GitHub/mt8127/android_kernel_alcatel_ttab.git
14 years agonet: restore ip source validation
Jamal Hadi Salim [Sat, 26 Dec 2009 01:30:22 +0000 (17:30 -0800)]
net: restore ip source validation

when using policy routing and the skb mark:
there are cases where a back path validation requires us
to use a different routing table for src ip validation than
the one used for mapping ingress dst ip.
One such a case is transparent proxying where we pretend to be
the destination system and therefore the local table
is used for incoming packets but possibly a main table would
be used on outbound.
Make the default behavior to allow the above and if users
need to turn on the symmetry via sysctl src_valid_mark

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2x: Initialize cnic status block during chip reset
Michael Chan [Sat, 26 Dec 2009 01:13:07 +0000 (17:13 -0800)]
bnx2x: Initialize cnic status block during chip reset

When the device is reset during MTU change, ring size change, or self
test, etc, the cnic status block needs to be properly initialized if
cnic is registered.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agopktgen: ndo_start_xmit can return NET_XMIT_xxx values
John Fastabend [Thu, 24 Dec 2009 06:02:57 +0000 (22:02 -0800)]
pktgen: ndo_start_xmit can return NET_XMIT_xxx values

This updates pktgen so that it does not decrement skb->users
when it receives valid NET_XMIT_xxx values.  These are now
valid return values from ndo_start_xmit in net-next-2.6.
They also indicate the skb has been consumed.

This fixes pktgen to work correctly with vlan devices.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/via-rhine: Fix scheduling while atomic bugs
Jarek Poplawski [Thu, 24 Dec 2009 05:54:29 +0000 (21:54 -0800)]
net/via-rhine: Fix scheduling while atomic bugs

There are BUGs "scheduling while atomic" triggered by the timer
rhine_tx_timeout(). They are caused by calling napi_disable() (with
msleep()). This patch fixes it by moving most of the timer content to
the workqueue function (similarly to other drivers, like tg3), with
spin_lock() changed to BH version.

Additionally, there is spin_lock_irq() moved in rhine_close() to
exclude napi_disable() etc., also tg3's way.

Reported-by: Andrey Rahmatullin <wrar@altlinux.org>
Tested-by: Andrey Rahmatullin <wrar@altlinux.org>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: fix Need to call pci_save_state after pci_restore_state
Don Skidmore [Thu, 24 Dec 2009 05:19:19 +0000 (21:19 -0800)]
ixgbe: fix Need to call pci_save_state after pci_restore_state

This patch adds a pci_save_state() call in ixgbe_resume() after
pci_restore_state(). A similar change was made in ixgbe_io_slot_reset()
that accommodates pci_restore_state() new behavior. This change makes
pci_restore_state() clear the saved_state flag This is necessary due
to a resent kernel change to pci_restore_state() so that it now clears
the saved_state flag of the device right after the device.s standard
configuration registers have been poplulated with the previously saved
values.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: Bug fix to return correct values in ethtool get_settings.
Sarveshwar Bandi [Wed, 23 Dec 2009 04:42:51 +0000 (04:42 +0000)]
be2net: Bug fix to return correct values in ethtool get_settings.

Changes to return correct values for transceiver and supported in
ethtool get_settings function.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: Bug fix to config NIC appropriately before loopback test
Sarveshwar Bandi [Wed, 23 Dec 2009 04:41:44 +0000 (04:41 +0000)]
be2net: Bug fix to config NIC appropriately before loopback test

NIC controller has to be set to an appropriate mode before doing a loopback
test. Test will fail otherwise.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: Bug fix to avoid soft lockup in loopback test.
Sarveshwar Bandi [Wed, 23 Dec 2009 04:40:36 +0000 (04:40 +0000)]
be2net: Bug fix to avoid soft lockup in loopback test.

This change ensures that loopback test command gives up after 4 seconds when
the hardware is not responsive. This could happen if the ports are connected
properly in loopback mode.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigbvf: Make igbvf error message more informative
Williams, Mitch A [Wed, 23 Dec 2009 13:22:43 +0000 (13:22 +0000)]
igbvf: Make igbvf error message more informative

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigb: check both function bits in status register in wol exception
Alexander Duyck [Wed, 23 Dec 2009 13:21:46 +0000 (13:21 +0000)]
igb: check both function bits in status register in wol exception

The ethtool code for enabling Wake on Lan was not correctly checking the
status register bits so as a result ports 0 and 2 were both being allowed
to set WOL to enabled even though it is only supported on the first port
for our adapters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigb: correctly offset 82575 flow control watermarks by 16 bytes
Alexander Duyck [Wed, 23 Dec 2009 13:21:27 +0000 (13:21 +0000)]
igb: correctly offset 82575 flow control watermarks by 16 bytes

The watermark values for the 82575 were not being set correctly.  As a
result the high and low watermark values were set to the same value which
can lead to excess xon/xoff packets being generated.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigb: do not force retry count to 1 on 82580 phy
Alexander Duyck [Wed, 23 Dec 2009 13:21:07 +0000 (13:21 +0000)]
igb: do not force retry count to 1 on 82580 phy

This change resolves an issue seen in some configurations where the link
may drop to 100Mb/s even though the link itself supports 1000Mb/s.  The
issue was root caused to the fact that we were only trying the link once.
Now instead we will try up to 5 attempts on a faulty cable before
downshifting to 100Mb/s.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigb: do not force pcs link when in KX mode
Alexander Duyck [Wed, 23 Dec 2009 13:20:47 +0000 (13:20 +0000)]
igb: do not force pcs link when in KX mode

We were forcing the PCS link up in error when we are in KX mode.  We should
only be disabling autoneg, not forcing the link up.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Disable TX descriptor prefetch watchdog
Ben Hutchings [Wed, 23 Dec 2009 13:49:13 +0000 (13:49 +0000)]
sfc: Disable TX descriptor prefetch watchdog

This hardware watchdog can misfire, so it does more harm than good.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: QT2025C: Add error message for suspected bad SFP+ cables
Ben Hutchings [Wed, 23 Dec 2009 13:48:42 +0000 (13:48 +0000)]
sfc: QT2025C: Add error message for suspected bad SFP+ cables

Some cables have EEPROMs that conflict with the PHY's on-board EEPROM
so it cannot load firmware.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: QT2025C: Work around PHY firmware initialisation bug
Matthew Slattery [Wed, 23 Dec 2009 13:48:32 +0000 (13:48 +0000)]
sfc: QT2025C: Work around PHY firmware initialisation bug

The PHY's firmware very occasionally appears to lock up very early, but
with the heartbeat update still running.  Rebooting the microcontroller
core seems to be sufficient to recover.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: QT2025C: Switch into self-configure mode when not in loopback
Matthew Slattery [Wed, 23 Dec 2009 13:48:04 +0000 (13:48 +0000)]
sfc: QT2025C: Switch into self-configure mode when not in loopback

The PHY boots in a mode which is not necessarily optimal.  This change
switches it to self-configure mode (except when in loopback, which
won't work in that mode if an SFP+ module is not present) by rebooting
the PHY's microcontroller, and replicating the sequence of configuration
writes from the boot EEPROM with the appropriate changes.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: QT2025C: Work around PHY bug
Matthew Slattery [Wed, 23 Dec 2009 13:47:37 +0000 (13:47 +0000)]
sfc: QT2025C: Work around PHY bug

If we see the PHY remaining stuck in a link-down state due to PCS being
down while PMA/PMD is up, we briefly switch to PMA/PMD loopback and back,
which usually unsticks it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Fix DMA mapping cleanup in case of an error in TSO
Neil Turton [Wed, 23 Dec 2009 13:47:13 +0000 (13:47 +0000)]
sfc: Fix DMA mapping cleanup in case of an error in TSO

We need buffer->len to remain valid to work out the correct address to
be unmapped.  We therefore need to clear buffer->len after the unmap
operation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Include XGXS in XMAC link status check except in XGMII loopback
Ben Hutchings [Wed, 23 Dec 2009 13:46:47 +0000 (13:46 +0000)]
sfc: Include XGXS in XMAC link status check except in XGMII loopback

The XGXS block may not get a link immediately in XGXS or XAUI loopback
modes, so we still need to check it.  Split falcon_xaui_link_ok() into
falcon_xgxs_link_ok(), which checks only the Falcon XGXS block, and
falcon_xmac_link_ok(), which checks one or both sides of the link as
appropriate.  Also rename falcon_check_xaui_link() to
falcon_xmac_link_ok_retry().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Move PHY software state initialisation from init() into probe()
Steve Hodgson [Wed, 23 Dec 2009 13:46:36 +0000 (13:46 +0000)]
sfc: Move PHY software state initialisation from init() into probe()

This prevents efx->link_advertising from being blatted during
a reset.

The phy_short_reach sysfs node is now destroyed later in the
port shutdown process, so check for STATE_RUNNING after
acquiring the rtnl_lock (just like in set_phy_flash_cfg).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 21 Dec 2009 19:54:49 +0000 (11:54 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

14 years agops3_gelic_wireless: Fix build failure due to missing WEXT_PRIV
Benjamin Herrenschmidt [Fri, 18 Dec 2009 19:19:32 +0000 (11:19 -0800)]
ps3_gelic_wireless: Fix build failure due to missing WEXT_PRIV

The option to support the old style PSK interface in the PS3
GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agomac80211: fix WMM AP settings application
Johannes Berg [Thu, 17 Dec 2009 15:16:53 +0000 (16:16 +0100)]
mac80211: fix WMM AP settings application

My
  commit 77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8
  Author: Johannes Berg <johannes@sipsolutions.net>
  Date:   Tue Jul 7 03:45:17 2009 +0200

      mac80211: rework MLME for multiple authentications

inadvertedly broke WMM because it removed, along with
a bunch of other now useless initialisations, the line
initialising sdata->u.mgd.wmm_last_param_set to -1
which would make it adopt any WMM parameter set. If,
as is usually the case, the AP uses WMM parameter set
sequence number zero, we'd never update it until the
AP changes the sequence number.

Add the missing initialisation back to get the WMM
settings from the AP applied locally.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org [2.6.31+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agomac80211: fix peer HT capabilities
Johannes Berg [Thu, 17 Dec 2009 12:55:48 +0000 (13:55 +0100)]
mac80211: fix peer HT capabilities

I noticed yesterday, because Jeff had noticed
a speed regression, cf. bug
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138
that the SM PS settings for peers were wrong.
Instead of overwriting the SM PS settings with
the local bits, we need to keep the remote bits.

The bug was part of the original HT code from
over two years ago, but unfortunately nobody
noticed that it makes no sense -- we shouldn't
be overwriting the peer's setting with our own
but rather keep it intact when masking the peer
capabilities with our own.

While fixing that, I noticed that the masking of
capabilities is completely useless for most of
the bits, so also fix those other bits.

Finally, I also noticed that PSMP_SUPPORT no
longer exists in the final 802.11n version, so
also remove that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwmc3200wifi: Fix test of unsigned in iwm_ntf_stop_resume_tx()
Roel Kluin [Wed, 16 Dec 2009 16:01:38 +0000 (17:01 +0100)]
iwmc3200wifi: Fix test of unsigned in iwm_ntf_stop_resume_tx()

`queue' was unsigned so the test did not work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Reviewed-by: Pavel Roskin <proski@gnu.org>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoLibertas: fix buffer overflow in lbs_get_essid()
Daniel Mack [Wed, 16 Dec 2009 04:12:58 +0000 (05:12 +0100)]
Libertas: fix buffer overflow in lbs_get_essid()

The libertas driver copies the SSID buffer back to the wireless core and
appends a trailing NULL character for termination. This is

a) unnecessary because the buffer is allocated with kzalloc and is hence
   already NULLed when this function is called, and

b) for priv->curbssparams.ssid_len == 32, it writes back one byte too
   much which causes memory corruptions.

Fix this by removing the extra write.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Maithili Hinge <maithili@marvell.com>
Cc: Kiran Divekar <dkiran@marvell.com>
Cc: Michael Hirsch <m.hirsch@raumfeld.com>
Cc: netdev@vger.kernel.org
Cc: libertas-dev@lists.infradead.org
Cc: linux-wireless@lists.infradead.org
Cc: stable@kernel.org
Acked-by: Holger Schurig <holgerschurig@gmail.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agodrivers/net/wireless/iwlwifi/iwl-tx.c: fix gcc-3.4.5 warning
akpm@linux-foundation.org [Mon, 14 Dec 2009 23:56:54 +0000 (15:56 -0800)]
drivers/net/wireless/iwlwifi/iwl-tx.c: fix gcc-3.4.5 warning

drivers/net/wireless/iwlwifi/iwl-tx.c: In function `iwl_hw_txq_ctx_free':
drivers/net/wireless/iwlwifi/iwl-tx.c:410: warning: suggest explicit braces to avoid ambiguous `else'

Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k: Stop ANI when doing a reset
Sujith [Mon, 14 Dec 2009 11:04:56 +0000 (16:34 +0530)]
ath9k: Stop ANI when doing a reset

The MIB counters are disabled when doing a chip reset.
Since ANI depends on the MIB registers for its operation, relying
on the contents of said registers during HW reset results in sub-optimal
performance.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k: Fix TX queue draining
Sujith [Mon, 14 Dec 2009 09:27:08 +0000 (14:57 +0530)]
ath9k: Fix TX queue draining

When TX DMA termination has failed, the HW has to be reset
completely. Doing a fast channel change in this case is insufficient.
Also, change the debug level of a couple of messages to FATAL.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k: Fix bug in assigning sequence number
Sujith [Mon, 14 Dec 2009 09:26:56 +0000 (14:56 +0530)]
ath9k: Fix bug in assigning sequence number

The internal, driver-specific maintenance of sequence
numbers is applicable only for HT frames.

Also, remove comments that are not relevant anymore.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agort2x00: Fix calculation of rt2800 iveiv entry offset.
Gertjan van Wingerde [Mon, 14 Dec 2009 22:32:31 +0000 (23:32 +0100)]
rt2x00: Fix calculation of rt2800 iveiv entry offset.

Fix typo. The index should be multiplied by the entry size, not 'and'-ed.

Found via code-inspection.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: fix 40MHz operation setting on cards that do not allow it
Reinette Chatre [Mon, 14 Dec 2009 22:12:13 +0000 (14:12 -0800)]
iwlwifi: fix 40MHz operation setting on cards that do not allow it

Some devices have 40MHz operation disabled entirely. Ensure that driver do
not enable 40MHz operation if a channel does not allow this.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2135

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwl3945: fix panic in iwl3945 driver
Zhu Yi [Mon, 14 Dec 2009 22:12:12 +0000 (14:12 -0800)]
iwl3945: fix panic in iwl3945 driver

3945 updated write_ptr without regard to read_ptr on the Tx path.
This messes up our TFD on high load and result in the following:

<1>[ 7290.414172] IP: [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
<4>[ 7290.414205] PGD 0
<1>[ 7290.414214] Thread overran stack, or stack corrupted
<0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP
<0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
<4>[ 7290.414265] CPU 0
<4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress
<6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P           2.6.32-rc8-wl #213 Aspire 5720
<6>[ 7290.414507] RIP: 0010:[<ffffffffa0dd53a1>]  [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
<6>[ 7290.414541] RSP: 0018:ffff880002203d60  EFLAGS: 00010246
<6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013
<6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038
<6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100
<6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0
<6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201
<6>[ 7290.414655] FS:  0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000
<6>[ 7290.414677] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
<6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0
<6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60)
<0>[ 7290.414772] Stack:
<4>[ 7290.414780]  ffff880002203da0 0000000000000046 0000000000000000 0000000000000046
<4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010
<4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000
<0>[ 7290.414858] Call Trace:
<0>[ 7290.414867]  <IRQ>
<4>[ 7290.414884]  [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945]
<4>[ 7290.414910]  [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60
<4>[ 7290.414931]  [<ffffffff81049a21>] tasklet_action+0x101/0x110
<4>[ 7290.414950]  [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160
<4>[ 7290.414968]  [<ffffffff8100d01c>] call_softirq+0x1c/0x30
<4>[ 7290.414986]  [<ffffffff8100eff5>] do_softirq+0x75/0xb0
<4>[ 7290.415003]  [<ffffffff81049ee5>] irq_exit+0x95/0xa0
<4>[ 7290.415020]  [<ffffffff8100e547>] do_IRQ+0x77/0xf0
<4>[ 7290.415038]  [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf
<0>[ 7290.415052]  <EOI>
<4>[ 7290.415067]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
<4>[ 7290.415087]  [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5
<4>[ 7290.415107]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
<4>[ 7290.415130]  [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0
<4>[ 7290.415149]  [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110
<4>[ 7290.415168]  [<ffffffff8137b3d5>] ? rest_init+0x75/0x80
<4>[ 7290.415187]  [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3
<4>[ 7290.415206]  [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129
<4>[ 7290.415227]  [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb
<0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f <c6> 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49
<1>[ 7290.415382] RIP  [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
<4>[ 7290.415410]  RSP <ffff880002203d60>
<0>[ 7290.415421] CR2: 0000000000000041
<4>[ 7290.415436] ---[ end trace ec46807277caa515 ]---
<0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt
<4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P      D    2.6.32-rc8-wl #213
<4>[ 7290.415486] Call Trace:
<4>[ 7290.415495]  <IRQ>  [<ffffffff8138c040>] panic+0x7d/0x13a
<4>[ 7290.415519]  [<ffffffff8101071a>] oops_end+0xda/0xe0
<4>[ 7290.415538]  [<ffffffff8102e1ea>] no_context+0xea/0x250
<4>[ 7290.415557]  [<ffffffff81038991>] ? select_task_rq_fair+0x511/0x780
<4>[ 7290.415578]  [<ffffffff8102e475>] __bad_area_nosemaphore+0x125/0x1e0
<4>[ 7290.415597]  [<ffffffff81038d0c>] ? __enqueue_entity+0x7c/0x80
<4>[ 7290.415616]  [<ffffffff81039201>] ? enqueue_task_fair+0x111/0x150
<4>[ 7290.415636]  [<ffffffff8102e53e>] bad_area_nosemaphore+0xe/0x10
<4>[ 7290.415656]  [<ffffffff8102e8fa>] do_page_fault+0x26a/0x320
<4>[ 7290.415674]  [<ffffffff813905df>] page_fault+0x1f/0x30
<4>[ 7290.415697]  [<ffffffffa0dd53a1>] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
<4>[ 7290.415723]  [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945]
<4>[ 7290.415746]  [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60
<4>[ 7290.415764]  [<ffffffff81049a21>] tasklet_action+0x101/0x110
<4>[ 7290.415783]  [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160
<4>[ 7290.415801]  [<ffffffff8100d01c>] call_softirq+0x1c/0x30
<4>[ 7290.415818]  [<ffffffff8100eff5>] do_softirq+0x75/0xb0
<4>[ 7290.415835]  [<ffffffff81049ee5>] irq_exit+0x95/0xa0
<4>[ 7290.415852]  [<ffffffff8100e547>] do_IRQ+0x77/0xf0
<4>[ 7290.415869]  [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf
<4>[ 7290.415883]  <EOI>  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
<4>[ 7290.415911]  [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5
<4>[ 7290.415931]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
<4>[ 7290.415952]  [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0
<4>[ 7290.415971]  [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110
<4>[ 7290.415989]  [<ffffffff8137b3d5>] ? rest_init+0x75/0x80
<4>[ 7290.416007]  [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3
<4>[ 7290.416026]  [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129
<4>[ 7290.416047]  [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb

Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: initialize spinlock before use
Reinette Chatre [Mon, 14 Dec 2009 22:12:11 +0000 (14:12 -0800)]
iwlwifi: initialize spinlock before use

Recent powersaving work resulted in power management ops being called
during EEPROM initialization. The lock used by these functions is not
initialized at this time. Ensure lock is initialized before it is used.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwl3945: disable power save
Reinette Chatre [Mon, 14 Dec 2009 22:12:10 +0000 (14:12 -0800)]
iwl3945: disable power save

we see from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2125
that power saving does not work well on 3945. Since then power saving has
also been connected with association problems where an AP deathenticates a
3945 after it is unable to transmit data to it - this happens when 3945
enters power savings mode.

Disable power save support until issues are resolved.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: fix more eeprom endian bugs
Johannes Berg [Mon, 14 Dec 2009 22:12:09 +0000 (14:12 -0800)]
iwlwifi: fix more eeprom endian bugs

I've also for a long time had a problem with the
temperature calculation code, which I had fixed
by byte-swapping the values, and now it turns out
that was the correct fix after all.

Also, any use of iwl_eeprom_query_addr() that is
for more than a u8 must be cast to little endian,
and some structs as well.

Fix all this. Again, no real impact on platforms
that already are little endian.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: fix EEPROM/OTP reading endian annotations and a bug
Johannes Berg [Mon, 14 Dec 2009 22:12:08 +0000 (14:12 -0800)]
iwlwifi: fix EEPROM/OTP reading endian annotations and a bug

The construct "le16_to_cpu((__force __le16)(r >> 16))" has
always bothered me when looking through the iwlwifi code,
it shouldn't be necessary to __force anything, and before
this code, "r" was obtained with an ioread32, which swaps
each of the two u16 values in it properly when swapping the
entire u32 value. I've had arguments about this code with
people before, but always conceded they were right because
removing it only made things not work at all on big endian
platforms.

However, analysing a failure of the OTP reading code, I now
finally figured out what is going on, and why my intuition
about that code being wrong was right all along.

It turns out that the 'priv->eeprom' u8 array really wants
to have the data in it in little endian. So the force code
above and all really converts *to* little endian, not from
it. Cf., for instance, the function iwl_eeprom_query16() --
it reads two u8 values and combines them into a u16, in a
little-endian way. And considering it more, it makes sense
to have the eeprom array as on the device, after all not
all values really are 16-bit values, the MAC address for
instance is not.

Now, what this really means is that all the annotations are
completely wrong. The eeprom reading code should fill the
priv->eeprom array as a __le16 array, with __le16 values.

This also means that iwl_read_otp_word() should really have
a __le16 pointer as the data argument, since it should be
filling that in a format suitable for priv->eeprom.

Propagating these changes throughout, iwl_find_otp_image()
is found to be, now obviously visible, defective -- it uses
the data returned by iwl_read_otp_word() directly as if it
was CPU endianness. Fixing that, which is this hunk of the
patch:

-               next_link_addr = link_value * sizeof(u16);
+               next_link_addr = le16_to_cpu(link_value) * sizeof(u16);

is the only real change of this patch. Everything else is
just fixing the sparse annotations.

Also, the bug only shows up on big endian platforms with a
1000 series card. 5000 and previous series do not use OTP,
and 6000 series has shadow RAM support which means we don't
ever use the defective code on any cards but 1000.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agort2x00: Disable powersaving for rt61pci and rt2800pci.
Gertjan van Wingerde [Mon, 14 Dec 2009 19:33:55 +0000 (20:33 +0100)]
rt2x00: Disable powersaving for rt61pci and rt2800pci.

We've had many reports of rt61pci failures with powersaving enabled.
Therefore, as a stop-gap measure, disable powersaving of the rt61pci
until we have found a proper solution.
Also disable powersaving on rt2800pci as it most probably will show
the same problem.

Cc: stable@kernel.org
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agodrivers/net/wireless: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 16:07:45 +0000 (17:07 +0100)]
drivers/net/wireless: Correct code taking the size of a pointer

sizeof(iv16) and sizeof(iv32) are the sizes of pointers.  Change them to
the size of the copied data.

Furthermore, iveiv_entry is a local structure that has just been
initialized and is not visible outside this function.  Thus, there would
seem to be no point to copy data into it.  The order of the arguments is
thus changed to copy the data into the parameters, which are provided as
pointers, suggesting in this case that they should be used to return values.

A simplified version of the semantic patch that finds the first problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k: Last fix for TX software padding.
Benoit Papillault [Fri, 11 Dec 2009 23:22:35 +0000 (00:22 +0100)]
ath9k: Last fix for TX software padding.

First, we copy/paste the padding stuff from ath9k_tx to ath_tx_cabq since it
needs to same kind of padding, but for internally generated beacons.
Next, software padding done on TX needs to be removed before calling
ieee80211_tx_status. The code was already there in ath_tx_complete but it
was wrong. Fix it by using ath9k_cmn_padpos. This later code has been
tested by sending packets to a monitor interface and reading packets from the
same interface.

Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: fix syslog message for event log dump size
Wey-Yi Guy [Thu, 10 Dec 2009 22:37:23 +0000 (14:37 -0800)]
iwlwifi: fix syslog message for event log dump size

When trigger event log dumping from debugfs, the entire event log
should be dumped and the size should match the number of events being
dump.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: power up all devices for EEPROM read
Reinette Chatre [Thu, 10 Dec 2009 22:37:22 +0000 (14:37 -0800)]
iwlwifi: power up all devices for EEPROM read

Recent commits "iwlwifi: remove power-wasting calls to apm_ops.init()" and
"iwlagn: power up device before initializing EEPROM" had the goal of
reducing device power consumption from the time the module is loaded until
the interface is brought up and the device's power saving mechanisms kick
in. The idea is that once the module is loaded there is no need for the
device to consume power until the interface is brought up.

With the current solution the device is only powered up during EEPROM read,
and then so also only if the EEPROM type is OTP. We have found that on
certain platforms even non-OTP devices require power to be up during EEPROM
read. On these platforms the driver never loads and the system log contains
the following:

iwlagn 0000:03:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x080403D8

We thus now power up all devices during EEPROM read.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: allocated rx page accounting cleanup
Zhu Yi [Thu, 10 Dec 2009 22:37:21 +0000 (14:37 -0800)]
iwlwifi: allocated rx page accounting cleanup

In iwlwifi, priv->alloc_rxb_page is used to keep track of the Rx
pages allocated by the driver. This cleans up the page free routines
by introducing __iwl_free_pages/iwl_free_pages so that the accounting
is more accurate and less error prone. This also fixes two instances where
the counter was not updated.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agobnx2: Fix bnx2_netif_stop() merge error.
Michael Chan [Mon, 21 Dec 2009 02:40:18 +0000 (18:40 -0800)]
bnx2: Fix bnx2_netif_stop() merge error.

The error was introduced while merging:

commit 4529819c45161e4a119134f56ef504e69420bc98
bnx2: reset_task is crashing the kernel. Fixing it.

Signed-off-by: Michael Chan <mchan@broadcom.com>k
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agogianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC
Sandeep Gopalpet [Wed, 16 Dec 2009 01:15:17 +0000 (01:15 +0000)]
gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agogianfar: Fix stats support
Sandeep Gopalpet [Wed, 16 Dec 2009 01:15:07 +0000 (01:15 +0000)]
gianfar: Fix stats support

This patch updates the per rx/tx queue stats.
To update the per rx queue stats a new structure has been
introduced rx_q_stats.
The per tx queue stats are updated via the netdev_queue
structure itself.

Note that we update only the tx_packtes, tx_bytes, rx_packets,
rx_bytes and rx_dropped stats on a per queue basis.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agogianfar: Fix a filer bug
Sandeep Gopalpet [Wed, 16 Dec 2009 01:14:58 +0000 (01:14 +0000)]
gianfar: Fix a filer bug

We need to enable filer whenever we need to use multiple RX
queues. Also, need to program RIR0 register with the required
distribution we require, if using RX filer hashing support for
packet distribution to multiple queues.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2: fixing a timout error due not refreshing TX timers correctly
Breno Leitao [Sat, 19 Dec 2009 04:35:34 +0000 (20:35 -0800)]
bnx2: fixing a timout error due not refreshing TX timers correctly

When running the following script on an active bnx2 interface:

while(true); do ifconfig ethX mtu 9000; ifconfig ethX mtu 1500; done

A timeout error appears and dumps the following stack:

NETDEV WATCHDOG: eth4 (bnx2): transmit queue 0 timed out
------------[ cut here ]------------
Badness at net/sched/sch_generic.c:261
<snip>

This patch just fixes the way that ->trans_start is refreshed.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocan/at91: don't check platform_get_irq's return value against zero
Uwe Kleine-König [Sat, 19 Dec 2009 04:31:56 +0000 (20:31 -0800)]
can/at91: don't check platform_get_irq's return value against zero

platform_get_irq returns -ENXIO on failure, so !irq was probably
always true.  Better use (int)irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion
Yong Zhang [Sat, 19 Dec 2009 04:30:11 +0000 (20:30 -0800)]
mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion

The _ONSTACK variant should be used for on-stack completion,
otherwise it will break lockdep.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2: reset_task is crashing the kernel. Fixing it.
Breno Leitao [Sat, 19 Dec 2009 04:29:04 +0000 (20:29 -0800)]
bnx2: reset_task is crashing the kernel. Fixing it.

If bnx2 schedules a reset via the reset_task, e.g., due to a TX
timeout, it's possible for the NIC to be disabled with packets
pending for transmit.  In this case, napi_disable will loop forever,
eventually crashing the kernel.  This patch moves the disable of
the device to after the napi_disable call.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoipv6: fix an oops when force unload ipv6 module
Yang Hongyang [Sat, 19 Dec 2009 04:25:13 +0000 (20:25 -0800)]
ipv6: fix an oops when force unload ipv6 module

When I do an ipv6 module force unload,I got the following oops:
#rmmod -f ipv6
------------[ cut here ]------------
kernel BUG at mm/slub.c:2969!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/net/eth2/ifindex
Modules linked in: ipv6(-) dm_multipath uinput ppdev tpm_tis tpm tpm_bios pcspkr pcnet32 mii parport_pc i2c_piix4 parport i2c_core floppy mptspi mptscsih mptbase scsi_transport_spi

Pid: 2530, comm: rmmod Tainted: G  R        2.6.32 #2 440BX Desktop Reference Platform/VMware Virtual Platform
EIP: 0060:[<c04b73f2>] EFLAGS: 00010246 CPU: 0
EIP is at kfree+0x6a/0xdd
EAX: 00000000 EBX: c09e86bc ECX: c043e4dd EDX: c14293e0
ESI: e141f1d8 EDI: e140fc31 EBP: dec58ef0 ESP: dec58ed0
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process rmmod (pid: 2530, ti=dec58000 task=decb1940 task.ti=dec58000)
Stack:
 c14293e0 00000282 df624240 c0897d08 c09e86bc c09e86bc e141f1d8 dec58f1c
<0> dec58f00 e140fc31 c09e84c4 e141f1bc dec58f14 c0689d21 dec58f1c e141f1bc
<0> 00000000 dec58f2c c0689eff c09e84d8 c09e84d8 e141f1bc bff33a90 dec58f38
Call Trace:
 [<e140fc31>] ? ipv6_frags_exit_net+0x22/0x32 [ipv6]
 [<c0689d21>] ? ops_exit_list+0x19/0x3d
 [<c0689eff>] ? unregister_pernet_operations+0x2a/0x51
 [<c0689f70>] ? unregister_pernet_subsys+0x17/0x24
 [<e140fbfe>] ? ipv6_frag_exit+0x21/0x32 [ipv6]
 [<e141a361>] ? inet6_exit+0x47/0x122 [ipv6]
 [<c045f5de>] ? sys_delete_module+0x198/0x1f6
 [<c04a8acf>] ? remove_vma+0x57/0x5d
 [<c070f63f>] ? do_page_fault+0x2e7/0x315
 [<c0403218>] ? sysenter_do_call+0x12/0x28
Code: 86 00 00 00 40 c1 e8 0c c1 e0 05 01 d0 89 45 e0 66 83 38 00 79 06 8b 40 0c 89 45 e0 8b 55 e0 8b 02 84 c0 78 14 66 a9 00 c0 75 04 <0f> 0b eb fe 8b 45 e0 e8 35 15 fe ff eb 5d 8b 45 04 8b 55 e0 89
EIP: [<c04b73f2>] kfree+0x6a/0xdd SS:ESP 0068:dec58ed0
---[ end trace 4475d1a5b0afa7e5 ]---

It's because in ip6_frags_ns_sysctl_register,
"table" only alloced when "net" is not equals
to "init_net".So when we free "table" in
ip6_frags_ns_sysctl_unregister,we should check
this first.

This patch fix the problem.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoTI DaVinci EMAC: Fix MDIO bus frequency configuration
Nageswari Srinivasan [Sat, 19 Dec 2009 04:21:21 +0000 (20:21 -0800)]
TI DaVinci EMAC: Fix MDIO bus frequency configuration

There was a typo in "if condition" checking for validity of MDIO
bus frequency passed as part of platform data. Bitwise AND was
being used instead of a Logical AND.

Tested on: DM6467 EVM

Signed-off-by: Nageswari Srinivasan <nageswari@ti.com>
Acked-by: Anant Gole <anantgole@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe100: Fix broken cbs accounting due to missing memset.
Roger Oksanen [Sat, 19 Dec 2009 04:18:21 +0000 (20:18 -0800)]
e100: Fix broken cbs accounting due to missing memset.

Alan Stern noticed that e100 caused slab corruption.
commit 98468efddb101f8a29af974101c17ba513b07be1 changed
the allocation of cbs to use dma pools that don't return zeroed memory,
especially the cb->status field used to track which cb to clean, causing
(the visible) double freeing of skbs and a wrong free cbs count.

Now the cbs are explicitly zeroed at allocation time.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobroadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk()
Roel Kluin [Sat, 19 Dec 2009 04:16:10 +0000 (20:16 -0800)]
broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk()

If not signed read errors are ignored.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe1000e: LED settings in EEPROM ignored on 82571 and 82572
Bruce Allan [Sat, 19 Dec 2009 04:14:59 +0000 (20:14 -0800)]
e1000e: LED settings in EEPROM ignored on 82571 and 82572

Do not override the customizable LED configuration set in the EEPROM.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetxen: use module parameter correctly
Stephen Hemminger [Sat, 19 Dec 2009 04:13:35 +0000 (20:13 -0800)]
netxen: use module parameter correctly

Netxen driver is doing this bogus thing to create a control file.
This fails if device doesn't exist, and overall is a bad way to do
the module parameter. Rather than fix borked code, just rewrite.
Just using a writeable module parameter of 0/1 is the correct way

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetns: fix net.ipv6.route.gc_min_interval_ms in netns
Alexey Dobriyan [Sat, 19 Dec 2009 04:11:03 +0000 (20:11 -0800)]
netns: fix net.ipv6.route.gc_min_interval_ms in netns

sysctl table was copied, all right, but ->data for net.ipv6.route.gc_min_interval_ms
was not reinitialized for "!= &init_net" case.

In init_net everthing works by accident due to correct ->data initialization
in source table.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoBluetooth: Prevent ill-timed autosuspend in USB driver
Oliver Neukum [Wed, 16 Dec 2009 18:23:43 +0000 (19:23 +0100)]
Bluetooth: Prevent ill-timed autosuspend in USB driver

The device must be marked busy as it receives data.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Tested-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Fix L2CAP locking scheme regression
Andrei Emeltchenko [Tue, 15 Dec 2009 09:38:04 +0000 (11:38 +0200)]
Bluetooth: Fix L2CAP locking scheme regression

When locking was introduced the error path branch was not taken
into account. Error was found in sparse code checking. Kudos to
Jani Nikula.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Ack L2CAP I-frames before retransmit missing packet
Gustavo F. Padovan [Tue, 15 Dec 2009 22:13:27 +0000 (20:13 -0200)]
Bluetooth: Ack L2CAP I-frames before retransmit missing packet

Moving the Ack to before l2cap_retransmit_frame() we can avoid the
case where txWindow is full and the packet can't be retransmited.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Fix unset of RemoteBusy flag for L2CAP
Gustavo F. Padovan [Tue, 15 Dec 2009 17:56:34 +0000 (15:56 -0200)]
Bluetooth: Fix unset of RemoteBusy flag for L2CAP

RemoteBusy flag need to be unset before l2cap_ertm_send(), otherwise
l2cap_ertm_send() will return without sending packets because it checks
that flag before start sending.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid()
Roel Kluin [Mon, 7 Dec 2009 13:23:21 +0000 (14:23 +0100)]
Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid()

Return the PTR_ERR of the correct pointer.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
15 years agonet: sh_eth alignment fix for sh7724 using NET_IP_ALIGN V2
Magnus Damm [Wed, 16 Dec 2009 05:16:55 +0000 (21:16 -0800)]
net: sh_eth alignment fix for sh7724 using NET_IP_ALIGN V2

Fix sh_eth for sh7724 by adding NET_IP_ALIGN support V2.
Without this patch the receive data is misaligned.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoixgbe: allow tx of pre-formatted vlan tagged packets
Gurucharan Shetty [Tue, 15 Dec 2009 13:00:31 +0000 (13:00 +0000)]
ixgbe: allow tx of pre-formatted vlan tagged packets

When the 82598 is fed 802.1q packets, it chokes with
an error of the form:

ixgbe: eth0: ixgbe_tx_csum: partial checksum but proto=81!

As the logic there was not smart enough to look into
the vlan header to pick out the encapsulated protocol.

There are times when we'd like to send these packets
out without having to configure a vlan on the interface.
Here we check for the vlan tag and allow the packet to
go out with the correct hardware checksum.

This patch is a clone of a previously submitted patch by
Arthur Jones <ajones@riverbed.com> for igb (Commit -
fa4a7ef36ec834fee1719636b30d2f28f4cb0166).

Signed-off-by: Gurucharan Shetty <gshetty@riverbed.com>
Signed-off-by: Arthur Jones <ajones@riverbed.com>
Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoixgbe: Fix 82598 premature copper PHY link indicatation
Mallikarjuna R Chilakala [Tue, 15 Dec 2009 11:57:20 +0000 (11:57 +0000)]
ixgbe: Fix 82598 premature copper PHY link indicatation

Modified patch with Dave's comments to replace mdelay with proper msleep.
Fix 82598 copper link issue, where the phy prematurely indicates link
before it is ready to process packets. The new function looks for phy
link and indicates that, when it is available. If phy is not ready
within few seconds of MAC indicating link, the function will return
failure which translates to link down indication.

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoixgbe: Fix tx_restart_queue/non_eop_desc statistics counters
Mallikarjuna R Chilakala [Tue, 15 Dec 2009 11:56:59 +0000 (11:56 +0000)]
ixgbe: Fix tx_restart_queue/non_eop_desc statistics counters

Fix the restart_queue and non_eop_desc counters from being
double-counted.  They are cumulative in each ring, so we don't want to
add them to the cumulative result in the adapter's master counter.
Otherwise, the stats will be inaccurate

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobcm63xx_enet: fix compilation failure after get_stats_count removal
Florian Fainelli [Tue, 15 Dec 2009 06:45:06 +0000 (06:45 +0000)]
bcm63xx_enet: fix compilation failure after get_stats_count removal

This patch converts bcm63xx_enet to uset get_sset_count
like the other drivers do.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agopacket: dont call sleeping functions while holding rcu_read_lock()
Eric Dumazet [Tue, 15 Dec 2009 05:47:03 +0000 (05:47 +0000)]
packet: dont call sleeping functions while holding rcu_read_lock()

commit 654d1f8a019dfa06d (packet: less dev_put() calls)
introduced a problem, calling potentially sleeping functions from a
rcu_read_lock() protected section.

Fix this by releasing lock before the sock_wmalloc()/memcpy_fromiovec() calls.

After skb allocation and copy from user space, we redo device
lookup and appropriate tests.

Reported-and-tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
David S. Miller [Wed, 16 Dec 2009 05:08:53 +0000 (21:08 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6

15 years agotcp: Revert per-route SACK/DSACK/TIMESTAMP changes.
David S. Miller [Wed, 16 Dec 2009 04:56:42 +0000 (20:56 -0800)]
tcp: Revert per-route SACK/DSACK/TIMESTAMP changes.

It creates a regression, triggering badness for SYN_RECV
sockets, for example:

[19148.022102] Badness at net/ipv4/inet_connection_sock.c:293
[19148.022570] NIP: c02a0914 LR: c02a0904 CTR: 00000000
[19148.023035] REGS: eeecbd30 TRAP: 0700   Not tainted  (2.6.32)
[19148.023496] MSR: 00029032 <EE,ME,CE,IR,DR>  CR: 24002442  XER: 00000000
[19148.024012] TASK = eee9a820[1756] 'privoxy' THREAD: eeeca000

This is likely caused by the change in the 'estab' parameter
passed to tcp_parse_options() when invoked by the functions
in net/ipv4/tcp_minisocks.c

But even if that is fixed, the ->conn_request() changes made in
this patch series is fundamentally wrong.  They try to use the
listening socket's 'dst' to probe the route settings.  The
listening socket doesn't even have a route, and you can't
get the right route (the child request one) until much later
after we setup all of the state, and it must be done by hand.

This stuff really isn't ready, so the best thing to do is a
full revert.  This reverts the following commits:

f55017a93f1a74d50244b1254b9a2bd7ac9bbf7d
022c3f7d82f0f1c68018696f2f027b87b9bb45c2
1aba721eba1d84a2defce45b950272cee1e6c72a
cda42ebd67ee5fdf09d7057b5a4584d36fe8a335
345cda2fd695534be5a4494f1b59da9daed33663
dc343475ed062e13fc260acccaab91d7d80fd5b2
05eaade2782fb0c90d3034fd7a7d5a16266182bb
6a2a2d6bf8581216e08be15fcb563cfd6c430e1e

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoipvs: zero usvc and udest
Simon Horman [Tue, 15 Dec 2009 16:01:25 +0000 (17:01 +0100)]
ipvs: zero usvc and udest

Make sure that any otherwise uninitialised fields of usvc are zero.

This has been obvserved to cause a problem whereby the port of
fwmark services may end up as a non-zero value which causes
scheduling of a destination server to fail for persisitent services.

As observed by Deon van der Merwe <dvdm@truteq.co.za>.
This fix suggested by Julian Anastasov <ja@ssi.bg>.

For good measure also zero udest.

Cc: Deon van der Merwe <dvdm@truteq.co.za>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
15 years agonetfilter: fix crashes in bridge netfilter caused by fragment jumps
Patrick McHardy [Tue, 15 Dec 2009 15:59:59 +0000 (16:59 +0100)]
netfilter: fix crashes in bridge netfilter caused by fragment jumps

When fragments from bridge netfilter are passed to IPv4 or IPv6 conntrack
and a reassembly queue with the same fragment key already exists from
reassembling a similar packet received on a different device (f.i. with
multicasted fragments), the reassembled packet might continue on a different
codepath than where the head fragment originated. This can cause crashes
in bridge netfilter when a fragment received on a non-bridge device (and
thus with skb->nf_bridge == NULL) continues through the bridge netfilter
code.

Add a new reassembly identifier for packets originating from bridge
netfilter and use it to put those packets in insolated queues.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14805

Reported-and-Tested-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Patrick McHardy <kaber@trash.net>
15 years agoipv6: reassembly: use seperate reassembly queues for conntrack and local delivery
Patrick McHardy [Tue, 15 Dec 2009 15:59:18 +0000 (16:59 +0100)]
ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery

Currently the same reassembly queue might be used for packets reassembled
by conntrack in different positions in the stack (PREROUTING/LOCAL_OUT),
as well as local delivery. This can cause "packet jumps" when the fragment
completing a reassembled packet is queued from a different position in the
stack than the previous ones.

Add a "user" identifier to the reassembly queue key to seperate the queues
of each caller, similar to what we do for IPv4.

Signed-off-by: Patrick McHardy <kaber@trash.net>
15 years agosky2: leave PCI config space writeable
stephen hemminger [Mon, 14 Dec 2009 08:50:12 +0000 (08:50 +0000)]
sky2: leave PCI config space writeable

Since power management is done by PCI subsystem as well as driver,
don't toggle the bit that disables PCI register writes.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosky2: print Optima chip name
stephen hemminger [Mon, 14 Dec 2009 08:33:47 +0000 (08:33 +0000)]
sky2: print Optima chip name

Off by one in name lookup makes Optima display as (chip 0xbc)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agox25: Update maintainer.
Arnd Bergmann [Mon, 14 Dec 2009 01:53:41 +0000 (01:53 +0000)]
x25: Update maintainer.

On Monday 14 December 2009, andrew hendry wrote:
> Thanks, I didn't know X.25 was actively maintained. I get bounces.
> Is the the maintainers out of date?

From looking at the posts on the x.25 mailing list and the changes
that went into the kernel during the last three years in that area,
I think it is safe to say that you are now the maintainer ;-).

The last mail on this topic from Henner Eisen was around 2001.

> AX.25 NETWORK LAYER
> M:      Ralf Baechle <ralf@linux-mips.org>
>
> X.25 NETWORK LAYER
> M:      Henner Eisen <eis@baty.hanse.de>

How about this change?

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agomac80211: Add define for TX headroom reserved by mac80211 itself.
Gertjan van Wingerde [Fri, 4 Dec 2009 22:46:54 +0000 (23:46 +0100)]
mac80211: Add define for TX headroom reserved by mac80211 itself.

Add a definition of the amount of TX headroom reserved by mac80211 itself
for its own purposes. Also add BUILD_BUG_ON to validate the value.
This define can then be used by drivers to request additional TX headroom
in the most efficient manner.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agort2x00: Fix rt2800usb detection in rt2800lib.
Gertjan van Wingerde [Mon, 14 Dec 2009 19:09:49 +0000 (14:09 -0500)]
rt2x00: Fix rt2800usb detection in rt2800lib.

rt2800lib incorrectly detected whether RT2800USB was enabled because
it didn't account for a modularized RT2800USB driver.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoipvs: fix synchronization on connection close
Xiaotian Feng [Mon, 14 Dec 2009 15:38:21 +0000 (16:38 +0100)]
ipvs: fix synchronization on connection close

commit 9d3a0de makes slaves expire as they would do on the master
with much shorter timeouts. But it introduces another problem:
When we close a connection, on master server the connection became
CLOSE_WAIT/TIME_WAIT, it was synced to slaves, but if master is
finished within it's timeouts (CLOSE), it will not be synced to
slaves. Then slaves will be kept on CLOSE_WAIT/TIME_WAIT until
timeout reaches. Thus we should also sync with CLOSE.

Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
15 years agonetfilter: xtables: document minimal required version
Jan Engelhardt [Mon, 14 Dec 2009 13:52:10 +0000 (14:52 +0100)]
netfilter: xtables: document minimal required version

For both .33 and .32-stable.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
15 years agodrivers/net/bonding/: : use pr_fmt
Joe Perches [Mon, 14 Dec 2009 04:06:07 +0000 (20:06 -0800)]
drivers/net/bonding/: : use pr_fmt

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from pr_<level>s
Consolidate long format strings
Remove some extra tab indents
Remove some unnecessary ()s from pr_<level>s arguments
Align pr_<level> arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocan: CAN_MCP251X should depend on HAS_DMA
Geert Uytterhoeven [Sun, 13 Dec 2009 09:11:06 +0000 (09:11 +0000)]
can: CAN_MCP251X should depend on HAS_DMA

When building for Sun 3:

drivers/net/can/mcp251x.c:1074: undefined reference to `dma_free_coherent'
drivers/net/can/mcp251x.c:976: undefined reference to `dma_alloc_coherent'
drivers/net/can/mcp251x.c:1050: undefined reference to `dma_free_coherent'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodrivers/net/usb: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 05:47:04 +0000 (05:47 +0000)]
drivers/net/usb: Correct code taking the size of a pointer

sizeof(dev->dev_addr) is the size of a pointer.  A few lines above, the
size of this field is obtained using netdev->addr_len for a call to memcpy,
so do the same here.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodrivers/net/cpmac.c: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 05:35:45 +0000 (05:35 +0000)]
drivers/net/cpmac.c: Correct code taking the size of a pointer

sizeof(dev->dev_addr) is the size of a pointer.  On the other hand,
sizeof(pdata->dev_addr) is the size of an array, so use that instead.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodrivers/net/sfc: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 01:41:29 +0000 (01:41 +0000)]
drivers/net/sfc: Correct code taking the size of a pointer

The function efx_iterate_state contains the code
memcpy(&payload->msg, payload_msg, sizeof(payload_msg));
This is the only use of payload_msg.  The type of payload_msg is
changed from a pointer to an array, so that the result of sizeof really is
the length of the string.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodrivers/atm: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 01:40:55 +0000 (01:40 +0000)]
drivers/atm: Correct code taking the size of a pointer

sizeof(TstSchedTbl) is just the size of the pointer.  Change it to the size
of the referenced data.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years ago3c574_cs: disable irq before calling el3_interrupt
Ken Kawasaki [Sat, 12 Dec 2009 14:44:11 +0000 (14:44 +0000)]
3c574_cs: disable irq before calling el3_interrupt

3c574_cs, 3c589_cs:
disable irq before calling el3_interrupt
in the media_check function.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agomlx4_core: return a negative error value
roel kluin [Sat, 12 Dec 2009 09:09:05 +0000 (09:09 +0000)]
mlx4_core: return a negative error value

The return value should be negative.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocan: Fix data length code handling in rx path
Oliver Hartkopp [Sat, 12 Dec 2009 04:13:21 +0000 (04:13 +0000)]
can: Fix data length code handling in rx path

A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes.

When reading the CAN controllers register the 4-bit value may contain values
from 0 .. 15 which may exceed the reserved space in the socket buffer!

The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8
should be reduced to 8 without any error reporting or frame drop.

This patch introduces a new helper macro to cast a given 4-bit data length
code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes.

The different handlings in the rx path of the CAN netdevice drivers are fixed.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Fix userspace RTM_NEWLINK notifications.
Eric W. Biederman [Sat, 12 Dec 2009 22:11:15 +0000 (22:11 +0000)]
net: Fix userspace RTM_NEWLINK notifications.

I received some bug reports about userspace programs having problems
because after RTM_NEWLINK was received they could not immediate access
files under /proc/sys/net/ because they had not been registered yet.

The original problem was trivially fixed by moving the userspace
notification from rtnetlink_event() to the end of
register_netdevice().

When testing that change I discovered I was still getting RTM_NEWLINK
events before I could access proc and I was also getting RTM_NEWLINK
events after I was seeing RTM_DELLINK.  Things practically guaranteed
to confuse userspace.

After a little more investigation these extra notifications proved to
be from the new notifiers NETDEV_POST_INIT and NETDEV_UNREGISTER_BATCH
hitting the default case in rtnetlink_event, and triggering
unnecessary RTM_NEWLINK messages.

rtnetlink_event now explicitly handles NETDEV_UNREGISTER_BATCH and
NETDEV_POST_INIT to avoid sending the incorrect userspace
notifications.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoudp: udp_lib_get_port() fix
Eric Dumazet [Mon, 14 Dec 2009 03:32:39 +0000 (19:32 -0800)]
udp: udp_lib_get_port() fix

Now we can have a large udp hash table, udp_lib_get_port() loop
should be converted to a do {} while (cond) form,
or we dont enter it at all if hash table size is exactly 65536.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobe2net: fix error in rx completion processing.
Ajit Khaparde [Sat, 12 Dec 2009 06:59:09 +0000 (22:59 -0800)]
be2net: fix error in rx completion processing.

There are certain skews of the NIC which have multiple bits set in
adapter->cap.  Use & instead of == to process rx completions.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoigbvf: avoid reset storms due to mailbox issues
Alexander Duyck [Sat, 12 Dec 2009 06:58:14 +0000 (22:58 -0800)]
igbvf: avoid reset storms due to mailbox issues

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it so that reset/interrupt storms can be avoided when
there are mailbox issues.  The new behavior is to only allow the device to
trigger mailbox related resets only once every 10 seconds.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoigb: fix handling of mailbox collisions between PF/VF
Alexander Duyck [Sat, 12 Dec 2009 06:57:34 +0000 (22:57 -0800)]
igb: fix handling of mailbox collisions between PF/VF

This patch changes the handling of collisions between the use of the
PF/VF sides of the mailbox.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agousb: remove rare pm primitive for conversion to new API
Oliver Neukum [Sat, 12 Dec 2009 05:43:00 +0000 (21:43 -0800)]
usb: remove rare pm primitive for conversion to new API

This patch removes a rare use of the USB power management API which
won't be supported after the conversion to the new generic runtime power
management framework. Functionality is not altered.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Sat, 12 Dec 2009 01:12:17 +0000 (17:12 -0800)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
include/net/tcp.h

15 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Fri, 11 Dec 2009 23:59:23 +0000 (15:59 -0800)]
Merge branch 'next' of git://git./linux/kernel/git/davej/cpufreq

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface
  [CPUFREQ] make internal cpufreq_add_dev_* static
  [CPUFREQ] use an enum for speedstep processor identification
  [CPUFREQ] Document units for transition latency
  [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings
  [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/
  [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used
  [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c

15 years agoStaging: batman: fix debug Kconfig option
Greg Kroah-Hartman [Fri, 11 Dec 2009 23:40:17 +0000 (15:40 -0800)]
Staging: batman: fix debug Kconfig option

The debug batman option needs to depend on the correct
config option.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ "No means no!"  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>