[MIPS] DBAu1200: fix bad SMC 91C111 resource size

The on-board SMC 91C111 chip only decodes 16 bytes of memory (obviously, it
can not decode a whole megabyte starting from address 0x19000300).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532

The platform is actually named routerboard 532 so let's call it this.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jeff@garzik.org>

[MIPS] IP27: Fix build bug due to missing include

asm-mips/mach-ip27/topology.h must #include <asm-generic/topology.h>
This fixes the following compile error:

...
  CC      kernel/sched.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'find_next_best_node':
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: implicit declaration of function 'node_to_cpumask_ptr'
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: '__tmp__' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'sched_domain_node_span':
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7047: error: 'nodemask' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7048: warning: ISO C90 forbids mixed declarations and code
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7059: error: implicit declaration of function 'node_to_cpumask_ptr_next'
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function '__build_sched_domains':
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7605: error: 'pnodemask' undeclared (first use in this function)
make[2]: *** [kernel/sched.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Fix some sparse warnings on traps.c and irq-msc01.c

* Declare board_bind_eic_interrupt, board_watchpoint_handler in traps.h
* Make msc_bind_eic_interrupt static and fix its argument types.
* Make msc_levelirq_type, msc_edgeirq_type static.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] cevt-gt641xx: Kill unnecessary include

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] DS1287: Add clockevent driver

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] add DECstation I/O ASIC clocksource

Add DECstation I/O ASIC clocksource

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] rbtx4938: minor cleanup

Do not initialize res->parent for platform device.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] rbtx4938: misc cleanups

* Do not use non-standard I/O accessors, such as reg_rd08, etc.
* Kill unnecessary wbflush()
* Kill tx4938_mips.h
* Kill unnecessary includes

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] jmr3927: use generic txx9 gpio

Use generic txx9 gpio (and gpiolib) for JMR3927 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] rbhma4500: use generic txx9 gpio

Use generic txx9 gpio (and gpiolib) for RBHMA4500 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] generic txx9 gpio support

This is a board-independent TXx9 gpio API implementation using gpiolib.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make fallback gpio.h gpiolib-friendly

If gpiolib was selected, asm-generic/gpio.h provides some prototypes
for gpio API and implementation helpers.  With this patch, platform
code can implement its GPIO API using gpiolib without custom gpio.h
file.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] unexport null_perf_irq() and make it static

This patch unexports the null_perf_irq() symbol, and simultaneously
makes this function static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] unexport rtc_mips_set_time()

No users for the rtc_mips_set_time() routine exist outside of the
core kernel code. Therefore, EXPORT_SYMBOL(rtc_mips_set_time) is
useless, and this patch removes it.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] unexport copy_from_user_page()

No users for the copy_from_user_page() routine exist outside of the
core kernel code. Therefore, EXPORT_SYMBOL(copy_from_user_page) is
useless, and this patch removes it.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] unexport copy_to_user_page()

The copy_to_user_page() function is called only in the core kernel
code. Therefore, there is no need to export it. This patch removes
EXPORT_SYMBOL(copy_to_user_page).

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] unexport copy_user_highpage()

The copy_user_highpage() routine has no users outside of the
core kernel code, so exporting this symbol is pointless.
This patch removes EXPORT_SYMBOL(copy_user_highpage).

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: move UART platform code to its proper place

Move the code registering the Alchemy UART platform devices from
drivers/serial/ to its proper place, into the Alchemy platform code.  Fix
the related Kconfig entry, while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: kill useless #include's, #define's and extern's

Go thru the Alchemy code and hunt down every unneeded #include, #define, and
extern (some of which refer to already long dead functions).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] malta_int.c: make 4 variables static

The following variables defined in arch/mips/mips-boards/malta/malta_int.c
can become static: msc_irqmap[], msc_nr_irqs, msc_eicirqmap[], and
msc_nr_eicirqs. This patch makes them static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make standard_io_resources[] static

The array standard_io_resources[] needs not to be exposed in the kernel
global namespace. This patch makes it static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make plat_perf_setup() static

There is no need for the plat_perf_setup() function to be global,
so make it static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make mdesc and prom_getmdesc() static

Neither the mdesc[] array nor the prom_getmdesc() function need to
be global. This patch makes them static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make mips_ejtag_setup() static

This change makes the needlessly global function mips_ejtag_setup() static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] make mips_nmi_setup() static

This change makes the needlessly global function mips_nmi_setup() static.

Successfully build-tested using default configs for Malta, Atlas
and SEAD boards.

Runtime test successfully performed by booting the Malta 4Kc board
up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] remove redundant display of free swap space in show_mem()

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: kill useless time variables

Since the commit 91a2fcc88634663e9e13dcdfad0e4a860e64aeee ([MIPS]
Consolidate all variants of MIPS cp0 timer interrupt handlers) removed the
Alchemy specific timer handler, 'r4k_offset' and 'r4k_cur' variables became
practically useless, so get rid of them at last, renaming cal_r4off()
function into calc_clock() and making it return CPU frequency. Also, make
'no_au1xxx_32khz' variable static...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: don't unmask timer IRQ early

Defer the unmasking of the count/compare interrupt (IRQ5) till the
clockevent driver initialization:

- only enable the cascaded IRQs 0 thru 4 in arch_init_irq(); kill the
  ALLINTS macro -- this change is blessed by AMD as I saw it in their own
  patch; :-)

- do not force IRQ5 enabled in plat_time_init() if PM is enabled and there's
  no 32 KHz crystal.

Update the copyrights (taking into account my prior changes), also removing
Pete Popov's old email...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Move arch/mips/philips to arch/mips/nxp

Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] replace __inline with inline

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Add support for MIPS CMP platform.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Add CoreFPGA5 support; distinguish between SOCit/ROCit

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Add noulri kernel argument to disable "rdhwr $29" usermode support.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Allow setting of the cache attribute at run time.

Slightly tacky, but there is a precedent in the sparc archirecture code.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Tidy up cache attributes

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] All MIPS32 processors support64-bit physical addresses.

Still, only the 4K may actually implement it.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Remove TLB sanitation code

It is not being used by Malta and shouldn't be needed for MIPSsim.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Basic SPRAM support

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Reimplement clear_page/copy_page

Fold the SB-1 specific implementation of clear_page/copy_page in the
generic version, and rewrite that one in tlbex style. The immediate
benefits:
  - It converts the compile-time workaround for SB-1 pass 1 prefetches
    to a more efficient run-time check.
  - It allows adjustment of loop unfolling, which helps to reduce the
    number of redundant cdex cache ops.
  - It fixes some esoteric cornercases (the cache line length calculations
    can go wrong, and support for 64k pages without prefetch instructions
    will overflow the addiu immediate).
  - Somewhat better guesses of "good" prefetch values.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
  [SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug
  [SCSI] aic7xxx: add const
  [SCSI] aic7xxx: add static
  [SCSI] aic7xxx: Update _shipped files
  [SCSI] aic7xxx: teach aicasm to not emit unused debug code/data
  [SCSI] qla2xxx: Update version number to 8.02.01-k2.
  [SCSI] qla2xxx: Correct regression in relogin code.
  [SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
  [SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static
  [SCSI] qla2xxx: qla_os.c, make 2 functions static
  [SCSI] qla2xxx: Re-register FDMI information after a LIP.
  [SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.
  [SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.
  [SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests.
  [SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump.
  [SCSI] m68k: new mac_esp scsi driver
  [SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs
  [SCSI] zfcp: Print some messages only during ERP
  [SCSI] zfcp: Wait for free SBAL during exchange config
  [SCSI] scsi_transport_fc: fc_user_scan correction
  ...

[SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug

Since

commit 43cc71eed1250755986da4c0f9898f9a635cb3bf
Author: Kay Sievers <kay.sievers@vrfy.org>
Date:   Sat Aug 18 04:40:39 2007 +0200

    platform: prefix MODALIAS with "platform:"

the platform modalias is prefixed with "platform:". Add MODULE_ALIAS()
to the hotpluggable SCSI platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
[akpm@linux-foundation.org: fix sgiwd93.c]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aic7xxx: add const

This patch adds more const keywords where appropriate.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aic7xxx: add static

This patch adds static (and sometimes const) keywords where appropriate.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aic7xxx: Update _shipped files

Update the precompiled sequencer code to match the latest
aicasm changes.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aic7xxx: teach aicasm to not emit unused debug code/data

Add a 'count' variable to each symbol which gets increased every time
the symbol is referenced.  And then modify the register definition to
include counts for symbols which are referenced from the source code
only and not from the sequencer code.

This will give us an automatic usage count for the symbols with only
minimal hand-crafting.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Update version number to 8.02.01-k2.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Correct regression in relogin code.

Commit 63a8651f2548c6bb5132c0b4e7dad4f57a9274db ([SCSI] qla2xxx:
Correct infinite-login-retry issue.) introduced a small
regression where a successful relogin would result in an fcport's
loop_id to be incorrectly reset to FC_NO_LOOP_ID.  Only clear-out
loopid, if retries have been 'truly' exhausted.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.

There were several places in the driver which could cause byte
ordering problem as provided by Al Viro
<viro@ZenIV.linux.org.uk>.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static

This patch makes the needlessly global qla2x00_issue_iocb_timeout()
static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: qla_os.c, make 2 functions static

This patch makes the following needlessly global functions static:
- qla2x00_alloc_work()
- qla2x00_post_work()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Re-register FDMI information after a LIP.

Original code would (incorrectly) only re-register after a
loop-down condition.  Also, FDMI registration should be enabled
by default.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.

The driver is incorrectly assuming that the 'sp' reference held
in qla2[x00|4xx]_abort_command() is valid after the mailbox
command is issued to abort the exchange.  It is *not*, as the
command may be completed during interrupt context before control
is returned to the mailbox caller.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.

Earlier code could trigger an infinite-retry if 1st invocation
returned a non-CS_COMPLETE status.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump.

Use the more efficient read-DMA'ble-buffer mailbox commands
rather than reading a single word/dword at a time.  We also
remove a bulk of the duplicate mailbox command-handling codes in
favor of more generic read-memory() routines (qla2xxx_dump_ram()
and qla24xx_dump_ram()).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] m68k: new mac_esp scsi driver

Replace the mac_esp driver with a new one based on the esp_scsi core.

For esp_scsi: add support for sync transfers for the PIO mode, add a new
esp_driver_ops method to get the maximum dma transfer size (like the old
NCR53C9x driver), and some cleanups.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs

The new FCP adapter statistics provide a variety of information about
the virtual adapter (subchannel). In order to collect this information
the zfcp driver is extended to query this information.

The information provided by the new FCP adapter statistics can be
fetched by reading from the following files in the sysfs filesystem

/sys/class/scsi_host/host<n>/seconds_active
/sys/class/scsi_host/host<n>/requests
/sys/class/scsi_host/host<n>/megabytes
/sys/class/scsi_host/host<n>/utilization

These are the statistics on a virtual adapter (subchannel) level.

The information provided is raw and not modified or interpreted by any
means.  No interpretation or modification of the values is done by the
zfcp driver.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] zfcp: Print some messages only during ERP

When statistics are polled from sysfs, the statistics use the same
commands as the adapter initialization. Change the messages printed
here, so they are only printed during initialization and not for each
poll of adapter data.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] zfcp: Wait for free SBAL during exchange config

When sending a exchange config data command, wait for a free SBAL.
This does not matter during adapter initialization, but this is
required for pulling adapter statistics during high I/O load.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] scsi_transport_fc: fc_user_scan correction

Way back when, when the fc_user_scan routine was created, it kept some
of its original logic that walked the rport list and kicked off a scan.
Unfortunately, it didn't keep any of the locking around the rport list,
nor did it consider the synchronous nature of the scan invoked. The result,
there are some scan requests where the rport list changes, thus a subsequent
scan is called on a bogus rport structure and the system NMI's.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aha1542: minor irq handler cleanups

- where the 'irq' function argument is known never to be used, rename
  it to 'dummy' to make this more obvious

- replace per-irq lookup functions and tables with a direct reference
  to data object obtained via 'dev_id' function argument, passed from
  request_irq()

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] scsi_transport_spi: include sysfs.h

scsi_transport_spi.c needs to #include <linux/sysfs.h>:

next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group'
make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] FlashPoint: fix off-by-one errors

This patch fixes off-by-one errors in error checks (the variables are
used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN
elements) spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] aic7xxx: Update type check in aicasm grammar

The function type_check() in aicasm grammar code was
never used properly due to a bug.
This patch fixes it up and ensures it's only called if appropriate.

In addition the unused 16bit instruction are disabled, but left in
the code for reference.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

[SCSI] fix SLUB WARN_ON

We're getting a WARN_ON from SLUB indicating that we're trying to free
caches with in-use objects.  The root cause is a new dependency in the
command/sense free on unchecked_isa_dma.  The WARN_ON is caused by
drivers which change this in their setup after the command/sense cache
is allocated.

The fix is to move the allocation of this cache into scsi_add_host()
so things like gdth have an opportunity to modify it between alloc and
add (but *not* after).

The true fix would be to move unchecked_isa_dma into the template and
out of the host, so it because a truly read only variable.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

Merge branch 'kvm-updates-2.6.26' of git://git./linux/kernel/git/avi/kvm

* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (147 commits)
  KVM: kill file->f_count abuse in kvm
  KVM: MMU: kvm_pv_mmu_op should not take mmap_sem
  KVM: SVM: remove selective CR0 comment
  KVM: SVM: remove now obsolete FIXME comment
  KVM: SVM: disable CR8 intercept when tpr is not masking interrupts
  KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled
  KVM: export kvm_lapic_set_tpr() to modules
  KVM: SVM: sync TPR value to V_TPR field in the VMCB
  KVM: ppc: PowerPC 440 KVM implementation
  KVM: Add MAINTAINERS entry for PowerPC KVM
  KVM: ppc: Add DCR access information to struct kvm_run
  ppc: Export tlb_44x_hwater for KVM
  KVM: Rename debugfs_dir to kvm_debugfs_dir
  KVM: x86 emulator: fix lea to really get the effective address
  KVM: x86 emulator: fix smsw and lmsw with a memory operand
  KVM: x86 emulator: initialize src.val and dst.val for register operands
  KVM: SVM: force a new asid when initializing the vmcb
  KVM: fix kvm_vcpu_kick vs __vcpu_run race
  KVM: add ioctls to save/store mpstate
  KVM: Rename VCPU_MP_STATE_* to KVM_MP_STATE_*
  ...

Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (49 commits)
  ide-tape: remove tape->merge_stage
  ide-tape: mv tape->merge_stage_size tape->merge_bh_size
  ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer
  ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer
  ide-tape: make __idetape_discard_read_pipeline() of type void
  ide: remove now unused ide_pci_create_host_proc()
  ide: remove /proc/ide/ali
  ide-tape: improve buffer pages freeing strategy
  ide-tape: mv tape->pages_per_stage tape->pages_per_buffer
  ide-tape: mv tape->stage_size tape->buffer_size
  ide-tape: improve buffer allocation strategy
  ide: add struct ide_io_ports (take 3)
  ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2)
  ide: sanitize ide_unregister() usage
  mpc8xx-ide: use ide_find_port()
  ide: add "noacpi" / "acpigtf" / "acpionboot" parameters
  gayle: add "doubler" parameter
  ide: add "cdrom=" and "chs=" parameters
  ide: add "nodma|noflush|noprobe|nowerr=" parameters
  ide: remove obsoleted "hdx=autotune" kernel parameter
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/x86/linux-2.6-idle-fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fix:
  fix idle (arch, acpi and apm) and lockdep

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix build failure

Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Add helper to move QP to ready-to-send
  mlx4_core: Add HW queues allocation helpers
  RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbase
  mlx4_core: CQ resizing should pass a 0 opcode modifier to MODIFY_CQ
  mlx4_core: Move kernel doorbell management into core
  IB/ehca: Bump version number to 0026
  IB/ehca: Make some module parameters bool, update descriptions
  IB/ehca: Remove mr_largepage parameter
  IB/ehca: Move high-volume debug output to higher debug levels
  IB/ehca: Prevent posting of SQ WQEs if QP not in RTS
  IPoIB: Handle 4K IB MTU for UD (datagram) mode
  RDMA/nes: Fix adapter reset after PXE boot
  RDMA/nes: Print IPv4 addresses in a readable format
  RDMA/nes: Use print_mac() to format ethernet addresses for printing

asm/unaligned.h doesn't work well as the very first include

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

e1000e triggers sparc32 gcc bug

... and isn't possible on sparc32 boxen anyway, unless somebody
had done JavaStation with PCIE lately.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM: kill file->f_count abuse in kvm

Use kvm own refcounting instead of playing with ->filp->f_count.
That will allow to get rid of a lot of crap in anon_inode_getfd() and
kill a race in kvm_dev_ioctl_create_vm() (file might have been closed
immediately by another thread, so ->filp might point to already freed
struct file when we get around to setting it).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: MMU: kvm_pv_mmu_op should not take mmap_sem

kvm_pv_mmu_op should not take mmap_sem. All gfn_to_page() callers down
in the MMU processing will take it if necessary, so as it is it can
deadlock.

Apparently a leftover from the days before slots_lock.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: remove selective CR0 comment

There is not selective cr0 intercept bug. The code in the comment sets the
CR0.PG bit. But KVM sets the CR4.PG bit for SVM always to implement the paged
real mode. So the 'mov %eax,%cr0' instruction does not change the CR0.PG bit.
Selective CR0 intercepts only occur when a bit is actually changed. So its the
right behavior that there is no intercept on this instruction.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: remove now obsolete FIXME comment

With the usage of the V_TPR field this comment is now obsolete.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: disable CR8 intercept when tpr is not masking interrupts

This patch disables the intercept of CR8 writes if the TPR is not masking
interrupts. This reduces the total number CR8 intercepts to below 1 percent of
what we have without this patch using Windows 64 bit guests.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled

If the CR8 write intercept is disabled the V_TPR field of the VMCB needs to be
synced with the TPR field in the local apic.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: export kvm_lapic_set_tpr() to modules

This patch exports the kvm_lapic_set_tpr() function from the lapic code to
modules. It is required in the kvm-amd module to optimize CR8 intercepts.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: sync TPR value to V_TPR field in the VMCB

This patch adds syncing of the lapic.tpr field to the V_TPR field of the VMCB.
With this change we can safely remove the CR8 read intercept.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: ppc: PowerPC 440 KVM implementation

This functionality is definitely experimental, but is capable of running
unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only
tested with 440EP "Bamboo" guests so far, but with appropriate userspace
support other SoC/board combinations should work.)

See Documentation/powerpc/kvm_440.txt for technical details.

[stephen: build fix]

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: Add MAINTAINERS entry for PowerPC KVM

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: ppc: Add DCR access information to struct kvm_run

Device Control Registers are essentially another address space found on PowerPC
4xx processors, analogous to PIO on x86. DCRs are always 32 bits, and can be
identified by a 32-bit number. We forward most DCR accesses to userspace for
emulation (with the exception of CPR0 registers, which can be read directly
for simplicity in timebase frequency determination).

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

ppc: Export tlb_44x_hwater for KVM

PowerPC 440 KVM needs to know how many TLB entries are used for the host kernel
linear mapping (it does not modify these mappings when switching between guest
and host execution).

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: Rename debugfs_dir to kvm_debugfs_dir

It's a globally exported symbol now.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: x86 emulator: fix lea to really get the effective address

We never hit this, since there is currently no reason to emulate lea.

Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: x86 emulator: fix smsw and lmsw with a memory operand

lmsw and smsw were implemented only with a register operand.  Extend them
to support a memory operand as well.  Fixes Windows running some display
compatibility test on AMD hosts.

Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: x86 emulator: initialize src.val and dst.val for register operands

This lets us treat the case where mod == 3 in the same manner as other cases.

Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: SVM: force a new asid when initializing the vmcb

Shutdown interception clears the vmcb, leaving the asid at zero (which is
illegal.  so force a new asid on vmcb initialization.

Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: fix kvm_vcpu_kick vs __vcpu_run race

There is a window open between testing of pending IRQ's
and assignment of guest_mode in __vcpu_run.

Injection of IRQ's can race with __vcpu_run as follows:

CPU0                                CPU1
kvm_x86_ops->run()
vcpu->guest_mode = 0                SET_IRQ_LINE ioctl
..
kvm_x86_ops->inject_pending_irq
kvm_cpu_has_interrupt()

                                    apic_test_and_set_irr()
                                    kvm_vcpu_kick
                                    if (vcpu->guest_mode)
                                        send_ipi()

vcpu->guest_mode = 1

So move guest_mode=1 assignment before ->inject_pending_irq, and make
sure that it won't reorder after it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM: add ioctls to save/store mpstate

So userspace can save/restore the mpstate during migration.

[avi: export the #define constants describing the value]
[christian: add s390 stubs]
[avi: ditto for ia64]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

[SCSI] esp_scsi: Make cur_residue and tot_residue signed.

Many of the overflow checks test whether the value has
gone negative, and we want to retain such checks.

Reported by Julia Lawall.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

ide-tape: remove tape->merge_stage

Get rid of the pipeline merge stage but retain the chrdev req caching
functionality by using a merge buffer tape->merge_bh which is flushed in chunks
of several blocks at a time. Also, remove last references to pipelining, e.g.
typedef idetape_stage_s.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: mv tape->merge_stage_size tape->merge_bh_size

This is the size of the merge buffer.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer

Also, rename its __-low level helper too.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: make __idetape_discard_read_pipeline() of type void

It always returns 0 which has no effect on tape positioning calculation so
simplify it by converting its type to void, bringing no functional change to the
driver.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>