Mark Brown [Tue, 27 Dec 2011 14:16:09 +0000 (14:16 +0000)]
video: s3c-fb: Disable runtime PM in error paths from probe
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Mark Brown [Tue, 27 Dec 2011 14:16:08 +0000 (14:16 +0000)]
video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer
The s3c-fb driver has a function called s3c_fb_enable() which turns on
and off the physical output. However it is only actually used in paths
which disable the screen, the enabling just writes to the register. Make
the code less confusing by ensuring that the enable also goes through
the same path.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Mark Brown [Tue, 27 Dec 2011 14:16:07 +0000 (14:16 +0000)]
video: s3c-fb: Make runtime PM functional again
The change in "video: s3c-fb: modify runtime pm functions" (commit
35784b) renders the runtime power management for the device completely
ineffectual as while it leaves runtime power management notionally
enabled a runtime power reference is held for the entire time the device
is registered meaning it will never actually do anything.
A further issue is introduced as runtime power management is added
during the system suspend path which is not something which drivers are
supposed to do and would interact poorly if there were any operations
done in the runtime power management callbacks.
While this does make things simpler (the main motivation for the
original change) it will not only cause us to use more power in the
framebuffer controller but will also prevent us entering lower power
domain and SoC wide states as we can never power down the domain
containing the device. Since neither of these things is desirable
revert the change.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Mon, 19 Dec 2011 22:26:18 +0000 (16:26 -0600)]
drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory()
Functions fsl_diu_alloc() and fsl_diu_free() were only being called by
map_video_memory() and unmap_video_memory(), respectively.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Mon, 19 Dec 2011 22:26:17 +0000 (16:26 -0600)]
drivers/video: fsl-diu-fb: add default platform ops functions
The DIU driver requires some platform-specific functions to be defined,
but two them can be optional because most platforms implement them the
same way. Functions set_gamma_table() and get_pixel_format() are only
needed because of quirks in the Freescale MPC8610 HPCD reference board.
For other boards, a generic implementation works, so we shouldn't
require the platform code to define them.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Mon, 19 Dec 2011 22:26:16 +0000 (16:26 -0600)]
drivers/video: fsl-diu-fb: remove broken reference count enabling the display
The functions enable_lcdc() and disable_lcdc() used the variable fb_enable
to keep a reference count of when the display is enabled, but the code is
broken. The display is always disabled when disable_lcdc(), and it is
always enabled when enable_lcdc() is called, regardless of the value of
fb_enable. Obviously, we don't need to keep a reference count, so just
remove the variable.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Mon, 19 Dec 2011 22:26:15 +0000 (16:26 -0600)]
drivers/video: fsl-diu-fb: set correct framebuffer flags
The DIU uses system RAM for the framebuffer, so FBINFO_VIRTFB should be set.
Since the framebuffer is in system RAM, it can be read from more quickly
than written to, so FBINFO_READS_FAST should be set.
We can also set FBINFO_PARTIAL_PAN_OK for the same reasons.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Mon, 19 Dec 2011 22:26:14 +0000 (16:26 -0600)]
drivers/video: fsl-diu-fb: merge init_fbinfo() into install_fb()
Function init_fbinfo() is called only from install_fb(), and it's only a few
lines long. Plus, it ignores the return code from fb_alloc_cmap(). Merge
its contents into install_fb() and handle errors properly.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Laurent Pinchart [Tue, 20 Dec 2011 19:00:11 +0000 (20:00 +0100)]
fbdev: matroxfb: Fix compilation after fb_var_screeninfo change
Commit
fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
modified the layout of the fb_var_screeninfo structure. Remove zero
fields from the static initializers in the matroxfb driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Ondrej Zary [Mon, 19 Dec 2011 22:39:47 +0000 (23:39 +0100)]
s3fb: fix Virge/VX
Add memory size detection for Virge/VX and small delay in mode setting (same
as in X.org driver) to fix blank screen problem.
Also adjust DTPC position to fix garbled screen in some modes (tested that
this adjustment does not break other cards - at least Trio32, Trio64V+,
Trio64V2/DX, Virge, Virge/DX).
Tested on ELSA Winner 2000AVI/3D.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Marek Vasut [Mon, 19 Dec 2011 15:37:59 +0000 (16:37 +0100)]
MXSFB: Fix driver registration
The driver should be registered with mxsfb_driver, not with mxsfb_devtype.
This caused obvious null pointer dereference and crash.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Huang Shijie <b32955@freescale.com>
Acked-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Jingoo Han [Mon, 19 Dec 2011 02:09:35 +0000 (11:09 +0900)]
MAINTAINERS: add a maintainer for Samsung Framebuffer driver
Add a maintainer for Samsung Framebuffer driver.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Rusty Russell [Thu, 15 Dec 2011 03:03:56 +0000 (13:33 +1030)]
i810: fix module_param bool abuse.
The driver says "module_param(ddc3, bool, 0);". But it's not a used
as a bool, it's used as a count.
Make it a bool.
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Axel Lin [Fri, 9 Dec 2011 02:01:15 +0000 (10:01 +0800)]
video: pnx4008: convert drivers/video/pnx4008/* to use module_platform_driver()
This patch converts the drivers in drivers/video/pnx4008/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Grigory Tolstolytkin <gtolstolytkin@ru.mvista.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Axel Lin [Fri, 9 Dec 2011 01:57:53 +0000 (09:57 +0800)]
video: convert mbxfb to use module_platform_driver()
This patch converts mbxfb to use the module_platform_driver() macro
which makes the code smaller and a bit simpler.
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Laurent Pinchart [Tue, 13 Dec 2011 13:02:28 +0000 (14:02 +0100)]
fbdev: sh_mobile_lcdc: Support FOURCC-based format API
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Laurent Pinchart [Tue, 13 Dec 2011 13:02:27 +0000 (14:02 +0100)]
v4l: Add V4L2_PIX_FMT_NV24 and V4L2_PIX_FMT_NV42 formats
NV24 and NV42 are planar YCbCr 4:4:4 and YCrCb 4:4:4 formats with a
luma plane followed by an interleaved chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Laurent Pinchart [Tue, 13 Dec 2011 13:02:26 +0000 (14:02 +0100)]
fbdev: Add FOURCC-based format configuration API
This API will be used to support YUV frame buffer formats in a standard
way.
Last but not least, create a much needed fbdev API documentation and
document the format setting APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Thu, 8 Dec 2011 23:27:31 +0000 (17:27 -0600)]
drivers/video: fsl-diu-fb: rename "machine_data" to "data"
"machine_data" is too long and clunky, and the "machine" part doesn't make
much sense, anyway.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Jingoo Han [Thu, 8 Dec 2011 09:08:00 +0000 (18:08 +0900)]
video: s3c-fb: add shadow register protect
Shadow registers should be protectd whenever the registers are
updated. Shadow registers are updated after SHADOWCON shadow
register is cleared.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Jingoo Han [Mon, 5 Dec 2011 02:42:46 +0000 (11:42 +0900)]
video: s3c-fb: modify runtime pm functions
Runtime suspend and runtime resume are modified in order to
reduce the complexity and improve the usability of runtime pm.
After probe function, s3c-fb driver is not suspended until
suspend or remove is called.
The scheme is changed as follows:
runtime_get is only called in probe and resume.
runtime_put is only called in remove and suspend.
open/close cannot call the runtime_get/put.
Also, runtime_susepnd/resume are just called by runtime pm,
not doing suspend/resume routine any longer. This is because
open/close cannot call the runtime_get/put; the suspend/resume
routine in runtime_suspend/resume were previously used when
open and close were called.
The name of s3c-fb dev_pm_ops is changed from s3cfb_pm_ops to
s3c_fb_pm_ops in order to use more consistent naming.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Timur Tabi [Fri, 2 Dec 2011 23:03:27 +0000 (17:03 -0600)]
drivers/video: fsl-diu-fb: merge all allocated data into one block
The Freescale DIU driver allocates multiple blocks of memory, including
multiple DMA buffers. Merge all of these blocks into one data structure.
Specifically:
1) struct fsl_diu_data now contains everything that needs to be allocated,
except for the framebuffers themselves. DMA'able objects are aligned correctly
within the structure.
2) struct diu_addr is no longer needed, because we don't have to manage
multiple blocks of DMA memory.
3) Since there's no diu_addr any more, macro DMA_ADDR is used to calculate
the DMA address of any field in fsl_diu_data.
4) Functions allocate_buf() and free_buf() are no longer needed, because we
now assume that dma_alloc_coherent() will allocate a page-aligned block,
and everything is properly aligned with fsl_diu_data already, so we no longer
need to align any memory blocks ourselves.
5) The "dummy" area descriptor is now defined separately from the other
five ADs, so NUM_AOIS (previously called FSL_AOI_NUM) is now set to five
instead of six. Previously, all six were combined together to avoid a
separate call to allocate_buf() just for the dummy AD.
6) framebuffer_alloc() and framebuffer_release() are no longer used. The
framebuffer is initialized manually.
7) Error handling is simplified since there's only one memory buffer
allocated.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Jingoo Han [Fri, 2 Dec 2011 10:07:17 +0000 (19:07 +0900)]
video: s3c-fb: set missing bitmask of enabled hardware window
This patch set missing bitmask of enabled hardware window which
should be checked whenever the hardware window is enabled.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Florian Tobias Schandinat [Sat, 17 Dec 2011 22:00:49 +0000 (22:00 +0000)]
Merge commit 'v3.2-rc6' into fbdev-next
Linus Torvalds [Sat, 17 Dec 2011 02:36:26 +0000 (18:36 -0800)]
Linux 3.2-rc6
Linus Torvalds [Fri, 16 Dec 2011 20:58:39 +0000 (12:58 -0800)]
Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"
This reverts commit
eb1711bb94991e93669c5a1b5f84f11be2d51ea1.
It blows up the i915 seqno tracking, resulting in the
BUG_ON(seqno == 0);
in i915_wait_request() triggering, which will cause lock-ups.
See for example
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010
https://lkml.org/lkml/2011/12/14/395
Reported-requested-and-tested-by: Dirk Hohndel <dirk@hohndel.org>
Reported-by: Richard Eames <Richard.Eames@flinders.edu.au>
Reported-by: Rocko Requin <rockorequin@hotmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 16 Dec 2011 20:26:26 +0000 (12:26 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32: Be less strict in matching %lo part of relocation.
sbus: convert drivers/sbus/char/* to use module_platform_driver()
bbc_i2c: Remove unneeded err variable
sparc: Use kmemdup rather than duplicating its implementation
Linus Torvalds [Fri, 16 Dec 2011 20:17:32 +0000 (12:17 -0800)]
Merge git://git./linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
sch_gred: should not use GFP_KERNEL while holding a spinlock
ipip, sit: copy parms.name after register_netdevice
ipv6: Fix for adding multicast route for loopback device automatically.
ssb: fix init regression with SoCs
rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition
mac80211: fix another race in aggregation start
fsl_pq_mdio: Clean up tbi address configuration
ppp: fix pptp double release_sock in pptp_bind()
net/fec: fix the use of pdev->id
ath9k: fix check for antenna diversity support
batman-adv: delete global entry in case of roaming
batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM
Bluetooth: Correct version check in hci_setup
btusb: fix a memory leak in btusb_send_frame()
Bluetooth: bnep: Fix module reference
Bluetooth: cmtp: Fix module reference
Bluetooth: btmrvl: support Marvell Bluetooth device SD8797
Linus Torvalds [Fri, 16 Dec 2011 20:15:50 +0000 (12:15 -0800)]
Merge branches 'for-linus' and 'for-linus-3.2' of git://git./linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: unplug every once and a while
Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
Btrfs: only set cache_generation if we setup the block group
Btrfs: don't panic if orphan item already exists
Btrfs: fix leaked space in truncate
Btrfs: fix how we do delalloc reservations and how we free reservations on error
Btrfs: deal with enospc from dirtying inodes properly
Btrfs: fix num_workers_starting bug and other bugs in async thread
BTRFS: Establish i_ops before calling d_instantiate
Btrfs: add a cond_resched() into the worker loop
Btrfs: fix ctime update of on-disk inode
btrfs: keep orphans for subvolume deletion
Btrfs: fix inaccurate available space on raid0 profile
Btrfs: fix wrong disk space information of the files
Btrfs: fix wrong i_size when truncating a file to a larger size
Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror
* 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: lower the dirty balance poll interval
Linus Torvalds [Fri, 16 Dec 2011 19:27:56 +0000 (11:27 -0800)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
drm/i915: enable semaphores on per-device defaults
drm/i915: don't set unpin_work if vblank_get fails
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
iommu: Export intel_iommu_enabled to signal when iommu is in use
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
drm/i915: prevent division by zero when asking for chipset power
drm/i915: add PCH info to i915_capabilities
drm/i915: set the right SDVO transcoder for CPT
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
drm/i915: Treat pre-gen4 backlight duty cycle value consistently
drm/i915: Hook up Ivybridge eDP
drm/i915: add multi-threaded forcewake support
Linus Torvalds [Fri, 16 Dec 2011 19:14:42 +0000 (11:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo
ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS
ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device
ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails
ASoC: WM8958: correctly show firmware magic on mismatch
ASoC: mxs: Add appropriate MODULE_ALIAS()
ASoC: mxs: Add missing MODULE_LICENSE("GPL")
ASoC: Fix WM8996 24.576MHz clock operation
ASoC: Include linux/module.h for smdk2443_wm9710
ASoC: Fix a typo in jive_wm8750
ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC
ASoC: Include linux/io.h for jz4740 codec
Linus Torvalds [Fri, 16 Dec 2011 19:13:49 +0000 (11:13 -0800)]
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
gpio: Fix DA9052 GPIO build errors.
gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121
gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip
gpio-ml-ioh: fix a bug in the interrupt handler
gpio: pl061: drop extra check for NULL platform_data
Linus Torvalds [Fri, 16 Dec 2011 18:07:50 +0000 (10:07 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: rx51: fix USB
ARM: OMAP: mcbsp: Fix possible memory corruption
arm/imx: fix power button on imx51 babbage board
ARM: imx: fix cpufreq build errors
ARM: mx5: add __initconst for fec pdata
MXC PWM: should active during DOZE/WAIT/DBG mode
ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
ARM: SAMSUNG: remove duplicated header include
Linus Torvalds [Fri, 16 Dec 2011 18:05:14 +0000 (10:05 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't kick empty queue in blk_drain_queue()
block/swim3: Locking fixes
loop: Fix discard_alignment default setting
cfq-iosched: fix cfq_cic_link() race confition
cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails
cciss: fix flush cache transfer length
cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
loop: fix loop block driver discard and encryption comment
block: initialize request_queue's numa node during
Wu Fengguang [Fri, 16 Dec 2011 17:32:57 +0000 (12:32 -0500)]
btrfs: lower the dirty balance poll interval
Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Adam Jackson [Tue, 13 Dec 2011 23:41:00 +0000 (15:41 -0800)]
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
Some active adaptors (VGA usually) only have two lanes at 2.7GHz.
That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc.
Fixes Asus UX31 panel being black at startup due to no valid modes since
dc22ee6fc18ce0f15424e753e8473c306ece95c1.
v2: Rebased to current code, resulting in the fix applying to EDP panels as
well. Also changed from spatio-temporal to just spatial dithering on
pre-ironlake, to be conssitent (and less visual flicker)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Tested-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Eugeni Dodonov [Sat, 10 Dec 2011 01:16:37 +0000 (17:16 -0800)]
drm/i915: enable semaphores on per-device defaults
This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.
For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.
v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: Ben Widawsky <ben@bwidawsk.net>
CC: Keith Packard <keithp@keithp.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Jesse Barnes [Mon, 29 Aug 2011 16:45:28 +0000 (09:45 -0700)]
drm/i915: don't set unpin_work if vblank_get fails
This fixes a race where we may try to finish a page flip and decrement
the refcount even if our vblank_get failed and we ended up with a
spurious flip pending interrupt.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 17 Nov 2011 06:24:52 +0000 (22:24 -0800)]
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
Eugeni Dodonov [Wed, 23 Nov 2011 18:42:14 +0000 (16:42 -0200)]
iommu: Export intel_iommu_enabled to signal when iommu is in use
In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Chris Wilson [Mon, 20 Jun 2011 13:45:50 +0000 (14:45 +0100)]
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.
Fixes the detection of the secondary SDVO LVDS panel on the Libretto
W105.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216
Signed-off-by: Keith Packard <keithp@keithp.com>
Eugeni Dodonov [Thu, 10 Nov 2011 15:55:15 +0000 (13:55 -0200)]
drm/i915: prevent division by zero when asking for chipset power
This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.
The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done
This is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.
This issue was also found independently by Konstantin Belousov
<kostikbel@gmail.com>, who proposed a similar patch.
Reported-by: Konstantin Belousov <kostikbel@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Paulo Zanoni [Fri, 14 Oct 2011 21:17:41 +0000 (18:17 -0300)]
drm/i915: add PCH info to i915_capabilities
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Paulo Zanoni [Fri, 14 Oct 2011 21:16:22 +0000 (18:16 -0300)]
drm/i915: set the right SDVO transcoder for CPT
v2: add a CPT-specific macro, make code cleaner
v3: fix commit message
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272
Cc: stable@kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adam Jackson [Mon, 28 Nov 2011 17:22:56 +0000 (12:22 -0500)]
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
https://bugzilla.redhat.com/show_bug.cgi?id=750006
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Olof Johansson [Fri, 16 Dec 2011 07:34:17 +0000 (23:34 -0800)]
Merge branch 'samsung-fixes-3' of git://git./linux/kernel/git/kgene/linux-samsung into fixes
Olof Johansson [Fri, 16 Dec 2011 04:58:37 +0000 (20:58 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap into fixes
Linus Torvalds [Thu, 15 Dec 2011 22:16:47 +0000 (14:16 -0800)]
Merge branch 'linux-next' of git://git./linux/kernel/git/konrad/ibft
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
ibft: Fix finding IBFT ACPI table on UEFI
Linus Torvalds [Thu, 15 Dec 2011 22:15:01 +0000 (14:15 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8712u: Add new USB ID
staging: tidspbridge: request dmtimer clocks on init
staging: tidspbridge: include module.h by default
Linus Torvalds [Thu, 15 Dec 2011 22:14:41 +0000 (14:14 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: option: Removing one bogus and adding some new Huawei combinations
USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
usb: option: Add Huawei E398 controlling interfaces
usb: renesas_usbhs: add hcd->has_tt for low/full speed
usb: renesas_usbhs: typofix: irq_dtch control DTCHE
usb: gadget: storage: release superspeed descriptors.
Uwe Kleine-König [Thu, 15 Dec 2011 20:47:56 +0000 (21:47 +0100)]
ARM: unwinder: fix bisection to find origin in .idx section
The bisection implemented in unwind_find_origin() stopped to early. If
there is only a single entry left to check the original code just took
the end point as origin which might be wrong.
This was introduced in commit
de66a979012d ("ARM: 7187/1: fix unwinding
for XIP kernels").
Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason [Thu, 15 Dec 2011 20:38:41 +0000 (15:38 -0500)]
Btrfs: unplug every once and a while
The btrfs io submission threads can build up massive plug lists. This
keeps things more reasonable so we don't hand over huge dumps of IO at
once.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tejun Heo [Thu, 15 Dec 2011 19:03:04 +0000 (20:03 +0100)]
block: don't kick empty queue in blk_drain_queue()
While probing, fd sets up queue, probes hardware and tears down the
queue if probing fails. In the process, blk_drain_queue() kicks the
queue which failed to finish initialization and fd is unhappy about
that.
floppy0: no floppy controllers found
------------[ cut here ]------------
WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0()
Hardware name: To Be Filled By O.E.M.
VFS: do_fd_request called on non-open device
Modules linked in:
Pid: 1, comm: swapper Not tainted
3.2.0-rc4-00077-g5983fe2 #2
Call Trace:
[<
ffffffff81039a6a>] warn_slowpath_common+0x7a/0xb0
[<
ffffffff81039b41>] warn_slowpath_fmt+0x41/0x50
[<
ffffffff813d657f>] do_fd_request+0xbf/0xd0
[<
ffffffff81322b95>] blk_drain_queue+0x65/0x80
[<
ffffffff81322c93>] blk_cleanup_queue+0xe3/0x1a0
[<
ffffffff818a809d>] floppy_init+0xdeb/0xe28
[<
ffffffff818a72b2>] ? daring+0x6b/0x6b
[<
ffffffff810002af>] do_one_initcall+0x3f/0x170
[<
ffffffff81884b34>] kernel_init+0x9d/0x11e
[<
ffffffff810317c2>] ? schedule_tail+0x22/0xa0
[<
ffffffff815dbb14>] kernel_thread_helper+0x4/0x10
[<
ffffffff81884a97>] ? start_kernel+0x2be/0x2be
[<
ffffffff815dbb10>] ? gs_change+0xb/0xb
Avoid it by making blk_drain_queue() kick queue iff dispatch queue has
something on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 15 Dec 2011 18:52:40 +0000 (10:52 -0800)]
Merge branch 'stable/for-linus-fixes-3.2' of git://git./linux/kernel/git/konrad/xen
* 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/swiotlb: Use page alignment for early buffer allocation.
xen: only limit memory map to maximum reservation for domain 0.
Chris Mason [Thu, 15 Dec 2011 18:43:49 +0000 (13:43 -0500)]
Merge branch 'for-chris' of git./linux/kernel/git/josef/btrfs-work into integration
Conflicts:
fs/btrfs/inode.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 15 Dec 2011 18:36:29 +0000 (13:36 -0500)]
Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
btrfs_update_inode is sometimes called with a null reservation.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Ashish Jangam [Thu, 15 Dec 2011 09:25:46 +0000 (14:55 +0530)]
gpio: Fix DA9052 GPIO build errors.
This patch is functionally tested on Samsung SMDKV6410.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[grant.likely: don't create an unnecessary header file]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Konrad Rzeszutek Wilk [Thu, 15 Dec 2011 16:28:46 +0000 (11:28 -0500)]
xen/swiotlb: Use page alignment for early buffer allocation.
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO
The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid which was to piggyback on git commit
e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment
for early buffer allocation" which:
We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.
So alloc them with page alignment at first, to avoid lose two pages
And doing that fixes the outstanding issue.
CC: stable@kernel.org
Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com>
Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Ian Campbell [Wed, 14 Dec 2011 12:16:08 +0000 (12:16 +0000)]
xen: only limit memory map to maximum reservation for domain 0.
d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.
For a guest booted with maxmem=512, memory=128 this results in:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen:
0000000000000000 -
00000000000a0000 (usable)
[ 0.000000] Xen:
00000000000a0000 -
0000000000100000 (reserved)
-[ 0.000000] Xen:
0000000000100000 -
0000000008100000 (usable)
-[ 0.000000] Xen:
0000000008100000 -
0000000020800000 (unusable)
+[ 0.000000] Xen:
0000000000100000 -
0000000020800000 (usable)
...
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range:
0000000000000000 -
0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range:
00000000000a0000 -
0000000000100000 (usable)
-[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
[ 0.000000] initial memory mapped : 0 -
027ff000
[ 0.000000] Base memory trampoline at [
c009f000] 9f000 size 4096
-[ 0.000000] init_memory_mapping:
0000000000000000-
0000000008100000
-[ 0.000000]
0000000000 -
0008100000 page 4k
-[ 0.000000] kernel direct mapping tables up to
8100000 @
27bb000-
27ff000
+[ 0.000000] init_memory_mapping:
0000000000000000-
0000000020800000
+[ 0.000000]
0000000000 -
0020800000 page 4k
+[ 0.000000] kernel direct mapping tables up to
20800000 @
26f8000-
27ff000
[ 0.000000] xen: setting RW the range
27e8000 -
27ff000
[ 0.000000] 0MB HIGHMEM available.
-[ 0.000000] 129MB LOWMEM available.
-[ 0.000000] mapped low ram: 0 -
08100000
-[ 0.000000] low ram: 0 -
08100000
+[ 0.000000] 520MB LOWMEM available.
+[ 0.000000] mapped low ram: 0 -
20800000
+[ 0.000000] low ram: 0 -
20800000
With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).
There is no change for dom0.
Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: stable@kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Josef Bacik [Tue, 13 Dec 2011 21:04:54 +0000 (16:04 -0500)]
Btrfs: only set cache_generation if we setup the block group
A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache. This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up. We need to make sure we only set
cache_generation if we've done the truncate. The user tested this patch and
verified that the panic no longer occured. Thanks,
Reported-and-Tested-by: Klaus Bitto <klaus.bitto@gmail.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Tue, 13 Dec 2011 17:55:58 +0000 (12:55 -0500)]
Btrfs: don't panic if orphan item already exists
I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop. This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs. Then we come back later to do another
truncate and it blows up because we already have an orphan item. This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Fri, 9 Dec 2011 18:26:22 +0000 (13:26 -0500)]
Btrfs: fix leaked space in truncate
We were occasionaly leaking space when running xfstest 269. This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Fri, 9 Dec 2011 16:18:51 +0000 (11:18 -0500)]
Btrfs: fix how we do delalloc reservations and how we free reservations on error
Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved. This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such. The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for. The other problem is with our error handling
in the reservation code. There are two cases that we need to deal with
1) We raced with free. In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation. However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use. So as it stands the code was
doing this fine and it worked out, except in case #2
2) We don't race with free. Nobody comes in and changes anything, and our
reservation fails. In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything. So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.
Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex. We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things. With this patch my space leak scripts no longer
scream bloody murder. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Wed, 30 Nov 2011 15:45:38 +0000 (10:45 -0500)]
Btrfs: deal with enospc from dirtying inodes properly
Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC. This needs to be fixed in a few areas
1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty. So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.
2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't
setting ->setattr for symlinks, even though we should have been. This catches
one of the cases where we were getting errors in mark_inode_dirty.
3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty. This lets us return errors properly for truncate
and chown/anything related to setattr.
4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one. The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.
With this patch xfstests 83 complains a handful of times instead of hundreds of
times. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Fri, 18 Nov 2011 19:37:27 +0000 (14:37 -0500)]
Btrfs: fix num_workers_starting bug and other bugs in async thread
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff. First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this. Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker. Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.
People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Casey Schaufler [Thu, 15 Dec 2011 15:09:07 +0000 (10:09 -0500)]
BTRFS: Establish i_ops before calling d_instantiate
The Smack LSM hook for security_d_instantiate checks
the inode's i_op->getxattr value to determine if the
containing filesystem supports extended attributes.
The BTRFS filesystem sets the inode's i_op value only
after it has instantiated the inode. This results in
Smack incorrectly giving new BTRFS inodes attributes
from the filesystem defaults on the assumption that
values can't be stored on the filesystem. This patch
moves the assignment of inode operation vectors ahead
of the calls to d_instantiate, letting Smack know that
the filesystem supports extended attributes. There
should be no impact on the performance or behavior of
BTRFS.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 15 Dec 2011 14:29:43 +0000 (09:29 -0500)]
Btrfs: add a cond_resched() into the worker loop
If we have a constant stream of end_io completions or crc work,
we can hit softlockup messages from the async helper threads. This
adds a cond_resched() into the loop to avoid them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Li Zefan [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
Btrfs: fix ctime update of on-disk inode
To reproduce the bug:
# touch /mnt/tmp
# stat /mnt/tmp | grep Change
Change: 2011-12-09 09:32:23.
412105981 +0800
# chattr +i /mnt/tmp
# stat /mnt/tmp | grep Change
Change: 2011-12-09 09:32:43.
198105295 +0800
# umount /mnt
# mount /dev/loop1 /mnt
# stat /mnt/tmp | grep Change
Change: 2011-12-09 09:32:23.
412105981 +0800
We should update ctime of in-memory inode before calling
btrfs_update_inode().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Arne Jansen [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
btrfs: keep orphans for subvolume deletion
Since we have the free space caches, btrfs_orphan_cleanup also runs for
the tree_root. Unfortunately this also cleans up the orphans used to mark
subvol deletions in progress.
Currently if a subvol deletion gets interrupted twice by umount/mount, the
deletion will not be continued and the space permanently lost, though it
would be possible to write a tool to recover those lost subvol deletions.
This patch checks if the orphan belongs to a subvol (dead root) and skips
the deletion.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
Btrfs: fix inaccurate available space on raid0 profile
When we use raid0 as the data profile, df command may show us a very
inaccurate value of the available space, which may be much less than the
real one. It may make the users puzzled. Fix it by changing the calculation
of the available space, and making it be more similar to a fake chunk
allocation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
Btrfs: fix wrong disk space information of the files
Btrfsck report errors after the 83th case of xfstests was run, The error
number is 400, it means the used disk space of the file is wrong.
The reason of this bug is that:
The file truncation may fail when the space of the file system is not enough,
and leave some file extents, whose offset are beyond the end of the files.
When we want to expand those files, we will drop those file extents, and
put in dummy file extents, and then we should update the i-node. But btrfs
forgets to do it.
This patch adds the forgotten i-node update.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Thu, 15 Dec 2011 01:12:01 +0000 (20:12 -0500)]
Btrfs: fix wrong i_size when truncating a file to a larger size
Btrfsck report error 100 after the 83th case of xfstests was run, it means
the i_size of the file is wrong.
The reason of this bug is that:
Btrfs increased i_size of the file at the beginning, but it failed to expand
the file, and failed to update the i_size to the old size because there is no
enough space in the file system, so we found a wrong i_size.
This patch fixes this bug by updating the i_size just when we pass the file
expanding and get enough space to update i-node.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Takashi Iwai [Thu, 15 Dec 2011 11:56:04 +0000 (12:56 +0100)]
Merge branch 'fix/asoc' into for-linus
David Henningsson [Wed, 14 Dec 2011 07:52:30 +0000 (15:52 +0800)]
ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo
Several people with this chipset have reported inconsistent/sloppy
values for position reporting when the DMA position buffer is used,
and that setting position_fix=1 have fixed their problems.
BugLink: https://bugs.launchpad.net/bugs/825709
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 15 Dec 2011 03:45:40 +0000 (19:45 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms: add some new pci ids
Linus Torvalds [Thu, 15 Dec 2011 02:25:58 +0000 (18:25 -0800)]
Merge tag 'tytso-for-linus-
20111214' of git://git./linux/kernel/git/tytso/ext4
* tag 'tytso-for-linus-
20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: handle EOF correctly in ext4_bio_write_page()
ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized
ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()
ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
ext4: avoid hangs in ext4_da_should_update_i_disksize()
ext4: display the correct mount option in /proc/mounts for [no]init_itable
ext4: Fix crash due to getting bogus eh_depth value on big-endian systems
ext4: fix ext4_end_io_dio() racing against fsync()
.. using the new signed tag merge of git that now verifies the gpg
signature automatically. Yay. The branchname was just 'dev', which is
prettier. I'll tell Ted to use nicer tag names for future cases.
Linus Torvalds [Thu, 15 Dec 2011 02:23:35 +0000 (18:23 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: llseek fix race
fuse: fix llseek bug
fuse: fix fuse_retrieve
Linus Torvalds [Thu, 15 Dec 2011 02:22:55 +0000 (18:22 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/ncpfs: fix error paths and goto statements in ncp_fill_super()
configfs: register_filesystem() called too early
fuse: register_filesystem() called too early
ubifs: too early register_filesystem()
... and the same kind of leak for mqueue
procfs: fix a vfsmount longterm reference leak
David S. Miller [Wed, 14 Dec 2011 18:05:22 +0000 (10:05 -0800)]
sparc32: Be less strict in matching %lo part of relocation.
The "(insn & 0x01800000) != 0x01800000" test matches 'restore'
but that is a legitimate place to see the %lo() part of a 32-bit
symbol relocation, particularly in tail calls.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Alex Deucher [Mon, 12 Dec 2011 14:23:48 +0000 (09:23 -0500)]
drm/radeon/kms: add some new pci ids
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=43739
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Djalal Harouni [Tue, 13 Dec 2011 01:47:29 +0000 (02:47 +0100)]
fs/ncpfs: fix error paths and goto statements in ncp_fill_super()
The label 'out_bdi' should be followed by bdi_destroy() instead of
fput() which should be after the 'out_fput' label.
If bdi_setup_and_register() fails then jump to the 'out_fput' label
instead of the 'out_bdi' one.
If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi'
label to call bdi_destroy() otherwise the bdi object will not be
destroyed.
Compile tested only.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Yongqiang Yang [Wed, 14 Dec 2011 03:29:12 +0000 (22:29 -0500)]
ext4: handle EOF correctly in ext4_bio_write_page()
We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Yongqiang Yang [Wed, 14 Dec 2011 03:13:42 +0000 (22:13 -0500)]
ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized
If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater
than ee_block + ee_len.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Yongqiang Yang [Wed, 14 Dec 2011 03:05:05 +0000 (22:05 -0500)]
ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()
If a page has been read into memory and never been written, it has no
buffers, but we should handle the page in truncate or punch hole.
VFS code of writing operations has handled holes correctly, so this
patch removes the code handling holes in writing operations.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Yongqiang Yang [Wed, 14 Dec 2011 02:51:55 +0000 (21:51 -0500)]
ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
If there is an unwritten but clean buffer in a page and there is a
dirty buffer after the buffer, then mpage_submit_io does not write the
dirty buffer out. As a result, da_writepages loops forever.
This patch fixes the problem by checking dirty flag.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Andrea Arcangeli [Wed, 14 Dec 2011 02:41:15 +0000 (21:41 -0500)]
ext4: avoid hangs in ext4_da_should_update_i_disksize()
If the pte mapping in generic_perform_write() is unmapped between
iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the
"copied" parameter to ->end_write can be zero. ext4 couldn't cope with
it with delayed allocations enabled. This skips the i_disksize
enlargement logic if copied is zero and no new data was appeneded to
the inode.
gdb> bt
#0 0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\
08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467
#1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
#2 0xffffffff810d97f1 in generic_perform_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value o\
ptimized out>, pos=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2440
#3 generic_file_buffered_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value optimized out>, p\
os=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2482
#4 0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\
xffff88001e26be40) at mm/filemap.c:2600
#5 0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=<value optimi\
zed out>, pos=<value optimized out>) at mm/filemap.c:2632
#6 0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\
t fs/ext4/file.c:136
#7 0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=<value optimized out>, len=<value optimized out>, \
ppos=0xffff88001e26bf48) at fs/read_write.c:406
#8 0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x4\
000, pos=0xffff88001e26bf48) at fs/read_write.c:435
#9 0xffffffff8113816c in sys_write (fd=<value optimized out>, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x\
4000) at fs/read_write.c:487
#10 <signal handler called>
#11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ ()
#12 0x0000000000000000 in ?? ()
gdb> print offset
$22 = 0xffffffffffffffff
gdb> print idx
$23 = 0xffffffff
gdb> print inode->i_blkbits
$24 = 0xc
gdb> up
#1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
2512 if (ext4_da_should_update_i_disksize(page, end)) {
gdb> print start
$25 = 0x0
gdb> print end
$26 = 0xffffffffffffffff
gdb> print pos
$27 = 0x108000
gdb> print new_i_size
$28 = 0x108000
gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize
$29 = 0xd9000
gdb> down
2467 for (i = 0; i < idx; i++)
gdb> print i
$30 = 0xd44acbee
This is 100% reproducible with some autonuma development code tuned in
a very aggressive manner (not normal way even for knumad) which does
"exotic" changes to the ptes. It wouldn't normally trigger but I don't
see why it can't happen normally if the page is added to swap cache in
between the two faults leading to "copied" being zero (which then
hangs in ext4). So it should be fixed. Especially possible with lumpy
reclaim (albeit disabled if compaction is enabled) as that would
ignore the young bits in the ptes.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Larry Finger [Sun, 11 Dec 2011 16:27:54 +0000 (10:27 -0600)]
staging: r8712u: Add new USB ID
Add USB ID for Sitecom WLA-2000 v1.001 WLAN.
Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Omar Ramirez Luna [Fri, 18 Nov 2011 22:18:54 +0000 (16:18 -0600)]
staging: tidspbridge: request dmtimer clocks on init
Given that dm timer framework doesn't support request of clocks
by soft | hard irqs because some recent changes, tidspbridge needs
to request its clocks on init and enable/disable them on demand.
This was first seen on 3.2-rc1.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Omar Ramirez Luna [Tue, 15 Nov 2011 02:16:57 +0000 (20:16 -0600)]
staging: tidspbridge: include module.h by default
Fixes compilation break when compiled as part of the kernel:
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION'
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe':
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.)
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Tue, 13 Dec 2011 23:02:31 +0000 (15:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"
x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware
Linus Torvalds [Tue, 13 Dec 2011 22:59:42 +0000 (14:59 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: add missing spin_unlock at ceph_mdsc_build_path()
ceph: fix SEEK_CUR, SEEK_SET regression
crush: fix mapping calculation when force argument doesn't exist
ceph: use i_ceph_lock instead of i_lock
rbd: remove buggy rollback functionality
rbd: return an error when an invalid header is read
ceph: fix rasize reporting by ceph_show_options
Linus Torvalds [Tue, 13 Dec 2011 22:58:56 +0000 (14:58 -0800)]
Merge branch 'writeback-for-linus' of git://git./linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: set max_pause to lowest value on zero bdi_dirty
writeback: permit through good bdi even when global dirty exceeded
writeback: comment on the bdi dirty threshold
fs: Make write(2) interruptible by a fatal signal
writeback: Fix issue on make htmldocs
David S. Miller [Tue, 13 Dec 2011 22:35:06 +0000 (17:35 -0500)]
ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
After commit
8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't
use inetpeer to store metrics for routes.") the test in rt6_alloc_cow()
for setting the ANYCAST flag is now wrong.
'rt' will always now have a plen of 128, because it is set explicitly
to 128 by ip6_rt_copy.
So to restore the semantics of the test, check the destination prefix
length of 'ort'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Felipe Contreras [Thu, 8 Dec 2011 20:23:00 +0000 (22:23 +0200)]
ARM: OMAP: rx51: fix USB
Commit
10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51:
Enable isp1704 power on/off) added power management for isp1704.
However, the transceiver should be powered on by default,
otherwise USB doesn't work at all for networking during
boot.
All kernels after v3.0 are affected.
Cc: stable@kernel.org
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Sebastian Reichel <sre@debian.org>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yehuda Sadeh [Tue, 13 Dec 2011 17:57:44 +0000 (09:57 -0800)]
ceph: add missing spin_unlock at ceph_mdsc_build_path()
one of the paths was missing spin_unlock
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Wolfram Sang [Tue, 13 Dec 2011 09:12:48 +0000 (10:12 +0100)]
gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121
Add a 5121-custom reject if an input-only pin is requested to be output
(see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to
consume less lines which scales better.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
[grant.likely: Fixed build error]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Feng Tang [Tue, 13 Dec 2011 15:53:50 +0000 (23:53 +0800)]
gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip
These hooks will be needed by the general disabl/enable_irq();
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Feng Tang [Tue, 13 Dec 2011 15:53:49 +0000 (23:53 +0800)]
gpio-ml-ioh: fix a bug in the interrupt handler
GPIO's irq action's dev_id is set to the first struct ioh_gpio chip,
so when loop checking the 8 chips, the "chip" should be changed
according.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Rob Herring [Fri, 9 Dec 2011 22:56:08 +0000 (16:56 -0600)]
gpio: pl061: drop extra check for NULL platform_data
In adding DT binding support, the check for NULL platform_data got added
back in inadvertently, so remove it.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Bjørn Mork [Tue, 13 Dec 2011 04:33:02 +0000 (05:33 +0100)]
USB: option: Removing one bogus and adding some new Huawei combinations
Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a
number of different devices, which each can appear with a number
of different descriptor sets. Different types of interfaces
can be identified by looking at the subclass and protocol fields
Subclass 1 protocol 8 is actually the data interface of a CDC
ECM set, with subclass 1 protocol 9 as the control interface.
Neither support serial data communcation, and cannot therefore
be supported by this driver.
At the same time, add a few other sets which appear if the
device is configured in "Windows mode" using this modeswitch
message:
55534243000000000000000000000011060000000100000000000000000000
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / log