staging: comedi: dt2801: fix using uninitialized variable warnings

As pointed out by Fengguang Wu, the calls to dt2801_readdata() return the
data read thru a pointer (the address of a local variable) passed as a
parameter. If this local variable is not initialized it produces a warning
during the build of the form:

drivers/staging/comedi/drivers/dt2801.c: In function 'dt2801_ai_insn_read':
drivers/staging/comedi/drivers/dt2801.c:273:14: warning: 'hb' is used
      uninitialized in this function [-Wuninitialized]

Fix these warning by making sure the local variables are initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: COMEDI_NI_ATMIO should select COMEDI_FC

As pointed out by the kbuild test robot, the ni_atmio driver includes
ni_mio_common.c which uses the helper functions in the comedi_fc module.

Select the COMEDI_FC module when COMEDI_NI_ATMIO is enabled to fix the
following build error:

ERROR: "cfc_write_array_to_buffer" [drivers/staging/comedi/drivers/ni_atmio.ko] undefined!

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: put acquired data in buffer for AI command

The asynchronous command support for the AI subdevice is still missing
one crucial element, it doesn't actually put the acquired data in the
buffer so it can be read()!  Call `comedi_buf_put()` from the interrupt
handler to perform this function.  A return value of 0 from
`comedi_buf_put()` means there was no room in the buffer so set the
`COMEDI_CB_OVERFLOW` and `COMEDI_CB_ERROR` event flags in that case.
Otherwise, set the `COMEDI_CB_BLOCK` and `COMEDI_CB_EOS` event flags to
mark the end of a "scan" (the scan length is currently fixed at one
sample in this driver).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: handle cmd->stop_src and stop_arg

The interrupt handler used to support asynchronous commands on the AI
subdevice currently marks the command as finished (setting the "end of
acquisition" event flag and returning to software-triggered acquisition
mode) once it has decremented `devpriv->ntrig` to 0.  However, nothing
sets `devpriv->ntrig`, as noted in the "FIXME" comment.

If the `stop_src` setting of the asynchronous command is `TRIG_COUNT`,
then the `stop_arg` setting indicates the number of scans to be
performed in the overall acquisition.  (Otherwise, `stop_src` will be
`TRIG_NONE`, meaning the acquisition should run indefinitely until
cancelled.)  When starting the acquisition in `pcl711_ai_cmd()`, set
`devpriv->ntrig` to the number of scans to be performed (`stop_arg`) if
`stop_src` is `TRIG_COUNT`.  In the interrupt handler, don't decrement
`devpriv->ntrig` or handle end of acquision unless `stop_src` is
`TRIG_COUNT`.

Also check for an empty acquisition in `pcl711_ai_cmd()`, i.e. one where
`stop_src` is `TRIG_COUNT` and `stop_arg` is zero and just mark end of
acquisition without actually setting up the interrupts in this case.

Also change the type of the `ntrig` member of the private data structure
to `unsigned int` as it should be (same type as `stop_arg`).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: add AI cancel handler

Comedi subdevices that support asynchronous commands should have a
'cancel' handler to stop an in-progress command.  Add such a handler to
the pcl711 driver module.  I think merely setting the acquisition mode
to "software-triggered" would be sufficient, but also clear the
interrupt status for good luck.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: rename 'boardtypes'

'boardtypes' is pretty generic, rename this static const variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: update MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something useful instead of the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: tidy up multi-line comments

Tidy up the multi-line comments to follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: add support for the external interrupt signal

The ACL-6126 board supports an external interrupt signal on pin 17 of
its I/O connector (CN3). Add a new subdevice to this driver to support
asynchronous commands with this input.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: final tidy up of boardinfo

For aesthetics, rearrange the boardinfo struct definition a bit to give
it a bit of logical order.

Also, rename the 'n_aochan' member to it has better visual association
with the other analog output members.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: remove the *_SIZE defines

The *_SIZE defines are only used to initialize the 'io_range' members in
the boardinfo. Remove the defines and just open code the values.

For aesthetics, change the type of the 'io_range' and rename it to better
match the 'len' parameter to comedi_request_region().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: remove unnecessary comments in boardinfo definition

The variable names provided enough information.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: rename boardinfo 'IRQbits'

Rename this CamelCase variable in the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: tidy up the comedi_lrange code

For aesthetics, declare the comedi_lrange tables with one entry per line.

Since the range data in the boardinfo is only for the analog outputs,
rename the variables to make this clearer.

Use ARRAY_SIZE to initialize the 'ao_num_ranges' member instead of open
coding the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: remove digital i/o register offsets from boardinfo

The PCL-727 board uses different register offsets for the digital input and
output ports. Instead of having all the register offsets in the boardinfo,
replace them with a simple bit-field flag, 'is_pcl727'. Use that flag in the
(*insn_bits) functions to determine what registers need to be used.

To save a bit of space, change the 'have_dio' flag in the boardinfo to a
bit-field.

For aesthetics, rename and tidy up the register map defines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: tidy up pcl726_attach()

For aesthetics, add some whitespace to the subdevice initialization.

Only allocate, and initialize, the digital input and output subdevices
if the boardinfo indicates that they exist on the board.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: fix the analog output range_table_list initialization

The analog output channels use jumpers on the board to individually set
the range used. This driver uses the configuration options passed to the
(*attach) function to setup the analog output subdevice range_table_list
for each channel.

The configuration options should be 'it->options[2 + i]' for each channel 'i'
not '...[2 + 1]' for each channel. Fix the error and move the code so that
the range_table_list is setup before the subdevice is initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: enable the interrupt support code

Tidy up and enable the interrupt support code for the external trigger
source interrupt on the ACL-6126 board.

The interrupt handler is currently just a stub function. Once the async
command support is added this function will be completed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: remove all '= 0' boardinfo

Remove all the '= 0' entries in the boardinfo. They will default to 0.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: tidy up pcl726_ao_insn_read()

Tidy up this function to follow the normal form for analog output
read back functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: tidy up pcl726_ao_insn()

For aesthetics, rename the function to help with greps.

The offset binary value from the core should be saved for read back.
Move the saving of the value in the private data so it occurs before
the value is possibly munged for bipolar outputs.

Use the comedi_offset_munge() helper to munge the offset binary value
to two's complement for bipolar outputs.

According to the November 2011 users manual, the write order must be
MSB them LSB. Update the comment.

Modify the register map defines to handle the channel offset calculation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: remove 'bipolar' from the private data

These flags are set in the private data during the attach to indicate
if the range for each channel is bipolar or unipolar. Use the helper
function conedi_chan_range_is_bipolar() to determine this by checking
the range_table_list directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: core: introduce comedi_chan_range_is_{bi,uni}polar()

Introduce two helper functions to check if a subdevice range_table_list
for a given channel/range is bipolar or unipolar.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: convert boardinfo declaration to C99 format

Convert the boardinfo declaration to C99 format to make it less error
prone and easier to maintain.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Remove casting the return value which is a void pointer

Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.

CC: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix typo in rtl8188eu/core

Correct spelling typo in rtl8188eu/core

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be kept; you may remove them yourself if you want to.
# An empty message aborts the commit.
# On branch rtl8188eu-typo2
# Changes to be committed:
# modified:   drivers/staging/rtl8188eu/core/rtw_ap.c
# modified:   drivers/staging/rtl8188eu/core/rtw_br_ext.c
# modified:   drivers/staging/rtl8188eu/core/rtw_cmd.c
# modified:   drivers/staging/rtl8188eu/core/rtw_efuse.c
# modified:   drivers/staging/rtl8188eu/core/rtw_ieee80211.c
# modified:   drivers/staging/rtl8188eu/core/rtw_mlme.c
# modified:   drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
# modified:   drivers/staging/rtl8188eu/core/rtw_security.c
#
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix typo in rtl8188eu/include

Correct spelling typo in rtl8188eu/include

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix typo in rtl8188eu/os_dep

Correct spelling typo in rtl8188eu/os_dep

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix typo in rtl8188eu/hal

Correct spelling typo in rtl8188eu/hal

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: imx-ldb: Staticize of_get_data_mapping()

Staticize of_get_data_mapping() in order to fix the following sparse warning:

drivers/staging/imx-drm/imx-ldb.c:424:11: warning: symbol 'of_get_data_mapping' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Fix man-pages for usbip userspace utilities

The usbip userspace utilities contained some half-documented (only in
--help, not in man) options. They were added to the man-pages of usbip
and usbipd.
Also a typo in the usbip headline was fixed.

Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rt8192u: remove #ifdef RTL8192U in r8192U.h

This patch removes #ifdef RTL8192U header guard and the code that falls
outside it, since RTL8192U is defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove code inside #ifdef RTL8190P in r8190_rtl8256.h

This patch removes the unused code inside #ifdef RTL8190P header guard,
since RTL8190P is not defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove #ifndef RTL8192U and the code inside it

This patch removes the unused code inside #ifndef RTL8192U header guard
and the guard itself, since RTL8192U is defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove #ifndef RTL8190P guard from r8192U_dm.c

This patch removes #ifndef RTL8190P header guard since RTL8190P is not
defined anywhere in rtl8192u code.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove code inside #ifdef RTL8190P in r8192U_dm.c

This patch removes the unused code that resides inside #ifdef RTL8190P
header guard since RTL8190P is not defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove code inside #ifdef RTL8190P in r819xU_firmware.c

This patch removes the unused code that resides inside #ifdef RTL8190P since
RTL8190P is not defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove code inside #ifdef RTL8190P/RTL8192E in r819xU_phy.c

This patch removes the unused code inside #ifdef RTL8190P and #ifdef RTL8192E
guards since RTL8190P and RTL8192E are not defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unused dm_gpio_change_rf_callback()

This patch removes dm_gpio_change_rf_callback() because it is not called
anywhere and it resides inside an #ifdef RTL8192E guard while RTL8192E
is not defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove #ifdef RTL8192U guard in r8192U_dm.c

This patch removes #ifdef RTL8192U header guards from r8192U_dm.c, since
RTL8192U is defined in the included r8192U.h header.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove dm_check_rfctrl_gpio()

This patch removes dm_check_rfctrl_gpio() because it does nothing when
RTL8192U is defined.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: check dev_alloc_skb() return value in fw_download_code()

This patch adds a check whether skb allocation, in fw_download_code(), was
successful.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unused code in fw_download_code()

This patch removes the code that resides outside #ifdef RTL8192U,
since RTL8192U is defined in r8192U.h and removes, also, the header
guard itself.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove cmpk_message_handle_tx()

The function cmpk_message_handle_tx() is called only in r8192U_dm.c in two
places. The first call resides outside an #ifdef RTL8192U guard, and since
RTL8192U is defined this call can be removed. At the other site this function
is called, there is no check on its return value. Since cmpk_message_handle_tx()
does not do anything else other than returning true, it can be safely removed.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unused code from cmpk_message_handle_tx()

The file r819xU_cmdpkt.c includes header r8192U.h which defines RTL8192U.
This patch removes from cmpk_message_handle_tx() the part of the code that
is never used because it resides outside the header guard #ifdef RTL8192U.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: core: coding style - indentation should use tabs

Fixed coding style issue where lines are indented with spaces
instead of tabs.

Signed-off-by: Luis Ortega Perez de Villar <luiorpe1@upv.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: add TODO file

Add TODO file for DWC2 driver

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: add microframe scheduler from downstream Pi kernel

The transfer scheduler in the dwc2 driver is pretty basic, not to
mention buggy. It works fairly well with just a couple of devices
plugged in, but if you add, say, multiple devices with periodic
endpoints, the scheduler breaks down and can't even enumerate all
the devices.

To improve this, import the "microframe scheduler" patch from the
driver in the downstream Raspberry Pi kernel, which is based on
the Synopsys vendor driver. The original patch came from Denx
(http://git.denx.de/?p=linux-denx.git) and was commited to the
raspberrypi.org git tree by "popcornmix" (Dom Cobley).

I have added a driver parameter for this, enabled by default, in
case anyone has problems with it and needs to disable it. I don't
think we should add a DT binding for that, though, since I plan
to remove the option once any bugs are fixed.

[raspberrypi.org patch from Dom Cobley]
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[adapted to dwc2 driver by Paul Zimmerman]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: validate urb->actual_length for OUT endpoints

In dwc2_assign_and_init_hc(), validate urb->actual_length for OUT
endpoints before using the value. This fix is from the Synopsys
vendor driver.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove needless check before usb_free_urb()

usb_free_urb(NULL) is safe and this check is not required.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: crystalhd: Fix assignment of 0/1 to bool variables

Convert 0 to false and 1 to true when assigning values to bool
variables. Inspired by commit 3db1cd5c05f35fb43eb134df6f321de4e63141f2.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@@
bool b;
@@
(
-b = 0
+b = false
|
-b = 1
+b = true
)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging / quickstart: remove reduplicate if(acpi_disabled) check

In acpi_bus_register_driver(), there is an if (acpi_disabled) check,
so the if(acpi_disabled) before it is reduplicate, remove it.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove redundant pci_set_drvdata

Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xxfb: Remove redundant pci_set_drvdata

Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: Remove redundant pci_set_drvdata

Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove redundant pci_set_drvdata

Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Remove redundant pci_set_drvdata

Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: reg: white space deleted

White space deleted before semicolons.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: reg: erased trailing whitespace

Erased all the errors given by checkpatch stating trailing whitespace.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: phy_calibration: second of the patches that fixes lines over 80 characters

Second of the patches that fixes the lines over 80 characters in phy_calibration.c

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: phy_calibration: first of the patches that fixes lines over 80 characters

First of the patches that fixes the lines over 80 characters in phy_calibration.c

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: mto: deleted extern functions

Deleted declaration of external functions that weren't used on this driver.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: mto: avoided use of extern functions

Prototype of two functions added to the header to avoid the use of extern.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: mto: removed function declaration

The following function declarations have been removed because they aren't implemented.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Fix IPv6 support in usbipd

getaddrinfo() leaves the order of the returned addrinfo structs
unspecified. On systems with bindv6only disabled (this is the default),
PF_INET6 sockets bind to IPv4, too. Thus, IPv6 support in usbipd was
broken when getaddrinfo returned first IPv4 and then IPv6 addrinfos, as
the IPv6 bind failed with EADDRINUSE.

This patch uses seperate sockets for IPv4 and IPv6 and sets IPV6_V6ONLY
on all IPv6 sockets. Two command line arguments, -4 and -6 were added to
manually select the socket family.

Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Fix build on Debian ppc

One missing include was added.

Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Fix build with --with-tcp-wrappers

With --with-tcp-wrappers=no specified, the build system reset LIBS to
the empty string and thus fails to link against libsysfs.

Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: usbip: stub_dev: Fixed checkpatch warnings

Coding style issues

Signed-off-by: Elad Wexler <eladwexler77@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: vhci_hcd: remove check for dma

vhci_hcd is a virtual usb host controller, so no need to
check for dma.

Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: vhci_hcd: correctly handle return value

ret == 0 means success, anything else is failure.

Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: stub_main: correctly handle return value

ret == 0 means success, anything else is failure.

Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: remove unnecessary work pending test

Remove unnecessary work pending test before calling schedule_work().
It has been tested in queue_work_on() already. No functional changed.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Jens Frederich <jfrederich@gmail.com>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Change variable type to bool

The variable ownbit_flag is only assigned the values true and false.
Change its type to bool.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@exists@
type T;
identifier b;
@@
- T
+ bool
  b = ...;
  ... when any
  b = \(true\|false\)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Change variable type to bool

The variables bMultiBand and bKeyTableFull are only assigned the
values true and false. Change its type to bool.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@exists@
type T;
identifier b;
@@
- T
+ bool
  b = ...;
  ... when any
  b = \(true\|false\)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: winbond: Change variable type to bool

The variable Trigger is only assigned the values true and false.
Change its type to bool.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@exists@
type T;
identifier b;
@@
- T
+ bool
  b = ...;
  ... when any
  b = \(true\|false\)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: PHSModule.c: Matching the function definition with function declaration

The function implementations of the PHSModule didn't match with the declaration. The functions are static
in the declaration but in the implemntation they are non-static

Signed-off-by: Shalin Mehta <shalinmehta85@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx.c s_vGenerateTxParameter replace pTxBufHead void pointer.

with struct vnt_tx_buffer and attach vnt_tx_fifo_head to pTX_Buffer structure.

The the calling pbyTxBufferAddr points to the same address as
vnt_tx_buffer->fifo_head and is still in use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: desc.h remove typedef struct tagSTxBufHead to rxtx.h

In code it is referred to as fifo to renamed to
typedef struct tagSTxBufHead -> struct vnt_tx_fifo_head

This is only needed by rxtc.c so moved to rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix typo in rtl8192e/dot11d.h

Correct spelling typo in comment

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: vt6656: Fix typo in comments

Correct spelling typo in staging/vt6655 and staging/vt6656

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix typo in staging/octeon

Correct spelling typo in staging/octeon

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: netlogic.h: removed WARNING: extern prototypes should be avoided in .h files

removed checpatch warning : WARNING: extern prototypes should be avoided in .h files

Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: fix switch case statement indenting

This is a patch to lvfs_linux.c that fixes incorrect switch case statement
indenting found by checkpatch.pl.

Signed-off-by: Jon Bernard <jbernard@tuxion.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: remove assignment in if conditions

This is a patch to lvfs_linux.c that removes the use of variable assignment
within an if condition found by checkpatch.pl.

Signed-off-by: Jon Bernard <jbernard@tuxion.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix typo in lustre/llite

Correct spelling typo in lustre/llite
Correct double words "to to"

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix typo in lustre/libcfs

Correct spelling typos in comment and debug message,
within  luster/libcfs

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: tty.c: removes smatch warnings "redundant null check"

This patch removes these smatch warnings:
redundant null check on dgap_TmpWriteBuf calling kfree()
redundant null check on brd->SerialDriver->ttys calling kfree()
redundant null check on brd->PrintDriver->ttys calling kfree()

The code checked to see if these variables are null
before freeing. This check isn't needed.

Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: tty.c: removes smatch warning "ignoring unreachable code"

This patch removes this smatch warning:
info: ignoring unreachable code.

There were instances where there was extra code after
the default action in switch statements. These default
actions ended with a break so the code wasn't being run
at anytime. This patch removes that extra code.

Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: driver.c: removes smatch warning "redundant null check"

This patch removes these smatch warnings from dgap_driver.c:

redundant null check on dgap_config_buf calling kfree()
redundant null check on brd->flipbuf calling kfree()
redundant null check on brd->flipflagbuf calling kfree()

Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: dgap: move DG_NAME and DG_PART from "Makefile" to "dgap_driver.h"

Normally, the macros from command line are system specific macros (e.g
__linux, __KERNEL__ ...), and module own macros are usually defined in
their header files.

DG_NAME and DG_PART are driver 'dgap' owned macros which are used by
multiple files within driver, and need be defined in the driver main
header file.

So move DG_NAME and DG_PART to "dgap_driver.h", it not only can make
code clearer, but also can avoid compiling failure when EXTRA_CFLAGS
appended to make command line (e.g. "EXTRA_CFLAGS=-W").

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: removes LINUX_VERSION_CODE conditionals

This patch removes the conditionals that make sure
the driver supports various versions of the kernel.
They aren't needed.

Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: change MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something useful instead of the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: reorder includes

For aesthetics, reorder the includes a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: tidy up multi line comments

Tidy up the multi line comments to follow the CodingStyle.

Remove the multi line comment about an alternate driver for the
PCL-711. The http address does not work and the driver history
in the comment is unnecessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: rename some of the register map defines

Rename some of the register map defines so they all have the same
format. Add a couple new defines to tidy up some of the magic
numbers used with the registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: no need to calc the timer values twice

The comedi core always calls the (*do_cmdtest) function to validate
a command before it calls the (*do_cmd) function.

Since the (*do_cmdtest) has already calculated the timer values in
order to validate the cmd->scan_begin_arg there is no reason to
recalc the values in the (*do_cmd).

This also fixes a bug in the driver. The (*do_cmdtest) was using a
time base value of 100 and but the (*do_cmd) was using a time base
of 500. These result in different timer values. The functions used
to calculate the values are actually the same due to a #define in
the 8253.h header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: remove 'i8253_osc_base'

This static const int variable is only used one place in the code.
Remove it and just open code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: use 8253.h helper to set the timers

To better document the code, use the i8254_load() helper to set the
timers instead of doing the outb() instructions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: remove unused private data members

Remove all the private data variables that are not used by the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: remove 'is_pcl711b' from boardinfo

This member in the board info is used to indicate if the board is
a PCL711B. This board uses bits in the mode register to select the
IRQ used for interrupts. These bits do nothing on the other boards
supported by this driver.

Remove the 'is_pcl711b' variable from the boardinfo. Also, remove
the 'mode' variable from the private data and just calculate the
mode bits when needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>