staging: nvec: specify a platform-device base id

commit 6e3f62f079 (mfd: core: Fix platform-device id generation) modified
the computation of the mfd cell id. Negative numbers forbit the specification
of cell ids as we do. Fix this for now by specifying a base of 0 instead. In
the long run, this may be changed to automatic cell ids (base -2).

Reported-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Merge tag 'iio-for-3.20a_take2' of git://git./linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2

Updated pull request with Daniel's fix on top for the power management
Kconfig changes that had snuck in since last update of the IIO tree
worked it's way through from mainline.

Original pull message

New device support
* jsa1212 proxmity / ambient light sensor
* SM08500 supported added to the kxcjk-1013 accelerometer driver
* KMX61 Accelerometer/Magnetometer.  This took a somewhat rocky path
  being first merged, then reverted for a rewrite after a discussion of
  how to support additional functionality and finally being merged prior
  to some last reviews coming in, with resultant follow up patches.
* Freescale mma9551l driver (minor follow up warning supression patch).
* Semtech SX9500 proximity device driver.
* ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
  for the ak09911.

New functionality
 * Dummy driver gains some virtual registers making it more flexible.
 * IIO_ACTIVITY channel types, with modifiers running, walking etc.  This is
   to support on chip motion clasifiers.  As such it is in the form of a
   confidence percentage.  The only devices so far only do binary decisions
   but this gives us room when other devices give more nuanced clasification.
 * IIO_EV_DIR_NONE type for events where there is no obvious direction.
   First case is step detection.
 * IIO_STEPS channel type for pedometers.
 * ENABLE mask element used to control turning on counting types such as
   the pedometer that need a 'start point'.
 * INSTANCE event type to support things that happen once.
 * info element for height calibration (used in various motion estimation
   algorithms). Note heigh tof use
 * dummy driver demonstration of the use of all the new bits above.
 * event monitor support for the new events.
 * inv_mpu6050 gains an i2c mux to allow bypassing the device to access
   additional devices connected on the other side of it.  Note that in
   Windows these are handled by firmware on the device and not exposed
   directly.
 * inv_mpu6050 gains ACPI enumeration.
 * inkern interface gains iio_write_channel_raw to allow in kernel users
   of DAC functionality via a simple wrapper.
 * Document input current readings in the ABI docs.
 * Add an error message when we get an out of range error in device tree
   processing for the in kernel interfaces.  Basically a device tree debugging
   aid.
 * Add a sanity check that a scan index for a channel is unique during
   registration.  There to help catch bugs as this should never happen
   in a bug free driver.

Cleanups and fixlets

 A rework of buffer registration from Lars - a precursor to some other
 upcoming new stuff (a few patches from others rolled in here as well).
 * Ensure all drivers register the same channels for the device and buffer.
 * Move buffer registration into the core rather than using the old
   two step approach.  Now we have simple ways of using a unified set channels
   for both without requiring channels be exposed by both interface, this
   removes a fair bit of boilerplate.
 * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
   default. It has long be convention in IIO to startup with no channels
   enabled and leave it up to userspace to say what goes in the buffer.
   Getting rid of these allows us to drop export of iio_scan_mask_set.
 * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
   for a while.
 * Allocate standard buffer attributes in the core rather than in every
   driver with a buffer.
 * Make the length attribute read only when a driver is not able to set
   the length.
 * Drop the get_length callback for buffers as it is already available in
   struct iio_buffer.
 * Drop an unused arguement form iio_kfifo_allocate and add devm allocator
   for it.
 * some kconfig entries gain anotation with the resulting module name.
 * Fix a resulting compile issue in dummy driver due to a stub taking
   wrong parameters as a result of the above rework.
 * Fix an off by 2 error in copying the core assigned buffer attributes.

Other cleanups,
 * Trivial space before comma fixups.
 * ak8975 fixlets - none critical.  Rework to allow more device support.
 * Drop unnecessary sizeof(u8) calls.
 * bmp280 - refactor the compensation code to reduce copy operations and
   code length.  A second patch futher optimized this and performed some
   other minor cleanups.
 * kxcjk-1013 - various power control cleanups to avoid unnecessary enable
   / disable of device.  Make sure it is only controlled at all if CONFIG_PM
   is enabled.  Also som cleanups of error paths.
 * Small cleanups in adf4530 driver - pointless message and unnecessary braces.
 * Clarifiy the proximity ABI docs to make it clear it should get bigger
   as we move futher away.
 * Drop a misleading comment form industrialio-core.c
 * Trivial white space cleanups.
 * sca3000 looses an unused debug function.
 * Fix char unsigned ordering in ad8366
 * Increase the sleep time in ad9523 to make it predictable (value didn't
   really matter so make it more than 20 msecs)
 * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
   the meet all the 'interesting' documentation.
 * A couple of cleanups for the staging ad5933 driver to avoid unnecessary
   conversion to a processed temperature vlaue in kernel and remove
   platform data form the state structure as not needed after probe.
 * Fix a wrong scale factor in the docs.

Misc
 * Add IIO include files to the maintainers entry.

staging: fbtft: remove ARCH_BCM2708 optimization

ARCH_BCM2708 is not present in mainline so remove optimization.

Signed-off-by: Noralf Trønnes <notro@tronnes.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio kmx61 / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/iio/imu/kmx61.c

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Merge 3.19-rc5 into staging-next

We want the staging fixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.19-rc5

Merge tag 'armsoc-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We've been sitting on our fixes branch for a while, so this batch is
  unfortunately on the large side.

  A lot of these are tweaks and fixes to device trees, fixing various
  bugs around clocks, reg ranges, etc.  There's also a few defconfig
  updates (which are on the late side, no more of those).

  All in all the diffstat is bigger than ideal at this time, but nothing
  in here seems particularly risky"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  reset: sunxi: fix spinlock initialization
  ARM: dts: disable CCI on exynos5420 based arndale-octa
  drivers: bus: check cci device tree node status
  ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
  ARM: nomadik: fix up leftover device tree pins
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
  ARM: exynos_defconfig: Enable LM90 driver
  ARM: exynos_defconfig: Enable options for display panel support
  arm: dts: Use pmu_system_controller phandle for dp phy
  ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
  ARM: dts: berlin: correct BG2Q's SM GPIO location.
  ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
  ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
  ARM: dts: Revert disabling of smc91x for n900
  ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
  ARM: dts: dra7-evm: fix qspi device tree partition size
  ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
  ...

Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux

Pull clock driver fixes from Mike Turquette:
 "Small number of fixes for clock drivers and a single null pointer
  dereference fix in the framework core code.

  The driver fixes vary from fixing section mismatch warnings to
  preventing machines from hanging (and preventing developers from
  crying)"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: fix possible null pointer dereference
  Revert "clk: ppc-corenet: Fix Section mismatch warning"
  clk: rockchip: fix deadlock possibility in cpuclk
  clk: berlin: bg2q: remove non-exist "smemc" gate clock
  clk: at91: keep slow clk enabled to prevent system hang
  clk: rockchip: fix rk3288 cpuclk core dividers
  clk: rockchip: fix rk3066 pll lock bit location
  clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
  clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is one fix for a Multiqueue sleeping in invalid context problem
  and a MAINTAINER file update for Qlogic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ->queue_rq can't sleep
  MAINTAINERS: Update maintainer list for qla4xxx

staging: fbtft: add fbtft_device driver

This commit adds the fbtft_device driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add flexfb driver

This commit adds the flexfb driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_watterott driver

This commit adds the fb_watterott driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_upd161704 driver

This commit adds the fb_upd161704 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_uc1701 driver

This commit adds the fb_uc1701 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_tls8204 driver

This commit adds the fb_tls8204 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_tinylcd driver

This commit adds the fb_tinylcd driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_st7735r driver

This commit adds the fb_st7735r driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ssd1351 driver

This commit adds the fb_ssd1351 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ssd1331 driver

This commit adds the fb_ssd1331 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ssd1306 driver

This commit adds the fb_ssd1306 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ssd1289 driver

This commit adds the fb_ssd1289 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_s6d1121 driver

This commit adds the fb_s6d1121 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_s6d02a1 driver

This commit adds the fb_s6d02a1 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ra8875 driver

This commit adds the fb_ra8875 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_pcd8544 driver

This commit adds the fb_pcd8544 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9486 driver

This commit adds the fb_ili9486 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9481 driver

This commit adds the fb_ili9481 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9341 driver

This commit adds the fb_ili9341 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9340 driver

This commit adds the fb_ili9340 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9325 driver

This commit adds the fb_ili9325 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_ili9320 driver

This commit adds the fb_ili9320 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_hx8353d driver

This commit adds the fb_hx8353d driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_hx8347d driver

This commit adds the fb_hx8347d driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_hx8340bn driver

This commit adds the fb_hx8340bn driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_bd663474 driver

This commit adds the fb_bd663474 driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add fb_agm1264k-fl driver

This commit adds the fb_agm1264k-fl driver from the fbtft project at
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: core support

This commit adds the core fbtft framework from
https://github.com/notro/fbtft.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt29f_spinand: Fix typo in Kconfig

This patch fix a spelling typo in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: davinci_vpfe: fix space prohibited before semicolon warning

This patch fixes the following checkpatch.pl warning:

space prohibited before semicolon

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: remove space after casts

This patch fixes the following checkpatch.pl warnings:
ashmem.c:753: CHECK:SPACING: No space is necessary after a cast
ashmem.c:756: CHECK:SPACING: No space is necessary after a cast
ashmem.c:777: CHECK:SPACING: No space is necessary after a cast

Signed-off-by: Fabian Holler <fabian.holler@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: remove blank lines after open braces

This patch fixes the following checkpatch.pl warnings:
ashmem.c:552: CHECK:BRACES: Blank lines aren't necessary after an open brace '{'
ashmem.c:801: CHECK:BRACES: Blank lines aren't necessary after an open brace

Signed-off-by: Fabian Holler <fabian.holler@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: fix indentation to match open parenthesis

This patches fixes the following checkpatch.pl warning:
ashmem.c:450: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis

Signed-off-by: Fabian Holler <fabian.holler@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Correct coding style in logger.c

Correct intent and missing space

Signed-off-by: Guillaume Vercoutere <gvercoutere@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: fix line length coding style issue in sync_debug.c

This is a patch to sync_debug.c that fixes an over 80 character warning found by the checkpatch.pl tool
Signed-off-by: Steve Pennington <sgpenn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:board: remove unnecessary function

Remove the unnecessary 'of_can_translate_address',
which is already removed in commit
d9c6866be8a145e32da616d8dcbae806032d75b5 ("of: kill off
of_can_translate_address").

Signed-off-by: Tsung-Han Lin <tsunghan.tw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: virtpci: Remove no-op suspend/resume functions

The virtpci bus driver still uses the legacy suspend/resume callbacks. In
their current implementation these callbacks only contain a macro that
always expands to 'do { } while(0)'. So instead of converting them to dev PM
ops just remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: always initialize the free list parameters

Currently we initialize the heap free_lock and free list size in
ion_heap_init_deferred_free, which is only called when the
ION_HEAP_FLAG_DEFER_FREE heap flag is given.  However, the lock and size
are used in the shrinker path as well as the deferred free path, and we
can register a shrinker *without* enabling deferred freeing.  So, if a
heap provides a shrinker but *doesn't* set the DEFER_FREE flag we will
use these parameters uninitialized (resulting in a spinlock bug and
broken shrinker accounting).

Fix these problems by initializing the free list parameters directly in
ion_device_add_heap, which is always called no matter which heap
features are being used.

Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: remove unnecessary check

the check for htotal and vtotal is not required as we have already
checked for them and returned -EINVAL if any of them is zero.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: ion_cma_heap: remove ion_cma_get_sgtable

Remove the temporary code ion_cma_get_sgtable,
use dma_common_get_sgtable instead

Signed-off-by: Zeng Tao <prime.zeng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt29f_spinand: check for the return value of spinand_read_status

The spinan_read_status can fail, check for the return value and
fail if the spinand_read_status fails.

Cc: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Combine the consecutive string

Combine the consecutive string

Signed-off-by: Panir Nyan <Panir.Nyan@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Split the comment to fit the length

Split the comment to fit the length.

Signed-off-by: Panir Nyan <Panir.Nyan@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fix comment in prism2sta.c

This patch fix a spelling typo and modify a comment.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fix typo in comments and printk

This patch fix spelling typo in comments and print.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: hfa384x_usb: fixed an 'else' statement coding style issue

Removed useless 'else' statement that followed an 'if' statement that
had a return 1 and moved all the content from the 'else' to outside of
the switch case, this way if any case is sufficient it returns '1',
otherwise it will return 0.

Signed-off-by: Eduardo Barretto <edusbarretto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: use gotos for handling error in dgap_remap()

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208/ms.c: Code style fix (space before comma)

This commit fixes the following errors reported by checkpatch.pl -f:
./rts5208/ms.c:1294: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1345: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1622: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1991: ERROR: space prohibited before that ',' (ctx:WxW)

This patch also adds missing spaces before and after '+' sign in two places.

This file has some other style issues and they will be fixed with latter
patches.

Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: clocking-wizard: Handle invalid clk in notifier

Even though it should never happen, handle the case that the clock
notifier is called with an unexpected clock handle. This avoids the
compiler warning:
   drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c: In function 'clk_wzrd_clk_notifier':
>> drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c:99:6: warning: 'max' may be used uninitialized in this function [-Wmaybe-uninitialized]
      if (ndata->new_rate > max)
         ^

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clocking-wizard: Fixed missing blank line warning

Added a new line after declaration to remove the warning
'Missing a blank line after declarations'

Signed-off-by: Athira Lekshmi <andnlnbn18@gmail.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cptm1217: check if interrupts are masked at probe

the function cp_tm1217_mask_interrupt can return failure.
added the check and the failure path.

Cc: Ramesh Agarwal <ramesh.agarwal@intel.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Add blank lines after declarations

Fixes this checkpatch warning:
WARNING: Missing a blank line after declarations

Signed-off-by: Arno Tiemersma <arno.tiemersma@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: trailing statements should be on next line

This patch fixes the checkpatch.pl issue
Error: trailing statements should be on next line

Signed-off-by: Balavasu <kp.balavasu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove unused function

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: HPDD-discuss@lists.01.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Removed spaces before increments and decrements

Fixed a coding style issue

Signed-off-by: Igor Ishchenko <igor.ishchenko@coderivium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fid: Remove space before braces for defined() check

checkpatch complains about three places where a space is prohibited
before the braces for an "#if defined()" check. This patch removes
the spaces.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: potential underflow in mdc_iocontrol()

Smatch complains that "data->ioc_plen2" is a user controlled value and,
since we cast to signed int, the limit check can underflow.  It's not
very serious because probably the copy_to_user() would return -EFAULT
on every arch that matters instead of creating an info leak.  Also I
haven't followed it through to see if the value is really user
controlled.

But definitely it would be safer to cast to unsigned so let's do that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: fix sparse warnings about static declaration

Fixes the following sparse warnings:

drivers/staging/lustre/lustre/libcfs/linux/linux-prim.c:198:1: warning:
 symbol 'libcfs_arch_init' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/linux/linux-prim.c:204:1: warning:
 symbol 'libcfs_arch_cleanup' was not declared. Should it be static?

Signed-off-by: Serguey Parkhomovsky <sergueyparkhomovsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: do not initialise statics to 0 or NULL

This patch fixes the checkpatch.pl issue
Error: do not initialise statics to 0 or NULL

Signed-off-by: Balavasu <kp.balavasu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: fix _recycle_buffer context imbalance

Fix the sparse warning about a context imbalance in the
srpc_service_recycle_buffer function by telling sparse that it
should expect the lock to be held on entry and held on exit.

  drivers/staging/lustre/lnet/selftest/rpc.c:725:20: warning: context imbalance in 'srpc_service_recycle_buffer' - unexpected unlock

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: fix _post_buffer context imbalance

Fix the sparse warning about a context imbalance in the
srpc_service_post_buffer function by telling sparse that it
should expect the lock to be held on entry and held on exit.

  drivers/staging/lustre/lnet/selftest/rpc.c:508:17: warning: context imbalance in 'srpc_service_post_buffer' - unexpected unlock

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: fix sfw_deactivate_session context imbalance

Fix the sparse warning about a context imbalance in the
sfw_deactivate_session function by telling sparse that it
should expect the lock to be held on entry and held on exit.

  drivers/staging/lustre/lnet/selftest/framework.c:210:9: warning: context imbalance in 'sfw_deactivate_session' - unexpected unlock

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: fix "not declared" by declaring static

Fix several "symbol '...' was not declared" sparse warnings
for variables which are only used locally by declaring them static.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: fix "not declared" by declaring in header

Fix several "symbol '...' was not declared" sparse warnings which
are caused by global variables by declaring them in the header file.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs/nidstrings: Avoid forward declarations

Avoid forward declaratoins by moving functions to a location before they
are referenced.

Signed-off-by: Sören Brinkmann <soeren.brinkmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs/nidstrings: Declare internal symbols static

This fixes sparse warnings:
  staging/lustre/lustre/libcfs/nidstrings.c:200:11: warning: symbol 'libcfs_nnetstrfns' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:203:1: warning: symbol 'libcfs_lo_str2addr' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:210:1: warning: symbol 'libcfs_ip_addr2str' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:227:1: warning: symbol 'libcfs_ip_str2addr' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:248:1: warning: symbol 'libcfs_decnum_addr2str' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:254:1: warning: symbol 'libcfs_hexnum_addr2str' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:260:1: warning: symbol 'libcfs_num_str2addr' was not declared. Should it be static?
  staging/lustre/lustre/libcfs/nidstrings.c:279:18: warning: symbol 'libcfs_lnd2netstrfns' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:292:18: warning: symbol 'libcfs_namenum2netstrfns' was not declared. Should it be static?
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:307:18: warning: symbol 'libcfs_name2netstrfns' was not declared. Should it be static?

Some functions had static forward declarations followed by non-static
implementations. Those forward declarations are removed and the
implementations are declared static and moved into a location that
doesn't require forward declarations.

Signed-off-by: Sören Brinkmann <soeren.brinkmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove custom MIN/MAX and min_t operations

Remove all custom MIN/MAX and min_t operations since they are
no longer needed.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace MIN with min_t, remove cast

Switch from MIN to min_t and remove the previous cast of the second
argument to int.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace MIN with min, cast (__kernel_size_t)

Switch from MIN to min and fix the new type warning.  The
warning is produced because a comparison between iov_len,
which is a __kernel_size_t, is made to kiov_len, which is an
unsigned int (include/linux/lnet/types.h).  Fix the warning
by casting kiov_len to __kernel_size_t.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace MIN/MAX with min_t/max_t

Switch from MIN/MAX to min_t/max_t with a size_t type.  The size_t type
was chosen because one operand is a size_t and all the others are
immediate integer values.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace MIN with min_t

Switch from MIN to the built in min_t with the int type.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use min/max instead of MIN/MAX, simple cases

Custom MIN/MAX operations are being used which are not as robust
as the built in min/max operations which will warn about potentially
problematic type comparisons.

For the simple cases, where no type warning is produced, simply
replace MIN/MAX with min/max.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: cleanup align switch and case

Align switch and case to be at the same indent.

Signed-off-by: Samuel Kihahu <skihahu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: error handling tweaks in obd_ioctl_getdata()

1)  The places which called copy_from_user() were returning the number
of bytes not copied instead of -EFAULT.

2) The user could trigger a memory leak if the condition
"(hdr.ioc_len != data->ioc_len)" was true.  Instead of adding a new call
to OBD_FREE_LARGE(), I created a free_buf label and changed everything
to use that label.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: obdclass: lprocfs_status.c: Tidied up some code in a case statement

Tidied up some code in a case statement after a discussion.

This was partly found using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: obdclass: lprocfs_status.c: Removed an unnecessary NULL check

Removed an unnecessary NULL check.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: ptlrpc: add "ptlrpc_internal.h" to sec_gc.c

ptlrpc_internal.h contains the prototypes for sptlrpc_gc_init() and
sptlrpc_gc_fini(), which are defined in sec_gc.c.

This removes the following sparse warnings:

drivers/staging/lustre/lustre/ptlrpc/sec_gc.c:217:5: warning: symbol 'sptlrpc_gc_init' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/sec_gc.c:241:6: warning: symbol 'sptlrpc_gc_fini' was not declared. Should it be static?

Signed-off-by: Spencer Baugh <sbaugh@andrew.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: mdc: mdc_lib.c: Removed an unnecessary NULL check

Removed an unnecessary NULL check.
I have checked the only place this function is called from.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Track sign separately

The `mult' parameter is negated if the user data begins with a '-' so
that the final value has the appropriate sign.  But `mult' is only used
if the user data does not include a "units" suffix.  In this case,
`mult' is overridden with the numeric scale conveyed by the units suffix,
but retains the sign of the original value.

Having `mult' serving double-duty works but is confusing.  Use a new
local variable to store the sign of the user data instead.  This also
fixes a pitfall of passing 0 to `mult', expecting it to be ignored when
a units suffix is specified, but having the effect of taking the
absolute value of the user-provided data.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Use mult if units not specified

Units can be passed to lprocfs_write_frac_u64_helper() via a suffix
(e.g., "...K", "...M", etc.) tacked onto the value.  A comment states
that "specified units override the multiplier," though the multiplier is
overridden regardless.  Update the conditional logic so that it only
applies when units are specified.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: fix sparse warnings about static declaration

make sparse happy since these two fuchtion are only used in module.c.
tested by successful compilation.

Signed-off-by: Jia He <hejianet@gmail.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Cleanup cfs_str2mask in libcfs_string.c

- Replace body-less for-loop with while loop
- Use '\0' for null character instead of 0

Signed-off-by: Matthew Tyler <matt.tyler@flashics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix minor style error in libcfs_string.c

Signed-off-by: Matthew Tyler <matt.tyler@flashics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: don't use iovec instead of kvec

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obd: Fix a coding style issue

Fixed a brace coding style issue for functions.

Signed-off-by: Dean Michael Ancajas <dbancajas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre:lustre:ptlrpc: fix sparse warnings in lproc_ptlrpc.c

Fixed the below warning in sparse:

drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c:184:6:
warning: symbol 'ptlrpc_lprocfs_register' was not declared.
Should it be static?

Signed-off-by: Fred Chou <fred.chou.nd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace static value with define

This patch replace the value '80' used in several files in the lustre source code
with a define LUSTRE_MDT_MAXNAMELEN.

This value is used in 4 different structures as the maximum len for a service name.
According to the comments, these names follow a convention which make it possible
to use the same define for LCS, LSS, LCF, and LSF.

Signed-off-by: Tristan Lelong <tristan@lelong.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix sparse warning on LPROC_SEQ_FOPS macros

This patch fix a sparse warning in lustre sources

warning: incorrect type in argument 1 (different address spaces)
    expected void [noderef] <asn:1>*to
    got char *<noident>

This is done by adding the missing __user attribute on userland pointers inside the LPROC_SEQ_FOPS like macros:
- LPROC_SEQ_FOPS
- LPROC_SEQ_FOPS_RW_TYPE
- LPROC_SEQ_FOPS_WR_ONLY
- LDLM_POOL_PROC_WRITER

The patch also updates all the functions that are used by this macro:
- lprocfs_wr_*
- *_seq_write

as well as some helpers used by the previously modified functions (otherwise fixing the sparse warning add some new ones):
- lprocfs_write_frac_helper
- lprocfs_write_helper
- lprocfs_write_u64_helper

The patch also fixes one __user pointer direct dereference by strncmp in function fld_proc_hash_seq_write.

Signed-off-by: Tristan Lelong <tristan@lelong.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fld: fixed symbol was not declared

Fixes the sparse warning:
"warning: symbol 'fld_type_proc_dir' was not declared. Should it be static?"

Also removes initialization to NULL.

Signed-off-by: Brian Vandre <bvandre@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000-pcmcia: fix else close brace style

Fix the following checkpatch.pl errors

ERROR: else should follow close brace '}'
+                       }
+                       else {

ERROR: else should follow close brace '}'
+                       }
+                       else {

ERROR: else should follow close brace '}'
+                       }
+                       else {

ERROR: else should follow close brace '}'
+       }
+       else {

ERROR: else should follow close brace '}'
+                       }
+                       else {

Signed-off-by: Austin Kerbow <amkerbow@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: ft1000-usb: ft1000_hw.c: Fix a potential memory leak.

Avoid allocate memory if we will exit the function.

Was found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>