying to wake up multiple
CPU cores for parallel NAPI processing when needed, to cope
with the fact that all network interfaces are handled through
the same receive queue processed by a single core/interrupt
(see http://marc.info/?l=linux-kernel&m=137209784914565&w=2).

This partially overlaps with generic RPS functionality.
Commit a6a39a7fcff5 ("staging: octeon-ethernet: disable load balance
for receiving packet when CONFIG_RPS is enabled") already disabled this
when RPS is enabled. Let's delete this code altogether as it has issues
like packet reordering and potential problems with CPU offlining/onlining.

Tested on EdgeRouter Lite.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-By: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Deletion of unnecessary checks before two function calls

The functions ion_heap_destroy() and vfree() perform also input
parameter validation. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c clean up function comments

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c Removed unneeded comments

Type and function that are not present comments

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c: Remove author comments

Moving names to file header comment

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c camel calse vnt_private rename pDevice to priv

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: IFRFbWriteEmbedded replace __iomem with vnt_private

Fixing callers to vnt_private

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf remove __iomem *dwIoBase from functions

replacing with vnt_private and removing dereferencing from callers

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: card.c move __iomem into functions.

Removing dereferencing from callers

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: card Remove function vUpdateIFS

vUpdateIFS does the same operations of CARDbSetPhyParameter there
is not need to call this function.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: always keep abyCurrentNetAddr aligned to 2

Because the driver now uses ether_addr_copy the alignment of this
variable must be maintained at 2.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: change typedef enum _VIA_PKT_TYPE to macro

Replacing for u8 type and removing cast for byBBType.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef enum _VIA_BB_TYPE with macros

Replacing type with u8

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDbSetPhyParameter remove unused parameters

wCapInfo
byERPField,
*pvSupportRateIEs
*pvExtSupportRateIEs

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dead code remove typedef enum _CARD_PHY_TYPE

Removing unused eCurrentPHYType

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s_vCalculateOFDMRParameter use bb_type for CARD_PHY_TYPE

using u8 for bb_type and replacing PHY_TYPE_11A with BB_TYPE_11A

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDvSetRSPINF us bb_type for CARD_PHY_TYPE

Using u8 for bb_type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDbSetPhyParameter change CARD_PHY_TYPE to bb_type

using u8 for bb_type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dead code remove CARDbAddBasicRate

we nonlonger set rates in the driver

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDvUpdateBasicTopRate use basic_rates to find top rate

basic_rates should now be used to find it.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Remove space before braces for defined() check

checkpatch complains about two places where a space is prohibited
before the braces for in "#if defined()" check. This patch removes
these warnings.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Remove unnecessary braces at ifs

checkpatch complains about three places where braces are not
necessary. This patch removes the braces.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Remove unnecessary line continuations

checkpatch finds two unnecessary line continuations in ldlm_lockd.c
which are removed by this patch.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix warning about unneeded return statement

checkpatch complains about an unneeded return statement in the
function search_granted_lock(), which is removed by this patch.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix initialization of static variables

checkpatch complains about static variables being initialized to 0
which is unnecessary. This patch removes the initialization.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix indentation errors for switch-case

checkpatch complains about two indentation errors where the case
statements are on a higher indentation level than the corresponding
switch statement. This patch removes these errors.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix warning about missing spaces

checkpatch.pl complains about a number of places where spaces were
missing. This patch fixes all of these errors.

For better readability, the warning of hitting the 80 character per
line limit in line 1349 introduced by this change is ignored
deliberately.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix overlong lines

checkpatch complains about a number of lines which are over the
80 character line limit. This patch changes most of them to comply,
the few remaining lines with warnings are not changed for readability
reasons.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Add missing newlines after declarations

checkpatch.pl complains about a number of missing newlines after
declarations. This patch gets rid of these warnings.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8723au: fix sparse warning: incorrect type in assignment

Signed-off-by: Kinka Huang <kinkabrain@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8723au: Fix sparse warning cast to restricted __le16

This patch fixes the following sparse warning:

drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c:343:36: warning:
cast to restricted __le16

by using the le16_to_cpus function.

Signed-off-by: Tobenna P. Igwe <ptigwe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix sparse warning

drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c:747:1: warning: symbol
'rtl8723a_EfusePgPacketRead' was not declared. Should it be static?

Function 'rtl8723a_EfusePgPacketRead' seems to be unused in current
staging code.

Before, it was available as 'static s32 Hal_EfusePgPacketRead',
but code that was using it removed, in the same commit as rename and
signature change to 'bool rtl8723a_EfusePgPacketRead' has taken place.

Signed-off-by: Aleh Suprunovich <br@ahlamon.org>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8723au: core: Fix checkpatch warning

This is a patch to the rtw_cmd.c file that fixes following
Warning by introducing temporary structure.

WARNING: line over 80 characters

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8723au: core: Added missing space reported by checkpatch.

This is a patch to the rtw_cmd.c file that fixes following
Error.

ERROR: spaces required around that '>' (ctx:WxV)

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove sw led handling

The rtl8723au relies on hw led support, so no point carrying a large
unused sw led infrastructure around.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove no-op function Hal_InitChannelPlan23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused rtl8723a_update_txdesc() and child functions

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: pxmitframe->frame_tag is never set to a value > 8

No point of masking out high bits since we never set the value to
anything exceeding bits 0-3.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_dump_xframe(): Use proper ETH_P_* types

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: portctrl(): Remove a pile of unnecessary clutter

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_put_snap23a(): Make it static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_put_snap23a(): Use put_unaligned to set protocol

Reported-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging rtl8723au: rtw_put_smap23a(): Use common SNAP header defines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused rtw_calculate_wlan_pkt_size_by_attribue23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix sparse warnings for lnet/lnet/router.c

Fix the following sparse errors:
drivers/staging/lustre/lnet/lnet/router.c:756:1: warning: symbol 'lnet_wait_known_routerstate' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:788:1: warning: symbol 'lnet_update_ni_status_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:828:1: warning: symbol 'lnet_destroy_rc_data' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:848:16: warning: symbol 'lnet_create_rc_data_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1228:1: warning: symbol 'lnet_destroy_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1238:15: warning: symbol 'lnet_new_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1274:1: warning: symbol 'lnet_rtrpool_free_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1303:1: warning: symbol 'lnet_rtrpool_alloc_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1337:1: warning: symbol 'lnet_rtrpool_init' was not declared. Should it be static?

Signed-off-by: Giedrius Statkevicius <giedriuswork@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Coalesce string fragments

Join the string fragments to make it easier to grep.

Ignored all the 80+ column lines.
Added many missing spaces when coalescing formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mdc: use __FMODE_EXEC macro

FMODE_EXEC is type fmode_t but is used in operations
with integers which leads to sparse warnings:
drivers/staging/lustre/lustre/mdc/mdc_lib.c:198:21: warning: restricted fmode_t degrades to integer
drivers/staging/lustre/lustre/mdc/mdc_locks.c:300:49: warning: restricted fmode_t degrades to integer

Fix by using __FMODE_EXEC macro defined in fs.h.

Note the same warnings occurs with other fmode flags
here but they don't have a corresponding int macro.

Changes since v1:
remove ifdefs. FMODE_EXEC and __FMODE_EXEC should
always be defined in fs.h

Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: lnet: api-nc.c: Fix Style Warnings

Remove an unecessary return statement in a void function.
Remove an unecessary space between a function name and the parentheses.

Signed-off-by: Thomas Wood <tommyandrena@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: ptlrpc: Remove unnecessary braces

Fixes the following checkpatch warning:
WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Balavasu Kuppusammyprathaban <kp.balavasu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs_debug.h: remove final uses of the GOTO macro

Remove the GOTO macro, as it is no longer used.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: remove final uses of the GOTO macro

Remove the goto logging function, as it is no longer used.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: remove final uses of the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

In one case (OES_INV), consecutive gotos were factorized and a break was
removed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>