drm/nouveau: Add temperature support (vbios parsing, readings, hwmon)

Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: correct INIT_DP_CONDITION subcondition 5

Fixes DP output on a GTX 465 board I have.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Parse old style perf tables.

Used on nv17-nv28, they contain memory clocks and timings, only one of
the table entries can actually be used, depending on the RAMCFG
straps, and it's usually higher than the frequency programmed on boot
by the BIOS.

The memory timings listed in table version 0x1x are used to init the
0x12xx range but they aren't required for reclocking to work.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: flush bar1 vm / dma object setup before poking 0x1708

Should fix issues noticed on NVAC (MacBook Pro / ION) since gpuobj
rework.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix thinko in volt 0x1x parsing

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: implement parsing of DCB 2.2 GPIO table

Found on NV3x boards, this should allow voltage modifications to work
on these chipsets.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix potential accuracy loss when parsing perf 0x1c tables

Reported-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Fix build regression, undefined reference to `acpi_video_get_edid'

Build breakage:

drivers/built-in.o: In function `nouveau_acpi_edid':
(.text+0x13404e): undefined reference to `acpi_video_get_edid'
make: *** [.tmp_vmlinux1] Error 1

Introduced by:

a6ed76d7ffc62ffa474b41d31b011b6853c5de32 is the first bad commit
commit a6ed76d7ffc62ffa474b41d31b011b6853c5de32
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Mon Jul 12 15:33:07 2010 +1000

    drm/nouveau: support fetching LVDS EDID from ACPI

    Based on a patch from Matthew Garrett.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
It doesn't seem to revert cleanly, but the problem lies in these
two config entries:

CONFIG_ACPI=y
CONFIG_ACPI_VIDEO=m

Adding a select for ACPI_VIDEO appears to be the best solution, and
is comparable to what is done in DRM_I915.  Builds, boots, and appears to
work correctly.

Signed-off-by: Philip J. Turmel <philip@turmel.org>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: restore perflvl on resume, and restore boot perflvl on unload

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: allow static performance level setting

Guarded by a module parameter for the moment, read the code for the
magic value which enables it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv04-nv40: import initial pm backend

Currently just hooked up to the already-existing nouveau_hw, which should
handle all relevant chipsets as well as we currently can.

This will likely be eventually split out and improved into chipset specific
code at a later point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: import initial clock get/set routines + hook up pm engine

This will make nouveau_pm attempt to report the card's current performance
level both during bootup, and through sysfs.

This is a very initial implementation, and can be improved a *lot*

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: import initial work on vbios performance table parsing

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: make bios code easier to use externally

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: make the behaviour of get_pll_limits() consistent

This replaces all the pll_types definitions for ones that match the types
used in the tables in recent VBIOS versions.

get_pll_limits() will now accept either type or register value as input
across all limits table versions, and will store the actual register ID
that a PLL type refers to in the returned structure.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: fix 100c90 write on nva3

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: zero dummy page

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: mark PCIEGART pages non-present rather than using dummy page

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: we can't free ACPI EDID, so make a copy that we can

The rest of the connector code assumes we can kfree() the EDID pointer.
This causes things to blow up with the ACPI EDID pointer we get
passed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: handle fifo pusher errors better

The most important part of this change is that we now instruct PFIFO to
drop all pending fetches, rather than attempting to skip a single dword
and hope that things would magically sort themselves out - they usually
don't, and we end up with PFIFO being completely hung.

This commit also adds somewhat more useful logging when these exceptions
occur.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: better handling of unmappable vram

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Try to fetch an EDID from OF if DDC fails.

More Apple brain damage, it fixes the modesetting failure on an eMac
G4 (fdo bug 29810).

Reported-by: Zoltan Varnagy <doi@freemail.hu>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Simplify tile region handling.

Instead of emptying the caches to avoid a race with the PFIFO puller,
go straight ahead and try to recover from it when it happens. Also,
kill pfifo->cache_flush and tile->lock, we don't need them anymore.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Remove implicit argument from nv_wait().

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: PRAMIN is available from the start on pre-nv50.

This makes sure that RAMHT is cleared correctly on start up.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Add module parameter to override the default AGP rate.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Don't enable AGP FW on nv18.

FW seems to be broken on nv18, it causes random lockups and breaks
suspend/resume even with the blob.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Don't remove ramht entries from the neighboring channels.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Break some long lines in the TV-out code.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: fix SOR count for early chipsets

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: report BAR access faults

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: move vm trap to nv50_fb.c

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: demagic grctx, and add NVAF support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: protect ramht_find() from oopsing if on channel without ramht

This doesn't actually happen now, but there's a test case for an earlier
kernel where a GPU error is signalled on one of nv50's fake channels, and
the ramht lookup by the IRQ handler triggered an oops.

This adds a check for RAMHT's existance on a channel before looking up
an object handle.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove nouveau_gpuobj_late_takedown

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: protect gpuobj list + global instmem heap with spinlock

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix gpuobj refcount to use atomics

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: add spinlock around ramht modifications

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: tidy ram{ht,fc,ro} a bit

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: rework init ordering so nv50_instmem.c can be less bad

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: calculate vram reordering block size

Will be used at a later point when we plug in an alternative VRAM memory
manager for GeForce 8+ boards.

Based on pscnv code to do the same.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: allow gpuobjs that aren't mapped into aperture

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: simplify fake gpu objects

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove nouveau_gpuobj_ref completely, replace with sanity

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: rebase per-channel pramin heap offsets to 0

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: modify object accessors, offset in bytes rather than dwords

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: move ramht code out of nouveau_object.c, nothing to see here

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: have nv_mask return original register value

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv40: Try to set up CRE_LCD even if it has unknown bits set.

They don't seem to do anything useful, and we really want to program
CRE_LCD if we aren't lucky enough to find the right CRTC binding
already set.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv17-nv4x: Fix analog load detection false positive on rare occasions.

On some boards the residual current DAC outputs can draw when they're
disconnected can be high enough to give a false load detection
positive (I've only seen it in the S-video luma output of some cards,
but just to be sure). The output line capacitance is limited and
sampling twice should fix it reliably.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: require explicit unmap of kmapped bos

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove second map of notifier bo

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: move check for no-op bo move before memcpy fallback

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: add new accelerated bo move funtion

Hopefully this one will be better able to cope with moving tiled buffers
around without getting them all scrambled as a result.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv20: Use the nv30 CRTC bandwidth calculation code.

nv2x CRTC FIFOs are as large as in nv3x (4kB it seems), and the FIFO
control registers have the same layout: we can make them share the
same implementation.

Previously we were using the nv1x code, but the calculated FIFO
watermarks are usually too low for nv2x and they cause horrible
scanout artifacts. They've gone unnoticed until now because we've been
leaving one of the bandwidth regs uninitialized (CRE 47, which
contains the most significant bits of FFLWM), so everything seemed to
work fine except in some cases after a cold boot, depending on the
memory bandwidth and pixel clocks used.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Fix suspend on some nv4x AGP cards.

On some nv4x cards (specifically, the ones that use an internal
PCIE->AGP bridge) the AGP controller state isn't preserved after a
suspend/resume cycle, and the AGP control registers have moved from
0x18xx to 0x100xx, so the FW check in nouveau_mem_reset_agp() doesn't
quite work. Check "dev->agp->mode" instead.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge remote branch 'origin/master' of /home/airlied/kernel//linux-2.6 into drm-core-next

hugetlb, rmap: add BUG_ON(!PageLocked) in hugetlb_add_anon_rmap()

Confirming page lock is held in hugetlb_add_anon_rmap() may be useful
to detect possible future problems.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb, rmap: fix confusing page locking in hugetlb_cow()

The "if (!trylock_page)" block in the avoidcopy path of hugetlb_cow()
looks confusing and is buggy.  Originally this trylock_page() was
intended to make sure that old_page is locked even when old_page !=
pagecache_page, because then only pagecache_page is locked.

This patch fixes it by moving page locking into hugetlb_fault().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb, rmap: use hugepage_add_new_anon_rmap() in hugetlb_cow()

Obviously, setting anon_vma for COWed hugepage should be done
by hugepage_add_new_anon_rmap() to scan vmas faster.
This patch fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb, rmap: always use anon_vma root pointer

This patch applies Andrea's fix given by the following patch into hugepage
rmapping code:

  commit 288468c334e98aacbb7e2fb8bde6bc1adcd55e05
  Author: Andrea Arcangeli <aarcange@redhat.com>
  Date:   Mon Aug 9 17:19:09 2010 -0700

This patch uses anon_vma->root and avoids unnecessary overwriting when
anon_vma is already set up.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix reboot on Intel hosts
  KVM: fix irqfd assign/deassign race

Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  thinkpad-acpi: avoid keymap pitfall
  Change MSI LAPTOP driver maintainer to Lee, Chun-Yi

thinkpad-acpi: avoid keymap pitfall

Change the code so that it will use the correct size for keymap entries.
Do it in a way that makes it harder to screw it up in the future.

Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

Change MSI LAPTOP driver maintainer to Lee, Chun-Yi

Change MSI LAPTOP driver maintainer from Lennart Poettering to Lee, Chun-Yi.

MSI is a Taiwan OEM company, Lee, Chun-Yi can more easy to contact with MSI
and maintain msi-laptop driver.
Thank's for Lennart Poettering's contribute, Lee, Chun-Yi will base on his
article to continue maintain the msi-laptop driver.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

MN10300: Arch doesn't support HAVE_ARCH_TRACEHOOK

Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not
support it at this time.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MN10300: Fix SIGRTMAX

SIGRTMAX should be _NSIG not _NSIG-1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MN10300: Fix endianess of ext2 bitops

The MN10300 arch ext2 bitops assume a big-endian kernel, but the MN10300
arch only runs in little-endian mode.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix pcpu_last_unit_cpu

KVM: Fix reboot on Intel hosts

When we reboot, we disable vmx extensions or otherwise INIT gets blocked.
If a task on another cpu hits a vmx instruction, it will fault if vmx is
disabled.  We trap that to avoid a nasty oops and spin until the reboot
completes.

Problem is, we sleep with interrupts disabled.  This blocks smp_send_stop()
from running, and the reboot process halts.

Fix by enabling interrupts before spinning.

KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: fix irqfd assign/deassign race

I think I see the following (theoretical) race:

During irqfd assign, we drop irqfds lock before we
schedule inject work. Therefore, deassign running
on another CPU could cause shutdown and flush to run
before inject, causing user after free in inject.

A simple fix it to schedule inject under the lock.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

ipmi: fix hardcoded ipmi device exit path warning

When modprobe.conf has
options ipmi_si type="kcs" ports=0xCA2 regspacings="4"

ipmi_si can be loaded properly, but when try to unload it get:

Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt
Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected
Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing
Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------
Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0()
Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800
Sep 20 15:01:09 xx kernel: Unexpected driver unregister!
Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf]
Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G        W   2.6.36-rc5-tip+ #6
Sep 20 15:01:09 xx kernel: Call Trace:
Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0
Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50
Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0
Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20
Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si]
Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270
Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320
Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]---

We need to check if ipmi_pnp_driver is loaded before we try to unload it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: s3c: balance state changes of wakeup flag

This change resolves a problem about unbalanced calls of
enable_irq_wakeup() and disable_irq_wakeup() for alarm interrupt.

Bug reproduction:

root@eb600:~# echo 0 > /sys/class/rtc/rtc0/wakealarm

WARNING: at kernel/irq/manage.c:361 set_irq_wake+0x7c/0xe4()
 Unbalanced IRQ 46 wake disable
Modules linked in:
[<c0025708>] (unwind_backtrace+0x0/0xd8) from [<c003358c>] (warn_slowpath_common+0x44/0x5c)
[<c003358c>] (warn_slowpath_common+0x44/0x5c) from [<c00335dc>] (warn_slowpath_fmt+0x24/0x30)
[<c00335dc>] (warn_slowpath_fmt+0x24/0x30) from [<c0058c20>] (set_irq_wake+0x7c/0xe4)
[<c0058c20>] (set_irq_wake+0x7c/0xe4) from [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8)
[<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) from [<c01b47a0>] (rtc_set_alarm+0x60/0x74)
[<c01b47a0>] (rtc_set_alarm+0x60/0x74) from [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8)
[<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) from [<c01891ec>] (dev_attr_store+0x20/0x24)
[<c01891ec>] (dev_attr_store+0x20/0x24) from [<c00be934>] (sysfs_write_file+0x104/0x13c)
[<c00be934>] (sysfs_write_file+0x104/0x13c) from [<c0080e7c>] (vfs_write+0xb0/0x158)
[<c0080e7c>] (vfs_write+0xb0/0x158) from [<c0080fcc>] (sys_write+0x3c/0x68)
[<c0080fcc>] (sys_write+0x3c/0x68) from [<c0020ec0>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben@fluff.org.uk>
Cc: Atul Dahiya <atul.dahiya@samsung.com>
Cc: Taekgyun Ko <taeggyun.ko@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap: call unlink_anon_vmas() in __split_vma() in case of error

If __split_vma fails because of an out of memory condition the
anon_vma_chain isn't teardown and freed potentially leading to rmap walks
accessing freed vma information plus there's a memleak.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rmap: fix walk during fork

The below bug in fork led to the rmap walk finding the parent huge-pmd
twice instead of just once, because the anon_vma_chain objects of the
child vma still point to the vma->vm_mm of the parent.

The patch fixes it by making the rmap walk accurate during fork.  It's not
a big deal normally but it worth being accurate considering the cost is
the same.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/pci/intel-iommu.c: fix build with older gcc's

drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw':
drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available
drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here

Move the offending function (and its siblings) to top-of-file, remove the
forward declaration.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441

Reported-by: Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: filter unkillable tasks from tasklist dump

/proc/sys/vm/oom_dump_tasks is enabled by default, so it's necessary to
limit as much information as possible that it should emit.

The tasklist dump should be filtered to only those tasks that are eligible
for oom kill.  This is already done for memcg ooms, but this patch extends
it to both cpuset and mempolicy ooms as well as init.

In addition to suppressing irrelevant information, this also reduces
confusion since users currently don't know which tasks in the tasklist
aren't eligible for kill (such as those attached to cpusets or bound to
mempolicies with a disjoint set of mems or nodes, respectively) since that
information is not shown.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/sis/sis_main.c: prevent reading uninitialized stack memory

The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes
of uninitialized stack memory, because the "reserved" member of the
fb_vblank struct declared on the stack is not altered or zeroed before
being copied back to the user.  This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix compile warning

This fixes:
incompatible pointer type:  => 89
       arch/um/kernel/exec.c: warning: passing argument 2 of 'execve1' from
incompatible pointer type:  => 69, 85
       arch/um/kernel/exec.c: warning: passing argument 3 of 'execve1' from
incompatible pointer type:  => 69, 85

which was introduced by d7627467b7a8d ("Make do_execve() take a const
filename pointer")

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/pid/smaps: fix dirty pages accounting

Currently, /proc/<pid>/smaps has wrong dirty pages accounting.
Shared_Dirty and Private_Dirty output only pte dirty pages and ignore
PG_dirty page flag.  It is difference against documentation, but also
inconsistent against Referenced field.  (Referenced checks both pte and
page flags)

This patch fixes it.

Test program:

 large-array.c
 ---------------------------------------------------
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>

 char array[1*1024*1024*1024L];

 int main(void)
 {
         memset(array, 1, sizeof(array));
         pause();

         return 0;
 }
 ---------------------------------------------------

Test case:
 1. run ./large-array
 2. cat /proc/`pidof large-array`/smaps
 3. swapoff -a
 4. cat /proc/`pidof large-array`/smaps again

Test result:
 <before patch>

00601000-40601000 rw-p 00000000 00:00 0
Size:            1048576 kB
Rss:             1048576 kB
Pss:             1048576 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:    218992 kB   <-- showed pages as clean incorrectly
Private_Dirty:    829584 kB
Referenced:       388364 kB
Swap:                  0 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB

 <after patch>

00601000-40601000 rw-p 00000000 00:00 0
Size:            1048576 kB
Rss:             1048576 kB
Pss:             1048576 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:         0 kB
Private_Dirty:   1048576 kB  <-- fixed
Referenced:       388480 kB
Swap:                  0 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: fix lockdep warning from fbcon_deinit()

Fix the lockdep warning:

[   13.657164] INFO: trying to register non-static key.
[   13.657169] the code is fine but needs lockdep annotation.
[   13.657171] turning off the locking correctness validator.
[   13.657177] Pid: 622, comm: modprobe Not tainted 2.6.36-rc3c #8
[   13.657180] Call Trace:
[   13.657194]  [<c13002c8>] ? printk+0x18/0x20
[   13.657202]  [<c1056cf6>] register_lock_class+0x336/0x350
[   13.657208]  [<c1058bf9>] __lock_acquire+0x449/0x1180
[   13.657215]  [<c1059997>] lock_acquire+0x67/0x80
[   13.657222]  [<c1042bf1>] ? __cancel_work_timer+0x51/0x230
[   13.657227]  [<c1042c23>] __cancel_work_timer+0x83/0x230
[   13.657231]  [<c1042bf1>] ? __cancel_work_timer+0x51/0x230
[   13.657236]  [<c10582b2>] ? mark_held_locks+0x62/0x80
[   13.657243]  [<c10b3a2f>] ? kfree+0x7f/0xe0
[   13.657248]  [<c105853c>] ? trace_hardirqs_on_caller+0x11c/0x160
[   13.657253]  [<c105858b>] ? trace_hardirqs_on+0xb/0x10
[   13.657259]  [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0
[   13.657263]  [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0
[   13.657268]  [<c1042dea>] cancel_work_sync+0xa/0x10
[   13.657272]  [<c117f444>] fbcon_deinit+0xe4/0x1e0
...

The warning is caused by trying to cancel an uninitialized work from
fbcon_exit().  Fix it by adding a check for queue.func, similarly to other
places in this code.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efifb: support the EFI framebuffer on more Apple hardware

Enable the EFI framebuffer on 14 more Macs, including the iMac11,1
iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1
MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and
MacBookPro7,1

Information gathered from various user submissions.

    https://bugzilla.redhat.com/show_bug.cgi?id=528232
    http://ubuntuforums.org/showthread.php?t=1557326

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luke Macken <lmacken@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efifb: check that the base address is plausible on pci systems

Some Apple machines have identical DMI data but different memory
configurations for the video.  Given that, check that the address in our
table is actually within the range of a PCI BAR on a VGA device in the
machine.

This also fixes up the return value from set_system(), which has always
been wrong, but never resulted in bad behavior since there's only ever
been one matching entry in the dmi table.

The patch

1) stops people's machines from crashing when we get their display wrong,
   which seems to be unfortunately inevitable,

2) allows us to support identical dmi data with differing video memory
   configurations

This also adds me as the efifb maintainer, since I've effectively been
acting as such for quite some time.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio: do not return ERESTARTSYS as a result of AIO

OCFS2 can return ERESTARTSYS from its write function when the process is
signalled while waiting for a cluster lock (and the filesystem is mounted
with intr mount option).  Generally, it seems reasonable to allow
filesystems to return this error code from its IO functions.  As we must
not leak ERESTARTSYS (and similar error codes) to userspace as a result of
an AIO operation, we have to properly convert it to EINTR inside AIO code
(restarting the syscall isn't really an option because other AIO could
have been already submitted by the same io_submit syscall).

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: check all_unreclaimable in direct reclaim path

M.  Vefa Bicakci reported 2.6.35 kernel hang up when hibernation on his
32bit 3GB mem machine.
(https://bugzilla.kernel.org/show_bug.cgi?id=16771). Also he bisected
the regression to

  commit bb21c7ce18eff8e6e7877ca1d06c6db719376e3c
  Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
  Date:   Fri Jun 4 14:15:05 2010 -0700

     vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure

At first impression, this seemed very strange because the above commit
only chenged function return value and hibernate_preallocate_memory()
ignore return value of shrink_all_memory().  But it's related.

Now, page allocation from hibernation code may enter infinite loop if the
system has highmem.  The reasons are that vmscan don't care enough OOM
case when oom_killer_disabled.

The problem sequence is following as.

1. hibernation
2. oom_disable
3. alloc_pages
4. do_try_to_free_pages
       if (scanning_global_lru(sc) && !all_unreclaimable)
               return 1;

If kswapd is not freozen, it would set zone->all_unreclaimable to 1 and
then shrink_zones maybe return true(ie, all_unreclaimable is true).  So at
last, alloc_pages could go to _nopage_.  If it is, it should have no
problem.

This patch adds all_unreclaimable check to protect in direct reclaim path,
too.  It can care of hibernation OOM case and help bailout
all_unreclaimable case slightly.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: M. Vefa Bicakci <bicave@superonline.com>
Reported-by: <caiqian@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: <caiqian@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ab3100.c: add missing platform_set_drvdata() in ab3100_rtc_probe()

Otherwise, calling platform_get_drvdata() in ab3100_rtc_remove() returns
NULL.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by:Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: change AVR32 and AT32AP maintainer

Alter the maintainer of the AVR32 architecture and the AVR32/AT32AP
machine support to me.  Haavard is moving on to new challenges, and we've
found it better to transfer the maintainer part to me.  I will have good
contact with Haavard anyway.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmware balloon: rename module

In an effort to minimize customer confusion we want to unify naming
convention for VMware-provided kernel modules.  This change renames the
balloon driver from vmware_ballon to vmw_balloon.

We expect to follow this naming convention (vmw_<module_name>) for all
modules that are part of mainline kernel and/or being distributed by
VMware, with the sole exception of vmxnet3 driver (since the name of
mainline driver happens to match with the name used in VMware Tools).

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Acked-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"

This fixes the regression caused by the commit 6fee48cd330c68
("dma-mapping: arm: use generic pci_set_dma_mask and
pci_set_consistent_dma_mask").

ARM needs to clip the dma coherent mask for dmabounce devices. This
restores the old trick.

Note that strictly speaking, the DMA API doesn't allow architectures to do
such but I'm not sure it's worth adding the new API to set the dma mask
that allows architectures to clip it.

Reported-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/vmcore: fix seeking

Commit 73296bc611 ("procfs: Use generic_file_llseek in /proc/vmcore")
broke seeking on /proc/vmcore.  This changes it back to use default_llseek
in order to restore the original behaviour.

The problem with generic_file_llseek is that it only allows seeks up to
inode->i_sb->s_maxbytes, which is zero on procfs and some other virtual
file systems.  We should merge generic_file_llseek and default_llseek some
day and clean this up in a proper way, but for 2.6.35/36, reverting vmcore
is the safer solution.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: CAI Qian <caiqian@redhat.com>
Tested-by: CAI Qian <caiqian@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: fix acpi probe print

After d9e1b6c45059ccf ("ipmi: fix ACPI detection with regspacing") we get

[   11.026326] ipmi_si: probing via ACPI
[   11.030019] ipmi_si 00:09: (null) regsize 1 spacing 1 irq 0
[   11.035594] ipmi_si: Adding ACPI-specified kcs state machine

on an old system with only one range for ipmi kcs range.

Try to fix it by adding another res pointer.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: always return a badness score of non-zero for eligible tasks

A task's badness score is roughly a proportion of its rss and swap
compared to the system's capacity.  The scale ranges from 0 to 1000 with
the highest score chosen for kill.  Thus, this scale operates on a
resolution of 0.1% of RAM + swap.  Admin tasks are also given a 3% bonus,
so the badness score of an admin task using 3% of memory, for example,
would still be 0.

It's possible that an exceptionally large number of tasks will combine to
exhaust all resources but never have a single task that uses more than
0.1% of RAM and swap (or 3.0% for admin tasks).

This patch ensures that the badness score of any eligible task is never 0
so the machine doesn't unnecessarily panic because it cannot find a task
to kill.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent freeing uninitialized pointer in compat_do_readv_writev

In 32-bit compatibility mode, the error handling for
compat_do_readv_writev() may free an uninitialized pointer, potentially
leading to all sorts of ugly memory corruption.  This is reliably
triggerable by unprivileged users by invoking the readv()/writev()
syscalls with an invalid iovec pointer.  The below patch fixes this to
emulate the non-compat version.

Introduced by commit b83733639a49 ("compat: factor out
compat_rw_copy_check_uvector from compat_do_readv_writev")

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable@kernel.org (2.6.35)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Prevent no-handler signal syscall restart recursion.
  sparc: Don't mask signal when we can't setup signal frame.
  sparc64: Fix race in signal instruction flushing.
  sparc64: Support RAW perf events.

powerpc: fix double syscall restarts

Make sigreturn zero regs->trap, make do_signal() do the same on all
paths.  As it is, signal interrupting e.g. read() from fd 512 (==
ERESTARTSYS) with another signal getting unblocked when the first
handler finishes will lead to restart one insn earlier than it ought
to.  Same for multiple signals with in-kernel handlers interrupting
that sucker at the same time.  Same for multiple signals of any kind
interrupting that sucker on 64bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends
  char: Mark /dev/zero and /dev/kmem as not capable of writeback
  bdi: Initialize noop_backing_dev_info properly
  cfq-iosched: fix a kernel OOPs when usb key is inserted
  block: fix blk_rq_map_kern bio direction flag
  cciss: freeing uninitialized data on error path

bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends

Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains.  In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.

Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

char: Mark /dev/zero and /dev/kmem as not capable of writeback

These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

bdi: Initialize noop_backing_dev_info properly

Properly initialize this backing dev info so that writeback code does not
barf when getting to it e.g. via sb->s_bdi.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

sparc: Prevent no-handler signal syscall restart recursion.

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>