l2tp: Fix locking in l2tp_ip.c

Both l2tp_ip_connect() and l2tp_ip_sendmsg() must take the socket
lock.  They both modify socket state non-atomically, and in particular
l2tp_ip_sendmsg() increments socket private counters without using
atomic operations.
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Use cork flow in tcp_v4_connect()

Since this is invoked from inet_stream_connect() the socket is locked
and therefore this usage is safe.

Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: Use cork flow in dccp_v4_connect()

Since this is invoked from inet_stream_connect() the socket is locked
and therefore this usage is safe.

Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool: remove phys_id from ethtool_ops

After that all the upstream kernel drivers now use phys_id,
and the old ethtool_ops interface (phys_id) can be removed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

hamachi: Put back RX_CHECKSUM

I deleted it by mistake in the TX_CHECKSUM removal
commit.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: add ethtool counters for OS2BMC

OS2BMC registers are available for X540.
This patch adds ethtool counters based on those registers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: add rxhash support

feed RSS hash into skb->rxhash

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: convert to ethtool set_phys_id

Based on patch from Stephen Hemminger.
Convert igb driver to use new set_phys_id ethtool interface.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000: convert to set_phys_id

Based on the original patch from Stephen Hemminger.
Convert to new LED control infrastucture and remove no longer
necessary bits.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e100: implemenet set_phys_id

Based on the original patch from Stephen Hemminger.
Implement set_phys_id to control LED.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ipv4: Initialize cork->opt using NULL not 0.

Noticed by Joe Perches.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Initialize on-stack cork more efficiently.

ip_setup_cork() explicitly initializes every member of
inet_cork except flags, addr, and opt.  So we can simply
set those three members to zero instead of using a
memset() via an empty struct assignment.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>

inet: Decrease overhead of on-stack inet_cork.

When we fast path datagram sends to avoid locking by putting
the inet_cork on the stack we use up lots of space that isn't
necessary.

This is because inet_cork contains a "struct flowi" which isn't
used in these code paths.

Split inet_cork to two parts, "inet_cork" and "inet_cork_full".
Only the latter of which has the "struct flowi" and is what is
stored in inet_sock.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>

hamachi: Delete TX checksumming code commented out since 1999

TX checksumming support has been ifdef commented out of this driver
for more than 10 years, and it makes references to aspects of the IPv4
stack from back then as well.

If someone has one of these rare cards and wants to properly resurrect
TX checksumming support, they can still get at this code in the
version control history.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/tg3.c

Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

net: Add sendmmsg socket system call

This patch adds a multiple message send syscall and is the send
version of the existing recvmmsg syscall. This is heavily
based on the patch by Arnaldo that added recvmmsg.

I wrote a microbenchmark to test the performance gains of using
this new syscall:

http://ozlabs.org/~anton/junkcode/sendmmsg_test.c

The test was run on a ppc64 box with a 10 Gbit network card. The
benchmark can send both UDP and RAW ethernet packets.

64B UDP

batch   pkts/sec
1       804570
2       872800 (+ 8 %)
4       916556 (+14 %)
8       939712 (+17 %)
16      952688 (+18 %)
32      956448 (+19 %)
64      964800 (+20 %)

64B raw socket

batch   pkts/sec
1       1201449
2       1350028 (+12 %)
4       1461416 (+22 %)
8       1513080 (+26 %)
16      1541216 (+28 %)
32      1553440 (+29 %)
64      1557888 (+30 %)

We see a 20% improvement in throughput on UDP send and 30%
on raw socket send.

[ Add sparc syscall entries. -DaveM ]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: fix SJA1000 dlc for RTR packets

RTR frames do have a valid data length code on CAN.
The driver for SJA1000 did not handle that situation properly.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: call dev_alloc_name from register_netdevice

Force dev_alloc_name() to be called from register_netdevice() by
dev_get_valid_name(). That allows to remove multiple explicit
dev_alloc_name() calls.

The possibility to call dev_alloc_name in advance remains.

This also fixes veth creation regresion caused by
84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: function descriptions format fixed

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: update year to 2011 and version to 1.62.12-0

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: improve memory handling, low memory recovery flows

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Do storage mac address validation for SF mode.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: allow WoL on every function in MF modes

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: link report improvements

To avoid link notification duplication

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: removed not used definitions

Reported-by: Karim Hamiti <karim.hamiti@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

usbnet: runtime pm: fix out of memory

This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
fix one out of memory issue, which can be reproduced on omap3/4 based
pandaboard/beagle XM easily with steps below:

- enable runtime pm
echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control

- ifconfig eth0 up

- then out of memroy happened, see [1] for kernel message.

Follows my analysis:
- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
is called to schedule dev->bh, then rx urbs are submited to prepare for
recieving data;

- some usbnet devices will produce garbage rx packets flood if
info->reset is not called in usbnet_open.

- so there is no enough chances for usbnet_bh to handle and release
recieved skb buffers since many rx interrupts consumes cpu, so out of memory
for atomic allocation in rx_submit happened.

This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
is opened.

[1], dmesg
[  234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
[  234.712066] usb 1-1.1: rpm_resume flags 0x0
[  234.712066] usb 1-1: rpm_resume flags 0x0
[  234.712097] usb usb1: rpm_resume flags 0x0
[  234.712127] usb usb1: usb auto-resume
[  234.712158] ehci-omap ehci-omap.0: resume root hub
[  234.754028] hub 1-0:1.0: hub_resume
[  234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
[  234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  234.756042] hub 1-0:1.0: rpm_resume flags 0x4
[  234.756072] usb usb1: rpm_resume flags 0x0
[  234.756164] usb usb1: rpm_resume returns 1
[  234.756195] hub 1-0:1.0: rpm_resume returns 0
[  234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
[  234.756225] hub 1-0:1.0: rpm_suspend returns 0
[  234.756256] usb usb1: rpm_resume returns 0
[  234.757141] usb 1-1: usb auto-resume
[  234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  234.816558] usb 1-1: finish resume
[  234.817871] hub 1-1:1.0: hub_resume
[  234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
[  234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule
[  234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us]
[  234.820587] usb 1-1: rpm_resume returns 0
[  234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[  234.820800] hub 1-1:1.0: rpm_resume flags 0x4
[  234.820831] hub 1-1:1.0: rpm_resume returns 0
[  234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.820861] hub 1-1:1.0: rpm_suspend returns 0
[  234.821777] usb 1-1.1: usb auto-resume
[  234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[  234.868591] hub 1-1:1.0: rpm_resume flags 0x4
[  234.868621] hub 1-1:1.0: rpm_resume returns 0
[  234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.868652] hub 1-1:1.0: rpm_suspend returns 0
[  234.879486] usb 1-1.1: finish resume
[  234.880279] usb 1-1.1: rpm_resume returns 0
[  234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
[  238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
[  238.880218] Backtrace:
[  238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c)
[  238.880249]  r6:00000000 r5:00000000 r4:00000020 r3:00000002
[  238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
[  238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
[  238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154)
[  238.880371]  r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020
[  238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
[  238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190)
[  238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8)
[  238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
[  238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
[  238.880737]  r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20
[  238.880767] r3:bf050b9c
[  238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
[  238.880859]  r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34
[  238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
[  238.880920]  r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac
[  238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
[  238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
[  238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
[  238.881072]  r4:eeeced34 r3:00000001
[  238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
[  238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240)
[  238.881225]  r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8
[  238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64)
[  238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114)
[  238.881286]  r6:0000006d r5:c080c14c r4:c080c100 r3:00020000
[  238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0)
[  238.881317]  r5:00000000 r4:0000006d
[  238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134)
[  238.881378] Exception stack(0xef837e20 to 0xef837e68)
[  238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
[  238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
[  238.881408] 7e60: 20000013 ffffffff
[  238.881408]  r5:fa240100 r4:ffffffff
[  238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8)
[  238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
[  238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8)
[  238.881530]  r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224
[  238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290)
[  238.881561]  r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001
[  238.881591] r3:c01f907c
[  238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
[  238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98)
[  238.881652]  r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc
[  238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374)
[  238.881713]  r6:c01f62f4 r5:c0211320 r4:ef831efc
[  238.881713] Mem-info:
[  238.881744] Normal per-cpu:
[  238.881744] CPU    0: hi:  186, btch:  31 usd:  38
[  238.881744] CPU    1: hi:  186, btch:  31 usd: 169
[  238.881774] HighMem per-cpu:
[  238.881774] CPU    0: hi:   90, btch:  15 usd:  66
[  238.881774] CPU    1: hi:   90, btch:  15 usd:  86
[  238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
[  238.881805]  active_file:926 inactive_file:2538 isolated_file:0
[  238.881805]  unevictable:0 dirty:10 writeback:0 unstable:0
[  238.881805]  free:57782 slab_reclaimable:864 slab_unreclaimable:186898
[  238.881805]  mapped:632 shmem:144 pagetables:50 bounce:0
[  238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881866] lowmem_reserve[]: 0 1904 1904
[  238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881927] lowmem_reserve[]: 0 0 0
[  238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
[  238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
[  238.882080] 3610 total pagecache pages
[  238.882080] 0 pages in swap cache
[  238.882080] Swap cache stats: add 0, delete 0, find 0/0
[  238.882110] Free swap  = 0kB
[  238.882110] Total swap = 0kB
[  238.933776] 262144 pages of RAM
[  238.933776] 58240 free pages
[  238.933776] 10503 reserved pages
[  238.933776] 187773 slab pages
[  238.933807] 2475 pages shared
[  238.933807] 0 pages swap cached

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
drivers/net/wireless/libertas/if_cs.c
drivers/net/wireless/rtlwifi/pci.c
net/bluetooth/l2cap_sock.c

mac80211: Fix a warning due to skipping tailroom reservation for IV

The devices that require IV generation in software need tailroom
reservation  for ICVs used in TKIP or WEP encryptions.
Currently, decision to skip the tailroom reservation in the tx
path was taken only on whether driver wants MMIC to be generated
in software or not. Following patch appends IV generation check for
such decisions and fixes the following warning.

WARNING: at net/mac80211/wep.c:101 ieee80211_wep_add_iv+0x56/0xf3()
Hardware name: 64756D6
Modules linked in: ath9k ath9k_common ath9k_hw
Pid: 0, comm: swapper Tainted: G        W   2.6.39-rc5-wl
 Call Trace:
[<c102fd29>] warn_slowpath_common+0x65/0x7a
[<c1465c4e>] ? ieee80211_wep_add_iv+0x56/0xf3
[<c102fd4d>] warn_slowpath_null+0xf/0x13
[<c1465c4e>] ieee80211_wep_add_iv+0x56/0xf3
[<c1466007>] ieee80211_crypto_wep_encrypt+0x63/0x88
[<c1478bf3>] ieee80211_tx_h_encrypt+0x2f/0x63
[<c1478cba>] invoke_tx_handlers+0x93/0xe1
[<c1478eda>] ieee80211_tx+0x4b/0x6d
[<c147907c>] ieee80211_xmit+0x180/0x188
[<c147779d>] ? ieee80211_skb_resize+0x95/0xd9
[<c1479edf>] ieee80211_subif_start_xmit+0x64f/0x668
[<c13956fc>] dev_hard_start_xmit+0x368/0x48c
[<c13a8bd6>] sch_direct_xmit+0x4d/0x101
[<c1395ae1>] dev_queue_xmit+0x2c1/0x43f
[<c13a74a2>] ? eth_header+0x1e/0x90
[<c13a7400>] ? eth_type_trans+0x91/0xc2
[<c13a7484>] ? eth_rebuild_header+0x53/0x53
[<c139f079>] neigh_resolve_output+0x223/0x27e
[<c13c6b23>] ip_finish_output2+0x1d4/0x1fe
[<c13c6bc6>] ip_finish_output+0x79/0x7d
[<c13c6cbe>] T.1075+0x43/0x48
[<c13c6e6e>] ip_output+0x75/0x7b
[<c13c4970>] dst_output+0xc/0xe
[<c13c62c9>] ip_local_out+0x17/0x1a
[<c13c67bb>] ip_queue_xmit+0x2aa/0x2f8
[<c138b742>] ? sk_setup_caps+0x21/0x92
[<c13d95ea>] ? __tcp_v4_send_check+0x7e/0xb7
[<c13d5d2e>] tcp_transmit_skb+0x6a1/0x6d7
[<c13d533b>] ? tcp_established_options+0x20/0x8b
[<c13d6f28>] tcp_retransmit_skb+0x43a/0x527
[<c13d8d6d>] tcp_retransmit_timer+0x32e/0x45d
[<c13d8f23>] tcp_write_timer+0x87/0x16c
[<c103a030>] run_timer_softirq+0x156/0x1f9
[<c13d8e9c>] ? tcp_retransmit_timer+0x45d/0x45d
[<c1034d65>] __do_softirq+0x97/0x14a
[<c1034cce>] ? irq_enter+0x4d/0x4d

Cc: Yogesh Powar <yogeshp@marvell.com>
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Fabio Rossi <rossi.f@inwind.it>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

can: rename can_try_module_get to can_get_proto

can: rename can_try_module_get to can_get_proto

can_try_module_get does return a struct can_proto.
The name explains what is done in so much detail that a caller
may not notice that a struct can_proto is locked/unlocked.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

can: make struct can_proto const

commit 53914b67993c724cec585863755c9ebc8446e83b had the
same message. That commit did put everything in place but
did not make can_proto const itself.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip_expire() must revalidate route

Commit 4a94445c9a5c (net: Use ip_route_input_noref() in input path)
added a bug in IP defragmentation handling, in case timeout is fired.

When a frame is defragmented, we use last skb dst field when building
final skb. Its dst is valid, since we are in rcu read section.

But if a timeout occurs, we take first queued fragment to build one ICMP
TIME EXCEEDED message. Problem is all queued skb have weak dst pointers,
since we escaped RCU critical section after their queueing. icmp_send()
might dereference a now freed (and possibly reused) part of memory.

Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is
the only possible choice.

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

ipv6: Use flowi4->{daddr,saddr} in ipip6_tunnel_xmit().

Instead of rt->rt_{dst,src}

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Kill rt->rt_{src, dst} usage in IP GRE tunnels.

First, make callers pass on-stack flowi4 to ip_route_output_gre()
so they can get at the fully resolved flow key.

Next, use that in ipgre_tunnel_xmit() to avoid the need to use
rt->rt_{dst,src}.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Pass explicit saddr/daddr args to ipmr_get_route().

This eliminates the need to use rt->rt_{src,dst}.

Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: Cleanup PCIe bus speed info

PCIe connections should be expressed as GT/s (GigaTransfers per second)
instead of the current Gb/s (Gigabits per second).  In addition, it is
incorrect because (due to PCIe gen 1 & 2 having a 20% overhead) the
actually data rate, when expressed in Gb/s, is only 80% of the rate of
GT/s.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: improve EEPROM read/write operations

Introduce buffered read/writes which greatly improves performance on
parts with large EEPROMs.

Previously reading/writing a word requires taking/releasing of synchronization
semaphores which adds 10ms to each operation. The optimization is to
read/write in buffers, but make sure the semaphore is not held for >500ms
according to the datasheet.

Since we can't read the EEPROM page size ixgbe_detect_eeprom_page_size() is
used to discover the EEPROM size when needed and keeps the result in
word_page_size for the rest of the run time.

Use buffered reads for ethtool -e.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix sparse warning

warning: symbol 'before' shadows an earlier one

Convert large macros to functions similar to e1000e.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix typo error with software defined pins on 82599

Correcting a simple typo with enabling software defined pins.  I don't
believe this was causing any issues but this is how it was meant to be
implemented.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Use function pointer for ixgbe_acquire/release_swfw_sync()

Change remaining direct calls to function pointers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igbvf: remove bogus phys_id

This device lies about supporting phys_id. Remove it and just
let the upper layer report not supported.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Add check for invalid size to igb_get_invariants_82575()

Recent commits have changed how EEPROM size is checked and if the size
word is misconfigured, the driver will fail to load.  This patch adds a
check for invalid size word in the EEPROM and uses default size instead
for 82576 parts.

Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgb: convert to set_phys_id

Based on the original patch sent by Stephen Hemminger.

This version incorporates the ethtool changes that Bruce Allan
submitted.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>

ipv4: In ip_build_and_send_pkt() use 'saddr' and 'daddr' args passed in.

Instead of rt->rt_{dst,src}

The only tricky part is source route option handling.

If the source route option is enabled we can't just use plain 'daddr',
we have to use opt->opt.faddr.

Signed-off-by: David S. Miller <davem@davemloft.net>

e100: fix build warning

In function 'e100_hw_init':
warning: 'err' may be used uninitialized in this function

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ipv4: Use flowi4->{daddr,saddr} in ipip_tunnel_xmit().

Instead of rt->rt_{dst,src}

Signed-off-by: David S. Miller <davem@davemloft.net>

x86/net: only select BPF_JIT when NET is enabled

Fix kconfig unmet dependency warning: HAVE_BPF_JIT depends on NET, so
make the "select" of it depend on NET also.

warning: (X86) selects HAVE_BPF_JIT which has unmet direct dependencies (NET)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Use flowi4's {saddr,daddr} in sctp_v4_dst_saddr() and sctp_v4_get_dst()

Instead of rt->rt_{src,dst}

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Use flowi4's {saddr,daddr} in igmpv3_newpack() and igmp_send_report()

Instead of rt->rt_{src,dst}

Signed-off-by: David S. Miller <davem@davemloft.net>

libcxgbi: Use flowi4's saddr in cxgbi_check_route().

Instead of rt->rt_src

Signed-off-by: David S. Miller <davem@davemloft.net>

pptp: Use flowi4's daddr/saddr in pptp_xmit().

Instead of rt->rt_{src,dst}

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Make caller provide on-stack flow key to ip_route_output_ports().

Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: Use flowi4->saddr in dccp_v4_connect()

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Renamt struct rtable's rt_tos to rt_key_tos.

To more accurately reflect that it is purely a routing
cache lookup key and is used in no other context.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Rework ipmr_rt_fib_lookup() flow key initialization.

Use information from the skb as much as possible, currently
this means daddr, saddr, and TOS.

Signed-off-by: David S. Miller <davem@davemloft.net>

net/stmmac: Move "#include <linux/platform_device.h>" to linux/stmmac.h

stmmac.h uses struct platform_device and doesn't include
<linux/platform_device.h>. Whereas drivers/net/stmmac/stmmac.h includes it, but
doesn't directly use it. And so we get following compilation warning while using
this file:
warning: ‘struct platform_device’ declared inside parameter list

This patch includes <linux/platform_device.h> in linux/stmmac.h and removes it
from drivers/net/stmmac/stmmac.h

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysctl: net: call unregister_net_sysctl_table where needed

ctl_table_headers registered with register_net_sysctl_table should
have been unregistered with the equivalent unregister_net_sysctl_table

Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert: veth: remove unneeded ifname code from veth_newlink()

84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 ("veth: remove unneeded
ifname code from veth_newlink()") caused regression on veth
creation. This patch reverts the original one.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smsc95xx: fix reset check

The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Fix failure to enable WoL by default when possible

tg3 is supposed to enable WoL by default on adapters which support
that, but it fails to do so unless the adapter's
/sys/devices/.../power/wakeup file contains 'enabled' during the
initialization of the adapter.  Fix that by making tg3 use
device_set_wakeup_enable() to enable wakeup automatically whenever
WoL should be enabled by default.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

networking: inappropriate ioctl operation should return ENOTTY

ioctl() calls against a socket with an inappropriate ioctl operation
are incorrectly returning EINVAL rather than ENOTTY:

  [ENOTTY]
      Inappropriate I/O control operation.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992
Signed-off-by: Lifeng Sun <lifongsun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dont hold rtnl mutex during netlink dump callbacks

Four years ago, Patrick made a change to hold rtnl mutex during netlink
dump callbacks.

I believe it was a wrong move. This slows down concurrent dumps, making
good old /proc/net/ files faster than rtnetlink in some situations.

This occurred to me because one "ip link show dev ..." was _very_ slow
on a workload adding/removing network devices in background.

All dump callbacks are able to use RCU locking now, so this patch does
roughly a revert of commits :

1c2d670f366 : [RTNETLINK]: Hold rtnl_mutex during netlink dump callbacks
6313c1e0992 : [RTNETLINK]: Remove unnecessary locking in dump callbacks

This let writers fight for rtnl mutex and readers going full speed.

It also takes care of phonet : phonet_route_get() is now called from rcu
read section. I renamed it to phonet_route_get_rcu()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge

amd8111e: trivial typo spelling: Negotitate -> Negotiate

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Make sure flowi4->{saddr,daddr} are always set.

Slow path output route resolution always makes sure that
->{saddr,daddr} are set, and also if we trigger into IPSEC resolution
we initialize them as well, because xfrm_lookup() expects them to be
fully resolved.

But if we hit the fast path and flowi4->flowi4_proto is zero, we won't
do this initialization.

Therefore, move the IPSEC path initialization to the route cache
lookup fast path to make sure these are always set.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

mwifiex: fix missing tsf_val TLV

In mwifiex_cmd_append_tsf_tlv(), two tsf_val TLVs should be
filled in the buffer and then sent to firmware.

The missing first TLV for tsf_val is added back in this patch.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rtlwifi: Fix typo in pci.c

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Add autowake support for USB hardware

The USB drivers don't support automatically waking up when in powersaving mode,
add a work object which will wakeup the device in time to receive the next beacon.
Based on that beacon, we either go back into powersaving mode, or we remain awake
to receive the buffered frames for our station.

Some part of the code, especially rt2x00lib_find_ie and rt2x00lib_rxdone_check_ps
are inspired on the code from carl9170.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Introduce capability flag for Bluetooth co-existence.

Use flag instead of re-reading the eeprom every time.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Streamline rt2800 eeprom initialisations.

In rt2800lib.c the rt2800_init_eeprom function the same eeprom
words were read multiple times, due to inefficient ordering of the
eeprom checks.

Reorder the checks so that each EEPROM word only has to be read once.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Fix optimize register access for rt2800pci

The patch
rt2x00: Optimize register access in rt2800pci
from Helmut Schaa missed one register call, namely
the rt2800_register_multiwrite which should be changed
to rt2x00pci_register_multiwrite.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Optimize TX_STA_FIFO register reading

Add recycling functionality to rt2x00usb_register_read_async.
When the callback function returns true, resubmit the urb to
read the register again.

This optimizes the rt2800usb driver when multiple TX status reports
are pending in the register, because now we don't need to allocate
the rt2x00_async_read_data and urb structure each time.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Reduce tx status reading timeout

When no TX status was available, the default timeout
of 20ms is a bit high. The frame is highly likely already
send out, so the TX status should be available within
only a few milliseconds.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: consolidate MIC failure report handling

Currently, mac80211 handles MIC failures differently
depending on whenever they are detected by the stack's
own software crypto or when are handed down from the
driver.

This patch tries to unify both by moving the special
branch out of mac80211 rx hotpath and into into the
software crypto part. This has the advantage that we
can run a few more sanity checks on the data and verify
if the key type was TKIP. This is very handy because
several devices generate false postive MIC failure
reports. Like carl9170, ath9k and wl12xx:
<http://www.spinics.net/lists/linux-wireless/msg68494.html>
"mac80211: report MIC failure for truncated packets in AP mode"

Cc: Luciano Coelho <coelho@ti.com>
Cc: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ssb: cc: prepare clockmode support for cores rev 10+

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ipv4: don't spam dmesg with "Using LC-trie" messages

fib_trie_table() is called during netns creation and
Chromium uses clone(CLONE_NEWNET) to sandbox renderer process.

Don't print anything.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Only allow recv on connected seqpacket sockets.

This fixes the following oops discovered by Dan Aloni:
> Anyway, the following is the output of the Oops that I got on the
> Ubuntu kernel on which I first detected the problem
> (2.6.37-12-generic). The Oops that followed will be more useful, I
> guess.

>[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> [ 5594.681606] IP: [<ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420
> [ 5594.687576] PGD 2a05d067 PUD 2b951067 PMD 0
> [ 5594.693720] Oops: 0002 [#1] SMP
> [ 5594.699888] last sysfs file:

The bug was that unix domain sockets use a pseduo packet for
connecting and accept uses that psudo packet to get the socket.
In the buggy seqpacket case we were allowing unconnected
sockets to call recvmsg and try to receive the pseudo packet.

That is always wrong and as of commit 7361c36c5 the pseudo
packet had become enough different from a normal packet
that the kernel started oopsing.

Do for seqpacket_recv what was done for seqpacket_send in 2.5
and only allow it on connected seqpacket sockets.

Cc: stable@kernel.org
Tested-by: Dan Aloni <dan@aloni.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

batman-adv: Make bat_priv->primary_if an rcu protected pointer

The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the bat_priv->primary_if need to be used, as well as spin/rcu locking.

Otherwise we might end up using a primary_if pointer pointing to already
freed memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: fix gw_node_update() and gw_election()

This is a regression from c4aac1ab9b973798163b34939b522f01e4d28ac9

- gw_node_update() doesn't add a new gw_node in case of empty curr_gw.
This means that at the beginning no gw_node is added, leading to an
empty gateway list.

- gw_election() is terminating in case of curr_gw == NULL. It has to
terminate in case of curr_gw != NULL

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: Move definition of atomic_dec_not_zero() into main.h

atomic_dec_not_zero() is very useful and it is currently defined
multiple times. So it is possible to move it in main.h

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

batman-adv: orig_hash_find() manages rcu_lock/unlock internally

orig_hash_find() manages rcu_lock/unlock internally and doesn't need to
be surrounded by rcu_read_lock() / rcu_read_unlock() anymore

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

iwlagn: remove un-necessary debugfs callback

After driver split, no need for debugfs callback, remove those

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: prefer BSS context

If an interface type changes from a type that is
only supported on the PAN context (e.g. P2P GO)
to a type that is supported on the BSS context,
and the BSS context is not in use, then we need
to use the BSS context instead of changing the
device type within the context. To achieve this,
refuse the type change, which causes a down/up
cycle that will allocate the BSS context for the
interface.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: improve RXON checking

The current RXON checking doesn't verify that
the channel is valid (or at least non-zero),
so add that. Also, add a WARN() so we get a
stacktrace, and capture a bitmask of errors
in order to capture all necessary information
in the warning itself (in case the previous
messages are snipped off.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: remove spectrum measurement header

This header file isn't used, and if we ever need
these definitions they shouldn't be added to a
driver but rather to the common 802.11 include
file that has all frame definitions. Thus, just
remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: semaphore and calib cleanup

All agn devices use the same eeprom semaphore and calib version routines.
Delete the indirection and move the semaphore routines to where they are
used and make static.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: mod param cleanup

All agn devices use the same module parameter structure.  Delete the
indirection and access the structure diretly.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: new 105 series device

Correction for new 105 series devices

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: use proper good CRC threshold behaviour

New microcode versions use the good CRC threshold
field differently, as a flag, and in that case we
should set it to 1/0 instead of 1/65535 for an
active/passive scan.

The new behaviour is advertised by the uCode with
a feature flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: connect and disconnect sequence for RXON

No functional changes, separate the connect and disconnect sequences in
RXON commit function, easier to read and understand.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: remove 5000 from rxon_assoc structure

The data structure is shared by all _agn devices, remove the reference to 5000

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: make rxon_assoc static function

Move rxon_assoc to static function from ops

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: refactor restart

The WoWLAN resume code will have to essentially
do a restart, but without going through the work
struct. To support that, refactor the restart by
splitting out the preparation code into a new
function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: introduce silent grabbing of NIC access

There are a few cases like the WoWLAN support
I'm writing that require attempting to access
the NIC when it is known that it might not be
accessible, e.g. after the system woke up and
the platform might have reset the device.

To avoid messages in this case, introduce the
new function iwl_grab_nic_access_silent(), it
will only return an error status.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

iwlagn: avoid hangs when restarting device

If a device error happens while the uCode is
being loaded or initialised, we will attempt
to restart the device (which will likely fail
again, but that's not the issue here). During
this new restart, we turn off the device, but
as the uCode failed to initialise it already
is turned off. As a consequence, grabbing NIC
access will fail and cause excessive messages
and hangs.

To fix this issue, introduce a new status bit
and only attempt to reprogram the device when
it isn't already disabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration

This makes sure that one cannot request a 99Mbps full-duplex and get a
100Mbps half-duplex configuration in return due to the way the
speed/duplex parameters are handled internally.

Tested: e1000 works
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tulip/de2104x: don't report different speeds depending on port type

Initial driver reported different speeds depending on the port being
used. This advertises the speed to be 10Mbps in any case, which is
what it actually is on the wire.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>