git.stricted.de - GitHub/moto-9609/android_kernel_motorola

perf trace/scripting: Add 'record' and 'report' options

Allow scripts to be recorded/executed by simply specifying the
script root name (the script name minus extension) along with
'record' or 'report' to 'perf trace'.

The script names shown by 'perf trace -l' can be directly used
to run the command-line contained within the corresponding
'-record' and '-report' versions of scripts in the scripts/*/bin
directories.

For example, to record the trace data needed to run the
wakeup-latency.pl script, the user can easily find the name of
the corresponding script from the script list and invoke it
using 'perf trace record', without having to remember the
details of how to do the same thing using the lower-level perf
trace command-line options:

root@tropicana:~# perf trace -l
List of available trace scripts:
  workqueue-stats                      workqueue stats (ins/exe/create/destroy)
  wakeup-latency                       system-wide min/max/avg wakeup latency
  rw-by-file <comm>                    r/w activity for a program, by file
  check-perf-trace                     useless but exhaustive test script
  rw-by-pid                            system-wide r/w activity

root@tropicana:~# perf trace record wakeup-latency
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.296 MB perf.data (~12931
samples) ]

To run the wakeup-latency.pl script using the captured data,
change 'record' to 'report' in the command-line:

root@tropicana:~# perf trace report wakeup-latency

wakeup_latency stats:

total_wakeups: 65
avg_wakeup_latency (ns): 22417
min_wakeup_latency (ns): 3470
max_wakeup_latency (ns): 223311

perf trace Perl script stopped

If the script takes options, thay can be simply added to the end
of the 'report' invocation:

root@tropicana:~# perf trace record rw-by-file
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.782 MB perf.data (~34171
samples) ]

root@tropicana:~# perf trace report rw-by-file perf

file read counts for perf:

    fd     # reads  bytes_requested
------  ----------  -----------
   122        1934     1980416
   120           1          32

file write counts for perf:

    fd    # writes  bytes_written
------  ----------  -----------
     3        4006      280568

perf trace Perl script stopped

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf trace/scripting: List available scripts

Lists the available perf trace scripts, one per line e.g.:

root@tropicana:~# perf trace -l
List of available trace scripts:
  workqueue-stats                      workqueue stats (ins/exe/create/destroy)
  wakeup-latency                       system-wide min/max/avg wakeup latency
  rw-by-file <comm>                    r/w activity for a program, by file
  check-perf-trace                     useless but exhaustive test script
  rw-by-pid                            system-wide r/w activity

To be consistent with the other listing options in perf, the
current latency trace option was changed to '-L', and '-l' is
now used to access the script listing as:

To create the list, it searches each scripts/*/bin directory for
files ending with "-report" and reads information found in
certain comment lines contained in those shell scripts:

  - if the comment line starts with "description:", the rest of the
    line is used as a 'half-line' description.  To keep each line in
    the list to a single line, the description should be limited to 40
    characters (the rest of the line contains the script name and
    args)

  - if the comment line starts with "args:", the rest of the line
    names the args the script supports.  Required args should be
    surrounded by <> brackets, optional args by [] brackets.

The current scripts in scripts/perl/bin have also been updated
with description: and args: comments.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf trace/scripting: Check return val of perl_run()

The return value from perl_run() is currently ignored, but it
should be checked and used to exit perf if there are problems
loading the script.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf trace/scripting: Don't install unneeded files

README and Makefile.PL don't need to be installed for Perl
run-time support.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf trace/scripting: Add support for script args

One oversight of the original scripting_ops patch was a lack of
support for passing args to handler scripts. This adds
argc/argv to the start_script() scripting_op, and changes the
rw-by-file script to take 'comm' arg rather than the 'perf'
value currently hard-coded. It also takes the opportunity to do
some related minor cleanup.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Make symbol_conf static

perf top, report and annotate all define their own symbol_conf,
it should be static.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260843322-6602-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf diff: Introduce tool to show performance difference

I guess it is enough to show some examples:

[root@doppio linux-2.6-tip]# rm -f perf.data*
[root@doppio linux-2.6-tip]# ls -la perf.data*
ls: cannot access perf.data*: No such file or directory
[root@doppio linux-2.6-tip]# perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ]
[root@doppio linux-2.6-tip]# ls -la perf.data*
-rw------- 1 root root 74440 2009-12-14 20:03 perf.data
[root@doppio linux-2.6-tip]# perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2692 samples) ]
[root@doppio linux-2.6-tip]# ls -la perf.data*
-rw------- 1 root root 74280 2009-12-14 20:03 perf.data
-rw------- 1 root root 74440 2009-12-14 20:03 perf.data.old
[root@doppio linux-2.6-tip]# perf diff | head -5
   1        -34994580     /lib64/libc-2.10.1.so   _IO_vfprintf_internal
   2        -15307806         [kernel.kallsyms]   __kmalloc
   3    +1   +3665941     /lib64/libc-2.10.1.so   __GI_memmove
   4    +4  +23508995     /lib64/libc-2.10.1.so   _int_malloc
   5    +7  +38538813         [kernel.kallsyms]   __d_lookup
[root@doppio linux-2.6-tip]# perf diff -p | head -5
   1        +1.00%     /lib64/libc-2.10.1.so   _IO_vfprintf_internal
   2                       [kernel.kallsyms]   __kmalloc
   3    +1             /lib64/libc-2.10.1.so   __GI_memmove
   4    +4             /lib64/libc-2.10.1.so   _int_malloc
   5    +7  -1.00%         [kernel.kallsyms]   __d_lookup
[root@doppio linux-2.6-tip]# perf diff -v | head -5
   1        361449551 326454971 -34994580     /lib64/libc-2.10.1.so   _IO_vfprintf_internal
   2        151009241 135701435 -15307806         [kernel.kallsyms]   __kmalloc
   3    +1  101805328 105471269  +3665941     /lib64/libc-2.10.1.so   __GI_memmove
   4    +4   78041440 101550435 +23508995     /lib64/libc-2.10.1.so   _int_malloc
   5    +7   59536172  98074985 +38538813         [kernel.kallsyms]   __d_lookup
[root@doppio linux-2.6-tip]# perf diff -vp | head -5
   1        9.00% 8.00% +1.00%     /lib64/libc-2.10.1.so   _IO_vfprintf_internal
   2        3.00% 3.00%                [kernel.kallsyms]   __kmalloc
   3    +1  2.00% 2.00%            /lib64/libc-2.10.1.so   __GI_memmove
   4    +4  2.00% 2.00%            /lib64/libc-2.10.1.so   _int_malloc
   5    +7  1.00% 2.00% -1.00%         [kernel.kallsyms]   __d_lookup
[root@doppio linux-2.6-tip]#

This should be enough for diffs where the system is non
volatile, i.e. when one doesn't updates binaries.

For volatile environments, stay tuned for the next perf tool
feature: a buildid cache populated by 'perf record', managed by
'perf buildid-cache' a-la ccache, and used by all the report
tools.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <1260828571-3613-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf record: Rename perf.data to perf.data.old if --force/-f is used

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260828571-3613-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf util: Remove setup_sorting dups

And it is also needed by 'perf diff'.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260828571-3613-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Event statistics also are per session

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260810361-22828-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Adopt the sample_type variable

All tools had copies, and perf diff would have to specify a
sample_type_check method just for copying it.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260807780-19377-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Adopt resolve_callchain

This is really a generic library routine, so declutter
builtin-report.c a bit by moving it to the library.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260807780-19377-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Move the hist_entries rb tree to perf_session

As we'll need to sort multiple times for multiple perf sessions,
so that we can then do a diff.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260803439-16783-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: No need for three rb_trees for sorting hist entries

All hist entries are in only one of them, so use just one and a
temporary rb_root while sorting/collapsing.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260797831-11220-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Move kmaps to perf_session

There is still some more work to do to disentangle map creation
from DSO loading, but this happens only for the kernel, and for
the early adopters of perf diff, where this disentanglement
matters most, we'll be testing different kernels, so no problem
here.

Further clarification: right now we create the kernel maps for
the various modules and discontiguous kernel text maps when
loading the DSO, we should do it as a two step process, first
creating the maps, for multiple mappings with the same DSO
store, then doing the dso load just once, for the first hit on
one of the maps sharing this DSO backing store.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Move the global threads list to perf_session

So that we can process two perf.data files.

We still need to add a O_MMAP mode for perf_session so that we
can do all the mmap stuff in it.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Reduce the number of parms to perf_session__process_events

By having the cwd/cwdlen in the perf_session struct and
full_paths in perf_event_ops.

Now its just a matter of passing the ops.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Register the idle thread in perf_session__process_events

No need for all tools to register it and then immediately call
perf_session__process_events.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Ditch register_perf_file_handler

Pass the event_ops to perf_session__process_events instead.

Also move the event_ops definition to session.h, starting to
move things around to their right place, trimming the many
unneeded headers we have.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf session: Pass the perf_session to the event handling operations

They will need it to get the right threads list, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf sched: Fix build failure on sparc

Here, tvec->tv_usec is "unsigned int" not "unsigned long".

Since the type is different on every platform, it's probably
best to just use long printf formats and cast.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091213.235622.53363059.davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf bench: Add "all" pseudo subsystem and "all" pseudo suite

This patch adds a new "all" pseudo subsystem and an "all" pseudo
suite. These are for testing all subsystem and its all suite, or
all suite of one subsystem.

(This patch also contains a few trivial comment fixes for
bench/* and output style fixes. I judged that there are no
necessity to make them into individual patch.)

Example of use:

| % ./perf bench sched all                      # Test all suites of sched subsystem
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
|      Total time: 0.414 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
|      Total time: 10.999 [sec]
|
|       10.999317 usecs/op
|           90914 ops/sec
|
| % ./perf bench all                            # Test all suites of all subsystems
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
|      Total time: 0.420 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
|      Total time: 11.741 [sec]
|
|       11.741346 usecs/op
|           85169 ops/sec
|
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ...
|
|      808.407437 MB/Sec

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Introduce perf_session class

That does all the initialization boilerplate, opening the file,
reading the header, checking if it is valid, etc.

And that will as well have the threads list, kmap (now) global
variable, etc, so that we can handle two (or more) perf.data files
describing sessions to compare.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260573842-19720-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Ditch dso->find_symbol

It is always wired to dso__find_symbol.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260564999-13371-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Allow lookups by symbol name too

Configurable via symbol_conf.sort_by_name, so that the cost of an
extra rb_node on all 'struct symbol' instances is not paid by tools
that only want to decode addresses.

How to use it:

symbol_conf.sort_by_name = true;
symbol_init(&symbol_conf);

struct map *map = map_groups__find_by_name(kmaps, MAP__VARIABLE, "[kernel.kallsyms]");

if (map == NULL) {
pr_err("couldn't find map!\n");
kernel_maps__fprintf(stdout);
} else {
struct symbol *sym = map__find_symbol_by_name(map, sym_filter, NULL);
if (sym == NULL)
pr_err("couldn't find symbol %s!\n", sym_filter);
else
pr_info("symbol %s: %#Lx-%#Lx \n", sym_filter, sym->start, sym->end);
}

Looking over the vmlinux/kallsyms is common enough that I'll add a
variable to the upcoming struct perf_session to avoid the need to
use map_groups__find_by_name to get the main vmlinux/kallsyms map.

The above example looks on the 'variable' symtab, but it is just
like that for the functions one.

Also the sort operation is done when we first use
map__find_symbol_by_name, in a lazy way.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260564622-12392-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Add missing "Variables" entry to map_type__name

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260552208-6824-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Add support for 'variable' symtabs

Example:

{
u64 addr = strtoull(sym_filter, NULL, 16);
struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr);

if (map == NULL)
pr_err("couldn't find map!\n");
else {
struct symbol *sym = map__find_symbol(map, addr, NULL);
if (sym == NULL)
pr_err("couldn't find addr!\n");
else
pr_info("addr %#Lx is in %s global var\n", addr, sym->name);
}
exit(0);
}

Added just after symbol__init() call in 'perf top', then:

{
        u64 addr = strtoull(sym_filter, NULL, 16);
        struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr);

        if (map == NULL)
                pr_err("couldn't find map!\n");
        else {
                struct symbol *sym = map__find_symbol(map, addr, NULL);
                if (sym == NULL)
                        pr_err("couldn't find addr!\n");
                else
                        pr_info("addr %#Lx is in %s global var\n", addr, sym->name);
        }
        exit(0);
}

[root@doppio linux-2.6-tip]# grep ' [dD] ' /proc/kallsyms | grep ' sched'
ffffffff817827d8 d sched_nr_latency
ffffffff81782ce0 d sched_domains_mutex
ffffffff8178c070 d schedstr.22423
ffffffff817909a0 d sched_register_mutex
ffffffff81823490 d sched_feat_names
ffffffff81823558 d scheduler_running
ffffffff818235b8 d sched_clock_running
ffffffff818235bc D sched_clock_stable
ffffffff81824f00 d sched_switch_trace
[root@doppio linux-2.6-tip]# perf top -s 0xffffffff817827d9
addr 0xffffffff817827d9 is in sched_nr_latency global var
[root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0
addr 0xffffffff81782ce0 is in sched_domains_mutex global var
[root@doppio linux-2.6-tip]#
[root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 --vmlinux OFF
The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff81782ce0 is in sched_domains_mutex global var
[root@doppio linux-2.6-tip]# perf top -s ffffffff818235bc --vmlinux OFF
The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff818235bc is in sched_clock_stable global var
[root@doppio linux-2.6-tip]#

So it works with both /proc/kallsyms and with ELF symtabs, either
the one on the vmlinux explicitely passed via --vmlinux or in one
in the vmlinux_path that matches the buildid for the running kernel
or the one found in the buildid header section in a perf.data file.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Introduce ELF counterparts to symbol_type__is_a

For selecting the right types of symbols in ELF symtabs.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Introduce symbol_type__is_a

For selecting the right types of symbols in /proc/kallsyms, will be
followed by elf_symbol_type__is_a, for the same purpose on ELF
symtabs.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: Rename kthreads to kmaps, using another abstraction for it

Using a struct thread instance just to hold the kernel space maps
(vmlinux + modules) is overkill and confuses people trying to
understand the perf symbols abstractions.

The kernel maps are really present in all threads, i.e. the kernel
is a library, not a separate thread.

So introduce the 'map_groups' abstraction and use it for the kernel
maps, now in the kmaps global variable.

It, in turn, will move, together with the threads list to the
perf_file abstraction, so that we can support multiple perf_file
instances, needed by perf diff.

Brainstormed-with: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Allow building for ARM

Add definitions of rmb() and cpu_relax() and include the ARM
unistd.h header. The __kuser_memory_barrier helper in the helper
page is used to provide the correct memory barrier depending on
the CPU type.

[ The rmb() will work on v6 and v7, segfault on v5. Dynamic
detection to add v5 support will be added later. ]

Signed-off-by: Jamie Iles <jamie.iles@picochip.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mikael Pettersson <mikpe@it.uu.se>
LKML-Reference: <1260534009-5394-1-git-send-email-jamie.iles@picochip.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value

While converting modify_user_hw_breakpoint() return value, we
forgot to handle the off-case. It's not returning a pointer
anymore.

This solves the build warning reported by Stephen Rothwell against
linux-next.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260529122-6260-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Prasad <prasad@linux.vnet.ibm.com>

perf tools: Allow cross compiling

For embedded platforms, we want to be able to build the perf
tools on a build machine to run on a different arch. This patch
allows $CROSS_COMPILE to set the cross compiler.

Additionally, if NO_LIBPERL is set, then don't use perl include
paths as they will be for the host arch.

Signed-off-by: Jamie Iles <jamie.iles@picochip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260523260-15694-2-git-send-email-jamie.iles@picochip.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE

For slab, if CONFIG_KMEMTRACE and CONFIG_DEBUG_SLAB are not set,
__do_kmalloc() will not track callers:

# ./perf record -f -a -R -e kmem:kmalloc
^C
# ./perf trace
...
          perf-2204  [000]   147.376774: kmalloc: call_site=c0529d2d ...
          perf-2204  [000]   147.400997: kmalloc: call_site=c0529d2d ...
          Xorg-1461  [001]   147.405413: kmalloc: call_site=0 ...
          Xorg-1461  [001]   147.405609: kmalloc: call_site=0 ...
       konsole-1776  [001]   147.405786: kmalloc: call_site=0 ...

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <4B21F8AE.6020804@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Define kmem_trace_alloc_{,node}_notrace() if CONFIG_TRACING is
enabled, otherwise perf-kmem will show wrong stats ifndef
CONFIG_KMEM_TRACE, because a kmalloc() memory allocation may
be traced by both trace_kmalloc() and trace_kmem_cache_alloc().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <4B21F89A.7000801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, perf events: Check if we have APIC enabled

Ralf Hildebrandt reported this boot warning:

| Running a vanilla 2.6.32 as Xen DomU, I'm getting:
|
| [    0.000999] CPU: Physical Processor ID: 0
| [    0.000999] CPU: Processor Core ID: 1
| [    0.000999] Performance Events: AMD PMU driver.
| [    0.000999] ------------[ cut here ]------------
| [    0.000999] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy

So we need to check if APIC functionality is available, and
not just in the P6 driver but elsewhere as well.

Reported-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091210165634.GF5086@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Fix variable initialization in other codepaths

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B20BAA6.7010609@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf kmem: Fix unused argument build warning

Fix:

builtin-kmem.c: In function 'parse_caller_opt':
builtin-kmem.c:690: error: unused parameter 'arg'
builtin-kmem.c: In function 'parse_alloc_opt':
builtin-kmem.c:697: error: unused parameter 'arg'

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A195.8030106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: perf_header__read_build_ids() offset'n'size should be u64

As off_t is a long, so breaking things on 32-bit land. Now
buildids work on 32-bit land.

[root@ana ~]# uname -a
Linux ana.ghostprotocols.net 2.6.31.6-162.fc12.i686 #1 SMP Fri
Dec 4 01:09:09 EST 2009 i686 i686 i386 GNU/Linux [root@ana ~]#
perf buildid-list | tail -5
136ee6792ba2ae57870ecd87369f4ae3194d5b27 /lib/libreadline.so.6.0
d202dcb1ad48d140065783657d37ae3f2d9ab83f /usr/bin/gdb
0a56c0c00dcc2e9e581ae9997f31957c9c4671df
/usr/lib/libdwarf.so.0.0
5f9e6ac95241cbb3227608e0ff2a2e0cbbe72439 /home/acme/bin/perf
925d19eccc2ddb1c9d74dd178a011426f1b124a8 /bin/sleep [root@ana ~]#

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260396578-19116-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf symbols: dsos__read_build_ids() should read both user and kernel buildids

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260396578-19116-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Align long options which have no short forms

Before:

$ ./perf kmem
...
    -l, --line <num>      show n lines
    --raw-ip              show raw ip instead of symbol

After:

$ ./perf kmem
...
    -l, --line <num>      show n lines
        --raw-ip          show raw ip instead of symbol

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A1A9.3040104@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf kmem: Show usage if no option is specified

As Ingo suggested, make "perf kmem" show help information.
"perf kmem stat [--caller] [--alloc] .." will show memory
statistics.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A195.8030106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

sched: Mark sched_clock() as notrace

The core ftrace code (trace_clock_local) calls sched_clock()
directly, so we don't want to recurisvely trigger the ftrace
code. Rather than update every sched_clock() definition, tag
the prototype for everyone as notrace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260407223-10900-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf sched: Add max delay time snapshot

When we have a maximum latency reported for a task, we need a
convenient way to find the matching location to the raw traces
or to perf sched map that shows where the task has been
eventually scheduled in. This gives a pointer to retrieve the
events that occured during this max latency.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260391208-6808-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Correct size given to memset

Memset should be given the size of the structure, not the size
of the pointer.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T *x;
expression E;
@@

memset(x, E, sizeof(
+ *
x))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <Pine.LNX.4.64.0912092026000.1870@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Fix perf_swevent_hrtimer() variable initialization

fix:

[<c0477471>] ? printk+0x1d/0x24
[<c01c98f9>] ? perf_prepare_sample+0x269/0x280
[<c0149231>] warn_slowpath_common+0x71/0xd0
[<c01c98f9>] ? perf_prepare_sample+0x269/0x280
[<c01492aa>] warn_slowpath_null+0x1a/0x20
[<c01c98f9>] perf_prepare_sample+0x269/0x280
[<c016e9f3>] ? cpu_clock+0x53/0x90
[<c01cc368>] __perf_event_overflow+0x2a8/0x300
[<c01ccc3b>] perf_event_overflow+0x1b/0x30
[<c01ccccf>] perf_swevent_hrtimer+0x7f/0x120

This is because 'data.raw' variable not initialize.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B208E93.1010801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf sched: Fix for getting task's execution time

In current code, task's execute time is got by reading
'/proc/<pid>/sched' file, it's wrong if the task is created
by pthread_create(), because every thread task has same pid.

This way also has two demerits:

1: 'perf sched replay' can't work if the kernel is not
compiled with the 'CONFIG_SCHED_DEBUG' option

2: perf tool should depend on proc file system

So, this patch uses PERF_COUNT_SW_TASK_CLOCK to get task's
execution time instead of reading /proc file.

Changelog v2 -> v3:
use PERF_COUNT_SW_TASK_CLOCK instead of rusage() as Ingo's
suggestion

Reported-by: Torok Edwin <edwintorok@gmail.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Xiao Guangrong <ericxiao.gr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F7322.80103@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tracing/kprobes: Fix field creation's bad error handling

When we define the common event fields in kprobe, we invert the error
handling and return immediately in case of success. Then we omit
to define specific kprobes fields (ip and nargs), and specific
kretprobes fields (func, ret_ip, nargs). And we only define them
when we fail to create common fields.

The most visible consequence is that we can't create filter for
k(ret)probes specific fields.

This patch re-invert the success/error handling to fix it.

Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1260263815-5167-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Cleanup for cpu_clock_perf_event_update()

Using atomic64_xchg() instead of atomic64_read() and
atomic64_set().

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F19DC.90204@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Allocate children's perf_event_ctxp at the right time

In current code, children task will allocate memory for
'child->perf_event_ctxp' if the parent is counted, we can
do it only if the parent allowed children inherit it.

It can save memory and reduce overhead.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F19A8.5040805@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Clean up __perf_event_init_context()

Clean up the code a bit:

- define 'perf_cpu_context' variable with 'static'
- use kzalloc() instead of kmalloc() and memset()

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F194D.7080306@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

hw-breakpoints: Modify breakpoints without unregistering them

Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.

This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.

So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Update perf-probe document

Add --list and --del option descriptions to perf-probe.txt.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091208220330.10142.73296.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Support --del option

Support perf probe --del <event> option. Currently,
perf probe can have only one event for each --del option.
If you'd like to delete several probe events, you need
to specify --del for each events.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220323.10142.62079.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

trace-kprobe: Support delete probe syntax

Support delete probe syntax. The syntax is "-:[group/]event".

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220316.10142.39192.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Support vmlinux on cwd by default

Support vmlinux on current working direcotry by default and
also update file-open messages.
Now perf probe searches ./vmlinux too.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220309.10142.33040.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Remove event suffix number _0

Remove event suffix number _0 if it is the first.
The first event has no suffix, and from the second,
each event has suffix number counted from _1. This
reduces typing cost :-).

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220301.10142.50031.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Fix add-probe command syntax without --add option

Fix add-probe command syntax without --add option.
perf-probe supports add-probe command without --add
option. But it treats each argument as an event definition.
e.g.

perf probe func arg1 arg2

is interpreted as

perf probe --add func --add arg1 --add arg2

But it may be useless in many cases.

This patch fixes this syntax to fold those arguments into
one event definition if there is no --add option. With this
change, above command is interpreted as below;

perf probe --add "func arg1 arg2"

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220254.10142.73767.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Change probe-added message more user-friendly

Change probe-added message more user-friendly expression and
show usage of new events.

Before:
Added new event: p:probe/schedule_0 schedule+10 prev=%ax cpu=%bx

After:
Added new event:
probe:schedule_1 (on schedule+1 with prev cpu)

You can now use it on all perf tools, such as:

perf record -e probe:schedule_1 -a sleep 1

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220247.10142.91642.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Change event list format

Change event list format for user readability. perf probe --list
shows event list in "[GROUP:EVENT] EVENT-DEFINITION" format, but
this format is different from the output of perf-list, and
EVENT-DEFINITION is a bit blunt. This patch changes the format to
more user friendly one.

Before:
[probe:schedule_0] schedule+10 prev cpu

After:
probe:schedule_0 (on schedule+10 with prev cpu)

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220240.10142.42916.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: hw_breakpoints: Fix percpu namespace clash

Today's linux-next build failed with:

kernel/hw_breakpoint.c:86: error: 'task_bp_pinned' redeclared as different kind of symbol
...

Caused by commit dd17c8f72993f9461e9c19250e3f155d6d99df22 ("percpu:
remove per_cpu__ prefix") from the percpu tree interacting with
commit 56053170ea2a2c0dc17420e9b94aa3ca51d80408 ("hw-breakpoints:
Fix task-bound breakpoint slot allocation") from the tip tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20091208182515.bb6dda4a.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf events: hw_breakpoints: Don't include asm/hw_breakpoint.h in user space

asm/hw_breakpoint.h is evidently a kernel internal file and
should not be included globally, not even under an #ifdef.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <200912071712.58650.arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Use pr_debug for debug message

Use pr_debug() for "missing vmlinux" debugging message.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170059.19230.51459.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Check e_snprintf() format string

Check e_snprintf() format string by gcc, and fix a bug of
e_snprintf() caller.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170053.19230.7690.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Fix event namelist to duplicate string

Fix event namelist to duplicate string. Without duplicating, adding
multiple probes causes stack overwrite bug, because it reuses a
buffer on stack while the buffer is already added in the namelist.
String duplication solves this bug because only contents of the
buffer is copied to the namelist.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170046.19230.55557.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf probe: Fix strtailcmp() to compare s1and s2[0]

Fix strtailcmp() to compare s1[0] and s2[0]. strtailcmp() returns 0
if "a" and "b" or "a" and "ab", it's a wrong behavior. This patch
fixes it.

Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Juha Leppanen <juha_motorsportcom@luukku.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170040.19230.37464.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 insn: Delete empty or incomplete inat-tables.c

Delete empty or incomplete inat-tables.c if gen-insn-attr-x86.awk
failed, because it causes a build error if user tries to build
kernel next time.

Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170033.19230.37688.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Compile insn.c and inat.c only for KPROBES

At least, insn.c and inat.c is needed for kprobe for now. So,
this compile those only if KPROBES is enabled.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <878wdg8icq.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Optimize parse_subsystem_tracepoint_event()

Uses of strcat are almost always signs that someone is too lazy
to think about the code a bit more carefully. One always has to
know about the lengths of the strings involved to avoid buffer
overflows.

This is one case where the size of the object code for me is
reduced by 38 bytes. The code should also be faster, especially
if flags is non-NULL.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: jaswinderrajput@gmail.com
Cc: paulus@samba.org
LKML-Reference: <200912061825.nB6IPUa1023306@hs20-bc2-1.build.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf trace/scripting: Don't display 'scripting unsupported' msg unnecessarily

The 'scripting unsupported' message should only be displayed
when the -s or -g options are used, and not when they aren't, as
the current code does.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: rostedt@goodmis.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1260163919-6679-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/urgent' of git://git./linux/kernel/git/frederic/random-tracing into perf/urgent

hw-breakpoints: Fix task-bound breakpoint slot allocation

Whatever the context nature of a breakpoint, we always perform the
following constraint checks before allocating it a slot:

- Check the number of pinned breakpoint bound the concerned cpus
- Check the max number of task-bound breakpoints that are belonging
to a task.
- Add both and see if we have a reamining slot for the new breakpoint

This is the right thing to do when we are about to register a cpu-only
bound breakpoint. But not if we are dealing with a task bound
breakpoint. What we want in this case is:

- Check the number of pinned breakpoint bound the concerned cpus
- Check the number of breakpoints that already belong to the task
in which the breakpoint to register is bound to.
- Add both

This fixes a regression that makes the "firefox -g" command fail to
register breakpoints once we deal with a secondary thread.

Reported-by: Walt <w41ter@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>

hw-breakpoints: Zeroe the breakpoint attrs on initialization

The perf attrs used to set up breakpoint parameters are often allocated
in the stack and not zeroed out before calling hw_breakpoint_init().
Handle it from this helper to avoid random attributes set by the stack.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>

perf trace/scripting: Fix compile error when libperl not installed

When I added the xs callbacks into perf, I forgot to re-check
the no-libperl case. This patch fixes the undefined reference
error for that.

Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260153712.6564.4.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Eliminate raw->size

raw->size is not used, this patch just cleans it up.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C8CC4.4050007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Fix __dsos__write_buildid_table()

The remain buff size is 'len - pos->long_name_len - 1', not
'len - pos->long_name_len + 1'

This bug was introduced by commit 7691b1e ("perf tools: Misc small
fixes").

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C7F73.80707@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_event: Fix raw event processing

We use 'data.raw_data' parameter to call process_raw_event(),
but data.raw_data buffer not include data size. it can make perf
tool crash.

This bug was introduced by commit 180f95e29a ("perf: Make common
SAMPLE_EVENT parser").

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C7F45.5080105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf/sched: Fix 'perf sched trace'

If we use 'perf sched trace', it will call symbol__init() again,
and can lead to a perf tool crash:

[root@localhost perf]# ./perf sched trace
*** glibc detected *** ./perf: free(): invalid next size (normal): 0x094c1898 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7602404]
/lib/libc.so.6(cfree+0x96)[0xb76043b6]
./perf[0x80730fe]
./perf[0x8074c97]
./perf[0x805eb59]
./perf[0x80536fd]
./perf[0x804b618]
./perf[0x804bdc3]
/lib/libc.so.6(__libc_start_main+0xe5)[0xb75a9735]
./perf[0x804af81]
======= Memory map: ========
08048000-08158000 r-xp 00000000 fe:00 556831     /home/eric/....
08158000-08168000 rw-p 0010f000 fe:00 556831     /home/eric/...
08168000-085fe000 rw-p 00000000 00:00 0
094ab000-094cc000 rw-p 00000000 00:00 0          [heap]

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4B1C7EE1.8030906@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf buildid-list: Fix copy'n'paste help message

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260129790-11520-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Misc small fixes

- util/header.c
"len" is aligned to 64. So, it tries to write the out of
long_name buffer.

So, this use "zero_buf" to write aligned area.

- util/trace-event-read.c
"size" is not including nul byte. So, this allocates it, and set '\0'.

- util/trace-event-parse.c
It needs parens to calc correct size.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87d42s8iiu.fsf_-_@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Make common SAMPLE_EVENT parser

Currently, sample event data is parsed for each commands, and it
is assuming that the data is not including other data. (E.g.
timechart, trace, etc. can't parse the event if it has
PERF_SAMPLE_CALLCHAIN)

So, even if we record the superset data for multiple commands at
a time, commands can't parse. etc.

To fix it, this makes common sample event parser, and use it to
parse sample event correctly. (PERF_SAMPLE_READ is unsupported
for now though, it seems to be not using.)

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87hbs48imv.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf timechart: Fix header handling

Update "struct trace_entry" to match with current one. And
remove "size" field from it.

If it has "size", it become cause of alignment mismatch of
structure with kernel.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <87ljhg8ioe.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, perf probe: Fix warning in test_get_len()

Fix the following warning:

arch/x86/tools/test_get_len.c: In function "main":
arch/x86/tools/test_get_len.c:116: warning: unused variable "c"

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf tools: Correct size computation in tracepoint_id_to_path()

The size argument to zalloc should be the size of desired
structure, not the pointer to it.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression *x;
@@

x =
<+...
-sizeof(x)
+sizeof(*x)
...+>// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <Pine.LNX.4.64.0912061016120.20858@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Fixup wrong debug exception frame link in stacktraces

While dumping a stacktrace, the end of the exception stack won't link
the frame pointer to the previous stack.

The interrupted stack will then be considered as unreliable and ignored
by perf, as the frame pointer is unreliable itself.

This happens because we overwrite the frame pointer that links to the
interrupted frame with the address of the exception stack. This is
done in order to reserve space inside.
But rbp has been chosen here only because it is not a scratch register,
so that the address of the exception stack remains in rbp after calling
do_debug(), we can then release the exception stack space without the
need to retrieve its address again.

But we can pick another non-scratch register to do that, so that we
preserve the link to the interrupted stack frame in the stacktraces.

Just randomly choose r12. Every registers are saved just before and
restored just after calling do_debug(). And r12 is not used in the
middle, which makes it a perfect candidate.

Example: perf record -g -a -c 1 -f -e mem:$(tasklist_lock_addr):rw

Before:
    44.18%  [k] _raw_read_lock
            |
            |
            ---  |--6.31%-- waitid
                 |
                 |--4.26%-- writev
                 |
                 |--3.63%-- __select
                 |
                 |--3.15%-- __waitpid
                 |          |
                 |          |--28.57%-- 0x8b52e00000139f
                 |          |
                 |          |--28.57%-- 0x8b52e0000013c6
                 |          |
                 |          |--14.29%-- 0x7fde786dc000
                 |          |
                 |          |--14.29%-- 0x62696c2f7273752f
                 |          |
                 |           --14.29%-- 0x1ea9df800000000
                 |
                 |--3.00%-- __poll

After:

    43.94%  [k] _raw_read_lock
            |
            --- _read_lock
               |
               |--60.53%-- send_sigio
               |          __kill_fasync
               |          kill_fasync
               |          evdev_pass_event
               |          evdev_event
               |          input_pass_event
               |          input_handle_event
               |          input_event
               |          synaptics_process_byte
               |          psmouse_handle_byte
               |          psmouse_interrupt
               |          serio_interrupt
               |          i8042_interrupt
               |          handle_IRQ_event
               |          handle_edge_irq
               |          handle_irq
               |          __irqentry_text_start
               |          ret_from_intr
               |          |
               |          |--30.43%-- __select
               |          |
               |          |--17.39%-- 0x454f15
               |          |
               |          |--13.04%-- __read
               |          |
               |          |--13.04%-- vread_hpet
               |          |
               |          |--13.04%-- _xcb_lock_io
               |          |
               |           --13.04%-- 0x7f630878ce87

Note: it does not only affect perf events but also other stacktraces in
x86-64. They were considered as unreliable once we quit the debug
stack frame.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>

x86/perf: Exclude the debug stack from the callchains

Dumping the callchains from breakpoint events with perf gives strange
results:

3.75%             perf  [kernel]           [k] _raw_read_unlock
                       |
                       --- _raw_read_unlock
                           perf_callchain
                           perf_prepare_sample
                           __perf_event_overflow
                           perf_swevent_overflow
                           perf_swevent_add
                           perf_bp_event
                           hw_breakpoint_exceptions_notify
                           notifier_call_chain
                           __atomic_notifier_call_chain
                           atomic_notifier_call_chain
                           notify_die
                           do_debug
                           debug
                           munmap

We are infected with all the debug stack. Like the nmi stack, the debug
stack is undesired as it is part of the profiling path, not helpful for
the user.

Ignore it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

perf: Remove the "event" callback from perf events

As it is not used anymore and has been superseded by overflow_handler.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

hw-breakpoints: Use overflow handler instead of the event callback

struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.

We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

hw-breakpoints: Drop callback and task parameters from modify helper

Drop the callback and task parameters from modify_user_hw_breakpoint().
For now we have no user that need to modify a breakpoint to the point
of changing its handler or its task context.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

perf: Remove unused struct perf_event::event_callback

This field might result from an older manual rebasing mistake.
We don't use it.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

perf: Remove pointless union that wraps the hw breakpoint fields

It stands to anonymize a structure, but structures can already
anonymize by themselves.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

hw-breakpoints: Add two reserved fields for future extensions

Add two reserved fields for future extensions in the hardware
breakpoints interface. Further needs may arise.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

Merge branch 'perf/probes' into perf/core

Merge reason: add these fixes to 'perf probe'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/mce' into perf/core

Merge reason: It's ready for v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/scripting' into perf/core

Merge reason: it's ready for v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Fix comments of register/stack access functions

Fix typos and some redundant comments of register/stack access
functions in asm/ptrace.h.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <20091201000222.7669.7477.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Wenji Huang <wenji.huang@oracle.com>

perf tools: Replace %m with %a in sscanf

Not all glibc support %m and it results in a compile error if
%m not supported. Replace it with %a and (float *) casts.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: peterz@infradead.org
Cc: mhiramat@redhat.com
LKML-Reference: <1259743374-9950-1-git-send-email-liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

hw-breakpoints: Keep track of user disabled breakpoints

When we disable a breakpoint through dr7, we unregister it right
away, making us lose track of its corresponding address
register value.

It means that the following sequence would be unsupported:

- set address in dr0
- enable it through dr7
- disable it through dr7
- enable it through dr7

because we lost the address register value when we disabled the
breakpoint.

Don't unregister the disabled breakpoints but rather disable
them.

Reported-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259735536-9236-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tracing/syscalls: Make syscall events print callbacks static

enter_syscall_print_##sname and exit_syscall_print_##sname don't
need to have a global scope. Make them static.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1259734990-9034-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>