GitHub/LineageOS/android_kernel_samsung_universal7580.git
17 years ago[POWERPC] macintosh: Use common modalias generation for macio_sysfs
Sylvain Munaut [Sun, 6 May 2007 15:38:47 +0000 (01:38 +1000)]
[POWERPC] macintosh: Use common modalias generation for macio_sysfs

There is now a common function to generate the modalias string,
so use it. We just need to add the \n at the end.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Export of_device_get_modalias
Sylvain Munaut [Sun, 6 May 2007 15:38:46 +0000 (01:38 +1000)]
[POWERPC] Export of_device_get_modalias

Apparently other parts of the kernel need to know the
modalias internally (like the sysfs code in macintosh driver).

To avoid consistency issues, we export this code and use it
everywhere it's needed rather than repeat it ...

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Fix some missing build dependencies in arch/powerpc/boot
David Gibson [Fri, 4 May 2007 07:14:13 +0000 (17:14 +1000)]
[POWERPC] Fix some missing build dependencies in arch/powerpc/boot

This patch fixes a couple of missing dependencies in
arch/powerpc/boot/Makefile.  First, it ensures that the zlib.h header
is linked in before attempting to build gunzip_util.o, as it is,
building gunzip_util.o usually works, but not always depending on make
order.

Second, it makes the final images which are built using a dts
dependent on that dts, so the image will be correctly rebuilt if the
dts changes.  This in turn requires fixing the definition of the dts
variable.  CONFIG_DEVICE_TREE from Kconfig will have quotes around it,
which don't matter when passing the variable to a shell, but which
need to be removed when incorporating it into a filename for make's
use.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Kill off the PTE_FMT macro
David Gibson [Fri, 4 May 2007 06:47:51 +0000 (16:47 +1000)]
[POWERPC] Kill off the PTE_FMT macro

32-bit powerpc uses a PTE_FMT macro to handle printk() formatting of
PTE entries (which can vary in type and size).  Apparently there was a
good reason for it once, but with current compilers it's simpler just
to workaround the variation with a cast in the printk() itself
(there's only one use).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] pasemi: Update ppc_proc_freq from cpufreq driver
Olof Johansson [Fri, 4 May 2007 04:39:21 +0000 (14:39 +1000)]
[POWERPC] pasemi: Update ppc_proc_freq from cpufreq driver

Update the global cpu speed variable according to current cpufreq speed,
/proc/cpuinfo reports the actual speed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] powermac: Suspend to disk on G5
Johannes Berg [Thu, 3 May 2007 12:31:38 +0000 (22:31 +1000)]
[POWERPC] powermac: Suspend to disk on G5

Powermac G5 suspend to disk implementation.  The code is platform
agnostic but only tested on powermac, no other 64-bit powerpc
machines.

Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on
powermac and because I can't test it and some lowlevel code will need
changes it is BROKEN on all other 64-bit platforms.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] DART iommu suspend
Johannes Berg [Thu, 3 May 2007 12:28:32 +0000 (22:28 +1000)]
[POWERPC] DART iommu suspend

This implements save and restore hooks for IOMMUs and implements
it the DART iommu.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Rename device_is_compatible to of_device_is_compatible
Stephen Rothwell [Thu, 3 May 2007 07:26:52 +0000 (17:26 +1000)]
[POWERPC] Rename device_is_compatible to of_device_is_compatible

for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] powermac: Support G5 CPU hotplug
Johannes Berg [Wed, 2 May 2007 20:33:51 +0000 (06:33 +1000)]
[POWERPC] powermac: Support G5 CPU hotplug

This allows "hotplugging" of CPUs on G5 machines.  CPUs that are
disabled are put into an idle loop with the decrementer frequency set
to minimum.  To wake them up again we kick them just like when bringing
them up.  To stop those CPUs from messing with any global state we stop
them from entering the timer interrupt.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-empty
Scott Wood [Wed, 2 May 2007 18:00:00 +0000 (04:00 +1000)]
[POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-empty

This allows the zImage target to once again be used to build
all supported image types, rather than requiring an explicit
"make uImage" to avoid failing to create an unneeded cuImage.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Add smp_call_function_map and smp_call_function_single
will schmidt [Wed, 2 May 2007 17:12:34 +0000 (03:12 +1000)]
[POWERPC] Add smp_call_function_map and smp_call_function_single

Add a new function named smp_call_function_single().  This matches a generic
prototype from include/linux/smp.h.

Add a function smp_call_function_map().  This is, for the most part, a rename
of smp_call_function, with some added cpumask support.  smp_call_function and
smp_call_function_single call into smp_call_function_map.

Lightly tested on 970mp (blade), power4 and power5.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Change topology_init() to a subsys_initcall
Kevin Corry [Wed, 2 May 2007 17:11:49 +0000 (03:11 +1000)]
[POWERPC] Change topology_init() to a subsys_initcall

Change the powerpc version of topology_init() from an __initcall to
a subsys_initcall to match all other architectures.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] MPIC sys_device & suspend/resume
Johannes Berg [Wed, 2 May 2007 06:33:41 +0000 (16:33 +1000)]
[POWERPC] MPIC sys_device & suspend/resume

This adds mpic to the system devices and implements suspend
and resume for them.  This is necessary to get interrupts for
modules back to where they were before a suspend to disk.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] 64K page support for kexec
Luke Browning [Wed, 2 May 2007 14:19:11 +0000 (00:19 +1000)]
[POWERPC] 64K page support for kexec

This fixes a couple of kexec problems related to 64K page
support in the kernel.  kexec issues a tlbie for each pte.  The
parameters for the tlbie are the page size and the virtual address.
Support was missing for the computation of these two parameters
for 64K pages.  This adds that support.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Minor fault path optimization
Christoph Hellwig [Mon, 30 Apr 2007 10:56:46 +0000 (11:56 +0100)]
[POWERPC] Minor fault path optimization

Call the kprobes pagefault handler directly instead of going through
the complex notifier chain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Transparently handle <.symbol> lookup for kprobes
Srinivasa Ds [Mon, 23 Apr 2007 05:58:49 +0000 (11:28 +0530)]
[POWERPC] Transparently handle <.symbol> lookup for kprobes

When data symbols are not present in kernel image, user needs to add
dot(".") before function name explicitly, that he wants to probe in kprobe
module on ppc64.

for ex:-
When data symbols are missing on ppc64,
====================
[root@llm27lp1 ~]# cat /proc/kallsyms | grep do_fork
c00000000006283c T .do_fork
==============================
User needs add "." to "do_fork"

kp.symbol_name = ".do_fork";
============================

This makes kprobe modules unportable.  This fixes the problem.

Signed-off-by: Srinivasa Ds <srinivasa@in.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Remove duplicate export of __div64_32.
Scott Wood [Tue, 1 May 2007 16:05:38 +0000 (02:05 +1000)]
[POWERPC] Remove duplicate export of __div64_32.

Change 3927f2e8f9afa3424bb51ca81f7abac01ffd0005 moved lib/lib64.c from
lib-y to obj-y, preventing the export in ppc_ksyms.c from overriding
the one in lib, and thus causing a duplicate-export warning.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] pasemi: Only call of_platform_bus_probe() on relevant platforms
Olof Johansson [Tue, 1 May 2007 04:43:39 +0000 (14:43 +1000)]
[POWERPC] pasemi: Only call of_platform_bus_probe() on relevant platforms

Only publish of_platform devices if running on a machine that has them.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Rename get_property to of_get_property: drivers
Stephen Rothwell [Tue, 1 May 2007 03:54:02 +0000 (13:54 +1000)]
[POWERPC] Rename get_property to of_get_property: drivers

These are all the remaining instances of get_property.  Simple rename of
get_property to of_get_property.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] get_property returns const
Stephen Rothwell [Tue, 1 May 2007 03:51:32 +0000 (13:51 +1000)]
[POWERPC] get_property returns const

This is the last place that needs changing since get_property was changed
to return "const void *".

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Small cleanups to the cuboot bootwrapper code
David Gibson [Tue, 1 May 2007 00:20:20 +0000 (10:20 +1000)]
[POWERPC] Small cleanups to the cuboot bootwrapper code

This patch makes a few small cleanups to the cuboot code.
- It removes the double layered selection of images, via
cuboot-plat-y, instead having the cuboot platforms directly select a
suitable image-y (this changes the name of the final cuboot image from
plain cuImage to cuImage.<platform>).
- Factors out some code in the wrapper that's potentially
useful to platforms other than uboot.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] PS3: Defconfig updates
Geoff Levand [Mon, 30 Apr 2007 21:01:11 +0000 (07:01 +1000)]
[POWERPC] PS3: Defconfig updates

Updates to ps3_defconfig for linux-2.6.21.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] PS3: Fix system slowdown
Takao Shinohara [Mon, 30 Apr 2007 21:01:07 +0000 (07:01 +1000)]
[POWERPC] PS3: Fix system slowdown

The PS3 HV will deliver soft-disabled interrupts at the next HV call or
interrupt.  Add an HV call to local_irq_restore() to force the timely
delivery of any pending interrupts.

This fixes the system slowdown bug reported here
http://bugzilla.kernel.org/show_bug.cgi?id=8260

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] PS3: Interrupt routine fixups.
Geoff Levand [Mon, 30 Apr 2007 21:01:01 +0000 (07:01 +1000)]
[POWERPC] PS3: Interrupt routine fixups.

Fixups for the ps3 interrupt routines to support all HV device
in a generic way.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] PS3: Remove duplicate variable assignement
Geoff Levand [Mon, 30 Apr 2007 21:00:56 +0000 (07:00 +1000)]
[POWERPC] PS3: Remove duplicate variable assignement

A minor change to remove a duplicate variable assignement in ps3_mm_shutdown();

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] PS3: Add DABR support
Geoff Levand [Mon, 30 Apr 2007 21:00:50 +0000 (07:00 +1000)]
[POWERPC] PS3: Add DABR support

Add PS3 support for the PowerPC processor's Data Address Breakpoint Register
(DABR).

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Fix spurious vectors on weird MPIC
Josh Boyer [Mon, 30 Apr 2007 20:38:11 +0000 (06:38 +1000)]
[POWERPC] Fix spurious vectors on weird MPIC

The weird TSI 10x MPIC needs an EOI after getting a spurious vector.  This
patch uses the existing MPIC_SPV_EOI flag to fix this issue.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Use menuconfig objects II - Macintosh
Jan Engelhardt [Mon, 30 Apr 2007 11:37:55 +0000 (21:37 +1000)]
[POWERPC] Use menuconfig objects II - Macintosh

Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Fix suspend states again
Johannes Berg [Mon, 30 Apr 2007 11:37:15 +0000 (21:37 +1000)]
[POWERPC] Fix suspend states again

In commit 0fba3a1f39f8b0a50b56c8b068fa52131cbc84c2 (a very long time ago,
May 2006), I fixed a bug that caused powermacs to crash when you tried
entering standby/mem suspend states.

As I'm now getting more familiar with the suspend code I notice a few
more things:
 1. we previously misunderstood what pm_ops is for, it isn't supposed to be
    for doing platform dependent suspend/resume stuff that needs to be done
    for suspend to disk (as we currently try to use it!), it is instead for
    entering platform dependent suspend states ("standby", "mem").
 2. due to the first point, we never properly save FPU and altivec states
    when suspending to disk. It probably hasn't hurt yet because the process
    that writes the "disk" to /sys/power/state uses neither and its context
    is used.

This patch addresses these points as follows:
 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently
    usable via /sys/power/state but is done via the PMU instead.
 2. move the code responsible for storing FPU/altivec state into
    save_processor_state and the set_context() call to restore_processor_state.
 3. add a call to kernel_enable_spe()

It may look like there is some code removal missing but that is
actually because the new suspend.h file overrides the ppc/suspend.h
one which was previously used.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Remove arch/powerpc's dependence on asm-ppc/pg{alloc,table}.h
David Gibson [Mon, 30 Apr 2007 06:30:56 +0000 (16:30 +1000)]
[POWERPC] Remove arch/powerpc's dependence on asm-ppc/pg{alloc,table}.h

Currently, all 32-bit powerpc platforms use asm-ppc/pgtable.h and
asm-ppc/pgalloc.h, even when otherwise compiled with ARCH=powerpc.
Those asm-ppc files are a fairly nasty tangle of #ifdefs including a
bunch of things which shouldn't be necessary any more in arch/powerpc.

Cleaning up that mess is going to take a while, but this patch is a
first step.  It separates the asm-powerpc/pg{alloc,table}.h into 64
bit and 32 bit versions in asm-powerpc, which the basic .h files in
asm-powerpc select based on config.  We make a few tiny tweaks to the
innards of the files along the way, making the outermost ifdefs
(double-inclusion protection and __KERNEL__) a little cleaner, and
#including asm-generic/pgtable.h from the top-level
asm-powerpc/pgtable.h (since both the old 32-bit and 64-bit versions
ended with such an #include).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Fix STRICT_MM_TYPECHECKS
David Gibson [Mon, 30 Apr 2007 05:37:06 +0000 (15:37 +1000)]
[POWERPC] Fix STRICT_MM_TYPECHECKS

Since we don't have it active by default, the STRICT_MM_TYPECHECKS
option has bitrotted again.  This patch fixes a couple of simple build
fixes if the option is selected.  First, pud_t mustn't be defined in
page.h on 32-bit systems, because it conflicts with the version in the
generic pud-folding code.  Second, pci_32.c is missing a __pgprot()
wrapper call.  Third, a couple of PS3 files use constants of type
pgprot_t when they need the raw values, we add pgprot_val() calls to
fix this.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Revise PPC44x MMU code for arch/powerpc
David Gibson [Mon, 30 Apr 2007 04:06:25 +0000 (14:06 +1000)]
[POWERPC] Revise PPC44x MMU code for arch/powerpc

This patch takes the definitions for the PPC44x MMU (a software loaded
TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary
in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file.  It
also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a
couple of small fixes necessary for the 44x MMU code to build and work
properly in arch/powerpc.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Uninline of_iomap function
Christian Krafft [Tue, 24 Apr 2007 15:32:02 +0000 (01:32 +1000)]
[POWERPC] Uninline of_iomap function

There is no big reason to have that function inlined.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Initialise spinlock in the DEBUG_PAGEALLOC code
Michael Ellerman [Wed, 18 Apr 2007 01:50:09 +0000 (11:50 +1000)]
[POWERPC] Initialise spinlock in the DEBUG_PAGEALLOC code

Fixes:

BUG: spinlock bad magic on CPU#0, swapper/0
 lock: c00000000064ec30, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Call Trace:
[c00000000062b980] [c00000000000f920] .show_stack+0x6c/0x1a0 (unreliable)
[c00000000062ba20] [c0000000001c2b40] .spin_bug+0xb0/0xd4
[c00000000062bab0] [c0000000001c2ed0] ._raw_spin_lock+0x44/0x184
[c00000000062bb50] [c0000000003a42b4] ._spin_lock+0x10/0x24
[c00000000062bbd0] [c00000000002b4dc] .kernel_map_pages+0x198/0x278
[c00000000062bc90] [c000000000079720] .free_hot_cold_page+0x124/0x418
[c00000000062bd70] [c000000000530278] .free_all_bootmem_core+0x14c/0x224
[c00000000062be50] [c00000000052a178] .mem_init+0x68/0x170
[c00000000062bee0] [c00000000051d874] .start_kernel+0x2a0/0x37c
[c00000000062bf90] [c0000000000084c8] .start_here_common+0x54/0x8c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Turn on corresponding PHY drivers in QE UEC platforms defconfigs
Kim Phillips [Tue, 10 Apr 2007 21:56:53 +0000 (07:56 +1000)]
[POWERPC] Turn on corresponding PHY drivers in QE UEC platforms defconfigs

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC
Kim Phillips [Tue, 10 Apr 2007 21:56:49 +0000 (07:56 +1000)]
[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC

Add 'mdio' to bus scan id list for platforms with QE UEC
as a consequence of converting UEC mdio driver to an
of_platform driver in the ucc_geth phylib conversion patch.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Replace undocumented interface properties in dts files
Kim Phillips [Mon, 23 Apr 2007 21:26:14 +0000 (07:26 +1000)]
[POWERPC] Replace undocumented interface properties in dts files

phy-connection-type now supersedes the interface property.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Document phy-connection-type property
Kim Phillips [Mon, 23 Apr 2007 21:26:10 +0000 (07:26 +1000)]
[POWERPC] Document phy-connection-type property

Since ucc_geth is being migrated to use the phylib, the existing
(undocumented) 'interface' property is being deprecated in favour
of 'phy-connection-type'.

phy-connection-type is now maintained one-to-one with definitions
in include/linux/phy.h, albeit in the form of a string.
If not specified, "mii" is assumed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] pseries: Handle null iommu dma-window property correctly
Linas Vepstas [Tue, 10 Apr 2007 20:11:23 +0000 (06:11 +1000)]
[POWERPC] pseries: Handle null iommu dma-window property correctly

Some versions of pSeries firmware fail to set up a
dma-window property for PCI slots that are unoccupied.
As a result, the loop searching for this propery, in
pci_dma_dev_setup_pSeriesLP(), can run to the end, resulting
in a NULL pointer dereference later in the routine. This
patch prevents the crash, and prints a warning message.

This is theoretically a rare error, as it occurs on what
is hopefully just beta levels of firmware. But just in case
this firmware escapes into the wild, this patch will avoid
the crash.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
17 years ago[POWERPC] powermac: Fix G5-cpufreq for cpu on/offline
Johannes Berg [Wed, 21 Mar 2007 10:40:42 +0000 (21:40 +1100)]
[POWERPC] powermac: Fix G5-cpufreq for cpu on/offline

The original code here is wrong, it applies "previous" knowledge.
The way the cpufreq core is designed is that the policy for the
secondary CPU that comes online says that it must in fact not
use this policy but use the same as the other CPUs that are
listed, which in fact is CPU#0.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] apm_emu: Use generic apm-emulation
Johannes Berg [Mon, 19 Mar 2007 18:18:02 +0000 (05:18 +1100)]
[POWERPC] apm_emu: Use generic apm-emulation

This patch removes a huge amount of code that is now in common code
in drivers/char/apm-emulation.c

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platforms
Zang Roy-r61911 [Wed, 14 Mar 2007 23:37:56 +0000 (10:37 +1100)]
[POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platforms

Remove loops_per_jiffy early initialization code for 7448HPC2 platforms.
Since udelay no longer uses loops_per_jiffy it is not necessary to
initialize it early.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] drivers/macintosh/mac_hid.c: Make code static
Adrian Bunk [Wed, 7 Mar 2007 22:41:07 +0000 (09:41 +1100)]
[POWERPC] drivers/macintosh/mac_hid.c: Make code static

This patch makes some needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Remove unneeded page_is_ram export
Johannes Berg [Thu, 8 Feb 2007 13:27:44 +0000 (00:27 +1100)]
[POWERPC] Remove unneeded page_is_ram export

arch/powerpc/mm/mem.c exports page_is_ram, which is not used anywhere
that could be modular.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Move of_irq_to_resource from prom.h to prom_parse.c
Mathieu Desnoyers [Tue, 6 Feb 2007 01:03:31 +0000 (12:03 +1100)]
[POWERPC] Move of_irq_to_resource from prom.h to prom_parse.c

In the powerpc architecture, of_irq_to_resource, currently sitting in
prom.h, needs irq_of_parse_and_map and NO_IRQ from asm-powerpc/irq.h.
The solution suggested by Benjamin Herrenschmidt is to move it to
arch/powerpc/kernel/prom_parse.c.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] pmac_feature_call checks platform
Benjamin Herrenschmidt [Wed, 1 Nov 2006 04:53:00 +0000 (15:53 +1100)]
[POWERPC] pmac_feature_call checks platform

This patch makes sure that a caller of pmac_call_feature() won't try
to call into ppc_md.feature_call of another platform, which might
happen if some powermac drivers are loaded on non-powermac machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years agolibata: honour host controllers that want just one host
Linus Torvalds [Tue, 1 May 2007 00:43:48 +0000 (17:43 -0700)]
libata: honour host controllers that want just one host

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm: include EIO from errno-base.h
David Rientjes [Mon, 30 Apr 2007 22:09:56 +0000 (15:09 -0700)]
pm: include EIO from errno-base.h

For backwards compatibility, call_platform_enable_wakeup() can return 0
instead of -EIO since we aren't guaranteed to have errno defined.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoAdd kvasprintf()
Jeremy Fitzhardinge [Mon, 30 Apr 2007 22:09:56 +0000 (15:09 -0700)]
Add kvasprintf()

Add a kvasprintf() function to complement kasprintf().

No in-tree users yet, but I have some coming up.

[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: force pm_ops.valid callback to be assigned
Johannes Berg [Mon, 30 Apr 2007 22:09:55 +0000 (15:09 -0700)]
power management: force pm_ops.valid callback to be assigned

This patch changes the docs and behaviour from "all states valid" to "no
states valid" if no .valid callback is assigned.  Users of pm_ops that only
need mem sleep can assign pm_valid_only_mem without any overhead, others
will require more elaborate callbacks.

Now that all users of pm_ops have a .valid callback this is a safe thing to
do and prevents things from getting messy again as they were before.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: implement pm_ops.valid for everybody
Johannes Berg [Mon, 30 Apr 2007 22:09:54 +0000 (15:09 -0700)]
power management: implement pm_ops.valid for everybody

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: remove firmware disk mode
Johannes Berg [Mon, 30 Apr 2007 22:09:53 +0000 (15:09 -0700)]
power management: remove firmware disk mode

This patch removes the firmware disk suspend mode which is the wrong approach,
it is supposed to be used for implementing firmware-based disk suspend but
cannot actually be used for that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agorework pm_ops pm_disk_mode, kill misuse
Johannes Berg [Mon, 30 Apr 2007 22:09:51 +0000 (15:09 -0700)]
rework pm_ops pm_disk_mode, kill misuse

This patch series cleans up some misconceptions about pm_ops.  Some users of
the pm_ops structure attempt to use it to stop the user from entering suspend
to disk, this, however, is not possible since the user can always use
"shutdown" in /sys/power/disk and then the pm_ops are never invoked.  Also,
platforms that don't support suspend to disk simply should not allow
configuring SOFTWARE_SUSPEND (read the help text on it, it only selects
suspend to disk and nothing else, all the other stuff depends on PM).

The pm_ops structure is actually intended to provide a way to enter
platform-defined sleep states (currently supported states are "standby" and
"mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured)
allows a platform to support a platform specific way to enter low-power mode
once everything has been saved to disk.  This is currently only used by ACPI
(S4).

This patch:

The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really
seems to understand what it actually does.

This patch clarifies the pm_disk_mode description.

It also removes all the arm and sh users that think they can veto suspend to
disk via pm_ops; not so since the user can always do echo shutdown >
/sys/power/disk, they need to find a better way involving Kconfig or such.

ACPI is the only user left with a non-zero pm_disk_mode.

The patch also sets the default mode to shutdown again, but when a new pm_ops
is registered its pm_disk_mode is selected as default, that way the default
stays for ACPI where it is apparently required.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoreiserfs: suppress lockdep warning
Jeff Mahoney [Mon, 30 Apr 2007 22:09:50 +0000 (15:09 -0700)]
reiserfs: suppress lockdep warning

We're getting lockdep warnings due to a post-2.6.21-rc7 bugfix.

The xattr_sem can never be taken in the manner described. Internal inodes
are protected by I_PRIVATE.  Add the appropriate annotation.

Cc: <stable@kernel.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoExtend print_symbol capability
Robert Peterson [Mon, 30 Apr 2007 22:09:48 +0000 (15:09 -0700)]
Extend print_symbol capability

Today's print_symbol function dumps a kernel symbol with printk.  This
patch extends the functionality of kallsyms.c so that the symbol lookup
function may be used without the printk.  This is useful for modules that
want to dump symbols elsewhere, for example, to debugfs.  I intend to use
the new function call in the GFS2 file system (which will be a separate
patch).

[akpm@linux-foundation.org: build fix]
[clameter@sgi.com: sprint_symbol should return length of string like sprintf]
Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[UDP]: Do not allow specific bind when wildcard bind exists.
David S. Miller [Mon, 30 Apr 2007 21:51:58 +0000 (14:51 -0700)]
[UDP]: Do not allow specific bind when wildcard bind exists.

When allocating local ports, do not allow a bind to a port
with a specific local address when a bind to that port with
a wildcard local address already exists.

Noticed by Linus.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] UDP: Fix endianness bugs in hashing changes.
David S. Miller [Mon, 30 Apr 2007 20:35:29 +0000 (13:35 -0700)]
[IPV4] UDP: Fix endianness bugs in hashing changes.

I accidently applied an earlier version of Eric Dumazet's patch, from
March 21st.  His version from March 30th didn't have these bugs, so
this just interdiffs to the correct patch.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Mon, 30 Apr 2007 15:59:57 +0000 (08:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (56 commits)
  ieee1394: remove garbage from Kconfig
  ieee1394: more help in Kconfig
  ieee1394: ohci1394: Fix mistake in printk message.
  ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
  ieee1394: ohci1394: fix cosmetic problem in error logging
  ieee1394: eth1394: send async streams at S100 on 1394b buses
  ieee1394: eth1394: fix error path in module_init
  ieee1394: eth1394: correct return codes in hard_start_xmit
  ieee1394: eth1394: hard_start_xmit is called in atomic context
  ieee1394: eth1394: some conditions are unlikely
  ieee1394: eth1394: clean up fragment_overlap
  ieee1394: eth1394: don't use alloc_etherdev
  ieee1394: eth1394: omit useless set_mac_address callback
  ieee1394: eth1394: CONFIG_INET is always defined
  ieee1394: eth1394: allow MTU bigger than 1500
  ieee1394: unexport highlevel_host_reset
  ieee1394: eth1394: contain host reset
  ieee1394: eth1394: shorter error messages
  ieee1394: eth1394: correct a memset argument
  ieee1394: eth1394: refactor .probe and .update
  ...

17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 30 Apr 2007 15:58:21 +0000 (08:58 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  USB HID: don't warn on idVendor == 0
  USB HID: add 'quirks' module parameter
  USB HID: add support for dynamically-created quirks
  USB HID: clarify static quirk handling as squirks
  USB HID: encapsulate quirk handling into hid-quirks.c
  USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
  HID: update copyright and authorship macro
  HID: introduce proper zeroing of unused bits in output reports
  USB HID: add support for WiseGroup MP-8800 Quad Joypad
  USB HID: add FF support for Logitech Force 3D Pro Joystick
  USB HID: numlock quirk for dell W7658 keyboard
  USB HID: Logitech MX3000 keyboard needs report descriptor quirk
  USB HID: extend quirk for Logitech S510 keyboard
  USB HID: usbkbd/usbmouse - handle errors when registering devices
  USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
  HID: enable dead keys on a belkin wireless keyboard
  USB HID: Thustmaster firestorm dual power v1 support
  USB HID: specify explicit size for hid_blacklist.quirks
  USB HID: fix retry & reset logic
  USB HID: consolidate vendor/product ids
  ...

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 30 Apr 2007 15:14:42 +0000 (08:14 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
  [IPV4] SNMP: Support InMcastPkts and InBcastPkts
  [IPV4] SNMP: Support InTruncatedPkts
  [IPV4] SNMP: Support InNoRoutes
  [SNMP]: Add definitions for {In,Out}BcastPkts
  [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
  [TCP] FRTO: Delay skb available check until it's mandatory
  [XFRM]: Restrict upper layer information by bundle.
  [TCP]: Catch skb with S+L bugs earlier
  [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
  [L2TP]: Add the ability to autoload a pppox protocol module.
  [SKB]: Introduce skb_queue_walk_safe()
  [AF_IUCV/IUCV]: smp_call_function deadlock
  [IPV6]: Fix slab corruption running ip6sic
  [TCP]: Update references in two old comments
  [XFRM]: Export SPD info
  [IPV6]: Track device renames in snmp6.
  [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage.
  [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.
  [NETPOLL]: Remove CONFIG_NETPOLL_RX
  ...

17 years agoMerge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Mon, 30 Apr 2007 15:12:39 +0000 (08:12 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] elevator: elv_list_lock does not need irq disabling
  [BLOCK] Don't pin lots of memory in mempools
  cfq-iosched: speedup cic rb lookup
  ll_rw_blk: add io_context private pointer
  cfq-iosched: get rid of cfqq hash
  cfq-iosched: tighten queue request overlap condition
  cfq-iosched: improve sync vs async workloads
  cfq-iosched: never allow an async queue idling
  cfq-iosched: get rid of ->dispatch_slice
  cfq-iosched: don't pass unused preemption variable around
  cfq-iosched: get rid of ->cur_rr and ->cfq_list
  cfq-iosched: slice offset should take ioprio into account
  [PATCH] cfq-iosched: style cleanups and comments
  cfq-iosched: sort IDLE queues into the rbtree
  cfq-iosched: sort RT queues into the rbtree
  [PATCH] cfq-iosched: speed up rbtree handling
  cfq-iosched: rework the whole round-robin list concept
  cfq-iosched: minor updates
  cfq-iosched: development update
  cfq-iosched: improve preemption for cooperating tasks

17 years agoMerge branch 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus...
Linus Torvalds [Mon, 30 Apr 2007 15:10:12 +0000 (08:10 -0700)]
Merge branch 'for-2.6.22' of git://git./linux/kernel/git/paulus/powerpc

* 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)
  [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
  [POWERPC] remove kernel module option for booke wdt
  [POWERPC] Avoid putting cpu node twice
  [POWERPC] Spinlock initializer cleanup
  [POWERPC] ppc4xx_sgdma needs dma-mapping.h
  [POWERPC] arch/powerpc/sysdev/timer.c build fix
  [POWERPC] get_property cleanups
  [POWERPC] Remove the unused HTDMSOUND driver
  [POWERPC] cell: cbe_cpufreq cleanup and crash fix
  [POWERPC] Declare enable_kernel_spe in a header
  [POWERPC] Add dt_xlate_addr() to bootwrapper
  [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
  [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.
  [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files
  [POWERPC] Add uartlite boot console driver for the zImage wrapper
  [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
  [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices
  [POWERPC] Merge common virtex header files
  [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform
  [POWERPC] Clean up cpufreq Kconfig dependencies
  ...

17 years ago[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:20 +0000 (00:48 -0700)]
[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts

A transmitted IP multicast datagram should be counted as OutMcastPkts.
By the same token, a transmitted IP broadcast datagram should be
counted as OutBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InMcastPkts and InBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:10 +0000 (00:48 -0700)]
[IPV4] SNMP: Support InMcastPkts and InBcastPkts

A received IP multicast datagram should be counted as InMcastPkts.
By the same token, a received IP broadcast datagram should be
counted as InBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InTruncatedPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:46:30 +0000 (00:46 -0700)]
[IPV4] SNMP: Support InTruncatedPkts

An IP datagram which is being discarded because the datagram frame
didn't carry enough data should be counted as InTruncatedPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InNoRoutes
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:49 +0000 (00:45 -0700)]
[IPV4] SNMP: Support InNoRoutes

An IP datagram which is being discarded because of no routes in the
forwarding path should be counted as InNoRoutes.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SNMP]: Add definitions for {In,Out}BcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:02 +0000 (00:45 -0700)]
[SNMP]: Add definitions for {In,Out}BcastPkts

The updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts
and OutBcastPkts. This adds definitions for them.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
Ilpo Järvinen [Mon, 30 Apr 2007 07:42:20 +0000 (00:42 -0700)]
[TCP] FRTO: RFC4138 allows Nagle override when new data must be sent

This is a corner case where less than MSS sized new data thingie
is awaiting in the send queue. For F-RTO to work correctly, a
new data segment must be sent at certain point or F-RTO cannot
be used at all. RFC4138 allows overriding of Nagle at that
point.

Implementation uses frto_counter states 2 and 3 to distinguish
when Nagle override is needed.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: Delay skb available check until it's mandatory
Ilpo Järvinen [Mon, 30 Apr 2007 07:39:55 +0000 (00:39 -0700)]
[TCP] FRTO: Delay skb available check until it's mandatory

No new data is needed until the first ACK comes, so no need to check
for application limitedness until then.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[XFRM]: Restrict upper layer information by bundle.
Masahide NAKAMURA [Mon, 30 Apr 2007 07:33:35 +0000 (00:33 -0700)]
[XFRM]: Restrict upper layer information by bundle.

On MIPv6 usage, XFRM sub policy is enabled.
When main (IPsec) and sub (MIPv6) policy selectors have the same
address set but different upper layer information (i.e. protocol
number and its ports or type/code), multiple bundle should be created.
However, currently we have issue to use the same bundle created for
the first time with all flows covered by the case.

It is useful for the bundle to have the upper layer information
to be restructured correctly if it does not match with the flow.

1. Bundle was created by two policies
Selector from another policy is added to xfrm_dst.
If the flow does not match the selector, it goes to slow path to
restructure new bundle by single policy.

2. Bundle was created by one policy
Flow cache is added to xfrm_dst as originated one. If the flow does
not match the cache, it goes to slow path to try searching another
policy.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Catch skb with S+L bugs earlier
Ilpo Järvinen [Mon, 30 Apr 2007 07:57:33 +0000 (00:57 -0700)]
[TCP]: Catch skb with S+L bugs earlier

SACKED_ACKED and LOST are mutually exclusive with SACK, thus
having their sum larger than packets_out is bug with SACK.
Eventually these bugs trigger traps in the tcp_clean_rtx_queue
with SACK but it's much more informative to do this here.

Non-SACK TCP, however, could get more than packets_out duplicate
ACKs which each increment sacked_out, so it makes sense to do
this kind of limitting for non-SACK TCP but not for SACK enabled
one. Perhaps the author had the opposite in mind but did the
logic accidently wrong way around? Anyway, the sacked_out
incrementer code for non-SACK already deals this issue before
calling sync_left_out so this trapping can be done
unconditionally.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
Eric Dumazet [Mon, 30 Apr 2007 07:26:00 +0000 (00:26 -0700)]
[PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo

Some people want to have many UDP sockets, binded to a single port but
many different addresses. We currently hash all those sockets into a
single chain.  Processing of incoming packets is very expensive,
because the whole chain must be examined to find the best match.

I chose in this patch to hash UDP sockets with a hash function that
take into account both their port number and address : This has a
drawback because we need two lookups : one with a given address, one
with a wildcard (null) address.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[L2TP]: Add the ability to autoload a pppox protocol module.
James Chapman [Mon, 30 Apr 2007 07:21:02 +0000 (00:21 -0700)]
[L2TP]: Add the ability to autoload a pppox protocol module.

This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf
to autoload a PPPoX protocol nnn.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge branch 'cfq' into for-linus
Jens Axboe [Mon, 30 Apr 2007 07:09:27 +0000 (09:09 +0200)]
Merge branch 'cfq' into for-linus

17 years ago[PATCH] elevator: elv_list_lock does not need irq disabling
Jens Axboe [Thu, 26 Apr 2007 12:41:53 +0000 (14:41 +0200)]
[PATCH] elevator: elv_list_lock does not need irq disabling

It's never grabbed from irq context, so just make it plain spin_lock().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[BLOCK] Don't pin lots of memory in mempools
Jens Axboe [Mon, 2 Apr 2007 08:06:42 +0000 (10:06 +0200)]
[BLOCK] Don't pin lots of memory in mempools

Currently we scale the mempool sizes depending on memory installed
in the machine, except for the bio pool itself which sits at a fixed
256 entry pre-allocation.

There's really no point in "optimizing" this OOM path, we just need
enough preallocated to make progress. A single unit is enough, lets
scale it down to 2 just to be on the safe side.

This patch saves ~150kb of pinned kernel memory on a 32-bit box.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[SKB]: Introduce skb_queue_walk_safe()
James Chapman [Mon, 30 Apr 2007 07:07:31 +0000 (00:07 -0700)]
[SKB]: Introduce skb_queue_walk_safe()

This patch provides a method for walking skb lists while inserting or
removing skbs from the list.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agocfq-iosched: speedup cic rb lookup
Jens Axboe [Tue, 24 Apr 2007 19:23:53 +0000 (21:23 +0200)]
cfq-iosched: speedup cic rb lookup

We often lookup the same queue many times in succession, so cache
the last looked up queue to avoid browsing the rbtree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agoll_rw_blk: add io_context private pointer
Jens Axboe [Tue, 24 Apr 2007 19:17:33 +0000 (21:17 +0200)]
ll_rw_blk: add io_context private pointer

To be used by as/cfq as they see fit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of cfqq hash
Vasily Tarasov [Wed, 25 Apr 2007 10:29:51 +0000 (12:29 +0200)]
cfq-iosched: get rid of cfqq hash

cfq hash is no more necessary.  We always can get cfqq from io context.
cfq_get_io_context_noalloc() function is introduced, because we don't
want to allocate cic on merging and checking may_queue.  In order to
identify sync queue we've used hash key = CFQ_KEY_ASYNC. Since hash is
eliminated we need to use other criterion: sync flag for queue is added.
In all places where we dig in rb_tree we're in current context, so no
additional locking is required.

Advantages of this patch: no additional memory for hash, no seeking in
hash, code is cleaner. But it is necessary now to seek cic in per-ioc
rbtree, but it is faster:
- most processes work only with few devices
- most systems have only few block devices
- it is a rb-tree

Signed-off-by: Vasily Tarasov <vtaras@openvz.org>
Changes by me:

- Merge into CFQ devel branch
- Get rid of cfq_get_io_context_noalloc()
- Fix various bugs with dereferencing cic->cfqq[] with offset other
  than 0 or 1.
- Fix bug in cfqq setup, is_sync condition was reversed.
- Fix bug where only bio_sync() is used, we need to check for a READ too

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: tighten queue request overlap condition
Jens Axboe [Fri, 20 Apr 2007 18:45:39 +0000 (20:45 +0200)]
cfq-iosched: tighten queue request overlap condition

For tagged devices, allow overlap of requests if the idle window
isn't enabled on the current active queue.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: improve sync vs async workloads
Jens Axboe [Mon, 23 Apr 2007 06:33:33 +0000 (08:33 +0200)]
cfq-iosched: improve sync vs async workloads

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: never allow an async queue idling
Jens Axboe [Thu, 19 Apr 2007 12:32:26 +0000 (14:32 +0200)]
cfq-iosched: never allow an async queue idling

We don't enable it by default, don't let it get enabled during
runtime.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of ->dispatch_slice
Jens Axboe [Mon, 23 Apr 2007 06:26:36 +0000 (08:26 +0200)]
cfq-iosched: get rid of ->dispatch_slice

We can track it fairly accurately locally, let the slice handling
take care of the rest.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: don't pass unused preemption variable around
Jens Axboe [Mon, 23 Apr 2007 06:25:00 +0000 (08:25 +0200)]
cfq-iosched: don't pass unused preemption variable around

We don't use it anymore in the slice expiry handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of ->cur_rr and ->cfq_list
Jens Axboe [Thu, 19 Apr 2007 10:03:34 +0000 (12:03 +0200)]
cfq-iosched: get rid of ->cur_rr and ->cfq_list

It's only used for preemption now that the IDLE and RT queues also
use the rbtree. If we pass an 'add_front' variable to
cfq_service_tree_add(), we can set ->rb_key to 0 to force insertion
at the front of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: slice offset should take ioprio into account
Jens Axboe [Fri, 20 Apr 2007 12:18:00 +0000 (14:18 +0200)]
cfq-iosched: slice offset should take ioprio into account

Use the max_slice-cur_slice as the multipler for the insertion offset.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] cfq-iosched: style cleanups and comments
Jens Axboe [Thu, 26 Apr 2007 10:54:48 +0000 (12:54 +0200)]
[PATCH] cfq-iosched: style cleanups and comments

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: sort IDLE queues into the rbtree
Jens Axboe [Wed, 18 Apr 2007 18:13:32 +0000 (20:13 +0200)]
cfq-iosched: sort IDLE queues into the rbtree

Same treatment as the RT conversion, just put the sorted idle
branch at the end of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: sort RT queues into the rbtree
Jens Axboe [Wed, 18 Apr 2007 18:01:57 +0000 (20:01 +0200)]
cfq-iosched: sort RT queues into the rbtree

Currently CFQ does a linked insert into the current list for RT
queues. We can just factor the class into the rb insertion,
and then we don't have to treat RT queues in a special way. It's
faster, too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] cfq-iosched: speed up rbtree handling
Jens Axboe [Thu, 26 Apr 2007 10:53:50 +0000 (12:53 +0200)]
[PATCH] cfq-iosched: speed up rbtree handling

For cases where the rbtree is mainly used for sorting and min retrieval,
a nice speedup of the rbtree code is to maintain a cache of the leftmost
node in the tree.

Also spotted in the CFS CPU scheduler code.

Improved by Alan D. Brunelle <Alan.Brunelle@hp.com> by updating the
leftmost hint in cfq_rb_first() if it isn't set, instead of only
updating it on insert.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: rework the whole round-robin list concept
Jens Axboe [Fri, 20 Apr 2007 12:27:50 +0000 (14:27 +0200)]
cfq-iosched: rework the whole round-robin list concept

Drawing on some inspiration from the CFS CPU scheduler design, overhaul
the pending cfq_queue concept list management. Currently CFQ uses a
doubly linked list per priority level for sorting and service uses.
Kill those lists and maintain an rbtree of cfq_queue's, sorted by when
to service them.

This unfortunately means that the ionice levels aren't as strong
anymore, will work on improving those later. We only scale the slice
time now, not the number of times we service. This means that latency
is better (for all priority levels), but that the distinction between
the highest and lower levels aren't as big.

The diffstat speaks for itself.

 cfq-iosched.c |  363 +++++++++++++++++---------------------------------
 1 file changed, 125 insertions(+), 238 deletions(-)

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: minor updates
Jens Axboe [Tue, 17 Apr 2007 10:47:55 +0000 (12:47 +0200)]
cfq-iosched: minor updates

- Move the queue_new flag clear to when the queue is selected
- Only select the non-first queue in cfq_get_best_queue(), if there's
  a substantial difference between the best and first.
- Get rid of ->busy_rr
- Only select a close cooperator, if the current queue is known to take
  a while to "think".

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: development update
Jens Axboe [Wed, 25 Apr 2007 10:44:27 +0000 (12:44 +0200)]
cfq-iosched: development update

- Implement logic for detecting cooperating processes, so we
  choose the best available queue whenever possible.

- Improve residual slice time accounting.

- Remove dead code: we no longer see async requests coming in on
  sync queues. That part was removed a long time ago. That means
  that we can also remove the difference between cfq_cfqq_sync()
  and cfq_cfqq_class_sync(), they are now indentical. And we can
  kill the on_dispatch array, just make it a counter.

- Allow a process to go into the current list, if it hasn't been
  serviced in this scheduler tick yet.

Possible future improvements including caching the cfqq lookup
in cfq_close_cooperator(), so we don't have to look it up twice.
cfq_get_best_queue() should just use that last decision instead
of doing it again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: improve preemption for cooperating tasks
Jens Axboe [Wed, 14 Feb 2007 18:59:49 +0000 (19:59 +0100)]
cfq-iosched: improve preemption for cooperating tasks

When testing the syslet async io approach, I discovered that CFQ
sometimes didn't perform as well as expected. cfq_should_preempt()
needs to better check for cooperating tasks, so fix that by allowing
preemption of an equal priority queue if the recently queued request
is as good a candidate for IO as the one we are currently waiting for.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
Paul Mackerras [Mon, 30 Apr 2007 03:03:39 +0000 (13:03 +1000)]
[POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c

Commit 404d5b185b4eb56d6fa2f7bd27833f8df1c38ce4 changed the definition
of dev_dbg in the !DEBUG case from being a #define to being a static
inline.  There was code in drivers/ps3/vuart.c to do exactly that,
which fails to compile now.  This fixes it by removing the redefinition,
as the redefinition is now superfluous.

Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years agoMerge branch 'linux-2.6' into for-2.6.22
Paul Mackerras [Mon, 30 Apr 2007 02:38:01 +0000 (12:38 +1000)]
Merge branch 'linux-2.6' into for-2.6.22

17 years ago[POWERPC] remove kernel module option for booke wdt
Dave Jiang [Fri, 13 Apr 2007 22:25:24 +0000 (08:25 +1000)]
[POWERPC] remove kernel module option for booke wdt

Remove option of making booke_wdt into a kernel module. This watchdog
cannot be disabled. No point being a kernel module.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Avoid putting cpu node twice
John Rigby [Fri, 6 Apr 2007 22:57:37 +0000 (08:57 +1000)]
[POWERPC] Avoid putting cpu node twice

Call of_find_node_by_type with NULL instead of np
so the cpu node does not get put twice.
This was causing kref_put warnings.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Spinlock initializer cleanup
Thomas Gleixner [Sun, 29 Apr 2007 16:10:39 +0000 (16:10 +0000)]
[POWERPC] Spinlock initializer cleanup

Use DEFINE_SPINLOCK instead of initializing spinlocks to
SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>