Staging: rtl8723au: rtl8723a_rf6052: Remove unnecessary semicolon.

Remove unnecessary semicolon.

Coccinelle sementic patch as follows:
@r_case@
position p;
@@
switch (...)
{
case ...: ...;@p
}

@r_default@
position p;
@@
switch (...)
{
default: ...;@p
}

@r1@
statement S;
position p1;
position p != {r_case.p, r_default.p};
identifier label;
@@
(
label:;
|
S@p1;@p
)

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix line longer than 80 columns.

This patch fixes the checkpatch.pl warning:

WARNING: line over 80 characters

Signed-off-by: Edward Lipinsky <ellipinsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix typo in debug message

This fixes a mis-spelled word in a few debug statements.

Signed-off-by: Nik Nyby <nikolas@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove unnecessary semicolon.

Remove unnecessary semicolon.This issue is found by coccinelle script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: remove extra blank lines.

This patch removes blank lines in r8192U_wx.c that were flagged by
checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: netlogic: Remove & from function name.

Remove & from function name,when function name passed as an argument to another function.
Function name is used as pointer without &.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: use kernel preferred block commenting style

Use * on subsequent lines and trailing */ on a separate
line in block comments.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: o2iblnd: Use sizeof type *pointer instead of sizeof type.

Use sizeof type *pointer instead of sizeof type.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: rpc: Use sizeof type *pointer instead of sizeof type.

Use sizeof type *pointer instead of sizeof type.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: socklnd: Remove return statement from void function.

Remove return statement from void function.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: socklnd_lib: Remove return statement from void function.

Remove return statement from void function.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lib-move: Remove unnecessary space after cast.

Remove unnecessary space after cast.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i4l: pcbit: drv: Remove unnecessary semicolon.

Remove unnecessary semicolon.This issue is detected by coccinelle script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i4l: pcbit: capi: Add parentheses to complex macro.

Add parentheses to complex macro.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i4l: pcbit: drv: Do not initialise statics to 0.

Do not initialise statics to 0.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i4l: pcbit: edss1: Use !x instead of x == NULL.

Use !x instead of x == NULL.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i4l: pcbit: layer2: Add parentheses to complex macro.

Add  parentheses to complex macro.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fb_agm1264k-fl: No space is necessary after cast.

No space is necessary after cast.This problem is found  by checkpatch.pl script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fbtft-io: No space is necessary after cast.

No space is necessary after cast.This patch is found by checkpatch.pl script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fbtft_device: No space is necessary after cast.

No space is necessary after cast.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Match alignment with open parenthesis.

The following patch fixes the following checkpatch.pl warning:

CHECK: Alignment should match open parenthesis

Signed-off-by: Heena Sirwani <heenasirwani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: emxx_udc: emxx_udc: Add space around operator.

Add space around operator.This patch is found by checkpatch.pl script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: emxx_udc: Add space around '-'

Add space around operator '-'. Problem found using checkpatch.pl
CHECK: spaces preferred around that '-' (ctx:VxV)

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gs_fpgaboot: Replace 'int32_t' with 'int'.

Replace 'int32_t' with 'int'.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gs_fpgaboot: Add space around '+'.

Add space around '+'.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gs_fpgaboot: Remove unnecessary blank lines.

Remove unnecessary blank lines.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gs_fpgaboot: Fix alignment to match open parenthesis.

Fix alignment to match open parenthesis.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5208: Add space around '+'

Add space around operator '+'. Problem found using checkpatch.pl
CHECK: spaces preferred around that '+' (ctx:VxV)

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: threefish_block: Use ror64

Use the inline instead of direct code to improve readability
and shorten the code a little.

Done with perl:

$ perl -p -i -e 's/\((\w+) \>\> (\d+)\) \| \(\1 \<\< \(64 \- \2\)\)/ror64(\1, \2)/g' drivers/staging/skein/threefish_block.c

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Add whitespace around OR'd flags ("|")

This patch fixes the checkpatch.pl message:

CHECK: spaces preferred around that '|' (ctx:VxV)
+ writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
                                    ^                   ^

As per the guidelines for coding style in the kernel, I have updated the
digi international driver to include spaces around the OR'd flags; not only
is this formatting issue caught by `checkpatch.pl`, in the next `if` block
the correct formatting is used, leading to both incorrect and inconsistent
code formatting.

This patch puts the line in question at 82 characters---while this is over
the recommended limit, there are no clear locations to break the line and it
barely breaks the cutoff.

Signed-off-by: Sam Horlbeck Olsen <sam.horlsen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: usb_halinit: Use !x instead of x == NULL.

Use !x instead of x == NULL.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: rtl8188e_rxdesc: Use !x instead of x == NULL.

Use !x instead of x == NULL.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: hal_intf: Use x instead of x != NULL.

Use x instead of x != NULL.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Hal8188ERateAdaptive: Use x instead of x != NULL.

Use x instead of x != NULL.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove return at end of void function call

Remove unnecessary return statement from last line of void function call

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove license paragraph with mailing address

This fixes the issue reported by checkpatch.pl:

"Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF
has changed addresses in the past, and may do so again.  Linux
already includes a copy of the GPL."

in all files for the rtl8188eu driver.

Signed-off-by: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: removes an unnecessary cast on a void pointer.

Patch to rtl8188e_rxdesc.c to remove an unnecessary cast on a void
pointer.

Signed-off-by: Ben Marsh <bmarsg94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl8712_cmd.c: fixed comparison to null

This patch fixes multiple "comparison to NULL"
checkpatch.pl issues:

CHECK: Comparison to NULL could be written "!pcmd"
+               if (pcmd == NULL)

Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: hal_init.c: fix comment block code style

This patch fixes several warnings caused by
malformed comments on hal_init.c and found by
checkpatch.pl.

Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Replaced comparison to NULL statements

This patch corrects checks generated by checkpatch.pl by
replacing comparison to null statements with equivalent
statements in the form "x" or "!x"

Signed-off-by: Roger H. Newell <newell.roger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Removed braces from single block statements

This patch corrects warnings generated by checkpatch.pl by
removing braces from single block statements.

Signed-ff-by: Roger H. Newell <newell.roger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace sem_test_key_block with a completion

    Semaphore sem_test_key_block is used to signal completion of its
    host interface message. Since the thread locking this semaphore will
    have to wait, completions are the preferred mechanism and will offer
    a performance improvement.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace sem_test_disconn_block with a completion

Semaphore sem_test_disconn_block is used to signal completion of its
host interface message. Since the thread locking this semaphore will
have to wait, completions are the preferred mechanism and will offer
a performance improvement.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace semaphore sem_get_rssi with a completion

Semaphore sem_get_rssi is used to signal completion of its host
interface message. Since the thread locking this semaphore will have
to wait, completions are the preferred mechanism and will offer a
performance improvement.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace semaphore sem_inactive_time with a completion

Semaphore sem_inactive_time is used to signal completion of its host
interface message. Since the thread locking this semaphore will have
to wait, completions are the preferred mechanism and will offer a
performance improvement.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Fix lines over 80 characters

Break lines so that they do not exceed 80
characters. Problem found using checkpatch.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: else is not generally useful after a break or return

Remove else after a break. Because else is
generally not useful after a break or return.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use completion instead of struct semaphore hif_sema_wait_response

This patch replaces struct semaphore hif_sema_wait_response with struct
completion hif_wait_response. In case of struct hif_sema_wait_response,
it better to use completion than semaphore.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes an unnecessary if-condition

This patch removes an unnecessary if-condition.
Regardless of an if-condition is performed unconditionally '_end_' statement.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes goto definitions from wilc_wlan_firmware_download

This patch removes goto definitions from wilc_wlan_firmware_download function.
Goto '_fail_1' feature is error return.
It returns error type directly without result variable replacement as well.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: changes an ambiguous debug messages

This patches changes an ambiguous debug messages.
The device types are both SDIO or SPI.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes duplicate wilc variable setting

This patches removes duplicate wilc variable setting.
This value has already been set to wl variable previously.
Replace wilc with wl as well.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes duplicate vif variable setting

This patches removes duplicate vif variable setting.
This value has already been set previously.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_spi.c: removes debug print log

This patches removes unnecessary debug print logs.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes function 'init_tcp_tracking()'

This patch removes function 'init_tcp_tracking()'.
The function is an unnecessary return.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: nvec: removes a useless cast on a void pointer

Remove an unnecessary cast on a void pointer in nvec_power.c

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: Fix comparison to NULL

Replace the use of comparison to NULL, use !<expression> instead. Checkpatch detected these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: Remove space after a cast

No space is required after a cast. Checkpatch detected this issue.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix alignment with open parenthesis

Alignment should match open parenthesis. Checkpatch detected these
issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Use type int instead of int32_t

Prefer the use of type int instead of int32_t. Checkpatch detected these
issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Add error check for pci_map_single

Currently, DMA mapping failure is not detected, causing the hardware
to attempt a DMA from an invalid address.

This patch adds the corresponding error check for pci_map_single i.e.
pci_dma_mapping_error.

Problem found using the following Coccinelle semantic patch:
// <smpl>
@@
expression e1;
identifier x;
@@
 x=
(
*dma_map_single(...)
|
*dma_map_page(...)
)
... when != dma_mapping_error(e1,x)
@@
expression e1;
identifier x;
@@

 x =
(
*pci_map_single(...)
|
*pci_map_page(...)
)
 ... when != pci_dma_mapping_error(e1,x)
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Remove atomic_counter_t typedef

Remove atomic_counter_t typedef, use int instead.

Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: ad5933: Remove unnecessary space after cast.

Remove unnecessary space after cast.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: ade7758: Fix open parentheses alignment issues.

Fix open parentheses alignment issues.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: ade7758: Use a blank line after function/struct declarations.

Use a blank line after function/struct declarations.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: ade7758_core: Remove unnecessary blank line.

Remove unnecessary blank line.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: ade7758_core: Fix open parentheses alignment issues.

Fix open parentheses alignment issues.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad5933: remove unused #includes

Remove #includes no longer used in this module.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad5933: move contents of header file to source file

The contents of the header file are used only by this single
source file.  Move content into .c and remove .h.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: io-trig-bfin-timer: use dev_get_platdata()

Use dev_get_platdata() for retrieving the platform data instead of
accessing dev->platform_data directly. Move the assignment out of
the declaration (avoid lines over 80 char and put it close to
usage).

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad5933: use dev_get_platdata()

Use dev_get_platdata() for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: meter: remove fixme comment on device remove

This comment was in place in the original drafts of these drivers
when the remove function did a whole lot of work: flushed queues,
unregistered interrupts, uninitialized rings, unconfigured rings,
and a few kfree's.

The remove functions have since been reduced to unregistering and
stopping the device.  This is the inverse of what was done during
probe and is correct. Time to remove the comment.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: tsl2x7x_core: add blank line after struct declaration

Add the missing blank line after struct declaration. Checkpatch found
this issue.

CHECK: Please use a blank line after function/struct/union/enum
declarations

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: tsl2x7x_core: add spaces around operators

Address the checkpatch check by adding the necessary whitespace around
operators:

CHECK: spaces preferred around that '/' (ctx:VxV)

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: tsl2x7x_core: remove space after a cast

Delete unneeded space after a cast as suggested by checkpatch.

CHECK: No space is necessary after a cast.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: tsl2x7x_core: use preferred comment style

Adjust block comments by adding the necessary trailing */ on a separate
line. Checkpatch found this issue.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: tsl2x7x_core: adjust alignment to match open parenthesis

Align the parameters to match open parenthesis. Issue detected using
checkpatch.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: rename create_visor_device gotos

Away is ambiguous when specifying error vs success. Make return labels
more meaningful by marking them as error paths.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove gotos in visorbus_match

Gotos in visorbus_match are not needed.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix up gotos in visorbus_init

This patch fixes the gotos in visorbus_init

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: remove unused sysfs attribute devmajorminor/*

The sysfs attribute directory at:

    /sys/bus/visorbus/devices/vbus<x>:dev<y>/devmajorminor/*

or

    /sys/devices/visorbus<x>/vbus<x>:dev<y>/devmajorminor/*

previously provided a location where a visorbus function driver could
publish information (for usermode use) about possibly-multiple major and
minor device numbers for character devices created for a each visorbus
device, using visorbus_registerdevnode().  This functionality is not
currently used, so it has been removed by this cset.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Fix up visordriver_probe

Fixup the visordriver_probe function. Rearrange the function to avoid
needing gotos and removed unnecessary wmb().

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: fix my_create_device goto statements

Don't use the abmiguous cleanup, make it more meaningful.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Cleanup bus_epilog goto statements

Cleaned up bus_epilogs vague gotos and in the process discovered
some error paths that could unlock a non locked semaphore.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Cleanup goto in bus_create

Rename it to what it does instead of the default ambiguous
cleanup.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: chipset_init rename goto

Change the goto label "cleanup" to something more useful like
out_respond.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: cleanup gotos in parser_init_byte_stream

Clean up the goto in parser_init_byte_stream and make the goto section
the error case.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: get rid of gotos in intialize_controlvm_payload_info

Get rid of the gotos in initialize_controlvm_payload_info. The check in
the error path if payload was valid was never called so get rid of that
as well.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: cleanup goto in setup_crash_devices_work_queue

If visorbus has registered yet just reschedule and exit. The rest of
the function doesn't need to reschedule so just move it up to the
initial check.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: cleanup comment style for lnet selftest

Apply a consistent style for comments in the lnet selftest
code. Realign some of the comments to make it easier to read.
This also fixes a few checkpatch issues as well.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: realign some code in lnet selftest so its readable

Two places to align the code so it is easier to read.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove excess blank lines in lnet selftest code

Remove extra blank lines missed by checkpatch.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: handle error returned from wait_event_timeout seltest timer

The function wait_event_timeout can fail and return an error. Handle
this case in stt_timer_main().

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: add missing buffer overflow fix for console.c

Patch 9389 change a strncpy call into a strlcpy call. This was
missed in the merger into the upstream client.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9389
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Correct missing newline for CERROR call in sfw_handle_server_rpc

This is one of the fixes broken out of patch 10000 that was
missed in the merger. With this fix the CERROR called in
sfw_handle_server_rpc will print out correctly.

Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4871
Reviewed-on: http://review.whamcloud.com/10000
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Cliff White <cliff.white@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Replace sg++ with sg = sg_next(sg)

With scatterlist chaining, simply incrementing the array does not
work. sg_next macro was thus introduced to follow the chain links
when necessary. So replace sg++ with sg_next.

This change was made with the help of the following Coccinelle
semantic patch:
//<smpl>
@@
struct scatterlist *sg;
@@
-sg++
+sg = sg_next(sg)
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.6-rc1

Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull Ceph updates from Sage Weil:
 "There is quite a bit here, including some overdue refactoring and
  cleanup on the mon_client and osd_client code from Ilya, scattered
  writeback support for CephFS and a pile of bug fixes from Zheng, and a
  few random cleanups and fixes from others"

[ I already decided not to pull this because of it having been rebased
  recently, but ended up changing my mind after all.  Next time I'll
  really hold people to it.  Oh well.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits)
  libceph: use KMEM_CACHE macro
  ceph: use kmem_cache_zalloc
  rbd: use KMEM_CACHE macro
  ceph: use lookup request to revalidate dentry
  ceph: kill ceph_get_dentry_parent_inode()
  ceph: fix security xattr deadlock
  ceph: don't request vxattrs from MDS
  ceph: fix mounting same fs multiple times
  ceph: remove unnecessary NULL check
  ceph: avoid updating directory inode's i_size accidentally
  ceph: fix race during filling readdir cache
  libceph: use sizeof_footer() more
  ceph: kill ceph_empty_snapc
  ceph: fix a wrong comparison
  ceph: replace CURRENT_TIME by current_fs_time()
  ceph: scattered page writeback
  libceph: add helper that duplicates last extent operation
  libceph: enable large, variable-sized OSD requests
  libceph: osdc->req_mempool should be backed by a slab pool
  libceph: make r_request msg_size calculation clearer
  ...

Merge tag 'ofs-pull-tag-1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs filesystem from Mike Marshall.

This finally merges the long-pending orangefs filesystem, which has been
much cleaned up with input from Al Viro over the last six months.  From
the documentation file:

 "OrangeFS is an LGPL userspace scale-out parallel storage system.  It
  is ideal for large storage problems faced by HPC, BigData, Streaming
  Video, Genomics, Bioinformatics.

  Orangefs, originally called PVFS, was first developed in 1993 by Walt
  Ligon and Eric Blumer as a parallel file system for Parallel Virtual
  Machine (PVM) as part of a NASA grant to study the I/O patterns of
  parallel programs.

  Orangefs features include:

    - Distributes file data among multiple file servers
    - Supports simultaneous access by multiple clients
    - Stores file data and metadata on servers using local file system
      and access methods
    - Userspace implementation is easy to install and maintain
    - Direct MPI support
    - Stateless"

see Documentation/filesystems/orangefs.txt for more in-depth details.

* tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits)
  orangefs: fix orangefs_superblock locking
  orangefs: fix do_readv_writev() handling of error halfway through
  orangefs: have ->kill_sb() evict the VFS side of things first
  orangefs: sanitize ->llseek()
  orangefs-bufmap.h: trim unused junk
  orangefs: saner calling conventions for getting a slot
  orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer
  orangefs: get rid of readdir_handle_s
  ornagefs: ensure that truncate has an up to date inode size
  orangefs: move code which sets i_link to orangefs_inode_getattr
  orangefs: remove needless wrapper around GFP_KERNEL
  orangefs: remove wrapper around mutex_lock(&inode->i_mutex)
  orangefs: refactor inode type or link_target change detection
  orangefs: use new getattr for revalidate and remove old getattr
  orangefs: use new getattr in inode getattr and permission
  orangefs: use new orangefs_inode_getattr to get size in write and llseek
  orangefs: use new orangefs_inode_getattr to create new inodes
  orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr
  orangefs: remove inode->i_lock wrapper
  orangefs: put register_chrdev immediately before register_filesystem
  ...

Merge tag 'ntb-4.6' of git://github.com/jonmason/ntb

Pull NTB bug fixes from Jon Mason:
 "NTB bug fixes for tasklet from spinning forever, link errors,
  translation window setup, NULL ptr dereference, and ntb-perf errors.

  Also, a modification to the driver API that makes _addr functions
  optional"

* tag 'ntb-4.6' of git://github.com/jonmason/ntb:
  NTB: Remove _addr functions from ntb_hw_amd
  NTB: Make _addr functions optional in the API
  NTB: Fix incorrect clean up routine in ntb_perf
  NTB: Fix incorrect return check in ntb_perf
  ntb: fix possible NULL dereference
  ntb: add missing setup of translation window
  ntb: stop link work when we do not have memory
  ntb: stop tasklet from spinning forever during shutdown.
  ntb: perf test: fix address space confusion