ipc/sem.c: avoid using spin_unlock_wait()

a) The ACQUIRE in spin_lock() applies to the read, not to the store, at
   least for powerpc.  This forces to add a smp_mb() into the fast path.

b) The memory barrier provided by spin_unlock_wait() is right now arch
   dependent.

Therefore: Use spin_lock()/spin_unlock() instead of spin_unlock_wait().

Advantage: faster single op semop calls(), observed +8.9% on x86.  (the
other solution would be arch dependencies in ipc/sem).

Disadvantage: slower complex op semop calls, if (and only if) there are
no sleeping operations.

The next patch adds hysteresis, this further reduces the probability
that the slow path is used.

Link: http://lkml.kernel.org/r/1476851896-3590-2-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <1vier1@web.de>
Cc: kernel test robot <xiaolong.ye@intel.com>
Cc: <felixh@informatik.uni-bremen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initramfs: finish fput() before accessing any binary from initramfs

Commit 4a9d4b024a31 ("switch fput to task_work_add") implements a
schedule_work() for completing fput(), but did not guarantee calling
__fput() after unpacking initramfs.  Because of this, there is a
possibility that during boot a driver can see ETXTBSY when it tries to
load a binary from initramfs as fput() is still pending on that binary.

This patch makes sure that fput() is completed after unpacking initramfs
and removes the call to flush_delayed_fput() in kernel_init() which
happens very late after unpacking initramfs.

Link: http://lkml.kernel.org/r/20170201140540.22051-1-lokeshvutla@ti.com
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reported-by: Murali Karicheri <m-karicheri2@ti.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/fonts/Kconfig: keep non-Sparc fonts listed together

Keep fonts together and indented (in menu) as much as possible.  This
moves the Sparc font choices to the end of the menu since they have
different dependencies.

Link: http://lkml.kernel.org/r/de6d8977-c6d6-a82d-c953-f2a2fefdb8a5@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

config: android-base: enable hardened usercopy and kernel ASLR

Enable CONFIG_HARDENED_USERCOPY and CONFIG_RANDOMIZE_BASE in Android
base config fragment.

Reviewed at https://android-review.googlesource.com/#/c/283659/
Reviewed at https://android-review.googlesource.com/#/c/278133/

Link: http://lkml.kernel.org/r/1481113148-29204-2-git-send-email-amit.pundir@linaro.org
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <rob.herring@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

config: android-recommended: disable aio support

The aio interface adds substantial attack surface for a feature that's
not being exposed by Android at all.  It's unlikely that anyone is using
the kernel feature directly either.  This feature is rarely used even on
servers.  The glibc POSIX aio calls really use thread pools.  The lack
of widespread usage also means this is relatively poorly audited/tested.

The kernel's aio rarely provides performance benefits over using a
thread pool and is quite incomplete in terms of system call coverage
along with having edge cases where blocking can occur.  Part of the
performance issue is the fact that it only supports direct io, not
buffered io.  The existing API is considered fundamentally flawed and
it's unlikely it will be expanded, but rather replaced:

  https://marc.info/?l=linux-aio&m=145255815216051&w=2

Since ext4 encryption means no direct io support, kernel aio isn't even
going to work properly on Android devices using file-based encryption.

Reviewed-at: https://android-review.googlesource.com/#/c/292158/

Link: http://lkml.kernel.org/r/1481113148-29204-1-git-send-email-amit.pundir@linaro.org
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <rob.herring@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: make export work with cold dcache

This adds get_parent function so that nfs client can still work after
cache drop (Tested on NFS v4 with echo 3 > /proc/sys/vm/drop_caches)

[weiyongjun1@huawei.com: fix return value check in affs_get_parent()]
Link: http://lkml.kernel.org/r/20170123141018.2331-1-weiyj.lk@gmail.com
Link: http://lkml.kernel.org/r/20170109191208.6085-8-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Suggested-by: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs/namei.c: forward declarations clean-up

Move dentry_operations structures and remove forward declarations.

Link: http://lkml.kernel.org/r/20170109191208.6085-7-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: add prefix to some functions

secs_to_datestamp(time64_t secs, struct affs_date *ds);
prot_to_mode(u32 prot);
mode_to_prot(struct inode *inode);

were declared without affs_ prefix

Link: http://lkml.kernel.org/r/20170109191208.6085-6-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: use octal for permissions

According to commit f90774e1fd27 ("checkpatch: look for symbolic
permissions and suggest octal instead")

Link: http://lkml.kernel.org/r/20170109191208.6085-5-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: make affs exportable

Add standard functions making AFFS work with NFS.

Functions based on ext4 implementation.  Tested on loop device.

Link: http://lkml.kernel.org/r/20170109191208.6085-4-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: add validation block function

Avoid repeating 4 times the same calculation.

Link: http://lkml.kernel.org/r/20170109191208.6085-3-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/affs: remove reference to affs_parent_ino()

Patch series "make FS exportable plus some clean-up", v7.

This small patchset makes AFFS work with NFS for standard operations.

THis patch (of 7):

affs_parent_ino() was removed a long time ago.

Link: http://lkml.kernel.org/r/20170109191208.6085-2-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs,eventpoll: don't test for bitfield with stack value

In case if epoll_ctl is called with operation EPOLL_CTL_DEL then
@epds.events variable allocated on stack may contain random bits which
we test then for EPOLLEXCLUSIVE.  Since currently the test look like

if (epds.events & EPOLLEXCLUSIVE) {
if (op == EPOLL_CTL_MOD)
goto error_tgt_fput;
if (op == EPOLL_CTL_ADD && (is_file_epoll(tf.file) ||
(epds.events & ~EPOLLEXCLUSIVE_OK_BITS)))
goto error_tgt_fput;
}

Nothing serious will happen even if epds.events has this bit set, still
better to be on safe side and make sure that we're to test this bit at
all.

Link: http://lkml.kernel.org/r/20170214154935.GG1850@uranus.lan
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Vagin <avagin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/pid.h: use for_each_thread() in do_each_pid_thread()

while_each_pid_thread() is using while_each_thread(), which is unsafe
under RCU lock according to commit 0c740d0afc3b ("introduce
for_each_thread() to replace the buggy while_each_thread()").  Use
for_each_thread() in do_each_pid_thread() which is safe under RCU lock.

Link: http://lkml.kernel.org/r/201702011947.DBD56740.OMVHOLOtSJFFFQ@I-love.SAKURA.ne.jp
Link: http://lkml.kernel.org/r/1486041779-4401-2-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: use get_user_pages_unlocked()

Moving from get_user_pages() to get_user_pages_unlocked() simplifies the
code and takes advantage of VM_FAULT_RETRY functionality when faulting
in pages.

Link: http://lkml.kernel.org/r/20170103205024.6704-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/kcore: update physical address for kcore ram and text

Currently all the p_paddr of PT_LOAD headers are assigned to 0, which is
not true and could be misleading, since 0 is a valid physical address.

User space tools like makedumpfile needs to know physical address for
PT_LOAD segments of direct mapped regions.  Therefore this patch updates
paddr for such regions.  It also sets an invalid paddr (-1) for other
regions, so that user space tool can know whether a physical address
provided in PT_LOAD is correct or not.

I do not know why it was 0, which is a valid physical address.  But
certainly, it might break some user space tools, and those need to be
fixed.  For example, see following code from kexec-tools

kexec/kexec-elf.c:build_mem_phdrs()

                    if ((phdr->p_paddr + phdr->p_memsz) < phdr->p_paddr) {
                            /* The memory address wraps */
                            if (probe_debug) {
                                    fprintf(stderr, "ELF address wrap around\n");
                            }
                            return -1;
                    }

We do not need to perform above check for an invalid physical address.

I think, kexec-tools and makedumpfile will need fixup.  I already have
those fixup which will be sent upstream once this patch makes through.
Pro with this approach is that, it will help to calculate variable like
page_offset, phys_base from PT_LOAD even when they are randomized and
therefore will reduce many variable and version specific values in user
space tools.

Having an ASLR offset information can help to translate an identity
mapped virtual address to a physical address.  But that would be an
additional field in PT_LOAD header structure and an arch dependent
value.

Moreover, sending a valid physical address like 0 does not seem right.
So, IMHO it is better to fix that and send valid physical address when
available (identity mapped).

Link: http://lkml.kernel.org/r/f951340d2917cdd2a329fae9837a83f2059dc3b2.1485318868.git.panand@redhat.com
Signed-off-by: Pratyush Anand <panand@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/sigaltstack/sas.c: improve output of sigaltstack testcase

Currently it uses %i for bitmasks, which makes it difficult to properly
decode the values.  Use %x instead.

Link: http://lkml.kernel.org/r/b7b4c45d-2f21-de6c-d1c8-16c8386da27c@list.ru
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sigaltstack: support SS_AUTODISARM for CONFIG_COMPAT

Currently SS_AUTODISARM is not supported in compatibility mode, but does
not return -EINVAL either.  This makes dosemu built with -m32 on x86_64
to crash.  Also the kernel's sigaltstack selftest fails if compiled with
-m32.

This patch adds the needed support.

Link: http://lkml.kernel.org/r/20170205101213.8163-2-stsp@list.ru
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Cc: Milosz Tanski <milosz@adfin.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Waiman Long <Waiman.Long@hpe.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/reiserfs: atomically read inode size

See i_size_read() comments in include/linux/fs.h

Link: http://lkml.kernel.org/r/20170123174701.30394-1-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: atomically read inode size

See i_size_read() comments in include/linux/fs.h

Link: http://lkml.kernel.org/r/20170123175338.3840-1-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: take more care to not update last_used on path walk

GUI environments seem to be becoming more agressive at scanning
filesystems, to the point where autofs cannot expire mounts at all.

This is one key reason the update of the autofs dentry info last_used
field is done in the expire system when the dentry is seen to be in use.

But somewhere along the way instances of the update has crept back into
the autofs path walk functions which, with the more aggressive file
access patterns, is preventing expiration.

Changing the update in the path walk functions allows autofs to at least
make progress in spite of frequent immediate re-mounts from file
accesses.

Link: http://lkml.kernel.org/r/148577167169.9801.1377050092212016834.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: remove duplicated AUTOFS_DEV_IOCTL_SIZE definition

This macro is already defined in uapi header.  Also use this macro where
possible.

Link: http://lkml.kernel.org/r/148577166656.9801.10322423666945951186.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: add command enum/macros for root-dir ioctls

Sync root-dir ioctl with misc-char-dev ioctl's enum/macro format since
these two types of ioctls aren't completely independent of each other in
terms of command nr.  No functional changes.

Link: http://lkml.kernel.org/r/148577166143.9801.15511796506678428145.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: update ioctl documentation regarding struct autofs_dev_ioctl

This is the same as bf72eda5 except that it's a different file.  Sync
documentation with changes made by 730c9eec in 2009.

Link: http://lkml.kernel.org/r/148577165630.9801.6081791213151121657.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: fix wrong ioctl documentation regarding devid

This is the same as d8732841 except that it's a different file.  A
caller has no devid input, and devid is obtained via superblock.

Link: http://lkml.kernel.org/r/148577165119.9801.16967562019122274820.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: fix typo in Documentation

Link: http://lkml.kernel.org/r/148577164606.9801.12571810310561599401.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: remove wrong comment

This format seems to have been taken from device mapper header, but
autofs has no such file:function in both kernel and userspace.

Link: http://lkml.kernel.org/r/148577164094.9801.4775075118014742496.stgit@pluto.themaw.net
Signed-off-by: Tomohiro Kusumi <tkusumi@tuxera.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: move kprobe declarations to asm-generic/kprobes.h

Often all is needed is these small helpers, instead of compiler.h or a
full kprobes.h.  This is important for asm helpers, in fact even some
asm/kprobes.h make use of these helpers...  instead just keep a generic
asm file with helpers useful for asm code with the least amount of
clutter as possible.

Likewise we need now to also address what to do about this file for both
when architectures have CONFIG_HAVE_KPROBES, and when they do not.  Then
for when architectures have CONFIG_HAVE_KPROBES but have disabled
CONFIG_KPROBES.

Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES,
this means most architecture code cannot include asm/kprobes.h safely.
Correct this and add guards for architectures missing them.
Additionally provide architectures that not have kprobes support with
the default asm-generic solution.  This lets us force asm/kprobes.h on
the header include/linux/kprobes.h always, but most importantly we can
now safely include just asm/kprobes.h on architecture code without
bringing the full kitchen sink of header files.

Two architectures already provided a guard against CONFIG_KPROBES on its
kprobes.h: sh, arch.  The rest of the architectures needed gaurds added.
We avoid including any not-needed headers on asm/kprobes.h unless
kprobes have been enabled.

In a subsequent atomic change we can try now to remove compiler.h from
include/linux/kprobes.h.

During this sweep I've also identified a few architectures defining a
common macro needed for both kprobes and ftrace, that of the definition
of the breakput instruction up.  Some refer to this as
BREAKPOINT_INSTRUCTION.  This must be kept outside of the #ifdef
CONFIG_KPROBES guard.

[mcgrof@kernel.org: fix arm64 build]
Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com
[sfr@canb.auug.org.au: fixup for kprobes declarations moving]
Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap: don't param_set_charp while holding spinlock

Change the zpool/compressor param callback function to release the
zswap_pools_lock spinlock before calling param_set_charp, since that
function may sleep when it calls kmalloc with GFP_KERNEL.

While this problem has existed for a while, I wasn't able to trigger it
using a tight loop changing either/both the zpool and compressor params; I
think it's very unlikely to be an issue on the stable kernels, especially
since most zswap users will change the compressor and/or zpool from sysfs
only one time each boot - or zero times, if they add the params to the
kernel boot.

Fixes: c99b42c3529e ("zswap: use charp for zswap param strings")
Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap: clear compressor or zpool param if invalid at init

If either the compressor and/or zpool param are invalid at boot, and
their default value is also invalid, set the param to the empty string
to indicate there is no compressor and/or zpool configured.  This allows
users to check the sysfs interface to see which param needs changing.

Link: http://lkml.kernel.org/r/20170124200259.16191-4-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap: allow initialization at boot without pool

Allow zswap to initialize at boot even if it can't create its pool due
to a failure to create a zpool and/or compressor.  Allow those to be
created later, from the sysfs module param interface.

Link: http://lkml.kernel.org/r/20170124200259.16191-3-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,fs,dax: mark dax_iomap_pmd_fault as const

The two alternative implementations of dax_iomap_fault have different
prototypes, and one of them is obviously wrong as seen from this build
warning:

  fs/dax.c: In function 'dax_iomap_fault':
  fs/dax.c:1462:35: error: passing argument 2 of 'dax_iomap_pmd_fault' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

This marks the argument 'const' as in all the related functions.

Fixes: a2d581675d48 ("mm,fs,dax: change ->pmd_fault to ->huge_fault")
Link: http://lkml.kernel.org/r/20170227203349.3318733-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'watchdog-for-linus-v4.11' of git://git./linux/kernel/git/groeck/linux-staging

Pull watchdog updates from Guenter Roeck:
 "Wim asked me to handle the watchdog pull request this time around.

  Key changes:

   - New drivers: Cortina Gemini, ZTE's zx2967 family, NIC7018

   - Convert to use device managed functions: ebc-c384_wdt, tegra_wdt,
     da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt, bcm2835_wdt,
     mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt, meson_wdt,
     sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt

   - Use watchdog core to install restart handler: tangox, dw_wdt,
     bcm2835_wdt, asm9260_wdt, bcm47xx_wdt

   - Convert ts72xx_wdt driver to watchdog core

   - Let core handle heartbeat in ep93xx_wdt driver

   - Enable COMPILE_TEST where possible

   - Various other improvements"

* tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  watchdog: s3c2410: Add prefix to local function
  watchdog: s3c2410: Select MFD_SYSCON on all Exynos platforms
  watchdog: s3c2410: Use dev_dbg instead of pr_info
  watchdog: s3c2410: Fix infinite interrupt in soft mode
  watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
  watchdog: softdog: make pretimeout support a compile option
  watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family watchdog controller
  watchdog: sama5d4: Implement resume hook
  watchdog: sama5d4: Cache MR instead of a partial config
  watchdog: ts72xx_wdt: convert driver to watchdog core
  watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
  watchdog: RDC321X_WDT always depends on PCI
  watchdog: add driver for Cortina Gemini watchdog
  watchdog: add DT bindings for Cortina Gemini
  watchdog: constify watchdog_ops structures
  watchdog: Introduce watchdog_stop_on_unregister helper
  watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callback
  watchdog: tegra_wdt: Convert to use device managed functions
  watchdog: da9063_wdt: Convert to use device managed functions
  ...

Merge tag 'linux-kselftest-4.11-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests from Stafford Horne

   - cpufreq tests from Viresh Kumar

   - Selftest build and install fixes from Bamvor Jian Zhang and Michael
     Ellerman

   - Fixes to protection-keys tests from Dave Hansen

   - Warning fixes from Shuah Khan"

* tag 'linux-kselftest-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests/powerpc: Fix remaining fallout from recent changes
  selftests/powerpc: Fix the clean rule since recent changes
  selftests: Fix the .S and .S -> .o rules
  selftests: Fix the .c linking rule
  selftests: Fix selftests build to just build, not run tests
  selftests, x86, protection_keys: fix wrong offset in siginfo
  selftests, x86, protection_keys: fix uninitialized variable warning
  selftest: cpufreq: Update MAINTAINERS file
  selftest: cpufreq: Add special tests
  selftest: cpufreq: Add support to test cpufreq modules
  selftest: cpufreq: Add suspend/resume/hibernate support
  selftest: cpufreq: Add support for cpufreq tests
  selftests: Add intel_pstate to TARGETS
  selftests/intel_pstate: Update makefile to match new style
  selftests/intel_pstate: Fix warning on loop index overflow
  cpupower: Restore format of frequency-info limit
  selftests/futex: Add headers to makefile dependencies
  selftests/futex: Add stdio used for logging
  selftests: x86 protection_keys remove dead code
  selftests: x86 protection_keys fix unused variable compile warnings
  ...

Merge tag 'for-linus-4.11-ofs2' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
 "Orangefs: cleanups, a protocol fix and an added configuration button.

  Cleanups:

   - silence harmless integer overflow warning (from
     dan.carpenter@oracle.com)

   - Dan Carpenter influenced debugfs cleanups.

   - remove orangefs_backing_dev_info (from jack@suse.cz)

  Protocol fix:

   - fix buffer size mis-match between kernel space and user space

  New configuration button:

   - support readahead_readcnt parameter"

* tag 'for-linus-4.11-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: fix buffer size mis-match between kernel space and user space.
  orangefs: Dan Carpenter influenced cleanups...
  orangefs: Remove orangefs_backing_dev_info
  orangefs: Support readahead_readcnt parameter.
  orangefs: silence harmless integer overflow warning

Merge branch 'for-linus-4.11' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs updates from Chris Mason:
 "This has a series of fixes and cleanups that Dave Sterba has been
  collecting.

  There is a pretty big variety here, cleaning up internal APIs and
  fixing corner cases"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (124 commits)
  Btrfs: use the correct type when creating cow dio extent
  Btrfs: fix deadlock between dedup on same file and starting writeback
  btrfs: use btrfs_debug instead of pr_debug in transaction abort
  btrfs: btrfs_truncate_free_space_cache always allocates path
  btrfs: free-space-cache, clean up unnecessary root arguments
  btrfs: convert btrfs_inc_block_group_ro to accept fs_info
  btrfs: flush_space always takes fs_info->fs_root
  btrfs: pass fs_info to (more) routines that are only called with extent_root
  btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
  btrfs: remove unused parameter from adjust_slots_upwards
  btrfs: remove unused parameters from __btrfs_write_out_cache
  btrfs: remove unused parameter from cleanup_write_cache_enospc
  btrfs: remove unused parameter from __add_inode_ref
  btrfs: remove unused parameter from clone_copy_inline_extent
  btrfs: remove unused parameters from btrfs_cmp_data
  btrfs: remove unused parameter from __add_inline_refs
  btrfs: remove unused parameters from scrub_setup_wr_ctx
  btrfs: remove unused parameter from create_snapshot
  btrfs: remove unused parameter from init_first_rw_device
  btrfs: remove unused parameter from __btrfs_alloc_chunk
  ...

Merge tag 'platform-drivers-x86-v4.11-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Big picture:

   - New intel_turbo_max_3 driver, providing max core frequency
     information to the scheduler. Intel PMC APL support, s0ix read API,
     and fixes.

   - New Silead touchscreen platform touchscreen descriptions.
     Additional hotkey support for the intel-hid driver.

   - New model support for dell-laptop and hp_accel.

   - Several cleanups, especially to the fujitsu-laptop and
     intel_mid_powerbtn drivers.

  Detail summary:

  platorm/x86:
   - silead depends on I2C being built-in
   - add support for devices with Silead touchscreens
   - Support Turbo Boost Max 3.0 for non HWP systems

  intel_turbo_max_3:
   - make it explicitly non-modular

  dell-laptop:
   - Add Latitude 7480 and others to the DMI whitelist

  intel-hid:
   - Support 5 button array

  thinkpad_acpi:
   - Call led_classdev_notify_brightness_hw_changed on kbd brightness change
   - Use brightness_set_blocking callback for LEDs
   - Stop setting led_classdev brightness directly

  acer-wmi:
   - add another KEY_WLAN keycode
   - Inform firmware that RF Button Driver is active
   - setup accelerometer when machine has appropriate notify event

  asus-wireless:
   - Fix indentation
   - Use per-HID HSWC parameters

  intel_pmc_ipc:
   - Add APL PMC PCI Id
   - read s0ix residency API
   - Remove unused iTCO_version variable

  alienware-wmi:
   - Remove header duplicate

  intel_pmc_core:
   - fix out-of-bounds accesses on stack

  intel_mid_powerbtn:
   - Use SCU IPC directly
   - Unify IRQ acknowledgment
   - Move comment to where it belongs
   - Unify PBSTATUS access
   - Remove snail address
   - Sort headers alphabetically
   - Join string literals
   - Enable driver for Merrifield
   - Acknowledge interrupts
   - Factor out mfld_ack()
   - Introduce driver data
   - Substitute mfld by mid
   - Convert to use devm_*()

  fujitsu-laptop:
   - make hotkey handling functions more similar
   - break up complex loop condition
   - move keycode processing to separate functions
   - decrease indentation in acpi_fujitsu_hotkey_notify()
   - simplify logolamp_get()
   - rework logolamp_set() to properly handle errors
   - set default trigger for radio LED to rfkill-any

  dell-smbios:
   - Auto-select as needed

  intel_mid_thermal:
   - Fix module autoload
   - Remove duplicated platform device ID

  mlx-platform:
   - mlxcpld-hotplug driver style fixes

  hp_accel:
   - Add support for HP ZBook 17"

* tag 'platform-drivers-x86-v4.11-1' of git://git.infradead.org/linux-platform-drivers-x86: (45 commits)
  platform/x86: intel_turbo_max_3: make it explicitly non-modular
  platform/x86: dell-laptop: Add Latitude 7480 and others to the DMI whitelist
  platform/x86: intel-hid: Support 5 button array
  platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change
  platform/x86: thinkpad_acpi: Use brightness_set_blocking callback for LEDs
  platform/x86: thinkpad_acpi: Stop setting led_classdev brightness directly
  leds: class: Add new optional brightness_hw_changed attribute
  platform/x86: acer-wmi: add another KEY_WLAN keycode
  platform/x86: acer-wmi: Inform firmware that RF Button Driver is active
  platform/x86: asus-wireless: Fix indentation
  platform/x86: asus-wireless: Use per-HID HSWC parameters
  platform/x86: intel_pmc_ipc: Add APL PMC PCI Id
  platform/x86: intel_pmc_ipc: read s0ix residency API
  platform/x86: alienware-wmi: Remove header duplicate
  platform/x86: intel_mid_powerbtn: Use SCU IPC directly
  platform/x86: intel_mid_powerbtn: Unify IRQ acknowledgment
  platform/x86: intel_mid_powerbtn: Move comment to where it belongs
  platform/x86: intel_mid_powerbtn: Unify PBSTATUS access
  platform/x86: intel_pmc_core: fix out-of-bounds accesses on stack
  platform/x86: silead depends on I2C being built-in
  ...

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The usual collection of new drivers, non-critical fixes, and updates
  to existing clk drivers. The bulk of the work is on Allwinner and
  Rockchip SoCs, but there's also an Intel Atom driver in here too.

  New Drivers:
   - Tegra BPMP firmware
   - Hisilicon hi3660 SoCs
   - Rockchip rk3328 SoCs
   - Intel Atom PMC
   - STM32F746
   - IDT VersaClock 5P49V5923 and 5P49V5933
   - Marvell mv98dx3236 SoCs
   - Allwinner V3s SoCs

  Removed Drivers:
   - Samsung Exynos4415 SoCs

  Updates:
   - Migrate ABx500 to OF
   - Qualcomm IPQ4019 CPU clks and general PLL support
   - Qualcomm MSM8974 RPM
   - Rockchip non-critical fixes and clk id additions
   - Samsung Exynos4412 CPUs
   - Socionext UniPhier NAND and eMMC support
   - ZTE zx296718 i2s and other audio clks
   - Renesas CAN and MSIOF clks for R-Car M3-W
   - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
   - TI CDCE913, CDCE937, and CDCE949 clk generators
   - Marvell Armada ap806 CPU frequencies
   - STM32F4* I2S/SAI support
   - Broadcom BCM2835 DSI support
   - Allwinner sun5i and A80 conversion to new style clk bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
  clk: renesas: mstp: ensure register writes complete
  clk: qcom: Do not drop device node twice
  clk: mvebu: adjust clock handling for the CP110 system controller
  clk: mvebu: Expand mv98dx3236-core-clock support
  clk: zte: add i2s clocks for zx296718
  clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
  clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
  clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
  clk: tegra: Add BPMP clock driver
  clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
  clk: uniphier: add NAND clock for all UniPhier SoCs
  ARM: dts: sun9i: Switch to new clock bindings
  clk: sunxi-ng: Add A80 Display Engine CCU
  clk: sunxi-ng: Add A80 USB CCU
  clk: sunxi-ng: Add A80 CCU
  clk: sunxi-ng: Support separately grouped PLL lock status register
  clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
  clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
  clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
  clk: qcom: SDHCI enablement on Nexus 5X / 6P
  ...

Merge branch 'i2c/for-4.11' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including <linux/version.h>
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...

Merge tag 'for-next-dma_ops' of git://git./linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...

Merge tag 'fbdev-v4.11' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:

 - fix for font color when console is switched to another fb driver

 - deferred probing fixes for simplefb driver

 - preparations to add support of an optional GPIO to enable panel for
   ARM CLCD driver

 - some improvements for ssd1307fb driver

 - cleanups for OMAP fbdev LCD drivers

 - misc fixes/cleanups for various fb drivers

* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
  video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
  fbdev: ssd1307fb: include linux/gpio/consumer.h
  video: fbdev: fsl-diu-fb: remove impossible condition
  video: fbdev: amifb: remove impossible condition
  fbdev/ssd1307fb: clear screen in probe
  fbdev/ssd1307fb: add support to enable VBAT
  fbdev: ssd1307fb: Make reset gpio devicetree property optional
  fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
  fbdev: ssd1307fb: Start to use gpiod API for reset gpio
  video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
  video: fbdev: offb: switch to using for_each_node_by_type
  video/console: use setup_timer and mod_timer instead of init_timer
  fbdev: omap/lcd: Make callbacks optional
  fbdev: omap/lcd: Staticize non-exported lcd_panel structs
  fbdev: omap/lcd: Remove no-op driver callbacks
  video/mbx: use simple_open()
  video: fbdev: stifb: handle NULL return value from ioremap_nocache
  video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
  video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
  video: ARM CLCD: use panel device node for getting backlight and mode
  ...

treewide: Remove remaining executable attributes from source files

These are the current source files that should not have
executable attributes set.

[ Normally this would be sent through Andrew Morton's tree
  but his quilt tools don't like permission only patches. ]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:

 - almost all of the rest of MM

 - misc bits

 - KASAN updates

 - procfs

 - lib/ updates

 - checkpatch updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits)
  checkpatch: remove false unbalanced braces warning
  checkpatch: notice unbalanced else braces in a patch
  checkpatch: add another old address for the FSF
  checkpatch: update $logFunctions
  checkpatch: warn on logging continuations
  checkpatch: warn on embedded function names
  lib/lz4: remove back-compat wrappers
  fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version
  crypto: change LZ4 modules to work with new LZ4 module version
  lib/decompress_unlz4: change module to work with new LZ4 module version
  lib: update LZ4 compressor module
  lib/test_sort.c: make it explicitly non-modular
  lib: add CONFIG_TEST_SORT to enable self-test of sort()
  rbtree: use designated initializers
  linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors
  lib/find_bit.c: micro-optimise find_next_*_bit
  lib: add module support to atomic64 tests
  lib: add module support to glob tests
  lib: add module support to crc32 tests
  kernel/ksysfs.c: add __ro_after_init to bin_attribute structure
  ...

mac80211_hwsim: Replace bogus hrtimer clockid

mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW.
That's not supported.

Use CLOCK_MONOTNIC instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'v4.10' of git://git./linux/kernel/git/torvalds/linux into for-next

Linux 4.10

platform/x86: intel_turbo_max_3: make it explicitly non-modular

The Kconfig currently controlling compilation of this code is:

drivers/platform/x86/Kconfig:config INTEL_TURBO_MAX_3
drivers/platform/x86/Kconfig:   bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We do uncover some implicit includes during build coverage that
were hidden behind the module.h which pulls in a lot of dependants.

Cc: Andy Shevchenko <andy@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

platform/x86: dell-laptop: Add Latitude 7480 and others to the DMI whitelist

This is to support Latitude 7480 and many other newer Dell laptops.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

platform/x86: intel-hid: Support 5 button array

New firmwares include a feature called 5 button array that supports
super key, volume up/down, rotation lock and power button. Support
for this feature is required to fix power button on some recent
systems.

This patch was tested on a Dell Latitude 7480.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change

Make thinkpad_acpi call led_classdev_notify_brightness_hw_changed on the
kbd_led led_classdev registered by thinkpad_acpi when the kbd backlight
brightness is changed through the hotkey.

This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

platform/x86: thinkpad_acpi: Use brightness_set_blocking callback for LEDs

Now a days the LED core can take care of executing brightness_set from
a workqueue if it needs to sleep, make use of this and remove a bunch
of DIY code for this.

Since this commit removes the workqueue usage for LEDs, the
led_sysfs_blink_set callback may now also sleep, this is fine.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

platform/x86: thinkpad_acpi: Stop setting led_classdev brightness directly

There is no need to set the led_classdev's brightness value from
its set_brightness callback, this is taken care of by the led-core and
thinkpad_acpi really should not be mucking with it.

Note that kbdlight_set_level_and_update() is still used by the old
thinpad_acpi specific sysfs interface for the led, so we cannot
remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

leds: class: Add new optional brightness_hw_changed attribute

Some LEDs may have their brightness level changed autonomously
(outside of kernel control) by hardware / firmware. This commit
adds support for an optional brightness_hw_changed attribute to
signal such changes to userspace (if a driver can detect them):

What: /sys/class/leds/<led>/brightness_hw_changed
Date: January 2017
KernelVersion: 4.11
Description:
Last hardware set brightness level for this LED. Some LEDs
may be changed autonomously by hardware/firmware. Only LEDs
where this happens and the driver can detect this, will
have this file.

This file supports poll() to detect when the hardware
changes the brightness.

Reading this file will return the last brightness level set
by the hardware, this may be different from the current
brightness.

Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to
their flags field and call led_classdev_notify_brightness_hw_changed()
with the hardware set brightness when they detect a hardware / firmware
triggered brightness change.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

platform/x86: acer-wmi: add another KEY_WLAN keycode

Now that we have informed the firmware that the RF Button driver is
active, laptops such as the Acer TravelMate P238-M will generate
a WMI key event with code 0x86 when the Fn+F3 airplane mode key is
pressed.

Add this keycode to the table so that it is converted to an appropriate
input event.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: acer-wmi: Inform firmware that RF Button Driver is active

The same method to activate LM(Launch Manager) can also be used to
activate the RF Button driver with different bit toggled in the same
lm_status. To express that many functions this byte field can achieve,
rename the lm_status to app_status. And also the app_mask is the bit
mask which specifically indicate which bits are going to be changed.

This solves a problem where the AR9565 wifi included in the
Acer Aspire ES1-421 is permanently hard blocked according to the rfkill
GPIO read by ath9k.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: asus-wireless: Fix indentation

Fix indentation problem introduced when this driver was first merged into
the kernel.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: asus-wireless: Use per-HID HSWC parameters

Some Asus machines use 0x4/0x5 as their LED on/off values, while others
use 0x0/0x1, as shown in the DSDT excerpts below. Luckily it seems this
behavior is tied to different HIDs, after looking at 44 DSDTs from
different Asus models.

Another small difference is that a few of them call GWBL instead of
OWGS, and SWBL instead of OWGD. That does not seem to make a difference
for asus-wireless, and is additional reasoning to not try to call these
methods directly.

Device (ASHS)                       | Device (ASHS)
{                                   | {
    Name (_HID, "ATK4002")          |     Name (_HID, "ATK4001")
    Method (HSWC, 1, Serialized)    |     Method (HSWC, 1, Serialized)
    {                               |     {
        If ((Arg0 < 0x02))          |         If ((Arg0 < 0x02))
        {                           |         {
            OWGD (Arg0)             |             OWGD (Arg0)
            Return (One)            |             Return (One)
        }                           |         }
        If ((Arg0 == 0x02))         |
        {                           |         If ((Arg0 == 0x02))
            Local0 = OWGS ()        |         {
            If (Local0)             |             Return (OWGS ())
            {                       |         }
                    Return (0x05)   |
            }                       |         If ((Arg0 == 0x03))
            Else                    |         {
            {                       |             Return (0xFF)
                    Return (0x04)   |         }
            }                       |
        }                           |         If ((Arg0 == 0x80))
        If ((Arg0 == 0x03))         |         {
        {                           |            Return (One)
            Return (0xFF)           |         }
        }                           |     }
        If ((Arg0 == 0x04))         |     Method (_STA, 0, NotSerialized)
        {                           |     {
            OWGD (Zero)             |         If ((MSOS () >= OSW8))
            Return (One)            |         {
        }                           |             Return (0x0F)
        If ((Arg0 == 0x05))         |         }
        {                           |         Else
            OWGD (One)              |         {
            Return (One)            |             Return (Zero)
        }                           |         }
        If ((Arg0 == 0x80))         |     }
        {                           | }
            Return (One)            |
        }                           |
    }                               |
    Method (_STA, 0, NotSerialized) |
    {                               |
        If ((MSOS () >= OSW8))      |
        {                           |
            Return (0x0F)           |
        }                           |
        Else                        |
        {                           |
            Return (Zero)           |
        }                           |
    }                               |
}                                   |

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: intel_pmc_ipc: Add APL PMC PCI Id

This patch adds the PCI Device id for Power Management Controller on Intel
Apollo Lake platforms.

Intel PMC IPC Driver loads as a platform driver on Apollo Lake platforms
since Intel BIOS hides the PCI Configuration space for 0:13:1 and
re-enumerates it as ACPI device (INT34D2). The correct PCI Device ID should
be added if some platform firmware choses to enumerate the device via PCI
space.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: intel_pmc_ipc: read s0ix residency API

This patch adds a new API to indicate S0ix residency in usec. It utilizes
the PMC Global Control Registers (GCR) to read deep and shallow
S0ix residency.

PMC MMIO resources:
        o Lower 4kB: IPC1 (PMC inter-processor communication) interface
        o Upper 4kB: GCR (Global Control Registers)

This enables the power management framework to take corrective actions when
the platform fails to enter S0ix after kernel freeze as part of the suspend
to idle flow. (echo freeze > /sys/power/state).

This is expected to be used with a S0ix failsafe framework such as:
<https://lwn.net/Articles/689505/>

[rajneesh: folded in "fix division in 32-bit case" from Andy Shevchenko]
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Shanth Murthy <shanth.murthy@intel.com>
[andy: fixed kbuild error, removed "total" from variables, fixed macro]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: alienware-wmi: Remove header duplicate

No need to #include <linux/acpi.h> twice. Remove second occurrence.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: intel_mid_powerbtn: Use SCU IPC directly

On older Intel MID platforms is using SCU IPC library beneath MSIC
calls.

To make access unified between old and new platforms use SCU IPC library
directly. It's safe since serialization is done in the library.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: intel_mid_powerbtn: Unify IRQ acknowledgment

The IRQ on Intel Merrifield can be acknowledged in the similar way it's
done for previous MID platforms. Unify acknowledgment via SCU IPC.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

Pull OpenRISC updates from Stafford Horne:
 "Highlights include:

   - optimized memset and memcpy routines, ~20% boot time saving

   - support for cpu idling

   - adding support for l.swa and l.lwa atomic operations (in spec from
     2014)

   - use atomics to implement: bitops, cmpxchg, futex

   - the atomics are in preparation for SMP support"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits)
  openrisc: head: Init r0 to 0 on start
  openrisc: Export ioremap symbols used by modules
  arch/openrisc/lib/memcpy.c: use correct OR1200 option
  openrisc: head: Remove unused strings
  openrisc: head: Move init strings to rodata section
  openrisc: entry: Fix delay slot detection
  openrisc: entry: Whitespace and comment cleanups
  scripts/checkstack.pl: Add openrisc support
  MAINTAINERS: Add the openrisc official repository
  openrisc: Add .gitignore
  openrisc: Add optimized memcpy routine
  openrisc: Add optimized memset
  openrisc: Initial support for the idle state
  openrisc: Fix the bitmask for the unit present register
  openrisc: remove unnecessary stddef.h include
  openrisc: add futex_atomic_* implementations
  openrisc: add optimized atomic operations
  openrisc: add cmpxchg and xchg implementations
  openrisc: add atomic bitops
  openrisc: add l.lwa/l.swa emulation
  ...

checkpatch: remove false unbalanced braces warning

Lines containing "} else {" should not be detected as unbalanced braces.
But the second check can be reduced to ".+else\s*{" and it therefore
never checked if the beginning of a line contains any other character
(like the relevant "}").  This check would also return true for "} else
{" and create warnings like

    CHECK: Unbalanced braces around else statement
    #391: FILE: ./net/batman-adv/tvlv.c:391:
    +   } else {

The check can be changed to check the whole line for the missing "}" to
avoid this false positive.

Fixes: 0d1532456c26 ("checkpatch: notice unbalanced else braces in a patch")
Link: http://lkml.kernel.org/r/20170220121644.12209-1-sven@narfation.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: notice unbalanced else braces in a patch

Patches that add or modify code like

} else
<foo>
or
else {
<bar>

where one branch appears to have a brace and the other branch does not
have a brace should emit a --strict style message.

Link: http://lkml.kernel.org/r/c6be32747fc725cbc235802991746700a0f54fdc.1486754390.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add another old address for the FSF

We still have a lot of old addresses for the FSF in the kernel.

  willy@harry:~/kernel/idr$ git grep '675 Mass' |wc -l
  1502
  willy@harry:~/kernel/idr$ git grep '59 Temple' |wc -l
  2825
  willy@harry:~/kernel/idr$ git grep '51 Franklin' |wc -l
  2020

Let's discourage adding the oldest one too.

Link: http://lkml.kernel.org/r/20170128173052.GA23532@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update $logFunctions

Currently checkpatch.pl does not recognize printk_deferred* functions as
log functions and complains about the line length of printk_deferred*
functions.  Add printk_deferred* to logFunctions to fix it.

Link: http://lkml.kernel.org/r/1484537124-18083-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on logging continuations

pr_cont(...) and printk(KERN_CONT ...) uses should be discouraged
as their output can be interleaved by multiple logging processes.

Link: http://lkml.kernel.org/r/7100ba00098694ec81471a299583ed068975fd05.1483465888.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on embedded function names

Embedded function names are less appropriate to use when refactoring can
cause function renaming.  Prefer the use of "%s", __func__ to embedded
function names.

Link: http://lkml.kernel.org/r/ac9631fdbac5af3507c5bfe88ad9064f0ed764ec.1483510416.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lz4: remove back-compat wrappers

Remove the functions introduced as wrappers for providing backwards
compatibility to the prior LZ4 version.  They're not needed anymore
since there's no callers left.

Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version

Update fs/pstore and fs/squashfs to use the updated functions from the
new LZ4 module.

Link: http://lkml.kernel.org/r/1486321748-19085-5-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crypto: change LZ4 modules to work with new LZ4 module version

Update the crypto modules using LZ4 compression as well as the test
cases in testmgr.h to work with the new LZ4 module version.

Link: http://lkml.kernel.org/r/1486321748-19085-4-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/decompress_unlz4: change module to work with new LZ4 module version

Update the unlz4 wrapper to work with the updated LZ4 kernel module
version.

Link: http://lkml.kernel.org/r/1486321748-19085-3-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: update LZ4 compressor module

Patch series "Update LZ4 compressor module", v7.

This patchset updates the LZ4 compression module to a version based on
LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast
which provides an "acceleration" parameter as a tradeoff between high
compression ratio and high compression speed.

We want to use LZ4 fast in order to support compression in lustre and
(mostly, based on that) investigate data reduction techniques in behalf
of storage systems.

Also, it will be useful for other users of LZ4 compression, as with LZ4
fast it is possible to enable applications to use fast and/or high
compression depending on the usecase.  For instance, ZRAM is offering a
LZ4 backend and could benefit from an updated LZ4 in the kernel.

LZ4 homepage: http://www.lz4.org/
LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3

Benchmark (taken from [1], Core i5-4300U @1.9GHz):
----------------|--------------|----------------|----------
Compressor      | Compression  | Decompression  | Ratio
----------------|--------------|----------------|----------
memcpy          |  4200 MB/s   |  4200 MB/s     | 1.000
LZ4 fast 50     |  1080 MB/s   |  2650 MB/s     | 1.375
LZ4 fast 17     |   680 MB/s   |  2220 MB/s     | 1.607
LZ4 fast 5      |   475 MB/s   |  1920 MB/s     | 1.886
LZ4 default     |   385 MB/s   |  1850 MB/s     | 2.101

[1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html

[PATCH 1/5] lib: Update LZ4 compressor module
[PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version
[PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version
[PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version
[PATCH 5/5] lib/lz4: Remove back-compat wrappers

This patch (of 5):

Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet.  The kernel
module is inspired by the previous work by Chanho Min.  The updated LZ4
module will not break existing code since the patchset contains
appropriate changes.

API changes:

New method LZ4_compress_fast which differs from the variant available in
kernel by the new acceleration parameter, allowing to trade compression
ratio for more compression speed and vice versa.

LZ4_decompress_fast is the respective decompression method, featuring a
very fast decoder (multiple GB/s per core), able to reach RAM speed in
multi-core systems.  The decompressor allows to decompress data
compressed with LZ4 fast as well as the LZ4 HC (high compression)
algorithm.

Also the useful functions LZ4_decompress_safe_partial and
LZ4_compress_destsize were added.  The latter reverses the logic by
trying to compress as much data as possible from source to dest while
the former aims to decompress partial blocks of data.

A bunch of streaming functions were also added which allow
compressig/decompressing data in multiple steps (so called "streaming
mode").

The methods lz4_compress and lz4_decompress_unknownoutputsize are now
known as LZ4_compress_default respectivley LZ4_decompress_safe.  The old
methods will be removed since there's no callers left in the code.

[arnd@arndb.de: fix KERNEL_LZ4 support]
Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de
[akpm@linux-foundation.org: simplify]
[akpm@linux-foundation.org: fix the simplification]
[4sschmid@informatik.uni-hamburg.de: fix performance regressions]
Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de
[4sschmid@informatik.uni-hamburg.de: v8]
Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_sort.c: make it explicitly non-modular

The Kconfig currently controlling compilation of this code is:

     lib/Kconfig.debug:config TEST_SORT
     lib/Kconfig.debug:      bool "Array-based sort test"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular case,
the init ordering becomes slightly earlier when we change it to use
subsys_initcall as done here.  However, since it is a self contained
test, this shouldn't be an issue and subsys_initcall seems like a better
fit for this particular case.

We also delete the MODULE_LICENSE tag since that information is now
contained at the top of the file in the comments.

Link: http://lkml.kernel.org/r/20170124225608.7319-1-paul.gortmaker@windriver.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kostenzer Felix <fkostenzer@live.at>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add CONFIG_TEST_SORT to enable self-test of sort()

Along with the addition made to Kconfig.debug, the prior existing but
permanently disabled test function has been slightly refactored.

Patch has been tested using QEMU 2.1.2 with a .config obtained through
'make defconfig' (x86_64) and manually enabling the option.

[arnd@arndb.de: move sort self-test into a separate file]
Link: http://lkml.kernel.org/r/20170112110657.3123790-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/HE1PR09MB0394B0418D504DCD27167D4FD49B0@HE1PR09MB0394.eurprd09.prod.outlook.com
Signed-off-by: Kostenzer Felix <fkostenzer@live.at>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree: use designated initializers

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers.  These were identified
during allyesconfig builds of x86, arm, and arm64, with most initializer
fixes extracted from grsecurity.

Link: http://lkml.kernel.org/r/20161217010253.GA140470@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jie Chen <fykcee1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors

While working on a thermal driver I encounter a scenario where the
divisor could be negative, instead of adding local code to handle this I
though I first try to add support for this in DIV_ROUND_CLOSEST.

Add support to DIV_ROUND_CLOSEST for negative divisors if both dividend
and divisor variable types are signed.  This should not alter current
behavior for users of the macro as previously negative divisors where
not supported.

Before:

DIV_ROUND_CLOSEST(  59,  4) =  15
DIV_ROUND_CLOSEST(  59, -4) = -14
DIV_ROUND_CLOSEST( -59,  4) = -15
DIV_ROUND_CLOSEST( -59, -4) =  14

After:

DIV_ROUND_CLOSEST(  59,  4) =  15
DIV_ROUND_CLOSEST(  59, -4) = -15
DIV_ROUND_CLOSEST( -59,  4) = -15
DIV_ROUND_CLOSEST( -59, -4) =  15

[akpm@linux-foundation.org: fix comment, per Guenter]
Link: http://lkml.kernel.org/r/20161222102217.29011-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/find_bit.c: micro-optimise find_next_*_bit

This saves 32 bytes on my x86-64 build, mostly due to alignment
considerations and sharing more code between find_next_bit and
find_next_zero_bit, but it does save a couple of instructions.

There's really two parts to this commit:
 - First, the first half of the test: (!nbits || start >= nbits) is
   trivially a subset of the second half, since nbits and start are both
   unsigned
 - Second, while looking at the disassembly, I noticed that GCC was
   predicting the branch taken. Since this is a failure case, it's
   clearly the less likely of the two branches, so add an unlikely() to
   override GCC's heuristics.

[mawilcox@microsoft.com: v2]
Link: http://lkml.kernel.org/r/1483709016-1834-1-git-send-email-mawilcox@linuxonhyperv.com
Link: http://lkml.kernel.org/r/1483709016-1834-1-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add module support to atomic64 tests

Allow to compile the atomic64 test code either to a loadable module, or
builtin into the kernel.

Link: http://lkml.kernel.org/r/1483470276-10517-3-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add module support to glob tests

Extract the glob test code into its own source file, to allow to compile
it either to a loadable module, or builtin into the kernel.

Link: http://lkml.kernel.org/r/1483470276-10517-2-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add module support to crc32 tests

Extract the crc32 test code into its own source file, to allow to
compile it either to a loadable module, or builtin into the kernel.

Link: http://lkml.kernel.org/r/1483470276-10517-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/ksysfs.c: add __ro_after_init to bin_attribute structure

The object notes_attr of type bin_attribute is not modified after
getting initailized by ksysfs_init.  Apart from initialization in
ksysfs_init it is also passed as an argument to the function
sysfs_create_bin_file but this argument is of type const.  Therefore,
add __ro_after_init to its declaration.

Link: http://lkml.kernel.org/r/1486839969-16891-1-git-send-email-bhumirks@gmail.com
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/notifier.c: simplify expression

NOTIFY_STOP_MASK (0x8000) has only one bit set and there is no need to
compare output of "ret & NOTIFY_STOP_MASK" to NOTIFY_STOP_MASK.  We just
need to make sure the output is non-zero, that's it.

Link: http://lkml.kernel.org/r/88ee58264a2bfab1c97ffc8ac753e25f55f57c10.1483593065.git.viresh.kumar@linaro.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm balloon: umount balloon_mnt when removing vb device

With CONFIG_BALLOON_COMPACTION=y the kernel will mount balloon_mnt for
balloon page migration when we probe a virtio_balloon device.  However
we do not unmount it when removing the device.  Fix this.

Fixes: b1123ea6d3b3 ("mm: balloon: use general non-lru movable page feature")
Link: http://lkml.kernel.org/r/1486531318-35189-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bug: switch data corruption check to __must_check

The CHECK_DATA_CORRUPTION() macro was designed to have callers do
something meaningful/protective on failure.  However, using "return
false" in the macro too strictly limits the design patterns of callers.
Instead, let callers handle the logic test directly, but make sure that
the result IS checked by forcing __must_check (which appears to not be
able to be used directly on macro expressions).

Link: http://lkml.kernel.org/r/20170206204547.GA125312@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: replace gcc specific macros with ones from compiler.h

There is <linux/compiler.h> which provides macros for various gcc
specific constructs.  Eg: __weak for __attribute__((weak)).  I've
cleaned all instances of gcc specific attributes with the right macros
for all files under /arch/m68k

Link: http://lkml.kernel.org/r/1485540901-1988-3-git-send-email-gidisrael@gmail.com
Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

compiler-gcc.h: add a new macro to wrap gcc attribute

Add __mode(x) into compiler-gcc.h as part of a cleanup task I've taken
up, to replace gcc specific attributes with macros.

The next patch is a cleanup of the m68k subsystem and it requires a new
macro to wrap __attribute__ ((mode (...)))

Link: http://lkml.kernel.org/r/1485540901-1988-2-git-send-email-gidisrael@gmail.com
Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/iopoll.h: include <linux/ktime.h> instead of <linux/hrtimer.h>

The timer APIs this header needs are ktime_get(), ktime_add_us(), and
ktime_compare().  So, including <linux/ktime.h> seems enough.  This
commit will cut unnecessary header file parsing.

Link: http://lkml.kernel.org/r/1481679225-10885-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uapi: mqueue.h: add missing linux/types.h include

Commit 63159f5dcccb ("uapi: Use __kernel_long_t in struct mq_attr")
changed the types from long to __kernel_long_t, but didn't add a
linux/types.h include.  Code that tries to include this header directly
breaks:

  /usr/include/linux/mqueue.h:26:2: error: unknown type name '__kernel_long_t'
  __kernel_long_t mq_flags; /* message queue flags   */

This also upsets configure tests for this header:

  checking linux/mqueue.h usability... no
  checking linux/mqueue.h presence... yes
  configure: WARNING: linux/mqueue.h: present but cannot be compiled
  configure: WARNING: linux/mqueue.h:     check for missing prerequisite headers?
  configure: WARNING: linux/mqueue.h: see the Autoconf documentation
  configure: WARNING: linux/mqueue.h:     section "Present But Cannot Be Compiled"
  configure: WARNING: linux/mqueue.h: proceeding with the compiler's result
  checking for linux/mqueue.h... no

Link: http://lkml.kernel.org/r/20170119194644.4403-1-vapier@gentoo.org
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: use an enum for possible hidepid values

Previously, the hidepid parameter was checked by comparing literal
integers 0, 1, 2.  Let's add a proper enum for this, to make the
checking more expressive:

        0 → HIDEPID_OFF
        1 → HIDEPID_NO_ACCESS
        2 → HIDEPID_INVISIBLE

This changes the internal labelling only, the userspace-facing interface
remains unmodified, and still works with literal integers 0, 1, 2.

No functional changes.

Link: http://lkml.kernel.org/r/1484572984-13388-2-git-send-email-djalal@gmail.com
Signed-off-by: Lafcadio Wluiki <wluikil@gmail.com>
Signed-off-by: Djalal Harouni <tixxdz@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: less code duplication in /proc/*/cmdline

After staring at this code for a while I've figured using small 2-entry
array describing ARGV and ENVP is the way to address code duplication
critique.

Link: http://lkml.kernel.org/r/20170105185724.GA12027@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: use rb_entry()

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Link: http://lkml.kernel.org/r/4fd1f82818665705ce75c5156a060ae7caa8e0a9.1482160150.git.geliangtang@gmail.com
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: use generic current.h

Given that the arch does not add its own implementations, simply use the
asm-generic/current.h (generic-y) header instead of duplicating code.

Link: http://lkml.kernel.org/r/1485992878-4780-2-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/frv/mb93090-mb00/pci-frv.c: fix build warning

The build of frv defconfig gives warning:

  arch/frv/mb93090-mb00/pci-frv.c:176:5: warning: ignoring return value of 'pci_assign_resource', declared with attribute warn_unused_result

Just print an error message to silence the warning.  We can not do much
here on error.

Link: http://lkml.kernel.org/r/1484256471-5379-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: add memcg kmem_cache test

Make a kasan test which uses a SLAB_ACCOUNT slab cache.  If the test is
run within a non default memcg, then it uncovers the bug fixed by
"kasan: drain quarantine of memcg slab objects"[1].

If run without fix [1] it shows "Slab cache still has objects", and the
kmem_cache structure is leaked.
Here's an unpatched kernel test:

 $ dmesg -c > /dev/null
 $ mkdir /sys/fs/cgroup/memory/test
 $ echo $$ > /sys/fs/cgroup/memory/test/tasks
 $ modprobe test_kasan 2> /dev/null
 $ dmesg | grep -B1 still
 [ 123.456789] kasan test: memcg_accounted_kmem_cache allocate memcg accounted object
 [ 124.456789] kmem_cache_destroy test_cache: Slab cache still has objects

Kernels with fix [1] don't have the "Slab cache still has objects"
warning or the underlying leak.

The new test runs and passes in the default (root) memcg, though in the
root memcg it won't uncover the problem fixed by [1].

Link: http://lkml.kernel.org/r/1482257462-36948-2-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: drain quarantine of memcg slab objects

Per memcg slab accounting and kasan have a problem with kmem_cache
destruction.
 - kmem_cache_create() allocates a kmem_cache, which is used for
   allocations from processes running in root (top) memcg.
 - Processes running in non root memcg and allocating with either
   __GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg
   kmem_cache.
 - Kasan catches use-after-free by having kfree() and kmem_cache_free()
   defer freeing of objects. Objects are placed in a quarantine.
 - kmem_cache_destroy() destroys root and non root kmem_caches. It takes
   care to drain the quarantine of objects from the root memcg's
   kmem_cache, but ignores objects associated with non root memcg. This
   causes leaks because quarantined per memcg objects refer to per memcg
   kmem cache being destroyed.

To see the problem:

 1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,)
 2) from non root memcg, allocate and free a few objects from cache
 3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy()
    will trigger a "Slab cache still has objects" warning indicating
    that the per memcg kmem_cache structure was leaked.

Fix the leak by draining kasan quarantined objects allocated from non
root memcg.

Racing memcg deletion is tricky, but handled.  kmem_cache_destroy() =>
shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache()
flushes per memcg quarantined objects, even if that memcg has been
rmdir'd and gone through memcg_deactivate_kmem_caches().

This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is
enabled.  So I don't think it's worth patching stable kernels.

Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory-hotplug: use dev_online for memhp_auto_online

Commit 31bc3858ea3e ("add automatic onlining policy for the newly added
memory") provides the capability to have added memory automatically
onlined during add, but this appears to be slightly broken.

The current implementation uses walk_memory_range() to call
online_memory_block, which uses memory_block_change_state() to online
the memory.  Instead, we should be calling device_online() for the
memory block in online_memory_block().  This would online the memory
(the memory bus online routine memory_subsys_online() called from
device_online calls memory_block_change_state()) and properly update the
device struct offline flag.

As a result of the current implementation, attempting to remove a memory
block after adding it using auto online fails.  This is because doing a
remove, for instance

  echo offline > /sys/devices/system/memory/memoryXXX/state

uses device_offline() which checks the dev->offline flag.

Link: http://lkml.kernel.org/r/20170222220744.8119.19687.stgit@ltcalpine2-lp14.aus.stglabs.ibm.com
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do not access page->mapping directly on page_endio

With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails.  The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page.  Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.

swap_writepage
  bdev_writepage
    ops->rw_page

I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.

When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.

Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp/autonuma: use TNF flag instead of vm fault

We are using the wrong flag value in task_numa_falt function.  This can
result in us doing wrong numa fault statistics update, because we update
num_pages_migrate and numa_fault_locality etc based on the flag argument
passed.

Fixes: bae473a423 ("mm: introduce fault_env")
Link: http://lkml.kernel.org/r/1487498395-9544-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: check for protnone only if it is a PTE entry

Do the prot_none/FOLL_NUMA check after we are sure this is a THP pte.
Archs can implement prot_none such that it can return true for regular
pmd entries.

Link: http://lkml.kernel.org/r/1487498326-8734-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>