Merge 4.14.306 into android-4.14-q

Changes in 4.14.306
firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
netrom: Fix use-after-free caused by accept on already connected socket
squashfs: harden sanity check in squashfs_read_xattr_id_table
sctp: do not check hb_timer.expires when resetting hb_timer
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
scsi: target: core: Fix warning on RT kernels
scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
net/x25: Fix to not accept on connected socket
usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
fbcon: Check font dimension limits
watchdog: diag288_wdt: do not use stack buffers for hardware data
watchdog: diag288_wdt: fix __diag288() inline assembly
efi: Accept version 2 of memory attributes table
iio: hid: fix the retval in accel_3d_capture_sample
iio: adc: berlin2-adc: Add missing of_node_put() in error path
iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
parisc: Fix return code of pdc_iodc_print()
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/swapfile: add cond_resched() in get_swap_pages()
Squashfs: fix handling and sanity checking of xattr_ids count
serial: 8250_dma: Fix DMA Rx completion race
serial: 8250_dma: Fix DMA Rx rearm race
btrfs: limit device extents to the device size
ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
ALSA: pci: lx6464es: fix a debug loop
pinctrl: aspeed: Fix confusing types in return value
pinctrl: single: fix potential NULL dereference
net: USB: Fix wrong-direction WARNING in plusb.c
usb: core: add quirk for Alcor Link AK9563 smartcard reader
migrate: hugetlb: check for hugetlb shared PMD in node migration
tools/virtio: fix the vringh test for virtio ring changes
net/rose: Fix to not accept on connected socket
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
aio: fix mremap after fork null-deref
Revert "x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN"
mmc: sdio: fix possible resource leaks in some error paths
ALSA: hda/conexant: add a new hda codec SN6180
hugetlb: check for undefined shift on 32 bit architectures
revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
i40e: add double of VLAN header when computing the max MTU
net: bgmac: fix BCM5358 support by setting correct flags
dccp/tcp: Avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions.
net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
net: stmmac: Restrict warning on disabling DMA store and fwd mode
net: mpls: fix stale pointer if allocation fails during device rename
ipv6: Fix datagram socket connection with DSCP.
ipv6: Fix tcp socket connection with DSCP.
i40e: Add checking for null for nlmsg_find_attr()
kvm: initialize all of the kvm_debugregs structure before sending it to userspace
nilfs2: fix underflow in second superblock position calculations
Linux 4.14.306

Change-Id: Ic9885729bdbc06c5c70faf43db25137b071005ea
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.14.306

Link: https://lore.kernel.org/r/20230220133548.158615609@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix underflow in second superblock position calculations

commit 99b9402a36f0799f25feee4465bfa4b8dfa74b4d upstream.

Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second
superblock, underflows when the argument device size is less than 4096
bytes.  Therefore, when using this macro, it is necessary to check in
advance that the device size is not less than a lower limit, or at least
that underflow does not occur.

The current nilfs2 implementation lacks this check, causing out-of-bound
block access when mounting devices smaller than 4096 bytes:

 I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0
 phys_seg 1 prio class 2
 NILFS (loop0): unable to read secondary superblock (blocksize = 1024)

In addition, when trying to resize the filesystem to a size below 4096
bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number
of segments to nilfs_sufile_resize(), corrupting parameters such as the
number of segments in superblocks.  This causes excessive loop iterations
in nilfs_sufile_resize() during a subsequent resize ioctl, causing
semaphore ns_segctor_sem to block for a long time and hang the writer
thread:

 INFO: task segctord:5067 blocked for more than 143 seconds.
      Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:segctord        state:D stack:23456 pid:5067  ppid:2
 flags:0x00004000
 Call Trace:
  <TASK>
  context_switch kernel/sched/core.c:5293 [inline]
  __schedule+0x1409/0x43f0 kernel/sched/core.c:6606
  schedule+0xc3/0x190 kernel/sched/core.c:6682
  rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190
  nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357
  nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline]
  nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570
  kthread+0x270/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
  </TASK>
 ...
 Call Trace:
  <TASK>
  folio_mark_accessed+0x51c/0xf00 mm/swap.c:515
  __nilfs_get_page_block fs/nilfs2/page.c:42 [inline]
  nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61
  nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121
  nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176
  nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251
  nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline]
  nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline]
  nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777
  nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422
  nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline]
  nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301
  ...

This fixes these issues by inserting appropriate minimum device size
checks or anti-underflow checks, depending on where the macro is used.

Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com
Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: initialize all of the kvm_debugregs structure before sending it to userspace

commit 2c10b61421a28e95a46ab489fd56c0f442ff6952 upstream.

When calling the KVM_GET_DEBUGREGS ioctl, on some configurations, there
might be some unitialized portions of the kvm_debugregs structure that
could be copied to userspace.  Prevent this as is done in the other kvm
ioctls, by setting the whole structure to 0 before copying anything into
it.

Bonus is that this reduces the lines of code as the explicit flag
setting and reserved space zeroing out can be removed.

Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <x86@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@kernel.org>
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230214103304.3689213-1-gregkh@linuxfoundation.org>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Add checking for null for nlmsg_find_attr()

[ Upstream commit 7fa0b526f865cb42aa33917fd02a92cb03746f4d ]

The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Fix tcp socket connection with DSCP.

commit 8230680f36fd1525303d1117768c8852314c488c upstream.

Take into account the IPV6_TCLASS socket option (DSCP) in
tcp_v6_connect(). Otherwise fib6_rule_match() can't properly
match the DSCP value, resulting in invalid route lookup.

For example:

  ip route add unreachable table main 2001:db8::10/124

  ip route add table 100 2001:db8::10/124 dev eth0
  ip -6 rule add dsfield 0x04 table 100

  echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04

Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.

Fixes: 2cc67cc731d9 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix datagram socket connection with DSCP.

commit e010ae08c71fda8be3d6bda256837795a0b3ea41 upstream.

Take into account the IPV6_TCLASS socket option (DSCP) in
ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't
properly match the DSCP value, resulting in invalid route lookup.

For example:

  ip route add unreachable table main 2001:db8::10/124

  ip route add table 100 2001:db8::10/124 dev eth0
  ip -6 rule add dsfield 0x04 table 100

  echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04

Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.

Fixes: 2cc67cc731d9 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mpls: fix stale pointer if allocation fails during device rename

commit fda6c89fe3d9aca073495a664e1d5aea28cd4377 upstream.

lianhui reports that when MPLS fails to register the sysctl table
under new location (during device rename) the old pointers won't
get overwritten and may be freed again (double free).

Handle this gracefully. The best option would be unregistering
the MPLS from the device completely on failure, but unfortunately
mpls_ifdown() can fail. So failing fully is also unreliable.

Another option is to register the new table first then only
remove old one if the new one succeeds. That requires more
code, changes order of notifications and two tables may be
visible at the same time.

sysctl point is not used in the rest of the code - set to NULL
on failures and skip unregister if already NULL.

Reported-by: lianhui tang <bluetlh@gmail.com>
Fixes: 0fae3bf018d9 ("mpls: handle device renames for per-device sysctls")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Restrict warning on disabling DMA store and fwd mode

commit 05d7623a892a9da62da0e714428e38f09e4a64d8 upstream.

When setting 'snps,force_thresh_dma_mode' DT property, the following
warning is always emitted, regardless the status of force_sf_dma_mode:

dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.

Do not print the rather misleading message when DMA store and forward
mode is already disabled.

Fixes: e2a240c7d3bc ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path

commit c68f345b7c425b38656e1791a0486769a8797016 upstream.

syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]

With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.

1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/

Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com
Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp/tcp: Avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions.

commit ca43ccf41224b023fc290073d5603a755fd12eed upstream.

Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.

We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.

Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.

[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/

Fixes: 323fbd0edf3f ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bgmac: fix BCM5358 support by setting correct flags

commit d61615c366a489646a1bfe5b33455f916762d5f4 upstream.

Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.

Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.

Link: https://github.com/openwrt/openwrt/issues/8278
Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: add double of VLAN header when computing the max MTU

commit ce45ffb815e8e238f05de1630be3969b6bb15e4e upstream.

Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.

Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"

commit a5b21d8d791cd4db609d0bbcaa9e0c7e019888d1 upstream.

This fix was nacked by Philip, for reasons identified in the email linked
below.

Link: https://lkml.kernel.org/r/68f15d67-8945-2728-1f17-5b53a80ec52d@squashfs.org.uk
Fixes: 72e544b1b28325 ("squashfs: harden sanity check in squashfs_read_xattr_id_table")
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: check for undefined shift on 32 bit architectures

commit ec4288fe63966b26d53907212ecd05dfa81dd2cc upstream.

Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls.  This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size.  The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure.  Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:

1UL << page_size_log

Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63.  This is fine on 64 bit architectures where a long is 64
bits.  However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior.  This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.

Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.

Fix by comparing page_size_log to BITS_PER_LONG before doing shift.

Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant: add a new hda codec SN6180

commit 18d7e16c917a08f08778ecf2b780d63648d5d923 upstream.

The current kernel does not support the SN6180 codec chip.
Add the SN6180 codec configuration item to kernel.

Signed-off-by: Bo Liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1675908828-1012-1-git-send-email-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdio: fix possible resource leaks in some error paths

commit 605d9fb9556f8f5fb4566f4df1480f280f308ded upstream.

If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().

To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().

In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.

Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.

unreferenced object 0xffff888112514000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
  hex dump (first 32 bytes):
    00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff  ..o.....`X......
    10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff  .@Q......@Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
    [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
    [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

unreferenced object 0xffff888112511000 (size 2048):
  comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
  hex dump (first 32 bytes):
    00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff  .@Q......X......
    10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff  ..Q.......Q.....
  backtrace:
    [<000000009e5931da>] kmalloc_trace+0x21/0x110
    [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
    [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
    [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]

Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN"

This reverts commit 67c6d79777cf5d3165d6d2e2d7c5e37333d1a76e which is
commit 55228db2697c09abddcb9487c3d9fa5854a932cd upstream.

_Alignof is not in the gcc version that the 4.14.y kernel still
supports (3.2), so this change needs to be reverted as it breaks the
build on those older compiler versions.

Reported-by: Michael Nies <michael.nies@netclusive.com>
Link: https://lore.kernel.org/r/HE1PR0902MB188277E37DED663AE440510BE1D99@HE1PR0902MB1882.eurprd09.prod.outlook.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217013
Cc: YingChi Long <me@inclyc.cn>
Cc: Borislav Petkov <bp@suse.de>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: fix mremap after fork null-deref

commit 81e9d6f8647650a7bead74c5f926e29970e834d1 upstream.

Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced
a null-deref if mremap is called on an old aio mapping after fork as
mm->ioctx_table will be set to NULL.

[jmoyer@redhat.com: fix 80 column issue]
Link: https://lkml.kernel.org/r/x49sffq4nvg.fsf@segfault.boston.devel.redhat.com
Fixes: e4a0d3e720e7 ("aio: Make it possible to remap aio ring")
Signed-off-by: Seth Jenkins <sethjenkins@google.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Jann Horn <jannh@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association

[ Upstream commit 0cab4404874f2de52617de8400c844891c6ea1ce ]

As part of nvmet_fc_ls_create_association there is a case where
nvmet_fc_alloc_target_queue fails right after a new association with an
admin queue is created. In this case, no one releases the get taken in
nvmet_fc_alloc_target_assoc.  This fix is adding the missing put.

Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rose: Fix to not accept on connected socket

[ Upstream commit 14caefcf9837a2be765a566005ad82cd0d2a429f ]

If you call listen() and accept() on an already connect()ed
rose socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and rose_accept() dequeues
the skb waiting in the sk->sk_receive_queue.

This creates a child socket with the sk of the parent
rose socket, which can cause confusion.

Fix rose_listen() to return -EINVAL if the socket has
already been successfully connected, and add lock_sock
to prevent this issue.

Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230125105944.GA133314@ubuntu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/virtio: fix the vringh test for virtio ring changes

[ Upstream commit 3f7b75abf41cc4143aa295f62acbb060a012868d ]

Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

migrate: hugetlb: check for hugetlb shared PMD in node migration

commit 73bdf65ea74857d7fb2ec3067a3cec0e261b1462 upstream.

migrate_pages/mempolicy semantics state that CAP_SYS_NICE is required to
move pages shared with another process to a different node.  page_mapcount
> 1 is being used to determine if a hugetlb page is shared.  However, a
hugetlb page will have a mapcount of 1 if mapped by multiple processes via
a shared PMD.  As a result, hugetlb pages shared by multiple processes and
mapped with a shared PMD can be moved by a process without CAP_SYS_NICE.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
consider the page shared.

Link: https://lkml.kernel.org/r/20230126222721.222195-3-mike.kravetz@oracle.com
Fixes: e2d8cf405525 ("migrate: add hugepage migration code to migrate_pages()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: add quirk for Alcor Link AK9563 smartcard reader

commit 303e724d7b1e1a0a93daf0b1ab5f7c4f53543b34 upstream.

The Alcor Link AK9563 smartcard reader used on some Lenovo platforms
doesn't work. If LPM is enabled the reader will provide an invalid
usb config descriptor. Added quirk to disable LPM.

Verified fix on Lenovo P16 G1 and T14 G3

Tested-by: Miroslav Zatko <mzatko@mirexoft.com>
Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: USB: Fix wrong-direction WARNING in plusb.c

commit 811d581194f7412eda97acc03d17fc77824b561f upstream.

The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write.  In modern kernels this error provokes a WARNING:

usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
 <TASK>
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
 pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
 pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
 pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
 __dev_open+0x297/0x4d0 net/core/dev.c:1417
 __dev_change_flags+0x587/0x750 net/core/dev.c:8530
 dev_change_flags+0x97/0x170 net/core/dev.c:8602
 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
 sock_do_ioctl+0xcc/0x230 net/socket.c:1169
 sock_ioctl+0x1f8/0x680 net/socket.c:1286
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.

Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: single: fix potential NULL dereference

[ Upstream commit d2d73e6d4822140445ad4a7b1c6091e0f5fe703b ]

Added checking of pointer "function" in pcs_set_mux().
pinmux_generic_get_function() can return NULL and the pointer
"function" was dereferenced without checking against NULL.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: aspeed: Fix confusing types in return value

[ Upstream commit 287a344a11f1ebd31055cf9b22c88d7005f108d7 ]

The function signature is int, but we return a bool. Instead return a
negative errno as the kerneldoc suggests.

Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20230119231856.52014-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pci: lx6464es: fix a debug loop

[ Upstream commit 5dac9f8dc25fefd9d928b98f6477ff3daefd73e3 ]

This loop accidentally reuses the "i" iterator for both the inside and
the outside loop.  The value of MAX_STREAM_BUFFER is 5.  I believe that
chip->rmh.stat_len is in the 2-12 range.  If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.

It looks like it was supposed to combined into one loop where
conditions are checked.

Fixes: 8e6320064c33 ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()

commit 6a32425f953b955b4ff82f339d01df0b713caa5d upstream.

snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: limit device extents to the device size

commit 3c538de0f2a74d50aff7278c092f88ae59cee688 upstream.

There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator").  This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches.  The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.

The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent.  However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size.  We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size.  This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.

Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx rearm race

commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0 CPU1
dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

  spin_lock_irqsave(&port->lock)
  // sees dma->rx_running = 1
  __dma_rx_complete()
    dma->rx_running = 0
    // Incorrectly complete
    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx completion race

commit 31352811e13dc2313f101b890fd4b1ce760b5fe7 upstream.

__dma_rx_complete() is called from two places:
  - Through the DMA completion callback dma_rx_complete()
  - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT
The former does not hold port's lock during __dma_rx_complete() which
allows these two to race and potentially insert the same data twice.

Extend port's lock coverage in dma_rx_complete() to prevent the race
and check if the DMA Rx is still pending completion before calling
into __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Squashfs: fix handling and sanity checking of xattr_ids count

commit f65c4bbbd682b0877b669828b4e033b8d5d0a2dc upstream.

A Sysbot [1] corrupted filesystem exposes two flaws in the handling and
sanity checking of the xattr_ids count in the filesystem.  Both of these
flaws cause computation overflow due to incorrect typing.

In the corrupted filesystem the xattr_ids value is 4294967071, which
stored in a signed variable becomes the negative number -225.

Flaw 1 (64-bit systems only):

The signed integer xattr_ids variable causes sign extension.

This causes variable overflow in the SQUASHFS_XATTR_*(A) macros.  The
variable is first multiplied by sizeof(struct squashfs_xattr_id) where the
type of the sizeof operator is "unsigned long".

On a 64-bit system this is 64-bits in size, and causes the negative number
to be sign extended and widened to 64-bits and then become unsigned.  This
produces the very large number 18446744073709548016 or 2^64 - 3600.  This
number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and
divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0
(stored in len).

Flaw 2 (32-bit systems only):

On a 32-bit system the integer variable is not widened by the unsigned
long type of the sizeof operator (32-bits), and the signedness of the
variable has no effect due it always being treated as unsigned.

The above corrupted xattr_ids value of 4294967071, when multiplied
overflows and produces the number 4294963696 or 2^32 - 3400.  This number
when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by
SQUASHFS_METADATA_SIZE overflows again and produces a length of 0.

The effect of the 0 length computation:

In conjunction with the corrupted xattr_ids field, the filesystem also has
a corrupted xattr_table_start value, where it matches the end of
filesystem value of 850.

This causes the following sanity check code to fail because the
incorrectly computed len of 0 matches the incorrect size of the table
reported by the superblock (0 bytes).

    len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
    indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids);

    /*
     * The computed size of the index table (len bytes) should exactly
     * match the table start and end points
    */
    start = table_start + sizeof(*id_table);
    end = msblk->bytes_used;

    if (len != (end - start))
            return ERR_PTR(-EINVAL);

Changing the xattr_ids variable to be "usigned int" fixes the flaw on a
64-bit system.  This relies on the fact the computation is widened by the
unsigned long type of the sizeof operator.

Casting the variable to u64 in the above macro fixes this flaw on a 32-bit
system.

It also means 64-bit systems do not implicitly rely on the type of the
sizeof operator to widen the computation.

[1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/

Link: https://lkml.kernel.org/r/20230127061842.10965-1-phillip@squashfs.org.uk
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/swapfile: add cond_resched() in get_swap_pages()

commit 7717fc1a12f88701573f9ed897cc4f6699c661e3 upstream.

The softlockup still occurs in get_swap_pages() under memory pressure.  64
CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram
device is 50MB with same priority as si.  Use the stress-ng tool to
increase memory pressure, causing the system to oom frequently.

The plist_for_each_entry_safe() loops in get_swap_pages() could reach tens
of thousands of times to find available space (extreme case:
cond_resched() is not called in scan_swap_map_slots()).  Let's add
cond_resched() into get_swap_pages() when failed to find available space
to avoid softlockup.

Link: https://lkml.kernel.org/r/20230128094757.1060525-1-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps

commit 3489dbb696d25602aea8c3e669a6d43b76bd5358 upstream.

Patch series "Fixes for hugetlb mapcount at most 1 for shared PMDs".

This issue of mapcount in hugetlb pages referenced by shared PMDs was
discussed in [1].  The following two patches address user visible behavior
caused by this issue.

[1] https://lore.kernel.org/linux-mm/Y9BF+OCdWnCSilEu@monkey/

This patch (of 2):

A hugetlb page will have a mapcount of 1 if mapped by multiple processes
via a shared PMD.  This is because only the first process increases the
map count, and subsequent processes just add the shared PMD page to their
page table.

page_mapcount is being used to decide if a hugetlb page is shared or
private in /proc/PID/smaps.  Pages referenced via a shared PMD were
incorrectly being counted as private.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
count the hugetlb page as shared.  A new helper to check for a shared PMD
is added.

[akpm@linux-foundation.org: simplification, per David]
[akpm@linux-foundation.org: hugetlb.h: include page_ref.h for page_count()]
Link: https://lkml.kernel.org/r/20230126222721.222195-2-mike.kravetz@oracle.com
Fixes: 25ee01a2fca0 ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case

commit 316f1f42b5cc1d95124c1f0387c867c1ba7b6d0e upstream.

Wire up the missing ptrace requests PTRACE_GETREGS, PTRACE_SETREGS,
PTRACE_GETFPREGS and PTRACE_SETFPREGS when running 32-bit applications
on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix return code of pdc_iodc_print()

commit 5d1335dabb3c493a3d6d5b233953b6ac7b6c1ff2 upstream.

There is an off-by-one if the printed string includes a new-line
char.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurements of VUSB, VBAT and others

commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream.

Some inputs need to be wired up to produce proper measurements,
without this change only near zero values are reported.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: berlin2-adc: Add missing of_node_put() in error path

commit cbd3a0153cd18a2cbef6bf3cf31bb406c3fc9f55 upstream.

of_get_parent() will return a device_node pointer with refcount
incremented. We need to use of_node_put() on it when done. Add the
missing of_node_put() in the error path of berlin2_adc_probe();

Fixes: 70f1937911ca ("iio: adc: add support for Berlin")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hid: fix the retval in accel_3d_capture_sample

commit f7b23d1c35d8b8de1425bdfccaefd01f3b7c9d1c upstream.

Return value should be zero for success. This was forgotten for timestamp
feature. Verified on RealSense cameras.

Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp")
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Link: https://lore.kernel.org/r/a6dc426498221c81fa71045b41adf782ebd42136.camel@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Accept version 2 of memory attributes table

commit 636ab417a7aec4ee993916e688eb5c5977570836 upstream.

UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: diag288_wdt: fix __diag288() inline assembly

commit 32e40f9506b9e32917eb73154f93037b443124d1 upstream.

The DIAG 288 statement consumes an EBCDIC string the address of which is
passed in a register. Use a "memory" clobber to tell the compiler that
memory is accessed within the inline assembly.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: diag288_wdt: do not use stack buffers for hardware data

commit fe8973a3ad0905cb9ba2d42db42ed51de14737df upstream.

With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data passed to a hardware or a hypervisor interface that
requires V=R can no longer be allocated on the stack.

Use kmalloc() to get memory for a diag288 command.

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Check font dimension limits

commit 2b09d5d364986f724f17001ccfe4126b9b43a0be upstream.

blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.

The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:

http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com
Kernel Branch: 6.2.0-rc5-next-20230124
Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing
Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing

Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver")
Cc: stable@vger.kernel.org
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait

[ Upstream commit 921deb9da15851425ccbb6ee409dc2fd8fbdfe6b ]

__ffs_ep0_queue_wait executes holding the spinlock of &ffs->ev.waitq.lock
and unlocks it after the assignments to usb_request are done.
However in the code if the request is already NULL we bail out returning
-EINVAL but never unlocked the spinlock.

Fix this by adding spin_unlock_irq &ffs->ev.waitq.lock before returning.

Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230124091149.18647-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/x25: Fix to not accept on connected socket

[ Upstream commit f2b0b5210f67c56a3bcdf92ff665fb285d6e0067 ]

When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.

This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.

Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.

Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress

[ Upstream commit f484a794e4ee2a9ce61f52a78e810ac45f3fe3b3 ]

If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails,
userspace could be accessing the host's ipaddress attr. If we then free the
session via iscsi_session_teardown() while userspace is still accessing the
session we will hit a use after free bug.

Set the tcp_sw_host->session after we have completed session creation and
can no longer fail.

Link: https://lore.kernel.org/r/20230117193937.21244-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: core: Fix warning on RT kernels

[ Upstream commit 84ed64b1a7a7fcd507598dee7708c1f225123711 ]

Calling spin_lock_irqsave() does not disable the interrupts on realtime
kernels, remove the warning and replace assert_spin_locked() with
lockdep_assert_held().

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix flow memory leak in ovs_flow_cmd_new

[ Upstream commit 0c598aed445eb45b0ee7ba405f7ece99ee349c30 ]

Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is
not freed when an allocation of a key fails.

BUG: memory leak
unreferenced object 0xffff888116668000 (size 632):
  comm "syz-executor231", pid 1090, jiffies 4294844701 (age 18.871s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline]
    [<00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77
    [<00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957
    [<0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739
    [<00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
    [<00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800
    [<000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515
    [<0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
    [<000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
    [<000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339
    [<000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934
    [<00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline]
    [<00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671
    [<00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356
    [<00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410
    [<0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
    [<00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
    [<000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

To fix this the patch rearranges the goto labels to reflect the order of
object allocations and adds appropriate goto statements on the error
paths.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 68bb10101e6b ("openvswitch: Fix flow lookup to use unmasked key")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230201210218.361970-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: do not check hb_timer.expires when resetting hb_timer

[ Upstream commit 8f35ae17ef565a605de5f409e04bcd49a55d7646 ]

It tries to avoid the frequently hb_timer refresh in commit ba6f5e33bdbb
("sctp: avoid refreshing heartbeat timer too often"), and it only allows
mod_timer when the new expires is after hb_timer.expires. It means even
a much shorter interval for hb timer gets applied, it will have to wait
until the current hb timer to time out.

In sctp_do_8_2_transport_strike(), when a transport enters PF state, it
expects to update the hb timer to resend a heartbeat every rto after
calling sctp_transport_reset_hb_timer(), which will not work as the
change mentioned above.

The frequently hb_timer refresh was caused by sctp_transport_reset_timers()
called in sctp_outq_flush() and it was already removed in the commit above.
So we don't have to check hb_timer.expires when resetting hb_timer as it is
now not called very often.

Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/d958c06985713ec84049a2d5664879802710179a.1675095933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

squashfs: harden sanity check in squashfs_read_xattr_id_table

[ Upstream commit 72e544b1b28325fe78a4687b980871a7e4101f76 ]

While mounting a corrupted filesystem, a signed integer '*xattr_ids' can
become less than zero.  This leads to the incorrect computation of 'len'
and 'indexes' values which can cause null-ptr-deref in copy_bio_to_actor()
or out-of-bounds accesses in the next sanity checks inside
squashfs_read_xattr_id_table().

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Link: https://lkml.kernel.org/r/20230117105226.329303-2-pchelkin@ispras.ru
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: Fix use-after-free caused by accept on already connected socket

[ Upstream commit 611792920925fb088ddccbe2783c7f92fdfb6b64 ]

If you call listen() and accept() on an already connect()ed
AF_NETROM socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and nr_accept() dequeues
the skb waiting in the sk->sk_receive_queue.

As a result, nr_accept() allocates and returns a sock with
the sk of the parent AF_NETROM socket.

And here use-after-free can happen through complex race conditions:
```
                  cpu0                                                     cpu1
                                                               1. socket_2 = socket(AF_NETROM)
                                                                        .
                                                                        .
                                                                  listen(socket_2)
                                                                  accepted_socket = accept(socket_2)
       2. socket_1 = socket(AF_NETROM)
            nr_create()    // sk refcount : 1
          connect(socket_1)
                                                               3. write(accepted_socket)
                                                                    nr_sendmsg()
                                                                    nr_output()
                                                                    nr_kick()
                                                                    nr_send_iframe()
                                                                    nr_transmit_buffer()
                                                                    nr_route_frame()
                                                                    nr_loopback_queue()
                                                                    nr_loopback_timer()
                                                                    nr_rx_frame()
                                                                    nr_process_rx_frame(sk, skb);    // sk : socket_1's sk
                                                                    nr_state3_machine()
                                                                    nr_queue_rx_frame()
                                                                    sock_queue_rcv_skb()
                                                                    sock_queue_rcv_skb_reason()
                                                                    __sock_queue_rcv_skb()
                                                                    __skb_queue_tail(list, skb);    // list : socket_1's sk->sk_receive_queue
       4. listen(socket_1)
            nr_listen()
          uaf_socket = accept(socket_1)
            nr_accept()
            skb_dequeue(&sk->sk_receive_queue);
                                                               5. close(accepted_socket)
                                                                    nr_release()
                                                                    nr_write_internal(sk, NR_DISCREQ)
                                                                    nr_transmit_buffer()    // NR_DISCREQ
                                                                    nr_route_frame()
                                                                    nr_loopback_queue()
                                                                    nr_loopback_timer()
                                                                    nr_rx_frame()    // sk : socket_1's sk
                                                                    nr_process_rx_frame()  // NR_STATE_3
                                                                    nr_state3_machine()    // NR_DISCREQ
                                                                    nr_disconnect()
                                                                    nr_sk(sk)->state = NR_STATE_0;
       6. close(socket_1)    // sk refcount : 3
            nr_release()    // NR_STATE_0
            sock_put(sk);    // sk refcount : 0
            sk_free(sk);
          close(uaf_socket)
            nr_release()
            sock_hold(sk);    // UAF
```

KASAN report by syzbot:
```
BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520
Write of size 4 at addr ffff8880235d8080 by task syz-executor564/5128

Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x15e/0x461 mm/kasan/report.c:417
 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x141/0x190 mm/kasan/generic.c:189
 instrument_atomic_read_write include/linux/instrumented.h:102 [inline]
 atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:116 [inline]
 __refcount_add include/linux/refcount.h:193 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 sock_hold include/net/sock.h:775 [inline]
 nr_release+0x66/0x460 net/netrom/af_netrom.c:520
 __sock_release+0xcd/0x280 net/socket.c:650
 sock_close+0x1c/0x20 net/socket.c:1365
 __fput+0x27c/0xa90 fs/file_table.c:320
 task_work_run+0x16f/0x270 kernel/task_work.c:179
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0xaa8/0x2950 kernel/exit.c:867
 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
 get_signal+0x21c3/0x2450 kernel/signal.c:2859
 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
 exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
 exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6c19e3c9b9
Code: Unable to access opcode bytes at 0x7f6c19e3c98f.
RSP: 002b:00007fffd4ba2ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: 0000000000000116 RBX: 0000000000000003 RCX: 00007f6c19e3c9b9
RDX: 0000000000000318 RSI: 00000000200bd000 RDI: 0000000000000006
RBP: 0000000000000003 R08: 000000000000000d R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000246 R12: 000055555566a2c0
R13: 0000000000000011 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

Allocated by task 5128:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 ____kasan_kmalloc mm/kasan/common.c:371 [inline]
 ____kasan_kmalloc mm/kasan/common.c:330 [inline]
 __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __do_kmalloc_node mm/slab_common.c:968 [inline]
 __kmalloc+0x5a/0xd0 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 sk_prot_alloc+0x140/0x290 net/core/sock.c:2038
 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091
 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433
 __sock_create+0x359/0x790 net/socket.c:1515
 sock_create net/socket.c:1566 [inline]
 __sys_socket_create net/socket.c:1603 [inline]
 __sys_socket_create net/socket.c:1588 [inline]
 __sys_socket+0x133/0x250 net/socket.c:1636
 __do_sys_socket net/socket.c:1649 [inline]
 __se_sys_socket net/socket.c:1647 [inline]
 __x64_sys_socket+0x73/0xb0 net/socket.c:1647
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 5128:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200
 kasan_slab_free include/linux/kasan.h:177 [inline]
 __cache_free mm/slab.c:3394 [inline]
 __do_kmem_cache_free mm/slab.c:3580 [inline]
 __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587
 sk_prot_free net/core/sock.c:2074 [inline]
 __sk_destruct+0x5df/0x750 net/core/sock.c:2166
 sk_destruct net/core/sock.c:2181 [inline]
 __sk_free+0x175/0x460 net/core/sock.c:2192
 sk_free+0x7c/0xa0 net/core/sock.c:2203
 sock_put include/net/sock.h:1991 [inline]
 nr_release+0x39e/0x460 net/netrom/af_netrom.c:554
 __sock_release+0xcd/0x280 net/socket.c:650
 sock_close+0x1c/0x20 net/socket.c:1365
 __fput+0x27c/0xa90 fs/file_table.c:320
 task_work_run+0x16f/0x270 kernel/task_work.c:179
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0xaa8/0x2950 kernel/exit.c:867
 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
 get_signal+0x21c3/0x2450 kernel/signal.c:2859
 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
 exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
 exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
```

To fix this issue, nr_listen() returns -EINVAL for sockets that
successfully nr_connect().

Reported-by: syzbot+caa188bdfc1eeafeb418@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()

[ Upstream commit b9cee506da2b7920b5ea02ccd8e78a907d0ee7aa ]

snd_hda_get_connections() can return a negative error code.
It may lead to accessing 'conn' array at a negative index.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 30b4503378c9 ("ALSA: hda - Expose secret DAC-AA connection of some VIA codecs")
Link: https://lore.kernel.org/r/20230119082259.3634-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

[ Upstream commit f71eaf2708be7831428eacae7db25d8ec6b8b4c5 ]

The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region

commit 531390a243ef47448f8bad01c186c2787666bf4d upstream.

This patch is fix for Linux kernel v2.6.33 or later.

For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem
have had an issue of use-after-free. The subsystem allows multiple
user space listeners to the region, while data of the payload was likely
released before the listeners execute read(2) to access to it for copying
to user space.

The issue was fixed by a commit 281e20323ab7 ("firewire: core: fix
use-after-free regression in FCP handler"). The object of payload is
duplicated in kernel space for each listener. When the listener executes
ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to
be released.

However, it causes memory leak since the commit relies on call of
release_request() in drivers/firewire/core-cdev.c. Against the
expectation, the function is never called due to the design of
release_client_resource(). The function delegates release task
to caller when called with non-NULL fourth argument. The implementation
of ioctl_send_response() is the case. It should release the object
explicitly.

This commit fixes the bug.

Cc: <stable@vger.kernel.org>
Fixes: 281e20323ab7 ("firewire: core: fix use-after-free regression in FCP handler")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230117090610.93792-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.14.305 into android-4.14-q

Changes in 4.14.305
ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'
HID: intel_ish-hid: Add check for ishtp_dma_tx_map
EDAC/highbank: Fix memory leak in highbank_mc_probe()
tomoyo: fix broken dependency on *.conf.default
IB/hfi1: Reject a zero-length user expected buffer
IB/hfi1: Reserve user expected TIDs
affs: initialize fsdata in affs_truncate()
amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent
phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
net: nfc: Fix use-after-free in local_cleanup()
wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
net: usb: sr9700: Handle negative len
net: mdio: validate parameter addr in mdiobus_get_phy()
HID: check empty report_list in hid_validate_values()
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
net: mlx5: eliminate anonymous module_init & module_exit
dmaengine: Fix double increment of client_count in dma_chan_get()
HID: betop: check shape of output reports
w1: fix deadloop in __w1_remove_master_device()
w1: fix WARNING after calling w1_process()
comedi: adv_pci1760: Fix PWM instruction handling
fs: reiserfs: remove useless new_opts in reiserfs_remount
Bluetooth: hci_sync: cancel cmd_timer if hci_open failed
scsi: hpsa: Fix allocation size for scsi_host_alloc()
module: Don't wait for GOING modules
tracing: Make sure trace_printk() can output as soon as it can be used
ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
EDAC/device: Respect any driver-supplied workqueue polling value
netlink: annotate data races around dst_portid and dst_group
netlink: annotate data races around sk_state
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
netrom: Fix use-after-free of a listening socket.
sctp: fail if no bound addresses can be used for a given scope
net: ravb: Fix possible hang if RIS2_QFF1 happen
net/tg3: resolve deadlock in tg3_reset_task() during EEH
Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
wifi: brcmfmac: fix up incorrect 4.14.y backport for brcmf_fw_map_chip_to_name()
xen: Fix up build warning with xen_init_time_ops() reference
drm/radeon/dp: make radeon_dp_get_dp_link_config static
scsi: qla2xxx: don't break the bsg-lib abstractions
x86/asm: Fix an assembler warning with current binutils
x86/entry/64: Add instruction suffix to SYSRET
sysctl: add a new register_sysctl_init() interface
panic: unset panic_on_warn inside panic()
exit: Add and use make_task_dead.
objtool: Add a missing comma to avoid string concatenation
hexagon: Fix function name in die()
h8300: Fix build errors from do_exit() to make_task_dead() transition
ia64: make IA64_MCA_RECOVERY bool instead of tristate
exit: Put an upper limit on how often we can oops
exit: Expose "oops_count" to sysfs
exit: Allow oops_limit to be disabled
panic: Consolidate open-coded panic_on_warn checks
panic: Introduce warn_limit
panic: Expose "warn_count" to sysfs
docs: Fix path paste-o for /sys/kernel/warn_count
exit: Use READ_ONCE() for all oops/warn limit reads
mm: kvmalloc does not fallback to vmalloc for incompatible gfp flags
ipv6: ensure sane device mtu in tunnels
usb: host: xhci-plat: add wakeup entry at sysfs
Linux 4.14.305

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I9dbf32875f32fdd3cc1f5383fb6524471463da98

Linux 4.14.305

Link: https://lore.kernel.org/r/20230203101012.959398849@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20230204143556.057468358@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add wakeup entry at sysfs

commit 4bb4fc0dbfa23acab9b762949b91ffd52106fe4b upstream.

With this change, there will be a wakeup entry at /sys/../power/wakeup,
and the user could use this entry to choose whether enable xhci wakeup
features (wake up system from suspend) or not.

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-6-mathias.nyman@linux.intel.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: ensure sane device mtu in tunnels

commit d89d7ff01235f218dad37de84457717f699dee79 upstream.

Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)

Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a451
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).

This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()

Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.

[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ta: Backport patch for stable kernels < 5.10.y. Fix conflict in
net/ipv6/ip6_tunnel.c, mtu initialized with:
mtu = rt->dst.dev->mtu - t_hlen;]
Cc: <stable@vger.kernel.org> # 4.14.y, 4.19.y, 5.4.y
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kvmalloc does not fallback to vmalloc for incompatible gfp flags

commit ce91f6ee5b3bbbad8caff61b1c46d845c8db19bf upstream.

kvmalloc warned about incompatible gfp_mask to catch abusers (mostly
GFP_NOFS) with an intention that this will motivate authors of the code
to fix those.  Linus argues that this just motivates people to do even
more hacks like

if (gfp == GFP_KERNEL)
kvmalloc
else
kmalloc

I haven't seen this happening much (Linus pointed to bucket_lock special
cases an atomic allocation but my git foo hasn't found much more) but it
is true that we can grow those in future.  Therefore Linus suggested to
simply not fallback to vmalloc for incompatible gfp flags and rather
stick with the kmalloc path.

Link: http://lkml.kernel.org/r/20180601115329.27807-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Use READ_ONCE() for all oops/warn limit reads

commit 7535b832c6399b5ebfc5b53af5c51dd915ee2538 upstream.

Use a temporary variable to take full advantage of READ_ONCE() behavior.
Without this, the report (and even the test) might be out of sync with
the initial test.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Y5x7GXeluFmZ8E0E@hirez.programming.kicks-ass.net
Fixes: 9fc9e278a5c0 ("panic: Introduce warn_limit")
Fixes: d4ccd54d28d3 ("exit: Put an upper limit on how often we can oops")
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: Fix path paste-o for /sys/kernel/warn_count

commit 00dd027f721e0458418f7750d8a5a664ed3e5994 upstream.

Running "make htmldocs" shows that "/sys/kernel/oops_count" was
duplicated. This should have been "warn_count":

  Warning: /sys/kernel/oops_count is defined 2 times:
  ./Documentation/ABI/testing/sysfs-kernel-warn_count:0
  ./Documentation/ABI/testing/sysfs-kernel-oops_count:0

Fix the typo.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-doc/202212110529.A3Qav8aR-lkp@intel.com
Fixes: 8b05aa263361 ("panic: Expose "warn_count" to sysfs")
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Expose "warn_count" to sysfs

commit 8b05aa26336113c4cea25f1c333ee8cd4fc212a6 upstream.

Since Warn count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/warn_count to expose it to userspace.

Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-6-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Introduce warn_limit

commit 9fc9e278a5c0b708eeffaf47d6eb0c82aa74ed78 upstream.

Like oops_limit, add warn_limit for limiting the number of warnings when
panic_on_warn is not set.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-5-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: Consolidate open-coded panic_on_warn checks

commit 79cc1ba7badf9e7a12af99695a557e9ce27ee967 upstream.

Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll
their own warnings, and each check "panic_on_warn". Consolidate this
into a single function so that future instrumentation can be added in
a single location.

Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Allow oops_limit to be disabled

commit de92f65719cd672f4b48397540b9f9eff67eca40 upstream.

In preparation for keeping oops_limit logic in sync with warn_limit,
have oops_limit == 0 disable checking the Oops counter.

Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Expose "oops_count" to sysfs

commit 9db89b41117024f80b38b15954017fb293133364 upstream.

Since Oops count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/oops_count to expose it to userspace.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Put an upper limit on how often we can oops

commit d4ccd54d28d3c8598e2354acc13e28c060961dbb upstream.

Many Linux systems are configured to not panic on oops; but allowing an
attacker to oops the system **really** often can make even bugs that look
completely unexploitable exploitable (like NULL dereferences and such) if
each crash elevates a refcount by one or a lock is taken in read mode, and
this causes a counter to eventually overflow.

The most interesting counters for this are 32 bits wide (like open-coded
refcounts that don't use refcount_t). (The ldsem reader count on 32-bit
platforms is just 16 bits, but probably nobody cares about 32-bit platforms
that much nowadays.)

So let's panic the system if the kernel is constantly oopsing.

The speed of oopsing 2^32 times probably depends on several factors, like
how long the stack trace is and which unwinder you're using; an empirically
important one is whether your console is showing a graphical environment or
a text console that oopses will be printed to.
In a quick single-threaded benchmark, it looks like oopsing in a vfork()
child with a very short stack trace only takes ~510 microseconds per run
when a graphical console is active; but switching to a text console that
oopses are printed to slows it down around 87x, to ~45 milliseconds per
run.
(Adding more threads makes this faster, but the actual oops printing
happens under &die_lock on x86, so you can maybe speed this up by a factor
of around 2 and then any further improvement gets eaten up by lock
contention.)

It looks like it would take around 8-12 days to overflow a 32-bit counter
with repeated oopsing on a multi-core X86 system running a graphical
environment; both me (in an X86 VM) and Seth (with a distro kernel on
normal hardware in a standard configuration) got numbers in that ballpark.

12 days aren't *that* short on a desktop system, and you'd likely need much
longer on a typical server system (assuming that people don't run graphical
desktop environments on their servers), and this is a *very* noisy and
violent approach to exploiting the kernel; and it also seems to take orders
of magnitude longer on some machines, probably because stuff like EFI
pstore will slow it down a ton if that's active.

Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20221107201317.324457-1-jannh@google.com
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-2-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: make IA64_MCA_RECOVERY bool instead of tristate

commit dbecf9b8b8ce580f4e11afed9d61e8aa294cddd2 upstream.

In linux-next, IA64_MCA_RECOVERY uses the (new) function
make_task_dead(), which is not exported for use by modules.  Instead of
exporting it for one user, convert IA64_MCA_RECOVERY to be a bool
Kconfig symbol.

In a config file from "kernel test robot <lkp@intel.com>" for a
different problem, this linker error was exposed when
CONFIG_IA64_MCA_RECOVERY=m.

Fixes this build error:

  ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined!

Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org
Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

h8300: Fix build errors from do_exit() to make_task_dead() transition

commit ab4ababdf77ccc56c7301c751dff49c79709c51c upstream.

When building ARCH=h8300 defconfig:

arch/h8300/kernel/traps.c: In function 'die':
arch/h8300/kernel/traps.c:109:2: error: implicit declaration of function
'make_dead_task' [-Werror=implicit-function-declaration]
  109 |  make_dead_task(SIGSEGV);
      |  ^~~~~~~~~~~~~~

arch/h8300/mm/fault.c: In function 'do_page_fault':
arch/h8300/mm/fault.c:54:2: error: implicit declaration of function
'make_dead_task' [-Werror=implicit-function-declaration]
   54 |  make_dead_task(SIGKILL);
      |  ^~~~~~~~~~~~~~

The function's name is make_task_dead(), change it so there is no more
build error.

Additionally, include linux/sched/task.h in arch/h8300/kernel/traps.c
to avoid the same error because do_exit()'s declaration is in kernel.h
but make_task_dead()'s is in task.h, which is not included in traps.c.

Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/20211227184851.2297759-3-nathan@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hexagon: Fix function name in die()

commit 4f0712ccec09c071e221242a2db9a6779a55a949 upstream.

When building ARCH=hexagon defconfig:

arch/hexagon/kernel/traps.c:217:2: error: implicit declaration of
function 'make_dead_task' [-Werror,-Wimplicit-function-declaration]
        make_dead_task(err);
        ^

The function's name is make_task_dead(), change it so there is no more
build error.

Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/20211227184851.2297759-2-nathan@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Add a missing comma to avoid string concatenation

commit 1fb466dff904e4a72282af336f2c355f011eec61 upstream.

Recently the kbuild robot reported two new errors:

>> lib/kunit/kunit-example-test.o: warning: objtool: .text.unlikely: unexpected end of section
>> arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_opcodes()

I don't know why they did not occur in my test setup but after digging
it I realized I had accidentally dropped a comma in
tools/objtool/check.c when I renamed rewind_stack_do_exit to
rewind_stack_and_make_dead.

Add that comma back to fix objtool errors.

Link: https://lkml.kernel.org/r/202112140949.Uq5sFKR1-lkp@intel.com
Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exit: Add and use make_task_dead.

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

panic: unset panic_on_warn inside panic()

commit 1a2383e8b84c0451fd9b1eec3b9aab16f30b597c upstream.

In the current code, the following three places need to unset
panic_on_warn before calling panic() to avoid recursive panics:

kernel/kcsan/report.c: print_report()
kernel/sched/core.c: __schedule_bug()
mm/kfence/report.c: kfence_report_error()

In order to avoid copy-pasting "panic_on_warn = 0" all over the places,
it is better to move it inside panic() and then remove it from the other
places.

Link: https://lkml.kernel.org/r/1644324666-15947-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysctl: add a new register_sysctl_init() interface

commit 3ddd9a808cee7284931312f2f3e854c9617f44b2 upstream.

Patch series "sysctl: first set of kernel/sysctl cleanups", v2.

Finally had time to respin the series of the work we had started last
year on cleaning up the kernel/sysct.c kitchen sink.  People keeps
stuffing their sysctls in that file and this creates a maintenance
burden.  So this effort is aimed at placing sysctls where they actually
belong.

I'm going to split patches up into series as there is quite a bit of
work.

This first set adds register_sysctl_init() for uses of registerting a
sysctl on the init path, adds const where missing to a few places,
generalizes common values so to be more easy to share, and starts the
move of a few kernel/sysctl.c out where they belong.

The majority of rework on v2 in this first patch set is 0-day fixes.
Eric Biederman's feedback is later addressed in subsequent patch sets.

I'll only post the first two patch sets for now.  We can address the
rest once the first two patch sets get completely reviewed / Acked.

This patch (of 9):

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

Today though folks heavily rely on tables on kernel/sysctl.c so they can
easily just extend this table with their needed sysctls.  In order to
help users move their sysctls out we need to provide a helper which can
be used during code initialization.

We special-case the initialization use of register_sysctl() since it
*is* safe to fail, given all that sysctls do is provide a dynamic
interface to query or modify at runtime an existing variable.  So the
use case of register_sysctl() on init should *not* stop if the sysctls
don't end up getting registered.  It would be counter productive to stop
boot if a simple sysctl registration failed.

Provide a helper for init then, and document the recommended init levels
to use for callers of this routine.  We will later use this in
subsequent patches to start slimming down kernel/sysctl.c tables and
moving sysctl registration to the code which actually needs these
sysctls.

[mcgrof@kernel.org: major commit log and documentation rephrasing also moved to fs/proc/proc_sysctl.c                  ]

Link: https://lkml.kernel.org/r/20211123202347.818157-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211123202347.818157-2-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Add instruction suffix to SYSRET

commit b2b1d94cdfd4e906d3936dab2850096a4a0c2017 upstream.

ignore_sysret() contains an unsuffixed SYSRET instruction. gas correctly
interprets this as SYSRETL, but leaving it up to gas to guess when there
is no register operand that implies a size is bad practice, and upstream
gas is likely to warn about this in the future. Use SYSRETL explicitly.
This does not change the assembled output.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/038a7c35-062b-a285-c6d2-653b56585844@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Fix an assembler warning with current binutils

commit 55d235361fccef573990dfa5724ab453866e7816 upstream.

Fix a warning: "found `movsd'; assuming `movsl' was meant"

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: don't break the bsg-lib abstractions

commit 05231a3bb7981b01f6933c0a847fcaac25622bfd upstream.

Always use bsg_job->reply instead of scsi_req(bsg_job->req)->sense), as
they always point to the same memory.

Never set scsi_req(bsg_job->req)->result and we'll set that value
through bsg_job_done.

[mkp: applied by hand, fixed whitespace]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Tested-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dp: make radeon_dp_get_dp_link_config static

commit d3f04c98ead2b89887e1e3c09b26e4917bacdd9e upstream.

It's not used outside this file any longer.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Fix up build warning with xen_init_time_ops() reference

Somehow the xen_init_time_ops() reference got out of sync in the 4.14.y
tree (or it never was in sync), and now there's a build warning.  Fix
that up by making xen_init_time_ops() be __init, not __ref.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: fix up incorrect 4.14.y backport for brcmf_fw_map_chip_to_name()

In commit bc45aa1911bf699b9905f12414e3c1879d6b784f which is commit
81d17f6f3331f03c8eafdacea68ab773426c1e3c upstream, the return value of the
error condition needs to be reworked to return a real error and not NULL.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Dokyung Song <dokyungs@yonsei.ac.kr>
Cc: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Cc: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/Y8gccXXyE30sbPSg@dev-arch.thelio-3990X
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

commit 5fa55950729d0762a787451dc52862c3f850f859 upstream.

Baoquan reported that after triggering a crash the subsequent crash-kernel
fails to boot about half of the time. It triggers a NULL pointer
dereference in the periodic tick code.

This happens because the legacy timer interrupt (IRQ0) is resent in
software which happens in soft interrupt (tasklet) context. In this context
get_irq_regs() returns NULL which leads to the NULL pointer dereference.

The reason for the resend is a spurious APIC interrupt on the IRQ0 vector
which is captured and leads to a resend when the legacy timer interrupt is
enabled. This is wrong because the legacy PIC interrupts are level
triggered and therefore should never be resent in software, but nothing
ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not
know about their trigger type.

Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

Fixes: a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/87mt6rjrra.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream.

This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because
it causes loss of keyboard on HP 15-da1xxx.

Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tg3: resolve deadlock in tg3_reset_task() during EEH

[ Upstream commit 6c4ca03bd890566d873e3593b32d034bf2f5a087 ]

During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:

crash> foreach UN bt
...
PID: 159    TASK: c0000000067c6000  CPU: 8   COMMAND: "eehd"
...
 #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
 #7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...

PID: 290    TASK: c000000036e5f800  CPU: 6   COMMAND: "kworker/6:1"
...
 #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c00000003721fc60] process_one_work at c00000000019e5c4
...

PID: 296    TASK: c000000037a65800  CPU: 21  COMMAND: "kworker/21:1"
...
 #4 [c000000037247bc0] rtnl_lock at c000000000c940d8
 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c000000037247c60] process_one_work at c00000000019e5c4
...

PID: 655    TASK: c000000036f49000  CPU: 16  COMMAND: "kworker/16:2"
...:1

 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
 #6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...

Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks.  If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.

Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:

crash> foreach UN bt
PID: 159    TASK: c0000000067d2000  CPU: 9   COMMAND: "eehd"
...
 #4 [c000000006867a60] rtnl_lock at c000000000c940d8
 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
 #6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363    TASK: c000000037564000  CPU: 6   COMMAND: "kworker/6:1"
...
 #3 [c000000036c1bb70] msleep at c000000000259e6c
 #4 [c000000036c1bba0] napi_disable at c000000000c6b848
 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
 #6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...

This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.

Fixes: db84bf43ef23 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ravb: Fix possible hang if RIS2_QFF1 happen

[ Upstream commit f3c07758c9007a6bfff5290d9e19d3c41930c897 ]

Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.

Note that this also fix a minor coding style (a comment indentation)
around the fixed code.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fail if no bound addresses can be used for a given scope

[ Upstream commit 458e279f861d3f61796894cd158b780765a1569f ]

Currently, if you bind the socket to something like:
        servaddr.sin6_family = AF_INET6;
        servaddr.sin6_port = htons(0);
        servaddr.sin6_scope_id = 0;
        inet_pton(AF_INET6, "::1", &servaddr.sin6_addr);

And then request a connect to:
        connaddr.sin6_family = AF_INET6;
        connaddr.sin6_port = htons(20000);
        connaddr.sin6_scope_id = if_nametoindex("lo");
        inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr);

What the stack does is:
 - bind the socket
 - create a new asoc
 - to handle the connect
   - copy the addresses that can be used for the given scope
   - try to connect

But the copy returns 0 addresses, and the effect is that it ends up
trying to connect as if the socket wasn't bound, which is not the
desired behavior. This unexpected behavior also allows KASLR leaks
through SCTP diag interface.

The fix here then is, if when trying to copy the addresses that can
be used for the scope used in connect() it returns 0 addresses, bail
out. This is what TCP does with a similar reproducer.

Reported-by: Pietro Borrello <borrello@diag.uniroma1.it>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: Fix use-after-free of a listening socket.

[ Upstream commit 409db27e3a2eb5e8ef7226ca33be33361b3ed1c9 ]

syzbot reported a use-after-free in do_accept(), precisely nr_accept()
as sk_prot_alloc() allocated the memory and sock_put() frees it. [0]

The issue could happen if the heartbeat timer is fired and
nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket
has SOCK_DESTROY or a listening socket has SOCK_DEAD.

In this case, the first condition cannot be true.  SOCK_DESTROY is
flagged in nr_release() only when the file descriptor is close()d,
but accept() is being called for the listening socket, so the second
condition must be true.

Usually, the AF_NETROM listener neither starts timers nor sets
SOCK_DEAD.  However, the condition is met if connect() fails before
listen().  connect() starts the t1 timer and heartbeat timer, and
t1timer calls nr_disconnect() when timeout happens.  Then, SOCK_DEAD
is set, and if we call listen(), the heartbeat timer calls
nr_destroy_socket().

  nr_connect
    nr_establish_data_link(sk)
      nr_start_t1timer(sk)
    nr_start_heartbeat(sk)
                                    nr_t1timer_expiry
                                      nr_disconnect(sk, ETIMEDOUT)
                                        nr_sk(sk)->state = NR_STATE_0
                                        sk->sk_state = TCP_CLOSE
                                        sock_set_flag(sk, SOCK_DEAD)
nr_listen
  if (sk->sk_state != TCP_LISTEN)
    sk->sk_state = TCP_LISTEN
                                    nr_heartbeat_expiry
                                      switch (nr->state)
                                      case NR_STATE_0
                                        if (sk->sk_state == TCP_LISTEN &&
                                            sock_flag(sk, SOCK_DEAD))
                                          nr_destroy_socket(sk)

This path seems expected, and nr_destroy_socket() is called to clean
up resources.  Initially, there was sock_hold() before nr_destroy_socket()
so that the socket would not be freed, but the commit 517a16b1a88b
("netrom: Decrease sock refcount when sock timers expire") accidentally
removed it.

To fix use-after-free, let's add sock_hold().

[0]:
BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848
Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315

CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511728c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x15e/0x461 mm/kasan/report.c:417
 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
 do_accept+0x483/0x510 net/socket.c:1848
 __sys_accept4_file net/socket.c:1897 [inline]
 __sys_accept4+0x9a/0x120 net/socket.c:1927
 __do_sys_accept net/socket.c:1944 [inline]
 __se_sys_accept net/socket.c:1941 [inline]
 __x64_sys_accept+0x75/0xb0 net/socket.c:1941
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa436a8c0c9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000
 </TASK>

Allocated by task 5294:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 ____kasan_kmalloc mm/kasan/common.c:371 [inline]
 ____kasan_kmalloc mm/kasan/common.c:330 [inline]
 __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __do_kmalloc_node mm/slab_common.c:968 [inline]
 __kmalloc+0x5a/0xd0 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 sk_prot_alloc+0x140/0x290 net/core/sock.c:2038
 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091
 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433
 __sock_create+0x359/0x790 net/socket.c:1515
 sock_create net/socket.c:1566 [inline]
 __sys_socket_create net/socket.c:1603 [inline]
 __sys_socket_create net/socket.c:1588 [inline]
 __sys_socket+0x133/0x250 net/socket.c:1636
 __do_sys_socket net/socket.c:1649 [inline]
 __se_sys_socket net/socket.c:1647 [inline]
 __x64_sys_socket+0x73/0xb0 net/socket.c:1647
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 14:
 kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200
 kasan_slab_free include/linux/kasan.h:177 [inline]
 __cache_free mm/slab.c:3394 [inline]
 __do_kmem_cache_free mm/slab.c:3580 [inline]
 __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587
 sk_prot_free net/core/sock.c:2074 [inline]
 __sk_destruct+0x5df/0x750 net/core/sock.c:2166
 sk_destruct net/core/sock.c:2181 [inline]
 __sk_free+0x175/0x460 net/core/sock.c:2192
 sk_free+0x7c/0xa0 net/core/sock.c:2203
 sock_put include/net/sock.h:1991 [inline]
 nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148
 call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700
 expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751
 __run_timers kernel/time/timer.c:2022 [inline]
 __run_timers kernel/time/timer.c:1995 [inline]
 run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
 __do_softirq+0x1fb/0xadc kernel/softirq.c:571

Fixes: 517a16b1a88b ("netrom: Decrease sock refcount when sock timers expire")
Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE

[ Upstream commit a9993591fa94246b16b444eea55d84c54608282a ]

RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk
MUST be accepted if the vtag of the packet matches its own tag and the
T bit is not set OR if it is set to its peer's vtag and the T bit is set
in chunk flags. Otherwise the packet MUST be silently dropped.

Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above
description.

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: annotate data races around sk_state

[ Upstream commit 9b663b5cbb15b494ef132a3c937641c90646eb73 ]

netlink_getsockbyportid() reads sk_state while a concurrent
netlink_connect() can change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: annotate data races around dst_portid and dst_group

[ Upstream commit 004db64d185a5f23dfb891d7701e23713b2420ee ]

netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid()
can read nlk->dst_portid and nlk->dst_group while another
thread is changing them.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/device: Respect any driver-supplied workqueue polling value

commit cec669ff716cc83505c77b242aecf6f7baad869d upstream.

The EDAC drivers may optionally pass the poll_msec value. Use that value
if available, else fall back to 1000ms.

  [ bp: Touchups. ]

Fixes: e27e3dac6517 ("drivers/edac: add edac_device class")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Cc: <stable@vger.kernel.org> # 4.9
Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment

commit a4e03921c1bb118e6718e0a3b0322a2c13ed172b upstream.

zero_page is a void* pointer but memblock_alloc() returns phys_addr_t type
so this generates a warning while using clang and with -Wint-error enabled
that becomes and error. So let's cast the return of memblock_alloc() to
(void *).

Cc: <stable@vger.kernel.org> # 4.14.x +
Fixes: 340a982825f7 ("ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation")
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Make sure trace_printk() can output as soon as it can be used

commit 3bb06eb6e9acf7c4a3e1b5bc87aed398ff8e2253 upstream.

Currently trace_printk() can be used as soon as early_trace_init() is
called from start_kernel(). But if a crash happens, and
"ftrace_dump_on_oops" is set on the kernel command line, all you get will
be:

  [    0.456075]   <idle>-0         0dN.2. 347519us : Unknown type 6
  [    0.456075]   <idle>-0         0dN.2. 353141us : Unknown type 6
  [    0.456075]   <idle>-0         0dN.2. 358684us : Unknown type 6

This is because the trace_printk() event (type 6) hasn't been registered
yet. That gets done via an early_initcall(), which may be early, but not
early enough.

Instead of registering the trace_printk() event (and other ftrace events,
which are not trace events) via an early_initcall(), have them registered at
the same time that trace_printk() can be used. This way, if there is a
crash before early_initcall(), then the trace_printk()s will actually be
useful.

Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e725c731e3bb1 ("tracing: Split tracing initialization into two for early initialization")
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: Don't wait for GOING modules

commit 0254127ab977e70798707a7a2b757c9f3c971210 upstream.

During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3dee51a
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee51a (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/

Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hpsa: Fix allocation size for scsi_host_alloc()

[ Upstream commit bbbd25499100c810ceaf5193c3cfcab9f7402a33 ]

The 'h' is a pointer to struct ctlr_info, so it's just 4 or 8 bytes, while
the structure itself is much bigger.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: edd163687ea5 ("hpsa: add driver for HP Smart Array controllers.")
Link: https://lore.kernel.org/r/20230118031255.GE15213@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: cancel cmd_timer if hci_open failed

commit 97dfaf073f5881c624856ef293be307b6166115c upstream.

If a command is already sent, we take care of freeing it, but we
also need to cancel the timeout as well.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: reiserfs: remove useless new_opts in reiserfs_remount

commit 81dedaf10c20959bdf5624f9783f408df26ba7a4 upstream.

Since the commit c3d98ea08291 ("VFS: Don't use save/replace_mount_options
if not using generic_show_options") eliminates replace_mount_options
in reiserfs_remount, but does not handle the allocated new_opts,
it will cause memory leak in the reiserfs_remount.

Because new_opts is useless in reiserfs_mount, so we fix this bug by
removing the useless new_opts in reiserfs_remount.

Fixes: c3d98ea08291 ("VFS: Don't use save/replace_mount_options if not using generic_show_options")
Link: https://lore.kernel.org/r/20211027143445.4156459-1-mudongliangabcd@gmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: adv_pci1760: Fix PWM instruction handling

commit 2efb6edd52dc50273f5e68ad863dd1b1fb2f2d1c upstream.

(Actually, this is fixing the "Read the Current Status" command sent to
the device's outgoing mailbox, but it is only currently used for the PWM
instructions.)

The PCI-1760 is operated mostly by sending commands to a set of Outgoing
Mailbox registers, waiting for the command to complete, and reading the
result from the Incoming Mailbox registers.  One of these commands is
the "Read the Current Status" command.  The number of this command is
0x07 (see the User's Manual for the PCI-1760 at
<https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>.
The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand
to this command number 0x07, but unfortunately it currently expands to
0x03.  (Command number 0x03 is not defined in the User's Manual.)
Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it.

This is used by all the PWM subdevice related instructions handled by
`pci1760_pwm_insn_config()` which are probably all broken.  The effect
of sending the undefined command number 0x03 is not known.

Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: fix WARNING after calling w1_process()

[ Upstream commit 36225a7c72e9e3e1ce4001b6ce72849f5c9a2d3b ]

I got the following WARNING message while removing driver(ds2482):

------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G                 N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
 exit_signals+0x6c/0x550
 do_exit+0x2b4/0x17e0
 kthread_exit+0x52/0x60
 kthread+0x16d/0x1e0
 ret_from_fork+0x1f/0x30

The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning.

Fixes: 3c52e4e62789 ("W1: w1_process, block or sleep")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205101558.3599162-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: fix deadloop in __w1_remove_master_device()

[ Upstream commit 25d5648802f12ae486076ceca5d7ddf1fef792b2 ]

I got a deadloop report while doing device(ds2482) add/remove test:

  [  162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
  [  163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
  [  164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
  ...

__w1_remove_master_device() can't return, because the dev->refcnt is not zero.

w1_add_master_device() |
  w1_alloc_dev() |
    atomic_set(&dev->refcnt, 2) |
  kthread_run() |
|__w1_remove_master_device()
|  kthread_stop()
  // KTHREAD_SHOULD_STOP is set, |
  // threadfn(w1_process) won't be |
  // called. |
  kthread() |
|  // refcnt will never be 0, it's deadloop.
|  while (atomic_read(&dev->refcnt)) {...}

After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.

We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205080434.3149205-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>