[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear

Each backing_dev needs to be able to report whether it is congested, either by
modulating BDI_*_congested in ->state, or by defining a ->congested_fn.
md/raid did neither of these.  This patch add a congested_fn which simply
checks all component devices to see if they are congested.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Improve locking around error handling

The error handling routines don't use proper locking, and so two concurrent
errors could trigger a problem.

So:
  - use test-and-set and test-and-clear to synchonise
    the In_sync bits with the ->degraded count
  - use the spinlock to protect updates to the
    degraded count (could use an atomic_t but that
    would be a bigger change in code, and isn't
    really justified)
  - remove un-necessary locking in raid5

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Remove working_disks from raid1 state data

It is equivalent to conf->raid_disks - conf->mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Factor out part of raid1d into a separate function

raid1d has toooo many nested block, so take the fix_read_error functionality
out into a separate function.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove unnecessary variable x in stripe_to_pdidx()

Signed-off-by: Coywolf Qi Hunt <qiyong@freeforge.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: new sysfs interface for setting bits in the write-intent-bitmap

Add a new sysfs interface that allows the bitmap of an array to be dirtied.
The interface is write-only, and is used as follows:

echo "1000" > /sys/block/md2/md/bitmap

(dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk
bitmaps of array md2)

echo "1000-2000" > /sys/block/md1/md/bitmap

(dirty the bits for chunks 1000-2000 in md1's bitmap)

This is useful, for example, in cluster environments where you may need to
combine two disjoint bitmaps into one (following a server failure, after a
secondary server has taken over the array).  By combining the bitmaps on
the two servers, a full resync can be avoided (This was discussed on the
list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove 'working_disks' from raid10 state

It isn't needed as mddev->degraded contains equivalent info.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove the working_disks and failed_disks from raid5 state data.

They are not needed.  conf->failed_disks is the same as mddev->degraded and
conf->working_disks is conf->raid_disks - mddev->degraded.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: replace magic numbers in sb_dirty with well defined bit flags

Instead of magic numbers (0,1,2,3) in sb_dirty, we have
some flags instead:
MD_CHANGE_DEVS
   Some device state has changed requiring superblock update
   on all devices.
MD_CHANGE_CLEAN
   The array has transitions from 'clean' to 'dirty' or back,
   requiring a superblock update on active devices, but possibly
   not on spares
MD_CHANGE_PENDING
   A superblock update is underway.

We wait for an update to complete by waiting for all flags to be clear.  A
flag can be set at any time, even during an update, without risk that the
change will be lost.

Stop exporting md_update_sb - isn't needed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: factor out part of raid10d into a separate function.

raid10d has toooo many nested block, so take the fix_read_error functionality
out into a separate function.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix a comment that is wrong in raid5.h

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: the scheduled removal of the START_ARRAY ioctl for md

This patch contains the scheduled removal of the START_ARRAY ioctl for md.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm table: add target flush

This patch adds support for a per-target dm_flush_fn method.  This is needed
to allow dm-loop to invalidate page cache mappings in response to BLKFLSBUF
ioctl commands.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: extract device limit setting

Separate the setting of device I/O limits from dm_get_device().  dm-loop will
use this.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: use private biosets

I found a problem within device-mapper that occurs in low-mem situations.  It
was found using a mirror target but I think in theory it would hit any setup
that stacks device-mapper devices (like LVM on top of multipath).

Since device-mapper core uses the common fs_bioset in clone_bio(), and a
private, but still global, bio_set in split_bvec() it is possible that the
filesystem and the first level target successfully get bios but the lower
level target doesn't because there is no more memory and the pool was drained
by upper layers.  So the remapping will be stuck forever.  To solve this
device-mapper core needs to use a private bio_set for each device.

Signed-off-by: Stefan Bader <Stefan.Bader@de.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm crypt: use private biosets

In the low memory situation dm-crypt needs to use a private mempool of bios to
avoid blocking.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm crypt: move io to workqueue

This patch is designed to help dm-crypt comply with the
new constraints imposed by the following patch in -mm:
  md-dm-reduce-stack-usage-with-stacked-block-devices.patch

Under low memory the existing implementation relies upon waiting for I/O
submitted recursively to generic_make_request() completing before the original
generic_make_request() call can return.

This patch moves the I/O submission to a workqueue so the original
generic_make_request() can return immediately.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm crypt: restructure write processing

Restructure the dm-crypt write processing in preparation for workqueue changes
in the next patches.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm crypt: restructure for workqueue change

Restructure part of the dm-crypt code in preparation for workqueue changes.

Use 'base_bio' or 'clone' variable names consistently throughout.  No
functional changes are included in this patch.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm crypt: add key msg

Add the facility to wipe the encryption key from memory (for example while a
laptop is suspended) and reinstate it later (when the laptop gets resumed).

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm table: add target preresume

This patch adds a target preresume hook.

It is called before the targets are resumed and if it returns an error the
resume gets cancelled.

The crypt target will use this to indicate that it is unable to process I/O
because no encryption key has been supplied.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: add debug macro

Add CONFIG_DM_DEBUG and DMDEBUG() macro.

Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: add uevent change event on resume

Device-mapper devices are not accessible until a 'resume' ioctl has been
issued.  For userspace to find out when this happens we need to generate an
uevent for udev to take appropriate action.

As discussed at OLS we should send 'change' events for 'resume'.  We can think
of no useful purpose served by also having 'suspend' events.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm mpath: use kzalloc

Use kzalloc() instead of kmalloc() + memset().

Signed-off-by: Micha³ Miros³aw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm mpath: tidy ctr

After initialising m->ti, there's no need to pass it in subsequent calls to
static functions used for parsing parameters.

Signed-off-by: Micha³ Miros³aw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm mirror: remove trailing space from table

Remove trailing space from 'dmsetup table' output.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: fix freeing pending exception

If a snapshot became invalid while there are outstanding pending_exceptions,
when pending_complete() processes each one it forgets to remove the
corresponding exception from its exception table before freeing it.

Fix this by moving the 'out:' label up one statement so that
remove_exception() is always called.  Then __invalidate_exception() no longer
needs to call it and its 'pe' argument become superfluous.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: tidy pe ref counting

Rename sibling_count to ref_count and introduce get and put functions.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: add workqueue

Add a workqueue so that I/O can be queued up to be flushed from a separate
thread (e.g.  if local interrupts are disabled).

A new per-snapshot spinlock pe_lock is introduced to protect queued_bios.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: tidy pending_complete

This patch rearranges the pending_complete() code so that the functional
changes in subsequent patches are clearer.

By consolidating the error and the non-error paths, we can move
error_snapshot_bios() and __flush_bios() in line.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: tidy snapshot_map

This patch rearranges the snapshot_map code so that the functional changes in
subsequent patches are clearer.

The only functional change is to replace the existing read lock with a write
lock which the next patch needs.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: fix metadata writing when suspending

When suspending a device-mapper device, dm_suspend() sleeps until all
necessary I/O is completed.  This state is triggered by a callback from
persistent_commit().  But some I/O can still be issued *after* the callback
(to prepare the next metadata area for use if the current one is full).  This
patch delays the callback until after that I/O is complete.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: make read and write exception functions void

read_exception() and write_exception() only return an error if supplied with
an out-of-range index.  If this ever happens it's the result of a bug in the
calling code so we handle this with an assertion and remove the error handling
in the callers.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: fix metadata error handling

Fix the error handling when store.read_metadata is called: the error should be
returned immediately.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: allow zero chunk_size

The chunk size of snapshots cannot be changed so it is redundant to require it
as a parameter when activating an existing snapshot.  Allow a value of zero in
this case and ignore it.  For a new snapshot, use a default value if zero is
specified.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: fix invalidation ENOMEM

Fix ENOMEM error sign.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: fix alloc_dev error path

While reading the code I found a bug in the error path in alloc_dev in dm.c

When blk_alloc_queue fails there is no call to free_minor.

This patch fixes the problem.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: support ioctls on mapped devices: fix with fake file

The new ioctl code passes the wrong file pointer to the underlying device.
No file pointer is available so make a temporary fake one.

ioctl_by_bdev() does set_fs(KERNEL_DS) so it's for ioctls originating
within the kernel and unsuitable here.  We are processing ioctls that
originated in userspace and mapping them to different devices.  Fixing the
existing callers that pass a NULL file struct and consolidating the
fake_file users are separate matters to solve in later patches.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: export blkdev_driver_ioctl

Export blkdev_driver_ioctl for device-mapper.

If we get as far as the device-mapper ioctl handler, we know the ioctl is not
a standard block layer BLK* one, so we don't need to check for them a second
time and can call blkdev_driver_ioctl() directly.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm mpath: support ioctls

When an ioctl is performed on a multipath device simply pass it on to the
underlying block device through current_path.  If current path is not yet
selected, select it.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm linear: support ioctls

When an ioctl is performed on a device with a linear target, simply pass it on
to the underlying block device.

Note that the ioctl will pass through the filtering in blkdev_ioctl() twice.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: support ioctls on mapped devices

Extend the core device-mapper infrastructure to accept arbitrary ioctls on a
mapped device provided that it has exactly one target and it is capable of
supporting ioctls.

[We can't use unlocked_ioctl because we need 'inode': 'file' might be NULL.
Is it worth changing this?]

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Arnd Bergmann <arnd@arndb.de> wrote:

> Am Wednesday 21 June 2006 21:31 schrieb Alasdair G Kergon:
> > static struct block_device_operations dm_blk_dops = {
> > .open = dm_blk_open,
> > .release = dm_blk_close,
> > +.ioctl = dm_blk_ioctl,
> > .getgeo = dm_blk_getgeo,
> > .owner = THIS_MODULE
>
> I guess this also needs a ->compat_ioctl method, otherwise it won't
> work for ioctl numbers that have a compat_ioctl implementation in the
> low-level device driver.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidia fbdev: fix powerpc xmon scribbles

xmon writes garbage on the screen because the nvidia console driver has
changed the line pitch from what the firmware set it to.  Fix it by making
the nvidia driver inform the btext engine (which xmon uses if the screen is
its output device) about changes to display resolution.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: correct buffer size limit in fbmem_read_proc()

Address http://bugzilla.kernel.org/show_bug.cgi?id=7189

It should check `clen', not `len'.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <jurij@wooyd.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <stable@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] radeonfb supend/resume support for Acer Aspire 2010

This patch adds suspend/resume support for the graphics chip in the
Acer Aspire 2010: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
01:00.0 0300: 1002:4e50 (prog-if 00 [VGA])
        Subsystem: 1025:0061
        Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 16
        Memory at a8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at c100 [size=256]
        Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at a0000000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
        Capabilities: [50] Power Management version 2

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@mgx.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Benjamin A. Okopnik" <ben@linuxgazette.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Documentation fixes in intel810.txt

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sstfb: cleanups

- Remove 24/32bit unused support (the chips don't do 24/32bit anyway)
- Clean up printk obfuscation
- Clean up lispitus in the if(())()) stuff
- Minor tidying

No functionality changes, may have a crack at hardware scrolling based
on my X driver once the cleanups are in.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vt: proper prototypes for some console functions

This patch adds proper prototypes to header files for three console init
functions used on drivers/char/vt.c

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon:: make 3 functions static

This patch makes three needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Fix framebuffer size smaller than requested

This patch fixes a bug where we obtain a smaller resolution than requested.
(eg: in 640x480, only 639x479 usable pixels).

This was due to 1 being substracted from the xres and yres vars two times:
first in mbxfb.c and then in the macros from reg_bits.h.

This patch removes the minus ones from the mbxfb.c file. Tested and works.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Fix a chip bug? resulting in wrong pixclock

This is a workaround for what I think is a bug in the 2700G chip.

The PLL output frequency is adustable using 3 values (M, N and P.  See code
for formula).  The N value range is documented to be 1 to 7 but when it is set
to 1, the output frequency is lower than it should be (divided by 2), giving
unexpected results such as no sync on a CRT display.

This patch prevents N=1 when searching for the best value for the requested
pixclock.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Possible cleanups

- make the following needlessly global function static:
  - mach64_ct.c: aty_st_pll_ct()
- proper prototypes for the following functions:
  - atyfb_base.c: atyfb_copyarea()
  - atyfb_base.c: atyfb_fillrect()
  - atyfb_base.c: atyfb_imageblit()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/sis_main.h Removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/vgatypes.h: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/sis_main.c: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/sis_accel.h: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/sis_accel.c: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/osdef.h: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/init.h: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/initextlfb.c: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/sis/init301.h: removal of old code

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i810fb: Honor the return value of pci_enable_device

Check the return value of pci_enable_device().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Honor the return value of pci_enable_device

Check the return value of pci_enable_device().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] matroxfb: Honor the return value of pci_register_driver

Check the return value of pci_register_driver()

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Honor the return value of pci_register_driver

Check return value of pci_register_driver().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Honor the return value of device_create_file

Check the return value of device_create_file().  If return is 'fail', remove
attributes by calling device_remove_file().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Honor the return value of device_create_file

Check the return value of device_create_file().  If return is 'fail', remove
attributes by calling device_remove_file().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vt: Honor the return value of device_create_file

Check the return value of device_create_file().  If return is 'fail', remove
attributes by calling device_remove_file().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Remove cursor timer if unused

Remove the cursor timer (cursor flashing) on the following conditions:

- if vc is in KD_GRAPHICS mode, ie, when X owns the console
- if vc is blanked

This misbehavior was exposed by Dave Jones.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Use persistent allocation for cursor blinking

Every time the console cursor blinks, we do a kmalloc/kfree pair.  This
patch turns that into a single allocation.

This allocation was the most frequent kmalloc I saw on my test box.

[adaplas]
Per Alan's suggestion, move global variables to fbcon's private structure.
This would also avoid resource leaks when fbcon is unloaded.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] radeonfb: Use generic DDC reading

Uses the generic ddc read functionality in fbmon.c instead of the previous
functionality.

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] savagefb: Use generic DDC reading

Update driver to use generic DDC reading

[khali@linux-fr.org: fix oops in i2c handling]
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jurriaan <thunder7@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i810fb: Use generic DDC reading

Update driver to use generic DDC reading

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rivafb: Use generic DDC reading

Update driver to use generic DDC reading

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Use generic DDC reading

Update driver to use generic DDC reading

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Add generic ddc read functionality

Adds functionality to read the EDID information over the DDC bus in a generic
way.  This code is based on the DDC implementation in the radeon driver.

[adaplas]
- separate from fbmon.c and place in new file fb_ddc.c
- remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature
  will not compile if i2c support is compiled as a module
- feature is selectable only by drivers needing it. It must have a
  'select FB_DDC if xxx' in Kconfig
- change printk's to dev_*, the i2c people prefers it

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vfb: Document option to enable the driver

The Kconfig help text doesnt mention that in order to load the vfb module, you
have to pass in the parameter vfb_enable=1

Document required module options in Kconfig for loading the vfb module.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rivafb: use constants instead of magic values

use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to

Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] intelfb: Documentation update

Correct sample boot line and add a remark on mode setting.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] au1100fb: Add option to enable/disable the cursor

- add cursor enable/disable, very useful if you wish a full screen boot
  logo.

Cursor can be disabled from kernel command line:

   video=au1100fb:nocursor,panel:Toppoly_TD035STED4

or from sysfs interface:

   echo 1 > /sys/module/au1100fb/parameters/nocursor

- fix up some wrong indentation issues.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide-cs (CompactFlash) driver, rm irq warning

Git rid of the runtime warning about pcmcia not supporting exclusive IRQs,
so "the driver needs updating".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IDE: more pci_find cleanup

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Allow ide_generic_all to be used modular and built in

Allow ide/pci/generic to claim chipsets as a a module or when built-in.  It
requires using "all_generic_ide" as a boot option.

Signed-off-by: Patrick Jefferson <henj@hp.com>
Acked-by: Alan Cox <alan@redhat.com>
Closes-Bug: 7017
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: Fix crash on repeated reset

Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated
reset while the IDE layer was already resetting the channel caused a crash,
and provided a rough fix.

This is a slightly cleaner version of the fix which tracks the reset state
and blocks further reset requests while a reset is in progress.

Note this is not a security issue - random end users can't access the
ioctl in question anyway.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] CONFIG_PM=n slim: drivers/ide/pci/sc1200.c

Remove some code which is unneeded if CONFIG_PM=n.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PCMCIA: Add few IDs into ide-cs

Few cards informations submitted by OpenZaurus users.

Seagate 8GB microdrive:
 product info: "SEAGATE", "ST1"
 manfid 0x0111, 0x0000

One CF card:
 product info: "SAMSUNG", "04/05/06", "", ""
 manfid : 0x0000, 0x0000

Ridata 8GB Pro 150X Compact Flash Card:
 product info: "SMI VENDOR", "SMI PRODUCT", ""
 manfid: 0x000a, 0x0000

 product info: "M-Systems", "CF500", ""
 manfid: 0x000a, 0x0000

 product info: "TRANSCEND", "TS4GCF120", ""
 manfid: 0x000a, 0x0000

Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia"

Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: reprogram disk pio timings on resume

Add a step to the IDE PM state machine that reprograms disk PIO timings
as the first step on resume. This prevents ide deadlock on
resume-from-ram on my nforce3-based laptop.

An earlier implementation was written entirely within the amd74xx ide
driver, but Alan helpfully pointed out that this is the correct thing to
do globally. Still, I'm only calling hwif->tuneproc() for disks, based
on two things:

 - The existing state machine is already passed over for non-disk drives
 - Previous testing on my laptop shows that the hangs are related only
   to the disk - suspend/resume from a livecd showed that there's no
   need for this on the cdrom.

Signed-off-by: Jason Lunz <lunz@falooley.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brad Campbell <brad@wasp.net.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: remove dma_base2 field from ide_hwif_t

Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and
without great need.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: John Keller <jpk@sgi.com>
Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/ide/: cleanups

- setup-pci.c: remove the unused ide_pci_unregister_driver()
- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IDE core: driver layer error checking

Check driver layer return values in IDE core.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: backport piix fixes from libata into the legacy driver

There are three flags being set by default by the PIIX driver for speeds >
PIO 1, and one not being cleared properly on fallback to PIO0.  The most
important one is the prefetch/post write control which only works for ATA
and can do bad things with ATAPI.

The patch does its best to set the flags correctly for drivers/ide.  Its
not 100% perfect but its closer than the original.  100% perfect requires
proper IORDY handling but this isn't critical (and its not right in libata
either ..  yet)

Sergei Shtylyov <sshtylyov@ru.mvista.com> said:

> + { 0, 0 },
> + { 0, 0 },
> + { 1, 0 },
> + { 2, 1 },
> + { 2, 3 }, };
>
>   pio = ide_get_best_pio_mode(drive, pio, 5, NULL);

    BTW, there's quite obvious error here which leads to access outside of
timings[] if somebody passes PIO mode 5 (or autotuning code finds out that
drive supports PIO mode 5). Could have been fixed while at it... Those drives
should be rare, though...

> + }
>   master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
>   }
>   pci_write_config_word(dev, master_port, master_data);

    Actually, there's one more serious issue with piix_tune_drive() -- it
doesn't actually set the drive's own transfer mode.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: fix revision comparison in ide_in_drive_list

Fix ide_in_drive_list: drive_table->id_firmware should be searched *in*
id->fw_rev, not vice versa.

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Enable cdrom dma access with pdc20265_old

This patch allows me to use dma with my cd/dvd attached to my on board
pdc20265 ide controller

Alan sayeth:

  Looks sane.  Would be nice to know if there is any documentation
  supporting this hack being safe but the logic makes sense.  The LBA48 case
  faces the same problem - the state machine gets confused about the transfer
  length and needs kicking

Signed-off-by: Tobias Oed <tobiasoed@hotmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Jens Axboe <axboe@suse.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide_dma_speed() fixes

ide_dma_speed() fails to actually honor the IDE drivers' mode support
masks) because of the bogus checks -- thus, selecting the DMA transfer mode
that the driver explicitly refuses to support is possible.  Additionally,
there is no check for validity of the UltraDMA mode data in the drive ID,
and the function is misdocumented.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Make number of IDE interfaces configurable

Make IDE_HWIFS configurable if EMBEDDED

This lets us lop as much as 16k off an x86 build.  It's a little ugly, but
it's dead simple.  Note the fix for HWIFS < 2.

Sizing interfaces dynamically unfortunately turns out to be pretty
major surgery.

add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)
function                                     old     new   delta
ide_hwifs                                  16920    1692  -15228
init_irq                                    1113     750    -363
ideprobe_init                                283     138    -145
ide_pci_setup_ports                         1329    1193    -136
save_match                                    85       -     -85
ide_register_hw_with_fixup                   367     287     -80
ide_setup                                   1364    1308     -56
is_chipset_set                                40       4     -36
create_proc_ide_interfaces                   225     205     -20
init_ide_data                                 84      67     -17
ide_probe_for_cmd640x                       1198    1183     -15
ide_unregister                              1452    1451      -1

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IDE error handling fixes

In 2.6.15.1 I encountered some IDE crashes when unplugging IDE cables to
emulate disk errors.  Below is a patch against 2.6.16 which I think still
applies.

1.  The first BUG_ON could trigger when a PREFLUSH IO fails (it would
   fail the original barrier request which hasn't been marked REQ_STARTED
   yet).

2. the rq could have been dequeued already (same as 1).

3.  HWGROUP(drive)->rq could be NULL because of the ide_error() several
   lines earlier.

Signed-off-by: Hua Zhong <hzhong@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IDE: always release DMA engine

Release the DMA engine for the custom mapping IDE drivers also (for
example, siimage.c does allocate it in both I/O-mapped and custom-mapped
modes).  Remove useless code from the error path of
ide_allocate_dma_engine().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IDE: claim extra DMA ports regardless of channel

- Claim extra DMA I/O ports regardless of what IDE channels are
  present/enabled.

- Remove extra ports handling from ide_mapped_mmio_dma() since it's not
  applicable to the custom-mapping IDE drivers.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] non-libata driver for Jmicron devices

Less functional than libata this just uses the merged interface provided for
dumb legacy OS's.  This is basically a bridge for people not yet ready to use
libata for some reason or another.

Port visibility is entirely dependant on the BIOS setup.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] scheduler: NUMA aware placement of sched_group_allnodes

When the per cpu sched domains are build then they also need to be placed
on the node where the cpu resides otherwise we will have frequent off node
accesses which will slow down the system.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>