Yinghai Lu [Sat, 3 Jan 2009 08:06:34 +0000 (00:06 -0800)]
sparseirq: move set/get_timer_rand_state back to .c
those two functions only used in that C file
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 3 Jan 2009 20:00:07 +0000 (12:00 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: warn about voltage mismatches
mmc_spi: Add support for OpenFirmware bindings
pxamci: fix dma_unmap_sg length
mmc_block: ensure all sectors that do not have errors are read
drivers/mmc: Move a dereference below a NULL test
sdhci: handle built-in sdhci with modular leds class
mmc: balanc pci_iomap with pci_iounmap
mmc_block: print better error messages
mmc: Add mmc_vddrange_to_ocrmask() helper function
ricoh_mmc: Handle newer models of Ricoh controllers
mmc: Add 8-bit bus width support
sdhci: activate led support also when module
mmc: trivial annotation of 'blocks'
pci: use pci_ioremap_bar() in drivers/mmc
sdricoh_cs: Add support for Bay Controller devices
mmc: at91_mci: reorder timer setup and mmc_add_host() call
Linus Torvalds [Sat, 3 Jan 2009 19:59:13 +0000 (11:59 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] Add support for the WM8350 watchdog
[WATCHDOG] Add SMSC SCH311x Watchdog Timer.
[WATCHDOG] ib700wdt - add timeout parameter
Linus Torvalds [Sat, 3 Jan 2009 19:56:24 +0000 (11:56 -0800)]
Merge branch 'cputime' of git://git390.osdl.marist.edu/linux-2.6
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID
[PATCH] improve idle cputime accounting
[PATCH] improve precision of idle time detection.
[PATCH] improve precision of process accounting.
[PATCH] idle cputime accounting
[PATCH] fix scaled & unscaled cputime accounting
Linus Torvalds [Sat, 3 Jan 2009 19:46:17 +0000 (11:46 -0800)]
Make %p print '(null)' for NULL pointers
Before, when we only ever printed out the pointer value itself, a NULL
pointer would never cause issues and might as well be printed out as
just its numeric value.
However, with the extended %p formats, especially %pR, we might validly
want to print out resources for debugging. And sometimes they don't
even exist, and the resource pointer is just NULL. Print it out as
such, rather than oopsing.
This is a more generic version of a patch done by Trent Piepho (catching
all %p cases rather than just %pR, and using "(null)" instead of
"[NULL]" to match glibc).
Requested-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:33 +0000 (07:16 +0000)]
get rid of special-casing the /sbin/loader on alpha
... just make it a binfmt handler like #! one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:23 +0000 (07:16 +0000)]
sanitize ifdefs in binfmt_aout
They are actually alpha vs. i386/arm/m68k i.e. ecoff vs. aout.
In the only place where we actually tried to handle arm and i386/m68k in
different ways (START_DATA() in coredump handling), the arm variant
works for all of them (i386 and m68k have u.start_code set to 0).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:13 +0000 (07:16 +0000)]
remove the rudiment of a.out for sparc
it's been used only in sunos compat
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Blemings [Sat, 3 Jan 2009 05:48:44 +0000 (16:48 +1100)]
Updated contact info for CREDITS file
This updates some personal info in the CREDITS file.
I'm no longer actively involved in Keyspan driver work so shouldn't
really be listed as a Maintainer here.
I do however field the occasional question on them and as I'm dropping
the misc.nu domain, want to ensure people can find me should they need
to.
Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jan 2009 23:57:47 +0000 (15:57 -0800)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (33 commits)
UBIFS: add more useful debugging prints
UBIFS: print debugging messages properly
UBIFS: fix numerous spelling mistakes
UBIFS: allow mounting when short of space
UBIFS: fix writing uncompressed files
UBIFS: fix checkpatch.pl warnings
UBIFS: fix sparse warnings
UBIFS: simplify make_free_space
UBIFS: do not lie about used blocks
UBIFS: restore budg_uncommitted_idx
UBIFS: always commit on unmount
UBIFS: use ubi_sync
UBIFS: always commit in sync_fs
UBIFS: fix file-system synchronization
UBIFS: fix constants initialization
UBIFS: avoid unnecessary calculations
UBIFS: re-calculate min_idx_size after the commit
UBIFS: use nicer 64-bit math
UBIFS: fix available blocks count
UBIFS: various comment improvements and fixes
...
Linus Torvalds [Fri, 2 Jan 2009 23:57:26 +0000 (15:57 -0800)]
Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6:
UBI: fix checkpatch.pl warnings
UBI: simplify PEB protection code
UBI: prepare for protection tree improvements
UBI: return -ENOMEM upon failing vmalloc
UBI: document UBI ioctls
UBI: handle write errors in WL worker
UBI: fix error path
UBI: some code re-structuring
UBI: fix deadlock
UBI: fix warnings when debugging is enabled
Linus Torvalds [Fri, 2 Jan 2009 23:56:54 +0000 (15:56 -0800)]
Merge git://git./linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next:
kbuild: ignore a few files in headers_check
kbuild: add checks for include of linux/types in userspace headers
kbuild: drop debugging leftover in tags.sh
kbuild: document environment variables
kbuild: make *config usage docs
kbuild: disable sparse warning "returning void-valued expression"
kbuild: in headers_install autoconvert asm/inline/volatile to __xxx__
kbuild: check for leaked CONFIG_ symbols to userspace
headers_check.pl: disallow extern's
kconfig: improve error messages for bad source statements
kconfig: struct property commented
kconfig: add comments to symbol flags
kconfig: explain symbol value defaults
m68k: fix recursive dependency in Kconfig
Linus Torvalds [Fri, 2 Jan 2009 23:33:12 +0000 (15:33 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
x86: mpparse.c fix style problems
x86: nmi.c fix style problems
x86: ldt.c fix style problems
x86: cpuid.c fix style problems
x86, UV: remove erroneous BAU initialization
x86: fix incorrect __read_mostly on _boot_cpu_pda
x86: convert permanent_kmaps_init() from macro to inline
x86: early_printk - use sizeof instead of hardcoded number
x86: xsave.c: restore_user_xstate should be static
x86: uv_bau.h: fix dubious bitfield
x86: apic.c: xapic_icr_read and x2apic_icr_read should be static
x86: bios_uv.c: uv_systab should be static
x86: genx2apic_phys.c: x2apic_send_IPI_self and init_x2apic_ldr should be static
x86: amd_iommu.c: prealloc_protection_domains should be static
x86: amd_iommu_init.c: iommu_enable and iommu_enable_event_logging should be static
x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.h
x86_64: pci-gart_64.c iommu_fullflush should be static
x86: efi.c declare add_efi_memmap before they get used
x86: io_apic.c io_apic_sync should be static
x86: apic.c declare pic_mode before they get used
...
Ingo Molnar [Fri, 2 Jan 2009 21:41:52 +0000 (22:41 +0100)]
Merge branches 'x86/cleanups', 'x86/fpu' and 'x86/urgent' into x86/core
Ingo Molnar [Fri, 2 Jan 2009 21:41:36 +0000 (22:41 +0100)]
Merge branch 'linus' into x86/cleanups
Conflicts:
arch/x86/kernel/reboot.c
Ingo Molnar [Fri, 2 Jan 2009 17:53:14 +0000 (18:53 +0100)]
Disallow gcc versions 3.{0,1}
GCC 3.0 and 3.1 are too old to build a working kernel.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ This check got dropped as obsolete when I simplified the gcc header
inclusion mess in
f153b82121b0366fe0e5f9553545cce237335175, but Willy
Tarreau reports actually having those old versions still.. -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jan 2009 19:44:09 +0000 (11:44 -0800)]
Merge branch 'cpus4096-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
x86: export vector_used_by_percpu_irq
x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
sched: nominate preferred wakeup cpu, fix
x86: fix lguest used_vectors breakage, -v2
x86: fix warning in arch/x86/kernel/io_apic.c
sched: fix warning in kernel/sched.c
sched: move test_sd_parent() to an SMP section of sched.h
sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
sched: activate active load balancing in new idle cpus
sched: bias task wakeups to preferred semi-idle packages
sched: nominate preferred wakeup cpu
sched: favour lower logical cpu number for sched_mc balance
sched: framework for sched_mc/smt_power_savings=N
sched: convert BALANCE_FOR_xx_POWER to inline functions
x86: use possible_cpus=NUM to extend the possible cpus allowed
x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
x86: update io_apic.c to the new cpumask code
x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
x86: xen: use smp_call_function_many()
x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
...
Fixed up trivial conflict in kernel/time/tick-sched.c manually
Sam Ravnborg [Wed, 31 Dec 2008 08:32:30 +0000 (09:32 +0100)]
kbuild: ignore a few files in headers_check
The new check for asm/types.h and linux/types.h had
a few false positives.
o We cannot let linux/types.h include linux/types.h
o The int-ll64.h and int-ll64.h define the types
and are included by linux/types.h
Handle this by hardcoding the filenames in the headers_check script.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Tue, 30 Dec 2008 10:34:58 +0000 (11:34 +0100)]
kbuild: add checks for include of linux/types in userspace headers
If we see __[us](8|16|32|64) then we must include <linux/types.h>
If wee see include of <asm/types.h> then we recommend <linux/types.h>
Original script from Mike but modified by me.
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Tue, 30 Dec 2008 09:20:08 +0000 (10:20 +0100)]
kbuild: drop debugging leftover in tags.sh
Noticed by Jike.
Reported-by: "Jike Song" <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Mon, 29 Dec 2008 12:45:52 +0000 (13:45 +0100)]
kbuild: document environment variables
Add kbuild.txt to Documentation/kbuild
More stuff can be added later - at least we have
som of the varous environment variables documented now.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Randy Dunlap [Fri, 29 Feb 2008 22:21:53 +0000 (14:21 -0800)]
kbuild: make *config usage docs
Create a kconfig user assistance guide, with a few tips and hints
about using menuconfig, xconfig, and gconfig.
Mostly contains user interface, environment variables, and search topics,
along with mini.config/custom.config usage.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Hannes Eder [Sat, 27 Dec 2008 21:38:44 +0000 (22:38 +0100)]
kbuild: disable sparse warning "returning void-valued expression"
The sparse warning -Wreturn-void ("returning void-valued expression")
is off by default, but it is enabled with -Wall, so add
-Wno-return-void to CHECKFLAGS to disable it.
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Mike Frysinger [Sat, 27 Dec 2008 08:23:15 +0000 (03:23 -0500)]
kbuild: in headers_install autoconvert asm/inline/volatile to __xxx__
Headers in userspace should be using the __xxx__ form of the asm, inline,
and volatile keywords. Since people like to revert these things without
realizing what's going on, have the headers install step autoconvert these
keywords.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Sat, 27 Dec 2008 18:52:20 +0000 (19:52 +0100)]
kbuild: check for leaked CONFIG_ symbols to userspace
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Mike Frysinger [Sat, 27 Dec 2008 07:43:36 +0000 (02:43 -0500)]
headers_check.pl: disallow extern's
Since prototypes with "extern" refer to kernel functions, they make no
sense in userspace, so reject them automatically.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: made it into a warning]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Sat, 27 Dec 2008 20:51:59 +0000 (21:51 +0100)]
kconfig: improve error messages for bad source statements
We now say where we detect the second source of a file,
and where we detect a recursively source of the same file.
This makes it easier to fix such errors.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Sam Ravnborg [Fri, 26 Dec 2008 20:32:31 +0000 (21:32 +0100)]
kconfig: struct property commented
No functional changes
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 26 Dec 2008 20:25:00 +0000 (21:25 +0100)]
kconfig: add comments to symbol flags
No functional changes - only comments.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 26 Dec 2008 20:07:57 +0000 (21:07 +0100)]
kconfig: explain symbol value defaults
Added a few comments - no functional change.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Fri, 26 Dec 2008 21:41:18 +0000 (22:41 +0100)]
m68k: fix recursive dependency in Kconfig
We had a recursive dependency between MMU_MOTOROLA and MMU_SUN3
Fix it by dropping the unused dependencies on MMU_MOTOROLA.
MMU_MOTOROLA is set to y only using select so any dependencies
are anyway ignored.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Linus Torvalds [Fri, 2 Jan 2009 19:41:11 +0000 (11:41 -0800)]
Merge branch 'kvm-updates/2.6.29' of git://git./linux/kernel/git/avi/kvm
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits)
KVM: MMU: handle large host sptes on invlpg/resync
KVM: Add locking to virtual i8259 interrupt controller
KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared
MAINTAINERS: Maintainership changes for kvm/ia64
KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs()
KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI
KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip
KVM: fix handling of ACK from shared guest IRQ
KVM: MMU: check for present pdptr shadow page in walk_shadow
KVM: Consolidate userspace memory capability reporting into common code
KVM: Advertise the bug in memory region destruction as fixed
KVM: use cpumask_var_t for cpus_hardware_enabled
KVM: use modern cpumask primitives, no cpumask_t on stack
KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus
KVM: set owner of cpu and vm file operations
anon_inodes: use fops->owner for module refcount
x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj
KVM: MMU: prepopulate the shadow on invlpg
KVM: MMU: skip global pgtables on sync due to cr3 switch
KVM: MMU: collapse remote TLB flushes on root sync
...
Linus Torvalds [Fri, 2 Jan 2009 18:32:18 +0000 (10:32 -0800)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits)
ide-atapi: start dma in a drive-specific way
ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc
ide-atapi: remove timeout arg to ide_issue_pc
ide-cd: remove handler wrappers
ide-cd: remove xferlen arg to cdrom_start_packet_command
ide-atapi: split drive-specific functionality in ide_issue_pc
ide-atapi: assign expiry and timeout based on device type
ide-atapi: compute cmd_len based on device type in ide_transfer_pc
ide: remove the last ide-scsi remnants
ide-atapi: remove ide-scsi remnants from ide_pc_intr()
ide-atapi: remove ide-scsi remnants from ide_transfer_pc()
ide-atapi: remove ide-scsi remnants from ide_issue_pc
ide-cd: move cdrom_timer_expiry to ide-atapi.c
ide-atapi: teach ide atapi about drive->waiting_for_dma
ide-atapi: accomodate transfer length calculation for ide-cd
ide-atapi: setup dma for ide-cd
ide-atapi: combine drive-specific assignments
ide-atapi: add a dev_is_idecd-inline
remove ide-scsi
ide-floppy: allocate only toplevel packet commands
...
Linus Torvalds [Fri, 2 Jan 2009 18:31:04 +0000 (10:31 -0800)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (31 commits)
uwb: remove beacon cache entry after calling uwb_notify()
uwb: remove unused include/linux/uwb/debug.h
uwb: use print_hex_dump()
uwb: use dev_dbg() for debug messages
uwb: fix memory leak in uwb_rc_notif()
wusb: fix oops when terminating a non-existant reservation
uwb: fix oops when terminating an already terminated reservation
uwb: improved MAS allocator and reservation conflict handling
wusb: add debug files for ASL, PZL and DI to the whci-hcd driver
uwb: fix oops in debug PAL's reservation callback
uwb: clean up whci_wait_for() timeout error message
wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive
uwb: remove unused beacon group join/leave events
wlp: start/stop radio on network interface up/down
uwb: add basic radio manager
uwb: add pal parameter to new reservation callback
uwb: fix races between events and neh timers
uwb: don't unbind the radio controller driver when resetting
uwb: per-radio controller event thread and beacon cache
uwb: add commands to add/remove IEs to the debug interface
...
Paul Mackerras [Fri, 2 Jan 2009 04:40:55 +0000 (15:40 +1100)]
Update powerpc maintainers
Ben Herrenschmidt is taking over as the primary powerpc architecture
maintainer. I'll still be around as his backup/deputy.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jan 2009 18:28:41 +0000 (10:28 -0800)]
Merge branch 'i8k-updates' from Alan
* i8k-updates:
i8k: Add Dell Vostro systems
i8k: Enable i8k on Dell Precision Systems
Federico Heinz [Fri, 2 Jan 2009 16:19:23 +0000 (16:19 +0000)]
i8k: Add Dell Vostro systems
This trivial patch adds support for i8k on the new Dell Vostro models.
I tested it on my Vostro 1400, and it works. It does print a warning
when loading the module:
i8k: unable to get SMM BIOS version
But I couldn't figure out how to fix that. The module seems to work fine,
anyway...
Signed-off-by: Federico Heinz <fheinz@vialibre.org.ar>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Spencer [Fri, 2 Jan 2009 16:19:13 +0000 (16:19 +0000)]
i8k: Enable i8k on Dell Precision Systems
Patch to enable i8k on Dell Precisions.
Signed-off-by: Andy Spencer <spenceal@rose-hulman.edu>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Brueckl [Fri, 2 Jan 2009 13:42:00 +0000 (14:42 +0100)]
Fix compiler warning in arch/x86/mm/init_32.c
Signed-off-by: Ingo Brueckl <ib@wupperonline.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jan 2009 18:25:51 +0000 (10:25 -0800)]
Merge branch 'tty-updates' from Alan
* tty-updates: (75 commits)
serial_8250: support for Sealevel Systems Model 7803 COMM+8
hso maintainers update patch
hso modem detect fix patch against Alan Cox'es tty tree
tty: Fix an ircomm warning and note another bug
drivers/char/cyclades.c: cy_pci_probe: fix error path
Serial: UART driver changes for Cavium OCTEON.
Serial: Allow port type to be specified when calling serial8250_register_port.
8250: Serial driver changes to support future Cavium OCTEON serial patches.
8250: Don't clobber spinlocks.
fix for tty-serial-move-port
tty: We want the port object to be persistent
__FUNCTION__ is gcc-specific, use __func__
serial: RS485 ioctl structure uses __u32 include linux/types.h
tty: Drop the lock_kernel in the private ioctl hook
synclink_cs: Convert to tty_port
tty: use port methods for the rocket driver
tty: kref the rocket driver
tty: make rocketport use standard port->flags
tty: Redo the rocket driver locking
tty: Make epca use the port helpers
...
Jaswinder Singh Rajput [Fri, 2 Jan 2009 18:13:25 +0000 (23:43 +0530)]
x86: mpparse.c fix style problems
Impact: cleanup, fix style problems, more readable
Fixes style problems:
WARNING: Use #include <linux/smp.h> instead of <asm/smp.h>
WARNING: Use #include <linux/acpi.h> instead of <asm/acpi.h>
WARNING: suspect code indent for conditional statements (8, 17)
WARNING: space prohibited between function name and open parenthesis '('
total: 0 errors, 5 warnings
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Flavio Leitner [Fri, 2 Jan 2009 13:50:43 +0000 (13:50 +0000)]
serial_8250: support for Sealevel Systems Model 7803 COMM+8
Add support for Sealevel Systems Model 7803 COMM+8
Signed-off-by: Flavio Leitner <fleitner@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Denis Joseph Barrow [Fri, 2 Jan 2009 13:50:36 +0000 (13:50 +0000)]
hso maintainers update patch
Added D.J. Barrow as maintainer of hso driver.
Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Denis Joseph Barrow [Fri, 2 Jan 2009 13:50:29 +0000 (13:50 +0000)]
hso modem detect fix patch against Alan Cox'es tty tree
Fixed incorrect check for the modem port, this prevents
crashes caused by issueing a tiocmget_submit_urb
on endpoints which don't exist for non modem devices.
Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:50:20 +0000 (13:50 +0000)]
tty: Fix an ircomm warning and note another bug
Roel Kluin noted that line is unsigned so one test is unneccessary. Also
add a warning for another flaw I noticed while making this change.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 2 Jan 2009 13:50:07 +0000 (13:50 +0000)]
drivers/char/cyclades.c: cy_pci_probe: fix error path
We forgot to release resources in one case.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12137
Reported-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Fri, 2 Jan 2009 13:50:00 +0000 (13:50 +0000)]
Serial: UART driver changes for Cavium OCTEON.
Cavium UART implementation is not covered by existing uart_configS.
Define a new uart_config (PORT_OCTEON) which is specified by OCTEON
platform device registration code.
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Fri, 2 Jan 2009 13:49:54 +0000 (13:49 +0000)]
Serial: Allow port type to be specified when calling serial8250_register_port.
Add flag value UPF_FIXED_TYPE which specifies that the UART type is
known and should not be probed. For this case the UARTs properties
are just copied out of the uart_config entry.
This allows us to keep SOC specific 8250 probe code out of 8250.c. In
this case we know the serial hardware will not be changing as it is on
the same silicon as the CPU, and we can specify it with certainty in
the board/cpu setup code.
The alternative is to load up 8250.c with a bunch of OCTEON specific
special cases in the probing code.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Fri, 2 Jan 2009 13:49:47 +0000 (13:49 +0000)]
8250: Serial driver changes to support future Cavium OCTEON serial patches.
In order to use Cavium OCTEON specific serial i/o drivers, we first
patch the 8250 driver to use replaceable I/O functions. Compatible
I/O functions are added for existing iotypeS.
An added benefit of this change is that it makes it easy to factor
some of the existing special cases out to board/SOC specific support
code.
The alternative is to load up 8250.c with a bunch of OCTEON specific
iotype code and bug work-arounds.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Fri, 2 Jan 2009 13:49:41 +0000 (13:49 +0000)]
8250: Don't clobber spinlocks.
In serial8250_isa_init_ports(), the port's lock is initialized. We
should not overwrite it. In early_serial_setup(), only copy in the
fields we need. Since the early console code only uses a subset of
the fields, these are sufficient.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Beregalov [Fri, 2 Jan 2009 13:49:32 +0000 (13:49 +0000)]
fix for tty-serial-move-port
Hi Alan
next-
20081204 crashes with the following message:
BUG: unable to handle kernel paging request at
ffff88007d320248
IP: [<
ffffffff803de934>] uart_remove_one_port+0xef/0x111
kfree(info);
393: 49 8d 7d 10 lea 0x10(%r13),%rdi
397: e8 00 00 00 00 callq 39c <uart_remove_one_port+0xef>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:49:21 +0000 (13:49 +0000)]
tty: We want the port object to be persistent
Move the tty_port and uart_info bits around a little. By embedding the uart_info
into the uart_port we get rid of lots of corner case testing and also get the
ability to go port<->state<->info which is a bit more elegant than the current
data structures.
Downsides - we allocate a tiny bit more memory for unused ports, upside we've
removed as much code as it saved for most users..
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harvey Harrison [Fri, 2 Jan 2009 13:49:13 +0000 (13:49 +0000)]
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Fri, 2 Jan 2009 13:49:04 +0000 (13:49 +0000)]
serial: RS485 ioctl structure uses __u32 include linux/types.h
In the commit below a new struct serial_rs485 was introduced for a new
ioctl:
commit
c26c56c0f40e200e61d1390629c806f6adaffbcc
Author: Alan Cox <alan@redhat.com>
Date: Mon Oct 13 10:37:48 2008 +0100
tty: Cris has a nice RS485 ioctl so we should steal it
This structure uses the __u32 types for some of its members, which leads
to the following compile error:
$ cc -I.../include -c X.c
In file included from X.c:2: .../include/linux/serial.h:185:
error: expected specifier-qualifier-list before ‘__u32’
$
It seems that these types are appropriate for this structure as it is
to be exposed to userspace. These types are available via linux/types.h
so move the include of that outside the __KERNEL__ section.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:56 +0000 (13:48 +0000)]
tty: Drop the lock_kernel in the private ioctl hook
We don't need the BKL here any more so it can go. In a couple of spots the
driver requirements are not clear so push the lock down into the driver.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:47 +0000 (13:48 +0000)]
synclink_cs: Convert to tty_port
Use the tty port operations, add refcounting, and refactor a bit to make the
refcounting work cleanly.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:39 +0000 (13:48 +0000)]
tty: use port methods for the rocket driver
Now we have our ducks in order we can begin switching to the port
operations
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:30 +0000 (13:48 +0000)]
tty: kref the rocket driver
We will need this kref fitted to make full use of the port operations.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:23 +0000 (13:48 +0000)]
tty: make rocketport use standard port->flags
We need to this ready for using the standard helpers
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:17 +0000 (13:48 +0000)]
tty: Redo the rocket driver locking
Bring this driver into the port locking model
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:11 +0000 (13:48 +0000)]
tty: Make epca use the port helpers
Now the locking is straight and the port kref usage is straight we can
replace lots of chunks of code with the standard port helpers
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:48:04 +0000 (13:48 +0000)]
tty: refcount the epca driver
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:58 +0000 (13:47 +0000)]
tty: relock epca
Bring epca into line with the port locking.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Denis Joseph Barrow [Fri, 2 Jan 2009 13:47:52 +0000 (13:47 +0000)]
tty: Modem functions for the HSO driver
Makes TIOCM ioctls for Data Carrier Detect & related functions
work like /drivers/serial/serial-core.c potentially needed
for pppd & similar user programs.
Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:45 +0000 (13:47 +0000)]
tty: Fix the HSO termios handling a bit
Init the tty structure once
Don't set ->low_latency twice in a row
Don't force bits we should be leaving to the user
Don't allocate termios arrays as these are in fact allocated by the tty layer
for you and just overwrite the ones allocated in the driver
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:39 +0000 (13:47 +0000)]
hso: net driver using tty without locking
Checking tty == NULL doesn't help us unless we have a clear semantic for
the locking of the tty object in the driver. Use the tty kref objects so that
we can take references to the tty in the USB event handling paths.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:32 +0000 (13:47 +0000)]
tty: kref nozomi
Update the nozomi driver to use krefs
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:26 +0000 (13:47 +0000)]
tty: Remove some pointless casts
disc_data and driver_data are void *
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:20 +0000 (13:47 +0000)]
tty: PTYs set TTY_DO_WRITE_WAKEUP when they don't need to
The write wakeup is done anyway for the poll while DO_WRITE_WAKUP is
cleared, set and managed by the ldisc layer and is no business of the pty
code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Pfaff [Fri, 2 Jan 2009 13:47:13 +0000 (13:47 +0000)]
tty: N_TTY SIGIO only works for read
The N_TTY ldisc layer does not send SIGIO POLL_OUTs correctly when output is
possible due to flawed handling of the TTY_DO_WRITE_WAKEUP bit. It will
either send no SIGIOs at all or on every tty wakeup.
The fix is to set the bit when the tty driver write would block and test
and clear it on write wakeup.
[Merged with existing N_TTY patches and a small buglet fixed -- Alan]
Signed-off-by: Thomas Pfaff <tpfaff@pcs.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:47:06 +0000 (13:47 +0000)]
tty: USB tty devices can block in tcdrain when unplugged
The underlying problem is that the device methods don't all correctly
handle disconnected status and some keep reporting bytes pending which
causes tcdrain to stall.
When the cable is unplugged they are definitely gone, and as this is true
for all USB cables we can fix it in the core usb serial code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Fri, 2 Jan 2009 13:46:58 +0000 (13:46 +0000)]
serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter
The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual
16950 Serial adapter" is only usable with other devices (i.e. not the same
card) after doing a "setserial /dev/ttyS<n> baud_base 115200". This
baud_base should be default for this card.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:50 +0000 (13:46 +0000)]
tty: Introduce some close helpers for ports
Again this is a lot of common code we can unify
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:43 +0000 (13:46 +0000)]
tty: tty port zero baud open
If we have no speed set at some point then we should not raise DTR/RTS at
that point when opening as the tty is not ready
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:34 +0000 (13:46 +0000)]
tty: ESP has been broken for locking etc forver
Mark it broken
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:24 +0000 (13:46 +0000)]
tty: rework stallion to use the tty_port bits
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:18 +0000 (13:46 +0000)]
tty: Rework istallion to use the tty port changes
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:46:10 +0000 (13:46 +0000)]
tty: Introduce a tty_port generic block_til_ready
Start sucking more commonality out of the drivers into a single piece of
core code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:58 +0000 (13:45 +0000)]
tty: relock the mxser driver
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:50 +0000 (13:45 +0000)]
tty: relock riscom8 using port locks
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:44 +0000 (13:45 +0000)]
tty: rocketport uses different port flags to everyone else
Normalise them so we can use the common helpers later on
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:36 +0000 (13:45 +0000)]
tty: relock generic_serial
Switch generic_serial to do port count locking via the tty_port structure
ready for moving to a common port wait routine. Keep the old driver lock for
internal calling so we don't risk messing up the drivers below until we
are ready.
Still needs kref conversions
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:26 +0000 (13:45 +0000)]
isicom: redo locking to use tty port locks
This helps set the basis for moving block_til_ready into common code. We also
introduce a tty_port_hangup helper as this will also be generally needed.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:19 +0000 (13:45 +0000)]
tty: Pull the dtr raise into tty port
This moves another per device special out of what should be shared open
wait paths into private methods
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:12 +0000 (13:45 +0000)]
rio: Kill off ckmalloc
This was an alloc/clear wrapper but makes even less sense now it uses
kzalloc. Kill it off.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:45:05 +0000 (13:45 +0000)]
tty_port: Add a port level carrier detect operation
This is the first step to generalising the various pieces of waiting logic
duplicated in all sorts of serial drivers.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:44:56 +0000 (13:44 +0000)]
tty: Fix PPP hang under load
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 2 Jan 2009 13:44:49 +0000 (13:44 +0000)]
CRED: Wrap task credential accesses in the devpts filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hao [Fri, 2 Jan 2009 13:44:34 +0000 (13:44 +0000)]
Add device function for USB serial console
Add device funtion for usb serial console, so we can open /dev/console
when we use a usb serial device as console.
(Typecast removed as noted by Sergei Shtylyov)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Fri, 2 Jan 2009 13:44:27 +0000 (13:44 +0000)]
And here's a patch (to be applied on top of the last) which prevents
this happening again by making use of 'const'.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Fri, 2 Jan 2009 13:44:20 +0000 (13:44 +0000)]
Convert the oxsemi tornado special cases to use the quirk interface and not
scribble on its own reference structures.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 2 Jan 2009 13:44:12 +0000 (13:44 +0000)]
devpts: fix unused function warning
fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:44:04 +0000 (13:44 +0000)]
tty: Fix close races in USB serial
USB serial has always had races where the tty port usage count can hit zero
during a receive event. The internal locking is a mutex so we can't use
that in the IRQ handlers.
With krefs we can tackle this differently but we still need to be careful.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:40 +0000 (13:43 +0000)]
n_tty: Output bells immediately on a full buffer
This patch causes "bell" (^G) characters (invoked when the input buffer
is full) to be immediately output rather than filling the echo buffer.
This is especially a problem when the tty is stopped and buffers fill, since
the bells do not serve their purpose of immediate notification that the
buffer cannot take further input, and they will flush all at once when the
tty is restarted.
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:32 +0000 (13:43 +0000)]
n_tty: Fix hanfling of buffer full corner cases
Fix the handling of input characters when the tty buffer is full or nearly
full. This includes tests that are done in n_tty_receive_char() and handling
of PARMRK.
Problems with the buffer-full tests done in receive_char() caused characters to
be lost at times when the buffer(s) filled. Also, these full conditions
would often only be detected with echo on, and PARMRK was not accounted for
properly in all cases. One symptom of these problems, in addition to lost
characters, was early termination from unix commands like tr and cat when
^Q was used to break from a stopped tty with full buffers (note that breaking
out was often previously not possible, due to the pty getting in "gridlock",
which will be addressed in another patch). Note space is always reserved
at the end of the buffer for a newline (or EOF/EOL) in canonical mode.
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:25 +0000 (13:43 +0000)]
n_tty: Fix handling of control characters and continuations
Fix process_output_block to detect continuation characters correctly
and to handle control characters even when O_OLCUC is enabled. Make
similar change to do_output_char().
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:43:17 +0000 (13:43 +0000)]
pty: simplify resize
We have special case logic for resizing pty/tty pairs. We also have a per
driver resize method so for the pty case we should use it.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Wessel [Fri, 2 Jan 2009 13:43:04 +0000 (13:43 +0000)]
tty: Fix sparse static warning for tty_driver_lookup_tty
Fixed sparse warning:
drivers/char/tty_io.c:1216:19: warning: symbol 'tty_driver_lookup_tty' was not declared. Should it be static?
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:42:56 +0000 (13:42 +0000)]
sierra: Fix formatting
Andrew Morton wrote:
in drivers/usb/serial/sierra.c:
} else {
if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
tty_buffer_request_room(tty, urb->actual_length);
it's missing a tab.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:42:48 +0000 (13:42 +0000)]
devpts: Coding style clean up
Just nail the oddments now while this code is being touched
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / log