GitHub/MotorolaMobilityLLC/kernel-slsi.git
17 years ago[PATCH] raw: don't allow the creation of a raw device with minor number 0
Jeff Moyer [Sat, 10 Feb 2007 09:46:10 +0000 (01:46 -0800)]
[PATCH] raw: don't allow the creation of a raw device with minor number 0

Minor number 0 (under the raw major) is reserved for the rawctl device
file, which is used to query, set, and unset raw device bindings.  However,
the ioctl interface does not protect the user from specifying a raw device
with minor number 0:

$ sudo ./raw /dev/raw/raw0 /dev/VolGroup00/swap
/dev/raw/raw0:  bound to major 253, minor 2
$ ls -l /dev/rawctl
ls: /dev/rawctl: No such file or directory
$ ls -l /dev/raw/raw0
crw------- 1 root root 162, 0 Jan 12 10:51 /dev/raw/raw0
$ sudo ./raw -qa
Cannot open master raw device '/dev/rawctl' (No such file or directory)

As you can see, this prevents any further raw operations from
succeeding.  The fix (from Steve Fernandez) is quite simple--do not
allow the allocation of minor number 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Steven Fernandez <sfernand@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] audit: fix audit_filter_user_rules() initialization bug
Ingo Molnar [Sat, 10 Feb 2007 09:46:09 +0000 (01:46 -0800)]
[PATCH] audit: fix audit_filter_user_rules() initialization bug

gcc emits this warning:

 kernel/auditfilter.c: In function 'audit_filter_user':
 kernel/auditfilter.c:1611: warning: 'state' is used uninitialized in this function

I tend to agree with gcc - there are a couple of plausible exit paths from
audit_filter_user_rules() where it does not set 'state', keeping the
variable uninitialized.  For example if a filter rule has an AUDIT_POSSIBLE
action.  Initialize to 'wont audit'.  Fix whitespace damage too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ext4: refuse ro to rw remount of fs with orphan inodes
Eric Sandeen [Sat, 10 Feb 2007 09:46:08 +0000 (01:46 -0800)]
[PATCH] ext4: refuse ro to rw remount of fs with orphan inodes

In the rare case where we have skipped orphan inode processing due to a
readonly block device, and the block device subsequently changes back to
read-write, disallow a remount,rw transition of the filesystem when we have an
unprocessed orphan inodes as this would corrupt the list.

Ideally we should process the orphan inode list during the remount, but that's
trickier, and this plugs the hole for now.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ext3: refuse ro to rw remount of fs with orphan inodes
Eric Sandeen [Sat, 10 Feb 2007 09:46:07 +0000 (01:46 -0800)]
[PATCH] ext3: refuse ro to rw remount of fs with orphan inodes

In the rare case where we have skipped orphan inode processing due to a
readonly block device, and the block device subsequently changes back to
read-write, disallow a remount,rw transition of the filesystem when we have an
unprocessed orphan inodes as this would corrupt the list.

Ideally we should process the orphan inode list during the remount, but that's
trickier, and this plugs the hole for now.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] cleanup linux/byteorder/swabb.h
Adrian Bunk [Sat, 10 Feb 2007 09:46:06 +0000 (01:46 -0800)]
[PATCH] cleanup linux/byteorder/swabb.h

- no longer a userspace header
- add #include <linux/types.h> for in-kernel compilation

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] serial: support for new board
Matthias Fuchs [Sat, 10 Feb 2007 09:46:05 +0000 (01:46 -0800)]
[PATCH] serial: support for new board

Add support for the CPCI-ASIO4 quad port CompactPCI UART board from
electronic system design gmbh.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Perle multimodem card (PCI-RAS) detection
Thomas Hoehn [Sat, 10 Feb 2007 09:46:05 +0000 (01:46 -0800)]
[PATCH] Perle multimodem card (PCI-RAS) detection

Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver.  It
may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for
testing.

Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] kernel-doc: fix some odd spacing issues
Randy Dunlap [Sat, 10 Feb 2007 09:46:04 +0000 (01:46 -0800)]
[PATCH] kernel-doc: fix some odd spacing issues

- in man and text mode output, if the function return type is empty (like it
  is for macros), don't print the return type and a following space; this
  fixes an output malalignment;

- in the function short description, strip leading, trailing, and multiple
  embedded spaces (to one space); this makes function name/description output
  spacing consistent;

- fix a comment typo;

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] docbook: add edd firmware interfaces
Randy Dunlap [Sat, 10 Feb 2007 09:46:03 +0000 (01:46 -0800)]
[PATCH] docbook: add edd firmware interfaces

Cleanup kernel-doc notation in drivers/firmware/edd.c.

Add edd.c to DocBook/kernel-api.tmpl.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] RTC framework driver for CMOS RTCs
David Brownell [Sat, 10 Feb 2007 09:46:02 +0000 (01:46 -0800)]
[PATCH] RTC framework driver for CMOS RTCs

This is an "RTC framework" driver for the "CMOS" RTCs which are standard on
PCs and some other platforms.  That's MC146818 compatible silicon.
Advantages of this vs.  drivers/char/rtc.c (use one _or_ the other, only
one will be able to claim the RTC irq) include:

 - This leverages both the new RTC framework and the driver model; both
   PNPACPI and platform device modes are supported.  (A separate patch
   creates a platform device on PCs where PNPACPI isn't configured.)

 - It supports common extensions like longer alarms.  (A separate patch
   exports that information from ACPI through platform_data.)

 - Likewise, system wakeup events use "real driver model support", with
   policy control via sysfs "wakeup" attributes and and using normal rtc
   ioctls to manage wakeup.  (Patch in the works.  The ACPI hooks are
   known; /proc/acpi/alarm can vanish.  Making it work with EFI will
   be a minor challenge to someone with e.g. a MiniMac.)

It's not yet been tested on non-x86 systems, without ACPI, or with HPET.
And the RTC framework will surely have teething pains on "mainstream"
PC-based systems (though must embedded Linux systems use it heavily), not
limited to sorting out the "/dev/rtc0" issue (udev easily tweaked).  Also,
the ALSA rtctimer code doesn't use the new RTC API.

Otherwise, this should be a no-known-regressions replacement for the old
drivers/char/rtc.c driver, and should help the non-embedded distros (and
the new timekeeping code) start to switch to the framework.

Note also that any systems using "rtc-m48t86" are candidates to switch over
to this more functional driver; the platform data is different, and the way
bytes are read is different, but otherwise those chips should be compatible.

[akpm@osdl.org: sparc32 fix]
[akpm@osdl.org: sparc64 fix]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Woody Suwalski <woodys@xandros.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] local_t: Documentation
Mathieu Desnoyers [Sat, 10 Feb 2007 09:46:01 +0000 (01:46 -0800)]
[PATCH] local_t: Documentation

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Common compat_sys_sysinfo
Kyle McMartin [Sat, 10 Feb 2007 09:46:00 +0000 (01:46 -0800)]
[PATCH] Common compat_sys_sysinfo

I noticed that almost all architectures implemented exactly the same
sys32_sysinfo...  except parisc, where a bug was to be found in handling of
the uptime.  So let's remove a whole whack of code for fun and profit.
Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it
would be the best tested.

This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but
instead extracting out the common code from sys_sysinfo.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Numerous fixes to kernel-doc info in source files.
Robert P. J. Day [Sat, 10 Feb 2007 09:45:59 +0000 (01:45 -0800)]
[PATCH] Numerous fixes to kernel-doc info in source files.

A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:

  * make multi-line initial descriptions single line
  * denote some function names, constants and structs as such
  * change erroneous opening '/*' to '/**' in a few places
  * reword some text for clarity

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Discuss a couple common errors in kernel-doc usage.
Robert P. J. Day [Sat, 10 Feb 2007 09:45:58 +0000 (01:45 -0800)]
[PATCH] Discuss a couple common errors in kernel-doc usage.

Explain a couple of the most common errors in kernel-doc usage.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] tty: improve encode_baud_rate logic
Alan Cox [Sat, 10 Feb 2007 09:45:57 +0000 (01:45 -0800)]
[PATCH] tty: improve encode_baud_rate logic

Mostly so people can see the work in progress.  This enhances the encode
function which isn't currently used in the base tree but is when using some of
the testing tty patches.

This resolves a problem with some hardware where applications got confusing
information from the tty ioctls.  Correct but confusing.

In some situations asking for, say, 9600 baud actually gets you 9595 baud or
similar near-miss values.  With the old code this meant that a request for
B9600 got a return of BOTHER, 9595 which programs interpreted as a failure.

The new code now works on the following basis

- If you ask for specific rate via BOTHER, you get a precise return

- If you ask for a standard Bfoo rate and the result is close you get a Bfoo
  return

- If you ask for a standard Bfoo rate and get something way off you get a
  BOTHER/rate return

This seems to fix up the cases I've found where this broke compatibility.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] kernel-doc: allow more whitespace
Randy Dunlap [Sat, 10 Feb 2007 09:45:56 +0000 (01:45 -0800)]
[PATCH] kernel-doc: allow more whitespace

Allow whitespace in pointer-to-function
[accept "(* done)", not just "(*done)"].

Allow tabs (spaces are already allowed) between "#define" and a macro name.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] sysrq: alphabetize command keys doc
Randy Dunlap [Sat, 10 Feb 2007 09:45:55 +0000 (01:45 -0800)]
[PATCH] sysrq: alphabetize command keys doc

Alphabetize the sysrq command keys list.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] proc: remove useless (and buggy) ->nlink settings
Alexey Dobriyan [Sat, 10 Feb 2007 09:45:54 +0000 (01:45 -0800)]
[PATCH] proc: remove useless (and buggy) ->nlink settings

Bug: pnx8550 code creates directory but resets ->nlink to 1.

create_proc_entry() et al will correctly set ->nlink for you.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] kernel-doc: allow a little whitespace
Randy Dunlap [Sat, 10 Feb 2007 09:45:53 +0000 (01:45 -0800)]
[PATCH] kernel-doc: allow a little whitespace

In kernel-doc syntax, be a little flexible:  allow whitespace between
a function parameter name and the colon that must follow it, such as:
@pdev : PCI device to unplug

(This allows lots of megaraid kernel-doc to work without tons of
editing.)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Remove unnecessary memset(0) calls after kzalloc() calls.
Robert P. J. Day [Sat, 10 Feb 2007 09:45:52 +0000 (01:45 -0800)]
[PATCH] Remove unnecessary memset(0) calls after kzalloc() calls.

Delete the few remaining unnecessary calls to memset(0) after a call to
kzalloc().

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] proc_misc warning fix
Andrew Morton [Sat, 10 Feb 2007 09:45:51 +0000 (01:45 -0800)]
[PATCH] proc_misc warning fix

fs/proc/proc_misc.c: In function 'proc_misc_init':
fs/proc/proc_misc.c:764: warning: unused variable 'entry'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] sysctl warning fix
Andrew Morton [Sat, 10 Feb 2007 09:45:51 +0000 (01:45 -0800)]
[PATCH] sysctl warning fix

kernel/sysctl.c:2816: warning: 'sysctl_ipc_data' defined but not used

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] schedule obsolete OSS drivers for removal, 3rd round
Adrian Bunk [Sat, 10 Feb 2007 09:45:50 +0000 (01:45 -0800)]
[PATCH] schedule obsolete OSS drivers for removal, 3rd round

Schedule obsolete OSS drivers (with ALSA drivers that support the same
hardware) for removal.

A rationale of the patch is in
  http://lkml.org/lkml/2006/12/18/305

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-By: Thomas Sailer <sailer@ife.ee.ethz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Add const for time{spec,val}_compare arguments
Rolf Eike Beer [Sat, 10 Feb 2007 09:45:49 +0000 (01:45 -0800)]
[PATCH] Add const for time{spec,val}_compare arguments

The arguments are really const.  Mark them const to allow these functions
being called from places where the arguments are const without getting
useless compiler warnings.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] msdos partitions: fix logic error in AIX detection
Olaf Hering [Sat, 10 Feb 2007 09:45:48 +0000 (01:45 -0800)]
[PATCH] msdos partitions: fix logic error in AIX detection

Correct the AIX magic check to let 'echo > /dev/sdb' actually work.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] relax check for AIX in msdos partition table
Olaf Hering [Sat, 10 Feb 2007 09:45:47 +0000 (01:45 -0800)]
[PATCH] relax check for AIX in msdos partition table

The patch to identify AIX disks and ignore them has caused at least one
machine to fail to find the root partition on 2.6.19. The patch is:

http://lkml.org/lkml/2006/7/31/117

The problem is some disk formatters do not blow away the first 4 bytes
of the disk. If the disk we are installing to used to have AIX on it,
then the first 4 bytes will still have IBMA in EBCDIC.

The install in question was debian etch. Im not sure what the best fix
is, perhaps the AIX detection code could check more than the first 4
bytes.

The whole partition info for primary partitions is in this block:

  dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be ))

All other data do not matter, beside the 0x55aa marker at the end of the
first block.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Get rid of "double zeroing" of allocated pages
Robert P. J. Day [Sat, 10 Feb 2007 09:45:46 +0000 (01:45 -0800)]
[PATCH] Get rid of "double zeroing" of allocated pages

Simplify the few instances where a call to "get_zeroed_page()" is closely
followed by an unnecessary call to memset() to clear that page.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: chas williams <chas@cmf.nrl.navy.mil>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] IPMI: Fix some RCU problems
Corey Minyard [Sat, 10 Feb 2007 09:45:45 +0000 (01:45 -0800)]
[PATCH] IPMI: Fix some RCU problems

Fix some RCU problem pointed out by Paul McKenney of IBM.  These are:

The wholesale move of the command receivers list into a new list was not
safe because the list will point to the new tail during a traversal, so the
traversal will never end on a reader if this happens during a read.

Memory barriers were needed to handle proper ordering of the setting of the
IPMI interface as valid.  Readers might not see proper ordering of data
otherwise.

In ipmi_smi_watcher_register(), the use of the _rcu suffix on the list is
unnecessary.

This require the list_splice_init_rcu() patch previously posted.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] add an RCU version of list splicing
Corey Minyard [Sat, 10 Feb 2007 09:45:42 +0000 (01:45 -0800)]
[PATCH] add an RCU version of list splicing

This patch is in support of the IPMI driver.  I have tested this with the
IPMI driver changes coming in the next patch.

Add a list_splice_init_rcu() function to splice an RCU-protected list into
another list.  This takes the sync function as an argument, so one would do
something like:

INIT_LIST_HEAD(&list);
list_splice_init_rcu(&source, &dest, synchronize_rcu);

The idea being to keep the RCU API proliferation down to a dull roar.

[akpm@osdl.org: build fix]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] fix sparse warnings from {asm,net}/checksum.h
Tilman Schmidt [Sat, 10 Feb 2007 09:45:41 +0000 (01:45 -0800)]
[PATCH] fix sparse warnings from {asm,net}/checksum.h

Rename the variable "sum" in the __range_ok macros to avoid name collisions
causing lots of "symbol shadows an earlier one" warnings by sparse.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] use cycle_t instead of u64 in struct time_interpolator
Helge Deller [Sat, 10 Feb 2007 09:45:40 +0000 (01:45 -0800)]
[PATCH] use cycle_t instead of u64 in struct time_interpolator

The 32bit and 64bit PARISC Linux kernels suffers from the problem, that the
gettimeofday() call sometimes returns non-monotonic times.

The easiest way to fix this, is to drop the PARISC-specific implementation
and switch over to the generic TIME_INTERPOLATION framework.

But in order to make it even compile on 32bit PARISC, the patch below which
touches the generic Linux code, is mandatory.

More information and the full patch with the parisc-specific changes is included in this thread: http://lists.parisc-linux.org/pipermail/parisc-linux/2006-December/031003.html

As far as I could see, this patch does not change anything for the existing
architectures which use this framework (IA64 and SPARC64), since "cycles_t"
is defined there as unsigned 64bit-integer anyway (which then makes this
patch a no-change for them).

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] remove invalidate_inode_pages()
Andrew Morton [Sat, 10 Feb 2007 09:45:39 +0000 (01:45 -0800)]
[PATCH] remove invalidate_inode_pages()

Convert all calls to invalidate_inode_pages() into open-coded calls to
invalidate_mapping_pages().

Leave the invalidate_inode_pages() wrapper in place for now, marked as
deprecated.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Export invalidate_mapping_pages() to modules
Anton Altaparmakov [Sat, 10 Feb 2007 09:45:38 +0000 (01:45 -0800)]
[PATCH] Export invalidate_mapping_pages() to modules

It makes no sense to me to export invalidate_inode_pages() and not
invalidate_mapping_pages() and I actually need invalidate_mapping_pages()
because of its range specification ability...

akpm: also remove the export of invalidate_inode_pages() by making it an
inlined wrapper.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] DocBook/HTML: correction of recursive A tags in HTML output
Pavel Pisa [Sat, 10 Feb 2007 09:45:37 +0000 (01:45 -0800)]
[PATCH] DocBook/HTML: correction of recursive A tags in HTML output

The malformed HTML was generated after switch to XSLTPROC
from SGML tools. The reference title

  <refentrytitle><phrase id="API-struct-x">struct x</phrase></refentrytitle>

is converted into two recursive <a> tags

  <a href="re02.html"><span><a id="API-struct-x"></a>struct x</span></a>

There is more possible solutions for this problem.
One can be found at

  http://darkk.livejournal.com/

The proposed solution is based on suggestion provided by Jiri Kosek.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] DocBook/HTML: Generate chapter/section level TOCs for functions
Pavel Pisa [Sat, 10 Feb 2007 09:45:36 +0000 (01:45 -0800)]
[PATCH] DocBook/HTML: Generate chapter/section level TOCs for functions

Simple increase of section TOC level generation significantly enhances
navigation experience through generated kernel API documentation.

This change restores back state from SGML tools time.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, pci probing
Jiri Slaby [Sat, 10 Feb 2007 09:45:36 +0000 (01:45 -0800)]
[PATCH] Char: moxa, pci probing

Alter the driver to use the pci probing.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, pci_probing prepare
Jiri Slaby [Sat, 10 Feb 2007 09:45:35 +0000 (01:45 -0800)]
[PATCH] Char: moxa, pci_probing prepare

- change pci conf prototype and rename it to moxa_pci_probe
- move some code to moxa_pci_probe
- create moxa_pci_remove

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, remove useless variables
Jiri Slaby [Sat, 10 Feb 2007 09:45:34 +0000 (01:45 -0800)]
[PATCH] Char: moxa, remove useless variables

Remove temporary or once used variables, that can be defined locally to
save some bytes.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, variables cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:33 +0000 (01:45 -0800)]
[PATCH] Char: moxa, variables cleanup

- rename moxaChannels to moxa_port
- rename moxa_str to moxa_ports
- move board global variables into moxa_board
- move port global variables into moxa_port

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, remove moxa_pci_devinfo
Jiri Slaby [Sat, 10 Feb 2007 09:45:33 +0000 (01:45 -0800)]
[PATCH] Char: moxa, remove moxa_pci_devinfo

Nothing is used from this struct but *pdev. Remove it and store only pdev.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, use del_timer_sync
Jiri Slaby [Sat, 10 Feb 2007 09:45:32 +0000 (01:45 -0800)]
[PATCH] Char: moxa, use del_timer_sync

Use del_timer_sync in most timer deletions, we don't want to oops in the timer
function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, macros cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:31 +0000 (01:45 -0800)]
[PATCH] Char: moxa, macros cleanup

Remove yet defined or unused macros and whitespace cleanup around the rest.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, eliminate typedefs
Jiri Slaby [Sat, 10 Feb 2007 09:45:30 +0000 (01:45 -0800)]
[PATCH] Char: moxa, eliminate typedefs

Do not use typedefs, use directly struct <something> instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, use PCI_DEVICE
Jiri Slaby [Sat, 10 Feb 2007 09:45:30 +0000 (01:45 -0800)]
[PATCH] Char: moxa, use PCI_DEVICE

Use PCI_DEVICE macro in pci_device_id list.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, devids cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:29 +0000 (01:45 -0800)]
[PATCH] Char: moxa, devids cleanup

Move them to pci_ids.h

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, remove unused functions
Jiri Slaby [Sat, 10 Feb 2007 09:45:28 +0000 (01:45 -0800)]
[PATCH] Char: moxa, remove unused functions

Remove ifdeffed functions and cleanup comments including too long license
terms.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, remove hangup bottomhalf
Jiri Slaby [Sat, 10 Feb 2007 09:45:28 +0000 (01:45 -0800)]
[PATCH] Char: moxa, remove hangup bottomhalf

Call tty_hangup directly, we do not need a bottomhalf for this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, timers cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:27 +0000 (01:45 -0800)]
[PATCH] Char: moxa, timers cleanup

Use kernel macros and functions for timer encapsulation -- do not access
fileds directly.  Also del_timer on inactive is legal, so that noting if it
runs is senseless, delete these variables.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, do not initialize global static
Jiri Slaby [Sat, 10 Feb 2007 09:45:26 +0000 (01:45 -0800)]
[PATCH] Char: moxa, do not initialize global static

Remove useless initialization of variables a) statically b) dynamically at
module_init c) dynamically after kzalloc (those with '= 0/NULL')

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: moxa, remove unused allocated page
Jiri Slaby [Sat, 10 Feb 2007 09:45:25 +0000 (01:45 -0800)]
[PATCH] Char: moxa, remove unused allocated page

moxaXmitBuff is almost unused -- only one byte from the whole PAGE_SIZE bytes
is used.  Do not alloc so much space for almost anything.  Also remove lock
protecting this page allocation.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Add TAINT_USER and ability to set taint flags from userspace
Theodore Ts'o [Sat, 10 Feb 2007 09:45:24 +0000 (01:45 -0800)]
[PATCH] Add TAINT_USER and ability to set taint flags from userspace

Allow taint flags to be set from userspace by writing to
/proc/sys/kernel/tainted, and add a new taint flag, TAINT_USER, to be used
when userspace has potentially done something dangerous that might
compromise the kernel.  This will allow support personnel to ask further
questions about what may have caused the user taint flag to have been set.

For example, they might examine the logs of the realtime JVM to see if the
Java program has used the really silly, stupid, dangerous, and
completely-non-portable direct access to physical memory feature which MUST
be implemented according to the Real-Time Specification for Java (RTSJ).
Sigh.  What were those silly people at Sun thinking?

[akpm@osdl.org: build fix]
[bunk@stusta.de: cleanup]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, fix sparse warning
Jiri Slaby [Sat, 10 Feb 2007 09:45:24 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, fix sparse warning

Feed NULL instead of 0 where pointer is expected.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <osv@javad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, lock count and flags
Jiri Slaby [Sat, 10 Feb 2007 09:45:23 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, lock count and flags

Both open count and INITIALIZED flag should be changed under lock.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <osv@javad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, do not null driver_data
Jiri Slaby [Sat, 10 Feb 2007 09:45:22 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, do not null driver_data

driver_data are initialzed to NULL from tty layer, no need to do it in the
driver.  In this case it cases oops, since driver_data may be NULL for a short
while for another closing process.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <osv@javad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, upgrade to 1.9.15
Jiri Slaby [Sat, 10 Feb 2007 09:45:21 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, upgrade to 1.9.15

- allow special rates
- break when bad status

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, do not put pdev
Jiri Slaby [Sat, 10 Feb 2007 09:45:21 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, do not put pdev

We don't call pci_dev_get, so do not call pci_dev_put in the pci release
function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, fix twice resource releasing
Jiri Slaby [Sat, 10 Feb 2007 09:45:20 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, fix twice resource releasing

Because brd->info is not NULLed, resources are released twice.  NULL it in
pci_remove function.  Also take care of retval and releasing in pci_probe --
mxser_initbrd alreasy releases resource, do not do it again in fail path in
probe function.

Cc: Sergei Organov <osv@javad.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, less loops in isr
Jiri Slaby [Sat, 10 Feb 2007 09:45:19 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, less loops in isr

Loop only 100^2 times, not 99999^2 times in isr (at most).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, header file cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:18 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, header file cleanup

- Remove no longer used macros
- Move some macros from the header to the code
- Remove c++ comments
- Align backslashes to one column

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, alter locking in isr
Jiri Slaby [Sat, 10 Feb 2007 09:45:18 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, alter locking in isr

Avoid oopsing when stress-testing open/close -- port->tty is NULL sometimes,
but is expected to be non-NULL, since dereferencing.  Receive/transmit chars
iff ASYNC_CLOSING is not set and ASYNC_INITIALIZED is set.  Thanks Sergei for
pointing this out and testing.

Cc: Sergei Organov <osv@javad.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Doc: isicom, remove reserved ioctl-number
Jiri Slaby [Sat, 10 Feb 2007 09:45:17 +0000 (01:45 -0800)]
[PATCH] Doc: isicom, remove reserved ioctl-number

Isicom driver no longer registers chardev with ioctl function.  It used to
use for firmware loading.  Remove the reserved letter (M) from
ioctl-number, so that the conflict get away.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, clean request_irq call
Jiri Slaby [Sat, 10 Feb 2007 09:45:16 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, clean request_irq call

We always set ASYNC_SHARE_IRQ, so do not test against this flag and request
shared irq directly.  Also remove nonsense comment.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, remove tty_wakeup bottomhalf
Jiri Slaby [Sat, 10 Feb 2007 09:45:15 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, remove tty_wakeup bottomhalf

It's safe to call tty_wakeup from irq context. Do not schedule it for later
calling.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser, obsolete old, nonexperimental new
Jiri Slaby [Sat, 10 Feb 2007 09:45:15 +0000 (01:45 -0800)]
[PATCH] Char: mxser, obsolete old, nonexperimental new

Mark v 1.x as obsolete and v 2.x as non-experimental in Kconfig.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, remove unused stuff
Jiri Slaby [Sat, 10 Feb 2007 09:45:14 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, remove unused stuff

- nobody waits on close_wait
- ASYNC_SPLIT_TERMIOS is not set by anybody, so do not test this flag
- process session and pgrp are useless information

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] PNP: export pnp_bus_type
David Brownell [Sat, 10 Feb 2007 09:45:13 +0000 (01:45 -0800)]
[PATCH] PNP: export pnp_bus_type

The PNP framework doesn't export "pnp_bus_type", which is an unfortunate
exception to the policy followed by pretty much every other bus.  I noticed
this when I had to find a device in order to provide its platform_data.

Note that per advice from Arjan, the "export" scope has been been minimized to
avoid the hundred-plus bytes needed to support access from modules.  In this
case, the symbol is only needed by statically linked kernel code that lives
outside the drivers/pnp directory.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] pktcdvd: cleanup
Thomas Maier [Sat, 10 Feb 2007 09:45:11 +0000 (01:45 -0800)]
[PATCH] pktcdvd: cleanup

- update documentation

- use clear_bdi_congested/set_bdi_congested functions directly instead of
  old wrappers

- removed DECLARE_BUF_AS_STRING macro

Signed-off-by: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Consolidate default sched_clock()
Alexey Dobriyan [Sat, 10 Feb 2007 09:45:10 +0000 (01:45 -0800)]
[PATCH] Consolidate default sched_clock()

Use attribute(weak).

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: n_r3964, cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:09 +0000 (01:45 -0800)]
[PATCH] Char: n_r3964, cleanup

- Lindent the code
- allow semicolons after macros by 'do {} while (0)'
- eliminate C++ comments

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: serial167, cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:45:08 +0000 (01:45 -0800)]
[PATCH] Char: serial167, cleanup

serial167, cleanup

- Lindent the code
- remove 3 pointers from paranoia_check

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, remove useless spinlock
Jiri Slaby [Sat, 10 Feb 2007 09:45:08 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, remove useless spinlock

gm_lock is useless, since ISA is configured at init time and there it's
serialized.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: mxser_new, mark init functions
Jiri Slaby [Sat, 10 Feb 2007 09:45:07 +0000 (01:45 -0800)]
[PATCH] Char: mxser_new, mark init functions

Mark some funcions with __init and __devinit.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] ext2: skip pages past number of blocks in ext2_find_entry
Eric Sandeen [Sat, 10 Feb 2007 09:45:06 +0000 (01:45 -0800)]
[PATCH] ext2: skip pages past number of blocks in ext2_find_entry

This one was pointed out on the MOKB site:
http://kernelfun.blogspot.com/2006/11/mokb-09-11-2006-linux-26x-ext2checkpage.html

If a directory's i_size is corrupted, ext2_find_entry() will keep
processing pages until the i_size is reached, even if there are no more
blocks associated with the directory inode.  This patch puts in some
minimal sanity-checking so that we don't keep checking pages (and issuing
errors) if we know there can be no more data to read, based on the block
count of the directory inode.

This is somewhat similar in approach to the ext3 patch I sent earlier this
year.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Relay: add CPU hotplug support
Mathieu Desnoyers [Sat, 10 Feb 2007 09:45:05 +0000 (01:45 -0800)]
[PATCH] Relay: add CPU hotplug support

Mathieu originally needed to add this for tracing Xen, but it's something
that's needed for any application that can be tracing while cpus are added.

unplug isn't supported by this patch.  The thought was that at minumum a new
buffer needs to be added when a cpu comes up, but it wasn't worth the effort
to remove buffers on cpu down since they'd be freed soon anyway when the
channel was closed.

[zanussi@us.ibm.com: avoid lock_cpu_hotplug deadlock]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] serial: serial_txx9 driver update
Atsushi Nemoto [Sat, 10 Feb 2007 09:45:05 +0000 (01:45 -0800)]
[PATCH] serial: serial_txx9 driver update

Update the serial_txx9 driver.

 * Configurable manumum port number. (SERIAL_TXX9_NR_UARTS)
 * Remove some code which is unneeded if CONFIG_PM=n.
 * Use PCI_DEVICE() for pci device id table and make it const.
 * Do not include <asm/irq.h>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().
Robert P. J. Day [Sat, 10 Feb 2007 09:45:03 +0000 (01:45 -0800)]
[PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().

Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] drivers/char/vc_screen.c: proper prototypes
Adrian Bunk [Sat, 10 Feb 2007 09:45:02 +0000 (01:45 -0800)]
[PATCH] drivers/char/vc_screen.c: proper prototypes

Add proper prototypes for two functions in drivers/char/vc_screen.c

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] scrub non-__GLIBC__ checks in linux/socket.h and linux/stat.h
Mike Frysinger [Sat, 10 Feb 2007 09:45:01 +0000 (01:45 -0800)]
[PATCH] scrub non-__GLIBC__ checks in linux/socket.h and linux/stat.h

Userspace should be worrying about userspace, so having the socket.h
and stat.h pollute the namespace in the non-glibc case is wrong and
pretty much prevents any other libc from utilizing these headers
sanely unless they set up the __GLIBC__ define themselves (which
sucks)

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] consolidate line discipline number definitions
Tilman Schmidt [Sat, 10 Feb 2007 09:45:00 +0000 (01:45 -0800)]
[PATCH] consolidate line discipline number definitions

The line discipline numbers N_* are currently defined for each architecture
individually, but (except for a seeming mistake) identically, in
asm/termios.h.  There is no obvious reason why these numbers should be
architecture specific, nor any apparent relationship with the termios
structure.  The total number of these, NR_LDISCS, is defined in linux/tty.h
anyway.  So I propose the following patch which moves the definitions of
the individual line disciplines to linux/tty.h too.

Three of these numbers (N_MASC, N_PROFIBUS_FDL, and N_SMSBLOCK) are unused
in the current kernel, but the patch still keeps the complete set in case
there are plans to use them yet.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] igrab() should check for I_CLEAR
Jan Blunck [Sat, 10 Feb 2007 09:44:59 +0000 (01:44 -0800)]
[PATCH] igrab() should check for I_CLEAR

When igrab() is calling __iget() on an inode it should check if
clear_inode() has been called on the inode already.  Otherwise there is a
race window between clear_inode() and destroy_inode() where igrab() calls
__iget() which leads to already free inodes on the inode lists.

Signed-off-by: Vandana Rungta <vandana@novell.com>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] lockdep: add graph depth information to /proc/lockdep
Jason Baron [Sat, 10 Feb 2007 09:44:59 +0000 (01:44 -0800)]
[PATCH] lockdep: add graph depth information to /proc/lockdep

Generate locking graph information into /proc/lockdep, for lock hierarchy
documentation and visualization purposes.

sample output:

 c089fd5c OPS:     138 FD:   14 BD:    1 --..: &tty->termios_mutex
  -> [c07a3430] tty_ldisc_lock
  -> [c07a37f0] &port_lock_key
  -> [c07afdc0] &rq->rq_lock_key#2

The lock classes listed are all the first-hop lock dependencies that
lockdep has seen so far.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] lockdep: more unlock-on-error fixes
Jarek Poplawski [Sat, 10 Feb 2007 09:44:58 +0000 (01:44 -0800)]
[PATCH] lockdep: more unlock-on-error fixes

- returns after DEBUG_LOCKS_WARN_ON added in 3 places

- debug_locks checking after lookup_chain_cache() added in
  __lock_acquire()

- locking for testing and changing global variable max_lockdep_depth
  added in __lock_acquire()

From: Ingo Molnar <mingo@elte.hu>

My __acquire_lock() cleanup introduced a locking bug: on SMP systems we'd
release a non-owned graph lock.  Fix this by moving the graph unlock back,
and by leaving the max_lockdep_depth variable update possibly racy.  (we
dont care, it's just statistics)

Also add some minimal debugging code to graph_unlock()/graph_lock(),
which caught this locking bug.

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] lockdep: also check for freed locks in kmem_cache_free()
Ingo Molnar [Sat, 10 Feb 2007 09:44:57 +0000 (01:44 -0800)]
[PATCH] lockdep: also check for freed locks in kmem_cache_free()

kmem_cache_free() was missing the check for freeing held locks.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] kill_pid_info: kill acquired_tasklist_lock
Oleg Nesterov [Sat, 10 Feb 2007 09:44:56 +0000 (01:44 -0800)]
[PATCH] kill_pid_info: kill acquired_tasklist_lock

Kill acquired_tasklist_lock, sig_needs_tasklist() is very cheap nowadays.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: tty_wakeup cleanup
Jiri Slaby [Sat, 10 Feb 2007 09:44:55 +0000 (01:44 -0800)]
[PATCH] Char: tty_wakeup cleanup

tty_wakeup cleanup

- remove wake_up_interruptible(&tty->write_wait) surrounding
  tty_wakup(tty);
- substitute tty->ldisc.write_wakeup(tty) + wake_up() by tty_wakeup(tty);

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, correct probing/removing
Jiri Slaby [Sat, 10 Feb 2007 09:44:55 +0000 (01:44 -0800)]
[PATCH] Char: isicom, correct probing/removing

Don't forget to decrease card_count in fail paths and in remove function.
Also null board->base in such cases to point out, that this structure is
unused and thus can be reassigned.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, support higher rates
Jiri Slaby [Sat, 10 Feb 2007 09:44:54 +0000 (01:44 -0800)]
[PATCH] Char: isicom, support higher rates

Add support for higher baud rates (coming from original isi driver).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, check card state in isr
Jiri Slaby [Sat, 10 Feb 2007 09:44:53 +0000 (01:44 -0800)]
[PATCH] Char: isicom, check card state in isr

Check if the card really interrupted us by reading its IO space and eventualy
return IRQ_NONE.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, augment card_reset
Jiri Slaby [Sat, 10 Feb 2007 09:44:52 +0000 (01:44 -0800)]
[PATCH] Char: isicom, augment card_reset

isicom, augment card_reset

- add 0xee to signatures
- change long delays to sleeps
- make one sleep shorter not to wait 3s
- portcount == 16 is also correct

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, fix locking in isr
Jiri Slaby [Sat, 10 Feb 2007 09:44:52 +0000 (01:44 -0800)]
[PATCH] Char: isicom, fix locking in isr

2 spin_unlocks are omitted in the interrupt handler.  Put them there to fix up
deadlocking on UP.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] make drivers/char/mxser_new.c:mxser_hangup() static
Adrian Bunk [Sat, 10 Feb 2007 09:44:51 +0000 (01:44 -0800)]
[PATCH] make drivers/char/mxser_new.c:mxser_hangup() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] mxser: remove ambiguous redefinition of INIT_WORK
Andreas Jaggi [Sat, 10 Feb 2007 09:44:50 +0000 (01:44 -0800)]
[PATCH] mxser: remove ambiguous redefinition of INIT_WORK

Removes an unused and ambiguous redefinition of INIT_WORK()

Signed-off-by: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] avoid one conditional branch in touch_atime()
Eric Dumazet [Sat, 10 Feb 2007 09:44:49 +0000 (01:44 -0800)]
[PATCH] avoid one conditional branch in touch_atime()

I added IS_NOATIME(inode) macro definition in include/linux/fs.h, true if
the inode superblock is marked readonly or noatime.

This new macro is then used in touch_atime() instead of separatly testing
MS_RDONLY and MS_NOATIME

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] struct vfsmount: keep mnt_count & mnt_expiry_mark away from mnt_flags
Eric Dumazet [Sat, 10 Feb 2007 09:44:48 +0000 (01:44 -0800)]
[PATCH] struct vfsmount: keep mnt_count & mnt_expiry_mark away from mnt_flags

I noticed cache misses in touch_atime() that can be avoided if we keep
mnt_count & mnt_expiry_mark in a different cache line than mnt_flags
(mostly read)

mnt_count & mnt_expiry_mark are modified each time a file is opened/closed
in a file system.

touch_atime() is called each time a file is read, and generally needs to
read mnt_flags.

Other fields of struct vfsmount are mostly read so I chose to move
mnt_count & mnt_expiry_mark at the end of struct vfsmount.  And adding a
comment so that nobody tries to re-arrange fields to fill the holes :)

On 64bits platforms, the new offsetof(mnt_count) is 0xC0
On 32bits platforms, it is 0x60, so I didnot add a
____cacheline_aligned_in_smp because it would have a too big impact on the
size of this object (in particular if CONFIG_X86_L1_CACHE_SHIFT=7)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: isicom, remove tty_{hang,wake}up bottomhalves
Jiri Slaby [Sat, 10 Feb 2007 09:44:47 +0000 (01:44 -0800)]
[PATCH] Char: isicom, remove tty_{hang,wake}up bottomhalves

- tty_hangup() itself schedules work, so there is no need to schedule hangup
  in the driver

- tty_wakeup(): it's safe to call it while in atomic, so that its
  schedule_work might be also wiped out

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] IOC3/IOC4: PCI mem space resources
Brent Casavant [Sat, 10 Feb 2007 09:44:46 +0000 (01:44 -0800)]
[PATCH] IOC3/IOC4: PCI mem space resources

The SGI IOC3 and IOC4 PCI devices implement memory space apertures, not I/O
space apertures.  Use the appropriate region management functions.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Stanislaw Skowronek <skylark@linux-mips.org>
Cc: Brent Casavant <bcasavan@sgi.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] usr/gen_init_cpio.c: support for hard links
Luciano Rocha [Sat, 10 Feb 2007 09:44:45 +0000 (01:44 -0800)]
[PATCH] usr/gen_init_cpio.c: support for hard links

Extend usr/gen_init_cpio.c "file" entry, adding support for hard links.

Previous format:
file <name> <location> <mode> <uid> <gid>

New format:
file <name> <location> <mode> <uid> <gid> [<hard links>]

The hard links specification is optional, keeping the previous
behaviour.

All hard links are defined sequentially in the resulting cpio and the
file data is present only in the last link. This is the behaviour of
GNU's cpio and is supported by the kernel initramfs extractor.

Signed-off-by: Luciano Rocha <strange@nsk.no-ip.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] disable init/initramfs.c: architectures
Jean-Paul Saman [Sat, 10 Feb 2007 09:44:44 +0000 (01:44 -0800)]
[PATCH] disable init/initramfs.c: architectures

Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs
when CONFIG_BLK_DEV_INITRAMFS is not selected.  This saves another 4 kbytes
on most platfoms (some reserve PAGE_SIZE for initramfs).

Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] disable init/initramfs.c
Jean-Paul Saman [Sat, 10 Feb 2007 09:44:43 +0000 (01:44 -0800)]
[PATCH] disable init/initramfs.c

The file init/initramfs.c is always compiled and linked in the kernel
vmlinux even when BLK_DEV_RAM and BLK_DEV_INITRD are disabled and the
system isn't using any form of an initramfs or initrd.  In this situation
the code is only used to unpack a (static) default initial rootfilesystem.
The current init/initramfs.c code.  usr/initramfs_data.o compiles to a size
of ~15 kbytes.  Disabling BLK_DEV_RAM and BLK_DEV_INTRD shrinks the kernel
code size with ~60 Kbytes.

This patch avoids compiling in the code and data for initramfs support if
CONFIG_BLK_DEV_INITRD is not defined.  Instead of the initramfs code and
data it uses a small routine in init/noinitramfs.c to setup an initial
static default environment for mounting a rootfilesystem later on in the
kernel initialisation process.  The new code is: 164 bytes of size.

The patch is separated in two parts:
1) doesn't compile initramfs code when CONFIG_BLK_DEV_INITRD is not set
2) changing all plaforms vmlinux.lds.S files to not reserve an area of
PAGE_SIZE when CONFIG_BLK_DEV_INITRD is not set.

[deweerdt@free.fr: warning fix]
Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[PATCH] Char: tty, delete wake_up_interruptible after tty_wakeup
Jiri Slaby [Sat, 10 Feb 2007 09:44:42 +0000 (01:44 -0800)]
[PATCH] Char: tty, delete wake_up_interruptible after tty_wakeup

tty_wakeup calls wake_up_interruptible(&tty->write_wait) itself, it's not
needed to wake up again after tty_wakeup returns.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>