sched: max_vruntime() simplification

max_vruntime() simplification.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: fix sched_fork()

fix sched_fork(): large latencies at new task creation time because
the ->vruntime was not fixed up cross-CPU, if the parent got migrated
after the child's CPU got set up.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fix sign check error in place_entity()

fix sign check error in place_entity() - we'd get excessive
latencies due to negatives being converted to large u64's.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: undo some of the recent changes

undo some of the recent changes that are not needed after all,
such as last_min_vruntime.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: remove last_min_vruntime effect

remove last_min_vruntime use - prepare to remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: remove condition from set_task_cpu()

remove condition from set_task_cpu(). Now that ->vruntime
is not global anymore, it should (and does) work fine without
it too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: entity_key() fix

entity_key() fix - we'd occasionally end up with a 0 vruntime
in the !initial case.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched debug: check spread

debug feature: check how well we schedule within a reasonable
vruntime 'spread' range. (note that CPU overload can increase
the spread, so this is not a hard condition, but normal loads
should be within the spread.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched debug: more width for parameter printouts

more width for parameter printouts in /proc/sched_debug.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add vslice

add vslice: the load-dependent "virtual slice" a task should
run ideally, so that the observed latency stays within the
sched_latency window.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched debug: print settings

print the current value of all tunables in /proc/sched_debug output.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove unneeded tunables

remove unneeded tunables.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched debug: BKL usage statistics, fix

build fix for the SCHED_DEBUG && !SCHEDSTATS case.

Signed-off-by: S.Ceglar Onur <caglar@pardus.org.tr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched debug: BKL usage statistics

add per task and per rq BKL usage statistics.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: enable CONFIG_FAIR_GROUP_SCHED=y by default

enable CONFIG_FAIR_GROUP_SCHED=y by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fair-group sched, cleanups

fair-group sched, cleanups.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add fair-user scheduler

Enable user-id based fair group scheduling. This is useful for anyone
who wants to test the group scheduler w/o having to enable
CONFIG_CGROUPS.

A separate scheduling group (i.e struct task_grp) is automatically created for
every new user added to the system. Upon uid change for a task, it is made to
move to the corresponding scheduling group.

A /proc tunable (/proc/root_user_share) is also provided to tune root
user's quota of cpu bandwidth.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: clean up code under CONFIG_FAIR_GROUP_SCHED

With the view of supporting user-id based fair scheduling (and not just
container-based fair scheduling), this patch renames several functions
and makes them independent of whether they are being used for container
or user-id based fair scheduling.

Also fix a problem reported by KAMEZAWA Hiroyuki (wrt allocating
less-sized array for tg->cfs_rq[] and tf->se[]).

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: print &rq->cfs stats

- Print &rq->cfs statistics as well (useful for group scheduling)

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: print nr_running and load in /proc/sched_debug

- print nr_running and load information for cfs_rq in /proc/sched_debug

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fix minor bug in yield

- fix a minor bug in yield (seen for CONFIG_FAIR_GROUP_SCHED),
  group scheduling would skew when yield was called.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: revert recent removal of set_curr_task()

Revert removal of set_curr_task.
Use put_prev_task/set_curr_task when changing groups/policies

Signed-off-by: Srivatsa Vaddagiri < vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: kernel/sched_fair.c whitespace cleanups

some trivial whitespace cleanups.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fix formatting of /proc/sched_debug

fix formatting of /proc/sched_debug

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: enhance debug output

enhance debug output by changing 12345678 nsecs to 12.345678 output,
this is more human-readable.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: prettify /proc/sched_debug output

print the correct amount of dashes in /proc/sched_debug.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: rework enqueue/dequeue_entity() to get rid of set_curr_task()

rework enqueue/dequeue_entity() to get rid of
sched_class::set_curr_task(). This simplifies sched_setscheduler(),
rt_mutex_setprio() and sched_move_tasks().

   text    data     bss     dec     hex filename
  24330    2734      20   27084    69cc sched.o.before
  24233    2730      20   26983    6967 sched.o.after

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: simplify sched_class::yield_task()

the 'p' (task_struct) parameter in the sched_class :: yield_task() is
redundant as the caller is always the 'current'. Get rid of it.

   text    data     bss     dec     hex filename
  24341    2734      20   27095    69d7 sched.o.before
  24330    2734      20   27084    69cc sched.o.after

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: optimize task_new_fair()

due to the fact that we no longer keep the 'current' within the tree,
dequeue/enqueue_entity() is useless for the 'current' in
task_new_fair(). We are about to reschedule and
sched_class->put_prev_task() will put the 'current' back into the tree,
based on its new key.

   text    data     bss     dec     hex filename
  24388    2734      20   27142    6a06 sched.o.before
  24341    2734      20   27095    69d7 sched.o.after

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fix delay accounting performance regression

fix delay accounting performance regression - those sched_clock()
calls are not needed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: do not keep current in the tree and get rid of sched_entity::fair_key

Get rid of 'sched_entity::fair_key'.

As a side effect, 'current' is not kept withing the tree for
SCHED_NORMAL/BATCH tasks anymore. This simplifies some parts of code
(e.g. entity_tick() and yield_task_fair()) and also somewhat optimizes
them (e.g. a single update_curr() now vs. dequeue/enqueue() before in
entity_tick()).

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add set_curr_task() calls

p->sched_class->set_curr_task() has to be called before
activate_task()/enqueue_task() in rt_mutex_setprio(),
sched_setschedule() and sched_move_task() in order to set up
'cfs_rq->curr'. The logic of enqueueing depends on whether a task to be
inserted is 'current' or not.

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: sched_setscheduler() fix

Fix a problem in the 'sched-group' patch for !CONFIG_FAIR_GROUP_SCHED.

description:

sched_setscheduler()
{
...
if (task_running()) p->sched_class->put_prev_entity();

[ this one sets up cfs_rq->curr to NULL ]

...

if (task_running) p->sched_class->set_curr_task();

[ and this one is a _NOP_ (empty) for !CONFIG_FAIR_GROUP_SCHED ]

As a result, the task continues to run with cfs_rq->curr == NULL... no
crashes (due to checks for !NULL in place) but e.g. update_curr()
effectively becomes a NOP... i.e. runtime statistics for this task is
not accounted untill it's rescheduled anew.

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: group-scheduler core

Add interface to control cpu bandwidth allocation to task-groups.

(not yet configurable, due to missing CONFIG_CONTAINERS)

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>

sched: fix SMP migration latencies

fix SMP migration latencies: the vruntimes of different CPUs are
at incompatible offsets so they have to be fixed up when migrating
a task across CPUs.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: better min_vruntime tracking

Better min_vruntime tracking: update it every time 'curr' is
updated - not just when a task is enqueued into the tree.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: x86: allow single-depth wchan output

sched.o gets smaller and faster if we compile it with -fomit-frame-pointers,
so make this a config option. The cost is the loss of multi-depth wchan
lookups - but SysRq-T is a sufficient replacement for them anyway, so their
utility is much lower these days.

the size difference is significant:

   text    data     bss     dec     hex filename
  34005    3462      24   37491    9273 sched.o.before
  33470    3462      24   36956    905c sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: clean up schedstat block in dequeue_entity()

Better placement of #ifdef CONFIG_SCHEDSTAT block in dequeue_entity().

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove wait_runtime fields and features

remove wait_runtime based fields and features, now that the CFS
math has been changed over to the vruntime metric.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove wait_runtime limit

remove the wait_runtime-limit fields and the code depending on it, now
that the math has been changed over to rely on the vruntime metric.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: clean up struct load_stat

'struct load_stat' is redundant now so let's get rid of it.

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: debug: update exec_clock only when SCHED_DEBUG

micro-optimization: update cfs_rq->exec_clock only if
CONFIG_SCHED_DEBUG=y.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add more vruntime statistics

add more vruntime statistics.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: handle vruntime 64-bit overflow

Handle vruntime overflow by centering the key space around min_vruntime.

( otherwise we could overflow 64-bit vruntime in a few days with SCHED_IDLE
 tasks - or in a few years with nice +19. )

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add tree based averages

add support for tree based vruntime averages.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove SCHED_FEAT_SKIP_INITIAL

remove SCHED_FEAT_SKIP_INITIAL - it was off by default and even
when enabled it never made any real difference.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: add se->vruntime debugging

debug se->vruntime fields.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>

sched: clean up new task placement

clean up new task placement.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>

sched: wakeup granularity increase

increase wakeup granularity - we were overscheduling a bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>

sched: simplify check_preempt() methods

simplify the check_preempt() methods.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>

sched: simplify adaptive latency

simplify adaptive latency.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: new task placement for vruntime

add proper new task placement for the vruntime based math too.

( note: introduces a swap() macro, but the swap token is too
  widely used in the kernel namespace for a generic version
  to be added without changing non-scheduler code - so this
  cleanup will be done separately. )

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: optimize vruntime based scheduling

optimize vruntime based scheduling.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: move sched_feat() definitions

move sched_feat() definitions so that it can be used sooner by generic
code too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: introduce se->vruntime

introduce se->vruntime as a sum of weighted delta-exec's, and use that
as the key into the tree.

the idea to use absolute virtual time as the basic metric of scheduling
has been first raised by William Lee Irwin, advanced by Tong Li and first
prototyped by Roman Zippel in the "Really Fair Scheduler" (RFS) patchset.

also see:

   http://lkml.org/lkml/2007/9/2/76

for a simpler variant of this patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: clean up calc_weighted()

clean up calc_weighted() - we always use the normalized shift so
it's not needed to pass that in. Also, push the non-nice0 branch
into the function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: speed up update_load_add/_sub()

speed up update_load_add/_sub() by not delaying the division - this
reduces CPU pipeline dependencies.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: uninline __enqueue_entity()/__dequeue_entity()

suggested by Roman Zippel: uninline __enqueue_entity() and
__dequeue_entity().

this reduces code size:

      text    data     bss     dec     hex filename
     25385    2386      16   27787    6c8b sched.o.before
     25257    2386      16   27659    6c0b sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: simplify SCHED_FEAT_* code

Peter Zijlstra suggested to simplify SCHED_FEAT_* checks via the
sched_feat(x) macro.

No code changed:

   text    data     bss     dec     hex filename
   38895    3550      24   42469    a5e5 sched.o.before
   38895    3550      24   42469    a5e5 sched.o.after

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: cleanup: simplify cfs_rq_curr() methods

cleanup: simplify cfs_rq_curr() methods - now that the cfs_rq->curr
pointer is unconditionally present, remove the wrappers.

  kernel/sched.o:
      text    data     bss     dec     hex filename
     11784     224    2012   14020    36c4 sched.o.before
     11784     224    2012   14020    36c4 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: track cfs_rq->curr on !group-scheduling too

Noticed by Roman Zippel: use cfs_rq->curr in the !group-scheduling
case too. Small micro-optimization and cleanup effect:

   text    data     bss     dec     hex filename
   36269    3482      24   39775    9b5f sched.o.before
   36177    3486      24   39687    9b07 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove precise CPU load calculations #2

continued removal of precise CPU load calculations.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove precise CPU load

CPU load calculations are statistical anyway, and there's little benefit
from having it calculated on every scheduling event. So remove this code,
it gets rid of a divide from the scheduler wakeup and context-switch
fastpath.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: remove stat_gran

remove the stat_gran code - it was disabled by default and it causes
unnecessary overhead.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: use constants if !CONFIG_SCHED_DEBUG

use constants if !CONFIG_SCHED_DEBUG.

this speeds up the code and reduces code-size:

    text    data     bss     dec     hex filename
   27464    3014      16   30494    771e sched.o.before
   26929    3010      20   29959    7507 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: uniform tunings

use the same defaults on both UP and SMP.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: debug: track maximum 'slice'

track the maximum amount of time a task has executed while
the CPU load was at least 2x. (i.e. at least two nice-0
tasks were runnable)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: small sched_debug cleanup

small kernel/sched_debug.c cleanup - break up
multi-variable assignment.

no code changed:

   text    data     bss     dec     hex filename
   38869    3550      24   42443    a5cb sched.o.before
   38869    3550      24   42443    a5cb sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: use list_for_each_entry_safe() in __wake_up_common()

Use list_for_each_entry_safe() instead of list_for_each_safe() in
__wake_up_common()

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: resched task in task_new_fair()

to get full child-runs-first semantics make sure the parent is
rescheduled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

sched: fix sysctl_sched_child_runs_first flag

fix the sched_child_runs_first flag: always call into ->task_new()
if we are on the same CPU, as SCHED_OTHER tasks depend on it for
correct initial setup.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Fix compile while compiling drivers/mmc/host/mmc_spi.o with !BLOCK

Make sure the mmc_spi driver can build without CONFIG_BLOCK.
Issue noted by "Avuton Olrich" <avuton@gmail.com> and randconfig.

While that won't be a common configuration, sometimes embedded
boards use SDIO to interface WLAN or Bluetooth chips (vs some
parallel interface), and don't provide an MMC/SD socket for use
with flash memory cards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/tglx/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86:
  x86: force timer broadcast on late AMD C1E detection
  x86: move local APIC timer init to the end of start_secondary()
  clockevents: introduce force broadcast notifier
  x86: fix missing include for vsyscall

sky2: reboot fix

The call to napi_disable() in the PCI shutdown handler is problematic,
and is aggravated by the new NAPI.
Also, make sure watchdog timer doesn't go off.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: force timer broadcast on late AMD C1E detection

The 64bit SMP bootup is slightly different to the 32bit one. It enables
the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E
systems have the C1E feature flag only set in the secondary CPU. Due to
the early enable of the boot CPU local APIC timer the APIC timer is
registered as a fully functional device. When we detect the wreckage during
the bringup of the secondary CPU, we need to force the boot CPU into
broadcast mode.

Check the C1E caused APIC timer disable, when the secondary APIC timer is
initialized. If the boot CPU APIC timer was registered as a functional
clock event device, then fix this up and utilize the
CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already
registered boot CPU APIC timer into broadcast mode.

Tested by force injecting the failure mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: move local APIC timer init to the end of start_secondary()

Preparatory patch for the AMD C1E wreckage fixup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

clockevents: introduce force broadcast notifier

The 64bit SMP bootup is slightly different to the 32bit one. It enables
the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E
systems have the C1E feature flag only set in the secondary CPU. Due to
the early enable of the boot CPU local APIC timer the APIC timer is
registered as a fully functional device. When we detect the wreckage during
the bringup of the secondary CPU, we need to force the boot CPU into
broadcast mode.

Add a new notifier reason and implement the force broadcast in the clock
events layer.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: fix missing include for vsyscall

 > Maybe I just picked a bad time to try, but...
 >
 > arch/x86/kernel/alternative.c: In function 'apply_alternatives':
 > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_START' undeclared (first use in this function)
 > arch/x86/kernel/alternative.c:191: error: (Each undeclared identifier is reported only once
 > arch/x86/kernel/alternative.c:191: error: for each function it appears in.)
 > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_END' undeclared (first use in this function)
 > make[1]: *** [arch/x86/kernel/alternative.o] Error 1
 > make: *** [arch/x86/kernel] Error 2

Try this.

Include missing header for vsyscall.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits)
  hwmon: (vt8231) fix sparse warning
  hwmon: (sis5595) fix sparse warning
  hwmon: (w83627hf) don't assume bank 0
  hwmon: (w83627hf) Fix setting fan min right after driver load
  hwmon: (w83627hf) De-macro sysfs callback functions
  hwmon: Add new combined driver for FSC chips
  hwmon: (ibmpex) Release IPMI user if hwmon registration fails
  hwmon: (dme1737) Add sch311x support
  hwmon: (dme1737) group functions logically
  hwmon: (dme1737) cleanups
  hwmon: IBM power meter driver
  hwmon: (coretemp) Add support for Celeron 4xx
  hwmon: (lm87) Disable VID when it should be
  hwmon: (w83781d) Add individual alarm and beep files
  hwmon: VRM is not read from registers
  MAINTAINERS: update hwmon subsystem git trees
  hwmon: Fix the code examples in documentation
  hwmon: update sysfs interface document - error handling
  hwmon: (thmc50) Fix a debug message
  hwmon: (thmc50) Don't create temp3 if not enabled
  ...

hisax: hfc_usb: update to current CVS version

- killed paranoid NULL Pointer check
- human readable LED states
- support for "Eicon DIVA USB 4.0" (0x071d/0x1005)

Signed-off-by: Martin Bachem <info@colognechip.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipg: endianness fixes

if your mask is host-endian, you should apply it after le64_to_cpu();
if it's little-endian - before.  Doing both (for the same mask and
little-endian value) is broken.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipg: endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix endianness bug in inet_lro

all uses of and almost all assignments to lro_desc->tcp_ack assume that it's
net-endian; one converts net-endian to host-endian and sticks it in
lro_desc->tcp_ack.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inet_lro: trivial endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hamradio: ->hard_header() takes packet type in host-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

more tulip endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ibm_newemac annotations (iomem, NULL noise)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

endianness annotations in arm io.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

more low-hanging fruits - kernel, fs, lib signedness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

more trivial signedness fixes in drivers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signedness: module_param_array nump argument

... should be unsigned int

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

long vs. unsigned long - low-hanging fruits in drivers

deal with signedness of the stuff passed to set_bit() et.al.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frv: missing casts in cmpxchg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

synclink_gt endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

endian-clean in_le64/out_le64

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/partitions/sun.c endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fw-cdev __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mpc5200_wdt: __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate.c __user annotation

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix breakage in sctp getsockopt

copy_to_user() into on-stack array

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>