Staging: rts5208: Fix checkpatch warning: else is not generally useful

The following checkpatch warning was fixed:

WARNING: else is not generally useful after a break or return

Signed-off-by: Leung Timothy Chi King <contact@timothyleung.co>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ozwpan: ozusbsvc1.c: Fix missing blank line after declarations

This patch fixes a missing line after declarations issue.

Signed-off-by: Johannes Postma <jgmpostma@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fold rtl8188e_read_chip_version() into rtl8188e_SetHalODMVar()

Both rtl8188e_read_chip_version() and ReadChipVersion8188E() are used
only in one place.  Make ReadChipVersion8188E() a void function and
eliminate its wrapper - rtl8188e_read_chip_version().

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove ROMVer from struct HAL_VERSION

ROM version on RTL8188EU is always 0.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove RFtype from struct HAL_VERSION

RFtype in struct HAL_VERSION duplicates rf_type in struct
hal_data_8188e, and does not change.  Remove it and the macros that test
it.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove ICtype from struct HAL_VERSION

IC type on RTL8188EU is always 8188E.  Remove it and all the macros that
check it.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove RegulatorMode from struct hal_data_8188e

This field is not used anywhere.  Also, kill the rt_regulator_mode enum
which exists just for this field.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Fixed 80 character length warning

When the checkpatch.pl script was run, it showed lines with length
more than 80 characters in rtw_ap.c file. Fixed line number 382 by
breaking it up into two lines within 80 characters.

Signed-off-by: Sreenath Madasu <Sreenath.Madasu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: rtw_mlme: remove space before ','

Fix coding style error by removing spaces before ',' as suggested by
checkpatch.pl script.

Signed-off-by: Sunil Shahu <shshahu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu: Code cleanup fix reported by coccinelle

bool check modified

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: don't duplicate ieee80211 WLAN_CAPABILITY_* constants

linux/ieee80211.h already defines constants for capability bits.
Include it where needed, resolve discrepancies in naming, and remove the
duplicated definitions.

Also, make use of WLAN_CAPABILITY_IS_STA_BSS() macro to check if neither
ESS nor IBSS capability bits are set.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: use kernel commandline

We were only using the kernel commandline to set the mode if this driver
is builtin, but when it is built as a module we were not having any way
to set the mode. Start using commandline even if it is built as a
module.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: fix error handling

We were checking smtc_regbaseaddress and that too at a place where it
can never be NULL. Real check should be on sfb->lfb immediately after
we do ioremap.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: remove unused macros

These macros were only defined but not used anywhere.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: fix indentation

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt29f_spinand: Remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: Move register helper functions to header

and mark them as static inline.
This shrinks the compiled module from 137442 to 117732 bytes and we also
get rid of vb_util.c

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: prefer using the BIT macro

This patch uses the  BIT macro for bit shift operation.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712:Fix checkpatch warning

Fix line over 80 characters warning.

Signed-off-by: Ravi Teja Darbha <ravi2j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_security.c: remove unnecessary variable initialization

Variable "u32 c" always re-initialize in for loop.
Initialized value of "u32 c" is not used in function
and is redundant, hence removed.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sunil Shahu <shshahu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8712: remove unnecessary else statement

"else" statement after "if" is unnecessary, hence removed.

Signed-off-by: Sunil Shahu <shshahu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: convert pack pragma to __packed

Convert a Microsoft compiler specific directive "#pragma pack(1)" to a
GCC equivalent __packed. Also, by doing this we save
ourselves from trouble if any other struct definitions are added after
the #pragma because it will be applied to all of the definitions
following it.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000-usb: shorten lines to under 80 characters

Wrap function arguments to shorten lines to under 80 characters.

Signed-off-by: Peter Karlsson <peter@zapto.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000-usb: fixed table alignment

Fixed alignment to 8 bytes per line.

Signed-off-by: Peter Karlsson <peter@zapto.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Replace memset with eth_zero_addr

Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@eth_zero_addr@
expression e;
@@

-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u: Fix "space required after that ','" errors

Fix checkpatch.pl "space required after that ','" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8723au:odm.c:Removing trailing whitespaces

This patch removes the trailing whitespace error given
by checkpatch.pl

Signed-off-by: Joglekar Tejas <tjogleka@visteon.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Remove do { } while (0) from single-statement macros in upc.h.

This patch fixes checkpatch.pl warnings in upc.h regarding single-statement macros
embedded within do { } while (0) blocks.

Signed-off-by: Nicholas Parkanyi <n.parkanyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Replace C99 comments in rf.h and rf.c.

This patch replaces C99 comments in rf.h and rf.c, with
C89 comments, fixing the checkpatch.pl errors.

Signed-off-by: Nicholas Parkanyi <n.parkanyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix missing power saving support

Add IEEE80211_HW_SUPPORTS_PS to ieee80211_hw flags
enabling this feature.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Correct listen interval TBTT wake up

PSbIsNextTBTTWakeUp is called at beacon intervals.

The should listen to next beacon on count down of wake_up_count == 1.

This restores this back to vendors code but modified for mac80211.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: vnt_tx_packet don't wakeup from power saving.

mac80211 changes the wake state before attempting to tx data

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Fixed two lines over 80 characters long

The presence of comments originally caused the two lines
to be over 80 characters long.

The issue is fixed by moving the comments into a separate line.

Signed-off-by: Arjun Krishna Babu <arjunkrishnababu96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Add support for the Ultrachip UC1611 LCD controller

This is a driver chip for 240x160 4-bit greyscale LCDs.
It is capable of 4-wire (8 bit) or 3-wire (9 bit) SPI that have both been
tested. (It also has a 6800 or 8080-style parallel interface, but I have
not included support for it.)

Signed-off-by: Henri Chain <henri.chain@eleves.ec-nantes.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add reset to fbtft_init_display_dt()

When an init sequence is present in the Device Tree,
fbtft_init_display_dt() is used to initialize the display.
Add missing reset function call and activation of
chip select for parallel bus.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Fix spacing coding style issue

This patch fixes the following checkpatch.pl error:

CHECK:SPACING at line 318.

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Fix parenthesis alignment coding style issue

This patch fixes the following checkpatch.pl error:

CHECK:PARENTHESIS_ALIGNMENT at line 217.

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Remove unnecessary multiple blank lines

This patch removes some unnecessary multiple blank lines to fix the
following checkpatch errors:

CHECK:LINE_SPACING at lines 29, 67, 131, 287, 299, 312, 326, 351 and
364.

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Remove paragraph about writing to FSF

Remove paragraph about writing to the Free Software Foundation's
mailing address from GPL notice.
This patch fixes the following checkpatch error:

CHECK:FSF_MAILING_ADDRESS at line 17.

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix random hangs with network stress in visornic

We learned that it was possible for the core networking code to call
visornic_xmit() within ISR context, resulting in the need for us to
use spin_lock_irqsave() / spin_lock_irqrestore() to lock accesses to our
virtual device channels.

Without the correct locking added in this patch, random hangs would occur
on typical kernels while stressing the netork.  When using a kernel with
CONFIG_DEBUG_SPINLOCK=y, a stackdump would occur at the time of the hang
reporting:

    BUG: spinlock recursion on CPU#0, vnic_incoming/<pid>

(see below for more details)

We considered the possibility of adding a protocol between a visordriver
and visorbus where the visordriver could specify which type of locking it
required for its virtual device channels (essentially indicating whether
or not it was possible for the channel to be accessed in ISR context), but
decided this extra complexity was NOT needed, and that channel queues
should always be accessed with the most-stringent locking.  So that is
what is implemented in this commit.

Below is an example stackdump illustrating the spinlock recursion that is
fixed by this commit.  Note that we are first in virtnic_rx() writing to
the device channel when an APIC timer interrupt occurs.  Within the core
networking code, net_rx_action() calls process_backlog(), which eventually
lands up back up in virtnic_xmit() in the code attempting to also write to
the device channel.

    BUG: spinlock recursion on CPU#0, vnic_incoming/262
     lock: 0xffff88002db810c0, .magic: dead4ead, .owner: vnic_incoming/262,
                               .owner_cpu: 0
    CPU: 0 PID: 262 Comm: vnic_incoming
                    Tainted: G         C      4.2.0-rc1-ARCH+ #56
    Hardware name: Dell Inc. PowerEdge T110/ , BIOS 1.23 12/15/2009
     ffff8800216ac200 ffff88002c803388 ffffffff81476364 0000000000000106
     ffff88002db810c0 ffff88002c8033a8 ffffffff8109e2bc ffff88002db810c0
     ffffffff817631d4 ffff88002c8033c8 ffffffff8109e330 ffff88002db810c0
    Call Trace:
     <IRQ>  [<ffffffff81476364>] dump_stack+0x4f/0x73
     [<ffffffff8109e2bc>] spin_dump+0x7c/0xc0
     [<ffffffff8109e330>] spin_bug+0x30/0x40
     [<ffffffff8109e547>] do_raw_spin_lock+0x127/0x140
     [<ffffffff8147bad0>] _raw_spin_lock+0x40/0x50
     [<ffffffffa0151fa6>] ? visorchannel_signalinsert+0x46/0x70 [visorbus]
     [<ffffffffa0151fa6>] visorchannel_signalinsert+0x46/0x70 [visorbus]
     [<ffffffffa01683a2>] visornic_xmit+0x302/0x5d0 [visornic]
     [<ffffffff813b2f30>] dev_hard_start_xmit+0x2e0/0x510
     [<ffffffff813b2b75>] ? validate_xmit_skb+0x235/0x310
     [<ffffffff813d79e7>] sch_direct_xmit+0xf7/0x1d0
     [<ffffffff813b34d3>] __dev_queue_xmit+0x203/0x640
     [<ffffffff813b3320>] ? __dev_queue_xmit+0x50/0x640
     [<ffffffff813f3f6f>] ? ip_finish_output+0x1df/0x310
     [<ffffffff813b3933>] dev_queue_xmit_sk+0x13/0x20
     [<ffffffff813f3a5c>] ip_finish_output2+0x22c/0x470
     [<ffffffff813f3f6f>] ? ip_finish_output+0x1df/0x310
     [<ffffffff810987e0>] ? __lock_is_held+0x50/0x70
     [<ffffffff813f3f6f>] ip_finish_output+0x1df/0x310
     [<ffffffff813f4c31>] ip_output+0xb1/0x100
     [<ffffffff813f41be>] ip_local_out_sk+0x3e/0x80
     [<ffffffff813f4388>] ip_queue_xmit+0x188/0x4a0
     [<ffffffff813f4200>] ? ip_local_out_sk+0x80/0x80
     [<ffffffff8139fcd6>] ? __alloc_skb+0x86/0x1e0
     [<ffffffff8140bd5b>] tcp_transmit_skb+0x4cb/0x9c0
     [<ffffffff8139f0dc>] ? __kmalloc_reserve+0x3c/0x90
     [<ffffffff8139fcea>] ? __alloc_skb+0x9a/0x1e0
     [<ffffffff8140c47d>] tcp_send_ack+0x10d/0x150
     [<ffffffff814060ee>] __tcp_ack_snd_check+0x5e/0x90
     [<ffffffff81408eb4>] tcp_rcv_established+0x354/0x710
     [<ffffffff81412182>] tcp_v4_do_rcv+0x162/0x3f0
     [<ffffffff81414412>] tcp_v4_rcv+0xb22/0xb50
     [<ffffffff813ee2bc>] ? ip_local_deliver_finish+0x4c/0x2d0
     [<ffffffff813ee350>] ip_local_deliver_finish+0xe0/0x2d0
     [<ffffffff813ee2bc>] ? ip_local_deliver_finish+0x4c/0x2d0
     [<ffffffff813ee72e>] ip_local_deliver+0xae/0xc0
     [<ffffffff813edeaf>] ip_rcv_finish+0x14f/0x510
     [<ffffffff813aab2d>] ? __netif_receive_skb_core+0x9d/0xb70
     [<ffffffff813eea13>] ip_rcv+0x2d3/0x3b0
     [<ffffffff81097110>] ? cpuacct_css_alloc+0xb0/0xb0
     [<ffffffff813ab0f3>] __netif_receive_skb_core+0x663/0xb70
     [<ffffffff813aab2d>] ? __netif_receive_skb_core+0x9d/0xb70
     [<ffffffff810971a9>] ? cpuacct_charge+0x99/0xb0
     [<ffffffff81097110>] ? cpuacct_css_alloc+0xb0/0xb0
     [<ffffffff810987e0>] ? __lock_is_held+0x50/0x70
     [<ffffffff813ab72c>] ? process_backlog+0xbc/0x150
     [<ffffffff813ab78b>] ? process_backlog+0x11b/0x150
     [<ffffffff813ab627>] __netif_receive_skb+0x27/0x70
     [<ffffffff813ab702>] process_backlog+0x92/0x150
     [<ffffffff813afffd>] net_rx_action+0x13d/0x350
     [<ffffffff81036b2d>] ? lapic_next_event+0x1d/0x30
     [<ffffffff81058694>] __do_softirq+0x104/0x320
     [<ffffffff810c0788>] ? hrtimer_interrupt+0xc8/0x1a0
     [<ffffffff81074e70>] ? blocking_notifier_chain_cond_register+0x70/0x70
     [<ffffffff81058ab9>] irq_exit+0x79/0xa0
     [<ffffffff8147ecca>] smp_apic_timer_interrupt+0x4a/0x60
     [<ffffffff8147d2c8>] apic_timer_interrupt+0x68/0x70
     <EOI>  [<ffffffff81271c02>] ? __memcpy+0x12/0x20
     [<ffffffffa01517da>] ? visorchannel_write+0x4a/0x80 [visorbus]
     [<ffffffffa0151eb8>] signalinsert_inner+0x88/0x130 [visorbus]
     [<ffffffffa0151fb5>] visorchannel_signalinsert+0x55/0x70 [visorbus]
     [<ffffffffa0166e57>] visornic_rx+0x12e7/0x19d0 [visornic]
     [<ffffffffa01677c9>] process_incoming_rsps+0x289/0x690 [visornic]
     [<ffffffff814771c5>] ? preempt_schedule+0x25/0x30
     [<ffffffff81001026>] ? ___preempt_schedule+0x12/0x14
     [<ffffffff81093080>] ? wait_woken+0x90/0x90
     [<ffffffffa0167540>] ? visornic_rx+0x19d0/0x19d0 [visornic]
     [<ffffffffa0167540>] ? visornic_rx+0x19d0/0x19d0 [visornic]
     [<ffffffff81073a39>] kthread+0xe9/0x110
     [<ffffffff81073950>] ? __init_kthread_worker+0x70/0x70
     [<ffffffff8147c89f>] ret_from_fork+0x3f/0x70
     [<ffffffff81073950>] ? __init_kthread_worker+0x70/0x70

Fixes: b12fdf7da ('staging: unisys: rework signal remove/insert to avoid sparse lock warnings')
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Lock visorchannels associated with devices

A visorchannel associated with a device should have its writing to
the channel protected by a lock.

Fixes: b32c4997c ('staging: unisys: Move channel creation up the stack')
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Reduce indent

Remove some extra tabs in order to improve readalibility.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Use kzalloc instead of kmalloc/memset

This patch turns a kmalloc/memset into an equivalent kzalloc.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix random memory corruption in visorchannel_write()

visorchannel_write() and it's user visorbus_write_channel() are
exported, so all visorbus function drivers (i.e., drivers that call
visorbus_register_visor_driver()) are potentially affected by the bug.

Because of pointer-arithmetic rules, the address being written to in the
affected code was actually at byte offset:

    sizeof(struct channel_header) * offset

instead of just <offset> bytes as intended.

The bug could cause some very difficult-to-diagnose symptoms.  The
particular problem that led me on this chase was a kernel fault that
would occur during 'insmod visornic' after a previous 'rmmod visornic',
where we would fault during netdev_register_kobject() within
pm_runtime_set_memalloc_noio() while traversing a device list, which
occurred because dev->parent for the visorbus device had become
corrupted.

Fixes: 0abb60c1c ('staging: unisys: visorchannel_write(): Handle...')
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: correctly NULL-terminate visorbus sysfs attribute array

I'm not sure what adverse runtime effects the previously-omitted
NULL-termination would cause, but the code was definitely wrong.

Fixes: 795731627c ('staging: unisys: Clean up device sysfs attributes')
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix broken build when ARCH=um

When building with ARCH=um you get the following error:

arch/x86/include/asm/cpufeature.h:252:42: error: 'REQUIRED_MASK0'
undeclared

The Unisys drivers should not be compiled for UML, so this patch addresses
that by adding a dependency to kconfig for !UML.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Allow visorbus to autoload

We inadvertently remove the MODULE_DEVICE_TABLE line for visorbus,
this patch adds it back in.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Fixes: d5b3f1dccee4 ('staging: unisys: move timskmod.h functionality')
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: prevent erroneous kfree of devdata pointer

A struct visornic_devdata for each visornic device is actually allocated as
part of alloc_etherdev(), here in visornic_probe():

    netdev = alloc_etherdev(sizeof(struct visornic_devdata));

But code in devdata_release() was treating devdata as a pointer that needed
to be kfree()d!  This was causing all sorts of weird behavior after doing
an rmmod of visornic, both because free_netdev() was actually freeing the
memory used for devdata, and because devdata wasn't pointing to
dynamically-allocated memory in the first place.

The kfree(devdata) and the kref that tracked devdata's usage have been
appropriately deleted.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: use preferred interface for setting netdev's parent

Just switch this line so it uses the correct function call.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: delay start of worker thread until netdev created

This only makes sense, since the worker thread depends upon the netdev
existing.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: don't destroy global workqueues until devs destroyed

visornic_cleanup() was previously incorrectly destroying its global
workqueues prior to cleaning up the devices which used them.  This patch
corrects the order of these operations.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: correctly clean up device on removal

visornic_remove() is called to logically detach the visornic driver from a
visorbus-supplied device, which can happen either just prior to a
visorbus-supplied device disappearing, or as a result of an rmmod of
visornic.  Prior to this patch, logic was missing to properly clean up for
this removal, which was fixed via the following changes:

* A going_away flag is now used to interlock between device destruction and
  workqueue operations, protected by priv_lock.  I.e., setting
  going_away=true under lock guarantees that no new work items can get
  queued to the work queues.  going_away=true also short-circuits other
  operations to enable device destruction to proceed.

* Missing clean-up operations for the workqueues, netdev, debugfs entries,
  and the worker thread were added.

* Memory referenced from the visornic private devdata struct is now freed
  as part of devdata destruction.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: correct obvious double-allocation of workqueues

Looks like an errant patch fitting caused us to redundantly allocate the
workqueues at both the beginning and end of visornic_init().  This was
corrected by removing the allocations at the beginning.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Fixes: 68905a14e49c ('staging: unisys: Add s-Par visornic ethernet driver')
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: add error messages to visornic

Add error message to genuine rare error paths, and debug messages
to enable relatively non-verbose tracing of code paths

You can enable debug messages by including this on the kernel command line:

    visornic.dyndbg=+p

or by this from the command line:

    echo "module visornic +p" > <debugfs>/dynamic_debug/control

Refer to Documentation/dynamic-debug-howto.txt for more details.

In addition to the new debug and error messages, a message like the
following will be logged every time a visornic device is probed, which
will enable you to map back-and-forth between visorbus device names
(e.g., "vbus2:dev0") and netdev names (e.g., "eth0"):

    visornic vbus2:dev0: visornic_probe success netdev=eth0

With this patch and visornic debugging enabled, you should expect to see
messages like the following in the most-common scenarios:

* driver loaded:

      visornic_init

* device probed:

      visornic vbus2:dev0: visornic_probe
      visor_thread_start
      visor_thread_start success

* network interface configured (ifconfig):

      net eth0: visornic_open
      net eth0: visornic_enable_with_timeout
      net eth0: visornic_enable_with_timeout success
      net eth0: visornic_open success

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: neglect to NULL rcvbuf pointer

Neglect to NULL rcvbuf pointer array could result in faults later

This problem would exhibit itself as a fault when when attempting to stop
any visornic device (i.e., in visornic_disable_with_timeout() or
visornic_serverdown_complete()) that had never been started (i.e., for
which init_rcv_bufs() had never been called).  Because the array of rcvbuf
was never cleared to NULLs, we would mistakenly attempt to call kfree_skb()
on garbage memory.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: prevent faults in visornic_pause

Prevent faults in visornic_pause, visornic_resume(), and visornic_remove()

Prior to this patch, any call to visornic_pause(), visornic_resume(), or
visornic_remove() would fault, due to dev_set_drvdata() never having been
called to stash our struct visornic_devdata * into the device's drvdata.
I.e., all calls to dev_get_drvdata() were returning NULL, meaning a fault
was soon to follow.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: correct visornic_pause

Correct visornic_pause() to indicate completion asynchronously rather
than in-line

Previously, visornic_pause() (called to stop the device due to IOVM service
partition recovery) was calling the passed complete_func() in-line, rather
than delaying the calling until after the device had actually been stopped.

The behavior has been corrected so that the calling of the complete_func()
is now delayed until after the stopping of the device has been completed in
visornic_serverdown_complete(), which runs asynchronously via the workqueue
visornic_serverdown_workqueue.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: prevent faults processing messages

Prevent faults processing messages for devices that no driver has yet
registered to handle.

Previously, code of the form:

    drv = to_visor_driver(dev->device.driver);
    if (!drv)
        goto away;

was not having the desired intent, because to_visor_driver() was
essentially returning garbage if its argument was NULL.  The only existing
case of this is in initiate_chipset_device_pause_resume(), which is called
during IOVM service partition recovery.  We were thus faulting when IOVM
service partition recovery was initiated on a bus that had at least one
device for which no function driver had registered
(visorbus_register_visor_driver).

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: respond to msgs post device_create

Fix problem that prevents us from responding to any device message after
device_create.

By neglecting to NULL out pending_msg_hdr after the device_create response,
we were effectively preventing any subsequent messages to the device from
working, because device_epilog() will correctly bail out early if it sees
that pending_msg_hdr is still set non-NULL, as that is an indicator to mean
that an unanswered message is still outstanding.

This problem was discovered as part of testing IOVM service partition
recovery, because device_epilog() was in fact bailing out when it was
called from my_device_changestate(), which of course prevented us from
transitioning the device to the paused state.  However, the incorrect
behavior would occur for ANY subsequent command directed at the device,
not just for changestate.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: ddk750_dvi.h: Fix brace coding style issue

This is a patch to the ddk750_dvi.h file that fixes up a brace error
found by the checkpatch.pl tool

Signed-off-by: Anders Fridlund <anders.fridlund@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: coding style global ERROR fixes

kernel coding style fixes for below messages from
scripts/checkpatch.pl

ERROR: do not initialise globals to 0 or NULL

Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: add required spaces around C operators

Add spaces according to checkpatch.pl messages:
"ERROR: spaces required around that '=' (ctx:VxV)"
"ERROR: need consistent spacing around '-' (ctx:WxV)"
"ERROR: spaces required around that '?' (ctx:VxE)"
"ERROR: need consistent spacing around '&' (ctx:VxW)"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix open brace in function declaration

Fix according to checkpatch.pl message:
"ERROR: open brace '{' following function declarations go on the next line"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove assignment from if condition

Remove assignment from if condition according to checkpatch.pl message:
"ERROR: do not use assignment in if condition"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix 'switch and case' indentation

Fix according to checkpatch.pl message:
"ERROR: switch and case should be at the same indent"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix indentation in 'else' statements

Fix indentation according to checkpatch.pl message:
"ERROR: space required after that close brace '}'"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: put open brace on the previous line

Fix open braces according to checkpatch.pl message:
"ERROR: that open brace { should be on the previous line"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix indentation of pointer operator

Fix indentation of pointer operator '*' according to checkpatch.pl message:
"ERROR: 'foo* bar' should be 'foo *bar' "

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: insert space before open parenthesis

Insert spaces before '(' according to checkpatch.pl message:
"ERROR: space required before the open parenthesis"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: insert space between ')' and '{'

Insert spaces according to checkpatch.pl message:
"ERROR: space required before the open brace '{'"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove trailing whitespaces

Remove trailing whitespaces according to checkpatch.pl error message:
"ERROR: trailing whitespace"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace spaces with tabs

Replace spaces with tabs according to checkpatch.pl error message:
"ERROR: code indent should use tabs where possible"

Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove redundant __func__ in debug statement

This patch removes the redundant __func__ from dynamic debug prints as
the pr_xxx set of functions can be dynamically controlled to include
function name.Also fix a typo in debug statement.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Comedi: comedi_fops: Fixed the return error code

This patch fixes the checkpatch.pl warning:

WARNING: ENOSYS means 'invalid syscall nr' and nothing else

try_module_get fails when the reference count of the module is not
allowed to be incremented ,and hence -ENXIO is returned indicating
no device or address.

[IA - combined two of santhosh's changes to the error return value!]

Signed-off-by: santhosh pai <santhosh.pai88@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use CAP_SYS_ADMIN instead of CAP_NET_ADMIN

If the "comedi" module has been loaded with the
"comedi_num_legacy_minors" module parameter set to a non-zero value,
some reserved comedi devices get created.  These can be attached to a
low-level comedi driver using the `COMEDI_DEVCONFIG` ioctl command,
which checks for the `CAP_SYS_ADMIN` capability.  Of course, the comedi
device needs to be opened before the ioctl command can be sent.  If the
comedi device is unattached, `comedi_open()` currently requires the
`CAP_NET_ADMIN` capability.  It makes more sense to just require the
`CAP_SYS_ADMIN` capability here, so change it.

For the curious, commit a8f80e8ff94e ("Networking: use CAP_NET_ADMIN
when deciding to call request_module") changed this capability from
`CAP_SYS_MODULE` to `CAP_NET_ADMIN`, even though it doesn't seem
relevant here.  The original `CAP_SYS_MODULE` capability was due to the
function having some code to request a module using a "char-major-%i-%i"
alias, but that was never compiled in and was removed by commit
f30f2c2d417b ("staging: comedi: remove check for CONFIG_KMOD").

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: add external analog output ranges

The analog output range is not programmable, but the ranges for each of
the two analog output channels are settable via jumpers.  These jumper
settings are not readable by the driver.  The driver
provides a range table containing all the possible internal ranges
(+/-10V, +/-5V, 0-10V, 0-5V) to provide information to the user
application (although any range selected by the application that differs
from the jumper settings will not produce the expected voltage output).

The range table does not cover all possible ranges of the analog output
channels.  The jumpers also allow an external reference voltage between
0 and 10V to be used as bipolar or unipolar output range.  Add a couple
more ranges to the end of the range table to define these two external
ranges.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Grammar s/Enable support a/Enable support for a/

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix cast warning in comedi_compat32.c

This patch fixes the following sparse warning:

drivers/staging/comedi/comedi_compat32.c:205:16: warning: cast removes
address space of expression

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: fix lines over 80 characters

Warnings found by checkpatch.pl
WARNING: line over 80 characters
/drivers/staging/comedi/drivers/das16m1.c:414
+   if (devpriv->adc_count == 0 && hw_counter == devpriv->initial_hw_count) {

/drivers/staging/comedi/drivers/das16m1.c:417
/drivers/staging/comedi/drivers/das16m1.c:418
/drivers/staging/comedi/drivers/das16m1.c:419
/drivers/staging/comedi/drivers/das16m1.c:420
/drivers/staging/comedi/drivers/das16m1.c:421

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: no space before tabs

Warning found by checkpatch.pl
WARNING: please, no space before tabs
/drivers/staging/comedi/drivers/das16m1.c:83
+  404-407 ^I8254$

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: s626: Simplify a trivial if-return sequence

This patch simplify a trivial if-return sequence. Possibly combine with
a preceding function call.

Signed-off-by: Abdul Hussain <habdul@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: ni_daq_dio24: Simplify a trivial if-return sequence

This patch simplify a trivial if-return sequence. Possibly combine with
a preceding function call.

Signed-off-by: Abdul Hussain <habdul@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: dac02: Simplify a trivial if-return sequence

This patch simplify a trivial if-return sequence. Possibly combine with
a preceding function call.

Signed-off-by: Abdul Hussain <habdul@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: fl512: Simplify a trivial if-return sequence

This patch simplify a trivial if-return sequence. Possibly combine with
a preceding function call.

Signed-off-by: Abdul Hussain <habdul@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: dmm32at: Simplify a trivial if-return sequence

This patch simplify a trivial if-return sequence. Possibly combine with
a preceding function call.

Signed-off-by: Abdul Hussain <habdul@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08_cs: don't split Author string

fixes checkpatch.pl WARNING: quoted string split across lines

+MODULE_AUTHOR("David A. Schleef <ds@schleef.org>, "
+             "Frank Mori Hess <fmhess@users.sourceforge.net>");

Modules with multiple authors have a MODULE_AUTHOR line for each one.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion_chunk_heap.c: Fixed line over 80 characters

Simple style fix.

Signed-off-by: Guillermo O. Freschi <kedrot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: reorder variable definitions

Prevents false positive "missing empty line after a definition"
checkpatch warning.

Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Deletion of unnecessary checks before three function calls

The following functions test whether their argument is NULL and then
return immediately.
* kfree
* ll_file_data_put
* ptlrpc_connection_put

Thus the test around such calls is not needed.

This issue was detected by using the Coccinelle software.

See also a previous update suggestion:
"remove unneeded null test before free" by Julia Lawall
https://lkml.org/lkml/2015/5/1/498
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg878600.html

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix whitespace coding style issues in libcfs/module.c

This is a patch to the libcfs/module.c file fixing whitespace warnings
found by checkpatch.pl.

Signed-off-by: Lukasz Janyst <lj@buggybrain.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: Fix kstrtouint return value check fix

Apparently kstrtouint could return not just -EINVAL, but also -ERANGE,
so make sure we just check the return value for something negative.

Noticed by Dan Carpenter <dan.carpenter@oracle.com>

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: remove unused portal_enter_debugger variable

Remove portal_enter_debugger because it's not used any more.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: get rid of debugfs/lnet/console_{min, max}_delay_centisecs

They are just fancy module parameters wrappers,
so just the same functionality now would be accessible via
/sys/module/libcfs/parameters/libcfs_console_{min,max}_delay

Also install compatibility symlinks

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: get rid of debugfs/lnet/debug_mb

It's just a fancy libcfs_debug_mb module parameter wrapper,
so just add debug buffer size check and resizing and the same
functionality now would be accessible via
/sys/module/libcfs/parameters/libcfs_debug_mb

Also add a symlink for backwards compatibility.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: move assignment out of conditional

Found by checkpatch.pl

Signed-off-by: Perry Hooker <perry.hooker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: fixed a blank line after declarations coding style issue

Fixed a blank line after declarations coding style issue

Signed-off-by: Ronit Halder <ronit.crj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: obdclass: genops: fixed brace coding style issues

Fixed several brace coding style issues.

Signed-off-by: Kris Baumann <krisbaumann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: fix "space required after that ', '" error in cl_page.c

This is a patch to the cl_page.c file that fixes a
"space required after that ','" error found by the checkpatch.pl tool.

Signed-off-by: Anders Fridlund <anders.fridlund@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: make ptlrpc_init static

fix sparse warning in lustre/ptlrpc/ptlrpc_module.c:54:12:
     warning: symbol 'ptlrpc_init' was not declared. Should it be static?

The __init macro is moved before the function name to match standard usage.

Signed-off-by: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove dead code

This patch removes commented code.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>