[PATCH] arm26: kernel/irq.c: fix compilation

It's trying to "continue;" in "if" statement.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] arm26: add L1_CACHE_SHIFT

Fix reiserfs compilation as a side effect =)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix arm26 THREAD_SIZE

arm26 currently has a 256 kB THREAD_SIZE (sic).

Looking at the comment in the code, this seems to be based on a
misunderstanding.

The comment says:
this needs attention (see kernel/fork.c which gets a nice div by zero if
this is lower than 8*32768

kernel/fork.c does:
  max_threads = mempages / (8 * THREAD_SIZE / PAGE_SIZE)

Therefore, a division by 0 is impossible for all reasonable cases with
THREAD_SIZE >= PAGE_SIZE.

Since the minimum PAGE_SIZE Linux uses on the arm26 architecture is 16k,
PAGE_SIZE should be sufficient for THREAD_SIZE.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: remove gcc version check for CONFIG_REGPARM

Since we do no longer support any gcc < 3.0, there's no need to check
for it..

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

[PATCH] hrtimer comment tweak

Fix a comment which missed an update cycle somewhere.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://oss.sgi.com:8090/oss/git/xfs-2.6

[PATCH] Fix drivers/block/ps2esdi.c compile

Looks like fallout from the geo stuff.

Merge branch 'for-linus' of /linux/kernel/git/scjody/ieee1394

Pull perfmon-montecito into release branch

[IA64] Cleanup of arch/ia64/sn and include/asm-ia64/sn

Replace uintX_t declarations with uX declarations.
Replace intX_t declarations with sX declarations.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Actually remove amdtp.[ch], cmp.[ch].

The feature removal was done in 7301c8d3a05dc52d33598364da7c4eb6ab6357eb
but these files were not removed for some reason.

Signed-off-by: Jody McIntyre <scjody@modernduck.com>

[IA64] pal cache flush patch

Because PAL spec has changed since 2002, you can goto
http://developer.intel.com/design/itanium/manuals/iiasdmanual.htm to
download new SDM, all PAL calls should be invoked with psr.ic=1, and
it's caller's responsibility to handle possible tlb miss.
Ia64_pal_cache_flush was written according to old spec, it is obsolete,
and this patch has ia64_pal_cache_flush conform to new spec.

Signed-off-by Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Stop multiple pci_claim_resource() call for the same resource

This patch fixes the bug that pci_claim_resource() is called multiple
times for the same P2P bridge's resource structures if P2P bridges
require their own PCI I/O resources.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Make alloc_page_buffers() initialise buffer_heads using init_buffer(),
like other routines here, to ensure buffers are correctly initialised
with respect to b_private/b_end_io.  Fixes an odd interaction between
XFS and reiserfs.

Signed-off-by: Nathan Scott <nathans@sgi.com>

[IA64] Simple memory hot-add for ia64.

First step to memory hotplug for ia64 (add only,
all new memory is added to node 0, does not use
ZONE_EASY_RECLAIM yet).

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

x86-64: fix initrd freeing

The comparison of the initrd start address against "&_end" is
unnecessary and incorrect.  Make it match the x86 code that just
compares the passed-in arguments.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Increase NR_IRQ_VECTORS to 32 * NR_CPUS

This prevents running out of GSIs on large Unisys ES7000 machines.
Follows i386

Cc: "Protasevich, Natalie" <Natalie.Protasevich@unisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Don't try to put kernel page tables beyond ZONE_DMA32.

For not fully explained reasons it broke mem=... on several setups.

Also minor cleanup.

Cc: axboe@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: set do_not_nx as cpuinitdata

'check_efer' uses 'do_not_nx'. Hotpluged CPU could wrongly disable NX.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: lapic resume uses correct base address

uses correct lapic base address. The set_fixmap appears useless.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Only let user select PM timer support when EMBEDDED

To avoid mistakes.

I got a few reports where people got broken timing because they didn't
have the PMTIMER fallback.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Allow nesting of int3 by default for kprobes

This unbreaks recursive kprobes which didn't work anymore
due to an earlier patch which converted the debug entry point
to use an IST.

This also allows nesting of the debug entry point too.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Mark powernow k8 init functions as __cpuinit

cpufreq init can be called when a CPU is set online.
Need to make powernow-k8's initialisation functions __cpuinit to
prevents oopses when a CPU is off/onlined on a AMD system

Cc: trenn@suse.de
Cc: mark.langsdorf@amd.com
Cc: davej@redhat.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/sam/kbuild

[IA64] Perfmon for Montecito

Add Montecito PMU description table for perfmon2

Signed-off-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

kbuild: fix 'make all install_modules install'

The command 'make all modules_install install' would fail
in a virgin tree - pointing at a non-existing directory under
/lib/modules/xxx

KERNELRELEASE is part of MODLIB and we need to create .kernelrelease
before we can properly evaluate KERNELRELEASE,
Changing MODLIB to the recursively expanded flavor let it pick up
the correct KERNELRELEASE value.

Reported by: "Hemmann, Volker Armin" <volker.armin.hemmann@tu-clausthal.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

kbuild: create .kernelrelease at *config step

To enable 'make kernelrelease' earlier now create .kernelrelease when
one of the *config targets are used.
Also introduce KERNELVERSION - only user is kconfig.
KERNELVERSION was needed to display kernel version in menuconfig -
KERNELRELEASE is not valid until configuration has completed.
kconfig files modified to use KERNELVERSION.
Bug reported by: Rene Rebe <rene@exactcode.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Merge git://oss.sgi.com:8090/oss/git/xfs-2.6

[XFS] remove no-longer-needed IS_NOATIME macro, twas just a build workaround

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] mutex fallout - fix debug builds and remove no-longer-useful comment.

Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Fix symlink creation too, with respect to initialising SELinux
context.

SGI-PV: 946762
SGI-Modid: xfs-linux-melb:xfs-kern:24983a

Signed-off-by: Nathan Scott <nathans@sgi.com>

Merge git://git./linux/kernel/git/bunk/trivial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

[PATCH] MAINTAINERS: watchdog device drivers

Add a MAINTAINER entry for the watchdog device drivers.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[WATCHDOG] sa1100_wdt.c sparse cleanups

The following makes drivers/char/watchdog/sa1100_wdt.c sparse clean.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

kbuild: fix make -jN with multiple targets with O=...

The way multiple targets was handled with make O=...
broke because for each high-level target make spawned
a parallel make resulting in a broken build.
Reported by Keith Owens <kaos@ocs.com.au>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

[PATCH] Use atomic64_set for 64-bit case of atomic_long_set

For some reason, the BITS_PER_LONG == 64 case of atomic_long_set
was using atomic_set instead of atomic64_set. This does not jive
with architectures which use an inline instead of a #define to
implement their atomic_set() primitives.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix zoran_card compilation warning

Fix the following warning which was introduced in 2.6.15-git8 by
commit 7408187d223f63d46a13b6a35b8f96b032c2f623:

  CC [M]  drivers/media/video/zoran_card.o
drivers/media/video/zoran_card.c: In function `zr36057_init':
drivers/media/video/zoran_card.c:1053: warning: assignment makes integer from pointer without a cast

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/paulus/powerpc-merge

[ARM] Fix missing compiler.h include

asm/mach/arch.h introduced a __deprecated, but didn't include compiler.h,
causing:

In file included from arch/arm/mach-at91rm9200/devices.c:13:
include/asm/mach/arch.h:23: warning: no semicolon at end of struct or union
include/asm/mach/arch.h:23: error: syntax error before 'phys_ram'
include/asm/mach/arch.h:34: error: syntax error before ':' token
include/asm/mach/arch.h:35: error: syntax error before ':' token
include/asm/mach/arch.h:36: error: syntax error before ':' token
include/asm/mach/arch.h:37: error: syntax error before ':' token
include/asm/mach/arch.h:45: error: syntax error before '}' token

Add the necessary include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

kconfig: get rid of stray a.o, support ncursesw

scripts/kconfig/lxdialog/check-lxdialog.sh uses gcc to check for
what libraries are present. Redirect output to /dev/null
so we do not generate an a.out.
Also included support for ncursesw - so if present prefer that
instead of ncurses.
The order is now (first is preferred):
1) ncursesw
2) ncurses
3) curses

The latter is to support SunOS.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

powerpc/32: Restore previous version of 32-bit PCI code

When I removed the powermac support from arch/ppc/kernel/pci.c,
I overlooked the fact that that file is used in 32-bit ARCH=powerpc
builds.  To prevent problems in future, restore the original version
of that file as arch/powerpc/kernel/pci_32.c, and use that.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Make ARCH=powerpc the default for 32-bit ppc

This makes ARCH=powerpc the default on 32-bit powerpc machines,
where uname -m returns ppc, as well as on 64-bit powerpc machines.
Most people who would be likely to build their own kernels on
32-bit powerpc machines would be using powermacs or CHRP machines,
both of which are supported with ARCH=powerpc now.  Embedded ppc
developers whose ports haven't been moved over to arch/powerpc
yet will have to explicitly set ARCH=ppc now.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc: Remove powermac support from ARCH=ppc

This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>

x86: Work around compiler code generation bug with -Os

Some versions of gcc generate incorrect code for the inet_check_attr()
function, apparently due to a totally bogus index -> pointer comparison
transformation.

At least "gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)" from FC4 is
affected, possibly others too.

This changes the function subtly so that the buggy gcc transformation
doesn't trigger.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] powerpc: Kconfig changes for CRASH_DUMP

Noticed in 2.6.15-git9 that CRASH_DUMP option is moved to top level.
Moved CRASH_DUMP into "kernel options" next to KEXEC and this config
option supports only for PPC64 at this time.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Update pmac32_defconfig

Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-mmc

Merge master.kernel.org:/home/rmk/linux-2.6-arm

[PATCH] When CONFIG_CC_OPTIMIZE_FOR_SIZE, allow gcc4 to control inlining

If optimizing for size (CONFIG_CC_OPTIMIZE_FOR_SIZE), allow gcc4 compilers
to decide what to inline and what not - instead of the kernel forcing gcc
to inline all the time.  This requires several places that require to be
inlined to be marked as such, previous patches in this series do that.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pktcdvd: un-inline some functions

Un-inline two functions in the pktcdvd driver.  This makes the compiled code
172 bytes smaller on my system.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Mark some key VFS functions as __always_inline

Mark a few VFS functions as mandatory inline (based on Al Viro's request);
these must be inline due to stack usage issues during a recursive loop that
happens during the recursive symlink resolution (symlink to a symlink to a
symlink ..)

This patch at this point does not change behavior and is for documentation
purposes only (but this changes later in the series)

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mark several functions __always_inline

      Arjan van de Ven <arjan@infradead.org>

Mark a number of functions as 'must inline'.  The functions affected by this
patch need to be inlined because they use knowledge that their arguments are
constant so that most of the function optimizes away.  At this point this
patch does not change behavior, it's for documentation only (and for future
patches in the inline series)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] enable unit-at-a-time optimisations for gcc4

Allow gcc4 compilers to optimize unit-at-a-time.

This flag enables gcc to "see" the entire C file before making optimisation
decisions such as inline, which results in gcc making better decisions.  One
of the immediate effects of this is that static functions that are used only
once now get inlined.

gcc 3.4 has this flag as well, however gcc 3.x have a problem with inlining
and stacks and as a result, enabling this flag there would cause excessive and
unacceptable stack use.  This problem is fixed in the gcc 4.x series.  The
x86-64 architecture already enables this feature so it's well tested already.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Make __always_inline actually force always inlining

This patch is the first in a series that tries to optimize the kernel in terms
of size (and thus cache behavior, both cpu and pagecache).

This first patch changes __always_inline to be a forced inline instead of the
"regular" inline it was on everything except alpha.  This forced inline
matches the intention of the define better as a matter of documentation.
There is no change in behavior by this patch, since "inline" currently is
mapped to a forced inline anyway.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Update maintainers list

Update maintainers list.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Sanitize ->fb_mmap prototype

No need for a file argument.  If we'd really need it it's in vma->vm_file
already.  gbefb and sgivwfb used to set vma->vm_file to the file argument, but
the kernel alrady did that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Sanitize ->fb_ioctl prototype

The ioctl and file arguments to ->fb_mmap are totally unused and there's not
reason a driver should need them.

Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gx1fb: (try to) play nicer with various BIOSes

Seems that the CS5530A chip used in Geode GX1 systems has some crazy feature
that causes SMI traps when accessing the PCI configuration space of the video
device.  Various GX1 BIOSes seem to use this 'feature' to hide the real BARs
of the device.  This patch disables these traps (in an early PCI fixup) so
that Linux sees the real, physical BARs and not the virtual ones provided by
the BIOS.

This should allow the GX1 framebuffer driver to work on more systems that have
different BIOSes as the driver no longer guesses at what the virtual BARs
mean.

I'm not entirely sure it the correct solution as I can neither test regular
VGA console nor the X's 'cyrix' video driver so there might be some breakage
there -- probably best to get some more testers before applying it.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] neofb: take existing display configuration as default

On a Dell Latitude CPi-A I noticed a strangeness wrt.  the handling of an
external monitor by the neomagic framebuffer driver, namely when the laptop is
docked in a C/Dock II with the lid shut.

A cold boot would result in the BIOS configuring the video chip to use the
"external monitor only" mode, yet neofb would default to "internal LCD only".
An attempt for a quick fix by using the Fn-F8 keystroke to toggle the display
combination modes resulted in a reproductible hard lock, powering down being
the only solution.

The attached patch makes neofb probe the register for the current display
mode, using that value as a default if nothing was specified as kernel/module
parameter.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Update kernel-parameters.txt IOSCHED to spell out 'anticipatory'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nlm kernel-parameters update

Add 2 lockd kernel parameters and spell 2 others correctly.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Olaf Kirch <okir@suse.de>
Cc: <buraphalinuxserver@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: add ixdp2351 support

This patch adds support for the Intel IXDP2351 to the CS89x0 driver.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: use u16 for device register data

cs89x0 inconsistently used 'int' and 'u32' for device register data.
As the cs89x0 is a 16-bit chip, change the I/O accessors over to 'u16'.
(Spotted by Deepak Saxena.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: use #elif instead of #else/#if/#endif

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cs89x0: credit Dmitry Pervushin

Credit Dmitry Pervushin for the PNX010X platform support.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dell_rbu: fix Bug 5854

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=5854

Root cause:

The dell_rbu driver creates entries in /sys/class/firmware/dell_rbu/ by
calling request_firmware_nowait (without hotplug ) this function inturn
starts a kernel thread which creates the entries in
/sys/class/firmware/dell_rbu/loading , data and the thread waits on the
user action to return control back to the callback fucntion of dell_rbu.
The thread calls wait_on_completion which puts it in a D state until the
user action happens.  If there is no user action happening the load average
goes up as the thread D state is taken in to account.  Also after
downloading the BIOS image the enrties go away momentarily but they are
recreated from the callback function in dell_rbu.  This causes the thread
to get recreated causing the load average to permenently stay around 1.

Fix:

The dell_rbu also creates the entry
/sys/devices/platform/dell_rbu/image_type at driver load time.  The image
type by default is mono if required the user can echo packet to image_type
to make the BIOS update mechanism using packets.  Also by echoing init in
to image_type the /sys/class/firmware/dell_rbu entries can be created.

The driver code was changed to not create /sys/class/firmware/dell_rbu
entries during load time, and also to not create the above entries from the
callback function.  The entries are only created by echoing init to
/sys/devices/platform/dell_rbu/image_type The user now needs to create the
entries to download the image monolithic or packet.  This fixes the issue
since the kernel thread only is created when ever the user is ready to
download the BIOS image; this minimizes the life span of the kernel thread
and the load average goes back to normal.

Signed off by Abhay Salunke <abhay_salunke@dell.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] smbfs: remove kmalloc wrapper

Remove the remaining kmalloc() wrapper bits from fs/smbfs/.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ncpfs: remove kmalloc wrapper

Remove remaining kmalloc wrapper bits from fs/ncpfs/.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] abandon gcc 295x main.c tidy

After abandon-gcc-295x.patch, this relocates the error-out-early comment.

Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] quota: make useless quota error message informative

fs/quota_v2.c can, under some conditions, issue a kernel message that says,
in totality, 'failed read'.  This patch does the following:

1) Gives a hint who issued the error message, so people reading the logs
   don't have to go grepping the entire kernel tree (with 11 false
   positives).

2) Say what amount of data we expected, and actually got.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] reiserfs: remove d_splice_alias NULL check from reiserfs_lookup

Remove redundant NULL check in reiserfs_lookup() as d_splice_alias() can take
NULL inode as input.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] isofs: remove d_splice_alias NULL check from isofs_lookup

Remove redundant NULL check in isofs_lookup() as d_splice_alias() can take
NULL inode as input.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: remove d_splice_alias NULL check from ext3_lookup

Remove redundant NULL check in ext3_lookup() as d_splice_alias() can take NULL
inode as input.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext2: remove d_splice_alias NULL check from ext2_lookup

Remove redundant NULL check in ext2_lookup() as d_splice_alias() can take NULL
inode as input.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cpuset oom lock fix

The problem, reported in:

  http://bugzilla.kernel.org/show_bug.cgi?id=5859

and by various other email messages and lkml posts is that the cpuset hook
in the oom (out of memory) code can try to take a cpuset semaphore while
holding the tasklist_lock (a spinlock).

One must not sleep while holding a spinlock.

The fix seems easy enough - move the cpuset semaphore region outside the
tasklist_lock region.

This required a few lines of mechanism to implement.  The oom code where
the locking needs to be changed does not have access to the cpuset locks,
which are internal to kernel/cpuset.c only.  So I provided a couple more
cpuset interface routines, available to the rest of the kernel, which
simple take and drop the lock needed here (cpusets callback_sem).

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: fix blk_queue_ordered call in dasd.c fixup

The QUEUE_ORDERED_* numbers got renumbered and by accident the dasd driver
was changed to use QUEUE_ORDERED_DRAIN instead of QUEUE_ORDERED_TAG.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: email-address change

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: chps[] array too short

The chps[] array in struct channel_subsystem is one too short; therefore the
code doesn't realize the chpid ff is already known.  When several devices on
chpid ff become available, the message "new_channel_path: could not register
ff" is displayed for every device but the first one.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: cputime misaccounting

finish_arch_switch needs to update the user cpu time as well, not just the
system cpu time.  Otherwise the partial user cpu time of a process that is
stored in the lowcore will be (mis-)accounted to the next process.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: fix blk_queue_ordered call in dasdc

Add the missing third argument to the blk_queue_ordered call and use the
constant QUEUE_ORDERED_DRAIN instead of "1".

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: add dummy pm_power_off

Define a dummy pm_power_off pointer to make sys_reboot happy.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: spinlock fixes

Remove useless spin_retry_counter and fix compilation for UP kernels.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: fix cpcmd calls on UP

Add missing fourth argument to cpcmd calls under !CONFIG_SMP.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: sigcontext.h vs __user

Add an include of linux/compiler.h in sigcontext.h to avoid compiler errors in
user space apps because of a missing definition for __user.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: show_task oops

The show_task function walks the kernel stack backchain of processes assuming
that the processes are not running.  Since this assumption is not correct
walking the backchain can lead to an addressing exception and therefore to a
kernel hang.  So prevent the kernel hang (you still get incorrect results)
verity that all read accesses are within the bounds of the kernel stack before
performing them.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: sha256 crypto code fix

Fix processing of messages larger than 2 * SHA256_BLOCK_SIZE.

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: aes crypto code fixes

Call KM[C] only with a multiple of block size.  Check return value of KM[C]
instructions and complain about erros

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: des crypto code speedup

Provide ECB and CBC encrypt / decrypt functions to crypto API to speed up our
hardware accelerated DES implementation.  This new functions allow the crypto
API to call ECB / CBC directly with large blocks in difference to the old
functions that were calles with algorithm block size (8 bytes for DES).

This is up to factor 10 faster than our old hardware implementation :)

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: des crypto code cleanup

Beautify the s390 in-kernel-crypto des code.

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: fix stack dump loglevel

Recent changes caused part of stack traces from SysRq-T to print at
KERN_EMERG loglevel.  Also, parts of stack dump during oops were failing to
print at that level when they should.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: put HOTPLUG_CPU under Processor type, not Bus options

Move the HOTPLUG_CPU option under "Processor type" instead of under "Bus
options".  This makes it the same for i386 as most other processor types
(arm, ia64, parisc, ppc, s390, & x86_64; but not for powerpc).  Besides, it
takes me too long to find it under Bus options.  I can't be the only person
who has trouble finding it.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] powerpc: Add support for the MPC83xx watchdog

Add support for the PowerPC MPC83xx watchdog.  The MPC83xx has a simple
watchdog that once enabled it can not be stopped, has some simple timeout
range selection, and the ability to either reset the processor or take a
machine check.

Signed-off-by: Dave Updegraff <dave@cray.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add tmpfs options for memory placement policies

Anything that writes into a tmpfs filesystem is liable to disproportionately
decrease the available memory on a particular node.  Since there's no telling
what sort of application (e.g.  dd/cp/cat) might be dropping large files
there, this lets the admin choose the appropriate default behavior for their
site's situation.

Introduce a tmpfs mount option which allows specifying a memory policy and
a second option to specify the nodelist for that policy.  With the default
policy, tmpfs will behave as it does today.  This patch adds support for
preferred, bind, and interleave policies.

The default policy will cause pages to be added to tmpfs files on the node
which is doing the writing.  Some jobs expect a single process to create
and manage the tmpfs files.  This results in a node which has a
significantly reduced number of free pages.

With this patch, the administrator can specify the policy and nodes for
that policy where they would prefer allocations.

This patch was originally written by Brent Casavant and Hugh Dickins.  I
added support for the bind and preferred policies and the mpol_nodelist
mount option.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix for CONFIG_NUMA without CONFIG_SWAP

Some people apparently run CONFIG_NUMA without CONFIG_SWAP.  The migration
code currently depends on swap.  This patch provides a set of inline
fallback functions so that the kernel properly compiles.  However, calls to
migration functions will fail.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Watchdog: Winsystems EPX-C3 SBC

This is a 2.6 patch that adds support for the watchdog timer built into the
EPX-C3 single board computer manufactured by Winsystems, Inc.

Driver details:

This is for x86 only.  This watchdog is pretty basic and simple.  It is
only configurable via jumpers on the SBC, and it only has either a 1.5s or
200s interval.  The watchdog can either be auto-configured to start as soon
as the machine powers up (bad idea for the 1.5s interval!) or it can be
enabled and disabled by writing to io port 0x1ee.  Petting the watchdog
involves writing any value to io port 0x1ef.

The only unfortunate thing about this watchdog (and it is not at all
uncommmon in watchdogs that linux supports) is that it is not a PCI or
ISA-PNP device and as such it isn't at all probeable.  Either the watchdog
exists as 2 bytes at 0x1ee, or it doesn't.  Thus, using this driver on a
machine that doesn't have that watchdog can potentially hang/crash the
system, etc.  So only use this driver if you in fact are on a Winsystems
EPX-C3 SBC.

Anyway this driver fits into the already-existing watchdog framework quite
nicely and I already tested it on my EPX-C3 and it works like a charm.

Signed-off-by: Calin A. Culianu <calin@ajvar.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix symbol for mktime

  LD      .tmp_vmlinux1
/usr/lib/gcc-lib/i486-linux/3.3.4/../../../libc.a(mktime.o): In function `timelocal':
: multiple definition of `mktime'
kernel/built-in.o:kernel/time.c:604: first defined here
/usr/bin/ld: Warning: size of symbol `mktime' changed from 134 in kernel/built-in.o to 44 in /usr/lib/gcc-lib/i486-linux/3.3.4/../../../libc.a(mktime.o)
collect2: ld returned 1 exit status

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Unlinline a bunch of other functions

Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>