Merge the easy part of the IOP branch

Merge NetSilicon NS93xx tree

Fixed conflicts:

arch/arm/Makefile
arch/arm/mm/Kconfig

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports

On the n2100, both onboard r8169 ports exhibit PCI parity problems.
Set the ->broken_parity_status flag for both ports so that the r8169
drivers knows it should ignore error interrupts.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4140/1: AACI stability add ac97 timeout and retries

Add timeouts to hardware read/write/probe functions in order
to avoid lockups on buggy/broken hardware.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4139/1: AACI record support

Add PCM audio capture support for AACI audio on Versatile platform.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4138/1: AACI: multiple channel support for IRQ handling

Add AACI channel support to interrupt handler.
Also, clear underrun interrupt for correct channel.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees

[ARM] 4211/1: Provide a defconfig for ns9xxx

This is a follow up for the patch providing the base support for the
ns9xxx machine type.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4210/1: base for new machine type "NetSilicon NS9360"

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM

S3C2443_PM is not defined in our Kconfig, so
remove the reference from CPU_S3C2443 to stop
the configuration process warning about it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4221/1: S3C2443: DMA support

Add initialisation and mappings for S3C2443 DMA
system

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4220/1: S3C24XX: DMA system initialised from sysdev

This patch gets the DMA system for the S3C24XX
ready for the S3C2443, which requires 6 dma channels
at a different stride, and different base IRQ.

The DMA system is now initialised from the same
drivers which apply the DMA mappings, as well
as removing the DMA sysdev intialisation out of
the main init code (which is now being called
from a sysdev probe, so cannot add a new sysdev)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4219/1: S3C2443: DMA source definitions

Defines for the S3C2443 DMA source selection,
and update the maximum channels to 6 if the S3C2443
is selected.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443

Update the Kconfig of arch/arm/mach-s3c2443 to
add the CONFIG_CPU_S3C2443 to the list of config
variabls which mean CONFIG_CPU_S3C2412_ONLY cannot
be set

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4217/1: S3C24XX: remove the dma channel show at startup

Remove the DMA code's channel printing at startup
as this is firstly a waste of console output on
initialsaion, and secondly is going to be obsolete
once the S3C2443 DMA code has been merged

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4090/2: avoid clash between PXA and SA1111 defines

The Lubbock platform uses both a PXA25x and a SA1111 at the same time.
Both chips have the same "Serial Audio Controller" registers although
the SA1111 one is never expected to be used in preference to the PXA25x
one. So let's disable the SA1111 defines whenever compilation is for a
PXA architecture and make the PXA defines always defined.

This removes a bunch of "already defined" warnings as well since the
current hack to prevent them depended on include ordering which wasn't
always right.

While at it, clean up the SA1111 defines allowing to get rid of the
__CCREG() macro.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4216/1: add .gitignore entries for ARM specific files

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4214/2: S3C2410: Add Armzone QT2410

Patch from: Harald Welte <laforge@openmoko.org>

Add support for the Armzone QT2410 system, with
basic peripheral support for TFT display, SPI
and LEDs.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw

Introduce a platform_device (machine) specific callback function
which gets called when the amount of power we can draw from Vbus
has changed.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST

Update S3C2410_ADCTSC_XY_PST macro to allow setting the ADCTSC_XY_PST
bits.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos

Fix build glitches on ARM ... the only user of "rtc_lock" today is the
optional PC-style "CMOS" RTC driver, the legacy SA1100 RTC driver is
not even in the tree any more.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4137/1: Add kexec support

Add kexec support to ARM.

Improvements like commandline handling could be made but this patch gives
basic functional support. It uses the next available syscall number, 347.

Once the syscall number is known, userspace support will be
finalised/submitted to kexec-tools, various patches already exist.

Originally based on a patch by Maxim Syrchin but updated and forward
ported by various people.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4201/1: SMP barriers pair needed for the secondary boot process

In some situations, the pen_release store in platform_secondary_init()
may stay forever in the write buffer while the CPU is waiting on the
boot_lock to be released in boot_secondary(). The primary CPU could
never see the pen_release update without the barriers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] at91: correct value for AT91_RSTC_KEY

- Remove a duplicated define for AT91_RSTC_KEY
- Set AT91_RSTC_KEY to the correct value
- Replace the hardcoded keys in at91sam9620.c and at91sam9261.c
  by AT91_RSTC_KEY

Signed-off-by: Jan Altenberg <jan@linutronix.de>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4207/1: defconfig fixes, use RTC_DRV_AT91RM9200

When "rtc-at91" was renamed to "rtc-at91rm9200" not all the relevant
defconfig entries were updated.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4171/1: i.MX/MX1 optimize interrupt source retrieval

The macro "get_irqnr_and_base" in "entry-macro.S" optimized
according to Lennert Buytenhek suggestion.

Comments from Pavel Pisa:

 Sascha has approved patch some days ago

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4191/1: Remove redundant __flush_dcache_page() function prototype

Commit 1c9d3df5e88ad7db23f5b22f4341c39722a904a4 added function prototype
__flush_dcache_page() in include/asm-arm/cacheflush.h.  So we can remove
the prototype for same in arch/arm/mm/fault-armv.c since it is now
redundant to have it there.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4202/2: S3C2443: IRQ sub source handlers

Add IRQ handlers for the IRQs which originate
from the sub-interrupt register on the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4209/1: S3C24XX: remove unnecessary includes of iomd.h

Machines in the S3C24XX architectures should not
be including <asm/hardware/iomd.h> as this is not
needed.

Also remove commented out includes

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4206/1: SMDK2440: Fix lcd type in platform data

Set the LCD display type field in the platform data
so that the LCD driver initialise the display as an
TFT display

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4205/1: S3C2443: Add cpu specific reset hook

Hook in a cpu specific reset function for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4204/1: S3C24XX: add hook to specify cpu reset

Add hook code to specify cpu specific reset call

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4203/1: S3C2443: use S3C2412 nand driver

Use the S3C2412 nand driver for the S3C2443 as it
is register compatible.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4200/1: S3C2443: Update s3c2410_defconfig to add SMDK2443

Add SMDK2443 to s3c2410_defconfig

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4199/1: S3C2443: SMDK2443 machine addition

Add support for SMDK2443 to arch/arm/mach-s3c2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related support

Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC

This patch adds the core CPU support, clock framework, times
and initial IRQ support, as well as adding the directory into
the build tree.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4197/1: S3C2443: IRQ number updates

Update IRQ numbers for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4192/1: AT91: Support for AT91SAM9XE processors.

Add support for the Atmel AT91SAM9XE range of processors.  These are
basically AT91SAM9260's with different amounts of internal SRAM and
Flash.

We make use of the existing AT91SAM9260 support, but just perform
run-time detection of the size of the internal SRAM.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4196/1: S3C24XX: add S3C2410_IRQSUB() to define IRQ for sub-sources

Add a define of S3C2410_IRQSUB() to define all
the sources from the IRQSUB register, to make it
easier to work out the datasheet=>irq mappings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4195/1: S3C2443: include/asm-arm/arch-s3c2410/regs-serial.h updates

Updates for regs-serial.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4194/1: S3C2443: include/asm-arm/arch-s3c2410/regs-gpio.h updates

Updates for regs-gpio.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4193/1: S3C2443: clock register definitions

Clock register definitions for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4130/1: Add L220 support to RealView/EB

This patch enables the L220 on the RealView/EB MPCore platform.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge Realview GIC code

[ARM] 4109/2:  Add support for the RealView/EB MPCore revC platform

The kernel originally supported revB only. This patch enables revC by
default and adds a config option for building the kernel for the revB
platform. Since the SCU base address was hard-coded in the proc-v6.S
file (and only valid for RealView/EB revB), this patch also adds a
more generic support for defining the SCU information.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4190/2:  Add the secondary GIC support for the RealView/EB
MPCore platform

This patch adds the registration of the secondary GIC on the
baseboard, together with the IRQ chaining setup.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4108/2:  Allow multiple GIC interrupt controllers in a system

The current implementation only assumes one GIC to be present in the
system. However, there are platforms with more than one cascaded interrupt
controllers (RealView/EB MPCore for example).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4189/1: AT91: MACB Ethernet clock

The MACB Ethernet driver searches for a "macb_clk" clock, so rename the
"ether_clk" on the SAM9260 and SAM9263 to "macb_clk".

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4184/1: iop: cp6 access handler (undef_hook)

Enable svc access to cp6 via an undefined instruction hook.  Do not enable
access for usr code.

This patch also makes iop13xx select PLAT_IOP, this requires a small change
to drivers/i2c/busses/i2c-iop3xx.c.

Per Lennert Buytenhek's note, the cp6 trap routine is moved to arch/arm/plat-iop
Per Nicolas Pitre's note, the cp_wait is skipped since the latency to
return to the faulting function is longer than cp_wait.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4183/1: do_undefinstr: read svc undefined instructions with svc privileges

do_undefinstr currently does not expect undefined instructions in kernel
code, since it always uses get_user() to read the instruction.

Dereference the 'pc' pointer directly in the SVC case.

Per Nicolas Pitre's note, kernel code is never in thumb mode.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4182/1: iop3xx: fix the ioremap implementation to not remap static ranges

Implement a custom ioremap implementation for iop3xx. This saves
establishing new mappings. It also cleans up the PCI IO resource to be a
physical address rather than a virtual address as Russell pointed out on
the original iop13xx port.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4188/1: S3C24XX: add CRAMFS to s3c2410_defconfig

Add cramfs support in by default, as a lot of
our initrds are cramfs images.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4181/1: S3C24XX: Document new layout

Update Documentation/arm/Samsung-S3C24XX/Overview.txt
with the new directory layout.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4180/1: S3C24XX: Update docs for S3C2412 and S3C2413

The S3C2412 and S3C2413 are supported, so document
this as so

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4179/1: S3C2440: DMA ordering list

Add DMA ordering list for S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4178/1: S3C2410: DMA ordering list

Add DMA ordering list for S3C2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4177/1: S3C24XX: Add DMA channel allocation order

Allow the CPU code, and any board specific initialisation
code to change the allocation order of the DMA channels,
or stop a peripheral allocating any DMA at-all.

This is due to the scarce mapping of DMA channels on
some earlier S3C24XX cpus, where the selection changes
depending on the channel in use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4176/1: H1940 leds

H1940 leds device addition.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4175/1: SMDK2413: add udc pull-up control

USB gadget pull-up control and device addition
for the SMDK2413/SMDK2412 board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4174/1: H1940 usb device definitions

This patch is adding the usb device controller to the h1940 device
list. It's also adding the code to handle the usb pull-ups.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4173/1: S3C24XX usb device platform datas

This patch is adding the functions and structures used for handling the
S3C24XX udc driver platform datas.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4168/1: S3C24XX: use defines instead of numbers

Use defines instead of numbers.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4170/1: S3C2410: don't save and restore cp register 15

Don't save and restore cp register 15 since it is only a test register on S3C2410. This is probably a leftover from the PXA sleep.S from which this was derived.

Supersedes patch 4167.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4169/1: S3C2410: align to a cache line

Align the code to the start of the next cache line, rather than the start of the next 256-byte page.

(On i386 and ARM, the ".align" assembler directive takes its first argument as the number of low-order bits that must be zero, not the number of words comprising a cache line.)

Supercedes patch 4166.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4164/1: S3C2412: Add SMDK2412 to SMDK2413

Our current support for the SMDK2413 is the same
as the SMDK2412 (which is very similar), so add
SMDK2412 to the list of machines that mach-smdk2413.c
supports

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4163/1: S3C2410: minor typo in init comment

Fix a reference to s3c2440 in the s3c2410 cpu file

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Provide dummy noncoherent DMA API

We don't currently support the noncoherent DMA API, but it needs to
be provided for kernels with devres to link.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4162/1: S3C24XX: update defconfig_s3c2410 after move

Update the s3c2410_defconfig after the movement of
arch/arm/mach-s3c2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Convert dmabounce statistics to use a device attribute

Rather than printk'ing the dmabounce statistics occasionally to
the kernel log, provide a sysfs file to allow this information
to be periodically read.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Add a reference from struct device to the dma bounce info

dmabounce keeps a per-device structure, and finds the correct
structure by walking a list.  Since architectures can now add
fields to struct device, we can attach this structure direct to
the struct device, thereby eliminating the code to search the
list.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4161/1: S3C24XX: fix leakage of plat-s3c24xx Kconfig items

Do not export S3C24XX from plat-s3c24xx on non-s3c24xx systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4160/1: S3C24XX: defconfig update for 2.6.20

Update defconfig for the 2.6.20 release, and ensure that the
AML5900 machine is built.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4159/1: S3C2410: fix compile of arch/arm/mach-s3c2410/mach-aml5900.c

Fix compile of arch/arm/mach-s3c2410/mach-aml5900.c due to missing
fixes that have been applied to the rest of the tree.

Include <linux/serial_core.h> to provide the upf_t type needed for
the serial code, and remove the old static map of the SPI which is
not needed for the new spi drivers.

mach-amlm5900.c:51: include/asm/arch/regs-serial.h:200: error: parse error befo
re "upf_t"
mach-amlm5900.c:117: error: 'S3C24XX_VA_SPI' undeclared here (not in a function)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components

The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4158/1: Fix user page protection macros

The PAGE_* user page protection macros don't take into account the
configured memory policy and other architecture specific bits like
the global/ASID and shared mapping bits. Instead of constants let
these depend on a variable fixed up at init just like PAGE_KERNEL.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4156/1: S3C24XX: Add CONFIG_S3C2410_GPIO

In preperation for splitting the arch-s3c2410 directory
up, add a CONFIG_S3C2410_GPIO instead of implicitly
making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4155/1: S3C24XX: remove obj-dma-* from Makefile

In preperation for splitting the arch-s3c2410 directory
up, remove the use of obj-dma-y in the Makefile and move
to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4135/1: Add support for the L210/L220 cache controllers

This patch adds the support for the L210/L220 (outer) cache
controller. The cache range operations are done by index/way since L2
cache controller only accepts physical addresses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Use ARRAY_SIZE macro when appropriate

Use ARRAY_SIZE macro already defined in linux/kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] amba-pl010: add reference to ep93xx to Kconfig help entry

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] i.MX serial: fix IRQ allocation

If RTS interrupt is caused by RTS senzing logic inside i.MX UART module the
IRQ type cannot be set.

It applies only for interrupts going through GPIO layer.  The problem has
been noticed by Konstantin Kletschke some time ago.

  No IRQF_TRIGGER set_type function for IRQ 26 (MPU)

I would not change type to fixed 0, because it could be possible to use
different GPIO MX1 pin for RTS in the theory.  On the other hand it is only
for documentation purposes now, because RTS read code would have to be
adjusted in such case.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] i.MX serial: fix tx buffer overflows

Fix occasional tx buffer overflows in the i.MX serial driver which came
from the fact that space in the buffer was checked after sending the first
byte.  Also, fifosize is 32 bytes, not 8.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4154/1: AT91: Clock update

Unconditionally disabling the PCKs (Programmable Clocks) is not a good
idea as it breaks boards that depend on those clocks being enabled by
bootloaders.
Therefore only disable unused clocks late in the init process, giving
the board init code the chance to claim the clock.

Patch from Steven Scholz.

Since the HCK clocks on SAM9261 are already being registered as a
independent clocks, we don't need the special case for HCK0 on the
SAM9261.  Platform-init code and drivers should use the clock API to
enable/disable the clock.

Patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Always mark ARMv6 PTWs outer cacheable

Other platforms other than SMP may have an outer cache.  For these, we
also need to mark the page table walks outer cacheable.  Since marking
the walks always outer cacheable apparantly has no side effects, we
might as well always mark them so.

However, we continue to only mark PTWs shared if we have SMP enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4153/1: fix consistent_sync() off-by-one BUG check

In consistent_sync(), start + size can end up pointing one byte
beyond the end of the direct RAM mapping.  We shouldn't BUG() when
this happens.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4152/1: Add PXA SSP audio register defs and fixups

This patchs adds some missing register bit defs for the PXA SSP ports audio registers and fixes up some other broken bit definitions as noticed by Russell.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h

The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4141/1: consolidate functions that handles gpio in pxa2xx_udc

This patch renames pxa_gpio_set/get functions defined in drivers/usb/gadget/pxa2xx_udc.h to udc_gpio_set/get.

These functions are moved from drivers/usb/gadget/pxa2xx_udc.h to include/asm-arm/arch-pxa2xx/udc.h

Creates new functions: udc_gpio_to_irq, udc_gpio_init_vbus, udc_gpio_init_pullup in include/asm-arm/arch-pxa2xx/udc.h. These functions are used in drivers/usb/gadget/pxa2xx_udc.c instead of direct low-level (pxa2xx only) functions.

Creates all these udc_gpio_* functions in include/asm-arm/arch-ixp4xx/udc.h. This implementation has no real code because ixp4xx doesn't use vbus - only vbus uses all these gpio functions (and because ixp4xx misses any function which converts number of gpio pin into it's irq).

This is next step to make pxa2xx_udc fully work on ixp4xx platform.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4142/1: ep93xx: handle IRQT_NOEDGE

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4150/1: AT91: LED update

The GPIO pin setup should be handed by the platform-setup code, and not
directly by the driver.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4149/1: AT91: Overrun in SAM9 gettimeoffset().

Fix an overrun in the AT91SAM9 gettimeoffset() function.  This causes
the time value returned by gettimeofday() to jump "backwards".

Original patch from Michel Benoit.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4148/1: AT91: Physically mapped flash on CSB337 and CSB637 boards.

Define the physically mapped flash on the Cogent CSB337 and CSB637
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4147/1: AT91: Define Timer/Counter clocks.

Define the Timer/Counter Unit clocks on the AT91RM9200, AT91SAM9260 and
AT91SAM9261 processors.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4146/1: AT91: Support for AT91SAM9263-EK board.

Add support for the Atmel AT91SAM9263-EK board.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor

Add support for the Atmel AT91SAM9263 processor.  It is similar to the
AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4119/1: AT91: Fix build of AT91SAM9260

Fix build failure of AT91SAM9260.

The AT91RM9200 ethernet driver (at91_ether.c) stores platform data in a
"struct at91_eth_data" structure, but the AT91SAM9260 (and AT91SAM9263)
ethernet driver (macb.c) [developed on the AVR32 architecture] expects a
"struct eth_platform_data".

Since the platform data of the two drivers is very similar, we continue
to use the "struct at91_eth_data" for all AT91 processors but add a
    #define eth_platform_data      at91_eth_data
in board.h to keep the MACB driver happy.

Original patch by Jan Altenberg.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Convert DMA cache handling to take const void * args

The DMA cache handling functions take virtual addresses, but in the
form of unsigned long arguments.  This leads to a little confusion
about what exactly they take.  So, convert them to take const void *
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4134/1: Add generic support for outer caches

The outer cache can be L2 as on RealView/EB MPCore platform or even L3
or further on ARMv7 cores. This patch adds the generic support for
flushing the outer cache in the DMA operations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>