zhangjiaquan [Thu, 27 Dec 2018 03:53:57 +0000 (22:53 -0500)]
(CR):[Kane][kernel]audio:spk pa not power off cause high current
1,disalbe mbox that disturb the irq when pa power off
2,update the delay to make sure pa power off status is stable
Change-Id: I0ffd8983b77aec53a9e9ab8e0ec0ae381841f887
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
zhangyijie [Wed, 26 Dec 2018 09:50:05 +0000 (17:50 +0800)]
(CR)[Kane]:[kernel]motor update rtp (1/2)
motor update driver for rtp mode
Change-Id: I68d1e4e4b642dfe79215e059d4e1e59dcd8c6eaa
zhangbin [Wed, 26 Dec 2018 11:54:57 +0000 (19:54 +0800)]
(CR):[kane][sensor]:optimize the sar sensor power consumption
optimize the sar sensor power consumption when suspend
Change-Id: Ib5f09e2bb884f70a4689a7176ba9143a1183a320
Signed-off-by: zhangbin <zhangbin@huaqin.com>
zhangjiaquan [Wed, 26 Dec 2018 12:01:08 +0000 (07:01 -0500)]
(CR):[Kane][kernel]audio:spk pa not power off cause high current
1,wait the pa status to stable when power off
Change-Id: Ife2af1e7c2b35ea2edcdc883381fe62587d3c2aa
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
Wooyeon Kim [Wed, 19 Dec 2018 07:31:52 +0000 (16:31 +0900)]
[9610][Robusta2] dtsi: camera: modify DVFS level each scenarios
- refer to Ramen_Robusta2_Camera_DVFS.xlsx in EDM
PR JIRA ID: CPR-524
Change-Id: Ie0c63acb4a6ccbde5ad93e5662c19ef1078645f0
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
wangjiao [Tue, 25 Dec 2018 06:54:43 +0000 (14:54 +0800)]
(CR):[Kane]:[factory]Modfiy the HIX83112A MIPI clk to 1386Mhz
Change-Id: Ie502185fff176164c9cdcea5e6a74b99ad8661b8
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
hq_guohongtao5_tmp [Mon, 24 Dec 2018 09:28:53 +0000 (17:28 +0800)]
(CR):[factory]:kernel:separate the robusta2 defconfig from erd9609 defconfig
separate the robusta2 defconfig from erd9609 defconfig
Change-Id: I10af69381d4c48d927aa7c7175f18bd79e192789
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Fri, 21 Dec 2018 03:15:34 +0000 (11:15 +0800)]
(CR):[facotry]:add utc time in prink
add utc time in prink
Change-Id: I2b464c0e88c435a3a7b4362b85b725bda14d9f8f
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
Wooyeon Kim [Mon, 10 Dec 2018 10:18:23 +0000 (19:18 +0900)]
[COMMON] fimc-is2: release a bcm comment at driver
- wrong start address is fixed
Change-Id: I3a772e9d0b2bef88c8dc48aad976f084a72d1bb2
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Jeongtae Park [Sun, 2 Dec 2018 09:47:06 +0000 (18:47 +0900)]
[COMMON] fimc-is2: add validation checking for v4l2_buffer before copy them to pipe
PR JIRA ID: CPR-471
Change-Id: I25453e0135941848b5ea512f095e08ea5e9bca8e
Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
zhixueyin [Mon, 24 Dec 2018 02:35:20 +0000 (10:35 +0800)]
(CR):[kane]:kernel: use thermal temperature as battery temp
use thermal temperature as battery temp
Change-Id: I727feed181859b4e1b71e064d9316a443add2fc1
baitong [Sat, 22 Dec 2018 09:56:56 +0000 (17:56 +0800)]
(CR):[kane][sdcard]block: remove QUEUE_FLAG_BYPASS for sdcard in blk_remove_req.
Change-Id: I0c5a8ed3b04bd73391dcda930460d996f29fc5fc
ChiHun Won [Wed, 19 Dec 2018 02:16:51 +0000 (11:16 +0900)]
[RAMEN9610-9644] fbdev: dpu20: added dsim ddi device type
Change-Id: I54c7e88dda5a9dc2cf988cc90f4efbeedb3e4b69
Signed-off-by: ChiHun Won <chihun.won@samsung.com>
Youngmin Nam [Mon, 17 Dec 2018 06:47:22 +0000 (15:47 +0900)]
[RAMEN9610-9569][Robusta2][9610] arm64: dts: remove SoC feature from board dts
This patch removes SoC feature to resolve VtsFirmwareDtboVerification
Change-Id: Icab2c35adf661d9f086c8ce595f2930a2dca1634
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
zhangyijie [Thu, 20 Dec 2018 07:12:22 +0000 (15:12 +0800)]
(CR)[Kane]:[kernel]motor shorten probe time(1/1)
motor update driver code for shorten driver probe time
Change-Id: Id89d18da218e362ed1afbf1ac327208c7c85b25d
hq_guohongtao5_tmp [Sat, 15 Dec 2018 06:13:02 +0000 (14:13 +0800)]
(CR):facotry:kane:sync defconfig file for robusta2
sync defconfig file for robusta2
Change-Id: I5e617a15f9ebd9ac26f977379ddad90986661051
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
Jiyoung Jeong [Thu, 13 Dec 2018 00:52:07 +0000 (09:52 +0900)]
[RAMEN9610-9427][MODAP-10498][Robusta2] robusta2_evb_defconfig: enable ppp configs
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=y
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
Change-Id: I9e8ee19b84b4b2c4afc9c150cb28987a9e28a827
Signed-off-by: Jiyoung Jeong <ji_0.jeong@samsung.com>
Jiyoung Jeong [Thu, 13 Dec 2018 00:32:25 +0000 (09:32 +0900)]
[RAMEN9610-9427][Robusta2] robusta2_evb_defconfig: enable VTS robusta2 config
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_L2TP=y
+CONFIG_PPTP=y
+CONFIG_PPPOL2TP=y
Change-Id: Ia95b8cf4b47c9f7bcc158785f7a36ce6a03a638b
hskang [Wed, 12 Dec 2018 13:22:49 +0000 (22:22 +0900)]
[RAMEN9610-9421][ROBUSTA2] arm64: robusta2_evb_defconfig: Enable CPUSET.
Change-Id: Ib51487b9cccf43ab47edfb91a4ff4e77f199cc69
Signed-off-by: hskang <hs1218.kang@samsung.com>
hskang [Wed, 12 Dec 2018 13:20:57 +0000 (22:20 +0900)]
[RAMEN9610-9418][ROBUSTA2] CFI, LTO Enabling
Change-Id: I05d8c0418d394fe3d37c1070eba95661f80f186d
Signed-off-by: hskang <hs1218.kang@samsung.com>
Boojin Kim [Thu, 6 Dec 2018 01:46:43 +0000 (10:46 +0900)]
[RAMEN9610-9393] arm64: dts: Unmasked INT_MBOX_SHUB2AP from wakeup_mask.
Change-Id: I970558f8e83ee063f6835dbf8cd0fa9055727749
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
hwangjae lee [Mon, 10 Dec 2018 01:18:49 +0000 (10:18 +0900)]
[RAMEN9610-9310][Robusta2] fbdev: dev: DPU recovery when read timeout is occurred
Change-Id: I2287eb166b7e1713b90208b5758a137a8f39b4d5
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
Kisang Lee [Mon, 10 Dec 2018 01:45:30 +0000 (10:45 +0900)]
[RAMEN9610-9298][9609] defconfig: enable USB_AUDIO and increase CMA memory
Change-Id: I9d5c4a24dfb379924e404064c23f8476c476011c
Signed-off-by: Kisang Lee <kisang80.lee@samsung.com>
zhangjiaquan [Fri, 14 Dec 2018 07:06:53 +0000 (02:06 -0500)]
MODAP-10860:[Kane][kernel]:Audio loss issue during call for Robusta2
1,VDD CODEC 1P2 is pull down when abox suspend in voice call
2,keep the VDD CODEC 1P2 to pull up
Change-Id: Icd88e7c2c678017b08a06082826bdf582ee8b542
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
zhangyijie [Thu, 13 Dec 2018 01:56:45 +0000 (09:56 +0800)]
(CR)[Kane]:[kernel]motor update driver code(1/1)
motor update driver code for moto compatible
Change-Id: Ifbe163bfef8983d9f012b5d2010383c0e9b458c6
Wooyeon Kim [Wed, 12 Dec 2018 08:16:04 +0000 (17:16 +0900)]
[9610][ROBUSTA2] dts: camera: add dual sync mode for GM1 & 5E9
PR JIRA ID: CPR-491
Change-Id: I004f378863f6515e56dc89c9c44ebb26fc87eef0
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Wooyeon Kim [Tue, 11 Dec 2018 11:40:47 +0000 (20:40 +0900)]
[COMMON] dt_binding: camera: add dual sync mode define
- for distinguish each project's sensor dual sync mode
PR JIRA ID: CPR-491
Change-Id: Ic2d2bdf4786671ca2ee1468b2d798a6a44ed99ed
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Junhan Bae [Tue, 11 Dec 2018 05:22:17 +0000 (14:22 +0900)]
[9610] drivers : fix try snk problem
There is possibility that error occured about try-snk
I fix it to operate better
Change-Id: If23bbef1a42d5e6d0a8f2d3b452943b0972e6799
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
hq_qiaoquanbin_tmp [Mon, 10 Dec 2018 03:15:32 +0000 (11:15 +0800)]
(CR):[Kane]:[factory] [2/2] tp:fix ESD recovery and upgrade novatek v03 firmware.
Change-Id: Ie764f16dca0476e224c852dfc7e01fd523a84dbe
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
Boyoung [Fri, 7 Dec 2018 11:08:22 +0000 (20:08 +0900)]
chub: increase chub fw error threshold
chub sensor driver detects invalid error
if chub fw booting is delaied with multi-os booting
Change-Id: Ie3712367ad39b6b25062d605380b222017ce76b5
Signed-off-by: Boyoung <eric.by.kim@samsung.com>
hq_qiaoquanbin_tmp [Fri, 7 Dec 2018 10:28:06 +0000 (18:28 +0800)]
(CR):[Kane]:[factory] tp:fix selftest result save to csv file process.
Change-Id: I62739af66e2f515c7d22656fa782e546c48639fc
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
zhangyijie [Fri, 7 Dec 2018 06:35:52 +0000 (14:35 +0800)]
(CR)[Kane]:kernel:motor add short vibrate(2/2)
motor add ram mode for short vibrate
Change-Id: I70c7e40ec9f22c94f876a60d23838c1c2b6a397a
sanghwan park [Wed, 5 Dec 2018 10:24:39 +0000 (19:24 +0900)]
[RAMEN9610-9177][9610] defconfig: Add vipx
Change-Id: I8f6374b10eb7396992864c0b3cedf3080aa87317
Signed-off-by: sanghwan park <senius.park@samsung.com>
hskang [Wed, 5 Dec 2018 14:04:07 +0000 (23:04 +0900)]
[RAMEN9610-9150][Robusta2] Enable CONFIG_NETFILTER_XT_MATCH_BPF
Change-Id: Ice7e406915fe16fe2739c61ae1c81f5cd5e2a334
Signed-off-by: hskang <hs1218.kang@samsung.com>
ChiHun Won [Thu, 29 Nov 2018 08:23:08 +0000 (17:23 +0900)]
[RAMEN9610-9075] arm64: config: enabled dqe feature
Change-Id: Ib2fa8eec512e4132cff4442addb60db28248687d
Signed-off-by: ChiHun Won <chihun.won@samsung.com>
hwangjae lee [Thu, 6 Dec 2018 07:57:22 +0000 (16:57 +0900)]
[Robusta2] fbdev: dpu: unnecessary sequence is removed
Change-Id: I118aa7325d1741150a48a4d6257534f5beafd9a6
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hq_qiaoquanbin_tmp [Thu, 6 Dec 2018 02:34:27 +0000 (10:34 +0800)]
Merge "(CR):[kane]:tp:Modify the charger change tp parameter" into huaqin/exynos9609
Change-Id: I9df38bd907c121f3313f79af9300bcc5338b142c
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
wangjiao [Wed, 5 Dec 2018 02:36:23 +0000 (10:36 +0800)]
(CR):[Kane]:[factory]Add Second lcd esd recovery function
Change-Id: I8223c499255a4b85ab57d1ef6f639bd7aeda2182
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
wangdw10 [Mon, 3 Dec 2018 08:43:24 +0000 (16:43 +0800)]
[COMMON] fimc-is2: Add AWB limit check for 2X5SP
Change-Id: Ib6c4ed307826fad3f3d64dd5f4627630ca7e57f0
Signed-off-by: wangdw10 <wangdw10@lenovo.com>
baitong [Mon, 3 Dec 2018 03:26:09 +0000 (11:26 +0800)]
(CR):[Kane]:FPS:Add fingerprint navigation
Change-Id: I53dad21d1384ead4837a8e4a4eef760b9d804628
Signed-off-by: baitong <baitong@huaqin.com>
Wooyeon Kim [Wed, 25 Jul 2018 02:33:44 +0000 (11:33 +0900)]
[COMMON] fimc-is2: sync cis_ext2 sensor interface
cis_ext2 interface sync with other project
PR JIRA ID: CPR-100
Change-Id: I1f340a1b14eee30e780030d091c42a2444f6008e
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
wangjiao [Fri, 30 Nov 2018 06:54:44 +0000 (14:54 +0800)]
(CR):[Kane]:[factory]Modify lcd suspend write faill issue
Change-Id: I51f21313d99154c1d7d49058a1330aa534545547
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
hq_qiaoquanbin_tmp [Wed, 28 Nov 2018 14:17:21 +0000 (22:17 +0800)]
(CR):[1/3] Merge "[Robusta2] tp: add tianma secondary supplier TP driver"
into huaqin/exynos9609
Change-Id: I53a960eccad271203e41a1d97a77ea622d740302
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
xiongzuan_w [Thu, 29 Nov 2018 13:10:04 +0000 (21:10 +0800)]
(CR):[kane]:thermal:Modify the charger_temp temperature unit
Modify the charger_temp temperature unit for thermal
Change-Id: Ie36760e1dbf14dc27623811faa2ef8c021a3cbff
Signed-off-by: xiongzuan_w <xiongzuan@huaqin.com>
wangjiao [Thu, 29 Nov 2018 03:52:50 +0000 (11:52 +0800)]
(CR):[Kane]:[factory]Modify lcd mipi timing value
Change-Id: I9fc9795dafc6a918e5d3a62cdc311e2d42e82d1f
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
zhangjiaquan [Mon, 26 Nov 2018 16:21:56 +0000 (11:21 -0500)]
(CR):[Kane]kernel:update firmware name to keep same widget
update firmware name to keep same widget, update same widget when
load new firmware.
Change-Id: If968fa07715683c7ebce05e3048129267e5bcf3c
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
libm1 [Tue, 27 Nov 2018 11:59:15 +0000 (19:59 +0800)]
[9610] defconfig: Add OIS configs
Change-Id: I4ae2f9311649a2a35c0fefb5fe503cae1314f9db
Signed-off-by: libm1 <libm1@lenovo.com>
wangjiao [Wed, 28 Nov 2018 03:04:08 +0000 (11:04 +0800)]
(CR):[Kane]:[factory]Modify lcd R51/R55 reg
Change-Id: I87cc15f854ecd22af7034d5d9cf4186c507a2d9d
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
libm1 [Tue, 27 Nov 2018 11:51:25 +0000 (19:51 +0800)]
[9610] dtsi: Add a GM1SP ois node
Change-Id: I517c51568f54d54d8f1c8638588fc2ed43d4ee61
Signed-off-by: libm1 <libm1@lenovo.com>
dan huh [Wed, 21 Nov 2018 01:41:23 +0000 (10:41 +0900)]
[9610] dtsi: Add a use_otp_cal value for 2x5 sensor
PR JIRA ID: CPR-451
Change-Id: I7d5264625d7e45cda155fc532d246d1d369428df
Signed-off-by: dan huh <dan.huh@samsung.com>
dan huh [Fri, 16 Nov 2018 06:07:59 +0000 (15:07 +0900)]
[COMMON] defconfig: Add a 5E9 configs
PR JIRA ID: CPR-451
Change-Id: I1ddc19aedc10f9efa4f6479c3e9ed416b9d96ee5
Signed-off-by: dan huh <dan.huh@samsung.com>
dan huh [Fri, 16 Nov 2018 04:10:20 +0000 (13:10 +0900)]
[9610] dtsi: Add a 5E9 eeprom node
PR JIRA ID: CPR-451
Change-Id: If70ac4c6a8108f3f306edb13c9cd3f2425140017
Signed-off-by: dan huh <dan.huh@samsung.com>
dan huh [Fri, 9 Nov 2018 09:48:15 +0000 (18:48 +0900)]
[9610] defconfig: Add EEPROM configs
PR JIRA ID: CPR-451
Change-Id: I24a1c7dca378959c85e09f669ffd621b3dcf8e8a
Signed-off-by: dan huh <dan.huh@samsung.com>
dan huh [Fri, 9 Nov 2018 09:45:33 +0000 (18:45 +0900)]
[9610] dtsi: Add a eeprom node for i2c and name
PR JIRA ID: CPR-451
Change-Id: Ib0dfe2d4523ea5512808d7aea4e95e93480a2560
Signed-off-by: dan huh <dan.huh@samsung.com>
wangdw10 [Mon, 26 Nov 2018 10:18:35 +0000 (18:18 +0800)]
[COMMON] fimc-is2: add sensor g_mode log for debug
Change-Id: I6f1daf0a164cfc4f72094494f2cdb77107d798f9
Signed-off-by: wangdw10 <wangdw10@lenovo.com>
wangjiao [Mon, 26 Nov 2018 03:27:15 +0000 (11:27 +0800)]
(CR):[Kane]:[factory]Add lcd esd recovery function
Change-Id: Iec169ad6f86357a1f9d307263a003384c424347c
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
baitong [Fri, 23 Nov 2018 12:47:56 +0000 (20:47 +0800)]
(CR):[Kane]:FPS:modify fingerprint can not wake up device
Change-Id: Id61289415da03d1743d743ade98b4e69d90c23b7
Signed-off-by: baitong <baitong@huaqin.com>
zhangyijie [Fri, 23 Nov 2018 02:24:02 +0000 (10:24 +0800)]
(CR)[Kane]:kernel:motor add short vibrate(1/2)
motor add ram mode for short vibrate
Change-Id: Idc7b7c135764d2b2f985c3fd727a9944959cd776
wangjiao [Fri, 23 Nov 2018 06:36:17 +0000 (14:36 +0800)]
(CR):[Kane]:[factory]Modfiy tm lcd id order
Change-Id: I92f0614c12ef8d77af6c4d00f74e033dc16ff83e
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
Youngmin Nam [Thu, 22 Nov 2018 12:15:15 +0000 (21:15 +0900)]
[9610] arm64: dts: separate dts and dtsi of SoC
Change-Id: I49014c18e6d234948afb1af1effea2384b24ea2a
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
wangjiao [Thu, 22 Nov 2018 09:02:07 +0000 (17:02 +0800)]
(CR):[Kane]:[factory]add tm second lcd driver
Change-Id: Ib02b30851dd3a197429493bb19d776b9b9ddb391
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
Youngmin Nam [Wed, 21 Nov 2018 10:16:17 +0000 (19:16 +0900)]
[9610][EVB] arm64: dts: seperate specific board dts from common board dtsi
Change-Id: Ib5494a45cea2b6bdd5fb278195c921521d7bd0d8
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Junhan Bae [Mon, 19 Nov 2018 07:40:16 +0000 (16:40 +0900)]
BSP : add CCIC TRY SNK FUNCTION
[9609][EVB] drivers: add ccic try snk function
Bug:HQ00000000
Workaround:no
Change-Id: I6d1165e226065505d2e4ea7b3914247a60b1f88e
Junhan Bae [Wed, 21 Nov 2018 08:38:59 +0000 (17:38 +0900)]
BSP : add patch to check ccic irq
[9609][EVB] drivers: add patch to check ccic irq
Bug:HQ00000000
Workaround:no
Change-Id: I6d1165e226065505d2e4ea7b3914247a60b1f88e
Change-Id: Ic8c37877a8e9ca81514bdee8d2af17d2e9180a20
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
hwangjae lee [Mon, 5 Nov 2018 09:29:33 +0000 (18:29 +0900)]
[Robusta2] arm64: configs: CONFIG_PANEL_INIT_LPDT is enabled
Change-Id: I73d2967810288517965497141a1287fcd1c708bb
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
hwangjae lee [Fri, 2 Nov 2018 08:23:10 +0000 (17:23 +0900)]
[Robusta2] fbdev: dpu: command is written in LPDT mode
Change-Id: I045783d47f7fa15ab3228c9b1d1af1d6b0ce7cc9
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
yanfei [Tue, 20 Nov 2018 12:38:34 +0000 (20:38 +0800)]
(CR):[kane][kernel]:Modify Capsensor interrupt function
Modify for Capsensor interrupt function
Change-Id: Iee01e71ccef1cf069e270607b68598a0ac1fea8c
Signed-off-by: yanfei <yanfei5@huaqin.com>
zhangjiaquan [Mon, 19 Nov 2018 07:48:32 +0000 (02:48 -0500)]
(CR):[Kane]audio:update audio-parameter-for cs-11-19
1,update aac audio-parameters
2,change the name sec to qisheng
3,increase timeout
4,firmware loading timeout issue
Change-Id: If82d9f595940698d594d0978dbdab20171b07946
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
Wooyeon Kim [Wed, 14 Nov 2018 02:42:48 +0000 (11:42 +0900)]
[COMMON] fimc-is2: add function for dw9839 actuator actual ADC position read
- dw9839 actuator supports a actual ADC position
PR JIRA ID: CPR-397
Change-Id: I24e70c6666013d7f3c485a8f1fc2aa7aee83c0a7
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
hq_guohongtao5_tmp [Mon, 19 Nov 2018 09:36:17 +0000 (17:36 +0800)]
(CR):[factory]:[kane]:kernel:modify usb serialno
modify usb serialno
Change-Id: I0b7aa5aabff98b82d27ca0711e8f31620701b72e
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
liuguangchao [Thu, 15 Nov 2018 21:13:41 +0000 (05:13 +0800)]
(CR):[Kane]:sdcard:remove uhs in dtsi deal with class10 card recognize
Change-Id: I0d2e1d28cae343a8ef2b15ed3e47fdbf6ca075c0
zhangyijie [Thu, 15 Nov 2018 09:22:43 +0000 (17:22 +0800)]
(CR):[Kane]:dts:TP midified i2c CLK (1/1)
Modified TP i2c clk frequence in dtsi file
Change-Id: I8f02073cd404bcae654fe3cd6894061518797f4a
ts_songwei1113_tmp [Thu, 15 Nov 2018 06:22:52 +0000 (14:22 +0800)]
kernel:dts change rear aux sensor 5e9 setfile from setA to setC
Change-Id: I9c939cae004ec8de8e3a131e55dc3b48f5c38dd0
Youngsoo [Thu, 15 Nov 2018 02:42:41 +0000 (11:42 +0900)]
[9610] wlbt: update platform config for robusta2_dualfem
update to leman_s620_robusta2_dualfem
Change-Id: Iff9b224211dda30c9a294be0d58f628f761c065c
hq_qiaoquanbin_tmp [Wed, 14 Nov 2018 12:03:24 +0000 (20:03 +0800)]
(CR):[1/2] Merge "[Robusta2] tp: change firmware and esd process for fix tp invalid
when doing esd" into huaqin/exynos9609
Change-Id: I0b0e6b6e7eea27c48720ef55fea9c121de61160f
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
xingbin [Mon, 12 Nov 2018 13:24:03 +0000 (21:24 +0800)]
(CR):[Kane]:add backlight i2c device for high light mode
Change-Id: I9b5e8171f4446ce26a823b66908917876e6b11a1
Signed-off-by: xingbin <xingbin@huaqin.com>
xuke [Fri, 9 Nov 2018 07:59:29 +0000 (15:59 +0800)]
(CR) [Kane]:kernel:modify ntc thermistor and add charge temp node
Change-Id: I79a1e23f2a341e107626e21067bd65a4e52e3bcd
Charles Keepax [Mon, 19 Dec 2016 13:13:51 +0000 (13:13 +0000)]
ASoC: madera: Fix virtual input mux
The virtual input muxes should have been attached back to the
DSP widget when the preloader was turned into a supply widget,
as you can't have a DAPM route going from a non-supply widget to
a supply widget. ie. Supply widgets can only be the source of a
path with non-supply widgets. This patch makes this change.
Change-Id: I4e1e55857416397c961a7d2c80b016eff7be7404
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Wooyeon Kim [Fri, 9 Nov 2018 06:10:25 +0000 (15:10 +0900)]
[9610][Robusta2] dts: camera: modify settings for apply GM1/2X5 setB
Change-Id: I6399a327e5454fa9f521b67b7f0c49c1da1cd1e3
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
hq_guohongtao5_tmp [Thu, 8 Nov 2018 08:50:56 +0000 (16:50 +0800)]
Revert "(CR):[factory]:[kane]:kernel: use trackid as adb device number"
This reverts commit
ced15c68af06c78d5615ea63439b2995c81540cf.
hq_guohongtao5_tmp [Thu, 8 Nov 2018 08:49:13 +0000 (16:49 +0800)]
Revert "(CR):[factory]:[kane]:defconfig: use trackid as adb device number"
This reverts commit
0badc8d15b85ca831a895f34701e7b1256e6ebc0.
zhangjiaquan [Wed, 7 Nov 2018 09:39:23 +0000 (04:39 -0500)]
(CR):[Kane]kernel: match micbias ext-cap name
match the name of ext-cap in dtsi and medera core
Change-Id: Ief7a4297191e32ba3c8cd1d0e2ad2f1bdae6a737
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
yanfei [Tue, 6 Nov 2018 07:12:27 +0000 (15:12 +0800)]
(CR):[kane]:[kernel]: modify for capsensor Channel
Modify for capsensor Channel
Change-Id: Ide02383e7694e9373af6f8e3b422244eb16c2903
Signed-off-by: yanfei <yanfei5@huaqin.com>
hwangjae lee [Thu, 25 Oct 2018 02:26:28 +0000 (11:26 +0900)]
[Robusta2] fbdev: dpu20: panel: max_brightness constraints is added for
thermal solution
Change-Id: Ibad5a40d9c1c33c458e676a1a9d0f06298f8874e
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>
ts_songwei1113_tmp [Mon, 5 Nov 2018 09:45:42 +0000 (17:45 +0800)]
change iic div calculation formula for frquency not up to the set value
Change-Id: Ic6514913c0cb9062ef8daaffb433601f6dad6bb3
zhangjiaquan [Mon, 5 Nov 2018 05:58:08 +0000 (00:58 -0500)]
(CR):[Kane]kernel:change codec firmware loading solution
1,keep Moto Aov firmware pre configure only
2,support spilit size for CS35l41 firmware
3,add cirrus ez2record firmware format
4,loadting the codec aov firmware in the AP
Change-Id: I321318fbe8f7b92f914a5d7cdaa860b156cb47bd
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
Junhan Bae [Wed, 17 Oct 2018 05:28:13 +0000 (14:28 +0900)]
[9609][EVB] drivers: add ccic usb connector direction check
Bug:HQ00000000
Workaround:no
Change-Id: I1b0d464c1e73043dc263229431fb6fc13e922834
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
hq_qiaoquanbin_tmp [Sat, 3 Nov 2018 02:01:17 +0000 (10:01 +0800)]
Merge "(CR):[Kane]kernel:add frimware upgrade status node" into huaqin/exynos9609
Change-Id: I0dccabbb98129b54a159474052d5b520c00a1c2b
Signed-off-by: hq_qiaoquanbin_tmp <qiaoquanbin@huaqin.com>
xuke [Sat, 3 Nov 2018 13:18:46 +0000 (21:18 +0800)]
(CR):[Kane]:kernel:modify charger policy
Change-Id: Ia401db9a5bbc6411f75fd5cb2332cb9b938a674a
hq_guohongtao5_tmp [Sat, 3 Nov 2018 08:37:38 +0000 (16:37 +0800)]
(CR):[factory]:[kane]:defconfig: use trackid as adb device number
use trackid as adb device number
Change-Id: Ia64dcf840c6e1e08f6c514b4b770dacebba38dc4
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
hq_guohongtao5_tmp [Sat, 3 Nov 2018 08:36:20 +0000 (16:36 +0800)]
(CR):[factory]:[kane]:kernel: use trackid as adb device number
use trackid as adb device number
Change-Id: I5a5409f3a6ababa284a611adc0be6045167d032d
Signed-off-by: hq_guohongtao5_tmp <guohongtao5@huaqin.com>
zhangjiaquan [Thu, 1 Nov 2018 12:07:11 +0000 (08:07 -0400)]
(CR):[Kane][factory]kernel:calibrate spk of aac and qisheng
calibrate spk separately for aac and qisheng box
Change-Id: I1cb2b835da89b6bbce3b8cf2b909a601b86f5e46
Signed-off-by: zhangjiaquan <zhangjiaquan@huaqin.com>
Boyoung [Wed, 24 Oct 2018 01:28:51 +0000 (10:28 +0900)]
chub : added os selection option on device tree
Change-Id: Ie1f50811f154b9b5ee7dd38059058aa48df35011
Signed-off-by: Boyoung <eric.by.kim@samsung.com>
wangjiao [Wed, 31 Oct 2018 08:33:46 +0000 (16:33 +0800)]
(CR):[Kane]:[factory]Modify the tm lcd power on/off sequence
Change-Id: I01e270af86e6904c4b20d16456593ffdcd03ff4a
Signed-off-by: wangjiao <wangjiao1@huaqin.com>
Wooyeon Kim [Mon, 8 Oct 2018 05:00:32 +0000 (14:00 +0900)]
[9610][EVB] arm64: defconfig: add defconfig for dw9839 actuator
PR JIRA ID: CPR-350
Change-Id: Ife909377c4802a2db2f74e42044d92fa7889bf0b
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Wooyeon Kim [Mon, 8 Oct 2018 04:58:49 +0000 (13:58 +0900)]
[9610][EVB] dts: camera: add dw9839 actuator dts
PR JIRA ID: CPR-350
Change-Id: I623369453e84ad5894028ea9207f7af4a68abbd4
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Wooyeon Kim [Thu, 25 Oct 2018 01:16:59 +0000 (10:16 +0900)]
[9610] arm64: dts: remove always-on flag for LDO38, LDO44 for camera
- for optimize, removed un-neccesary flag
PR JIRA ID: CPR-350
Change-Id: Ie6d1fd7b3b9b3b08d56caf44fec45a29e9314788
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
ShinHyung [Tue, 30 Oct 2018 08:24:41 +0000 (17:24 +0900)]
[9609][EVB] dts: Added PA-reset gpio configuration at sleep state
Change-Id: I9186ad48ba970692488346e3022e84f8e5a2a33a
Signed-off-by: ShinHyung <s47.kang@samsung.com>
yanfei [Tue, 30 Oct 2018 06:20:30 +0000 (14:20 +0800)]
(CR):[kane]:[kernel]: modify for capsensor power
Modify for capsensor power
Change-Id: Ifb3c9eb0820a1391c8bb16433e9e2b740486eca0
Signed-off-by: yanfei <yanfei5@huaqin.com>
liuqiang [Mon, 29 Oct 2018 08:41:56 +0000 (16:41 +0800)]
enable CONFIG_MODEM_IF_ADAPTIVE_QOS in robusta2_evb_defconfig & wing_defconfig
Change-Id: I747909b2638002e21e200aec583866085bb933d2
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log