drm: Nuke fb->bits_per_pixel

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8.
Less duplicated information is a good thing.

Note that I didn't put parens around the cpp*8 in the below cocci script,
on account of not wanting spurious parens all over the place. Instead I
did the unsafe way, and tried to look over the entire diff to spot if
any dangerous expressions were produced. I didn't see any.

There are some cases where previously the code did X*bpp/8, so the
division happened after the multiplication. Those are now just X*cpp
so the division effectively happens before the multiplication,
but that is perfectly fine since bpp is always a multiple of 8.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
...
- FB->bits_per_pixel = E;
...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
...
- FB->bits_per_pixel = E;
...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
...
- FB->bits_per_pixel = E;
...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
...
- FB->bits_per_pixel = E;
...
 }

@@
struct drm_framebuffer FB;
expression E;
@@
(
- E * FB.bits_per_pixel / 8
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel / 8
+ FB.format->cpp[0]
|
- E * FB.bits_per_pixel >> 3
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel >> 3
+ FB.format->cpp[0]
|
- (FB.bits_per_pixel + 7) / 8
+ FB.format->cpp[0]
|
- FB.bits_per_pixel
+ FB.format->cpp[0] * 8
|
- FB.format->cpp[0] * 8 != 8
+ FB.format->cpp[0] != 1
)

@@
struct drm_framebuffer *FB;
expression E;
@@
(
- E * FB->bits_per_pixel / 8
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel / 8
+ FB->format->cpp[0]
|
- E * FB->bits_per_pixel >> 3
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel >> 3
+ FB->format->cpp[0]
|
- (FB->bits_per_pixel + 7) / 8
+ FB->format->cpp[0]
|
- FB->bits_per_pixel
+ FB->format->cpp[0] * 8
|
- FB->format->cpp[0] * 8 != 8
+ FB->format->cpp[0] != 1
)

@@
struct drm_plane_state *state;
expression E;
@@
(
- E * state->fb->bits_per_pixel / 8
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel / 8
+ state->fb->format->cpp[0]
|
- E * state->fb->bits_per_pixel >> 3
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel >> 3
+ state->fb->format->cpp[0]
|
- (state->fb->bits_per_pixel + 7) / 8
+ state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel
+ state->fb->format->cpp[0] * 8
|
- state->fb->format->cpp[0] * 8 != 8
+ state->fb->format->cpp[0] != 1
)

@@
@@
- (8 * 8)
+ 8 * 8

@@
struct drm_framebuffer FB;
@@
- (FB.format->cpp[0])
+ FB.format->cpp[0]

@@
struct drm_framebuffer *FB;
@@
- (FB->format->cpp[0])
+ FB->format->cpp[0]

@@
@@
 struct drm_framebuffer {
 ...
-  int bits_per_pixel;
 ...
 };

v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent)
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

drm: Nuke fb->depth

Replace uses of fb->depth with fb->format->depth. Less duplicate
information is a good thing.

@@
struct drm_framebuffer *fb;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
...
- fb->depth = E;
...
 }

@@
struct nouveau_framebuffer *fb;
@@
- fb->base.depth
+ fb->base.format->depth

@@
struct drm_framebuffer fb;
@@
- fb.depth
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- fb->depth
+ fb->format->depth

@@
struct drm_framebuffer fb;
@@
- (fb.format->depth)
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- (fb->format->depth)
+ fb->format->depth

@@
@@
 struct drm_framebuffer {
 ...
-  unsigned int depth;
 ...
 };

v2: Drop the vmw stuff (Daniel)
    Rerun spatch due to code changes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use drm_framebuffer_plane_{width,height}() where possible

Replace drm_format_plane_{width,height}() usage with
drm_framebuffer_plane_{width,height}() to avoid the lookup of the format
info.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-31-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add drm_framebuffer_plane_{width,height}()

Add variants of drm_format_plane_{width,height}() that take an entire fb
object instead of just the format. These should be more efficent as they
can just look up the format info from the fb->format pointer rather than
having to look it up (using a linear search based on the format).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-30-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Store a pointer to the pixel format info for fbc

Rather than store the pixel format and look up the format info as
needed,  let's just store a pointer to the format info directly
and speed up our lookups.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-29-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/nouveau: Use fb->format rather than drm_format_info()

Let's use the pointer to the format information cached under
drm_framebuffer rather than look it up manually.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-28-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/fb_cma_helper: Replace drm_format_info() with fb->format

Get the format information via the neat fb->format pointer rather than
doing a linear search over all the format info structures.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-27-git-send-email-ville.syrjala@linux.intel.com

drm: Replace drm_format_plane_cpp() with fb->format->cpp[]

Replace drm_format_plane_cpp(fb->pixel_format) with just
fb->format->cpp[]. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
expression E;
@@
(
- drm_format_plane_cpp(a->pixel_format, E)
+ a->format->cpp[E]
|
- drm_format_plane_cpp(b.pixel_format, E)
+ b.format->cpp[E]
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
expression E;
@@
(
- drm_format_plane_cpp(a->fb->pixel_format, E)
+ a->fb->format->cpp[E]
|
- drm_format_plane_cpp(b.fb->pixel_format, E)
+ b.fb->format->cpp[E]
)

@@
struct drm_framebuffer *a;
identifier T;
expression E;
@@
  T = a->pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ a->format->cpp[E]
...+>

@@
struct drm_framebuffer b;
identifier T;
expression E;
@@
  T = b.pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ b.format->cpp[E]
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Eliminate the ugly 'fb?:' constructs from the ilk/skl wm code

Don't access plane_state->fb until we know the plane to be visible.
It it's visible, it will have an fb, and thus we don't have to
consider the NULL fb case. Makes the code look nicer.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-25-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Replace drm_format_num_planes() with fb->format->num_planes

Replace drm_format_num_planes(fb->pixel_format) with just
fb->format->num_planes. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- drm_format_num_planes(a->pixel_format)
+ a->format->num_planes
|
- drm_format_num_planes(b.pixel_format)
+ b.format->num_planes
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- drm_format_num_planes(a->fb->pixel_format)
+ a->fb->format->num_planes
|
- drm_format_num_planes(b.fb->pixel_format)
+ b.fb->format->num_planes
)

@@
struct drm_framebuffer *a;
identifier T;
@@
  T = a->pixel_format
<+...
- drm_format_num_planes(T)
+ a->format->num_planes
...+>

@@
struct drm_framebuffer b;
identifier T;
@@
  T = b.pixel_format
<+...
- drm_format_num_planes(T)
+ b.format->num_planes
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com

drm: Reject fbs w/o format info in drm_framebuffer_init()

Any framebuffer that doesn't have proper format information when
drm_framebuffer_init() is called is a bug. Let's warn and return
an error to avoid oopsing the kernel later due to dereferencing the
NULL fb->format pointer.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-23-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/i915: Populate fb->format early for inherited fbs

Make sure the framebuffer format info is available as early as possible
for fbs we inherit from the BIOS. This will allow us to use the fb as
if it was fully formed before we register it.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-22-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Store a pointer to drm_format_info under drm_framebuffer

To avoid having to look up the format information struct every time,
let's just store a pointer to it under drm_framebuffer.

v2: Don't populate the fb->format pointer in drm_framebuffer_init().
    instead we'll treat a NULL format as an error later

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-20-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: Populate fb->dev from drm_helper_mode_fill_fb_struct()

Populating fb->dev before drm_framebuffer_init() allows us to use
fb->dev already while validating the framebuffer. Let's have
drm_helper_mode_fill_fb_struct() do that for us.

Also make drm_framebuffer_init() warn us if a different device
pointer is passed to it than was passed to
drm_helper_mode_fill_fb_struct().

v2: Reject fbs with invalid fb->dev (Laurent)

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-19-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Set fb->dev early on for inherited fbs

We want the fbs inherited from the BIOS to be more or less fully working
prior to actually registering them. This will allow us to just pass the
fb to various helper function instead of having to pass all the
different parameters separately.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-18-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/virtio: Call drm_helper_mode_fill_fb_struct() before drm_framebuffer_init()

We want framebuffers to be mostly useable already before
drm_framebuffer_init() get called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().

Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-17-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/qxl: Call drm_helper_mode_fill_fb_struct() before drm_framebuffer_init()

We want framebuffers to be mostly useable already before
drm_framebuffer_init() is called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Pass 'dev' to drm_helper_mode_fill_fb_struct()

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can
populate fb->dev early. Will make it easier to use the fb before we
register it.

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+      struct drm_device *dev,
     struct drm_framebuffer *fb,
     const struct drm_mode_fb_cmd2 *mode_cmd
     );

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+      struct drm_device *dev,
     struct drm_framebuffer *fb,
     const struct drm_mode_fb_cmd2 *mode_cmd
     )
{ ... }

@@
function func;
identifier dev;
expression E1, E2;
@@
func(struct drm_device *dev, ...)
{
 ...
 drm_helper_mode_fill_fb_struct(
+ dev,
E1, E2);
 ...
}

@@
expression E1, E2;
@@
 drm_helper_mode_fill_fb_struct(
+ dev,
E1, E2);

v2: Rerun spatch due to code changes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com

drm/bridge: analogix_dp: set the DPCD600 during disabling PSR

It looks like the BOE panel FW didn't ack the DPCD600 signal from the
host device, this will cause the panel to hang on the startup display.

The root cause is that we use the fast link mode when we enter and
exit PSR, the issue is gone if we switch from the fast link to main
link mode.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481338159-7189-1-git-send-email-wxt@rock-chips.com

drm/nouveau: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/nouveau: Fix crtc->primary->fb vs. drm_fb fail

So it looks like the code is trying to pick between the passed in fb and
crtc->primary->fb based on that funky 'bool atomic'. But later it will
mix uses of both drm_fb (which was picked by the aforementioned logic)
and crtc->primary->fb. So looks like a bug to me. Let's make it use
drm_fb only.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-11-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/arm: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my ppor
coccinelle skills later.

In some places the local variable was already there, just not used
consistently.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>

drm/arcpgu: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my ppor
coccinelle skills later.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-9-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>

drm/cirrus: Add some local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-8-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/gma500: Add some local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/ast: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/mgag200: Add local 'fb' variable

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/radeon: Use DIV_ROUND_UP()

Use DIV_ROUND_UP() instead of hand rolling it. Just a drive-by change.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-4-git-send-email-ville.syrjala@linux.intel.com

drm/radeon: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-3-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Add local 'fb' variables

Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.

While at it switch over to using the pixel format rather than
depth+bpp.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: bridge: add support for TI ths8135

THS8135 is a configurable video DAC, but no configuration is actually
necessary to make it work.

For now use the dumb-vga-dac driver to support it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-4-git-send-email-bgolaszewski@baylibre.com

drm: bridge: add DT bindings for TI ths8135

THS8135 is a configurable video DAC. Add DT bindings for this chip.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.com

drm/fsl: don't use drm_put_dev

fsl is already fully demidlayered in the probe function, but for
convenience stuck with drm_put_dev. Call the unregister/unref parts
separately, to make sure this driver works correct.

v2: Rebase.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213175449.24525-1-daniel.vetter@ffwll.ch

drm: mxsfb: drm_dev_alloc() returns error pointers

We should be checking for IS_ERR() instead of NULL because
drm_dev_alloc() returns error pointers.

Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213122332.GA7519@elgon.mountain

Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux into drm-misc-next

Main pull request for drm for 4.10 kernel - resync drm-misc with full
4.10 state (2 new drivers) so that we can start pulling in all the
refactorings for 4.11!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm: Use atomic state for FB in legacy ioctls

If atomic state is available, use this to read the current plane in
GetCrtc/GetPlane, rather than the legacy points.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213181912.92904-1-daniels@collabora.com

drm_fourcc: Fix DRM_FORMAT_MOD_LINEAR #define

We need to define DRM_FORMAT_MOD_VENDOR_NONE for the fourcc_mod_code()
macro to work correctly.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481657272-25975-1-git-send-email-hoegsberg@google.com

drm/etnaviv: Use drm_dev_unref, not drm_put_dev

drm_put_dev is the old midlayer-broken device cleanup function, but
etnaviv has a proper unbind function which first unregisters and then
drops the final reference. No functional change since
drm_dev_unregister happens to be idempotent.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208110739.24417-1-daniel.vetter@ffwll.ch

drm/mediatek: don't use drm_put_dev

fsl is already fully demidlayered in the probe function, but for
convenience stuck with drm_put_dev. Call the unregister/unref parts
separately, to make sure this driver works correct.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208110739.24417-3-daniel.vetter@ffwll.ch

dma-buf: Final bits of doc polish

- Put all the remaing bits of the old doc into suitable places in the
  new sphinx world.
- Also document the poll support, we forgot to do that.
- Delete dma-buf-sharing.txt.

v2: Don't forget to update MAINTAINERS.

Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209215055.3492-1-daniel.vetter@ffwll.ch

dma-buf: Update cpu access documentation

- Again move the information relevant for driver writers next to the
  callbacks.
- Put the overview and userspace interface documentation into a DOC:
  section within the code.
- Remove the text that mmap needs to be coherent - since the
  DMA_BUF_IOCTL_SYNC landed that's no longer the case. But keep the text
  that for pte zapping exporters need to adjust the address space.
- Add a FIXME that kmap and the new begin/end stuff used by the SYNC
  ioctl don't really mix correctly. That's something I just realized
  while doing this doc rework.
- Augment function and structure docs like usual.

Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: fix cosmetic issues]
Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-5-daniel.vetter@ffwll.ch

dma-buf: Reorganize device dma access docs

- Put the initial overview for dma-buf into dma-buf.rst.
- Put all the comments about detailed semantics into the right
  kernel-doc comment for functions or ops structure member.
- To allow that detail, switch the reworked kerneldoc to inline style
  for dma_buf_ops.
- Tie everything together into a much more streamlined overview
  comment, relying on the hyperlinks for all the details.
- Also sprinkle some links into the kerneldoc for dma_buf and
  dma_buf_attachment to tie it all together.

Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-4-daniel.vetter@ffwll.ch

dma-buf: Update kerneldoc for sync_file_create

This was missed when adding a dma_fence_get call. While at it also
remove the kerneldoc for the static inline helper - no point
documenting internals down to every detail.

Fixes: 30cd85dd6edc ("dma-buf/sync_file: hold reference to fence when creating sync_file")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-3-daniel.vetter@ffwll.ch

Merge tag 'docs-4.10' of git://git.lwn.net/linux into drm-misc-next

Backmerge the docs-next branch from Jon into drm-misc so that we can
apply the dma-buf documentation cleanup patches. Git found a conflict
where there was none because both drm-misc and docs had identical
patches to clean up file rename issues in the rst include directives.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/hisilicon: Don't set drm_device->platformdev

It's deprecated and only should be used by drivers which still use
drm_platform_init, not by anyone else.

And indeed it's entirely unused and can be nuked.

This required a bit more fudging, but I guess kirin_dc_ops really
wants to operate on the platform_device, not something else. Also
bonus points for implementing abstraction, and then storing the vfunc
in a global variable.

v2: Don't break the build soooo badly :(
Note that the cleanup function is a bit confused: ade_data was never
set as drvdata, and calling drm_crtc_cleanup directly is a bug - this
is called indirectly through drm_mode_config_cleanup, which calls into
crtc->destroy, which already has the call to drm_crtc_cleanup. Which
means we can just nuke it.

Note this is the 2nd attempt after the first one failed and had to be
reverted again in

commit 9cd2e854d61ccfa51686f3ed7b0c917708fc641f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 17 13:59:40 2016 +0200

    Revert "drm/hisilicon: Don't set drm_device->platformdev"

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209141944.22121-1-daniel.vetter@ffwll.ch

drm: Enforce BKL-less ioctls for modern drivers

With the last round of changes all ioctls called by modern drivers now
have their own locking. Everything else is only allowed for legacy
drivers and hence the lack of locking doesn't matter.

One exception is nouveau, due to the DRIVER_KMS_LEGACY_CONTEXT flag.
But that only works its magic on the context and bufs ioctls. And
drm_bufs.c is protected with dev->struct_mutex, and drm_context.c by
the same and dev->ctxlist_mutex. That should be all safe, and we can
finally mandata drm-bkl-less ioctls for everyone!

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-3-daniel.vetter@ffwll.ch

drm: setclientcap doesn't need the drm BKL

It only updates per-file feature flags. And all the ioctl which change
behaviour depending upon these flags (they're all kms features) do
_not_ hold the BKL. Therefor this is pure cargo-cult and can be
removed.

Note that there's a risk that the ioctl will behave inconsistently
when userspace is racing with itself, but that's ok. The only thing
it's not allowed to do is oops the kernel, and from an audit all
places are safe.

v2: Clarify that the inconsistency is only when userspace races
(Chris).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-2-daniel.vetter@ffwll.ch

drm: Protect master->unique with dev->master_mutex

No one looks at the major/minor versions except the unique/busid
stuff. If we protect that with the master_mutex (since it also affects
the unique of each master, oh well) we can mark these two IOCTL with
DRM_UNLOCKED.

While doing this I realized that the comment for the magic_map is
outdated, I've forgotten to update it in:

commit d2b34ee62b409a03c6fe43c07b779983be51d017
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 17 09:33:21 2016 +0200

    drm: Protect authmagic with master_mutex

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-1-daniel.vetter@ffwll.ch

drm_fourcc: Document linear modifier

Not setting the fb modifiers flag is something different from setting
the fb modifiers to 0 (which means explicitly linear). We kinda failed
to document that properly. Spotted by Kristian.

Cc: hoegsberg@google.com
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478694996-4200-1-git-send-email-daniel.vetter@ffwll.ch

Merge branch 'linux-4.10' of git://github.com/skeggsb/linux into drm-next

- Regression fix from atomic conversion (rotation on the original G80).
- Concurrency fix when clearing compression tags.
- Fixes DP link training issues on GP102/4/6.
- Fixes backlight handling in the presence of Apple GMUX.
- Improvements to GPU error recovery in a number of scenarios.
- GP106 support.

* 'linux-4.10' of git://github.com/skeggsb/linux:
  drm/nouveau/kms/nv50: fix atomic regression on original G80
  drm/nouveau/bl: Do not register interface if Apple GMUX detected
  drm/nouveau/bl: Assign different names to interfaces
  drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
  drm/nouveau/ltc: protect clearing of comptags with mutex
  drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
  drm/nouveau/core: recognise GP106 chipset
  drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
  drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
  drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
  drm/nouveau/fifo/gf100-: recover from host mmu faults

Merge tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.10-rc1

This has a couple of fixes for IOMMU support and some fixes for error
handling.

* tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Set sgt pointer in BO pin
  drm/tegra: Support kernel mappings with IOMMU
  gpu: host1x: Add locking to syncpt
  gpu: host1x: Store device address to all bufs
  drm/tegra: gem: Remove some dead code
  drm/tegra: sor: No need to free devm_ allocated memory
  drm/tegra: Fix error handling
  drm/tegra: dpaux: Fix error handling

Merge tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.10-rc1

This adds support for a couple more panels to the simple-panel driver.
There is also a fix for a long-standing bug, but it's not critical since
no code will currently trigger it.

* tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for AUO G185HAN01
  drm/panel: simple: Add support for AUO G133HAN01
  drm/panel: simple: Add more properties to Innolux G121I1-L01
  drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31
  drm/panel: simple: Check against num_timings when setting preferred for timing
  drm/panel: Add support for Chunghwa CLAA070WP03XG panel
  drm/panel: simple: Add NVD9128 as a simple panel
  drm/panel: simple: Add support for AUO T215HVN01
  drm/panel: simple: Add support for Sharp LQ150X1LG11 panels
  dt-bindings: display: Add Sharp LQ150X1LG11 panel binding

Merge tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next

single fix for backwards compat.

* tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc:
  drm: Add fake controlD* symlinks for backwards compat

Merge tag 'drm-vc4-next-2016-12-09' of https://github.com/anholt/linux into drm-next

This pull request brings in VEC (TV-out) support for vc4, along with a
pageflipping race fix.

* tag 'drm-vc4-next-2016-12-09' of https://github.com/anholt/linux:
  drm/vc4: Don't use drm_put_dev
  drm/vc4: Document VEC DT binding
  drm/vc4: Add support for the VEC (Video Encoder) IP
  drm: Add TV connector states to drm_connector_state
  drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
  drm/vc4: Fix ->clock_select setting for the VEC encoder
  drm/vc4: Fix race between page flip completion event and clean-up

drm/nouveau/kms/nv50: fix atomic regression on original G80

Reported-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bl: Do not register interface if Apple GMUX detected

The Apple GMUX is the one managing the backlight, so there is no need for
Nouveau to register its own backlight interface.

v2: Do not split information message on two lines as it prevents from grepping
    it, as pointed out by Lukas Wunner

v3: Add a missing end-of-line character to the printed message

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bl: Assign different names to interfaces

Currently, every backlight interface created by Nouveau uses the same name,
nv_backlight. This leads to a sysfs warning as it tries to create an already
existing folder. This patch adds a incremented number to the name, but keeps
the initial name as nv_backlight, to avoid possibly breaking userspace; the
second interface will be named nv_backlight1, and so on.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86539

v2:
* Switch to using ida for generating unique IDs, as suggested by Ilia Mirkin;
* Allocate backlight name on the stack, as suggested by Ilia Mirkin;
* Move `nouveau_get_backlight_name()` to avoid forward declaration, as
  suggested by Ilia Mirkin;
* Fix reference to bug report formatting, as reported by Nick Tenney.

v3:
* Define a macro for the size of the backlight name, to avoid defining
  it multiple times;
* Use snprintf in place of sprintf.

v4:
* Do not create similarly named interfaces when reaching the maximum
  amount of unique names, but fail instead, as pointed out by Lukas Wunner

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc: protect clearing of comptags with mutex

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: recognise GP106 chipset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas

TTM was changed a while back to allow for pipelining of buffer moves, and
part of this was the removal of waiting for a BO to idle before calling
move(), placing the responsibility on the driver to do this if required.

That's all well and good, except, we make use of move_notify() to handle
mapping/unmapping from the GPU VMM as move() isn't called on all paths.

This commit adds a wait before unmapping from a VMM in move_notify(), to
prevent GPU page faults where a buffer is still being accessed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.8+]

drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr/gf100-: properly ack all FECS error interrupts

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/gf100-: recover from host mmu faults

This has been on the TODO list for a while now, recovering from things
such as attempting to execute a push buffer or touch a semaphore in an
unmapped memory area.

The only thing required on the HW side here is that the offending
channel is removed from the runlist, and *not* a full reset of PFIFO.

This used to be a bit messier to handle before the rework to make use
of engine topology info, but is apparently now trivial.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm: Simplify GETRESOURCES ioctl

Looping twice when we can do it once is silly. Also use a consistent
style. Note that there's a good race with the connector list walking,
since that is no longer protected by mode_config.mutex. But that's for
a later patch to fix.

v2: Actually try to not blow up, somehow I lost the hunk that checks
we don't copy too much. Noticed by Chris.

v3:
- squash all drm_mode_getresources cleanups into one
- use consistent style for walking objects (Chris)

v4:
- Use u64_to_user_ptr (Chris)
- Don't forget to copy the last connector (Chris)

v5: Chris was right ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161211192019.29603-1-daniel.vetter@ffwll.ch

dma-buf: Provide wrappers for reservation's lock

Joonas complained that writing ww_mutex_lock(&resv->lock, ctx) was too
intrusive compared to reservation_object_lock(resv, ctx);

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115154642.31850-1-chris@chris-wilson.co.uk

dma-buf: Extract dma-buf.rst

Just prep work to polish and consolidate all the dma-buf related
documenation.

Unfortunately I didn't discover a way to both integrate this new file
into the overall toc while keeping it at the current place. Work
around that by moving it into the overall driver-api/index.rst.

Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

drm: Add fake controlD* symlinks for backwards compat

We thought that no userspace is using them, but oops libdrm is using
them to figure out whether a driver supports modesetting. Check out
drmCheckModesettingSupported but maybe don't because it's horrible and
totally runs counter to where we want to go with libdrm device
handling. The function looks in the device hierarchy for whether
controlD* exist using the following format string:

/sys/bus/pci/devices/%04x:%02x:%02x.%d/drm/controlD%d

The "/drm" subdirectory is the glue directory from the sysfs class
stuff, and the only way to get at it seems to through
kdev->kobj.parent (when kdev is represents e.g. the card0 chardev
instance in sysfs). Git grep says we're not the only ones touching
that, so I hope it's ok we dig into such internals - I couldn't find a
proper interface for getting at the glue directory.

Quick git grep shows that at least -amdgpu, -ati are using this.
-modesetting do not, and on -intel it's only about the 4th fallback
path for device lookup, which is why this didn't blow up earlier.

Oh well, we need to keep it working, and the simplest way is to add a
symlink at the right place in sysfs from controlD* to card*.

v2:
- Fix error path handling by adding if (!minor) return checks (David)
- Fix the controlD* numbers to match what's been there (David)
- Add a comment what exactly userspace minimally needs.
- Correct the analysis for -intel (Chris).

Fixes: 8a357d10043c ("drm: Nerf DRM_CONTROL nodes")
Cc: Dave Airlie <airlied@gmail.com>
Reported-and-tested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209135656.14881-1-daniel.vetter@ffwll.ch

drm/vc4: Don't use drm_put_dev

vc4 already has a proper load sequence, but the unload one needed some
fixups: First unregister, and last drop the final ref.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Document VEC DT binding

Document the DT binding for the VEC (Video EnCoder) IP.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>

drm/vc4: Add support for the VEC (Video Encoder) IP

The VEC IP is a TV DAC, providing support for PAL and NTSC standards.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm: Add TV connector states to drm_connector_state

Some generic TV connector properties are exposed in drm_mode_config, but
they are currently handled independently in each DRM encoder driver.

Extend the drm_connector_state to store TV related states, and modify the
drm_atomic_connector_{set,get}_property() helpers to fill the connector
state accordingly.

Each driver is then responsible for checking and applying the new config
in its ->atomic_mode_{check,set}() operations.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum

List of values like the DRM_MODE_SUBCONNECTOR_xx ones are better
represented with enums.

Turn the DRM_MODE_SUBCONNECTOR_xx macros into an enum.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/vc4: Fix ->clock_select setting for the VEC encoder

PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and
rework the vc4_set_crtc_possible_masks() to cover the full range of the
PV_CONTROL_CLK_SELECT field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Merge tag 'drm-fsl-dcu-for-next' of git.agner.ch/git/linux-drm-fsl-dcu into drm-next

Some fixes and cleanup, mainly around fbdev emulation. It also adds a
new module parameter which allows to specify the color depth/bpp for
the fbdev emulation (like the IMX DRM driver).

* tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: introduce kernel parameter to specify fbdev depth
  drm/fsl-dcu: remove separate compilation unit for fbdev emulation
  drm/fsl-dcu: Propagate the real error code
  drm/fsl-dcu: Remove unneeded NULL check
  drm/fsl-dcu: disable outputs before unloading driver
  drm/fsl-dcu: unload driver before disabling clocks

Merge tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another pile of misc stuff, final one for 4.10. If there's some serious
bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with
intel), otherwise this is it and next pull next year for 4.11.

Most interesting bits are probably Chris' fb helper fixes against mst
hotplug oopses.

* tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits)
  drm: Take ownership of the dmabuf->obj when exporting
  drm: Allow CAP_PRIME on !MODESET
  drm/fence: add drm_crtc_create_fence()
  drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR
  drm/atomic: doc: remove old comment about nonblocking commits
  drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
  drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
  drm/amdgpu: don't add files at control minor debugfs directory
  drm: allow changing DPMS mode
  drm/qxl: fix use of uninitialized variable
  drm/qxl: Don't register debugfs for control minors
  drm/radeon: don't add files at control minor debugfs directory
  drm/vmwgfx: Switch to mode_cmd2
  drm/vgem: Use ww_mutex_(un)lock even with a NULL context
  drm: Make the connector .detect() callback optional
  drm/bridge: tc358767: don't warn if display side ASSR enable fails
  drm: Initialise drm_mm.head_node.allocated
  drm: Fix locking cargo-cult in encoder/plane init/cleanup
  drm/doc: Fix indenting in drm_modeset_lock.c comment
  drm: Protect fb_helper list manipulation with a mutex
  ...

Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next

Misc fixes and cleanups for 4.10. Highlights:
- Cursor fixes for radeon and amdgpu
- DPM fixes for some new SI variants
- Powerplay fixes
- Clock and powergating fixes

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (39 commits)
  drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
  drm/amdgpu: use pin rather than pin_restricted in a few cases
  drm/amd/powerplay: use pr_debug to print function not implemented message
  drm/amd/amdgpu: Add gpr reading for GFX v7
  drm/amd/amdgpu: Add gpr reading for GFX v6
  drm/amd/amdgpu: Add debugfs support for reading GPRs (v2)
  drm/amd/amdgpu: export vbios information (v2)
  drm/amd/amdgpu: stored bios_size
  drm/amdgpu: update golden setting of tonga
  drm/amdgpu/si: load the proper firmware on 0x87 oland boards
  drm/amdgpu: add additional pci revision to dpm workaround
  drm/radeon/si: load the proper firmware on 0x87 oland boards
  drm/radeon: add additional pci revision to dpm workaround
  drm/amd/powerplay: Fix potential NULL pointer issue
  drm/amdgpu: Don't touch GFX hw during HW fini
  drm/amd/powerplay: Adjust the position of data size initial
  drm/amd/powerplay: Ignore smu buffer usage
  drm/amd/powerplay: cut digest part
  drm/amdgpu: drop redundant vi_mqd define
  drm/amdgpu: fix gtt available page num accounting
  ...

Merge tag 'omapdrm-4.10-fixes' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm fixes for v4.10

* fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail
* fix omapdrm primary plane allocation bug, which makes the display to fail to
  come up

* tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  drm/omap: tpd12s015: fix error handling
  drm/omap: fix primary-plane's possible_crtcs
  drm: fix possible_crtc's type

drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well

Looks like this was missed when dce_v6_0.c was added.

Fixes: e2cdf640cbb5 ("drm/amdgpu: add display controller implementation for si v10")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: use pin rather than pin_restricted in a few cases

We don't require a resticted pinning in these cases, so just
use plain pin.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use pr_debug to print function not implemented message

For CZ, some function pointers like display_configuration_changed
are not set. So when HW manager tries to configure display, we
end up with messages like

"[ powerplay ] this function not implement!"

in the logs. This message is informational, but lacks details
on which function is not implemented and why.

Rather than using KERN_INFO to print the message everytime the
system boots, we rather use pr_debug so that it is only printed
when debug prints are enabled at runtime.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add gpr reading for GFX v7

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add gpr reading for GFX v6

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add debugfs support for reading GPRs (v2)

Implemented for SGPRs for GFX v8 initially.

(v2) cleanup minor whitespace and remove sanity check and
     addressing is in dwords not bytes

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: export vbios information (v2)

Allows userspace components to fetch information
from the vbios image.

v2: agd: fix warning

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: stored bios_size

It's necessary if we want to export vbios image out.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/atomic: Use active instead of enable in wait_for_vblanks.

When DPMS was introduced to atomic, vblanks only worked when the crtc
was enabled and active. wait_for_vblanks were not converted to check for
crtc_state->active, which may cause an attempt for vblank_get to fail.

This is probably harmless, but convert from enable to active anyway.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-2-git-send-email-maarten.lankhorst@linux.intel.com

drm: Update drm_device docs about embedding.

It's supported now! Spotted while reviewing Chris' patch to add a
release hook.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208102847.3063-1-daniel.vetter@ffwll.ch

drm/omap: tpd12s015: fix error handling

tpd12s015 driver is missing error value handling for gpio
initialization, causing 0 to be returned as an error if gpiod_get_*
fails. This may cause deferred probing to fail.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix primary-plane's possible_crtcs

We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
which is fine as the HW planes can be used fro all crtcs. However, when
we're doing that, we are still incrementing 'num_crtcs', and we'll end
up with bad possible_crtcs, preventing the use of the primary planes.

This patch passes a possible_crtcs mask to plane init function so that
we get correct possible_crtc.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: fix possible_crtc's type

drm_universal_plane_init() and drm_plane_init() take "unsigned long
possible_crtcs" parameter, but then stuff it into uint32_t. Change the
parameter to uint32_t.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm: Take ownership of the dmabuf->obj when exporting

Currently the reference for the dmabuf->obj is incremented for the
dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace
interface), but is released in drm_gem_dmabuf_release() (the lowlevel
handler). Improve the symmetry of the dmabuf->obj ownership by acquiring
the reference in drm_gem_dmabuf_export(). This makes it easier to use
the prime functions directly.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Update kerneldoc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk

drm: Allow CAP_PRIME on !MODESET

vgem (and our igt tests using vgem) need this. I suspect etnaviv will
fare similarly.

v2. Make it build. Oops.

Fixes: d5264ed3823a ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver")
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch

Merge tag 'meson-drm-for-4.10' of github.com:superna9999/linux into drm-next

Add support for the Amlogic Meson Video Processing Unit
- Only CVBS/Composite output for Amlogic Meson GXBB/GXL/GXM SoCs
- Add MAINTAINERS entry
- Add DT bindings documentation

* tag 'meson-drm-for-4.10' of github.com:superna9999/linux:
  MAINTAINERS: add entry for Amlogic DRM drivers
  dt-bindings: display: add Amlogic Meson DRM Bindings
  drm: Add support for Amlogic Meson Graphic Controller

Merge tag 'drm-intel-next-fixes-2016-12-07' of git://anongit.freedesktop.org/git/drm-intel into drm-next

first set of fixes for -next.

* tag 'drm-intel-next-fixes-2016-12-07' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Move priority bumping for flips earlier
  drm/i915: Hold a reference on the request for its fence chain
  drm/i915/audio: fix hdmi audio noise issue
  drm/i915/debugfs: Increment return value of gt.next_seqno
  drm/i915/debugfs: Drop i915_hws_info
  drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time
  drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things
  drm/i915: Make skl_write_{plane,cursor}_wm() static
  drm/i915: Complete requests in nop_submit_request
  drm/i915/gvt: fix lock not released bug for dispatch_workload() err path
  drm/i915/gvt: fix getting 64bit bar size error
  drm/i915/gvt: fix missing init param.primary

drm: mxsfb: Select DRM_PANEL

Select DRM_PANEL, since the MXSFB driver depends on it. Otherwise,
we get the following error when compiling:

drivers/built-in.o: In function `mxsfb_probe':
core.c:(.text+0x9ce9c): undefined reference to `drm_panel_attach'
core.c:(.text+0x9cff0): undefined reference to `drm_panel_detach'
drivers/built-in.o: In function `mxsfb_panel_connector_destroy':
core.c:(.text+0x9d614): undefined reference to `drm_panel_detach'
drivers/built-in.o: In function `mxsfb_create_output':
core.c:(.text+0x9d68c): undefined reference to `of_drm_find_panel'
make: *** [Makefile:962: vmlinux] Error 1

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/fence: add drm_crtc_create_fence()

Instead of dealing with crtc details inside drm_atomic.c we should
just export a function that creates a new crtc fence for us and
use that.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481046437-18778-1-git-send-email-gustavo@padovan.org

drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR

We will ignored PSR setting if panel not support it. So, in this case,
we should return from analogix_dp_enable/disable_psr() without any
error code. Let's retrun 0 instead of -EINVAL when panel not support PSR
in analogix_dp_enable/disable_psr().

Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481072253-8917-1-git-send-email-wzz@rock-chips.com

drm/amdgpu: update golden setting of tonga

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>