staging:netlogic:Fixes commenting style in xlr_net.c

Fixes commenting style in xlr_net.c mentioned in
drivers:staging:netlogic:TODO file

Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/olpc_dcon: fix kconfig to fix build errors

Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y
by preventing that kconfig combination.

These build errors are caused by having a kconfig bool symbol
(FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535),
but when the tristate symbol is =m, the bool symbol is =y.

  drivers/built-in.o: In function `dcon_read_status_xo_1':
  olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set'
  drivers/built-in.o: In function `dcon_wiggle_xo_1':
  olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set'
  olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear'
  drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow
  drivers/built-in.o: In function `dcon_wiggle_xo_1':
  olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set'
  drivers/built-in.o: In function `dcon_init_xo_1':
  olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear'
  olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset'
  olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event'
  olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq'
  olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'

However, adding GPIO_CS5535 to the Kconfig dependencies also creates
a kconfig recursive dependency error on powerpc:
  drivers/i2c/Kconfig:5:error: recursive dependency detected!
  drivers/i2c/Kconfig:5: symbol I2C is selected by FB_OLPC_DCON
  drivers/staging/olpc_dcon/Kconfig:1: symbol FB_OLPC_DCON depends on GPIO_CS5535
  drivers/gpio/Kconfig:577: symbol GPIO_CS5535 depends on GPIOLIB
  drivers/gpio/Kconfig:38: symbol GPIOLIB is selected by ARCH_REQUIRE_GPIOLIB
  drivers/gpio/Kconfig:23: symbol ARCH_REQUIRE_GPIOLIB is selected by MCU_MPC8349EMITX
  arch/powerpc/platforms/Kconfig:351: symbol MCU_MPC8349EMITX depends on I2C

This is due to FB_OLPC_DCON selecting I2C instead of depending on it,
so change the select to a dependency.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging/olpc: fix dependencies to fix build errors"

This reverts commit 6170155d4affa14eb13cb789623d54baba2bf241.

It isn't correct.

Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mt29f_spinand: fix build error when ONDIEECC not enabled

Fix build error when CONFIG_MTD_SPINAND_ONDIEECC is not enabled
by moving an inline function outside of that #ifdef block.

drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_read_byte':
drivers/staging/mt29f_spinand/mt29f_spinand.c:665:9: error: implicit declaration of function 'mtd_to_state' [-Werror=implicit-function-declaration]
drivers/staging/mt29f_spinand/mt29f_spinand.c:665:32: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_write_buf':
drivers/staging/mt29f_spinand/mt29f_spinand.c:700:32: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/staging/mt29f_spinand/mt29f_spinand.c: In function 'spinand_read_buf':
drivers/staging/mt29f_spinand/mt29f_spinand.c:707:32: warning: initialization makes pointer from integer without a cast [enabled by default]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Kamlakant Patel <kamlakant.patel@broadcom.com>
Cc: Mona Anonuevo <manonuevo@micron.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: return if pControlURB->hcpriv not NULL

Fixes occasional urb submitted while active.

Even thought the fMP_CONTROL_WRITES/fMP_CONTROL_READS flags
are cleared in the return context urb->hcpriv is not NULL.

check for hcpriv and return STATUS_FAILURE if not NULL.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove 10 second timer and move to BSSvSecondCallBack

Remove sTimerTxData 10 second timer which triggers PSbSendNullPacket
every 40 seconds when bLinkPass == true.

Move the 40 second timer to the existing BSSvSecondCallBack
one second delayed workqueue and trigger every 40 seconds when
bLinkPass == true.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: return from workqueues on fMP_DISCONNECTED

Return from work queues on flag fMP_DISCONNECTED to prevent
any scheduling threads past closing of device.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: main_usb.c correct pDevice->pControlURB goto

Correct goto of patch
staging: vt6656: make pControlURB available life time of driver.

Which should free_netdev.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging:media:lirc: quoted string split across lines"

This reverts commit 7db78438d932d12afda5f367cfcb56337457e037.

It broke the build, and isn't ok.

Cc: Archana kumari <archanakumari959@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: adding spaces around '='

Fix checkpatch error: ERROR: spaces required around that '=' (ctx:WxV)

Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove formal get_request_value function header from ft1000-download.c

since there was no information in the C99 style header
for function get_request_type() that was not easily obtainable
by looking at the function, the header was completely removed.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove formal get_request_type function header from ft1000-download.c

since there was no information in the C99 style header
for function get_request_type() that was not easily obtainable
by looking at the function, the header was completely removed.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: convert formal put_handshake() header to single line comment

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: change ft1000-download.c header to /* */ comment style

Coding style requires that comments use the standard /* */ style
instead of C99 style.
Also removed author comment from a previous contributor

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Replacing (u8*) with (u8 *)

Fix checkpatch error: ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: btmtk_usb: Fix Sparse Warning of incorrect casting

This patch fixes the following Sparse Warnings in btmtk_usb.c:

drivers/staging/btmtk_usb/btmtk_usb.c:110:16: warning: cast to restricted __le32
drivers/staging/btmtk_usb/btmtk_usb.c:299:23: warning: cast to restricted __le16

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ktap: remove unused <asm/syscall.h> header file

Fengguang Wu reported that ktap compile failed in mips,
the reason is it cannot found <asm/syscall.h> in mips arch.

Due to the code serviced by <asm/syscall.h> already removed,
so just simply remove the according header file to avoid
compiler failure.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ktap: update email name in MAINTAINERS

Use "Jovi Zhangwei" from now on.

Signed-off-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Use parenthesis around sizeof

Convert sizeof foo to sizeof(foo) to be more kernel style compatible.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Convert driver to use external firmware

As originally submitted, this driver acquired its firmware from data
statements embedded in the source code. This information has been extracted
into a binary file that has been accepted into the linux-firmware git
repo as commit ffc47f1 entitled "rtlwifi: Add new firmware files for
rtl8188eu". This patch switches the driver to use this file, and deletes
the firmware data from the source. The TODO list is also updated.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Removed space at start of line

Removed unnecessary space at start of line
to fix checkpatch.pl warning.

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fixed line over 80 chars warning

Fixed the line over 80 characters warning
to comply with linux cidung style

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: remove space between function name and '('

Fix checkpatch warning: WARNING: space prohibited between function name
and open parenthesis '('

Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: moving { to the previous line

Fix checkpatch error: ERROR: that open brace { should be on the previous
line

Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: convert formal get_handshake() function header to single line comment

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: convert formal function header to single line comment

As per coding style,C99 comments are not allowed
also, the formal header contained empty space and
redundant information that's right there in the function

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove space before closing paren

as per coding style,
space prohibited before that close parenthesis

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove space before address operator

as per coding style (checkpatch error),
space prohibited after that '&'

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove braces from one-line conditional

As per coding style,
braces {} are not necessary for single statement blocks

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: change comment style

Coding style requires that comments use the standard /* */ style
instead of C99 style.

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: remove unnecessary space before semicolon

Removed unnecessary space before semicolon which was
leading to checkpatch.pl warning.

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: remove space before semicolon

Fix checkpatch warning: WARNING:space prohibited before semicolon

Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000-usb: remove space between function name and open paren in ft1000_download.c

fixed checkpatch.pl warning: space prohibited between function name and
open parenthesis '('

Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Removed C99 style comments

C99 style comment // should not be used as
per coding guidelines.Usage of C99 style
comment // was resulting in checkpatch.pl
error.Hence replaced it with block comment /* */

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Removed redundant code from iwctl file

There was one line which was added twice in the
definition of iwctl_handler and hence was redundant.
It was defined at line nos 1798 and 1818. Removed
the code at line 1818.
The redundant code was:
IW_HANDLER(SIOCSIWMLME, iwctl_siwmlme)
which was defined twice.

Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Remove unnecessary semicolons

These aren't necessary after switch, if and while statements.

Also remove some unnecessary braces where these
semicolons were removed around single statement
and some unnecessary blank lines.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: crystalhd: use vfree() instead of kfree()

Use vfree() instead of kfree() to free vmalloc()
allocated data.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use list.h for transactions

Use list.h helpers for transactions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use list.h for pipes

Use list.h helpers for pipes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use list_for_each_entry_safe()

Use list_for_each_entry_safe() when deleting all list items.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use list_del_init()

Replace list_del() + INIT_LIST_HEAD() with list_del_init().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use dynamic allocation for pipes

Use dynamic memory allocation for pipes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use dynamic allocation for transactions

Use dynamic memory allocation for transactions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use a single .h file

Merge USBC and USBN register definitions into a single header
file. Although all HW definitions are purely internal to the driver,
it's better to keep them separate due to the large size of the file.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: CN3xxx: program p_xenbn and p_rclk through p_rtype

Do the clock setup through p_rtype on all OCTEONs. This enables to get
rid of duplicated register definitions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: delete cvmx_usbnx_clk_ctl_cn50xx

Add the missing bits to common clk ctl definition, and we can delete
duplicated definitions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: delete unused cvmx_usbnx_usbp_ctl_status definitions

cvmx_usbnx_usbp_ctl_status was multiplied for different OCTEONS and all
those definitions are unused. Delete them.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: copy dot11d.h in ieee80211/dot11d.h and remove it

This patch copies the content of dot11d.h into ieee80211/dot11d.h and then
removes it because practically the two header files are the same with the
difference that in dot11d.h some checkpatch warnings have been corrected.
This is done because the duplication of dot11d.h is unnecessary since the
structures and functions that defines are used directly only inside ieee80211/.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove ieee80211_crypt.h

This patch removes ieee80211_crypt.h because this header file is the same as
ieee80211/ieee80211_crypt.h and the structures and functions declared in it
are used directly only inside ieee80211/.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove r8180_pm.c and r8180_pm.h

This patch removes r8180_pm.h and r8180_pm.c from rtl8192u because they
are not used anywhere in the driver.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix line size in r819xU_HTType.h

This patch fixes the following checkpatch warning in r819xU_HTType.h:
WARNING: line over 80 characters

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add parenthesis around complex macros in r819xU_HTType.h

This patch fixes the following checkpatch error:
ERROR: Macros with complex values should be enclosed in parenthesis

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add space after ',' in r819xU_HTType.h

This patch fixes the following checkpatch error:
ERROR: space required after that ','

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix alignment in r819xU_HTType.h

This patch fixes some alignment issues in r819xU_HTType.h to impreove code
readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix comments in r819xU_HTType.h

This patch fixes comments in r819xU_HTType.h by:
* replacing // commments with /* */ comments
* removing author and date information from comments
* removing unnecessary comments

This is done to improve code readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix space around braces in r819xU_HTType.h

This patch fixes the white space around braces in r819xU_HTType.h according
to the linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: use __packed instead of __attribute__((packed))

This patch fixes the following checkpatch warning:
WARNING: __packed is preferred over __attribute__((packed))

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix open brace position in r819xU_cmdpkt.h

This patch fixes the following checkpatch warning and error:
WARNING: missing space after enum definition
ERROR: open brace '{' following enum go on the same line

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix alignment in r819xU_cmdpkt.h

This patch fixes alignment issues in r819xU_cmdpkt.h to improve code
readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix space after ( in r819xU_cmdpkt.h

This patch removes prohibited space after ( in r819xU_cmdpkt.h according to
the linux kernel coding style convention.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix space at the start of lines in r819xU_cmdpkt.h

This patch fixes the following checkpatch warning:
WARNING: please, no spaces at the start of a line

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix comments in r819xU_cmdpkt.h

This patch fixes the comments in r819xU_cmdpkt.h by:
* removing any empty or unnecessary comments
* replacing the // comments with /* */ comments
* removing date and author information from comments

This is done to improve code readability and to conform to linux kernel
coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix line size in r819xU_cmdpkt.h

This patch reduces the line length below 80 chars to improve code readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add space after } and , in r819xU_cmdpkt.h

This patch fixes white space after } and , so that the code becomes more
readable and conforms to the linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove #ifdef JOHN_

This patch removes the guards #ifdef JOHN_HWSEC, #ifdef JOHN_DUMP_TXDESC and
because the code inside them calls some undefined functions (e.g read_rtl8225,
rtl8187_read_phy etc).

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Use NULL instead of 0

Use NULL instead of 0 for pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Use NULL instead of 0

Use NULL instead of 0 for pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lirc: Do not use 0 for NULL pointer

Do not use 0 for NULL pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jarod Wilson <jarod@wilsonet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_tty: Do not use 0 for NULL pointer

Do not use 0 for NULL pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Do not use 0 for NULL pointer in console.c

Do not use 0 for NULL pointer.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: midi: Use NULL instead of 0 for pointers

Use NULL instead of 0 for pointers.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: dgap_tty: Do not use 0 for pointers

0 should not be used instead of NULL for pointers.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: dgap_fep5: Do not use 0 for NULL pointer

Do not compare NULL pointer with 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: dgap_fep5: Remove braces around return

Braces are not needed around return values.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: dgap_fep5: Remove braces around single line statements

Single line statements do not require braces.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: prefix macros in s626.h

Prefix the names of all the macros defined in "s626.h" with `S626_`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: prefix macros in s626.c

Prefix the macros defined in "s626.c" with `S626_`.  Macro `VECT0` is
unused, so remove it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: prefix function and variable names

Add the prefix `s626_` to all the static variables and functions that
don't already have it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename struct buffer_dma

Re-tag `struct buffer_dma` to `struct s626_buffer_dma` to avoid
potential namespace clashes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: move struct buffer_dma

Move the declaration of `struct buffer_dma` from "s626.h" to "s626.c" as
it seems more at home there.  After this move, "s626.h" just contains
macros related to hardware registers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: make trimchan[] and trimadrs[] const

Declare the static variables `trimchan[]` and `trimadrs[]` as constant
data.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: add mmiowb() calls

`s626_mc_enable()` is often called to enable some function in a control
register after setting up some other registers.  Precede the write to
the control register with a call to `mmiowb()` to preserve mmio write
ordering.

`s626_mc_disable()` is called to disable some function in a control
register and is often followed up by writes to other registers.  Follow
the write to the control register with a call to `mmiowb()` to preserve
mmio write ordering.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove TRUE and FALSE macros

"s626.h" defines the macros `TRUE` and `FALSE` if they are not already
defined, yielding the expected numeric values.  Remove the macros and
replace their usage with the values `true` and `false`, respectively.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: move s626_enc_chan_info[]

Move `s626_enc_chan_info[]` and remove its forward declaration.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: move encoder functions part 3

Move the final lot of encoder functions to help avoid the forward
declaration of `s626_enc_chan_info[]`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: move encoder functions part 2

Move some more functions to help avoid the forward declaration of
`s626_enc_chan_info[]`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: move encoder functions part 1

Move some functions to help avoid the forward declaration of
`s626_enc_chan_info[]`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove encpriv macro

The `encpriv` macro relies on a local variable `dev` (of type `struct
comedi_device *`) being set correctly.  By a convoluted path involving
the `private` data pointer of subdevice 5 (the encoder (counter)
subdevice), the macro always yields a pointer to the first element of
the static array `enc_private_data[]`.  That holds statically constant
data for each of 6 encoder channels.

Instead of using the `encpriv` macro, just access the array it points to
directly and get rid of the macro.  Don't bother initializing the
`private` member of the encoder subdevice any more.  Since
`enc_private_data[]` now has nothing to so with subdevice private data,
rename `enc_private_data[]` to `s626_enc_chan_info[]` and rename its
type from `struct enc_private` to `struct s626_enc_info`.  Since the
array contains unchanging, static information, declare it `const` and
declare all the variables that point to it `const`.

A forward declaration of `s626_enc_chan_info[]` has been added
temporarily and will be removed by a later patch.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename CamelCase variables

Rename the remaining CamelCase parameters and variables.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename CamelCase functions

Rename the remaining non-lower-case functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove a variable from set_mode_a() and _b()

The `set_mode_a()` and `set_mode_b()` functions use a local variable
`setup` which is initialized to the value of parameter `Setup` which is
not used further.  Get rid of the local variable and rename the
parameter to `setup`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename CamelCase in struct enc_private

Rename the CamelCase members of `struct enc_private`.  Since most of
those are function pointers pointing to functions with similar names as
the members, rename the functions they point to as well.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename CamelCase in struct s626_private

Rename the CamelCase members of `struct s626_private`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: replace CamelCase struct bufferDMA

Rename `struct bufferDMA` and its members to avoid CamelCase.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove duplicate macros I2C_B0, I2C_B1, I2C_B2

The `I2C_B0(ATTR, VAL)`, `I2C_B1(ATTR, VAL)` and `I2C_B2(ATTR, VAL)`
macros are defined identically in "s626.h" and "s626.c".  Remove the
duplicates from "s626.c".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove I2CR and I2CW macros

The `I2CR` and `I2CW` macros expand to the I2C read and write addresses,
respectively.  They are only used in one place each and include the name
of a local variable `devpriv` in their expansion.

Get rid of the macros and expand them in place.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: rename ai_continous

Rename the `ai_continous` member of `struct s626_private` to
`ai_continuous`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove PCI ID defines

The Sensoray 626 is based on the Philips SAA7146 chip using the Philips
vendor and device ID for the chip, but with custom subdevice and
subvendor IDs.  Use the Philips IDs in the PCI device table and replace
the macros for the subvendor and subdevice IDs with open-coded values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove unused DMAHandle

The `DMAHandle` member of `struct bufferDMA` in "s626.h" is unused, so
remove it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: convert a printk()

Convert a printk() to a dev_err().

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>