GitHub/LineageOS/android_kernel_samsung_universal7580.git
14 years agorwsem: fully separate code paths to wake writers vs readers
Michel Lespinasse [Tue, 10 Aug 2010 00:21:15 +0000 (17:21 -0700)]
rwsem: fully separate code paths to wake writers vs readers

This is in preparation for later changes in the series.

In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader.  The code paths diverge at
this point.  The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: f71882fg: add support for the Fintek F71808E
Giel van Schijndel [Tue, 10 Aug 2010 00:21:13 +0000 (17:21 -0700)]
hwmon: f71882fg: add support for the Fintek F71808E

Allow device probing to recognise the Fintek F71808E.

Sysfs interface:
 * Fan/pwm control is the same as for F71889FG
 * Temperature and voltage sensor handling is largely the same as for
   the F71889FG
  - Has one temperature sensor less (doesn't have temp3)
  - Misses one voltage sensor (doesn't have V6, thus in6_input refers to
    what in7_input refers for F71889FG)

For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/hwmon/coretemp.c: remove unneeded #ifdef CONFIG_HOTPLUG_CPU
Andrew Morton [Tue, 10 Aug 2010 00:21:11 +0000 (17:21 -0700)]
drivers/hwmon/coretemp.c: remove unneeded #ifdef CONFIG_HOTPLUG_CPU

register_hotcpu_notifier() is designed to make these ifdefs unnecessary.

Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: coretemp: documentation update and cleanup
Chen Gong [Tue, 10 Aug 2010 00:21:10 +0000 (17:21 -0700)]
hwmon: coretemp: documentation update and cleanup

Update coretemp supported CPU TjMax lists and some cleanup work.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: coretemp: enable coretemp device add operation failure
Chen Gong [Tue, 10 Aug 2010 00:21:10 +0000 (17:21 -0700)]
hwmon: coretemp: enable coretemp device add operation failure

If one coretemp device can't be added, it should allow subsequent adding
operation because every new-added device will create a new sysfs group,
not an additional sensor sys entry.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: coretemp: update hotplug condition check
Chen Gong [Tue, 10 Aug 2010 00:21:09 +0000 (17:21 -0700)]
hwmon: coretemp: update hotplug condition check

Fix two errors in hotplug.  One is for hotplug notifier.  The other is
unnecessary driver unregister.  Because even none of online cpus supports
coretemp, we can't assume new onlined cpu doesn't support it either.  If
related driver is unregistered there we have no chance to use coretemp
from then on.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: add support for JEDEC JC 42.4 compliant temperature sensors
Guenter Roeck [Tue, 10 Aug 2010 00:21:08 +0000 (17:21 -0700)]
hwmon: add support for JEDEC JC 42.4 compliant temperature sensors

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor
Guenter Roeck [Tue, 10 Aug 2010 00:21:06 +0000 (17:21 -0700)]
hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor

This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohmc6352: add driver for the HMC6352 compass
Kalhan Trisal [Tue, 10 Aug 2010 00:21:05 +0000 (17:21 -0700)]
hmc6352: add driver for the HMC6352 compass

This driver will report the heading values in degrees to the sysfs
interface.  The values returned are headings .  e.g.  245.6

Alan: Cleanups requested now all folded in and a sysfs description to keep
Andrew happy. The sysfs description now resembles hwmon.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/hwmon/hdaps.c: add Lenovo Thinkpad T400 to the whitelist
Ritesh Raj Sarraf [Tue, 10 Aug 2010 00:21:04 +0000 (17:21 -0700)]
drivers/hwmon/hdaps.c: add Lenovo Thinkpad T400 to the whitelist

Add Lenovo Thinkpad T400.  I have done the testing on my laptop.  The
hdaps module detects the device and the hdapsd daemon is able to [un]park
the disk.

Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org>
Cc: Frank Seidel <frank@f-seidel.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: fix extraneous EXPORT_SYMBOL* warnings
Patrick Pannuto [Tue, 10 Aug 2010 00:21:03 +0000 (17:21 -0700)]
checkpatch: fix extraneous EXPORT_SYMBOL* warnings

These are caused by checkpatch incorrectly parsing its internal
representation of a statement block for struct's (or anything else that is
a statement block encapsulated in {}'s that also ends with a ';').  Fix
this by properly parsing a statement block.

An example:

+struct dummy_type dummy = {
+ .foo = "baz",
+};
+EXPORT_SYMBOL_GPL(dummy);
+
+static int dummy_func(void)
+{
+ return -EDUMMYCODE;
+}
+EXPORT_SYMBOL_GPL(dummy_func);

WARNING: EXPORT_SYMBOL(foo); should immediately \
follow its function/variable
#19: FILE: dummy.c:4:
+EXPORT_SYMBOL_GPL(dummy);

The above warning is issued when it should not be.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: warn about unexpectedly long msleep's
Patrick Pannuto [Tue, 10 Aug 2010 00:21:02 +0000 (17:21 -0700)]
checkpatch: warn about unexpectedly long msleep's

As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms
may sleep for as long as 20ms.  Caller's of msleep(1) or msleep(2), etc
are likely not to expect this quirky behavior - warn them.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: prefer usleep_range over udelay
Patrick Pannuto [Tue, 10 Aug 2010 00:21:01 +0000 (17:21 -0700)]
checkpatch: prefer usleep_range over udelay

When possible, sleeping is (usually) better than delaying; however, don't
bother callers of udelay < 10us, as those cases are generally not worth
the switch to usleep

[akpm@linux-foundation.org: fix mismatched parentheses]
Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: add more exceptions to 80 char lines
Joe Perches [Tue, 10 Aug 2010 00:21:01 +0000 (17:21 -0700)]
checkpatch: add more exceptions to 80 char lines

Add new logging functions netdev_<level> and netif_<level>.
Don't complain if the only thing on a line is a quoted string.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: change externals to globals
Joe Eloff [Tue, 10 Aug 2010 00:21:00 +0000 (17:21 -0700)]
checkpatch: change externals to globals

Make error message say 'ERROR: do not initialise globals to 0 or NULL'
rather than 'ERROR: do not initialise externals to 0 or NULL'.  Makes more
sense in the context since there is an extern keyword in C and that is a
global declaration within the scope of the current file.

Signed-off-by: Joe Eloff <kagen101@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: fix handling of leading spaces
Raffaele Recalcati [Tue, 10 Aug 2010 00:20:59 +0000 (17:20 -0700)]
checkpatch: fix handling of leading spaces

I've got a false positive when spaces are present at the beginning of a
line.

So I add this check, obviously excluding to check the lines in the middle of
comments.

For instance this code passes the checkpatch test:

+struct davinci_mcbsp_data {
+       unsigned int    fmt;
+    int             clk_div;
+};
+
+static struct davinci_mcbsp_data mcbsp_data;

Where, before the string "int             clk_div", I have 4 spaces (\040
ascii character).

With v2.6.34 scripts/checkpatch.pl script I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
total: 0 errors, 0 warnings, 201 lines checked
0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch has no obvious style
problems and is ready for submission.

That is not correct.  Instead with the proposed patch I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
WARNING: please, no space for starting a line,
                excluding comments
#63: FILE: sound/soc/davinci/davinci-i2s.c:165:
+    int             clk_div;$

WARNING: please, no space for starting a line,
                excluding comments
#95: FILE: sound/soc/davinci/davinci-i2s.c:406:
+    return 0;$

total: 0 errors, 2 warnings, 201 lines checked

That is correct.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocheckpatch: refactor 'allowed asm includes' and add memory.h
Wolfram Sang [Tue, 10 Aug 2010 00:20:57 +0000 (17:20 -0700)]
checkpatch: refactor 'allowed asm includes' and add memory.h

Change the check suggesting replacement of asm-includes with
linux-includes.  Exceptions to this rule are easier to extend now.  Add
memory.h because ARM has a custom one.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoedd: fix possible memory leak in edd_init() error path
Axel Lin [Tue, 10 Aug 2010 00:20:56 +0000 (17:20 -0700)]
edd: fix possible memory leak in edd_init() error path

The error may happen at any iteration of the for loop, this patch properly
unregisters already registed edd_devices in error path.

[akpm@linux-foundation.org: remove unneeded NULL test]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoflex_array: add helpers to get and put to make pointers easy to use
Eric Paris [Tue, 10 Aug 2010 00:20:56 +0000 (17:20 -0700)]
flex_array: add helpers to get and put to make pointers easy to use

Getting and putting arrays of pointers with flex arrays is a PITA.  You
have to remember to pass &ptr to the _put and you have to do weird and
wacky casting to get the ptr back from the _get.  Add two functions
flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic.

[akpm@linux-foundation.org: simplification suggested by Joe]
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: James Morris <jmorris@namei.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agolib: vsprintf: useless strlen() removed
Michal Nazarewicz [Tue, 10 Aug 2010 00:20:54 +0000 (17:20 -0700)]
lib: vsprintf: useless strlen() removed

The strict_strtoul() and strict_strtoull() functions used strlen() to
check argument's length in a situation where it wasn't strictly necessary

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: "Yi Yang" <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agolist debugging: warn when deleting a deleted entry
Baruch Siach [Tue, 10 Aug 2010 00:20:53 +0000 (17:20 -0700)]
list debugging: warn when deleting a deleted entry

Use the magic LIST_POISON* values to detect an incorrect use of list_del
on a deleted entry.  This DEBUG_LIST specific warning is easier to
understand than the generic Oops message caused by LIST_POISON
dereference.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: orphan BEFS
Joe Perches [Tue, 10 Aug 2010 00:20:52 +0000 (17:20 -0700)]
MAINTAINERS: orphan BEFS

This old address bounces and Sergey doesn't answer at another email
address.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sergey Kostyliov <rathamahata@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update Laurent Pinchart email
Joe Perches [Tue, 10 Aug 2010 00:20:51 +0000 (17:20 -0700)]
MAINTAINERS: update Laurent Pinchart email

Laurent is sending auto-replies with a new email address, so might as well
update MAINTAINERS.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update information about Linux Test Project maintainence
Subrata Modak [Tue, 10 Aug 2010 00:20:50 +0000 (17:20 -0700)]
MAINTAINERS: update information about Linux Test Project maintainence

Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to WIMAX STACK
Joe Perches [Tue, 10 Aug 2010 00:20:50 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to WIMAX STACK

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to PS3VRAM DRIVER
Joe Perches [Tue, 10 Aug 2010 00:20:49 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to PS3VRAM DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: remove section PROMISE DC4030
Joe Perches [Tue, 10 Aug 2010 00:20:49 +0000 (17:20 -0700)]
MAINTAINERS: remove section PROMISE DC4030

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to OMAP USB
Joe Perches [Tue, 10 Aug 2010 00:20:48 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to OMAP USB

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to POWERPC EMBEDDED PPC8XX
Joe Perches [Tue, 10 Aug 2010 00:20:47 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to POWERPC EMBEDDED PPC8XX

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to DELL WMI EXTRAS
Joe Perches [Tue, 10 Aug 2010 00:20:46 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to DELL WMI EXTRAS

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add patterns to CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
Joe Perches [Tue, 10 Aug 2010 00:20:45 +0000 (17:20 -0700)]
MAINTAINERS: add patterns to CRYPTOGRAPHIC RANDOM NUMBER GENERATOR

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update DRM DRIVERS patterns
Joe Perches [Tue, 10 Aug 2010 00:20:45 +0000 (17:20 -0700)]
MAINTAINERS: update DRM DRIVERS patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: add file patterns to UCLINUX FOR RENESAS H8/300
Joe Perches [Tue, 10 Aug 2010 00:20:44 +0000 (17:20 -0700)]
MAINTAINERS: add file patterns to UCLINUX FOR RENESAS H8/300

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: remove section STRIP
Joe Perches [Tue, 10 Aug 2010 00:20:44 +0000 (17:20 -0700)]
MAINTAINERS: remove section STRIP

Commit f80a3f62383bf673c310926d55142d51f118926d ("Staging: strip: delete
the driver") removed it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update SPEAR CLOCK FRAMEWORK SUPPORT file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:42 +0000 (17:20 -0700)]
MAINTAINERS: update SPEAR CLOCK FRAMEWORK SUPPORT file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: remove section SMX UIO Interface
Joe Perches [Tue, 10 Aug 2010 00:20:41 +0000 (17:20 -0700)]
MAINTAINERS: remove section SMX UIO Interface

Commit d6e976c0d258c9547a308bd8a9a82ec93e2bc6e2 ("UIO: Remove SMX
Cryptengine driver") removed the file.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update RICOH SMARTMEDIA/XD DRIVER file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:40 +0000 (17:20 -0700)]
MAINTAINERS: update RICOH SMARTMEDIA/XD DRIVER file patterns

Entered as 822 (10 key typo?).

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update PPP OVER L2TP file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:40 +0000 (17:20 -0700)]
MAINTAINERS: update PPP OVER L2TP file patterns

Commit 21b4aaa14329db793832e865f15000c5c0192ac3 ("l2tp: Relocate pppol2tp
driver to new net/l2tp directory") moved the file.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update NETWORKING [WIRELESS] file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:39 +0000 (17:20 -0700)]
MAINTAINERS: update NETWORKING [WIRELESS] file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update ARM/ZIPIT Z2 SUPPORT file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:38 +0000 (17:20 -0700)]
MAINTAINERS: update ARM/ZIPIT Z2 SUPPORT file patterns

Use correct file location.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update ARM/VOIPAC PXA270 file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:38 +0000 (17:20 -0700)]
MAINTAINERS: update ARM/VOIPAC PXA270 file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update ARM/NUVOTON W90X900 ARM ARCHITECTURE file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:37 +0000 (17:20 -0700)]
MAINTAINERS: update ARM/NUVOTON W90X900 ARM ARCHITECTURE file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMAINTAINERS: update ARM/BCMRING MTD NAND DRIVER file patterns
Joe Perches [Tue, 10 Aug 2010 00:20:37 +0000 (17:20 -0700)]
MAINTAINERS: update ARM/BCMRING MTD NAND DRIVER file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agogcc-4.6: printk: use stable variable to dump kmsg buffer
Andi Kleen [Tue, 10 Aug 2010 00:20:36 +0000 (17:20 -0700)]
gcc-4.6: printk: use stable variable to dump kmsg buffer

kmsg_dump takes care to sample the global variables
inside a spinlock, but then goes on to use the same
variables outside the spinlock region too.

Use the correct variable. This will make the race
window smaller.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agos390: remove WARN_ON for misc_deregister() failures
Akinobu Mita [Tue, 10 Aug 2010 00:20:35 +0000 (17:20 -0700)]
s390: remove WARN_ON for misc_deregister() failures

The previous change added WARN_ON() in misc_deregister().  So it is not
necessary to WARN_ON() misc_deregister() failure by callers.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agochar: add WARN_ON() in misc_deregister()
Akinobu Mita [Tue, 10 Aug 2010 00:20:35 +0000 (17:20 -0700)]
char: add WARN_ON() in misc_deregister()

misc_deregister() returns an error only when it attempts to unregister
the device that is not registered. This is the driver's bug.

Most of the drivers don't check the return value of misc_deregister().
(It is not bad thing because most of kernel *_unregister() API always
succeed and do not return value)

So it is better to indicate the error by WARN_ON() in misc_deregister().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agostop_machine: struct cpu_stopper, remove alignment padding on 64 bits
Richard Kennedy [Tue, 10 Aug 2010 00:20:34 +0000 (17:20 -0700)]
stop_machine: struct cpu_stopper, remove alignment padding on 64 bits

Reorder elements in structure cpu_stopper to remove alignment padding on
64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes
per cpu.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agox86, ia64, smp: use workqueues unconditionally during do_boot_cpu()
Suresh Siddha [Tue, 10 Aug 2010 00:20:33 +0000 (17:20 -0700)]
x86, ia64, smp: use workqueues unconditionally during do_boot_cpu()

Workqueues are now initialized as part of the early_initcall().  So they
are available for use during cold boot process aswell.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoinit/main.c: mark do_one_initcall* as __init_or_module
Kevin Winchester [Tue, 10 Aug 2010 00:20:32 +0000 (17:20 -0700)]
init/main.c: mark do_one_initcall* as __init_or_module

Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoinit/main.c: fix warning: 'calltime.tv64' may be used uninitialized
Kevin Winchester [Tue, 10 Aug 2010 00:20:32 +0000 (17:20 -0700)]
init/main.c: fix warning: 'calltime.tv64' may be used uninitialized

Using:

gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

init/main.c: In function `do_one_initcall':
init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokernel/range: remove unused definition of ARRAY_SIZE()
Geert Uytterhoeven [Tue, 10 Aug 2010 00:20:31 +0000 (17:20 -0700)]
kernel/range: remove unused definition of ARRAY_SIZE()

Remove duplicate definition of ARRAY_SIZE(), which was never used anyway.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agosys_personality: remove the bogus checks in sys_personality()->__set_personality...
Oleg Nesterov [Tue, 10 Aug 2010 00:20:30 +0000 (17:20 -0700)]
sys_personality: remove the bogus checks in sys_personality()->__set_personality() path

Cleanup, no functional changes.

- __set_personality() always changes ->exec_domain/personality, the
  special case when ->exec_domain remains the same buys nothing but
  complicates the code. Unify both cases to simplify the code.

- The -EINVAL check in sys_personality() was never right. If we assume
  that set_personality() can fail we should check the value it returns
  instead of verifying that task->personality was actually changed.

  Remove it. Before the previous patch it was possible to hit this case
  due to overflow problems, but this -EINVAL just indicated the kernel
  bug.

OTOH, probably it makes sense to change lookup_exec_domain() to return
ERR_PTR() instead of default_exec_domain if the search in exec_domains
list fails, and report this error to the user-space.  But this means
another user-space change, and we have in-kernel users which need fixes.
For example, PER_OSF4 falls into PER_MASK for unkown reason and nobody
cares to register this domain.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Wenming Zhang <wezhang@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec
Christoph Mair [Tue, 10 Aug 2010 00:20:28 +0000 (17:20 -0700)]
drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec

This driver adds support for the BMP085 digital pressure sensor from Bosch
Sensortec.  It exposes a sysfs api to userspace where pressure and
temperature measurement results can be read from the pressure0_input and
temp0_input file.  The chip is able to calculate the average of up to
eight samples to increase the accuracy.  This feature can be controlled by
writing to the oversampling file.

The BMP085 digital pressure sensor can measure ambient air pressure and
temperature.  Both values can be obtained from sysfs files.  The pressure
is measured by reading from pressure0_input.  Valid values range from
30000 to 110000 pascal with a resolution of 1 pascal (=0.01 millibar).

temp0_input holds the current temperature in degree celsius, multiplied by
10.  This results in a resolution of a tenth degree celsius.  Values range
from -400 to 850.

To increase the accuracy, this chip can calculate the average of 1, 2, 4
or 8 samples.  This behavior is controlled through the oversampling sysfs
file.  Two to the power of the value written to that file specifies how
many samples will be used.  Valid values: 0..3.

[akpm@linux-foundation.org: fix typo]
[shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohpilo: fix pointer warning in ilo_ccb_setup
Prarit Bhargava [Tue, 10 Aug 2010 00:20:27 +0000 (17:20 -0700)]
hpilo: fix pointer warning in ilo_ccb_setup

Fix i386 PAE compile warning:

drivers/misc/hpilo.c: In function `ilo_ccb_setup':
drivers/misc/hpilo.c:274: warning: cast to pointer from integer of different size

dma_addr_t is 64 on i386 PAE which causes a size mismatch.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: David Altobelli <david.altobelli@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/misc: ROHM BH1780GLI ambient light sensor driver
Hemanth V [Tue, 10 Aug 2010 00:20:25 +0000 (17:20 -0700)]
drivers/misc: ROHM BH1780GLI ambient light sensor driver

Add support for ROHM BH1780GLI Ambient light sensor.

BH1780 supports I2C interface.  Driver supports read/update of power state
and read of lux value (through SYSFS).  Writing value 3 to power_state
enables the sensor and current lux value could be read.

Currently this driver follows the same sysfs convention as supported by
drivers/misc/isl29003.c.

Signed-off-by: Hemanth V <hemanthv@ti.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoscripts/mod/modpost.c: fix memory leak
Alexey Fomenko [Tue, 10 Aug 2010 00:20:24 +0000 (17:20 -0700)]
scripts/mod/modpost.c: fix memory leak

sec2annotation returns malloc'ed buffer directly to printf as an argument.
 Free this buffer after printing.

Signed-off-by: Alexey Fomenko <ext-alexey.fomenko@nokia.com>
Cc: Trevor Keith <tsrk@tsrk.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoiommu: inline iommu_num_pages
Anton Blanchard [Tue, 10 Aug 2010 00:20:23 +0000 (17:20 -0700)]
iommu: inline iommu_num_pages

A profile of a network benchmark showed iommu_num_pages rather high up:

     0.52%  iommu_num_pages

Looking at the profile, an integer divide is taking almost all of the time:

      %
         :      c000000000376ea4 <.iommu_num_pages>:
    1.93 :      c000000000376ea4:       fb e1 ff f8     std     r31,-8(r1)
    0.00 :      c000000000376ea8:       f8 21 ff c1     stdu    r1,-64(r1)
    0.00 :      c000000000376eac:       7c 3f 0b 78     mr      r31,r1
    3.86 :      c000000000376eb0:       38 84 ff ff     addi    r4,r4,-1
    0.00 :      c000000000376eb4:       38 05 ff ff     addi    r0,r5,-1
    0.00 :      c000000000376eb8:       7c 84 2a 14     add     r4,r4,r5
   46.95 :      c000000000376ebc:       7c 00 18 38     and     r0,r0,r3
   45.66 :      c000000000376ec0:       7c 84 02 14     add     r4,r4,r0
    0.00 :      c000000000376ec4:       7c 64 2b 92     divdu   r3,r4,r5
    0.00 :      c000000000376ec8:       38 3f 00 40     addi    r1,r31,64
    0.00 :      c000000000376ecc:       eb e1 ff f8     ld      r31,-8(r1)
    1.61 :      c000000000376ed0:       4e 80 00 20     blr

Since every caller of iommu_num_pages passes in a constant power of two
we can inline this such that the divide is replaced by a shift. The
entire function is only a few instructions once optimised, so it is
a good candidate for inlining overall.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovfs: fix warning: 'dirent' is used uninitialized in this function
Kevin Winchester [Tue, 10 Aug 2010 00:20:22 +0000 (17:20 -0700)]
vfs: fix warning: 'dirent' is used uninitialized in this function

Using:

gcc (GCC) 4.5.0 20100610 (prerelease)

The following warnings appear:

fs/readdir.c: In function `filldir64':
fs/readdir.c:240:15: warning: `dirent' is used uninitialized in this function
fs/readdir.c: In function `filldir':
fs/readdir.c:155:15: warning: `dirent' is used uninitialized in this function
fs/compat.c: In function `compat_filldir64':
fs/compat.c:1071:11: warning: `dirent' is used uninitialized in this function
fs/compat.c: In function `compat_filldir':
fs/compat.c:984:15: warning: `dirent' is used uninitialized in this function

The warnings are related to the use of the NAME_OFFSET() macro.  Luckily,
it appears as though the standard offsetof() macro is what is being
implemented by NAME_OFFSET(), thus we can fix the warning and use a more
standard code construct at the same time.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoSubmittingPatches: add more about patch descriptions
Randy Dunlap [Tue, 10 Aug 2010 00:20:21 +0000 (17:20 -0700)]
SubmittingPatches: add more about patch descriptions

Add more information about patch descriptions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokernel.h: remove unused NIPQUAD and NIPQUAD_FMT
Joe Perches [Tue, 10 Aug 2010 00:20:20 +0000 (17:20 -0700)]
kernel.h: remove unused NIPQUAD and NIPQUAD_FMT

There are no more uses of NIPQUAD or NIPQUAD_FMT.  Remove the definitions.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoalpha/h8300/m68k: remove obsolete <asm/md.h> files
Geert Uytterhoeven [Tue, 10 Aug 2010 00:20:19 +0000 (17:20 -0700)]
alpha/h8300/m68k: remove obsolete <asm/md.h> files

Removal of these started in 2.3.43pre3, ca. 10 years ago.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoinclude/linux/compiler-gcc.h: use __same_type() in __must_be_array()
Rusty Russell [Tue, 10 Aug 2010 00:20:18 +0000 (17:20 -0700)]
include/linux/compiler-gcc.h: use __same_type() in __must_be_array()

We should use the __same_type() helper in __must_be_array().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoasm-generic/io.h: add big endian versions of io{read,write}{16,32}
Mike Frysinger [Tue, 10 Aug 2010 00:20:17 +0000 (17:20 -0700)]
asm-generic/io.h: add big endian versions of io{read,write}{16,32}

The asm-generic/iomap.h provides these functions already, but the
non-generic fallback defines do not.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoarch/um/kernel/ptrace.c: remove dead PROC_MM
Christoph Egger [Tue, 10 Aug 2010 00:20:16 +0000 (17:20 -0700)]
arch/um/kernel/ptrace.c: remove dead PROC_MM

PROC_MM doesn't exist in Kconfig.  Looking around it looks like a
left-over from 2.6.0 or even 2.4 times, last mentioned in a fedora patch
for 2.6.10.  I believe it's time to get rid of that last tiny parts here
that are still around.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoum: call free_irq() only on enabled channels
Richard Weinberger [Tue, 10 Aug 2010 00:20:14 +0000 (17:20 -0700)]
um: call free_irq() only on enabled channels

When I use OpenSUSE-11.2 on UML (> 2.6.25)
I get lots of such errors:

Registering fd 1 twice
Irqs : 3, 3
Ids : 0x09cb41a0, 0x09cb4120
------------[ cut here ]------------
WARNING: at kernel/irq/manage.c:896 __free_irq+0x79/0x11a()
Trying to free already-free IRQ 3
Modules linked in:
09dadc6c:  [<081b2edb>] dump_stack+0x1c/0x20
09dadc84:  [<080716da>] warn_slowpath_common+0x49/0x77
09dadc9c:  [<08071772>] warn_slowpath_fmt+0x26/0x2a
09dadcb4:  [<08094e08>] __free_irq+0x79/0x11a
09dadce4:  [<08094ed6>] free_irq+0x2d/0x49
09dadcf4:  [<0805b4bc>] close_one_chan+0x70/0x9c
09dadd0c:  [<0805b833>] close_chan+0x17/0x22
09dadd1c:  [<0805bdda>] enable_chan+0x70/0x7c
09dadd3c:  [<0805cbb7>] line_open+0x34/0x9f
09dadd54:  [<0805b21e>] con_open+0x13/0x35
09dadd6c:  [<0814dc89>] tty_open+0x285/0x384
09dadda0:  [<080b754e>] chrdev_open+0xe0/0xf9
09daddc0:  [<080b3fb2>] __dentry_open+0xf3/0x1e2
09dadde4:  [<080b4142>] nameidata_to_filp+0x35/0x49
09daddfc:  [<080bd270>] do_last+0x409/0x50e
09dade28:  [<080bea04>] do_filp_open+0x175/0x446
09dadecc:  [<080b3d89>] do_sys_open+0x4a/0x128
09dadf04:  [<080b3ea2>] sys_open+0x19/0x21
09dadf28:  [<0805ab5a>] handle_syscall+0x7a/0x98
09dadf78:  [<08068441>] userspace+0x2c9/0x370
09dadfe0:  [<08058bb3>] fork_handler+0x53/0x5b
09dadffc:  [<00766564>] 0x766564

---[ end trace 9ebc1094aaf4bded ]---

This patch fixes the issue.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agocpuidle: extend cpuidle and menu governor to handle dynamic states
Ai Li [Tue, 10 Aug 2010 00:20:13 +0000 (17:20 -0700)]
cpuidle: extend cpuidle and menu governor to handle dynamic states

On some SoC chips, HW resources may be in use during any particular idle
period.  As a consequence, the cpuidle states that the SoC is safe to
enter can change from idle period to idle period.  In addition, the
latency and threshold of each cpuidle state can vary, depending on the
operating condition when the CPU becomes idle, e.g.  the current cpu
frequency, the current state of the HW blocks, etc.

cpuidle core and the menu governor, in the current form, are geared
towards cpuidle states that are static, i.e.  the availabiltiy of the
states, their latencies, their thresholds are non-changing during run
time.  cpuidle does not provide any hook that cpuidle drivers can use to
adjust those values on the fly for the current idle period before the menu
governor selects the target cpuidle state.

This patch extends cpuidle core and the menu governor to handle states
that are dynamic.  There are three additions in the patch and the patch
maintains backwards-compatibility with existing cpuidle drivers.

1) add prepare() to struct cpuidle_device.  A cpuidle driver can hook
   into the callback and cpuidle will call prepare() before calling the
   governor's select function.  The callback gives the cpuidle driver a
   chance to update the dynamic information of the cpuidle states for the
   current idle period, e.g.  state availability, latencies, thresholds,
   power values, etc.

2) add CPUIDLE_FLAG_IGNORE as one of the state flags.  In the prepare()
   function, a cpuidle driver can set/clear the flag to indicate to the
   menu governor whether a cpuidle state should be ignored, i.e.  not
   available, during the current idle period.

3) add power_specified bit to struct cpuidle_device.  The menu governor
   currently assumes that the cpuidle states are arranged in the order of
   increasing latency, threshold, and power savings.  This is true or can
   be made true for static states.  Once the state parameters are dynamic,
   the latencies, thresholds, and power savings for the cpuidle states can
   increase or decrease by different amounts from idle period to idle
   period.  So the assumption of increasing latency, threshold, and power
   savings from Cn to C(n+1) can no longer be guaranteed.

It can be straightforward to calculate the power consumption of each
available state and to specify it in power_usage for the idle period.
Using the power_usage fields, the menu governor then selects the state
that has the lowest power consumption and that still satisfies all other
critieria.  The power_specified bit defaults to 0.  For existing cpuidle
drivers, cpuidle detects that power_specified is 0 and fills in a dummy
set of power_usage values.

Signed-off-by: Ai Li <aili@codeaurora.org>
Cc: Len Brown <len.brown@intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agohibernation: freeze swap at hibernation
KAMEZAWA Hiroyuki [Tue, 10 Aug 2010 00:20:11 +0000 (17:20 -0700)]
hibernation: freeze swap at hibernation

When taking a memory snapshot in hibernate_snapshot(), all (directly
called) memory allocations use GFP_ATOMIC.  Hence swap misusage during
hibernation never occurs.

But from a pessimistic point of view, there is no guarantee that no page
allcation has __GFP_WAIT.  It is better to have a global indication "we
enter hibernation, don't use swap!".

This patch tries to freeze new-swap-allocation during hibernation.  (All
user processes are frozenm so swapin is not a concern).

This way, no updates will happen to swap_map[] between
hibernate_snapshot() and save_image().  Swap is thawed when swsusp_free()
is called.  We can be assured that swap corruption will not occur.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm: fix corruption of hibernation caused by reusing swap during image saving
KAMEZAWA Hiroyuki [Tue, 10 Aug 2010 00:20:09 +0000 (17:20 -0700)]
mm: fix corruption of hibernation caused by reusing swap during image saving

Since 2.6.31, swap_map[]'s refcounting was changed to show that a used
swap entry is just for swap-cache, can be reused.  Then, while scanning
free entry in swap_map[], a swap entry may be able to be reclaimed and
reused.  It was caused by commit c9e444103b5e7a5 ("mm: reuse unused swap
entry if necessary").

But this caused deta corruption at resume. The scenario is

- Assume a clean-swap cache, but mapped.

- at hibernation_snapshot[], clean-swap-cache is saved as
  clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE.

- then, save_image() is called.  And reuse SWAP_HAS_CACHE entry to save
  image, and break the contents.

After resume:

- the memory reclaim runs and finds clean-not-referenced-swap-cache and
  discards it because it's marked as clean.  But here, the contents on
  disk and swap-cache is inconsistent.

Hance memory is corrupted.

This patch avoids the bug by not reclaiming swap-entry during hibernation.
This is a quick fix for backporting.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoalpha: implement HW performance events on the EV67 and later CPUs
Michael Cree [Tue, 10 Aug 2010 00:20:08 +0000 (17:20 -0700)]
alpha: implement HW performance events on the EV67 and later CPUs

This implements hardware performance events for the EV67 and later CPUs
within the Linux performance events subsystem.  Only using the performance
monitoring unit in HP/Compaq's so called "Aggregrate mode" is supported.

The code has been implemented in a manner that makes extension to other
older Alpha CPUs relatively straightforward should some mug wish to
indulge themselves.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoalpha: add wrperfmon.h header file to aid use of wrperfmon PALcall
Michael Cree [Tue, 10 Aug 2010 00:20:07 +0000 (17:20 -0700)]
alpha: add wrperfmon.h header file to aid use of wrperfmon PALcall

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoalpha: add performance monitor interrupt counter
Michael Cree [Tue, 10 Aug 2010 00:20:05 +0000 (17:20 -0700)]
alpha: add performance monitor interrupt counter

The following patches implement hardware performance events for the Alpha
EV67 and later CPUs.  I have had this running on a Compaq XP1000 (EV67,
single CPU) for a few days now.  Pretty cool -- discovered that the glibc
exp2() library routine uses on average 985 cycles to execute 777 CPU
instructions whereas Compaq's CPML library version of exp2() uses on
average 32 cycles to execute 47 CPU instructions to achieve the same
thing!

This patch:

Add performance monitor interrupt counternd and export the count to user
space via /proc/interrupts.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm: avoid resetting wb_start after each writeback round
Jan Kara [Tue, 10 Aug 2010 00:20:03 +0000 (17:20 -0700)]
mm: avoid resetting wb_start after each writeback round

WB_SYNC_NONE writeback is done in rounds of 1024 pages so that we don't
write out some huge inode for too long while starving writeout of other
inodes.  To avoid livelocks, we record time we started writeback in
wbc->wb_start and do not write out inodes which were dirtied after this
time.  But currently, writeback_inodes_wb() resets wb_start each time it
is called thus effectively invalidating this logic and making any
WB_SYNC_NONE writeback prone to livelocks.

This patch makes sure wb_start is set only once when we start writeback.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoksm: cleanup for mm_slots_hash
Lai Jiangshan [Tue, 10 Aug 2010 00:20:02 +0000 (17:20 -0700)]
ksm: cleanup for mm_slots_hash

Use compile-allocated memory instead of dynamic allocated memory for
mm_slots_hash.

Use hash_ptr() instead divisions for bucket calculation.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: raise the bar to PAGEOUT_IO_SYNC stalls
Wu Fengguang [Tue, 10 Aug 2010 00:20:01 +0000 (17:20 -0700)]
vmscan: raise the bar to PAGEOUT_IO_SYNC stalls

Fix "system goes unresponsive under memory pressure and lots of
dirty/writeback pages" bug.

http://lkml.org/lkml/2010/4/4/86

In the above thread, Andreas Mohr described that

Invoking any command locked up for minutes (note that I'm
talking about attempted additional I/O to the _other_,
_unaffected_ main system HDD - such as loading some shell
binaries -, NOT the external SSD18M!!).

This happens when the two conditions are both meet:
- under memory pressure
- writing heavily to a slow device

OOM also happens in Andreas' system.  The OOM trace shows that 3 processes
are stuck in wait_on_page_writeback() in the direct reclaim path.  One in
do_fork() and the other two in unix_stream_sendmsg().  They are blocked on
this condition:

(sc->order && priority < DEF_PRIORITY - 2)

which was introduced in commit 78dc583d (vmscan: low order lumpy reclaim
also should use PAGEOUT_IO_SYNC) one year ago.  That condition may be too
permissive.  In Andreas' case, 512MB/1024 = 512KB.  If the direct reclaim
for the order-1 fork() allocation runs into a range of 512KB
hard-to-reclaim LRU pages, it will be stalled.

It's a severe problem in three ways.

Firstly, it can easily happen in daily desktop usage.  vmscan priority can
easily go below (DEF_PRIORITY - 2) on _local_ memory pressure.  Even if
the system has 50% globally reclaimable pages, it still has good
opportunity to have 0.1% sized hard-to-reclaim ranges.  For example, a
simple dd can easily create a big range (up to 20%) of dirty pages in the
LRU lists.  And order-1 to order-3 allocations are more than common with
SLUB.  Try "grep -v '1 :' /proc/slabinfo" to get the list of high order
slab caches.  For example, the order-1 radix_tree_node slab cache may
stall applications at swap-in time; the order-3 inode cache on most
filesystems may stall applications when trying to read some file; the
order-2 proc_inode_cache may stall applications when trying to open a
/proc file.

Secondly, once triggered, it will stall unrelated processes (not doing IO
at all) in the system.  This "one slow USB device stalls the whole system"
avalanching effect is very bad.

Thirdly, once stalled, the stall time could be intolerable long for the
users.  When there are 20MB queued writeback pages and USB 1.1 is writing
them in 1MB/s, wait_on_page_writeback() will stuck for up to 20 seconds.
Not to mention it may be called multiple times.

So raise the bar to only enable PAGEOUT_IO_SYNC when priority goes below
DEF_PRIORITY/3, or 6.25% LRU size.  As the default dirty throttle ratio is
20%, it will hardly be triggered by pure dirty pages.  We'd better treat
PAGEOUT_IO_SYNC as some last resort workaround -- its stall time is so
uncomfortably long (easily goes beyond 1s).

The bar is only raised for (order < PAGE_ALLOC_COSTLY_ORDER) allocations,
which are easy to satisfy in 1TB memory boxes.  So, although 6.25% of
memory could be an awful lot of pages to scan on a system with 1TB of
memory, it won't really have to busy scan that much.

Andreas tested an older version of this patch and reported that it mostly
fixed his problem.  Mel Gorman helped improve it and KOSAKI Motohiro will
fix it further in the next patch.

Reported-by: Andreas Mohr <andi@lisas.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm/vmalloc.c: check kmalloc() return value
Kulikov Vasiliy [Tue, 10 Aug 2010 00:19:58 +0000 (17:19 -0700)]
mm/vmalloc.c: check kmalloc() return value

kmalloc() may fail, if so return -ENOMEM.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemcg: add mm_vmscan_memcg_isolate tracepoint
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:57 +0000 (17:19 -0700)]
memcg: add mm_vmscan_memcg_isolate tracepoint

Memcg also need to trace page isolation information as global reclaim.
This patch does it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: convert mm_vmscan_lru_isolate to DEFINE_EVENT
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:57 +0000 (17:19 -0700)]
vmscan: convert mm_vmscan_lru_isolate to DEFINE_EVENT

Mel Gorman recently added some vmscan tracepoints.  Unfortunately they are
covered only global reclaim.  But we want to trace memcg reclaim too.

Thus, this patch convert them to DEFINE_TRACE macro.  it help to reuse
tracepoint definition for other similar usage (i.e.  memcg).  This patch
have no functionally change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemcg, vmscan: add memcg reclaim tracepoint
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:56 +0000 (17:19 -0700)]
memcg, vmscan: add memcg reclaim tracepoint

Memcg also need to trace reclaim progress as direct reclaim.  This patch
add it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: convert direct reclaim tracepoint to DEFINE_TRACE
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:55 +0000 (17:19 -0700)]
vmscan: convert direct reclaim tracepoint to DEFINE_TRACE

Mel Gorman recently added some vmscan tracepoints.  Unfortunately they are
covered only global reclaim.  But we want to trace memcg reclaim too.

Thus, this patch convert them to DEFINE_TRACE macro.  it help to reuse
tracepoint definition for other similar usage (i.e.  memcg).  This patch
have no functionally change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: shrink_slab() requires the number of lru_pages, not the page order
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:54 +0000 (17:19 -0700)]
vmscan: shrink_slab() requires the number of lru_pages, not the page order

Presently shrink_slab() has the following scanning equation.

                            lru_scanned        max_pass
  basic_scan_objects = 4 x -------------  x -----------------------------
                            lru_pages        shrinker->seeks (default:2)

  scan_objects = min(basic_scan_objects, max_pass * 2)

If we pass very small value as lru_pages instead real number of lru pages,
shrink_slab() drop much objects rather than necessary.  And now,
__zone_reclaim() pass 'order' as lru_pages by mistake.  That produces a
bad result.

For example, if we receive very low memory pressure (scan = 32, order =
0), shrink_slab() via zone_reclaim() always drop _all_ icache/dcache
objects.  (see above equation, very small lru_pages make very big
scan_objects result).

This patch fixes it.

[akpm@linux-foundation.org: fix layout, typos]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agommu-notifiers: remove mmu notifier calls in apply_to_page_range()
Jeremy Fitzhardinge [Tue, 10 Aug 2010 00:19:52 +0000 (17:19 -0700)]
mmu-notifiers: remove mmu notifier calls in apply_to_page_range()

It is not appropriate for apply_to_page_range() to directly call any mmu
notifiers, because it is a general purpose function whose effect depends
on what context it is called in and what the callback function does.

In particular, if it is being used as part of an mmu notifier
implementation, the recursive calls can be particularly problematic.

It is up to apply_to_page_range's caller to do any notifier calls if
necessary.  It does not affect any in-tree users because they all operate
on init_mm, and mmu notifiers only pertain to usermode mappings.

[stefano.stabellini@eu.citrix.com: remove unused local `start']
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: protect reading of reclaim_stat with lru_lock
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:51 +0000 (17:19 -0700)]
vmscan: protect reading of reclaim_stat with lru_lock

Rik van Riel pointed out reading reclaim_stat should be protected
lru_lock, otherwise vmscan might sweep 2x much pages.

This fault was introduced by

  commit 4f98a2fee8acdb4ac84545df98cccecfd130f8db
  Author: Rik van Riel <riel@redhat.com>
  Date:   Sat Oct 18 20:26:32 2008 -0700

    vmscan: split LRU lists into anon & file sets

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: avoid subtraction of unsigned types
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:50 +0000 (17:19 -0700)]
vmscan: avoid subtraction of unsigned types

'slab_reclaimable' and 'nr_pages' are unsigned.  Subtraction is unsafe
because negative results would be misinterpreted.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrivers/base/node.c: reduce stack usage of node_read_meminfo()
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:50 +0000 (17:19 -0700)]
drivers/base/node.c: reduce stack usage of node_read_meminfo()

drivers/base/node.c: In function 'node_read_meminfo':
drivers/base/node.c:139: warning: the frame size of 848 bytes is
larger than 512 bytes

Fix it by splitting the sprintf() into three parts.  It has no functional
change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm: set VM_FAULT_WRITE in do_swap_page()
Andrea Arcangeli [Tue, 10 Aug 2010 00:19:49 +0000 (17:19 -0700)]
mm: set VM_FAULT_WRITE in do_swap_page()

Set the flag if do_swap_page is decowing the page the same way do_wp_page
would too.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agormap: add exclusive page to private anon_vma on swapin
Rik van Riel [Tue, 10 Aug 2010 00:19:48 +0000 (17:19 -0700)]
rmap: add exclusive page to private anon_vma on swapin

On swapin it is fairly common for a page to be owned exclusively by one
process.  In that case we want to add the page to the anon_vma of that
process's VMA, instead of to the root anon_vma.

This will reduce the amount of rmap searching that the swapout code needs
to do.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: deprecate oom_adj tunable
David Rientjes [Tue, 10 Aug 2010 00:19:47 +0000 (17:19 -0700)]
oom: deprecate oom_adj tunable

/proc/pid/oom_adj is now deprecated so that that it may eventually be
removed.  The target date for removal is August 2012.

A warning will be printed to the kernel log if a task attempts to use this
interface.  Future warning will be suppressed until the kernel is rebooted
to prevent spamming the kernel log.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: badness heuristic rewrite
David Rientjes [Tue, 10 Aug 2010 00:19:46 +0000 (17:19 -0700)]
oom: badness heuristic rewrite

This a complete rewrite of the oom killer's badness() heuristic which is
used to determine which task to kill in oom conditions.  The goal is to
make it as simple and predictable as possible so the results are better
understood and we end up killing the task which will lead to the most
memory freeing while still respecting the fine-tuning from userspace.

Instead of basing the heuristic on mm->total_vm for each task, the task's
rss and swap space is used instead.  This is a better indication of the
amount of memory that will be freeable if the oom killed task is chosen
and subsequently exits.  This helps specifically in cases where KDE or
GNOME is chosen for oom kill on desktop systems instead of a memory
hogging task.

The baseline for the heuristic is a proportion of memory that each task is
currently using in memory plus swap compared to the amount of "allowable"
memory.  "Allowable," in this sense, means the system-wide resources for
unconstrained oom conditions, the set of mempolicy nodes, the mems
attached to current's cpuset, or a memory controller's limit.  The
proportion is given on a scale of 0 (never kill) to 1000 (always kill),
roughly meaning that if a task has a badness() score of 500 that the task
consumes approximately 50% of allowable memory resident in RAM or in swap
space.

The proportion is always relative to the amount of "allowable" memory and
not the total amount of RAM systemwide so that mempolicies and cpusets may
operate in isolation; they shall not need to know the true size of the
machine on which they are running if they are bound to a specific set of
nodes or mems, respectively.

Root tasks are given 3% extra memory just like __vm_enough_memory()
provides in LSMs.  In the event of two tasks consuming similar amounts of
memory, it is generally better to save root's task.

Because of the change in the badness() heuristic's baseline, it is also
necessary to introduce a new user interface to tune it.  It's not possible
to redefine the meaning of /proc/pid/oom_adj with a new scale since the
ABI cannot be changed for backward compatability.  Instead, a new tunable,
/proc/pid/oom_score_adj, is added that ranges from -1000 to +1000.  It may
be used to polarize the heuristic such that certain tasks are never
considered for oom kill while others may always be considered.  The value
is added directly into the badness() score so a value of -500, for
example, means to discount 50% of its memory consumption in comparison to
other tasks either on the system, bound to the mempolicy, in the cpuset,
or sharing the same memory controller.

/proc/pid/oom_adj is changed so that its meaning is rescaled into the
units used by /proc/pid/oom_score_adj, and vice versa.  Changing one of
these per-task tunables will rescale the value of the other to an
equivalent meaning.  Although /proc/pid/oom_adj was originally defined as
a bitshift on the badness score, it now shares the same linear growth as
/proc/pid/oom_score_adj but with different granularity.  This is required
so the ABI is not broken with userspace applications and allows oom_adj to
be deprecated for future removal.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: move badness() declaration into oom.h
Andrew Morton [Tue, 10 Aug 2010 00:19:43 +0000 (17:19 -0700)]
oom: move badness() declaration into oom.h

Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: multi threaded process coredump don't make deadlock
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:42 +0000 (17:19 -0700)]
oom: multi threaded process coredump don't make deadlock

Oleg pointed out current PF_EXITING check is wrong. Because PF_EXITING
is per-thread flag, not per-process flag. He said,

   Two threads, group-leader L and its sub-thread T. T dumps the code.
   In this case both threads have ->mm != NULL, L has PF_EXITING.

   The first problem is, select_bad_process() always return -1 in this
   case (even if the caller is T, this doesn't matter).

   The second problem is that we should add TIF_MEMDIE to T, not L.

I think we can remove this dubious PF_EXITING check. but as first step,
This patch add the protection of multi threaded issue.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: give the dying task a higher priority
Luis Claudio R. Goncalves [Tue, 10 Aug 2010 00:19:41 +0000 (17:19 -0700)]
oom: give the dying task a higher priority

In a system under heavy load it was observed that even after the
oom-killer selects a task to die, the task may take a long time to die.

Right after sending a SIGKILL to the task selected by the oom-killer this
task has its priority increased so that it can exit() soon, freeing
memory.  That is accomplished by:

        /*
         * We give our sacrificial lamb high priority and access to
         * all the memory it needs. That way it should be able to
         * exit() and clear out its resources quickly...
         */
  p->rt.time_slice = HZ;
  set_tsk_thread_flag(p, TIF_MEMDIE);

It sounds plausible giving the dying task an even higher priority to be
sure it will be scheduled sooner and free the desired memory.  It was
suggested on LKML using SCHED_FIFO:1, the lowest RT priority so that this
task won't interfere with any running RT task.

If the dying task is already an RT task, leave it untouched.  Another good
suggestion, implemented here, was to avoid boosting the dying task
priority in case of mem_cgroup OOM.

Signed-off-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: remove child->mm check from oom_kill_process()
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:39 +0000 (17:19 -0700)]
oom: remove child->mm check from oom_kill_process()

The current "child->mm == p->mm" check prevents selection of vfork()ed
task.  But we don't have any reason to don't consider vfork().

Removed.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: cleanup has_intersects_mems_allowed()
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:39 +0000 (17:19 -0700)]
oom: cleanup has_intersects_mems_allowed()

presently has_intersects_mems_allowed() has own thread iterate logic, but
it should use while_each_thread().

It slightly improve the code readability.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: move OOM_DISABLE check from oom_kill_task to out_of_memory()
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:38 +0000 (17:19 -0700)]
oom: move OOM_DISABLE check from oom_kill_task to out_of_memory()

Presently if oom_kill_allocating_task is enabled and current have
OOM_DISABLED, following printk in oom_kill_process is called twice.

    pr_err("%s: Kill process %d (%s) score %lu or sacrifice child\n",
            message, task_pid_nr(p), p->comm, points);

So, OOM_DISABLE check should be more early.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: kill duplicate OOM_DISABLE check
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:37 +0000 (17:19 -0700)]
oom: kill duplicate OOM_DISABLE check

select_bad_process() and badness() have the same OOM_DISABLE check.  This
patch kills one.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: /proc/<pid>/oom_score treat kernel thread honestly
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:37 +0000 (17:19 -0700)]
oom: /proc/<pid>/oom_score treat kernel thread honestly

If a kernel thread is using use_mm(), badness() returns a positive value.
This is not a big issue because caller take care of it correctly.  But
there is one exception, /proc/<pid>/oom_score calls badness() directly and
doesn't care that the task is a regular process.

Another example, /proc/1/oom_score return !0 value.  But it's unkillable.
This incorrectness makes administration a little confusing.

This patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: oom_kill_process() needs to check that p is unkillable
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:36 +0000 (17:19 -0700)]
oom: oom_kill_process() needs to check that p is unkillable

When oom_kill_allocating_task is enabled, an argument task of
oom_kill_process is not selected by select_bad_process(), It's just
out_of_memory() caller task.  It mean the task can be unkillable.  check
it first.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: make oom_unkillable_task() helper function
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:35 +0000 (17:19 -0700)]
oom: make oom_unkillable_task() helper function

Presently we have the same task check in two places. Unify it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: oom_kill_process() doesn't select kthread child
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:34 +0000 (17:19 -0700)]
oom: oom_kill_process() doesn't select kthread child

Presently select_bad_process() has a PF_KTHREAD check, but
oom_kill_process doesn't.  It mean oom_kill_process() may choose wrong
task, especially, when the child are using use_mm().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agooom: don't try to kill oom_unkillable child
KOSAKI Motohiro [Tue, 10 Aug 2010 00:19:33 +0000 (17:19 -0700)]
oom: don't try to kill oom_unkillable child

Presently, badness() doesn't care about either CPUSET nor mempolicy.  Then
if the victim child process have disjoint nodemask, OOM Killer might kill
innocent process.

This patch fixes it.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>