GitHub/moto-9609/android_kernel_motorola_exynos9610.git
10 years agonet: cdc_ncm: use sysfs for rx/tx aggregation tuning
Bjørn Mork [Fri, 30 May 2014 07:31:06 +0000 (09:31 +0200)]
net: cdc_ncm: use sysfs for rx/tx aggregation tuning

Attach a driver specific sysfs group to the netdev, and use it
for the rx/tx aggregation variables.

The datagram aggregation defined by the CDC NCM specification is
specific to this device class (including CDC MBIM). Using the
ethtool interrupt coalesce API as an interface to the aggregation
parameters redefined that API in a driver specific and confusing
way.  A sysfs group
 - makes it clear that this is a driver specific userspace API, and
 - allows us to export the real values instead of some translated
   version, and
 - lets us include more aggregation variables which were impossible
   to force into the ethtool API.

Additionally, using sysfs allows tuning the driver on space
constrained hosts where userspace tools like ethtool are undesired.

Suggested-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: cdc_ncm: inform usbnet when rx buffers are reduced
Bjørn Mork [Fri, 30 May 2014 07:31:05 +0000 (09:31 +0200)]
net: cdc_ncm: inform usbnet when rx buffers are reduced

It doesn't matter whether the buffer size goes up or down.  We have to
keep usbnet and device syncronized to be able to split transfers at the
correct boundaries. The spec allow skipping short packets when using
max sized transfers.  If we don't tell usbnet about our new expected rx
buffer size, then it will merge and/or split NTBs.  The driver does not
support this, and the result will be lots of framing errors.

Fix by always reallocating usbnet rx buffers when the rx_max value
changes.

Fixes: 68864abf08f0 ("net: cdc_ncm: support rx_max/tx_max updates when running")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: cdc_ncm: always reallocate tx_curr_skb when tx_max increases
Bjørn Mork [Fri, 30 May 2014 07:31:04 +0000 (09:31 +0200)]
net: cdc_ncm: always reallocate tx_curr_skb when tx_max increases

We are calling usbnet_start_xmit() to flush any remaining data,
depending on the side effect that tx_curr_skb is set to NULL,
ensuring a new allocation using the updated tx_max.  But this
side effect will only happen if there were any cached data ready
to transmit. If not, then an empty tx_curr_skb is still allocated
using the old tx_max size. Free it to avoid a buffer overrun.

Fixes: 68864abf08f0 ("net: cdc_ncm: support rx_max/tx_max updates when running")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: cdc_ncm: reduce skb truesize in rx path
Bjørn Mork [Fri, 30 May 2014 07:31:03 +0000 (09:31 +0200)]
net: cdc_ncm: reduce skb truesize in rx path

Cloning the big skbs we use for USB buffering chokes up TCP and
SCTP because the socket memory limits are hitting earlier than
they should. It is better to unconditionally copy the unwrapped
packets to freshly allocated skbs.

Reported-by: Jim Baxter <jim_baxter@mentor.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agomacvlan: fix the problem when mac address changes for passthru mode
dingtianhong [Fri, 30 May 2014 06:32:49 +0000 (14:32 +0800)]
macvlan: fix the problem when mac address changes for passthru mode

The macvlan dev should always have the same mac address like lowerdev
when in the passthru mode, change the mac address alone will break the
work mechanism, so when the lowerdev or macvlan mac address changes,
we should propagate the changes to another dev.

v1->v2: Allow macvlan dev to change mac address for passthru mode and propagate to
lowerdev.

v2->v3: Don't set the mac address to the lower dev's unicast address for
passthru mode when mac address changes.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: stmmac: Handle different error codes from platform_get_irq_byname
Chen-Yu Tsai [Thu, 29 May 2014 14:31:40 +0000 (22:31 +0800)]
net: stmmac: Handle different error codes from platform_get_irq_byname

The following patch moved device tree interrupt resolution into
platform_get_irq_byname:

  ad69674 of/irq: do irq resolution in platform_get_irq_byname()

As a result, the function no longer only return -ENXIO on error.
This breaks DT based probing of stmmac, as seen in test runs of
linux-next next-20140526 cubie2-sunxi_defconfig:

  http://lists.linaro.org/pipermail/kernel-build-reports/2014-May/003659.html

This patch makes the stmmac_platform probe function properly handle
error codes, such as returning for deferred probing, and other codes
returned by of_irq_get_by_name.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Mon, 2 Jun 2014 18:17:35 +0000 (11:17 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-06-02

Please pull this remaining batch of updates intended for the 3.16 stream...

For the mac80211 bits, Johannes says:

"The remainder for -next right now is mostly fixes, and a handful of
small new things like some CSA infrastructure, the regdb script mW/dBm
conversion change and sending wiphy notifications."

For the bluetooth bits, Gustavo says:

"Some more patches for 3.16. There is nothing really special here, just a
bunch of clean ups, fixes plus some small improvements. Please pull."

For the nfc bits, Samuel says:

"We have:

- Felica (Type3) tags support for trf7970a
- Type 4b tags support for port100
- st21nfca DTS typo fix
- A few sparse warning fixes"

For the atheros bits, Kalle says:

"Ben added support for setting antenna configurations. Michal improved
warm reset so that we would not need to fall back to cold reset that
often, an issue where ath10k stripped protected flag while in monitor
mode and made module initialisation asynchronous to fix the problems
with firmware loading when the driver is linked to the kernel.

Luca removed unused channel_switch_beacon callbacks both from ath9k and
ath10k. Marek fixed Protected Management Frames (PMF) when using Action
Frames. Also we had other small fixes everywhere in the driver."

Along with that, there are a handful of updates to a variety
of drivers.  This includes updates to at76c50x-usb, ath9k, b43,
brcmfmac, mwifiex, rsi, rtlwifi, and wil6210.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoinetpeer: get rid of ip_id_count
Eric Dumazet [Mon, 2 Jun 2014 12:26:03 +0000 (05:26 -0700)]
inetpeer: get rid of ip_id_count

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoof: of_mdio: export symbol of_mdiobus_link_phydev
Daniel Mack [Mon, 2 Jun 2014 11:32:46 +0000 (13:32 +0200)]
of: of_mdio: export symbol of_mdiobus_link_phydev

Make of_mdiobus_link_phydev externally available.
This fixes CONFIG_OF_MDIO=m.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 86f6cf41272 ("net: of_mdio: add of_mdiobus_link_phydev()")
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: of_mdio: use int type for address variable
Daniel Mack [Mon, 2 Jun 2014 11:32:45 +0000 (13:32 +0200)]
net: of_mdio: use int type for address variable

Use int rather than u32 to fix the following warning:

drivers/of/of_mdio.c:147 of_mdiobus_register() warn: unsigned 'addr' is
never less than zero.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Fixes: 8f8382888cba ("net: of_mdio: factor out code to parse a phy's 'reg' property")
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'netdevsync'
David S. Miller [Mon, 2 Jun 2014 17:41:30 +0000 (10:41 -0700)]
Merge branch 'netdevsync'

Alexander Duyck says:

====================
Provide common means for device address sync

The following series implements a means for synchronizing both unicast and
multicast addresses on a device interface.  The code is based on the original
implementation of dev_uc_sync that was available for syncing a VLAN to the
lower dev.

The original reason for coming up for this patch is a driver that is still in
the early stages of development.  The nearest driver I could find that
appeared to have the same limitations as the driver I was working on was the
Cisco enic driver.  For this reason I chose it as the first driver to make use
of this interface publicly.

However, I do not have a Cisco enic interface so I have only been able to
compile test any changes made to the driver.  I tried to keep this change as
simple as possible to avoid any issues.  Any help with testing would be
greatly appreciated.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoenic: Update driver to use __dev_uc/mc_sync/unsync calls
Alexander Duyck [Thu, 29 May 2014 01:44:52 +0000 (18:44 -0700)]
enic: Update driver to use __dev_uc/mc_sync/unsync calls

This change updates the enic driver to make use of __dev_uc_sync and
__dev_mc_sync calls.  Previously the driver was doing its own list
management by storing the mc_addr and uc_addr list in a 32 address array.
With this change the sync data is stored in the netdev_addr_list structures
and instead we just track how many addresses we have written to the device.
When we encounter 32 we stop and print a message as occurred previously with
the old approach.

Other than the core change the only other bit needed was to propagate the
constant attribute with the MAC address as there were several spots where
is twas only passed as a u8 * instead of a const u8 *.

This patch is meant to maintain the original functionality without the use
of the mc_addr and uc_addr arrays.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: Add support for device specific address syncing
Alexander Duyck [Thu, 29 May 2014 01:44:46 +0000 (18:44 -0700)]
net: Add support for device specific address syncing

This change provides a function to be used in order to break the
ndo_set_rx_mode call into a set of address add and remove calls.  The code
is based on the implementation of dev_uc_sync/dev_mc_sync.  Since they
essentially do the same thing but with only one dev I simply named my
functions __dev_uc_sync/__dev_mc_sync.

I also implemented an unsync version of the functions as well to allow for
cleanup on close.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch '6lowpan-next'
David S. Miller [Mon, 2 Jun 2014 17:39:52 +0000 (10:39 -0700)]
Merge branch '6lowpan-next'

Alexander Aring says:

====================
6lowpan: fragmentation fixes

This patch series fix the 6LoWPAN fragmentation which are in two cases broken.

The first case is if we have exactly two 6LoWPAN fragments only. This is fixed
by patch "6lowpan_rtnl: fix fragmentation with two fragments".
The second case is a off by one issue if we have payload which hits the fragment
boundary.

Both issues are introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7
("6lowpan: fix fragmentation").
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years ago6lowpan_rtnl: fix off by one while fragmentation
Alexander Aring [Mon, 2 Jun 2014 11:21:58 +0000 (13:21 +0200)]
6lowpan_rtnl: fix off by one while fragmentation

This patch fix a off by one error while fragmentation. If the frag_cap
value is equal to skb_unprocessed value we need to stop the
fragmentation loop because the last fragment which has a size of
skb_unprocessed fits into the frag capability size.

This issue was introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7
("6lowpan: fix fragmentation").

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years ago6lowpan_rtnl: fix fragmentation with two fragments
Alexander Aring [Mon, 2 Jun 2014 11:21:57 +0000 (13:21 +0200)]
6lowpan_rtnl: fix fragmentation with two fragments

This patch fix the 6LoWPAN fragmentation for the case if we have exactly
two fragments. The problem is that the (skb_unprocessed >= frag_cap)
condition is always false on the second fragment after sending the first
fragment. A fragmentation with only one fragment doesn't make any sense.
The solution is that we use a do while loop here, that ensures we sending
always a minimum of two fragments if we need a fragmentation.

This issue was introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7
("6lowpan: fix fragmentation").

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agostmmac: Remove spin_lock call in stmmac_get_pauseparam()
Emil Goode [Mon, 2 Jun 2014 09:30:50 +0000 (11:30 +0200)]
stmmac: Remove spin_lock call in stmmac_get_pauseparam()

The following patch removed unnecessary spin_lock/unlock calls
in ethtool_ops callback functions. In the second and final version
of the patch one spin_lock call was left behind.

commit cab6715c3e8029e98b0b5d4056ceda007c0f6380
Author: Yang Wei <Wei.Yang@windriver.com>
Date:   Sun May 25 09:53:44 2014 +0800

    net: driver: stmicro: Remove some useless the lock protection

This introduced the following sparse warning:

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:424:1: warning:
context imbalance in 'stmmac_get_pauseparam' -
different lock contexts for basic block

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: remove superfluous assignment
Denis ChengRq [Mon, 2 Jun 2014 08:18:01 +0000 (01:18 -0700)]
genetlink: remove superfluous assignment

the local variable ops and n_ops were just read out from family,
and not changed, hence no need to assign back.

Validation functions should operate on const parameters and not
change anything.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Mon, 2 Jun 2014 15:20:17 +0000 (11:20 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

10 years agoRevert "net/mlx4_en: Use affinity hint"
David S. Miller [Mon, 2 Jun 2014 07:18:48 +0000 (00:18 -0700)]
Revert "net/mlx4_en: Use affinity hint"

This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61.

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: ks8851: Don't use regulator_get_optional()
Stephen Boyd [Wed, 28 May 2014 20:11:12 +0000 (13:11 -0700)]
net: ks8851: Don't use regulator_get_optional()

We shouldn't be using regulator_get_optional() here. These
regulators are always present as part of the physical design and
there isn't any way to use an internal regulator or change the
source of the reference voltage via software. Given that the only
users of this driver in the kernel are DT based, this change
should be transparent to them even if they don't specify any
supplies because the regulator framework will insert dummy
supplies as needed.

Cc: Nishanth Menon <nm@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'filter-next'
David S. Miller [Mon, 2 Jun 2014 05:17:21 +0000 (22:17 -0700)]
Merge branch 'filter-next'

Daniel Borkmann says:

====================
BPF + test suite updates

These are the last bigger BPF changes that I had in my todo
queue for now. As the first two patches from this series
contain additional test cases for the test suite, I have
rebased them on top of current net-next with the set from [1]
applied to avoid introducing any unnecessary merge conflicts.

For details, please refer to the individual patches. Test
suite runs fine with the set applied.

 [1] http://patchwork.ozlabs.org/patch/352599/
     http://patchwork.ozlabs.org/patch/352600/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: improve filter block macros
Daniel Borkmann [Thu, 29 May 2014 08:22:51 +0000 (10:22 +0200)]
net: filter: improve filter block macros

Commit 9739eef13c92 ("net: filter: make BPF conversion more readable")
started to introduce helper macros similar to BPF_STMT()/BPF_JUMP()
macros from classic BPF.

However, quite some statements in the filter conversion functions
remained in the old style which gives a mixture of block macros and
non block macros in the code. This patch makes the block macros itself
more readable by using explicit member initialization, and converts
the remaining ones where possible to remain in a more consistent state.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: get rid of BPF_S_* enum
Daniel Borkmann [Thu, 29 May 2014 08:22:50 +0000 (10:22 +0200)]
net: filter: get rid of BPF_S_* enum

This patch finally allows us to get rid of the BPF_S_* enum.
Currently, the code performs unnecessary encode and decode
workarounds in seccomp and filter migration itself when a filter
is being attached in order to overcome BPF_S_* encoding which
is not used anymore by the new interpreter resp. JIT compilers.

Keeping it around would mean that also in future we would need
to extend and maintain this enum and related encoders/decoders.
We can get rid of all that and save us these operations during
filter attaching. Naturally, also JIT compilers need to be updated
by this.

Before JIT conversion is being done, each compiler checks if A
is being loaded at startup to obtain information if it needs to
emit instructions to clear A first. Since BPF extensions are a
subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements
for extensions can be removed at that point. To ease and minimalize
code changes in the classic JITs, we have introduced bpf_anc_helper().

Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int),
arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we
unfortunately didn't have access, but changes are analogous to
the rest.

Joint work with Alexei Starovoitov.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Chema Gonzalez <chemag@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: add test for loading SKF_AD_OFF limits
Daniel Borkmann [Thu, 29 May 2014 08:22:49 +0000 (10:22 +0200)]
net: filter: add test for loading SKF_AD_OFF limits

This check tests that overloading BPF_LD | BPF_ABS with an
always invalid BPF extension, that is SKF_AD_MAX, fails to
make sure classic BPF behaviour is correct in filter checker.

Also, we add a test for loading at packet offset SKF_AD_OFF-1
which should pass the filter, but later on fail during runtime.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: add slot overlapping test with fully filled M[]
Daniel Borkmann [Thu, 29 May 2014 08:22:48 +0000 (10:22 +0200)]
net: filter: add slot overlapping test with fully filled M[]

Also add a test for the scratch memory store that first fills
all slots and then sucessively reads all of them back adding
up to A, and eventually returning A. This and the previous
M[] test with alternating fill/spill will detect possible JIT
errors on M[].

Suggested-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobridge: fix the unbalanced promiscuous count when add_if failed
wangweidong [Thu, 29 May 2014 02:15:30 +0000 (10:15 +0800)]
bridge: fix the unbalanced promiscuous count when add_if failed

As commit 2796d0c648c94 ("bridge: Automatically manage port
promiscuous mode."), make the add_if use dev_set_allmulti
instead of dev_set_promiscuous, so when add_if failed, we
should do dev_set_allmulti(dev, -1).

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: Revert mlx4 cpumask changes.
David S. Miller [Mon, 2 Jun 2014 04:58:02 +0000 (21:58 -0700)]
net: Revert mlx4 cpumask changes.

This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61
("net/mlx4_en: Use affinity hint") and commit
c8865b64b05b2f4eeefd369373e9c8aeb069e7a1 ("cpumask: Utility function
to set n'th cpu - local cpu first") because these changes break
the build when SMP is disabled amongst other things.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: ks8851: Don't use regulator_get_optional()
Stephen Boyd [Wed, 28 May 2014 20:11:12 +0000 (13:11 -0700)]
net: ks8851: Don't use regulator_get_optional()

We shouldn't be using regulator_get_optional() here. These
regulators are always present as part of the physical design and
there isn't any way to use an internal regulator or change the
source of the reference voltage via software. Given that the only
users of this driver in the kernel are DT based, this change
should be transparent to them even if they don't specify any
supplies because the regulator framework will insert dummy
supplies as needed.

Cc: Nishanth Menon <nm@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'mlx4-next'
David S. Miller [Mon, 2 Jun 2014 02:17:18 +0000 (19:17 -0700)]
Merge branch 'mlx4-next'

Amir Vadai says:

====================
cpumask,net: Affinity hint helper function

This patchset will set affinity hint to influence IRQs to be allocated on the
same NUMA node as the one where the card resides. As discussed in
http://www.spinics.net/lists/netdev/msg271497.html

If the number of IRQs allocated is greater than the number of local NUMA cores, all
local cores will be used first, and the rest of the IRQs will be on a remote
NUMA node.
If no NUMA support - IRQ's and cores will be mapped 1:1

Since the utility function to calculate the mapping could be useful in other mq
drivers in the kernel, it was added to cpumask.[ch]

This patchset was tested and applied on top of net-next since the first
consumer is a network device (mlx4_en).  Over commit 506724c: "tg3: Override
clock, link aware and link idle mode during NVRAM dump"

I couldn't find a maintainer for cpumask.c, so only added the kernel mailing
list

Amir

Changes from V5:
- Moved the utility function from kernel/irq/manage.c to lib/cpumask.c, and
  renamed it's name accordingly to cpumask_set_cpu_local_first()
- Added some comments as Thomas Gleixner suggested
- Changed -EINVAL to -EAGAIN, that describes the error situtation better.

Changes from V4:
- Patch 1/2: irq: Utility function to get affinity_hint by policy
  Thank you Ben for the great review:
  - Moved the function it kernel/irq/manage.c since it could be useful for
    block mq devices
  - Fixed Typo's
  - Use cpumask_t * instead of cpumask_var_t in function header
  - Restructured the function to remove NULL assignment in a cpumask_var_t
  - Fix for offline local CPU's

Changes from V3:
- Patch 2/2: net/mlx4_en: Use affinity hint
  - somehow patch file was corrupted

Changes from V2:
- Patch 1/2: net: Utility function to get affinity_hint by policy
  - Fixed style issues

Changes from V1:
- Patch 1/2: net: Utility function to get affinity_hint by policy
  - Fixed error flow to return -EINVAL on error (thanks govind)
- Patch 2/2: net/mlx4_en: Use affinity hint
  - Set ring->affinity_hint to NULL on error

Changes from V0:
- Fixed small style issues
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet/mlx4_en: Use affinity hint
Yuval Atias [Sun, 25 May 2014 14:47:27 +0000 (17:47 +0300)]
net/mlx4_en: Use affinity hint

The “affinity hint” mechanism is used by the user space
daemon, irqbalancer, to indicate a preferred CPU mask for irqs.
Irqbalancer can use this hint to balance the irqs between the
cpus indicated by the mask.

We wish the HCA to preferentially map the IRQs it uses to numa cores
close to it.  To accomplish this, we use cpumask_set_cpu_local_first(), that
sets the affinity hint according the following policy:
First it maps IRQs to “close” numa cores.  If these are exhausted, the
remaining IRQs are mapped to “far” numa cores.

Signed-off-by: Yuval Atias <yuvala@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agocpumask: Utility function to set n'th cpu - local cpu first
Amir Vadai [Sun, 25 May 2014 14:47:26 +0000 (17:47 +0300)]
cpumask: Utility function to set n'th cpu - local cpu first

This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set

Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
David S. Miller [Sat, 31 May 2014 00:54:47 +0000 (17:54 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

This small patchset contains three accumulated Netfilter/IPVS updates,
they are:

1) Refactorize common NAT code by encapsulating it into a helper
   function, similarly to what we do in other conntrack extensions,
   from Florian Westphal.

2) A minor format string mismatch fix for IPVS, from Masanari Iida.

3) Add quota support to the netfilter accounting infrastructure, now
   you can add quotas to accounting objects via the nfnetlink interface
   and use them from iptables. You can also listen to quota
   notifications from userspace. This enhancement from Mathieu Poirier.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sat, 31 May 2014 00:51:27 +0000 (17:51 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e and i40evf.

Kevin updates the i40e and i40evf driver i40e_check_asq_alive() to ensure
the length register offset is non-zero which indicates that the software
has initialized the admin queue.  Also removes PCTYPE definitions which are
now reserved.

Mitch enables descriptor prefetch for rings belonging to the virtual function.
Also configures the VF minimum transmit rate to 50 Mbps rather than 0 which was
be interpreted as no limit at all.  Mitch found in order for the VF to achieve
its programmed transmit rate, we need to set the max credit value to 4.
Lastly fixes a Tx hang and firmware crash that happens after setting the MTU
on a VF by not using the RESETTING state during reinit, this is because
the RESETTING state means that a catastrophic hardware bad thing is happening
and the driver needs to tiptoe around and not use the admin queue or registers.
A reinit is no big deal and we can use the admin queue (and we should) so
do not set the state to RESETTING during reinit to resolve the bug.

Akeem changes the declaration of the transmit and receive rings inside
several loops to eliminate declaring the same ring every time for the
duration of the loop and declares them just once before the loop.  Also fixes
the driver to clear the recovery pending bit if pf_reset fails instead of
falling through the setup process.

Anjali makes a change based on feedback from Ben Hutchings that cmd->data
needs to be reported in ETHTOOL_GRXCLSRLCNT and use a helper function to
calculate the total filter count.

Jesse removes storm control since the storm control features are not apart
of the hardware and were mistakenly left in the code.

Greg changes tx_lpi_status and rx_lpi_status from bool to u32 to avoid
sparse errors.

Shannon adds the clear_pxe AdminQ API call to tell the firmware that the
driver is taking over from PXE.  In addition, relaxes the firmware API
check to allow more flexibility in handling newer NICs and NVMs in the field.

Vasu ensures that FCoE is disabled for MFP modes since it is not supported
by overriding the hardware FCoE capability.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoaf_key: Replace comma with semicolon
Himangi Saraogi [Fri, 30 May 2014 15:48:12 +0000 (21:18 +0530)]
af_key: Replace comma with semicolon

This patch replaces a comma between expression statements by a semicolon.

A simplified version of the semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2,e;
type T;
identifier i;
@@

 e1
-,
+;
 e2;
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agords/tcp_listen: Replace comma with semicolon
Himangi Saraogi [Fri, 30 May 2014 15:47:13 +0000 (21:17 +0530)]
rds/tcp_listen: Replace comma with semicolon

This patch replaces a comma between expression statements by a semicolon.

A simplified version of the semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2,e;
type T;
identifier i;
@@

 e1
-,
+;
 e2;
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoRDS/RDMA: Replace comma with semicolon
Himangi Saraogi [Fri, 30 May 2014 15:46:05 +0000 (21:16 +0530)]
RDS/RDMA: Replace comma with semicolon

This patch replaces a comma between expression statements by a semicolon.

A simplified version of the semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2,e;
type T;
identifier i;
@@

 e1
-,
+;
 e2;
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipmr: Replace comma with semicolon
Himangi Saraogi [Fri, 30 May 2014 15:40:48 +0000 (21:10 +0530)]
ipmr: Replace comma with semicolon

This patch replaces a comma between expression statements by a semicolon.

A simplified version of the semantic patch that performs this
transformation is as follows:

// <smpl>
@r@
expression e1,e2,e;
type T;
identifier i;
@@

 e1
-,
+;
 e2;
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 's390-next'
David S. Miller [Sat, 31 May 2014 00:35:32 +0000 (17:35 -0700)]
Merge branch 's390-next'

Frank Blaschka says:

====================
s390: network patches for net-next V1

here are some s390 related patches for net-next
Added some style fixing reported by David Laight.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agos390/net: fix format string mismatches
Ursula Braun [Wed, 28 May 2014 08:22:31 +0000 (10:22 +0200)]
s390/net: fix format string mismatches

cppcheck blamed some issues in drivers/s390/net/...
They are fixed here.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqeth: Fix for possible null pointer dereference
Rickard Strandqvist [Wed, 28 May 2014 08:22:30 +0000 (10:22 +0200)]
qeth: Fix for possible null pointer dereference

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoaf_iucv: correct cleanup if listen backlog is full
Ursula Braun [Wed, 28 May 2014 08:22:29 +0000 (10:22 +0200)]
af_iucv: correct cleanup if listen backlog is full

In case of transport HIPER a sock struct is allocated for an incoming
connect request. If the backlog queue is full this socket is not
needed, but is left in the list of af_iucv sockets. Final socket
release posts console message "Attempt to release alive iucv socket".
This patch makes sure the new created socket is cleaned up correctly
if the backlog queue is full.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoaf_iucv: Add automatic (source) iucv_name to bind
Philipp Hachtmann [Wed, 28 May 2014 08:22:28 +0000 (10:22 +0200)]
af_iucv: Add automatic (source) iucv_name to bind

If a socket is bound to an address using before calling connect
it is usual to leave it to the network system to choose an appropriate
outgoing application name respective port address.
af_iucv on VM uses a counter and uses simple numbers as unique identifiers.
This behaviour was missing when af_iucv is used with HiperSockets.

This patch contains a simple approach to harmonize af_iucv's behaviour.

Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'be2net-next'
David S. Miller [Sat, 31 May 2014 00:27:39 +0000 (17:27 -0700)]
Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Patch 1 is a minor optimization for issuing multicast promisc FW cmd
only when the interface is not already in that mode.

Patch 2 provides support for VF TX-rate setting on Skyhawk-R.

Patch 3 provides support for flashing new FW flash regions.

Patches 4, 5, 6 cleanup the MCC processing (for FW cmds) code in be_cmds.c.
The MCC error reporting and event handling code are areas that needed
cleanup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: cleanup MCC async event processing code
Sathya Perla [Fri, 30 May 2014 13:36:28 +0000 (19:06 +0530)]
be2net: cleanup MCC async event processing code

The MCC async event processing code has 2 issues:
a) because of long struct names the code indentation is badly broken
b) description and definitions of how an MCC completion is interpreted as
   an async event are confusing (for e.g. the last word of an MCC event is
   named "code", while "code" is just a sub-field of the last word.)

This patch fixes the structure definitions, comments and re-factors code
as needed.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: move async cmd processing to a separate routine
Sathya Perla [Fri, 30 May 2014 13:36:27 +0000 (19:06 +0530)]
be2net: move async cmd processing to a separate routine

For some FW cmds, the caller just issues the cmd and doesn't wait for a
response. The response handling is done in the MCCQ compl processing context
only. Move this code into a separate routine to make be_mcc_compl_process()
more manageable.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: re-factor MCCQ error status handling code
Kalesh AP [Fri, 30 May 2014 13:36:26 +0000 (19:06 +0530)]
be2net: re-factor MCCQ error status handling code

This patch improves MCCQ error status handling in the following ways:
a) A MCC cmd completion returns a base-status and an addl-status.
So far, the routine be_mcc_compl_process() returned only the "status" value.
Now, embedd both statuses in the return value and let the caller routine access
the value of interest using base_status() and addl_status() macros.

b) Rename variables accordingly (base/addl) to avoid confusion while error
checking.

b) Some of the errors returned by FW are harmless and so an error msg is not
logged for such errors. Capture this logic in a separate routine to make the
code more readable.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: support flashing new regions on Skyhawk-R
Vasundhara Volam [Fri, 30 May 2014 13:36:25 +0000 (19:06 +0530)]
be2net: support flashing new regions on Skyhawk-R

Certain new flash regions have been added to Skyhawk-R FW image. The newer
FW images specify op_types for each region. A region is flashed only
when it's CRC doesn't match that of the region on the HW flash. While
upgrading to a new FW image the driver is expected to tolerate certain
errors.

This patch re-factors code under be_flash() to support the above scheme.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: fixup TX-rate setting code for Skyhawk-R
Ravikumar Nelavelli [Fri, 30 May 2014 13:36:24 +0000 (19:06 +0530)]
be2net: fixup TX-rate setting code for Skyhawk-R

Skyhawk-R FW supports TX-rate setting only as a % value of the link
speed, set via the SET_PROFILE_CONFIG cmd.

This patch makes the necessary changes to the FW cmd descriptors to support
the above change and also introduces checks in be_set_vf_tx_rate() to allow
only discrete values (that map to % of the link-speed).

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobe2net: skip multicast promiscuos setting in already set
Kalesh AP [Fri, 30 May 2014 13:36:23 +0000 (19:06 +0530)]
be2net: skip multicast promiscuos setting in already set

Set mc-promisc (multicast promiscuous) mode on an interface, only if it is
*not already* in that mode.

Also removed logs that report interface being set to multicast
promiscous mode. In an earlier comment on the netdev list such log messages
were deemed unnecessary as this behaviour is common across most of the
ethernet drivers.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Sat, 31 May 2014 00:18:46 +0000 (17:18 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of updates intended for 3.16...

For the mac80211 bits, Johannes says:

"Here I just have Heikki's rfkill GPIO cleanups.

The ARM/tegra patch is OK with the maintainer (Stephen). Let me know of
any problems."

and;

"We have a whole bunch of work on CSA by Andrei, Luca and Michal, but
unfortunately it doesn't seem quite complete yet so it's still disabled.
There's some TDLS work from Arik, and the rest is mostly minor fixes and
cleanups."

For the NFC bits, Samuel says:

"This is the NFC pull request for 3.16. We have:

- STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and
  thus relies on the HCI stack. This submission provides support for tag
  redaer/writer mode (including Type 5) and device tree bindings.

- PM runtime support and a bunch of bug fixes for TI's trf7970a.

- Device tree support for NXP's pn544. Legacy platform data support is
  obviously kept intact.

- NFC Tag type 4B support to the NFC Digital stack.

- SOCK_RAW type support to the raw NFC socket, and allow NCI
  sniffing from that. This can be extended to report HCI frames and also
  proprietarry ones like e.g. the pn533 ones."

For the iwlwifi bits, Emmanuel says:

"Eran continues to work on new devices, Eyal is still digging in
the rate control stuff, and Johannes added new functionality to the
debug system we have in place now along with a few cleanups he made
on the way.  That's pretty much it."

and;

"Avri continues to work on the power code and Eran is improving the
NVM handling as a preparations for new devices on which he works
with Liad. Luca cleans up a bit the code while working on CSA. I have
the regular BT Coex stuff and a small lockdep fix. Johannes has his
regular amount of clean ups and improvements, the main one is the
ability to leave 2 chains open to improve diversity and hence the
throughput in high attenuation scenarios."

and;

"The regular amount of housekeeping here. I merged iwlwifi-fixes.git to
be able to add the patch you didn't want in wireless.git at that stage
of the -rc cycle.  Luca has a few preparations for CSA implementation
and also what seems to be a bugfix for P2P but hasn't caused issues
we could notice."

For the Atheros bits, Kalle says:

"For ath10k Michal did various small fixes on how we handle
hardware/firmware problems and he also fixed two memory leaks."

Also included are a couple of pulls from the wireless tree to
avoid/resolve merge issues...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoatm: remove commented out check
Paul Bolle [Tue, 27 May 2014 15:07:12 +0000 (17:07 +0200)]
atm: remove commented out check

This preprocessor check is commented out ever since this file was added
during the v2.3 development cycle. It is unclear what it purpose might
have been. Whatever it was, it can safely be removed now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: tile: Remove unnecessary memset of netdev private data
Tobias Klauser [Tue, 27 May 2014 12:03:51 +0000 (14:03 +0200)]
net: tile: Remove unnecessary memset of netdev private data

The memory for private data is allocated using kzalloc/vzalloc in
alloc_netdev_mqs, thus there is no need to zero it again in the driver.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: tile: Use helpers from linux/etherdevice.h to check/set MAC
Tobias Klauser [Fri, 30 May 2014 07:47:17 +0000 (09:47 +0200)]
net: tile: Use helpers from linux/etherdevice.h to check/set MAC

Use is_zero_ether_addr() to check for the MAC address being all zeros instead of
open coding the check.

Also use ether_addr_copy() instead of a manual memcpy() to set the
netdev->dev_addr.

Furthermore, get rid of a redundant assignment of netdev->addr_len. This is
already set by ether_setup() which is called in tile_net_setup().

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobnx2x: update MAINTAINERS for bnx2x and e-mail addresses
Ariel Elior [Tue, 27 May 2014 10:11:36 +0000 (13:11 +0300)]
bnx2x: update MAINTAINERS for bnx2x and e-mail addresses

The bnx2x development team has transferred from Broadcom to Qlogic.
This patch updates some obsolete email addresses to usable ones.
The bnx2x files contain headers with legal information from
Broadcom. Qlogic Legal depratment is taking their time coming up
with their own legal info. So this patch only updates contact
information. I will follow up with a patch for the headers once I
have the required info.

Signed-off-by: Ariel Elior <ariel.elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: fec: use pinctrl PM helpers
Nimrod Andy [Tue, 27 May 2014 07:51:08 +0000 (15:51 +0800)]
net: fec: use pinctrl PM helpers

when system suspend, need to set pins to low power state to
save IO power consumption, there are three states of pinctrl:
"default", "idle" and "sleep". Currently enet supports default
and sleep state.

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: use block statements in tcpdump tests
Daniel Borkmann [Mon, 26 May 2014 18:17:35 +0000 (20:17 +0200)]
net: filter: use block statements in tcpdump tests

This patch converts raw opcodes for tcpdump tests into
BPF_STMT()/BPF_JUMP() combinations, which brings it into
conformity with the rest of the patches and it also makes
life easier to grasp what's going on in these particular
test cases when they ever fail. Also arrange payload from
the jump+holes test in a way as we have with other packet
payloads in the test suite.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: filter: test fill/spill of all M[] regs
Daniel Borkmann [Mon, 26 May 2014 18:17:34 +0000 (20:17 +0200)]
net: filter: test fill/spill of all M[] regs

This test for classic BPF probes stores and load combination
via X on all 16 registers of the scratch memory store. It
initially loads integer 100 and passes this value around
to each register while incrementing it every time, thus we
expect to have 116 as a result. Might be useful for JIT
testing.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: Use kmemdup instead of kmalloc + memcpy
Benoit Taine [Mon, 26 May 2014 15:21:23 +0000 (17:21 +0200)]
r8152: Use kmemdup instead of kmalloc + memcpy

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoenic: Fix 64 bit divide on 32bit system
Govindarajulu Varadarajan [Mon, 26 May 2014 10:22:43 +0000 (15:52 +0530)]
enic: Fix 64 bit divide on 32bit system

Division of a 32 bit number by a 64 bit number causes the following link
error introduced by
7c2ce6e60f703 "enic: Add support for adaptive interrupt coalescing"

drivers/built-in.o: In function `enic_poll_msix':
enic_main.c:(.text+0x48710a): undefined reference to `__udivdi3'
make: *** [vmlinux] Error 1

Since numerator is 32 bit, convert denominator to 32 bit accordingly.

Fixes: 7c2ce6e60f703 ("enic: Add support for adaptive interrupt coalescing")
Reported-by: Jim Davis <jim.epost@gmail.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Sujith Sankar <ssujith@cisco.com>
Cc: Neel Patel <neepatel@cisco.com>
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: tso: Export symbols for modular build
Sachin Kamat [Mon, 26 May 2014 09:22:46 +0000 (14:52 +0530)]
net: tso: Export symbols for modular build

Export the symbols to fix the below errors when built as modules:
ERROR: "tso_build_data" [drivers/net/ethernet/marvell/mvneta.ko] undefined!
ERROR: "tso_build_hdr" [drivers/net/ethernet/marvell/mvneta.ko] undefined!
ERROR: "tso_start" [drivers/net/ethernet/marvell/mvneta.ko] undefined!
ERROR: "tso_count_descs" [drivers/net/ethernet/marvell/mvneta.ko] undefined!
ERROR: "tso_build_data" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined!
ERROR: "tso_build_hdr" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined!
ERROR: "tso_start" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined!
ERROR: "tso_count_descs" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined!

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge tag 'linux-can-next-for-3.16-20140526' of git://gitorious.org/linux-can/linux...
David S. Miller [Fri, 30 May 2014 22:49:45 +0000 (15:49 -0700)]
Merge tag 'linux-can-next-for-3.16-20140526' of git://gitorious.org/linux-can/linux-can-next

Add new xilinx CAN driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoehea: Introduce the use of the managed version of kzalloc
Himangi Saraogi [Wed, 28 May 2014 14:23:09 +0000 (19:53 +0530)]
ehea: Introduce the use of the managed version of kzalloc

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Compile-Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agowil6210: improve debug for WMI receive
Vladimir Kondratiev [Thu, 29 May 2014 15:37:52 +0000 (18:37 +0300)]
wil6210: improve debug for WMI receive

Print message if no events received. This should not happen.
If it is, it points to the problem in firmware.
Track also cases when multiple events processed in one IRQ

Print information as soon as possible - mbox pointers and
event header right after reading it. This helps to identify potential
problem with memory allocation for the event buffer.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoMerge branch 'for-linville' of git://github.com/kvalo/ath
John W. Linville [Fri, 30 May 2014 17:43:31 +0000 (13:43 -0400)]
Merge branch 'for-linville' of git://github.com/kvalo/ath

10 years agoMerge tag 'nfc-next-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo...
John W. Linville [Fri, 30 May 2014 17:41:40 +0000 (13:41 -0400)]
Merge tag 'nfc-next-3.16-2' of git://git./linux/kernel/git/sameo/nfc-next

Samuel Ortiz <sameo@linux.intel.com> says:

"NFC: 3.16: Second pull request

This is the 2nd NFC pull request for 3.16. We have:

- Felica (Type3) tags support for trf7970a
- Type 4b tags support for port100
- st21nfca DTS typo fix
- A few sparse warning check fixes"

Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoMerge branch 'of_mdio'
David S. Miller [Thu, 29 May 2014 22:23:49 +0000 (15:23 -0700)]
Merge branch 'of_mdio'

Daniel Mack says:

====================
mdio: Parse DT nodes for auto-probed PHYs

Here's v2.

v1 -> v2:
* Switch to of_property_read_u32() in patch #1
* Check for mdio->dev_of_node in patch #2
* Added Florian's Reviewed-by: tags
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: of_mdio: don't store the length of a property if we don't need to
Daniel Mack [Sat, 24 May 2014 07:34:27 +0000 (09:34 +0200)]
net: of_mdio: don't store the length of a property if we don't need to

of_get_property() can be called with NULL as 2nd argument if the caller
is not interested in the length of a property. Use that here so we can
get rid of a variable.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: of_mdio: add of_mdiobus_link_phydev()
Daniel Mack [Sat, 24 May 2014 07:34:26 +0000 (09:34 +0200)]
net: of_mdio: add of_mdiobus_link_phydev()

Add a function to walk the list of subnodes of a mdio bus and look for
a node that matches the phy's address with its 'reg' property. If found,
set the of_node pointer for the phy. This allows auto-probed pyh
devices to be augmented by information passed in via DT.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: of_mdio: factor out code to parse a phy's 'reg' property
Daniel Mack [Sat, 24 May 2014 07:34:25 +0000 (09:34 +0200)]
net: of_mdio: factor out code to parse a phy's 'reg' property

Factor out some logic into of_mdio_parse_addr() so it can be reused
later. While at it, use of_property_read_u32() rather than open-coding
the same logic again.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agortlwifi: rtl8192cu: remove check for CONFIG_AUTOSUSPEND
Paul Bolle [Sat, 24 May 2014 05:46:06 +0000 (07:46 +0200)]
rtlwifi: rtl8192cu: remove check for CONFIG_AUTOSUSPEND

A check for CONFIG_AUTOSUSPEND was included in this driver when it was
added in v2.6.39. But that Kconfig symbol doesn't exist. Remove that
check and the single line it hides.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agortlwifi: rtl8723ae: Remove duplicate inclusion of fw_common.h
Sachin Kamat [Thu, 29 May 2014 11:09:24 +0000 (16:39 +0530)]
rtlwifi: rtl8723ae: Remove duplicate inclusion of fw_common.h

fw_common.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agortlwifi: rtl8723be: Remove duplicate inclusion of phy.h
Sachin Kamat [Thu, 29 May 2014 11:09:23 +0000 (16:39 +0530)]
rtlwifi: rtl8723be: Remove duplicate inclusion of phy.h

phy.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoath9k: Fix interface combinations for multi-channel concurrency
Rajkumar Manoharan [Thu, 29 May 2014 09:41:09 +0000 (15:11 +0530)]
ath9k: Fix interface combinations for multi-channel concurrency

Currently mac80211 does not support WDS and DFS with channel context
drivers. So advertise these features only when the driver is not
supporting channel context and modparam "use_chanctx" is introduced
for preparing channel context support in ath9k.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agomwifiex: change hscfg gap parameter to avoid potential firmware deadlock
Bing Zhao [Wed, 28 May 2014 04:39:34 +0000 (21:39 -0700)]
mwifiex: change hscfg gap parameter to avoid potential firmware deadlock

If host sleep parameter gap is set to 0xff, firmware will wait
for an ack from host to confirm the success of host wakeup.
This prevents firmware from uploading data packet before host
actually wakes up.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agomwifiex: set TDLS link for newly created RA list
Avinash Patil [Wed, 28 May 2014 04:39:33 +0000 (21:39 -0700)]
mwifiex: set TDLS link for newly created RA list

Current implementation sets tdls_link flag only while restoring
packets from TDLS queue. If traffic to peer starts after TDLS is
setup, there is no way to set TDLS link flag to true. Do this
while creating RA list and we confirm that there exist a TDLS
peer for which setup is complete.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agomwifiex: fix a crash in extended scan event processing
Avinash Patil [Wed, 28 May 2014 04:39:32 +0000 (21:39 -0700)]
mwifiex: fix a crash in extended scan event processing

[113.967694] Unable to handle kernel NULL pointer dereference
               at virtual address 00000020
............
[113.967859] PC is at mwifiex_update_rxreor_flags+0xfc/0x430
............
[113.968110] mwifiex_update_rxreor_flags+0xfc/0x430
[113.968129] mwifiex_handle_event_ext_scan_report+0x1e4/0x21c
[113.968148] mwifiex_process_sta_event+0x410/0x508
[113.968165] mwifiex_process_event+0x184/0x1e0
[113.968181] mwifiex_main_process+0x220/0x48c
[113.968197] mwifiex_sdio_interrupt+0xc8/0x1cc
[113.968210] sdio_irq_thread+0x11c/0x290

In case of legacy scan, adapter->curr_cmd is guranteed to be
non-NULL in check_next_scan_cmd. This may not be case in
extended scan where scan command response would come earlier and
set curr_cmd to NULL. Extended scan event comes later and while
trying to complete IOCTL for scan, driver would crash in
dereferencing adapter->curr_cmd->wait_q_enabled.

Avoid this by completing IOCTL in case of legacy scans only.
Internal scan would be completed while handling extended scan
command response.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agob43: N-PHY: optimize radio switching on/off
Rafał Miłecki [Tue, 27 May 2014 20:07:33 +0000 (22:07 +0200)]
b43: N-PHY: optimize radio switching on/off

Broadcom's wl 6.30.223.141 has some optimizations for radios 0x205[67].

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agob43: N-PHY: optimize init by doing some ops just once
Rafał Miłecki [Tue, 27 May 2014 20:07:32 +0000 (22:07 +0200)]
b43: N-PHY: optimize init by doing some ops just once

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agob43: PHY: allow init optimizations by tracking PHY state
Rafał Miłecki [Tue, 27 May 2014 20:07:31 +0000 (22:07 +0200)]
b43: PHY: allow init optimizations by tracking PHY state

PHY has to be often re-initialized (e.g. during band switching after PHY
reset), however some operations have to be performed only once (only
power reset affects them).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: optimize wil_release_reorder_frames
Vladimir Kondratiev [Tue, 27 May 2014 11:45:50 +0000 (14:45 +0300)]
wil6210: optimize wil_release_reorder_frames

In case of receiving frame with sequence number far greater than current,
wil_release_reorder_frames() will iterate many times over empty buffer.

Optimize this case by checking buffer emptiness and simply update
head_seq_num without iterating.

Suggested-by: Vladimir Shulman <Vladimir.Shulman@Wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: improve pointers printing
Vladimir Kondratiev [Tue, 27 May 2014 11:45:49 +0000 (14:45 +0300)]
wil6210: improve pointers printing

use proper format %pad for the dma_addr_t arguments;
prefix %p with 0x, as %p don't print is by itself

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: detect scan timeouts
Vladimir Kondratiev [Tue, 27 May 2014 11:45:48 +0000 (14:45 +0300)]
wil6210: detect scan timeouts

If scan has not finished in some reasonable time (10sec), interpret it as
if firmware error occurs but was not reported. Firmware should report
scan completion for every scan request, so it is error condition indeed.
Perform firmware recovery procedure.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: inline functions for vring hi/lo watermarks
Vladimir Kondratiev [Tue, 27 May 2014 11:45:46 +0000 (14:45 +0300)]
wil6210: inline functions for vring hi/lo watermarks

Provide clear definition of the watermarks for the vring descriptor space.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: limit fw error recovery attempts
Vladimir Kondratiev [Tue, 27 May 2014 11:45:45 +0000 (14:45 +0300)]
wil6210: limit fw error recovery attempts

In case there is something fundamentally wrong with the firmware
(example: RF cable disconnected), FW will always crash immediately
after reset. This leads to infinite fw error recovery loop.

Count consecutive unsuccessful error recovery attempts in a short period
of time, and stop doing recovery after some reasonable count.
It is still possible to manually reset fw doing
interface down/up sequence.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agowil6210: limit MTU
Vladimir Kondratiev [Tue, 27 May 2014 11:45:44 +0000 (14:45 +0300)]
wil6210: limit MTU

Obey 802.11 spec that defines max. data size 7920 bytes

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agoath9k: Fix deadlock while updating p2p beacon timer
Rajkumar Manoharan [Tue, 27 May 2014 11:28:02 +0000 (16:58 +0530)]
ath9k: Fix deadlock while updating p2p beacon timer

pm_lock is taken twice while syncing HW TSF of p2p vif.
Fix this by taking the lock at caller side.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: remove firmware list from USB driver
Arend van Spriel [Tue, 27 May 2014 10:56:28 +0000 (12:56 +0200)]
brcmfmac: remove firmware list from USB driver

The USB driver was using a list for firmware info that was
used in suspend/resume scenario. Now that brcmfmac is using
the asynchronous firmware request this is no longer needed.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: Remove interrupt endpoint usage from USB driver.
Hante Meuleman [Tue, 27 May 2014 10:56:27 +0000 (12:56 +0200)]
brcmfmac: Remove interrupt endpoint usage from USB driver.

The USB bus driver always configured an USB intr EP urb. The
driver did not use the result at all and with newer firmware it is
causing continues errors on this EP.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: Increase max buffer size for receiving control message from dongle
Daniel Kim [Tue, 27 May 2014 10:56:26 +0000 (12:56 +0200)]
brcmfmac: Increase max buffer size for receiving control message from dongle

The max buffer size for receiving control message from dongle needs to be
increased considering possible block padding. Otherwise some big control
message can't be received due to buffer overrun check.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Daniel Kim <dekim@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmutil: assure unused bits are cleared in 11n chanspec
Arend van Spriel [Tue, 27 May 2014 10:56:25 +0000 (12:56 +0200)]
brcmutil: assure unused bits are cleared in 11n chanspec

The firmware channel specification is a bitfield using a
16-bit integer, but only 14 lsb are used. Upon encoding
this value assure all 16 bits are cleared.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: make brcmf_fw_nvram_strip() static
Arend van Spriel [Tue, 27 May 2014 10:56:24 +0000 (12:56 +0200)]
brcmfmac: make brcmf_fw_nvram_strip() static

The function brcmf_fw_nvram_strip() is no longer called so
it does not need to be exposed.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: use asynchronous firmware request in USB
Arend van Spriel [Tue, 27 May 2014 10:56:23 +0000 (12:56 +0200)]
brcmfmac: use asynchronous firmware request in USB

This patch adds use of asynchronous firmware request to
the driver USB layer.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: use asynchronous firmware request in SDIO
Arend van Spriel [Tue, 27 May 2014 10:56:22 +0000 (12:56 +0200)]
brcmfmac: use asynchronous firmware request in SDIO

This patch adds use of asynchronous firmware request to
the driver SDIO layer.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: introduce asynchronous firmware loading
Arend van Spriel [Tue, 27 May 2014 10:56:21 +0000 (12:56 +0200)]
brcmfmac: introduce asynchronous firmware loading

The driver needs firmware to be loaded to the device, which
is done through the firmware class API. The synchronous call
request_firmware() need root filesystem to be mounted and/or
user-mode helper. These may not be avaliable on the moment
it is called. Instead use request_firmware_nowait().

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: Add log of superspeed device detection to USB probe.
Hante Meuleman [Tue, 27 May 2014 10:56:20 +0000 (12:56 +0200)]
brcmfmac: Add log of superspeed device detection to USB probe.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: rework usb callback operations
Arend van Spriel [Tue, 27 May 2014 10:56:19 +0000 (12:56 +0200)]
brcmfmac: rework usb callback operations

The resume callbacks do partly the same a the probe callback
so put common code in separate function for use in the callbacks.
This also fixes suspend/resume regression introduced by

    brcmfmac: remove .init() callback for internal bus interface

    The .init() callback was the first function called by the common
    bus function brcmf_bus_start(). Given that it is not really
    necessary and the bus layer can call it before calling the
    brcmf_bus_start() function.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: call brcmf_detach() unconditional in sdio .remove() callback
Arend van Spriel [Tue, 27 May 2014 10:56:18 +0000 (12:56 +0200)]
brcmfmac: call brcmf_detach() unconditional in sdio .remove() callback

The function brcmf_detach() checks whether it needs to do his stuff
or can return immediately. No need to have the same check in the
calling code.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: rename nvram.[ch] for upcoming firmware handling functions
Arend van Spriel [Tue, 27 May 2014 10:56:17 +0000 (12:56 +0200)]
brcmfmac: rename nvram.[ch] for upcoming firmware handling functions

The firmware processing will be modified to use asynchronous request
firmware api. In preparation this patch is simple rename of source
and header file to which the functionality will be added.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
10 years agobrcmfmac: remove .init() callback for internal bus interface
Arend van Spriel [Tue, 27 May 2014 10:56:16 +0000 (12:56 +0200)]
brcmfmac: remove .init() callback for internal bus interface

The .init() callback was the first function called by the common
bus function brcmf_bus_start(). Given that it is not really
necessary and the bus layer can call it before calling the
brcmf_bus_start() function.

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>