net: stmmac: allow CSR clock of 300MHz

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: fix use after free on rmmod

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ]

plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.

[   31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[   31.275563] Freed by task 306:
[   30.276782]  platform_device_release+0x25/0x80

Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: Fix uaf in blk_trace access after removing by sysfs

[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ]

There is an use-after-free problem triggered by following process:

      P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
  blk_trace_remove_queue
    synchronize_rcu
    blk_trace_free
      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
        relay_close_buf
  relay_destroy_buf
    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a896154119f ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: fix a lock order reversal in md_alloc

[ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ]

Commit b0140891a8cea3 ("md: Fix race when creating a new md device.")
not only moved assigning mddev->gendisk before calling add_disk, which
fixes the races described in the commit log, but also added a
mddev->open_mutex critical section over add_disk and creation of the
md kobj.  Adding a kobject after add_disk is racy vs deleting the gendisk
right after adding it, but md already prevents against that by holding
a mddev->active reference.

On the other hand taking this lock added a lock order reversal with what
is not disk->open_mutex (used to be bdev->bd_mutex when the commit was
added) for partition devices, which need that lock for the internal open
for the partition scan, and a recent commit also takes it for
non-partitioned devices, leading to further lockdep splatter.

Fixes: b0140891a8ce ("md: Fix race when creating a new md device.")
Fixes: d62633873590 ("block: support delayed holder registration")
Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix potential VPE leak on error

[ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ]

In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.

Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.

Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ]

After printing the list of thermal governors, then this function prints
a newline character.  The problem is that "size" has not been updated
after printing the last governor.  This means that it can write one
character (the NUL terminator) beyond the end of the buffer.

Get rid of the "size" variable and just use "PAGE_SIZE - count" directly.

Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Adjust iface sysfs attr detection

[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_en: Don't allow aRFS for encapsulated packets

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

[ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ]

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hso: fix muxed tty registration

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: mvebu-uart: fix driver's tx_empty callback

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mcb: fix error handling in mcb_alloc_bus()

commit 25a1433216489de4abc889910f744e952cb6dbae upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback")
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add device id for Foxconn T99W265

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: remove duplicate USB device ID

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Telit LN920 compositions

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: remove duplicated 0xac24 device ID

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream.

Further testing has revealed that LaCie Rugged USB3-FW does work with
uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled.

Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/
Cc: stable <stable@vger.kernel.org>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: uart: fix tty use after free

commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e15175708 ("greybus: more uart work")
Cc: stable@vger.kernel.org # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c

commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/x86: fix PV trap handling on secondary processors

commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac4f4e ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix incorrect check for null pointer in header_assemble

commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()

commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: fix a loop in set_feature()

commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: drop acl cache for directories too

commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream.

ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock.  It should also drop for
DIRECTORY.  Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.

The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:

  Node 1                    Node 2
  --------------            ----------------
  getfacl dir1

                            getfacl dir1    <-- this is OK

  setfacl -m u:user1:rwX dir1
  getfacl dir1   <-- see the change for user1

                            getfacl dir1    <-- can't see change for user1

Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.248

Link: https://lore.kernel.org/r/20210924124329.173674820@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210925120745.079749171@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ]

The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.

Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().

Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rockchip: Don't modify HW state in .remove() callback

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ]

kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del().  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here
to avoid memory leak, because kobject_init_and_add may return error
without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ]

The kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del.  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to
avoid memory leak, because kobject_init_and_add may return error without
freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix NULL pointer in nilfs_##name##_attr_release

[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ]

In nilfs_##name##_attr_release, kobj->parent should not be referenced
because it is a NULL pointer.  The release() method of kobject is always
called in kobject_put(kobj), in the implementation of kobject_put(), the
kobj->parent will be assigned as NULL before call the release() method.
So just use kobj to get the subgroups, which is more efficient and can fix
a NULL pointer reference problem.

Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_device_group

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL
pointer dereference issue caused by incorrect usage of kboject in nilfs2
sysfs implementation.

This patch (of 6):

Reported by syzkaller:

  BUG: memory leak
  unreferenced object 0xffff888100ca8988 (size 8):
  comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
  hex dump (first 8 bytes):
  6c 6f 6f 70 31 00 ff ff loop1...
  backtrace:
    kstrdup+0x36/0x70 mm/util.c:60
    kstrdup_const+0x35/0x60 mm/util.c:83
    kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
    kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
    kobject_add_varg lib/kobject.c:384 [inline]
    kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
    nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
    init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
    nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
    nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
    legacy_get_tree+0x105/0x210 fs/fs_context.c:592
    vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
    do_new_mount fs/namespace.c:2905 [inline]
    path_mount+0xf9b/0x1990 fs/namespace.c:3235
    do_mount+0xea/0x100 fs/namespace.c:3248
    __do_sys_mount fs/namespace.c:3456 [inline]
    __se_sys_mount fs/namespace.c:3433 [inline]
    __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject
is needed because memory may be allocated in kobject_init_and_add
without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the
memory associated with the kobject.  As the section "Kobject removal" of
"Documentation/core-api/kobject.rst" says, kobject_del() just makes the
kobject "invisible", but it is not cleaned up.  And no more cleanup will
do after cleanup_dev_kobject, so kobject_put is needed here.

Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: lockdep annotations for try_nonblocking_invalidate

[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Set DMA mask for coherent APIs

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.

Call trace:
[  489.531257]  dma_alloc_from_pool+0x8c/0x1c0
[  489.535431]  dma_direct_alloc+0x284/0x330
[  489.539432]  dma_alloc_attrs+0x80/0xf0
[  489.543174]  dma_pool_alloc+0x160/0x2c0
[  489.547003]  xilinx_cdma_prep_memcpy+0xa4/0x180
[  489.551524]  dmatest_func+0x3cc/0x114c
[  489.555266]  kthread+0x124/0x130
[  489.558486]  ret_from_fork+0x10/0x3c
[  489.562051] ---[ end trace 248625b2d596a90a ]---

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ioat: depends on !UML

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ]

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Move pci_dev_is_behind_card_dino to where it is used

[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ]

parisc build test images fail to compile with the following error.

drivers/parisc/dino.c:160:12: error:
'pci_dev_is_behind_card_dino' defined but not used

Move the function just ahead of its only caller to avoid the error.

Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash")
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH

[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ]

Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a
new config HARDLOCKUP_DETECTOR, which selects the non-existing config
HARDLOCKUP_DETECTOR_ARCH.

Hence, ./scripts/checkkconfigsymbols.py warns:

HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug

Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.

Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered

commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream.

This fixes a race condition: After pwmchip_add() is called there might
already be a consumer and then modifying the hardware behind the
consumer's back is bad. So set the default before.

(Side-note: I don't know what this register setting actually does, if
this modifies the polarity there is an inconsistency because the
inversed polarity isn't considered if the PWM is already running during
.probe().)

Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value")
Cc: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

profiling: fix shift-out-of-bounds bugs

commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream.

Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from
userspace we need to clamp this value into [0, BITS_PER_LONG -1]
boundaries.

Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type,
but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent
possible shiht-out-of-bounds sample_step type was changed to
"unsigned long".

Also, "unsigned short int" will be sufficient for storing
[0, BITS_PER_LONG] value, that's why there is no need for
"unsigned long" prof_shift.

Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

prctl: allow to setup brk for et_dyn executables

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.

Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.

For example a test program shows

 | # ~/t
 |
 | start_code      401000
 | end_code        401a15
 | start_stack     7ffce4577dd0
 | start_data    403e10
 | end_data        40408c
 | start_brk    b5b000
 | sbrk(0)         b5b000

and when executed via ld-linux

 | # /lib64/ld-linux-x86-64.so.2 ~/t
 |
 | start_code      7fc25b0a4000
 | end_code        7fc25b0c4524
 | start_stack     7fffcc6b2400
 | start_data    7fc25b0ce4c0
 | end_data        7fc25b0cff98
 | start_brk    55555710c000
 | sbrk(0)         55555710c000

This of course prevent criu from restoring such programs.  Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data.  Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.

Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/trans_virtio: Remove sysfs file on probe failure

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to
allocate chan->vc_wq during probe.

Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com
Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: add param size validation for SCTP_PARAM_SET_PRIMARY

commit ef6c8d6ccf0c1dccdda092ebe8782777cd7803c9 upstream.

When SCTP handles an INIT chunk, it calls for example:
sctp_sf_do_5_1B_init
  sctp_verify_init
    sctp_verify_param
  sctp_process_init
    sctp_process_param
      handling of SCTP_PARAM_SET_PRIMARY

sctp_verify_init() wasn't doing proper size validation and neither the
later handling, allowing it to work over the chunk itself, possibly being
uninitialized memory.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: validate chunk size in __rcv_asconf_lookup

commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream.

In one of the fallbacks that SCTP has for identifying an association for an
incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek.
Thing is, at this stage nothing was validating that the chunk actually had
enough content for that, allowing the peek to happen over uninitialized
memory.

Similar check already exists in actual asconf handling in
sctp_verify_asconf().

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix max key size for sha384 and sha512

commit 192125ed5ce62afba24312d8e7a0314577565b4a upstream.

Below commit came with a typo in the CONFIG_ symbol, leading
to a permanently reduced max key size regarless of the driver
capabilities.

Reported-by: Horia Geantă <horia.geanta@nxp.com>
Fixes: b8fbdc2bc4e7 ("crypto: talitos - reduce max key size for SEC1")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: remove duplicate macro list_entry_is_head()

commit 9801ca279ad37f72f71234fa81722afd95a3f997 upstream.

Strangely I hadn't had noticed the existence of the list_entry_is_head()
in apparmor code when added the same one in the list.h.  Luckily it's
fully identical and didn't break builds.  In any case we don't need a
duplicate anymore, thus remove it from apparmor code.

Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com
Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn " <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: Fix missed wakeup of exp_wq waiters

commit fd6bc19d7676a060a171d1cf3dcbf6fd797eb05f upstream.

Tasks waiting within exp_funnel_lock() for an expedited grace period to
elapse can be starved due to the following sequence of events:

1. Tasks A and B both attempt to start an expedited grace
period at about the same time. This grace period will have
completed when the lower four bits of the rcu_state structure's
->expedited_sequence field are 0b'0100', for example, when the
initial value of this counter is zero. Task A wins, and thus
does the actual work of starting the grace period, including
acquiring the rcu_state structure's .exp_mutex and sets the
counter to 0b'0001'.

2. Because task B lost the race to start the grace period, it
waits on ->expedited_sequence to reach 0b'0100' inside of
exp_funnel_lock(). This task therefore blocks on the rcu_node
structure's ->exp_wq[1] field, keeping in mind that the
end-of-grace-period value of ->expedited_sequence (0b'0100')
is shifted down two bits before indexing the ->exp_wq[] field.

3. Task C attempts to start another expedited grace period,
but blocks on ->exp_mutex, which is still held by Task A.

4. The aforementioned expedited grace period completes, so that
->expedited_sequence now has the value 0b'0100'.  A kworker task
therefore acquires the rcu_state structure's ->exp_wake_mutex
and starts awakening any tasks waiting for this grace period.

5. One of the first tasks awakened happens to be Task A.  Task A
therefore releases the rcu_state structure's ->exp_mutex,
which allows Task C to start the next expedited grace period,
which causes the lower four bits of the rcu_state structure's
->expedited_sequence field to become 0b'0101'.

6. Task C's expedited grace period completes, so that the lower four
bits of the rcu_state structure's ->expedited_sequence field now
become 0b'1000'.

7. The kworker task from step 4 above continues its wakeups.
Unfortunately, the wake_up_all() refetches the rcu_state
structure's .expedited_sequence field:

wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);

This results in the wakeup being applied to the rcu_node
structure's ->exp_wq[2] field, which is unfortunate given that
Task B is instead waiting on ->exp_wq[1].

On a busy system, no harm is done (or at least no permanent harm is done).
Some later expedited grace period will redo the wakeup.  But on a quiet
system, such as many embedded systems, it might be a good long time before
there was another expedited grace period.  On such embedded systems,
this situation could therefore result in a system hang.

This issue manifested as DPM device timeout during suspend (which
usually qualifies as a quiet time) due to a SCSI device being stuck in
_synchronize_rcu_expedited(), with the following stack trace:

schedule()
synchronize_rcu_expedited()
synchronize_rcu()
scsi_device_quiesce()
scsi_bus_suspend()
dpm_run_callback()
__device_suspend()

This commit therefore prevents such delays, timeouts, and hangs by
making rcu_exp_wait_wake() use its "s" argument consistently instead of
refetching from rcu_state.expedited_sequence.

Fixes: 3b5f668e715b ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: David Chen <david.chen@nutanix.com>
Acked-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/bpf: Fix optimizing out zero-extensions

commit db7bee653859ef7179be933e7d1384644f795f26 upstream.

Currently the JIT completely removes things like `reg32 += 0`,
however, the BPF_ALU semantics requires the target register to be
zero-extended in such cases.

Fix by optimizing out only the arithmetic operation, but not the
subsequent zero-extension.

Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.247

Link: https://lore.kernel.org/r/20210920163924.591371269@linuxfoundation.org
Link: https://lore.kernel.org/r/20210921124904.823196756@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant

commit 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 upstream.

The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot
be represented as a 32-bit signed binary integer. Fix by using algfi in
this particular case.

Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: renesas: sh_eth: Fix freeing wrong tx descriptor

[ Upstream commit 0341d5e3d1ee2a36dd5a49b5bef2ce4ad1cfa6b4 ]

The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.

Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom

[ Upstream commit 9ddbc2a00d7f63fa9748f4278643193dac985f2d ]

Previous commit 68233c583ab4 removes the qlcnic_rom_lock()
in qlcnic_pinit_from_rom(), but remains its corresponding
unlock function, which is odd. I'm not very sure whether the
lock is missing, or the unlock is redundant. This bug is
suggested by a static analysis tool, please advise.

Fixes: 68233c583ab4 ("qlcnic: updated reset sequence")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: socket: icmp6: fix use-after-scope

[ Upstream commit 730affed24bffcd1eebd5903171960f5ff9f1f22 ]

Bug reported by KASAN:

BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
Call Trace:
(...)
inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
(...)
nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91
net/ipv6/netfilter/nf_socket_ipv6.c:146)

It seems that this bug has already been fixed by Eric Dumazet in the
past in:
commit 78296c97ca1f ("netfilter: xt_socket: fix a stack corruption bug")

But a variant of the same issue has been introduced in
commit d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")

`daddr` and `saddr` potentially hold a reference to ipv6_var that is no
longer in scope when the call to `nf_socket_get_sock_v6` is made.

Fixes: d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: b53: Fix calculating number of switch ports

[ Upstream commit cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 ]

It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).

A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.

This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: export clear_user_page() for modules

[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]

0day bot reports a build error:
  ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.

In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.

Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'

[ Upstream commit 6b430c7595e4eb95fae8fb54adc3c3ce002e75ae ]

A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: 8c61b7a7f4d4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n

[ Upstream commit 817f9916a6e96ae43acdd4e75459ef4f92d96eb1 ]

The CONFIG_PCI=y case got a new parameter long time ago.  Sync the stub as
well.

[bhelgaas: add parameter names]
Fixes: 725522b5453d ("PCI: add the sysfs driver name to all modules")
Link: https://lore.kernel.org/r/20210813153619.89574-1-andriy.shevchenko@linux.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethtool: Fix an error code in cxgb2.c

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920

[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add ACS quirks for Cavium multi-function devices

[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ]

Some Cavium endpoints are implemented as multi-function devices without ACS
capability, but they actually don't support peer-to-peer transactions.

Add ACS quirks to declare DMA isolation for the following devices:

  - BGX device found on Octeon-TX (8xxx)
  - CGX device found on Octeon-TX2 (9xxx)
  - RPM device found on Octeon-TX3 (10xxx)

Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: Don't use irq_create_mapping() to resolve a mapping

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]

Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.

Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()

commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream.

Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"

These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.

These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.

[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com

This patch (of 4):

Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.

As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.

Use "unsigned long" instead, just as we do in other places when handling
PFNs.  This can bite us once we have physical addresses in the range of
multiple TB.

Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()

commit 4f884f3962767877d7aabbc1ec124d2c307a4257 upstream.

Commit 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit
time") may directly retrans a multiple segments TSO/GSO packet without
split, Since this commit, we can no longer assume that a retransmitted
packet is a single segment.

This patch fixes the tp->undo_retrans accounting in tcp_sacktag_one()
that use the actual segments(pcount) of the retransmitted packet.

Before that commit (10d3be569243), the assumption underlying the
tp->undo_retrans-- seems correct.

Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: zhenggy <zhenggy@chinatelecom.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_unix: fix a data-race in unix_dgram_poll

commit 04f08eb44b5011493d77b602fdec29ff0f5c6cd5 upstream.

syzbot reported another data-race in af_unix [1]

Lets change __skb_insert() to use WRITE_ONCE() when changing
skb head qlen.

Also, change unix_dgram_poll() to use lockless version
of unix_recvq_full()

It is verry possible we can switch all/most unix_recvq_full()
to the lockless version, this will be done in a future kernel version.

[1] HEAD commit: 8596e589b787732c8346f0482919e83cc9362db1

BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll

write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0:
 __skb_insert include/linux/skbuff.h:1938 [inline]
 __skb_queue_before include/linux/skbuff.h:2043 [inline]
 __skb_queue_tail include/linux/skbuff.h:2076 [inline]
 skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264
 unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850
 sock_sendmsg_nosec net/socket.c:703 [inline]
 sock_sendmsg net/socket.c:723 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
 ___sys_sendmsg net/socket.c:2446 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2532
 __do_sys_sendmmsg net/socket.c:2561 [inline]
 __se_sys_sendmmsg net/socket.c:2558 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1:
 skb_queue_len include/linux/skbuff.h:1869 [inline]
 unix_recvq_full net/unix/af_unix.c:194 [inline]
 unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777
 sock_poll+0x23e/0x260 net/socket.c:1288
 vfs_poll include/linux/poll.h:90 [inline]
 ep_item_poll fs/eventpoll.c:846 [inline]
 ep_send_events fs/eventpoll.c:1683 [inline]
 ep_poll fs/eventpoll.c:1798 [inline]
 do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226
 __do_sys_epoll_wait fs/eventpoll.c:2238 [inline]
 __se_sys_epoll_wait fs/eventpoll.c:2233 [inline]
 __x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000001b -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G        W         5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 86b18aaa2b5b ("skbuff: fix a data race in skb_queue_len()")
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

events: Reuse value read using READ_ONCE instead of re-reading it

commit b89a05b21f46150ac10a962aa50109250b56b03b upstream.

In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.

Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: increase timeout in tipc_sk_enqueue()

commit f4bb62e64c88c93060c051195d3bbba804e56945 upstream.

In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract
socket buffer from generic queue to particular socket.
The 2 jiffies is too short in case there are other high priority
tasks get CPU cycles for multiple jiffies update. As result, no
buffer could be enqueued to particular socket.

To solve this, we switch to use constant timeout 20msecs.
Then, the function will be expired between 2 jiffies (CONFIG_100HZ)
and 20 jiffies (CONFIG_1000HZ).

Fixes: c637c1035534 ("tipc: resolve race problem at unicast message reception")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r6040: Restore MDIO clock frequency after MAC reset

commit e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 upstream.

A number of users have reported that they were not able to get the PHY
to successfully link up, especially after commit c36757eb9dee ("net:
phy: consider AN_RESTART status when reading link status") where we
stopped reading just BMSR, but we also read BMCR to determine the link
status.

Andrius at NetBSD did a wonderful job at debugging the problem
and found out that the MDIO bus clock frequency would be incorrectly set
back to its default value which would prevent the MDIO bus controller
from reading PHY registers properly. Back when we only read BMSR, if we
read all 1s, we could falsely indicate a link status, though in general
there is a cable plugged in, so this went unnoticed. After a second read
of BMCR was added, a wrong read will lead to the inability to determine
a link UP condition which is when it started to be visibly broken, even
if it was long before that.

The fix consists in restoring the value of the MD_CSR register that was
set prior to the MAC reset.

Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494
Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function")
Reported-by: Andrius V <vezhlys@gmail.com>
Reported-by: Darek Strugacz <darek.strugacz@op.pl>
Tested-by: Darek Strugacz <darek.strugacz@op.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/l2tp: Fix reference count leak in l2tp_udp_recv_core

commit 9b6ff7eb666415e1558f1ba8a742f5db6a9954de upstream.

The reference count leak issue may take place in an error handling
path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the
return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function
would directly jump to label invalid, without decrementing the reference
count of the l2tp_session object session increased earlier by
l2tp_tunnel_get_session(). This may result in refcount leaks.

Fix this issue by decrease the reference count before jumping to the
label invalid.

Fixes: 4522a70db7aa ("l2tp: fix reading optional fields of L2TPv3")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: don't duplicate ccid when cloning dccp sock

commit d9ea761fdd197351890418acd462c51f241014a7 upstream.

Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed
a UAF but reintroduced CVE-2017-6074.

When the sock is cloned, two dccps_hc_tx_ccid will reference to the
same ccid. So one can free the ccid object twice from two socks after
cloning.

This issue was found by "Hadar Manor" as well and assigned with
CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port
the patch from Ubuntu to fix it.

The patch prevents cloned socks from referencing the same ccid.

Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...")
Signed-off-by: Zhenpeng Lin <zplin@psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: dp83640: don't define PAGE0

commit 7366c23ff492ad260776a3ee1aaabba9fc773a8b upstream.

Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.

In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
    8 | #define PAGE0                     0x0000
                 from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
  187 | #define PAGE0   ((struct zeropage *)__PAGE_OFFSET)

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-caif: avoid user-triggerable WARN_ON(1)

commit 550ac9c1aaaaf51fd42e20d461f0b1cdbd55b3d2 upstream.

syszbot triggers this warning, which looks something
we can easily prevent.

If we initialize priv->list_field in chnl_net_init(),
then always use list_del_init(), we can remove robust_list_del()
completely.

WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline]
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Modules linked in:
CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline]
RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c
RSP: 0018:ffffc90009067248 EFLAGS: 00010202
RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000
RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003
RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647
R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08
R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480
FS:  00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 register_netdevice+0xadf/0x1500 net/core/dev.c:10347
 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468
 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 __sys_sendto+0x21c/0x320 net/socket.c:2036
 __do_sys_sendto net/socket.c:2048 [inline]
 __se_sys_sendto net/socket.c:2044 [inline]
 __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: cc36a070b590 ("net-caif: add CAIF netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix kern_addr_valid() to cope with existing but not present entries

commit 34b1999da935a33be6239226bfa6cd4f704c5c88 upstream.

Jiri Olsa reported a fault when running:

  # cat /proc/kallsyms | grep ksys_read
  ffffffff8136d580 T ksys_read
  # objdump -d --start-address=0xffffffff8136d580 --stop-address=0xffffffff8136d590 /proc/kcore

  /proc/kcore:     file format elf64-x86-64

  Segmentation fault

  general protection fault, probably for non-canonical address 0xf887ffcbff000: 0000 [#1] SMP PTI
  CPU: 12 PID: 1079 Comm: objdump Not tainted 5.14.0-rc5qemu+ #508
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
  RIP: 0010:kern_addr_valid
  Call Trace:
   read_kcore
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? trace_hardirqs_on
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? lock_release
   ? _raw_spin_unlock
   ? __handle_mm_fault
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_release
   proc_reg_read
   ? vfs_read
   vfs_read
   ksys_read
   do_syscall_64
   entry_SYSCALL_64_after_hwframe

The fault happens because kern_addr_valid() dereferences existent but not
present PMD in the high kernel mappings.

Such PMDs are created when free_kernel_image_pages() frees regions larger
than 2Mb. In this case, a part of the freed memory is mapped with PMDs and
the set_memory_np_noalias() -> ... -> __change_page_attr() sequence will
mark the PMD as not present rather than wipe it completely.

Have kern_addr_valid() check whether higher level page table entries are
present before trying to dereference them to fix this issue and to avoid
similar issues in the future.

Stable backporting note:
------------------------

Note that the stable marking is for all active stable branches because
there could be cases where pagetable entries exist but are not valid -
see 9a14aefc1d28 ("x86: cpa, fix lookup_address"), for example. So make
sure to be on the safe side here and use pXY_present() accessors rather
than pXY_none() which could #GP when accessing pages in the direct map.

Also see:

  c40a56a7818c ("x86/mm/init: Remove freed kernel image areas from alias mapping")

for more info.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org> # 4.4+
Link: https://lkml.kernel.org/r/20210819132717.19358-1-rppt@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: base: power: don't try to use non-existing RTC for storing data

commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream.

If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.

Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix enabling network interfaces without VFs

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream.

This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.

Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: reset legacy rtc flag for PV domU

commit f68aa100d815b5b4467fd1c3abbe3b99d65fd028 upstream.

A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:

[    1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[    1.333404] Modules linked in:
[    1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.14.0-rc7-default+ #282
[    1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[    1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[    1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002
[    1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000
[    1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d
[    1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000
[    1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200
[    1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4
[    1.333404] FS:  0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000
[    1.333404] CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660
[    1.333404] Call Trace:
[    1.333404]  ? wakeup_sources_sysfs_init+0x30/0x30
[    1.333404]  ? rdinit_setup+0x2b/0x2b
[    1.333404]  early_resume_init+0x23/0xa4
[    1.333404]  ? cn_proc_init+0x36/0x36
[    1.333404]  do_one_initcall+0x3e/0x200
[    1.333404]  kernel_init_freeable+0x232/0x28e
[    1.333404]  ? rest_init+0xd0/0xd0
[    1.333404]  kernel_init+0x16/0x120
[    1.333404]  ret_from_fork+0x1f/0x30

Cc: <stable@vger.kernel.org>
Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_proto: Send command again when timeout occurs

commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.

Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: enable accounting for pids in nested pid namespaces

commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream.

Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces.  As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.

Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.

Though recently I've noticed that it is wrong.  nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces.  The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.

Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.

Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com
Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: initialize hugetlb_usage in mm_init

commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream.

After fork, the child process will get incorrect (2x) hugetlb_usage.  If
a process uses 5 2MB hugetlb pages in an anonymous mapping,

HugetlbPages:    10240 kB

and then forks, the child will show,

HugetlbPages:    20480 kB

The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child.  Child will have 2x actual usage.

Fix this by adding hugetlb_count_init in mm_init.

Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: powernv: Fix init_chip_info initialization in numa=off

commit f34ee9cb2c5ac5af426fee6fa4591a34d187e696 upstream.

In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.

Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask

Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

        set_bit(qpair_id, ha->qpair_qid_map);
        ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS:  0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503]  ? check_preempt_curr+0x62/0x90
[ 1572.354506]  ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509]  ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511]  ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515]  ? __switch_to_asm+0x35/0x70
[ 1572.354516]  ? __switch_to_asm+0x41/0x70
[ 1572.354518]  ? __switch_to_asm+0x35/0x70
[ 1572.354519]  ? __switch_to_asm+0x41/0x70
[ 1572.354521]  ? __switch_to_asm+0x35/0x70
[ 1572.354522]  ? __switch_to_asm+0x41/0x70
[ 1572.354523]  ? __switch_to_asm+0x35/0x70
[ 1572.354525]  ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527]  ? __switch_to_asm+0x41/0x70
[ 1572.354529]  ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531]  ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532]  ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535]  ? process_one_work+0x1a7/0x360
[ 1572.354537]  ? create_worker+0x1a0/0x1a0
[ 1572.354538]  ? worker_thread+0x30/0x390
[ 1572.354540]  ? create_worker+0x1a0/0x1a0
[ 1572.354541]  ? kthread+0x116/0x130
[ 1572.354543]  ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545]  ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: BusLogic: Fix missing pr_cont() use

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix crash with signals and alloca

commit 030f653078316a9cc9ca6bd1b0234dcf858be35d upstream.

I was debugging some crashes on parisc and I found out that there is a
crash possibility if a function using alloca is interrupted by a signal.
The reason for the crash is that the gcc alloca implementation leaves
garbage in the upper 32 bits of the sp register. This normally doesn't
matter (the upper bits are ignored because the PSW W-bit is clear),
however the signal delivery routine in the kernel uses full 64 bits of sp
and it fails with -EFAULT if the upper 32 bits are not zero.

I created this program that demonstrates the problem:

#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <alloca.h>

static __attribute__((noinline,noclone)) void aa(int *size)
{
void * volatile p = alloca(-*size);
while (1) ;
}

static void handler(int sig)
{
write(1, "signal delivered\n", 17);
_exit(0);
}

int main(void)
{
int size = -0x100;
signal(SIGALRM, handler);
alarm(1);
aa(&size);
}

If you compile it with optimizations, it will crash.
The "aa" function has this disassembly:

000106a0 <aa>:
   106a0:       08 03 02 41     copy r3,r1
   106a4:       08 1e 02 43     copy sp,r3
   106a8:       6f c1 00 80     stw,ma r1,40(sp)
   106ac:       37 dc 3f c1     ldo -20(sp),ret0
   106b0:       0c 7c 12 90     stw ret0,8(r3)
   106b4:       0f 40 10 9c     ldw 0(r26),ret0 ; ret0 = 0x00000000FFFFFF00
   106b8:       97 9c 00 7e     subi 3f,ret0,ret0 ; ret0 = 0xFFFFFFFF0000013F
   106bc:       d7 80 1c 1a     depwi 0,31,6,ret0 ; ret0 = 0xFFFFFFFF00000100
   106c0:       0b 9e 0a 1e     add,l sp,ret0,sp ;   sp = 0xFFFFFFFFxxxxxxxx
   106c4:       e8 1f 1f f7     b,l,n 106c4 <aa+0x24>,r0

This patch fixes the bug by truncating the "usp" variable to 32 bits.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: w5100: check return value after calling platform_get_resource()

[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix NULL pointer reference in cipso_v4_doi_free

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix sleeping in atomic context

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]

The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:

--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
   --> ath9k_hw_reset()
      --> ath9k_hw_gpio_request_in()
         --> ath9k_hw_gpio_request()
            --> ath9k_hw_gpio_cfg_soc()

Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.

Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix OOB read ar9300_eeprom_restore_internal

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>

parport: remove non-zero check on count

[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.

Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B

[ Upstream commit 1bf56843e664eef2525bdbfae6a561e98910f676 ]

- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC

Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: i2s: Fix regmap_ops hang

[ Upstream commit 53ca9b9777b95cdd689181d7c547e38dc79adad0 ]

API 'set_fmt' maybe called when PD is off, in the situation,
any register access will hang the system. so, enable PD
before r/w register.

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-4-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip:vhci_hcd USB port can get stuck in the disabled state

[ Upstream commit 66cce9e73ec61967ed1f97f30cee79bd9a2bb7ee ]

When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.

vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.

This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.

A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).

Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: give back URBs for unsent unlink requests during cleanup

[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]

In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.

To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.

[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76

Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: musb_dsps: request_irq() after initializing musb

[ Upstream commit 7c75bde329d7e2a93cf86a5c15c61f96f1446cdc ]

If IRQ occurs between calling  dsps_setup_optional_vbus_irq()
and  dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.

The patch puts initializing of neccesery data before registration
of the interrupt handler.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"

[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix wrong release in sess_alloc_buffer() failed path

[ Upstream commit d72c74197b70bc3c95152f351a568007bffa3e11 ]

smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.

Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Enlarge select() timeout for test_maps

[ Upstream commit 2d82d73da35b72b53fe0d96350a2b8d929d07e42 ]

0Day robot observed that it's easily timeout on a heavy load host.
-------------------
 # selftests: bpf: test_maps
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 100 tasks to 'test_hashmap'
 # Fork 100 tasks to 'test_hashmap_percpu'
 # Fork 100 tasks to 'test_hashmap_sizes'
 # Fork 100 tasks to 'test_hashmap_walk'
 # Fork 100 tasks to 'test_arraymap'
 # Fork 100 tasks to 'test_arraymap_percpu'
 # Failed sockmap unexpected timeout
 not ok 3 selftests: bpf: test_maps # exit=1
 # selftests: bpf: test_lru_map
 # nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.

In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>