Staging: ipack/devices/ipoctal: Check tty_register_device return value.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Clean up device removal.

Make use of dev_set_drvdata() and dev_get_drvdata() to store and obtain
a pointer to the ipoctal struct corresponding to a struct dev.
Previously we relied on a private list of devices.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Let interrupts return irqreturn_t.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: move tpci200_free_irq() and tpci200_request_irq()

Now, all the interrupt related functions are next to each other.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: More cleanups.

Rename __tpci_request_irq() to tpci_enable_irq() and __tpci_free_irq()
to tpci_disable_irq().  Change their second argument, move them above
tpci200_interrupt(), and use tpci_disable_irq() in the latter

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Cleanup in tpci200_slot_irq() and tpci200_interrupt()

Minor cleanup.  No functional changes.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Clean up interrupt handling.

Previously the return value from tpci200_interrupt was not quite correct
if a slot had caused an interrupt but no handler was instellalled:
IRQ_NONE was returned.  However in this case we react to the interrupt
by disabling the IPack device interrupt.

Basically there are two cases the code now distinguishes:
 - The tpci200 has raised an interrupt.  We handle it and return
   IRQ_HANDLED.
 - Our device did not raise an interrupt. We return IRQ_NONE.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Protect device registers with spinlock.

Some of the device registers are accessed from both interrupt and
non-interrupt context.  To ensure proper read-modify-write modification
of these registers we can not use the  "global" tpci200 mutex.  Instead
a spin-lock is used.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: RCU protect slot_irq pointers.

In tpci200_request_irq as well as tpci200_free_irq we set and unset the
pointer to struct slot_irq.  This pointer is accessed in
tpci200_interrupt.  To ensure that the pointer is not freed after it has
been fetched in tpci200_interrupt() it is now protected through RCU.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: remove superfluous function.

ipoctal_write_tty and ipoctal_write are merged.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Split interrupt service routine.

Split the IRQ service routing in TX part and RX part.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Store isr masks in ipoctal_channel

This way interrupt handling becomes independent of the channel number.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: put ipoctal_channel into tty->driver_data.

Each tty's driver_data is now pointing to the channel it is talking to.  struct
ipoctal_channel contains all the information the callbacks require to do their
work.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: Directly use ioread/iowrite function.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: split ipoctal_channel from ipoctal.

By moving everything channel related into a separate struct we will be
able to clean up a lot of code.  In the end tty->driver_data will no
longer need to point to ipoctal but instead can point to the respective
channel.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Clean up interrupt handler.

This also removes a possible bug in the unhandles_ints part when
slots[i] is not set.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Remove side effects of tpci200_{request,free}_irq.

Use the __tpci200_{set,clear}_mask routines to access control
register.  Do not overwrite flags unrelated to interrupt handling.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: add helpers for writing control regs.

Convert tpci200_set_clockrate and tpci200_interrupt.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: gdm_usb coding style clean up

gdm_usb.* coding style clean up.

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: prevent video RAM size exceeding PCI window size

Add a sanity check for the video RAM size. It should fit into the
PCI window.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: validate the mode against video memory size

It's possible to select video mode that exceeds the available video
memory. This is potentially dangerous, fix by adding a check.

The patch fixes system hangs seen occasionally when playing random videos
with mplayer.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove S_IWOTH from proc declaration

We don't need these to be world writable or group writable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/gdm72xx/gdm_sdio.c: Remove useless kfree

Remove useless kfree() and clean up code related to the removal.

The semantic patch that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
position p1,p2;
expression x;
@@

if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; }

@unchanged exists@
position r.p1,r.p2;
expression e <= r.x,x,e1;
iterator I;
statement S;
@@

if (x@p1 == NULL) { ... when != I(x,...) S
                        when != e = e1
                        when != e += e1
                        when != e -= e1
                        when != ++e
                        when != --e
                        when != e++
                        when != e--
                        when != &e
   kfree@p2(x); ... return ...; }

@ok depends on unchanged exists@
position any r.p1;
position r.p2;
expression x;
@@

... when != true x@p1 == NULL
kfree@p2(x);

@depends on !ok && unchanged@
position r.p2;
expression x;
@@

*kfree@p2(x);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/r8192U_core.c: Remove useless kfree

Remove useless kfree() and clean up code related to the removal.

The semantic patch that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
position p1,p2;
expression x;
@@

if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; }

@unchanged exists@
position r.p1,r.p2;
expression e <= r.x,x,e1;
iterator I;
statement S;
@@

if (x@p1 == NULL) { ... when != I(x,...) S
                        when != e = e1
                        when != e += e1
                        when != e -= e1
                        when != ++e
                        when != --e
                        when != e++
                        when != e--
                        when != &e
   kfree@p2(x); ... return ...; }

@ok depends on unchanged exists@
position any r.p1;
position r.p2;
expression x;
@@

... when != true x@p1 == NULL
kfree@p2(x);

@depends on !ok && unchanged@
position r.p2;
expression x;
@@

*kfree@p2(x);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Create and initialize new device id in InterfaceInit

This patch create and initalizes a new device
id of 0x172 as reported by Rinat Camalov
<richman1000000d@gmail.com>. In addition, a
comment is added to the potential invalid
existing device id.

Reported-by: Rinat Camalov <richman1000000d@gmail.com>
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove devpriv macro

This macro relies on a local variable having a specific name.

Also, remove the kfree in the detach. The comedi core handles
the kfree of dev->private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use cfc_check_trigger_src

The the cfc_check_trigger_src helper for the "step 1" tests in
pci9118_ai_cmdtest().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove forward declarations

Move some of the functions to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove commented out printk debug

These debug messages should be removed from the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove the function separation comments

These are just unnecessary whitespace.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove PCI9118_EXTDEBUG and DPRINTK

These macros enable a bunch of function trace messages. These should
not be in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove devpriv and this_board macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use cfc_check_trigger_is_unique

Use the helper function cfc_check_trigger_is_unique for the "step 2a"
tests of pci171x_ai_cmdtest().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: single source triggers are unique

If a single source trigger passes "step 1" of the do_cmdtest function
they are already unique. There is no need to recheck them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use cfc_check_trigger_src

Use the helper function cfc_check_trigger_src for the "step 1"
tests of pci171x_ai_cmdtest().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove "dummy" boardinfo entry

The legacy attach used the "dummy" boardinfo entry to allow
matching a boardinfo to a pci card based on the "name" passed
by the comedi core. This driver now uses the PCI auto config
mechanism which always matches to the PCI vendor/device ids.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove unnecessary 'valid'

The 'valid' variable in the private data is only used in the
detach of the board to determine if the pci1710_reset() function
can be called. That function only requires a valid dev->iobase
to work. Use that for the check instead and remove the unneeded
variable from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove board attach noise

Remove the kernel message noise during the attach of the board.
Use a simple/clean dev_info at the end of the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: checkpatch cleanup: header tabs n spaces

Fix defines to comply with style guidelines

Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: minor cleanup: remove unused define

DEVICE_NODE not used

Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: checkpatch: cleanup macros

Fix msec_delay_bp macro formatting

Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci_dev_put()

This driver no longer walks the pci bus to find the pci_dev.
The pci_dev_put() is no longer needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove the function description comments

These comments are pretty obvious. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove devpriv macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it. The
boardinfo is also not needed now so remove it also.

This also allows removing the icp_multi.h header completely.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove board attach noise

Remove the kernel message noise during the attach of the board.
Use a simple/clean dev_info at the end of the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: the number of subdevices is fixed

This board always has 5 subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove have_irq from boardinfo

The board supported by this driver always supports interrupts.
Remove the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove iorange from boardinfo

This variable is not used in the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove cardtype from boardinfo

This variable is not used in the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove rangecode from boardinfo

The analog inputs and outputs for this driver use the same table
to set the analog range. Remove the boardinfo for it and just
reference the table directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove rangelist_ai from boardinfo

There is only one board type supported by this driver and the
analog input ranges are constant. Remove the boardinfo for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove ranglist_ao from boardinfo

This variable is not used by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove ai_maxdata from boardinfo

The analog inputs of this board always have 12-bit resolution.
Remove the boardinfo and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove ao_maxdata from boardinfo

The analog outputs of this board always have 12-bit resolution.
Remove the boardinfo and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_aichand from boardinfo

The analog inputs for this board always support differential
inputs and the number of channels is half the normal analog
input number.

Remove the n_aichand field from the boardinfo and fix the code
accordingly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_aichan from boardinfo

There is only one board type supported by this driver and the
number of analog input channels is constant. Remove the
boardinfo for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_aochan from boardinfo

There is only one board type supported by this driver and the
number of analog output channels is constant. Remove the
boardinfo for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_dichan from boardinfo

There is only one board type supported by this driver and the
number of digital input channels is constant. Remove the
boardinfo for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_dochan from boardinfo

There is only one board type supported by this driver and the
number of digital output channels is constant. Remove the
boardinfo for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove n_ctrs from boardinfo

There is only one board type supported by this driver and the
number of counter channels is constant. Remove the boardinfo
for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: remove ICP_MULTI_EXTDEBUG

This define enables a bunch of function trace messages. These
should be removed in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: convert to a pci_driver

This driver is for a PCI device not a legacy device.

Convert it from a module_comedi_driver to a module_comedi_pci_driver.
This will allow using the comedi_pci_auto_config mechanism to attach
to the device.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Store the irq holder in slot_irq.

This way we do no longer need to keep a dangling pointer to struct
ipack_device in tpci200_slot after the device has been removed.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: delete .remove_device() callback

As the IP module driver takes care of freeing its resources.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove tpci200_slot_unregister

It is not needed as the IP module should free its IRQ using
tpci200_free_irq callback.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: delete ipack_device_unregister calls when exiting

As the ipack_bus_unregister() takes care of unregistering the devices plugged
in the carrier, it is not needed to do it in the carrier driver.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: unregister devices when uninstall the carrier device.

Find the IP modules that are plugged to the carrier and unregister them.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: free the IRQ.

As the IRQ was requested by the driver, it should free it also.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: change exiting procedure

The ipoctal devices can be uninstalled from the ipack_driver_unregister()
call as the device model calles the bus's .remove() function for each device
registered by the driver and it will execute the .remove() function of the
ipoctal driver.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: fix the uninstall the ipack device

Using the call to the ipack_device_unregister() function to avoid the
strange way it was doing, as the device model will take care of calling
the bus's .remove function when a device is being unregistered.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: increment the reference counter of the pci_dev

As indicated in the documentation of pci_dev_get.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: reorder the iounmap and pci_release_region

Move iounmap and pci_release_region to tpci200_unregister(), as it is the place
where the clean-up of the device is done.

Also, renamed iounmap() to pci_iounmap() as the mapped region was requested
from PCI bus.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: check the device ID space CRC.

We check the CRC and store the result of the check in struct ipac_device.
A warning is emitted if the check fails.  However we leave it to the
IPack module device to refuse to initialize due to a bad CRC.  I have seen
otherwise good modules with bad CRCs.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: reset previous timeouts during device registration.

Resetting the previous timeout we avoid to read the timeout status register
and see timeout errors that don't correspond to the present state of the
device.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Switch to 8MHz operation before reading ID.

Reading the ID space at 8 MHz is always supported.  Most carriers will
boot up in 8MHz mode.  Still, play it safe and ensure we are operating at
8Mhz.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove struct list_head

As the linked list was removed before, delete the useless struct list_head

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: remove field driver from struct ipack_device.

After a successful match is found the driver field in struct device is
set by the core device code. We can use this field.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Choose the optimum bus speed by default.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Obtain supported speeds from ID ROM.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: provide new callbacks to tpci200

Provide get_clockrate, set_clockrate, get_error, get_timeout and reset_timeout
callbacks.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Provide several carrier callbacks.

We provide callbacks to:
 - set/get the clockrate a module is accessed at,
 - get the error state of a slot,
 - get/reset the timeout state of a slot.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Put the TPCI200 control registers into a struct.

This saves us from a little pointer arithmetic and cleans up the code a bit.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: improve conf data handling and initialization

While registering the thermal zone, it is required to have the cooling
devices already setup, so that the .bind callback can succeed.

Due to that, the driver code needs to be reorganized so that we first
setup the cooling devices then the zones. This way we cope with the
right thermal framework initialization sequence.

This patch changes the order of the thermal zone initialization,
so that we create it only when the cooling devices are available.
It also adds some defensive checks for the config data, so that
the callbacks are ready for calls when the data is still not
initialized.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: fix polling period settings

While registering the omap thermal zones we need to
properly specify TC1 and TC2, as long as the proper
passive polling period and monitor period.

This patch fixes the parameters passed while registering
the thermal zone.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove checkpatch.pl warnings on data files

Simple checkpatch.pl clean ups.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: Correct checkpatch.pl warnings

Removes checkpatch warnings on omap-bandgap.c.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix brace coding style issues

Fix coding style issues by removing unnecessary braces.

Signed-off-by: Güngör Erseymen <gelurine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove unnecessary comments

Remove some obvious comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove extra i8253_cascade_ns_to_timer_2div()

The comedi core always calls the 'do_cmdtest' function before it
calls the 'do_cmd' function. The 'do_cmdtest' for this driver calls
i8253_cascade_ns_to_timer_2div() to validate the cmd->convert_arg.
This call sets the dev_private 'div1' and 'div2' values needed to
program the 8254 timer. There is no need to call the i8253 function
a second time in the do_cmd function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use cfc_check_trigger_is_unique

Use the helper function cfc_check_trigger_is_unique.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fc: introduce cfc_check_trigger_is_unique

"Step 2" of each do_cmdtest checks that the trigger sources are
unique by doing something like this for each trigger:

if (cmd->start_src != TRIG_TIMER &&
    cmd->start_src != TRIG_FOLLOW &&
    cmd->start_src != TRIG_EXT)
err++;
/* Test the remaining triggers similarly */

if (err)
return 2;

Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:

err |= cfc_check_trigger_is_unique(cmd->start_src);
/* Test the remaining triggers similarly */

if (err)
return 2;

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: single source triggers are unique

If a single source trigger passes "step 1" of the do_cmdtest function
they are already unique. There is no need to recheck them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use cfc_check_trigger_src

Remove the pci9111_check_trigger_src macro and use the helper
function cfc_check_trigger_src instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fc: introduce cfc_check_trigger_src

All of the comedi drivers that support the 'cmd' callback also
require a 'do_cmdtest' callback. The do_cmdtest validates the
comedi_cmd before it is executed.

"Step 1" of each do_cmdtest does a trivial validation of the
trigger sources by doing something like this for each trigger:

int err = 0;
unsigned int tmp;

tmp = cmd->start_src;
src &= TRIG_NOW;
if (!src || tmp != src)
err++;
/* Test the remaining triggers similarly */

if (err)
return 1;

Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:

err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
/* Test the remaining triggers similarly */

if (err)
return 1;

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: remove camel-case vars in gdm_qos

Remove camel-case variables in gdm_qos.h and gdm_qos.c

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Prepare for irqs.h removal

Let's define some things locally to avoid breaking build
when irqs.h is removed.

This is needed for the ARM common zImage support.

Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "wlags49_h2" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove unnecessary 'is_valid'

The 'is_valid' variable in the private data is only used in the
detach of the board to determine if the pci9111_reset() function
can be called. That function only requires a valid dev->iobase
to work. Use that for the check instead and remove the unneeded
variable from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>