[POWERPC] spufs: Fix race condition on gang->aff_ref_spu

Affinity reference point location (gang->aff_ref_spu) is reset
when the whole gang is descheduled. However, the last member of
a gang can be descheduled while we are trying to schedule another
member of the gang. This was leading to a race condition, and
the code was using gang->aff_ref_spu in an unsafe manner.

By holding the gang->aff_mutex a little bit longer, and increment
gang->aff_sched_count (which controls when gang->aff_ref_spu
should be reset) a little bit earlier, the problem is fixed.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] spufs: Make isolated loader properly aligned

According to the comment in spufs_init_isolated_loader(), the isolated
loader should be aligned on a 16 byte boundary.
ARCH_{KMALLOC,SLAB}_MINALIGN is not defined so only 8 byte alignment is
guaranteed.

This enforces alignment via __get_free_pages.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] spufs: Remove spu_harvest

Based on an initial patch from Sebastian Siewior
<sebastian@breakpoint.cc>

spu_harvest isn't used, remove it.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] spufs: Remove asmlinkage from do_spu_create

do_spu_create doesn't need the asmlinkage qualifier; remove it.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] spufs: Make file-internal functions & variables static

There are a few symbols used only in one file within spufs; this change
makes them static where suitable.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix pmac_zilog debug arg

drivers/serial/pmac_zilog.c:1590: warning: format '%d' expects type 'int', but argument 3 has type 'pm_message_t'

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove barriers from the SLB shadow buffer update

After talking to an IBM POWER hypervisor (PHYP) design and development
guy, there seems to be no need for memory barriers when updating the SLB
shadow buffer provided we only update it from the current CPU, which we
do.

Also, these guys see no need in the future for these barriers.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Don't cast kmalloc return value in ibmebus.c

kmalloc() returns a void pointer so there is absolutely no need to
cast it in ibmebus_chomp().

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove APUS support from arch/ppc

Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stub

Enabled using SPI controller on the MPC832x RDB board.  We currently use
a modalias of "spidev" as a place holder (replace with "mmc_spie") until
the mmc_spi driver support is merged in.

This gets us the ability to test SPI until then.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] fsl_soc: add support for fsl_spi

Add helper function to setup SPI bus/device information

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct index

Use idx as index into mpc52xx_uart_nodes instead of i

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 86xx: Fix definition of global-utilites structure

The current definition of struct ccsr_guts in immap_86xx.h was for 85xx.
This patch fixes that and replaces the vague integer types with sized types
of the correct endianness.  The unused struct ccsr_pci is also deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] add clrsetbits macros

This patch adds the clrsetbits_xxx() macros, which are used to set and clear
multiple bits in a single read-modify-write operation.  Specify the bits to
clear in the 'clear' parameter and the bits to set in the 'set' parameter.
These macros can also be used to set a multiple-bit bit pattern using a mask,
by specifying the mask in the 'clear' parameter and the new bit pattern in the
'set' parameter.  There are big-endian and little-endian versions for 8, 16,
32, and 64 bits.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] QE: extern par_io_config_pin and par_io_data_set funcs

This is needed to configure and control QE pario pins from the kernel.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[PPC] Add clrbits8 and setbits8.

These I/O accessors will be used in code under drivers/,
which is expected to still work in arch/ppc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Fix modpost warnings from head*.S on ppc32

We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Add cpu feature for SPE handling

Make it so that SPE support can be determined at runtime.  This is similiar
to how we handle AltiVec.  This allows us to have SPE support built in and
work on processors with and without SPE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx: Removed PCI exclude of PHB

Now that the generic code doesn't assign resources for Freescale
PHBs we dont have to explicitly exclude it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] DTS cleanup

Removed the following cruft from .dts files:
* 32-bit in cpu node -- doesn't exist in any spec and not used by kernel
* removed built-in (chrp legacy)
* Removed #interrupt-cells in places they don't need to be set
* Fixed ranges on lite5200*
* Removed clock-frequency from i8259 pic node, not sure where this came from
* Removed big-endian from i8259 pic nodes, this was just bogus

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port

Added basic board port for MPC8572 DS reference platform that is
similiar to the MPC8544/33 DS reference platform in uniprocessor mode.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Handle alignment faults on SPE load/store instructions

This adds code to handle alignment traps generated by the following
SPE (signal processing engine) load/store instructions, by emulating
the instruction in the kernel (as is done for other instructions that
generate alignment traps):

evldd[x]         Vector Load Double Word into Double Word [Indexed]
evldw[x]         Vector Load Double into Two Words [Indexed]
evldh[x]         Vector Load Double into Four Half Words [Indexed]
evlhhesplat[x]   Vector Load Half Word into Half Words Even and Splat [Indexed]
evlhhousplat[x]  Vector Load Half Word into Half Word Odd Unsigned and Splat [Indexed]
evlhhossplat[x]  Vector Load Half Word into Half Word Odd Signed and Splat [Indexed]
evlwhe[x]        Vector Load Word into Two Half Words Even [Indexed]
evlwhou[x]       Vector Load Word into Two Half Words Odd Unsigned (zero-extended) [Indexed]
evlwhos[x]       Vector Load Word into Two Half Words Odd Signed (with sign extension) [Indexed]
evlwwsplat[x]    Vector Load Word into Word and Splat [Indexed]
evlwhsplat[x]    Vector Load Word into Two Half Words and Splat [Indexed]
evstdd[x]        Vector Store Double of Double [Indexed]
evstdw[x]        Vector Store Double of Two Words [Indexed]
evstdh[x]        Vector Store Double of Four Half Words [Indexed]
evstwhe[x]       Vector Store Word of Two Half Words from Even [Indexed]
evstwho[x]       Vector Store Word of Two Half Words from Odd [Indexed]
evstwwe[x]       Vector Store Word of Word from Even [Indexed]
evstwwo[x]       Vector Store Word of Word from Odd [Indexed]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] fsl_soc.c cleanup

1. Update the way get_brgfreq() finds things in the device tree.

It now uses names that are less namespace polluting.  The old names
are supported until all boards are converted.

2. "size" is changed from unsigned int to int, to match what
of_get_property() expects.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 85xx: Remove unnecessary loops_per_jiffy initialization code.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 86xx: Remove unnecessary loops_per_jiffy initialization code.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] linkstation updates

1. Fix RTC type - it is a rs5c372a, not rs5c372b
2. Configure both UART interrupts edge-triggered
3. Add a license header to ls_uart.c
4. Check for running on linkstation in a late_initcall() function. Needed
   for multiplatform builds, even though linkstation doesn't support them
   yet
5. Remove unneeded #include from linkstation.c

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 85xx: Clean up from 85xx_ds rename

Renamed functions in 85xx_ds from 8544 to 85xx.

Kept an unique machine def/probe for the MPC8544 DS board to
handle some subtle differences between the future board based
on the DS platform.

Also fixed building w/o CONFIG_PCI and minor whitespace fixes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c

Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more
generic in prep for other boards based on the same platform.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

ucc_geth: kill unused include

The ucc_geth_mii code is based on the gianfar_mii code that use to include
ocp.h.  ucc never need this and it causes issues when we want to kill
arch/ppc includes from arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] PS3: Enhance storage probe debug output

Add some more info to the PS3 storage probe debug output.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Add new LV1 error codes

Add new error codes that may be returned by the LV1 hypervisor

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Fix CONFIG_SMP=n, CONFIG_KEXEC=y build

Currently, the ps3 kernel fails to build without smp but with kexec, as
ps3_kexec_cpu_down needs ps3_smp_cleanup_cpu, which isn't defined on UP
kernels. This change adds an empty ps3_smp_cleanup_cpu for UP kernels.

Booted on ps3.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add workaround for MPICs with broken register reads

Some versions of PWRficient 1682M have an interrupt controller in which
the first register in each pair for interrupt sources doesn't always
read with the right polarity/sense values.

To work around this, keep a software copy of the register instead.  Since
it's not modified from the mpic itself, it's a feasible solution.  Still,
keep it under a config option to avoid wasting memory on other platforms.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Document and implement an improved flash device binding for powerpc

This replaces the binding for flash chips in booting-without-of.txt
with an clarified and improved version.  It also makes
drivers/mtd/maps/physmap_of.c recognize this new binding.  Finally it
revises the Ebony device tree source to use the new binding as an
example.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] setup_64.c and prom.c comment cleanup

Grammatical corrections to comments.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] prom.c whitespace cleanup

Whitespace cleanup: badly indented lines.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] prom_init whitespace cleanup, typo fix

Whitespace cleanup: badly indented lines.
Typo in comment.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Check _PAGE_RW and _PAGE_PRESENT on kernel addresses

Previously, the TLB miss handlers assumed that pages above KERNELBASE are
always present and read/write.  This assumption is false in the case of
CONFIG_DEBUG_PAGEALLOC.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] bootwrapper: Only print MAC addresses when the node is actually present

Some firmwares (such as PlanetCore) only provide a base MAC address, and
expect the kernel to set certain bits to generate the addresses for the
other ports.  As such, MAC addresses are generated that may not correspond
to actual hardware.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] bootwrapper: Add get_path()

This will be used by the PlanetCore firmware support to construct
a linux,stdout-path from the serial node that it finds.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] bootwrapper: Add strtoull()

This will be needed by PlanetCore firmware support.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] bootwrapper: flatdevtree fixes

1. ft_create_node was returning the internal pointer rather than a phandle.
2. ft_find_device_rel was treating a "top" phandle of NULL as an error,
rather than as the root of the tree.  The old, absolute ft_find_device
is removed, and the relative version is renamed to ft_find_device().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove warning in arch/powerpc/kernel/sysfs.c

Fixes:

arch/powerpc/kernel/sysfs.c: In function 'cpu_add_sysdev_attr_group':
arch/powerpc/kernel/sysfs.c:388: warning: ignoring return value of
'sysfs_create_group', declared with attribute warn_unused_result

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Move lowlevel runlatch calls under cpu feature control

There's no need to call the runlatch on functions on processors that
don't implement them (CPU_FTR_CTRL).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove unused platform_machine_check()

Remove leftover cruft from ARCH=ppc.

There are no users of platform_machine_check() in ARCH=powerpc, and none
should be added (they should use ppc_md.machine_check_handler instead).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Move pasemi_idle_init() to late_initcall()

Move pasemi_idle_init() to be a late_initcall instead of being called from
setup_arch().  This way the cpufreq driver has a chance to initialize and
save away the boot time astate before we go to idle for the first time.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Print more information at machine check

Add printout of some SoC error status registers, and dump the SLB contents
for those machine check events where it makes sense.

Since we can't go about and ioremap registers at machine check time,
and we generally want to do as little as possible to print out the
information, pre-build a table of the registers to dump and their address
in the common PCI config space range.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=y

Export some of the implementation-specific registers via sysfs.
Useful when debugging, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Add workaround for erratum 5945

Erratum 5945 causes some of the registers on the PCIe root ports to
not read correctly.  Do a small dance to avoid this: Write an unused
register, read the value and write it back.  Thankfully this is not in
a hot code path.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Add pasemi_pci_getcfgaddr()

Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific
config register for a PCI device.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Export new __io{re,un}map_at() symbols

Export new __io{re,un}map_at() symbols so modules can use them.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Export virq mapping via debugfs

This adds a debugfs file "powerpc/virq_mapping", which shows the virtual
to real mapping of irq numbers.  Enable it with CONFIG_VIRQ_DEBUG.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Chen Gong <G.Chen@freescale.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Initialise hwirq for legacy irqs

Although no one uses the hwirq value for legacy irqs at the moment, we
should really setup the correct value in the irq_map.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Provide a default irq_host match, which matches on an exact of_node

The most common match semantic is an exact match based on the device node.
So provide a default implementation that does this, and hook it up if no
match routine is specified.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Invert null match behaviour for irq_hosts

Currently if you don't specify a match callback for your irq_host it's
assumed you match everything. This is a kind of opt-out approach, and
turns out to be the exception rather than the rule.

So change the semantics to be opt-in, ie. you don't match anything unless
you provide a match callback.  This in itself isn't very useful, but will
allow us to provide a default match implementation in a subsequent patch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add an optional device_node pointer to the irq_host

The majority of irq_host implementations (3 out of 4) are associated
with a device_node, and need to stash it somewhere. Rather than having
it somewhere different for each host, add an optional device_node pointer
to the irq_host structure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Move bootwrapper's strchr() and strncmp() from .h to string.S

Currently the bootwrapper has implementations of strchr() and
strncmp(), but they're inlines in flatdevtree_env.h, rather than in
string.S with all the rest of the string functions.  This moves
them to string.S.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] IOMMU virtual merge is no longer experimental

Per conversations with BenH, IOMMU virtual merging should no longer
be considered to be an "experimental" feature.  In particular,
CONFIG_VMERGE has been set to "y" in the defconfigs for quite a while.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
----
 arch/powerpc/Kconfig |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'linux-2.6' into for-2.6.24

Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Move serial_dev_init to device_initcall()
  [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue
  [POWERPC] cpm2: Fix off-by-one error in setbrg().
  [PPC] 8xx: Fix r3 trashing due to 8MB TLB page instantiation
  [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI

lguest: Fix guest crash when CONFIG_X86_USE_3DNOW=y

One of the very first things lguest_init() does is a memcpy.  On
Athlon/Duron/K7 or CyrixIII/VIA-C3 or Geode GX/LX, this tries to use
MMX.

memcpy -> _mmx_memcpy -> kernel_fpu_begin -> clts -> paravirt_ops.clts

But we haven't set paravirt_ops.clts yet, so we do the native version
and crash.  The simplest solution is to use __memcpy.

Thanks to Michael Rasenberger for the bug report.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[POWERPC] Move serial_dev_init to device_initcall()

With the I/O space rewrite by BenH, the legacy_serial serial_dev_init()
initcall is now called before I/O space is setup, but it's dependent on
it being available.

Since there's no way to make dependencies between initcalls, we'll just
have to move it to device_initcall(). Yes, it's suboptimal but I'm not
aware of any better solution at this time, and it fixes a regression
from 2.6.22.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

i386: Fix leak of ../kernel from top level

Fix a compile error when the directory above the kernel source contains
a file named "kernel".  Originally from Ben LaHaise, modified based on
feedback from Sam Ravnborg

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben LaHaise <bcrl@kvack.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Prevent doing anything from cache_remove_dev() when info setup failed.

AK: Removed the unlikelies because gcc heuristics default to unlikely
AK: for test == NULL and for negative returns.

Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Add missing mask operation to vdso

vdso vgetns() didn't mask the time source offset calculation, which
could lead to time problems with 32bit HPET.  Add the masking.

Thanks to Chuck Ebbert for tracking this down.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add missing include for leds.h

Define termios_1 functions for powerpc, s390, avr32 and frv

Commit f629307c857c030d5a3dd777fee37c8bb395e171 introduced uses of
kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1
on all architectures.  However, powerpc, s390, avr32 and frv don't
currently define those functions since their termios struct didn't
need to be changed when the arbitrary baud rate stuff was added, and
thus the kernel won't currently build on those architectures.

This adds definitions of kernel_termios_to_user_termios_1 and
user_termios_to_kernel_termios_1 to include/asm-generic/termios.h
which are identical to kernel_termios_to_user_termios and
user_termios_to_kernel_termios respectively.  The definitions are the
same because the "old" termios and "new" termios are in fact the same
on these architectures (which are the same ones that use
asm-generic/termios.h).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue

Since the ULI1575 has a ISA bus we need to enable the generic ISA dma
support for drivers that might expect it.  Without this we get compile
errors like the following:

ound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `release_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:195: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o:/home/galak/git/linux-8572/include/asm/dma.h:195: more undefined references to `dma_spin_lock' follow
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BLUETOOTH]: Fix non-COMPAT build of hci_sock.c

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix booting on V100 systems.

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - correctly set 'phys'
  Input: i8042 - add HP Pavilion DV4270ca to the MUX blacklist
  Input: i8042 - fix modpost warning
  Input: add more Braille keycodes

[BLUETOOTH]: Fix non-COMPAT build of hci_sock.c

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix booting on V100 systems.

On the root PCI bus, the OBP device tree lists device 3 twice.
Once as 'pm' and once as 'lomp'.

Everything goes downhill from there.

Ignore the second instance to workaround this.

Thanks to Kövedi_Krisztián for the bug report and
testing the fix.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Fix calculation of i_blocks during truncate
  [PATCH] ocfs2: Fix a wrong cluster calculation.
  [PATCH] ocfs2: fix mount option parsing
  ocfs2: update docs for new features

fix SERIAL_CORE_CONSOLE driver dependencies

SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y.

Additionally, this patch fixes whitespace instead of tabs at the
SERIAL_MUX_CONSOLE option.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Subject: [PATCH] Intel FB pixel clock calculation fix

Intel framebuffer mis-calculated pixel clocks.

The pixel clock (and thus both H and V sync) will be slower than requested, so
if you set the minimum allowed the display may not sync.  In case of really
old CRT display it could theoretically damage it.

I'm using it with PAL TV (using RGB input - SCART connector) and the bug
prevented it from working at all (TV requirements are more strict and made the
bug visible).

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: accurately compare debug flags during slab cache merge

This was posted on Aug 28 and fixes an issue that could cause troubles
when slab caches >=128k are created.

http://marc.info/?l=linux-mm&m=118798149918424&w=2

Currently we simply add the debug flags unconditional when checking for a
matching slab.  This creates issues for sysfs processing when slabs exist
that are exempt from debugging due to their huge size or because only a
subset of slabs was selected for debugging.

We need to only add the flags if kmem_cache_open() would also add them.

Create a function to calculate the flags that would be set
if the cache would be opened and use that function to determine
the flags before looking for a compatible slab.

[akpm@linux-foundation.org: fixlets]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "highmem: catch illegal nesting"

Revert

commit 656dad312fb41ed95ef08325e9df9bece3aacbbb
Author: Ingo Molnar <mingo@elte.hu>
Date:   Sat Feb 10 01:46:36 2007 -0800

[PATCH] highmem: catch illegal nesting

Catch illegally nested kmap_atomic()s even if the page that is mapped by
the 'inner' instance is from lowmem.

This avoids spuriously zapped kmap-atomic ptes and turns hard to find
crashes into clear asserts at the bug site.

Problem is, a get_zeroed_page(GFP_KERNEL) from interrupt context will trigger
this check if non-irq code on this CPU holds a KM_USER0 mapping.  But that
get_zeroed_page() will never be altering the kmap slot anyway due to the
GFP_KERNEL.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix "no_sync_cmos_clock" logic inversion in kernel/time/ntp.c

Seems to me that this timer will only get started on platforms that say
they don't want it?

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Gabriel Paubert <paubert@iram.es>
Cc: Zachary Amsden <zach@vmware.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Leases can be hidden by flocks

The inode->i_flock list contains the leases, flocks and posix
locks in the specified order. However, the flocks are added in
the head of this list thus hiding the leases from F_GETLEASE
command, from time_out_leases() and other code that expects
the leases to come first.

The following example will demonstrate this:

#define _GNU_SOURCE

#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/file.h>

static void show_lease(int fd)
{
        int res;

        res = fcntl(fd, F_GETLEASE);
        switch (res) {
                case F_RDLCK:
                        printf("Read lease\n");
                        break;
                case F_WRLCK:
                        printf("Write lease\n");
                        break;
                case F_UNLCK:
                        printf("No leases\n");
                        break;
                default:
                        printf("Some shit\n");
                        break;
        }
}

int main(int argc, char **argv)
{
        int fd, res;

        fd = open(argv[1], O_RDONLY);
        if (fd == -1) {
                perror("Can't open file");
                return 1;
        }

        res = fcntl(fd, F_SETLEASE, F_WRLCK);
        if (res == -1) {
                perror("Can't set lease");
                return 1;
        }

        show_lease(fd);

        if (flock(fd, LOCK_SH) == -1) {
                perror("Can't flock shared");
                return 1;
        }

        show_lease(fd);

        return 0;
}

The first call to show_lease() will show the write lease set, but
the second will show no leases.

Fix the flock adding so that the leases always stay in the head
of this list.

Found during making the flocks pid-namespaces aware.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

intel_agp: fix GTT map size on G33

G33 has 1MB GTT table range.  Fix GTT mapping in case like 512MB aperture
size.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

intel_agp: fix stolen mem range on G33

G33 GTT stolen memory is below graphics data stolen memory and be seperate,
so don't subtract it in stolen mem counting.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k(nommu): add missing syscalls

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix select on /proc files without ->poll

Taneli Vähäkangas <vahakang@cs.helsinki.fi> reported that commit
786d7e1612f0b0adb6046f19b906609e4fe8b1ba aka "Fix rmmod/read/write races
in /proc entries" broke SBCL + SLIME combo.

The old code in do_select() used DEFAULT_POLLMASK, if couldn't find
->poll handler.  The new code makes ->poll always there and returns 0 by
default, which is not correct.  Return DEFAULT_POLLMASK instead.

Steps to reproduce:

install emacs, SBCL, SLIME
emacs
M-x slime in *inferior-lisp* buffer
[watch it doing "Connecting to Swank on port X.."]

Please, apply before 2.6.23.

P.S.: why SBCL can't just read(2) /proc/cpuinfo is a mystery.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: T Taneli Vahakangas <vahakang@cs.helsinki.fi>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Restore call_usermodehelper_pipe() behaviour

The semantics of call_usermodehelper_pipe() used to be that it would fork
the helper, and wait for the kernel thread to be started.  This was
implemented by setting sub_info.wait to 0 (implicitly), and doing a
wait_for_completion().

As part of the cleanup done in 0ab4dc92278a0f3816e486d6350c6652a72e06c8,
call_usermodehelper_pipe() was changed to pass 1 as the value for wait to
call_usermodehelper_exec().

This is equivalent to setting sub_info.wait to 1, which is a change from
the previous behaviour.  Using 1 instead of 0 causes
__call_usermodehelper() to start the kernel thread running
wait_for_helper(), rather than directly calling ____call_usermodehelper().

The end result is that the calling kernel code blocks until the user mode
helper finishes.  As the helper is expecting input on stdin, and now no one
is writing anything, everything locks up (observed in do_coredump).

The fix is to change the 1 to UMH_WAIT_EXEC (aka 0), indicating that we
want to wait for the kernel thread to be started, but not for the helper to
finish.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: termios locking functions break with new termios type

I ran into a few problems.

n_tty_ioctl() for instance:

drivers/char/tty_ioctl.c:799: error: $,1rxstruct termios$,1ry has no
member named $,1rxc_ispeed$,1ry

This is calling the copy interface that is supposed to be using
a termios2 when the new interfaces are defined, however:

case TIOCGLCKTRMIOS:
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
return -EFAULT;
return 0;

This is going to write over the end of the userspace
structure by a few bytes, and wasn't caught by you yet
because the i386 implementation is simply copy_to_user()
which does zero type checking.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

futex_compat: fix list traversal bugs

The futex list traversal on the compat side appears to have
a bug.

It's loop termination condition compares:

        while (compat_ptr(uentry) != &head->list)

But that can't be right because "uentry" has the special
"pi" indicator bit still potentially set at bit 0.  This
is cleared by fetch_robust_entry() into the "entry"
return value.

What this seems to mean is that the list won't terminate
when list iteration gets back to the the head.  And we'll
also process the list head like a normal entry, which could
cause all kinds of problems.

So we should check for equality with "entry".  That pointer
is of the non-compat type so we have to do a little casting
to keep the compiler and sparse happy.

The same problem can in theory occur with the 'pending'
variable, although that has not been reported from users
so far.

Based on the original patch from David Miller.

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix typo in Documentation/SubmittingPatches

Signed-off-by: Andre Haupt <andre@finow14.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PTR_ALIGN

The AdvanSys driver wants to align some pointers, and the ALIGN macro
doesn't work for pointers.  Rather than try to make it work, add a new
PTR_ALIGN macro which is typesafe.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC v3020 fixes

Fix off-by-one in month calculations
Add delay for bus accesses to satisfy Tw > 500ns

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Raphael Assenat <raph@8d.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

H8/300: Fix misnamed "CONFIG_BLKDEV_RESERVE_ADDRESS" Kconfig variable

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Satyam Sharma <satyam@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/00-INDEX: notice ecryptfs.txt moved

ecryptfs.txt moved into filesystems, make 00-INDEX follow.

Signed-off-by: Rob Landley <rob@landley.net>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix DAC960 driver on machines which don't support 64-bit DMA

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8942

Use PCI_DMA_* constants instead of own private definitions Fall back to
32-bit DMA mask if a 64-bit one fails

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Jeff Garzik <jeff@garzik.org>
Tested-by: Lars <polynomial-c@gmx.de>
Cc: Alessandro Polverini <alex@nibbles.it>
Cc: <dac@conglom-o.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

afs: mntput called before dput

dput must be called before mntput here.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: fix some bugs with growing raid5/raid6 arrays.

The recent changed to raid5 to allow offload of parity calculation etc
introduced some bugs in the code for growing (i.e.  adding a disk to) raid5
and raid6.  This fixes them

Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PNP: remove SMCf010 quirk

If the quirk enables the SIR part of the SMCf010 device, the 8250 driver
may claim it as a legacy ttyS device, which makes the legacy probe in the
smsc-ircc2 driver fail.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BCM1480 serial build fix

Restores serial functionality for the BCM1480.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix e752x correct return code

This patch changes the error code when dev0:fun1 was hidden by BIOS to one
more appropriate.

Signed-off-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix printk level down to debug from emerg

When EDAC is configured for EDAC DEBUGGING, the debug printk output level
was set TOO high (EMERG). This patch brings it down to a DEBUG level

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>