fbcon: bgcolor fix

The fourth bit of the background color is the blink property bit, not the
intensity bit, as for the foreground color.  Therefore it shouldn't be
included in the background color.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver

Framebuffer driver for the SH7760/SH7763 integrated LCD controller.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: drop the xtimings structure

Remove the xtimings structure which only stored some values to be used
later (mostly once).  Calculate and use these values in places they are
needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: drop redundant code

Drop structure which is only set but never read.  Drop variables which are
only set and never read.  Convert one long switch into two shorter ones.

Add cpu_relax() in busy waiting loop.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: simplify clock calculation

There is nothing to gain by converting value in kHz to fixed point MHz.
Just calculate everything in kHz.

A reorder of the loop allows reducing number of iterations (check if
frequency is not too high already).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/amifb.c cleanups

This patch contains the following cleanups:
- make the needlessly global amifb_init() static
- rename cleanup_module() to amifb_exit(),
  make it static __exit,
  use module_exit(),
  there's no need to #ifdef MODULE it

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lxfb: fix console blanking

Simply enabling DAC blanking without turning off the CRT seems to be resulting
in characters remaining on the screen when the monitor blanks.  This patch
turns off the CRT for all modes, and also powers down the DACs when vsync
and/or hsync are disabled.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lxfb: drop dead declarations from header

We never sent the gamma stuff upstream, and don't really care about it.
However, lx_[gs]_et_gamma prototypes snuck into lxfb.h anyways; there are
no definitions for them.  Drop the dead code.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char: remove old broken Cobalt LCD driver

Remove old broken Cobalt LCD driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add new Cobalt LCD framebuffer driver

Add new Cobalt LCD framebuffer driver.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fsl-diu-fb: update Freescale DIU driver to use page_alloc_exact()

Update the Freescale DIU driver to use page_alloc_exact() to allocate a
DMA buffer.  This also eliminates the rheap-based memory allocator.  We
can do this now because commit 6ccf61f9 allows us to allocate 8MB
physically- contiguous memory blocks.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lcd: add platform_lcd driver

Add a platform_lcd driver to allow boards with simple lcd power controls
to register themselves easily.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lcd: add lcd_device to check_fb() entry in lcd_ops

Add the lcd_device being checked to the check_fb entry of lcd_ops.  This
ensures that any driver using this to check against it's own state can do
so, and also makes all the calls in lcd_ops more orthogonal in their
arguments.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fb: add support for the ILI9320 video display controller

Provide support for the ILI9320 display controller chip which is found in
many LCD displays.  Included with this is support for an example LCD using
this chip, the VGG2432A4.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sm501: fixup allocation code to be 64bit resource compliant

As pointed out by Andrew Morton, we have a problem when setting the 64bit
resources option.  Alter the allocation routines to remove the need to use
the start and end fields, use the proper HEAD_PANEL/HEAD_CRT and update
the comments.

Note, we also fix the bug where we failed to check the size of the
CRT memory allocation.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sm501: restructure init to allow only 1 fb on an SM501

Add the ability to register only one of the two possible main framebuffer
devices on the SM501 by passing platform data for only the framebuffer
that you are interested in having.

As a side note, we update the init sequence to commonise the code that is
executed twice, and fix a pair of missing frees that we didn't do on
framebuffer exit, such as freeing the fb's cmap.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sm501: add inversion controls for VBIASEN and FPEN

Add flags to allow the driver to invert the sense of both VBIASEN and FPEN
signals comming from the SM501.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: avoid division by zero

Avoid division by zero in  atmel_lcdfb_check_var() function.

If pixclock is not specified while passing a var structure in
the check_var() funtion, a division by zero occurs (when
translating pixclock to KHz).

This patch adds a checking of this value and try to choose a
video mode in the modelist.

The mode found in the probe function in added to the modelist.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: update to correct platform driver usage

It updates skeletonfb to new platform driver API.  The skeletonfb is
templates for creating new drivers.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aty: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: fix a cast

The argument to iounmap() is void __iomem *. Fix the cast.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: report probe errors

Properly propagate errors to the probe function.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: use a PCI device ID table

Convert atyfb to use a PCI device ID table.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: correct_chipset() can fail

Atari probe code relies on correct_chipset() failing if the device is not
a mach64 GX/CX.  aty_chips[] array would be indexed with -1 in that case.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atyfb: remove dead code

Remove dead code.  This will slightly change the behaviour of the driver
on systems that support backlight control.  Previously they would just
turn the backlight off using the backlight control but now the generic LCD
code will also turn off the LCD using the POWER_MANAGEMENT register.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: xoffset, yoffset and yres are unsigned

The xoffset, yoffset and yres members of fb_var_screeninfo are __u32.
Make them unsigned in the code as well.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: width and height are unsigned

The width and height members of fb_var_screeninfo are __u32.  The code
initializes them to -1 which seems wrong, and 0 seems like an equally good
default value.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hgafb: convert to new platform driver API

Convert the hgafb driver to use new platform driver API.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9689

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfb: only enable if explicitly requested when compiled in

The Kconfig help for the vfb driver says:
   Do NOT enable it for normal systems! To protect the innocent, it
   has to be enabled explicitly at boot time using the kernel option
   `video=vfb:'.

This change lets the code match the description.

Support for vfb:disable is kept for backwards compatibility; vfb:off works
because it is tested at a higher level.

Note: any undefined option (e.g. vfb:enable) will also enable this driver.

The relevant code has been unchanged since before the migration to
git (2.6.12).

This patch fixes bugzilla #9310 and was the root cause behind
http://lkml.org/lkml/2008/5/31/220.

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: SuperH Mobile LCDC Driver

This is the SuperH Mobile LCDC frame buffer driver V2, adding support for
the LCDC block found in SuperH Mobile processors.  The hardware supports
up to two LCD panels per LCDC block, and both RGB and SYS interfaces can
be used to hook up LCD panels/modules.

The device driver is a regular platform driver, so LCD configuration and
board specific hooks are passed to the driver using platform data.  LCD
modules using SYS interface often require special configuration using the
SYS bus, and to solve this cleanly the driver provides SYS interface
operations to the board code.

Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA
panels using RGB16 and RGB18 interfaces.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: remove ypan checks done by a higher layer

These checks and assignments are done by a higher layer so remove them
from the driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: source code improvement

Use constants and functions from the vga.h file.  Also add module
description.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: add mode_option module parameter

Small step toward unification of mode setting parameter.  This is required
to fix the Bugzilla's bug 9847

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: documentation update

Make the tridentfb documentation closer to current state of the tridentfb
driver.  Fix also some formatting.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uvesafb: change mode parameter to mode_option

Make more drivers use the "mode_option" parameter.  This one is quite new
so drop the old "mode" parameter before someone starts using it seriously.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: make logo_height a local variable

Make logo_height variable local in the only function it is used.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: FIFO underflow management

Manage atmel_lcdfb FIFO underflow

Resetting the LCD and DMA allows to fix screen shifting after a FIFO
underflow.  It follows reset sequence from errata "LCD Screen Shifting
After a Reset".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atafb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amifb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aty128fb: test below 0 on unsigned pll->post_divider

pll->post_divider is unsigned, so the test fails

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/aty/radeon_base.c: notify user if sysfs_create_bin_file() failed

Current kernel builds warn about:
drivers/video/aty/radeon_base.c: In function 'radeonfb_pci_register':
drivers/video/aty/radeon_base.c:2334: warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result
drivers/video/aty/radeon_base.c:2336: warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result

Do minimal checking of these functions and issue a warning if either
fails.  They don't seem to be critical..

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sa1100fb: convert ctrlr_sem in a mutex

The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pxafb: convert ctrlr_sem in a mutex

The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video/sis/: remove compat code

This patch removes compat code for older kernel versions.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mdacon messing up default vc's - set default to vc13-16 again

mdacon incorrectly detects MDA hardware on systems without such graphics card.

One may load this module by chance, for example when doing some systematical
module-testing, and if there is no Monochrome Display Adapter attached ,
module init renders vc1-16 completely unusable.

I and others have run into this more than once.  see [Bug 224522 - modprobe
mdacon freezes machine -> https://bugzilla.novell.com/show_bug.cgi?id=224522 ]
for example

Apparently  proper MDA detection seems to be broken for a long time - seems to
be related to those #ifdef TEST_MDA_B statements added by Edward Betts.

this commit back in 2002 made things even worse :
http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=c72757b49c88914433244757fb4967fc63546685

It changed default vc allocation from 13-16 to 1-16 for no apparent reason
(!?) , and with that (and without X), mdacon grabs the vc you`re currently
sitting on and locks you out.

this is from Kconfig :
>config MDA_CONSOLE
>        depends on !M68K && !PARISC && ISA
>        tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
>        ---help---
>          Say Y here if you have an old MDA or monochrome Hercules graphics
>          adapter in your system acting as a second head ( = video card). You
>          will then be able to use two monitors with your Linux system. Do not
>          say Y here if your MDA card is the primary card in your system; the
>          normal VGA driver will handle it.

As we can see mdacon is just meant as an additional driver for dual-head
setup, and since kernel 2.4.36 still defaults to vc13-16 , setting the default
back to that value again shouldn`t do any harm.

Hereby i'm reverting that change, setting default back to to vc13-16 again.

Besides the fact that mdacon may be rarely or never be used these days and
could perhaps put to trash anyway (pre-dinosaur hardware!), indeed this is not
a real solution, but at least it removes the unfortunate side-effect of
messing up the vc you`re working on.

Signed-off-by: Roland Kletzing <devzero@web.de>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Cc: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: remove warning message that cyblafb driver should be used

The tridentfb driver should handle now all chipsets handled by the cyblafb
driver.  Remove the message which claims that support will be removed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: add imageblit acceleration for Blade3D family

Add imageblit acceleration for the Blade3D family of cores.  The code is
based on code from the cyblafb driver.

It is a step toward assimilating back the cyblafb driver into the
tridentfb driver.  The cyblafb driver handles a subfamily of the Trident
Blade3d cores.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: Blade3D clock fixes

This patch fixes following problems:
- does not allow the m parameter to reach 0 as
  it locks the graphics core (power cycle needed)
- for the newer chips (with new clock registers)
  does not allow of n / m ratio below 4 as it gives
  unstable image on the Blade3D core
- extend shift parameter (k) range  to 2 for the newer
  chips to cope with the n /m >= 4 limit at low resolution
  (bandwidth) modes
- prefer modes with higher n / m ratio (higher k values)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: y-panning fixes

The Trident cards uses only 20-bit address of screen start in double
words.  This allows addressing for only 4MB of video memory so check this.

Also remove some redundant checks and assignments.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix 224 color logo at 8 bpp

Fix depth setting for 8 bpp mode.  The nice 224 color logo is not
displayed in 8 bpp depth without this fix.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix console freeze when switching from X11

This patch fixes two problems when acceleration is enabled:

 - console switch from the Xorg locks up the computer
   because the Xorg code locks some registers and disables
   the mmio mode, so reenable these in the
   tridentfb_set_par() and enable_mmio()

 - blacklist the Image975 chipset from setting PCI burst
   mode. This helps with random lock ups of the
   framebuffer on this chip. The same fix is probably
   needed for the Xorg as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: source code improvements

This patch contains general source code improvments:
 - more simple functions are inline
 - removes some meaningless output and the VERSION
   string as it is no use
 - eng_par is moved into the tridentfb_par
 - removed small section of code for CyberBladeXPAi1
   which is maybe right for only one resolution
   and refresh rate and is probably redundant now
 - other minor improvements

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: acceleration constants change

This patch replaces deprecated constant FB_ACCELF_TEXT with
FBINFO_HWACCEL_DISABLED and adds constants for Trident families of
accelerators.

The FBINFO_HWACCEL_DISABLED is correctly used so noaccel parameter works
now.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: various pixclock and timing improvements

This patch fixes few issues related to timings and pixclock generation:

 - disallow the pixclocks with numerator lower than
   double denominator. This fixes display instability
   for some modes.
 - choose the pixelclock with the highest
   numerator and denominator values. This improve
   image quality and fixes display instability
   for some modes.
 - make interlaced modes work.
 - set synchronization pulses polarization
   correctly.
 - horizontal synchronization timing are now
   the same as generated by X.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: acceleration bug fixes

This patch fixes two problems when acceleration is enabled:

 - bit for bitblt direction is corrected
   so scrolling down works as expected on 3DImage chips

 - initialization of acceleration is done later
   this helps with initial console malfuntion (on Blade3D
   chips) well documented here:
   http://marc.info/?l=linux-fbdev-users&m=111386953124478&w=2

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: acceleration code improvements

This patch brings various acceleration improvements:
- set  copyarea/fillrect for non-accelerated framebuffer (fix)
- remove 15 bpp depth handling to simplify code as it hardly
  works (15 bpp handling was obviously missing in some switches)
- add fb_sync call and move waiting before accelerated function
  to make acceleration more asynchronous to cpu (few % of speed
  improvement)
- add cpu_relax() call in waiting loops
- make longer register names and name more registers
- move registers' definition to header
- general code improvements (shortening, simplifying)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: add acceleration for TGUI families

This patch adds acceleration for TGUI 9440 and 96xx chips.  These chips
requires line length to be power of 2, so this is also changed.

It also moves the troubling enable_mmio() function to its final
destination.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix hi-color modes for TGUI 9440

The TGUI 9440 requires doubling clock for 16bpp (hi-color) modes.

The patch also moves back enable_mmio() call to the right position.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: preserve memory type settings

Do not overwrite bits which contain memory type settings.  It removes
noise pixels ("snow") on Blade3D and 3DImage chips.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: improve check_var function

Do some additional checks (like pixelclock versus ramdac speed) to
eliminate modes which do not work.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix unitialized pseudo_palette

Initialize the pseudo_palette pointer properly.  This fixes crash when
16bpp or 32bpp mode is selected.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: add TGUI 9440 support

Add support for TGUI 9440 chip.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: improved register values on TGUI 9680

Improved values for some registers after Xorg Trident driver.  The main
problem was that values set by BIOS have been ignored.

This patch completely remove random pixels ("snow") on the TGUI 9680 and
9440 (not supported yet by the driver).  It does not help with the "snow"
on 3DImage and Blade3D cards.

There is also small improvement in timing calculations (hblank start and
vblank start)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: improve probe function

Add missing release of allocated fb_info structure and move enable_mmio() to
fix error path.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix clock settings for older Trident 96XX chips

The Xorg code shows that Trident models 9660, 9680 and 9682 require a
different clock setting method.  Add the second clock setting method for older
models.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: use mmio access for clock setting

Use the mmio outb function instead of direct one.  The mmio registers are
already mapped (in the probe function).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: fix timing calculations

Fix broken timings calculations. This patch helps with following
problems:
 - no left part of screen visible (up to half of the screen)
 - monitor's frequencies are not the ones intended for selected modes
 - if mode with resoultion y > 1024 is selected at least once then
   all modes with y < 1024 are "out of sync" (no display)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: make use of functions and constants from the vga.h

Make use of functions and constants from the vga.h header to compact the code
and make it more readable.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: move global acceleration hooks into structure

This patch moves acceleration hooks into the tridentfb_par structure and
removes global hooks.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: convert is_blade and is_xp macros into functions

This patch converts the is_blade() and is_xp() macros into local functions.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: move global flat panel variable into structure

This patch moves flat panel indicator into tridentfb_par structure and removes
related global variables and macros.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: move global chip_id into structure

This patch moves the chip_id into tridentfb_par structure and removes global
chip_id related constants.

It also bumps version of the driver to 0.7.9

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: move global pseudo palette into structure

This patch moves pseudo palette int tridentfb_par structure and removes global
default_var.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: convert fb_info into allocated one

This patch converts fb_info structure from global variable to allocatable one.

The global default_par is moved into function variable.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tridentfb: replace macros with functions

This patch replaces macros with static functions and puts tridentfb_par
pointer as the first argument of these functions.  These is a step toward
multihead support.

Additionally, bogus TRIDENT_MMIO define is removed as the driver supports
graphics cards only through the mmio mode.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add the carmine FB driver

Basic FB driver for the carmine chip.  The driver registers two FB devices for
the two possible screens.  The DRAM settings can be be switched via Kconfig
(between eval board and custom).

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-vr41xx: add irq_set_freq() and irq_set_state()

Implement the ioctls RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET and
RTC_IRQP_READ in the standard RTC way.

Thanks Dave for noticing it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-cmos: avoid spurious irqs

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-cmos, in two ways:

  - When HPET is stealing the IRQs, use the first IRQ to grab
    the seconds counter which will be monitored (instead of
    using whatever was previously in that memory);

  - In sane IRQ handling modes, scrub out old IRQ status before
    enabling IRQs.

That latter is done by tightening up IRQ handling for rtc-cmos everywhere,
also ensuring that when HPET is used it's the only thing triggering IRQ
reports to userspace; net object shrink.

Also fix a bogus HPET message related to its RTC emulation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-at91rm9200: avoid spurious irqs

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-at91rm9200 by scrubbing old IRQ status
before enabling IRQs.

It also removes nonfunctional periodic IRQ support from this driver;
only update IRQs are reported, or provided by the hardware.

I suspect some other RTCs probably have versions of #11112; it's easy to
overlook, since most non-RTC drivers don't care about spurious IRQs:
they're not reported to userspace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: update IRQ handling

The rtc-s3c.c driver has been using its own ioctl() handling to deal with
alarm and periodic interrupts to handle what should now be done with the
rtc core code.

Change to using the .irq_set_freq and .irq_set_state driver entries and
remove the .ioctl handling.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: add __devexit and __devinit markers

Add the relevant __devinit and __devexit attributes to the rtc-s3c driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-cmos: improve HPET IRQ glue

Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
related to the way the HPET glue code in rtc-cmos was incomplete and
inconsistent:

 * Switch the approach so that the basic driver code flow isn't
   changed by having HPET ... instead, just have HPET shadow the
   RTC_CONTROL irq enables and RTC_FREQ_SELECT data.  It's only
   coping with IRQ thievery, after all.

 * Do that consistently (!!) to avoid problems when the HPET code
   is out of sync with the real RTC intent.  Examples include:

   - cmos_procfs(), which now reports correct data

   - cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
     ioctl support so only one code path manages "periodic" IRQs

   - cmos_do_shutdown() ... currently a "just in case" change.

   - cmos_suspend() and cmos_resume() ... also handling a bug that
     was specific to HPET's IRQ thievery, where the alarm wasn't
     disabled after waking the system

 * Always call that HPET code under the RTC spinlock (it doesn't do
   its own locking)

Also clean up the HPET glue:

 * Add some comments explaining what's going on.

 * Switch to having just one #ifdef for the HPET glue, and inline
   functions (not #defines) to avoid some compiler warnings.

 * Have the probe message also report when HPET IRQs are involved

This still leaves various holes in the HPET glue, like the emulated update
IRQs being out of sync with the RTC, alarms never using day or month
matches, and many extra IRQs (at 64 Hz).

[akpm@linux-foundation.org: fix build]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Carlos R. Mafra <crmafra@ift.unesp.br>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: remove and clarify unneeded externs

When CONFIG_HPET_EMULATE_RTC is defined the external declaration of
hpet_rtc_interrupt is redundant due to the inclusion of hpet.h.

When !CONFIG_HPET_EMULATE_RTC we make it clear that hpet_rtc_interrupt is
not used by defining it to return zero.

Signed-off-by: Carlos R. Mafra <crmafra@ift.unesp.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: convert the PCF8583 driver to the new I2C style framework with device_ids

Convert the PCF8583 driver to the new I2C style framework with device_ids

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-omap footprint shrinkage

Shrink the runtime footprint of the OMAP1 RTC driver a bunch by removing
some old hacks and switching to platform_driver_probe().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: BCD codeshrink

This updates <linux/bcd.h> to define the key routines as constant
functions, which the macros will then call.  Newer code can now call
bcd2bin() instead of SCREAMING BCD2BIN() TO THE FOUR WINDS.

This lets each driver shrink their codespace by using N function calls to
a single (global) copy of those routines, instead of N inlined copies of
these functions per driver.

These routines aren't used in speed-critical code.  Almost all callers are
in the RTC framework.  Typical per-driver savings is near 300 bytes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Adrian Bunk <bunk@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: ds1305/ds1306 driver

Support the Dallas/Maxim DS1305 and DS1306 RTC chips.  These use SPI, and
support alarms, NVRAM, and a trickle charger for use when their backup
power supply is a supercap or rechargeable cell.

This basic driver doesn't yet support suspend/resume or wakealarms.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add support for ST M41T94 SPI RTC

This patch adds kernel driver for M41T94 RTC chip connected via SPI.
I've tested it on two different AT91-based hardwares.

This is third revision of the patch: some comments made by
Alessandro Zummo fixed.

Revision two added support for century bit and fixes.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: remove BKL for ioctl()

Remove implicit use of BKL in ioctl() from the RTC framework.

Instead, the rtc->ops_lock is used.  That's the same lock that already
protects the RTC operations when they're issued through the exported
rtc_*() calls in drivers/rtc/interface.c ...  making this a bugfix, not
just a cleanup, since both ioctl calls and set_alarm() need to update IRQ
enable flags and that implies a common lock (which RTC drivers as a rule
do not provide on their own).

A new comment at the declaration of "struct rtc_class_ops" summarizes
current locking rules.  It's not clear to me that the exceptions listed
there should exist ...  if not, those are pre-existing problems which can
be fixed in a patch that doesn't relate to BKL removal.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: push the BKL down into the driver ioctl method

For now just wrap the main logic, but this driver is a prime candidate for
someone wanting to eliminate the lock entirely

[lizf@cn.fujitsu.com: fix build failure]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: m41t80: use pr_info() as appropriate

Replace printk(KERN_INFO ...) calls with appropriate pr_info(...)
equivalents.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: m41t80: sort header inclusions for readability

Sort the header inclusions for readability.  No functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: remove unused ioctls

The ioctls AUTOFS_IOC_TOGGLEREGHOST and AUTOFS_IOC_ASKREGHOST were added
several years ago but what they were intended for has never been
implemented (as far as I'm aware noone uses them) so remove them.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: reorganize expire pending wait function calls

This patch re-orgnirzes the checking for and waiting on active expires and
elininates redundant checks.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix direct mount pending expire race - correction

Appologies, somehow I seem to have sent an out dated version of this
patch. Here is an additional patch that brings the patch up to date.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix direct mount pending expire race

For direct and offset type mounts that are covered by another mount we
cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads
to lookups walking into an expiring mount while it is being expired.

For example, for the direct multi-mount map entry with a couple of
offsets:

/race/mm1  /      <server1>:/<path1>
           /om1   <server2>:/<path2>
           /om2   <server1>:/<path3>

an autofs trigger mount is mounted on /race/mm1 and when accessed it is
over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2.
So it isn't possible for path walks to see the expiring flag at all and
they happily walk into the file system while it is expiring.

When expiring these mounts follow_down() must stop at the autofs mount and
all processes must block in the ->follow_link() method (except the daemon)
until the expire is complete.  This is done by decrementing the d_mounted
field of the autofs trigger mount root dentry until the expire is
completed.  In ->follow_link() all processes wait on the expire and the
mount following is completed for the daemon until the expire is complete.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix indirect mount pending expire race

The selection of a dentry for expiration and the setting of the
AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups
walking into an expiring mount.

What happens is that an expire is initiated by the daemon and a dentry is
selected for expire but, since there is no lock held between the selection
and setting of the expiring flag, a process may find the flag clear and
continue walking into the mount tree at the same time the daemon attempts
the expire it.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix pending checks

There are two cases for which a dentry that has a pending mount request
does not wait for completion.  One is via autofs4_revalidate() and the
other via autofs4_follow_link().

In revalidate, after the mount point directory is created, but before the
mount is done, the check in try_to_fill_dentry() can can fail to send the
dentry to the wait queue since the dentry is positive and the lookup flags
may contain only LOOKUP_FOLLOW.  Although we don't trigger a mount for the
LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use
the mounted dentry for the lookup.

In autofs4_follow_link() the dentry is not checked to see if it is pending
so it may fail to call try_to_fill_dentry() and not wait for mount
completion.

A dentry that is pending must always be sent to the wait queue.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: cleanup redundant readir code

The mount triggering functionality of readdir and related functions is no
longer used (and is quite broken as well).  The unused portions have been
removed.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>