GitHub/moto-9609/android_kernel_motorola_exynos9610.git
9 years agoocfs2: implement ocfs2_direct_IO_write
Joseph Qi [Tue, 17 Feb 2015 00:00:00 +0000 (16:00 -0800)]
ocfs2: implement ocfs2_direct_IO_write

Implement ocfs2_direct_IO_write.  Add the inode to orphan dir first, and
then delete it once append O_DIRECT finished.

This is to make sure block allocation and inode size are consistent.

[akpm@linux-foundation.org: fix it for "block: Add discard flag to blkdev_issue_zeroout() function"]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoocfs2: add orphan recovery types in ocfs2_recover_orphans
Joseph Qi [Mon, 16 Feb 2015 23:59:57 +0000 (15:59 -0800)]
ocfs2: add orphan recovery types in ocfs2_recover_orphans

Define two orphan recovery types, which indicates if need truncate file or
not.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoocfs2: add functions to add and remove inode in orphan dir
Joseph Qi [Mon, 16 Feb 2015 23:59:54 +0000 (15:59 -0800)]
ocfs2: add functions to add and remove inode in orphan dir

Add functions to add inode to orphan dir and remove inode in orphan dir.
Here we do not call ocfs2_prepare_orphan_dir and ocfs2_orphan_add
directly.  Because append O_DIRECT will add inode to orphan two and may
result in more than one orphan entry for the same inode.

[akpm@linux-foundation.org: avoid dynamic stack allocation]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoocfs2: prepare some interfaces used in append direct io
Joseph Qi [Mon, 16 Feb 2015 23:59:50 +0000 (15:59 -0800)]
ocfs2: prepare some interfaces used in append direct io

Currently in case of append O_DIRECT write (block not allocated yet),
ocfs2 will fall back to buffered I/O.  This has some disadvantages.
Firstly, it is not the behavior as expected.  Secondly, it will consume
huge page cache, e.g.  in mass backup scenario.  Thirdly, modern
filesystems such as ext4 support this feature.

In this patch set, the direct I/O write doesn't fallback to buffer I/O
write any more because the allocate blocks are enabled in direct I/O now.

This patch (of 9):

Prepare some interfaces which will be used in append O_DIRECT write.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMAINTAINERS: fix spelling mistake & remove trailing WS
Akash Shende [Mon, 16 Feb 2015 23:59:48 +0000 (15:59 -0800)]
MAINTAINERS: fix spelling mistake & remove trailing WS

Signed-off-by: Akash Shende <akash0x53s@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax: does not work correctly with virtual aliasing caches
Matthew Wilcox [Mon, 16 Feb 2015 23:59:44 +0000 (15:59 -0800)]
dax: does not work correctly with virtual aliasing caches

The DAX code accesses the underlying storage through the kernel's linear
mapping, which may not be cache-coherent with user mappings on ARM, MIPS
or SPARC.  Temporarily disable the DAX code until this problem is
resolved.

The original XIP code also had this problem, but it was never noticed.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agobrd: rename XIP to DAX
Matthew Wilcox [Mon, 16 Feb 2015 23:59:41 +0000 (15:59 -0800)]
brd: rename XIP to DAX

Since this is relating to FS_XIP, not KERNEL_XIP, it should be called
DAX instead of XIP.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext4: add DAX functionality
Ross Zwisler [Mon, 16 Feb 2015 23:59:38 +0000 (15:59 -0800)]
ext4: add DAX functionality

This is a port of the DAX functionality found in the current version of
ext2.

[matthew.r.wilcox@intel.com: heavily tweaked]
[akpm@linux-foundation.org: remap_pages went away]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax: add dax_zero_page_range
Matthew Wilcox [Mon, 16 Feb 2015 23:59:35 +0000 (15:59 -0800)]
dax: add dax_zero_page_range

This new function allows us to support hole-punch for DAX files by zeroing
a partial page, as opposed to the dax_truncate_page() function which can
only truncate to the end of the page.  Reimplement dax_truncate_page() to
call dax_zero_page_range().

[ross.zwisler@linux.intel.com: ported to 3.13-rc2]
[akpm@linux-foundation.org: fix typos in comments]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext2: get rid of most mentions of XIP in ext2
Matthew Wilcox [Mon, 16 Feb 2015 23:59:31 +0000 (15:59 -0800)]
ext2: get rid of most mentions of XIP in ext2

To help people transition, accept the 'xip' mount option (and report it in
/proc/mounts), but print a message encouraging people to switch over to
the 'dax' option.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext2: remove ext2_aops_xip
Matthew Wilcox [Mon, 16 Feb 2015 23:59:28 +0000 (15:59 -0800)]
ext2: remove ext2_aops_xip

We shouldn't need a special address_space_operations any more

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agovfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX
Matthew Wilcox [Mon, 16 Feb 2015 23:59:25 +0000 (15:59 -0800)]
vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX

The fewer Kconfig options we have the better.  Use the generic
CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext2: remove xip.c and xip.h
Matthew Wilcox [Mon, 16 Feb 2015 23:59:22 +0000 (15:59 -0800)]
ext2: remove xip.c and xip.h

These files are now empty, so delete them

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext2: remove ext2_use_xip
Matthew Wilcox [Mon, 16 Feb 2015 23:59:18 +0000 (15:59 -0800)]
ext2: remove ext2_use_xip

Replace ext2_use_xip() with test_opt(XIP) which expands to the same code

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoext2: remove ext2_xip_verify_sb()
Matthew Wilcox [Mon, 16 Feb 2015 23:59:15 +0000 (15:59 -0800)]
ext2: remove ext2_xip_verify_sb()

Jan Kara pointed out that calling ext2_xip_verify_sb() in ext2_remount()
doesn't make sense, since changing the XIP option on remount isn't
allowed.  It also doesn't make sense to re-check whether blocksize is
supported since it can't change between mounts.

Replace the call to ext2_xip_verify_sb() in ext2_fill_super() with the
equivalent check and delete the definition.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agovfs: remove get_xip_mem
Matthew Wilcox [Mon, 16 Feb 2015 23:59:12 +0000 (15:59 -0800)]
vfs: remove get_xip_mem

All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax: replace XIP documentation with DAX documentation
Matthew Wilcox [Mon, 16 Feb 2015 23:59:09 +0000 (15:59 -0800)]
dax: replace XIP documentation with DAX documentation

Based on the original XIP documentation, this documents the current state
of affairs, and includes instructions on how users can enable DAX if their
devices and kernel support it.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax,ext2: replace xip_truncate_page with dax_truncate_page
Matthew Wilcox [Mon, 16 Feb 2015 23:59:06 +0000 (15:59 -0800)]
dax,ext2: replace xip_truncate_page with dax_truncate_page

It takes a get_block parameter just like nobh_truncate_page() and
block_truncate_page()

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax,ext2: replace the XIP page fault handler with the DAX page fault handler
Matthew Wilcox [Mon, 16 Feb 2015 23:59:02 +0000 (15:59 -0800)]
dax,ext2: replace the XIP page fault handler with the DAX page fault handler

Instead of calling aops->get_xip_mem from the fault handler, the
filesystem passes a get_block_t that is used to find the appropriate
blocks.

This requires that all architectures implement copy_user_page().  At the
time of writing, mips and arm do not.  Patches exist and are in progress.

[akpm@linux-foundation.org: remap_file_pages went away]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax,ext2: replace ext2_clear_xip_target with dax_clear_blocks
Matthew Wilcox [Mon, 16 Feb 2015 23:58:59 +0000 (15:58 -0800)]
dax,ext2: replace ext2_clear_xip_target with dax_clear_blocks

This is practically generic code; other filesystems will want to call it
from other places, but there's nothing ext2-specific about it.

Make it a little more generic by allowing it to take a count of the number
of bytes to zero rather than fixing it to a single page.  Thanks to Dave
Hansen for suggesting that I need to call cond_resched() if zeroing more
than one page.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodax,ext2: replace XIP read and write with DAX I/O
Matthew Wilcox [Mon, 16 Feb 2015 23:58:56 +0000 (15:58 -0800)]
dax,ext2: replace XIP read and write with DAX I/O

Use the generic AIO infrastructure instead of custom read and write
methods.  In addition to giving us support for AIO, this adds the missing
locking between read() and truncate().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agovfs,ext2: introduce IS_DAX(inode)
Matthew Wilcox [Mon, 16 Feb 2015 23:58:53 +0000 (15:58 -0800)]
vfs,ext2: introduce IS_DAX(inode)

Use an inode flag to tag inodes which should avoid using the page cache.
Convert ext2 to use it instead of mapping_is_xip().  Prevent I/Os to files
tagged with the DAX flag from falling back to buffered I/O.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: allow page fault handlers to perform the COW
Matthew Wilcox [Mon, 16 Feb 2015 23:58:50 +0000 (15:58 -0800)]
mm: allow page fault handlers to perform the COW

Currently COW of an XIP file is done by first bringing in a read-only
mapping, then retrying the fault and copying the page.  It is much more
efficient to tell the fault handler that a COW is being attempted (by
passing in the pre-allocated page in the vm_fault structure), and allow
the handler to perform the COW operation itself.

The handler cannot insert the page itself if there is already a read-only
mapping at that address, so allow the handler to return VM_FAULT_LOCKED
and set the fault_page to be NULL.  This indicates to the MM code that the
i_mmap_lock is held instead of the page lock.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: fix XIP fault vs truncate race
Matthew Wilcox [Mon, 16 Feb 2015 23:58:46 +0000 (15:58 -0800)]
mm: fix XIP fault vs truncate race

DAX is a replacement for the variation of XIP currently supported by the
ext2 filesystem.  We have three different things in the tree called 'XIP',
and the new focus is on access to data rather than executables, so a name
change was in order.  DAX stands for Direct Access.  The X is for
eXciting.

The new focus on data access has resulted in more careful attention to
races that exist in the current XIP code, but are not hit by the use-case
that it was designed for.  XIP's architecture worked fine for ext2, but
DAX is architected to work with modern filsystems such as ext4 and XFS.
DAX is not intended for use with btrfs; the value that btrfs adds relies
on manipulating data and writing data to different locations, while DAX's
value is for write-in-place and keeping the kernel from touching the data.

DAX was developed in order to support NV-DIMMs, but it's become clear that
its usefuless extends beyond NV-DIMMs and there are several potential
customers including the tracing machinery.  Other people want to place the
kernel log in an area of memory, as long as they have a BIOS that does not
clear DRAM on reboot.

Patch 1 is a bug fix, probably worth including in 3.18.

Patches 2 & 3 are infrastructure for DAX.

Patches 4-8 replace the XIP code with its DAX equivalents, transforming
ext2 to use the DAX code as we go.  Note that patch 10 is the
Documentation patch.

Patches 9-15 clean up after the XIP code, removing the infrastructure
that is no longer needed and renaming various XIP things to DAX.
Most of these patches were added after Jan found things he didn't
like in an earlier version of the ext4 patch ... that had been copied
from ext2.  So ext2 i being transformed to do things the same way that
ext4 will later.  The ability to mount ext2 filesystems with the 'xip'
option is retained, although the 'dax' option is now preferred.

Patch 16 adds some DAX infrastructure to support ext4.

Patch 17 adds DAX support to ext4.  It is broadly similar to ext2's DAX
support, but it is more efficient than ext4's due to its support for
unwritten extents.

Patch 18 is another cleanup patch renaming XIP to DAX.

My thanks to Mathieu Desnoyers for his reviews of the v11 patchset.  Most
of the changes below were based on his feedback.

This patch (of 18):

Pagecache faults recheck i_size after taking the page lock to ensure that
the fault didn't race against a truncate.  We don't have a page to lock in
the XIP case, so use i_mmap_lock_read() instead.  It is locked in the
truncate path in unmap_mapping_range() after updating i_size.  So while we
hold it in the fault path, we are guaranteed that either i_size has
already been updated in the truncate path, or that the truncate will
subsequently call zap_page_range_single() and so remove the mapping we
have just inserted.

There is a window of time in which i_size has been reduced and the thread
has a mapping to a page which will be removed from the file, but this is
harmless as the page will not be allocated to a different purpose before
the thread's access to it is revoked.

[akpm@linux-foundation.org: switch to i_mmap_lock_read(), add comment in unmap_single_vma()]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoarm: dts: zynq: update isl9305 compatible string to use isil vendor prefix
Arnaud Ebalard [Mon, 16 Feb 2015 23:58:43 +0000 (15:58 -0800)]
arm: dts: zynq: update isl9305 compatible string to use isil vendor prefix

"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).

Note: isl9305 is an I2C device so the patch does not in fact currently
depend on the introduction of "isil"-based compatible string in isl9305
driver (provided by another patch) because I2C core does not check the
prefix yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agostaging: iio: isl29028: deprecate use of isl in compatible string for isil
Arnaud Ebalard [Mon, 16 Feb 2015 23:58:39 +0000 (15:58 -0800)]
staging: iio: isl29028: deprecate use of isl in compatible string for isil

"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).  The old compatible string is kept for backward compatibility.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: isl12057: deprecate use of isl in compatible string for isil
Arnaud Ebalard [Mon, 16 Feb 2015 23:58:35 +0000 (15:58 -0800)]
rtc: isl12057: deprecate use of isl in compatible string for isil

"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).  The old compatible string is kept for backward compatibility.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: isl12022: deprecate use of isl in compatible string for isil
Arnaud Ebalard [Mon, 16 Feb 2015 23:58:31 +0000 (15:58 -0800)]
rtc: isl12022: deprecate use of isl in compatible string for isil

"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).  The old compatible string is kept for backward compatibility.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'cris-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper...
Linus Torvalds [Mon, 16 Feb 2015 02:02:02 +0000 (18:02 -0800)]
Merge tag 'cris-for-3.20' of git://git./linux/kernel/git/jesper/cris

Pull CRIS changes from Jesper Nilsson.

* tag 'cris-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  CRIS: Whitespace cleanup
  CRIS: macro whitespace fixes in uaccess.h
  CRIS: uaccess: fix sparse errors
  CRISv32: Remove unnecessary KERN_INFO from sync_serial
  CRIS: Fix missing NR_CPUS in menuconfig
  CRISv32: Avoid warning of unused variable
  CRIS: Avoid warning in cris mm/fault.c
  CRIS: Export csum_partial_copy_nocheck

9 years agoMerge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Sun, 15 Feb 2015 19:37:02 +0000 (11:37 -0800)]
Merge tag 'tty-3.20-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

9 years agoMerge tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sun, 15 Feb 2015 19:30:39 +0000 (11:30 -0800)]
Merge tag 'staging-3.20-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull staging drivers patches from Greg KH:
 "Here's the big staging driver tree update for 3.20-rc1.

  Lots of little things in here, adding up to lots of overall cleanups.
  The IIO driver updates are also in here as they cross the staging tree
  boundry a lot.  I2O has moved into staging as well, as a plan to drop
  it from the tree eventually as that's a dead subsystem.

  All of this has been in linux-next with no reported issues for a
  while"

* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
  staging: lustre: lustre: libcfs: define symbols as static
  staging: rtl8712: Do coding style cleanup
  staging: lustre: make obd_updatemax_lock static
  staging: rtl8188eu: core: switch with redundant cases
  staging: rtl8188eu: odm: conditional setting with no effect
  staging: rtl8188eu: odm: condition with no effect
  staging: ft1000: fix braces warning
  staging: sm7xxfb: fix remaining CamelCase
  staging: sm7xxfb: fix CamelCase
  staging: rtl8723au: multiple condition with no effect - if identical to else
  staging: sm7xxfb: make smtc_scr_info static
  staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
  staging/lustre/clio: Do not allow group locks with gid 0
  staging/lustre/llite: don't add to page cache upon failure
  staging/lustre/llite: Add exception entry check after radix_tree
  staging/lustre/libcfs: protect kkuc_groups from write access
  staging/lustre/fld: refer to MDT0 for fld lookup in some cases
  staging/lustre/llite: Solve a race to access lli_has_smd in read case
  staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
  staging/lustre/lnet: portal spreading rotor should be unsigned
  ...

9 years agoMerge tag 'driver-core-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 15 Feb 2015 19:11:47 +0000 (11:11 -0800)]
Merge tag 'driver-core-3.20-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Really tiny set of patches for this kernel.  Nothing major, all
  described in the shortlog and have been in linux-next for a while"

* tag 'driver-core-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: fix warning when creating a sysfs group without attributes
  firmware_loader: handle timeout via wait_for_completion_interruptible_timeout()
  firmware_loader: abort request if wait_for_completion is interrupted
  firmware: Correct function name in comment
  device: Change dev_<level> logging functions to return void
  device: Fix dev_dbg_once macro

9 years agoMerge tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
Linus Torvalds [Sun, 15 Feb 2015 18:48:44 +0000 (10:48 -0800)]
Merge tag 'char-misc-3.20-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull char / misc patches from Greg KH:
 "Here's the big char/misc driver update for 3.20-rc1.

  Lots of little things in here, all described in the changelog.
  Nothing major or unusual, except maybe the binder selinux stuff, which
  was all acked by the proper selinux people and they thought it best to
  come through this tree.

  All of this has been in linux-next with no reported issues for a while"

* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  coresight: fix function etm_writel_cp14() parameter order
  coresight-etm: remove check for unknown Kconfig macro
  coresight: fixing CPU hwid lookup in device tree
  coresight: remove the unnecessary function coresight_is_bit_set()
  coresight: fix the debug AMBA bus name
  coresight: remove the extra spaces
  coresight: fix the link between orphan connection and newly added device
  coresight: remove the unnecessary replicator property
  coresight: fix the replicator subtype value
  pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
  mcb: Fix error path of mcb_pci_probe
  virtio/console: verify device has config space
  ti-st: clean up data types (fix harmless memory corruption)
  mei: me: release hw from reset only during the reset flow
  mei: mask interrupt set bit on clean reset bit
  extcon: max77693: Constify struct regmap_config
  extcon: adc-jack: Release IIO channel on driver remove
  extcon: Remove duplicated include from extcon-class.c
  Drivers: hv: vmbus: hv_process_timer_expiration() can be static
  Drivers: hv: vmbus: serialize Offer and Rescind offer
  ...

9 years agoMerge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 15 Feb 2015 18:24:55 +0000 (10:24 -0800)]
Merge tag 'usb-3.20-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big pull request for the USB driver tree for 3.20-rc1.

  Nothing major happening here, just lots of gadget driver updates, new
  device ids, and a bunch of cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits)
  usb: musb: fix device hotplug behind hub
  usb: dwc2: Fix a bug in reading the endpoint directions from reg.
  staging: emxx_udc: fix the build error
  usb: Retry port status check on resume to work around RH bugs
  Revert "usb: Reset USB-3 devices on USB-3 link bounce"
  uhci-hub: use HUB_CHAR_*
  usb: kconfig: replace PPC_OF with PPC
  ehci-pci: disable for Intel MID platforms (update)
  usb: gadget: Kconfig: use bool instead of boolean
  usb: musb: blackfin: remove incorrect __exit_p()
  USB: fix use-after-free bug in usb_hcd_unlink_urb()
  ehci-pci: disable for Intel MID platforms
  usb: host: pci_quirks: joing string literals
  USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)
  USB: usbfs: allow URBs to be reaped after disconnection
  cdc-acm: kill unnecessary messages
  cdc-acm: add sanity checks
  usb: phy: phy-generic: Fix USB PHY gpio reset
  usb: dwc2: fix USB core dependencies
  usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()
  ...

9 years agoMerge branch 'for-linus-v3.20' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Sun, 15 Feb 2015 18:11:39 +0000 (10:11 -0800)]
Merge branch 'for-linus-v3.20' of git://git.infradead.org/linux-ubifs

Pull UBI and UBIFS updates from Richard Weinberger:
 - cleanups and bug fixes all over UBI and UBIFS
 - block-mq support for UBI Block
 - UBI volumes can now be renamed while they are in use
 - security.* XATTR support for UBIFS
 - a maintainer update

* 'for-linus-v3.20' of git://git.infradead.org/linux-ubifs:
  UBI: block: Fix checking for NULL instead of IS_ERR()
  UBI: block: Continue creating ubiblocks after an initialization error
  UBIFS: return -EINVAL if log head is empty
  UBI: Block: Explain usage of blk_rq_map_sg()
  UBI: fix soft lockup in ubi_check_volume()
  UBI: Fastmap: Care about the protection queue
  UBIFS: add a couple of extra asserts
  UBI: do propagate positive error codes up
  UBI: clean-up printing helpers
  UBI: extend UBI layer debug/messaging capabilities - cosmetics
  UBIFS: add ubifs_err() to print error reason
  UBIFS: Add security.* XATTR support for the UBIFS
  UBIFS: Add xattr support for symlinks
  UBI: Block: Add blk-mq support
  UBI: Add initial support for scatter gather
  UBI: rename_volumes: Use UBI_METAONLY
  UBI: Implement UBI_METAONLY
  Add myself as UBI co-maintainer

9 years agomutex: remove unused field "name" in debug mode
Adrien Schildknecht [Thu, 12 Feb 2015 13:01:37 +0000 (14:01 +0100)]
mutex: remove unused field "name" in debug mode

This field is unused and uninitialized since commit 9a11b49a8056
("[PATCH] lockdep: better lock debugging")

Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger...
Linus Torvalds [Sat, 14 Feb 2015 18:54:28 +0000 (10:54 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/borntraeger/linux

Pull ACCESS_ONCE() rule tightening from Christian Borntraeger:
 "Tighten rules for ACCESS_ONCE

  This series tightens the rules for ACCESS_ONCE to only work on scalar
  types.  It also contains the necessary fixups as indicated by build
  bots of linux-next.  Now everything is in place to prevent new
  non-scalar users of ACCESS_ONCE and we can continue to convert code to
  READ_ONCE/WRITE_ONCE"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
  kernel: Fix sparse warning for ACCESS_ONCE
  next: sh: Fix compile error
  kernel: tighten rules for ACCESS ONCE
  mm/gup: Replace ACCESS_ONCE with READ_ONCE
  x86/spinlock: Leftover conversion ACCESS_ONCE->READ_ONCE
  x86/xen/p2m: Replace ACCESS_ONCE with READ_ONCE
  ppc/hugetlbfs: Replace ACCESS_ONCE with READ_ONCE
  ppc/kvm: Replace ACCESS_ONCE with READ_ONCE

9 years agoCRIS: Whitespace cleanup
Jesper Nilsson [Mon, 9 Feb 2015 12:02:38 +0000 (13:02 +0100)]
CRIS: Whitespace cleanup

No functional change, just clean up the most obvious.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
9 years agoCRIS: macro whitespace fixes in uaccess.h
Michael S. Tsirkin [Tue, 27 Jan 2015 16:29:18 +0000 (17:29 +0100)]
CRIS: macro whitespace fixes in uaccess.h

While working on arch/cris/include/asm/uaccess.h, I noticed
that some macros within this header are made harder to read because they
violate a coding style rule: space is missing after comma.

Fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
9 years agoCRIS: uaccess: fix sparse errors
Michael S. Tsirkin [Tue, 27 Jan 2015 16:20:10 +0000 (17:20 +0100)]
CRIS: uaccess: fix sparse errors

virtio wants to read bitwise types from userspace using get_user.  At the
moment this triggers sparse errors, since the value is passed through an
integer.

Fix that up using __force.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
9 years agoCRISv32: Remove unnecessary KERN_INFO from sync_serial
Masanari Iida [Tue, 27 Jan 2015 14:16:31 +0000 (15:16 +0100)]
CRISv32: Remove unnecessary KERN_INFO from sync_serial

Remove unnecessary KERN_INFO in sync_serial.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 14 Feb 2015 17:47:01 +0000 (09:47 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.20:

   - Added 192/256-bit key support to aesni GCM.
   - Added MIPS OCTEON MD5 support.
   - Fixed hwrng starvation and race conditions.
   - Added note that memzero_explicit is not a subsitute for memset.
   - Added user-space interface for crypto_rng.
   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: tcrypt - do not allocate iv on stack for aead speed tests
  crypto: testmgr - limit IV copy length in aead tests
  crypto: tcrypt - fix buflen reminder calculation
  crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
  crypto: caam - fix resource clean-up on error path for caam_jr_init
  crypto: caam - pair irq map and dispose in the same function
  crypto: ccp - terminate ccp_support array with empty element
  crypto: caam - remove unused local variable
  crypto: caam - remove dead code
  crypto: caam - don't emit ICV check failures to dmesg
  hwrng: virtio - drop extra empty line
  crypto: replace scatterwalk_sg_next with sg_next
  crypto: atmel - Free memory in error path
  crypto: doc - remove colons in comments
  crypto: seqiv - Ensure that IV size is at least 8 bytes
  crypto: cts - Weed out non-CBC algorithms
  MAINTAINERS: add linux-crypto to hw random
  crypto: cts - Remove bogus use of seqiv
  crypto: qat - don't need qat_auth_state struct
  crypto: algif_rng - fix sparse non static symbol warning
  ...

9 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 14 Feb 2015 17:22:35 +0000 (09:22 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge fourth set of updates from Andrew Morton:

 - the rest of lib/

 - checkpatch updates

 - a few misc things

 - kasan: kernel address sanitizer

 - the rtc tree

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
  ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
  ARM: mvebu: add Device Tree description of RTC on Armada 38x
  MAINTAINERS: add the RTC driver for the Armada38x
  drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
  rtc: armada38x: add the device tree binding documentation
  rtc: rtc-ab-b5ze-s3: add sub-minute alarm support
  rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
  of: add vendor prefix for Abracon Corporation
  drivers/rtc/rtc-rk808.c: fix rtc time reading issue
  drivers/rtc/rtc-isl12057.c: constify struct regmap_config
  drivers/rtc/rtc-at91sam9.c: constify struct regmap_config
  drivers/rtc/rtc-imxdi.c: add more known register bits
  drivers/rtc/rtc-imxdi.c: trivial clean up code
  ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
  rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
  drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
  drivers/rtc/rtc-pcf2123.c: add support for devicetree
  kprobes: makes kprobes/enabled works correctly for optimized kprobes.
  kprobes: set kprobes_all_disarmed earlier to enable re-optimization.
  init: remove CONFIG_INIT_FALLBACK
  ...

9 years agoARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
Gregory CLEMENT [Fri, 13 Feb 2015 22:41:21 +0000 (14:41 -0800)]
ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig

Now that the Armada 38x RTC driver has been pushed, let's enable it in
mvebu_v7_defconfig.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoARM: mvebu: add Device Tree description of RTC on Armada 38x
Gregory CLEMENT [Fri, 13 Feb 2015 22:41:18 +0000 (14:41 -0800)]
ARM: mvebu: add Device Tree description of RTC on Armada 38x

The Marvell Armada 38x SoCs contains an RTC which differs from the RTC
used in the other mvebu SoCs until now.  This commit adds the Device Tree
description of this interface at the SoC level.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMAINTAINERS: add the RTC driver for the Armada38x
Gregory CLEMENT [Fri, 13 Feb 2015 22:41:14 +0000 (14:41 -0800)]
MAINTAINERS: add the RTC driver for the Armada38x

Put it in the mvebu entry.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
Gregory CLEMENT [Fri, 13 Feb 2015 22:41:11 +0000 (14:41 -0800)]
drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs

The new mvebu SoCs come with a new RTC driver. This patch adds the
support for this new IP which is currently found in the Armada 38x
SoCs.

This RTC provides two alarms, but only the first one is used in the
driver. The RTC also allows using periodic interrupts.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: armada38x: add the device tree binding documentation
Gregory CLEMENT [Fri, 13 Feb 2015 22:41:07 +0000 (14:41 -0800)]
rtc: armada38x: add the device tree binding documentation

The Marvell Armada 38x SoCs contains an RTC which differs from the RTC
used in the other mvebu SoCs until now.  This forth version of the patch
set adds support for this new IP and enable it in the Device Tree of the
Armada 38x SoC.

This patch (of 5):

The Armada 38x SoCs come with a new RTC which differs from the one used in
the other mvebu SoCs until now.  This patch describes the binding of this
RTC.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: rtc-ab-b5ze-s3: add sub-minute alarm support
Arnaud Ebalard [Fri, 13 Feb 2015 22:41:04 +0000 (14:41 -0800)]
rtc: rtc-ab-b5ze-s3: add sub-minute alarm support

Abracon AB-RTCMC-32.768kHz-B5ZE-S3 alarm is only accurate to the minute.
For that reason, UIE mode is currently not supported by the driver.  But
the device provides a watchdog timer which can be coupled with the alarm
mechanism to extend support and provide sub-minute alarm capability.

This patch implements that extension.  More precisely, it makes use of the
watchdog timer for alarms which are less that four minutes in the future
(with second accuracy) and use standard alarm mechanism for other alarms
(with minute accuracy).

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
Arnaud Ebalard [Fri, 13 Feb 2015 22:41:00 +0000 (14:41 -0800)]
rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip

This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3
RTC/Calendar module w/ I2C interface.

This support includes RTC time reading and setting, Alarm (1 minute
accuracy) reading and setting, and battery low detection.  The device also
supports frequency adjustment and two timers but those features are
currently not implemented in this driver.  Due to alarm accuracy
limitation (and current lack of timer support in the driver), UIE mode is
not supported.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoof: add vendor prefix for Abracon Corporation
Arnaud Ebalard [Fri, 13 Feb 2015 22:40:57 +0000 (14:40 -0800)]
of: add vendor prefix for Abracon Corporation

This series adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC
chip. Unlike many RTC chips, it includes an internal oscillator which
spares room on the PCB. It also has some interesting features, like
battery low detection (which the driver in this series supports). The
only small "limitation" (mainly due to what RTC subsystem expects from
RTC chips) is the fact that its alarm is accurate to the second. This
series provides a solution (described below) for that limitation using
another mechanism of the chip.

I decided to split support between three different patches for
this v0:

- Patch 1/3: it simply references Abracon Corporation in vendor-prefixes
  documentation file. As Abracon has no NASDAQ ticker symbol; I have
  decided to use "abcn" (I initially started my work w/ "ab" but later
  changed for "abcn" which looked more meaningful)
- Patch 2/3: it adds initial support for the chip and provides the
  ability to read/write time and also read/write alarm. As the alarm
  the chip provides is accurate to the minute, the support provided
  by this patch also has this limitation (e.g. UIE mode is not
  supported).
- Patch 3/3: the chip supports a watchdog timer which can be used to
  extend the alarm mechanism in patch 2/3 in order to provide support
  for alarms under one minute (e.g. support UIE mode). In practice,
  the logic I implemented is to use the watchdog timer for alarms which
  are at most 4 minutes in the future and use the common alarm mechanism
  for alarms which are set to larger values. With that additional patch
  the device fully passes the rtctest.c program.

I decided to split the driver between two patches (2 and 3 of 3) in
order to ease review: patch 2 should be pretty straightforward to read
for someone familiar w/ RTC subsystem. Patch 3 only extends what is in
patch 2 regarding alarms.

This patch (of 3):

Documentation/devicetree/bindings/vendor-prefixes.txt: add vendor prefix
for Abracon Corporation

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-rk808.c: fix rtc time reading issue
Chris Zhong [Fri, 13 Feb 2015 22:40:54 +0000 (14:40 -0800)]
drivers/rtc/rtc-rk808.c: fix rtc time reading issue

After we set the GET_TIME bit, the rtc time can't be read immediately.  We
should wait up to 31.25 us, about one cycle of 32khz.  Otherwise reading
RTC time will return a old time.  If we clear the GET_TIME bit after
setting, the time of i2c transfer is certainly more than 31.25us.

Doug said:

: I think we are safe.  At 400kHz (the max speed of this part) each bit can
: be transferred no faster than 2.5us.  In order to do a valid i2c
: transaction we need to _at least_ write the address of the device and the
: data onto the bus, which is 16 bits.  16 * 2.5us = 40us.  That's above the
: 31.25us

[akpm@linux-foundation.org: tweak comment per review discussion]
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Heiko Stübner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-isl12057.c: constify struct regmap_config
Krzysztof Kozlowski [Fri, 13 Feb 2015 22:40:51 +0000 (14:40 -0800)]
drivers/rtc/rtc-isl12057.c: constify struct regmap_config

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-at91sam9.c: constify struct regmap_config
Krzysztof Kozlowski [Fri, 13 Feb 2015 22:40:48 +0000 (14:40 -0800)]
drivers/rtc/rtc-at91sam9.c: constify struct regmap_config

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-imxdi.c: add more known register bits
Juergen Borleis [Fri, 13 Feb 2015 22:40:45 +0000 (14:40 -0800)]
drivers/rtc/rtc-imxdi.c: add more known register bits

Intended for monitoring and controlling the security features.  These bits
are required to bring this unit back to live after a security violation
event was detected.  The code to bring it back to live will follow after a
vendor clearance.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-imxdi.c: trivial clean up code
Juergen Borleis [Fri, 13 Feb 2015 22:40:42 +0000 (14:40 -0800)]
drivers/rtc/rtc-imxdi.c: trivial clean up code

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
Arnaud Ebalard [Fri, 13 Feb 2015 22:40:39 +0000 (14:40 -0800)]
ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120

Now that alarm support for ISL12057 chip is available w/ the specific
"isil,irq2-can-wakeup-machine" property, let's use that feature of the
driver dedicated to NETGEAR ReadyNAS 102, 104 and 2120 specific routing of
RTC Alarm IRQ#2 pin; on those devices, this pin is not connected to the
SoC but to a PMIC, which allows the device to be powered up when RTC alarm
rings.

For that to work, the chip needs to be explicitly marked as a device
wakeup source using this "isil,irq2-can-wakeup-machine" boolean property.
This makes 'wakealarm' sysfs entry available to configure the alarm.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agortc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
Arnaud Ebalard [Fri, 13 Feb 2015 22:40:35 +0000 (14:40 -0800)]
rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users

Current in-tree users of ISL12057 RTC chip (NETGEAR ReadyNAS 102, 104 and
2120) do not have the IRQ#2 pin of the chip (associated w/ the Alarm1
mechanism) connected to their SoC, but to a PMIC (TPS65251 FWIW).  This
specific hardware configuration allows the NAS to wake up when the alarms
rings.

Recently introduced alarm support for ISL12057 relies on the provision of
an "interrupts" property in system .dts file, which previous three users
will never get.  For that reason, alarm support on those devices is not
function.  To support this use case, this patch adds a new DT property for
ISL12057 (isil,irq2-can-wakeup-machine) to indicate that the chip is
capable of waking up the device using its IRQ#2 pin (even though it does
not have its IRQ#2 pin connected directly to the SoC).

This specific configuration was tested on a ReadyNAS 102 by setting an
alarm, powering off the device and see it reboot as expected when the
alarm rang w/:

  # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm
  # shutdown -h now

As a side note, the ISL12057 remains in the list of trivial devices,
because the property is not per se required by the device to work but can
help handle system w/ specific requirements.  In exchange, the new feature
is described in details in a specific documentation file.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
Arnaud Ebalard [Fri, 13 Feb 2015 22:40:32 +0000 (14:40 -0800)]
drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver

This patch adds alarm support to Intersil ISL12057 driver.  This allows to
configure the chip to generate an interrupt when the alarm matches current
time value.  Alarm can be programmed up to one month in the future and is
accurate to the second.

The patch was developed to support two different configurations: systems
w/ and w/o RTC chip IRQ line connected to the main CPU.

The latter is the one found on current 3 kernel users of the chip for
which support was initially developed (Netgear ReadyNAS 102, 104 and 2120
NAS).  On those devices, the IRQ#2 pin of the chip is not connected to the
SoC but to a PMIC.  This allows setting an alarm, powering off the device
and have it wake up when the alarm rings.  To support that configuration
the driver does the following:

 1. it has alarm_irq_enable() function returns -ENOTTY when no IRQ
    is passed to the driver.
 2. it marks the device as a wakeup source in all cases (whether an
    IRQ is passed to the driver or not) to have 'wakealarm' sysfs
    entry created.
 3. it marks the device has not supporting UIE mode when no IRQ is
    passed to the driver (see the commmit message of c9f5c7e7a84f)

This specific configuration was tested on a ReadyNAS 102 by setting an
alarm, powering off the device and see it reboot as expected when the
alarm rang.

The former configuration was tested on a Netgear ReadyNAS 102 after some
soldering of the IRQ#2 pin of the RTC chip to a MPP line of the SoC (the
one used usually handles the reset button).  The test was performed using
a modified .dts file reflecting this change (see below) and rtc-test.c
program available in Documentation/rtc.txt.  This test program ran as
expected, which validates alarm supports, including interrupt support.

As a side note, the ISL12057 remains in the list of trivial devices, i.e.
no specific DT binding being added by this patch: i2c core automatically
handles extraction of IRQ line info from .dts file.  For instance, if one
wants to reference the interrupt line for the alarm in its .dts file,
adding interrupt and interrupt-parent properties works as expected:

          isl12057: isl12057@68 {
                  compatible =3D "isil,isl12057";
                  interrupt-parent =3D <&gpio0>;
                  interrupts =3D <6 IRQ_TYPE_EDGE_FALLING>;
                  reg =3D <0x68>;
          };

FWIW, if someone is looking for a way to test alarm support on a system on
which the chip IRQ line has the ability to boot the system (e.g.  ReadyNAS
102, 104, etc):

    # echo 0 > /sys/class/rtc/rtc0/wakealarm
    # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm
    # shutdown -h now

With the commands above, after a minute, the system comes back to life.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agodrivers/rtc/rtc-pcf2123.c: add support for devicetree
Joshua Clayton [Fri, 13 Feb 2015 22:40:29 +0000 (14:40 -0800)]
drivers/rtc/rtc-pcf2123.c: add support for devicetree

Add compatible string "nxp,rtc-pcf2123"
Document the binding

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokprobes: makes kprobes/enabled works correctly for optimized kprobes.
Wang Nan [Fri, 13 Feb 2015 22:40:26 +0000 (14:40 -0800)]
kprobes: makes kprobes/enabled works correctly for optimized kprobes.

debugfs/kprobes/enabled doesn't work correctly on optimized kprobes.
Masami Hiramatsu has a test report on x86_64 platform:

https://lkml.org/lkml/2015/1/19/274

This patch forces it to unoptimize kprobe if kprobes_all_disarmed is set.
It also checks the flag in unregistering path for skipping unneeded
disarming process when kprobes globally disarmed.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokprobes: set kprobes_all_disarmed earlier to enable re-optimization.
Wang Nan [Fri, 13 Feb 2015 22:40:24 +0000 (14:40 -0800)]
kprobes: set kprobes_all_disarmed earlier to enable re-optimization.

In original code, the probed instruction doesn't get optimized after

echo 0 > /sys/kernel/debug/kprobes/enabled
echo 1 > /sys/kernel/debug/kprobes/enabled

This is because original code checks kprobes_all_disarmed in
optimize_kprobe(), but this flag is turned off after calling that
function.  Therefore, optimize_kprobe() will see kprobes_all_disarmed ==
true and doesn't do the optimization.

This patch simply turns off kprobes_all_disarmed earlier to enable
optimization.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoinit: remove CONFIG_INIT_FALLBACK
Andy Lutomirski [Fri, 13 Feb 2015 22:40:21 +0000 (14:40 -0800)]
init: remove CONFIG_INIT_FALLBACK

CONFIG_INIT_FALLBACK adds config bloat without an obvious use case that
makes it worth keeping around.  Delete it.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Landley <rob@landley.net>
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokasan: enable instrumentation of global variables
Andrey Ryabinin [Fri, 13 Feb 2015 22:40:17 +0000 (14:40 -0800)]
kasan: enable instrumentation of global variables

This feature let us to detect accesses out of bounds of global variables.
This will work as for globals in kernel image, so for globals in modules.
Currently this won't work for symbols in user-specified sections (e.g.
__init, __read_mostly, ...)

The idea of this is simple.  Compiler increases each global variable by
redzone size and add constructors invoking __asan_register_globals()
function.  Information about global variable (address, size, size with
redzone ...) passed to __asan_register_globals() so we could poison
variable's redzone.

This patch also forces module_alloc() to return 8*PAGE_SIZE aligned
address making shadow memory handling (
kasan_module_alloc()/kasan_module_free() ) more simple.  Such alignment
guarantees that each shadow page backing modules address space correspond
to only one module_alloc() allocation.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomodule: fix types of device tables aliases
Andrey Ryabinin [Fri, 13 Feb 2015 22:40:13 +0000 (14:40 -0800)]
module: fix types of device tables aliases

MODULE_DEVICE_TABLE() macro used to create aliases to device tables.
Normally alias should have the same type as aliased symbol.

Device tables are arrays, so they have 'struct type##_device_id[x]'
types. Alias created by MODULE_DEVICE_TABLE() will have non-array type -
'struct type##_device_id'.

This inconsistency confuses compiler, it could make a wrong assumption
about variable's size which leads KASan to produce a false positive report
about out of bounds access.

For every global variable compiler calls __asan_register_globals() passing
information about global variable (address, size, size with redzone, name
...) __asan_register_globals() poison symbols redzone to detect possible
out of bounds accesses.

When symbol has an alias __asan_register_globals() will be called as for
symbol so for alias.  Compiler determines size of variable by size of
variable's type.  Alias and symbol have the same address, so if alias have
the wrong size part of memory that actually belongs to the symbol could be
poisoned as redzone of alias symbol.

By fixing type of alias symbol we will fix size of it, so
__asan_register_globals() will not poison valid memory.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokernel: add support for .init_array.* constructors
Andrey Ryabinin [Fri, 13 Feb 2015 22:40:10 +0000 (14:40 -0800)]
kernel: add support for .init_array.* constructors

KASan uses constructors for initializing redzones for global variables.
Globals instrumentation in GCC 4.9.2 produces constructors with priority
(.init_array.00099)

Currently kernel ignores such constructors.  Only constructors with
default priority supported (.init_array)

This patch adds support for constructors with priorities.  For kernel
image we put pointers to constructors between __ctors_start/__ctors_end
and do_ctors() will call them on start up.  For modules we merge
.init_array.* sections into resulting .init_array.  Module code properly
handles constructors in .init_array section.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: vmalloc: pass additional vm_flags to __vmalloc_node_range()
Andrey Ryabinin [Fri, 13 Feb 2015 22:40:07 +0000 (14:40 -0800)]
mm: vmalloc: pass additional vm_flags to __vmalloc_node_range()

For instrumenting global variables KASan will shadow memory backing memory
for modules.  So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().

__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area.  Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole.  So we could fail to allocate shadow
for module_alloc().

Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into
__vmalloc_node_range().  Add new parameter 'vm_flags' to
__vmalloc_node_range() function.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: vmalloc: add flag preventing guard hole allocation
Andrey Ryabinin [Fri, 13 Feb 2015 22:40:03 +0000 (14:40 -0800)]
mm: vmalloc: add flag preventing guard hole allocation

For instrumenting global variables KASan will shadow memory backing memory
for modules.  So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().

__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area.  Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole.  So we could fail to allocate shadow
for module_alloc().

Add a new vm_struct flag 'VM_NO_GUARD' indicating that vm area doesn't
have a guard hole.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokasan: enable stack instrumentation
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:59 +0000 (14:39 -0800)]
kasan: enable stack instrumentation

Stack instrumentation allows to detect out of bounds memory accesses for
variables allocated on stack.  Compiler adds redzones around every
variable on stack and poisons redzones in function's prologue.

Such approach significantly increases stack usage, so all in-kernel stacks
size were doubled.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agox86_64: kasan: add interceptors for memset/memmove/memcpy functions
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:56 +0000 (14:39 -0800)]
x86_64: kasan: add interceptors for memset/memmove/memcpy functions

Recently instrumentation of builtin functions calls was removed from GCC
5.0.  To check the memory accessed by such functions, userspace asan
always uses interceptors for them.

So now we should do this as well.  This patch declares
memset/memmove/memcpy as weak symbols.  In mm/kasan/kasan.c we have our
own implementation of those functions which checks memory before accessing
it.

Default memset/memmove/memcpy now now always have aliases with '__'
prefix.  For files that built without kasan instrumentation (e.g.
mm/slub.c) original mem* replaced (via #define) with prefixed variants,
cause we don't want to check memory accesses there.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agolib: add kasan test module
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:53 +0000 (14:39 -0800)]
lib: add kasan test module

This is a test module doing various nasty things like out of bounds
accesses, use after free.  It is useful for testing kernel debugging
features like kernel address sanitizer.

It mostly concentrates on testing of slab allocator, but we might want to
add more different stuff here in future (like stack/global variables out
of bounds accesses and so on).

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokmemleak: disable kasan instrumentation for kmemleak
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:49 +0000 (14:39 -0800)]
kmemleak: disable kasan instrumentation for kmemleak

kmalloc internally round up allocation size, and kmemleak uses rounded up
size as object's size.  This makes kasan to complain while kmemleak scans
memory or calculates of object's checksum.  The simplest solution here is
to disable kasan.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agofs: dcache: manually unpoison dname after allocation to shut up kasan's reports
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:45 +0000 (14:39 -0800)]
fs: dcache: manually unpoison dname after allocation to shut up kasan's reports

We need to manually unpoison rounded up allocation size for dname to avoid
kasan's reports in dentry_string_cmp().  When CONFIG_DCACHE_WORD_ACCESS=y
dentry_string_cmp may access few bytes beyound requested in kmalloc()
size.

dentry_string_cmp() relates on that fact that dentry allocated using
kmalloc and kmalloc internally round up allocation size.  So this is not a
bug, but this makes kasan to complain about such accesses.  To avoid such
reports we mark rounded up allocation size in shadow as accessible.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: slub: add kernel address sanitizer support for slub allocator
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:42 +0000 (14:39 -0800)]
mm: slub: add kernel address sanitizer support for slub allocator

With this patch kasan will be able to catch bugs in memory allocated by
slub.  Initially all objects in newly allocated slab page, marked as
redzone.  Later, when allocation of slub object happens, requested by
caller number of bytes marked as accessible, and the rest of the object
(including slub's metadata) marked as redzone (inaccessible).

We also mark object as accessible if ksize was called for this object.
There is some places in kernel where ksize function is called to inquire
size of really allocated area.  Such callers could validly access whole
allocated memory, so it should be marked as accessible.

Code in slub.c and slab_common.c files could validly access to object's
metadata, so instrumentation for this files are disabled.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Dmitry Chernenkov <dmitryc@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: slub: introduce metadata_access_enable()/metadata_access_disable()
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:38 +0000 (14:39 -0800)]
mm: slub: introduce metadata_access_enable()/metadata_access_disable()

It's ok for slub to access memory that marked by kasan as inaccessible
(object's metadata).  Kasan shouldn't print report in that case because
these accesses are valid.  Disabling instrumentation of slub.c code is not
enough to achieve this because slub passes pointer to object's metadata
into external functions like memchr_inv().

We don't want to disable instrumentation for memchr_inv() because this is
quite generic function, and we don't want to miss bugs.

metadata_access_enable/metadata_access_disable used to tell KASan where
accesses to metadata starts/end, so we could temporarily disable KASan
reports.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: slub: share object_err function
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:35 +0000 (14:39 -0800)]
mm: slub: share object_err function

Remove static and add function declarations to linux/slub_def.h so it
could be used by kernel address sanitizer.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: slub: introduce virt_to_obj function
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:31 +0000 (14:39 -0800)]
mm: slub: introduce virt_to_obj function

virt_to_obj takes kmem_cache address, address of slab page, address x
pointing somewhere inside slab object, and returns address of the
beginning of object.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomm: page_alloc: add kasan hooks on alloc and free paths
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:28 +0000 (14:39 -0800)]
mm: page_alloc: add kasan hooks on alloc and free paths

Add kernel address sanitizer hooks to mark allocated page's addresses as
accessible in corresponding shadow region.  Mark freed pages as
inaccessible.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agox86_64: add KASan support
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:25 +0000 (14:39 -0800)]
x86_64: add KASan support

This patch adds arch specific code for kernel address sanitizer.

16TB of virtual addressed used for shadow memory.  It's located in range
[ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup
stacks.

At early stage we map whole shadow region with zero page.  Latter, after
pages mapped to direct mapping address range we unmap zero pages from
corresponding shadow (see kasan_map_shadow()) and allocate and map a real
shadow memory reusing vmemmap_populate() function.

Also replace __pa with __pa_nodebug before shadow initialized.  __pa with
CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr)
__phys_addr is instrumented, so __asan_load could be called before shadow
area initialized.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokasan: disable memory hotplug
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:21 +0000 (14:39 -0800)]
kasan: disable memory hotplug

Currently memory hotplug won't work with KASan.  As we don't have shadow
for hotplugged memory, kernel will crash on the first access to it.  To
make this work we will need to allocate shadow for new memory.

At some future point proper memory hotplug support will be implemented.
Until then, print a warning at startup and disable memory hot-add.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agokasan: add kernel address sanitizer infrastructure
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:17 +0000 (14:39 -0800)]
kasan: add kernel address sanitizer infrastructure

Kernel Address sanitizer (KASan) is a dynamic memory error detector.  It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.

KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required.  v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.

This patch only adds infrastructure for kernel address sanitizer.  It's
not available for use yet.  The idea and some code was borrowed from [1].

Basic idea:

The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.

Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.

Here is function to translate address to corresponding shadow address:

     unsigned long kasan_mem_to_shadow(unsigned long addr)
     {
                return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
     }

where KASAN_SHADOW_SCALE_SHIFT = 3.

So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible.  Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).

To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.

These functions check whether memory region is valid to access or not by
checking corresponding shadow memory.  If access is not valid an error
printed.

Historical background of the address sanitizer from Dmitry Vyukov:

"We've developed the set of tools, AddressSanitizer (Asan),
ThreadSanitizer and MemorySanitizer, for user space. We actively use
them for testing inside of Google (continuous testing, fuzzing,
running prod services). To date the tools have found more than 10'000
scary bugs in Chromium, Google internal codebase and various
open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
lots of others): [2] [3] [4].
The tools are part of both gcc and clang compilers.

We have not yet done massive testing under the Kernel AddressSanitizer
(it's kind of chicken and egg problem, you need it to be upstream to
start applying it extensively). To date it has found about 50 bugs.
Bugs that we've found in upstream kernel are listed in [5].
We've also found ~20 bugs in out internal version of the kernel. Also
people from Samsung and Oracle have found some.

[...]

As others noted, the main feature of AddressSanitizer is its
performance due to inline compiler instrumentation and simple linear
shadow memory. User-space Asan has ~2x slowdown on computational
programs and ~2x memory consumption increase. Taking into account that
kernel usually consumes only small fraction of CPU and memory when
running real user-space programs, I would expect that kernel Asan will
have ~10-30% slowdown and similar memory consumption increase (when we
finish all tuning).

I agree that Asan can well replace kmemcheck. We have plans to start
working on Kernel MemorySanitizer that finds uses of unitialized
memory. Asan+Msan will provide feature-parity with kmemcheck. As
others noted, Asan will unlikely replace debug slab and pagealloc that
can be enabled at runtime. Asan uses compiler instrumentation, so even
if it is disabled, it still incurs visible overheads.

Asan technology is easily portable to other architectures. Compiler
instrumentation is fully portable. Runtime has some arch-dependent
parts like shadow mapping and atomic operation interception. They are
relatively easy to port."

Comparison with other debugging features:
========================================

KMEMCHECK:

  - KASan can do almost everything that kmemcheck can.  KASan uses
    compile-time instrumentation, which makes it significantly faster than
    kmemcheck.  The only advantage of kmemcheck over KASan is detection of
    uninitialized memory reads.

    Some brief performance testing showed that kasan could be
    x500-x600 times faster than kmemcheck:

$ netperf -l 30
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

no debug: 87380  16384  16384    30.00    41624.72

kasan inline: 87380  16384  16384    30.00    12870.54

kasan outline: 87380  16384  16384    30.00    10586.39

kmemcheck:  87380  16384  16384    30.03      20.23

  - Also kmemcheck couldn't work on several CPUs.  It always sets
    number of CPUs to 1.  KASan doesn't have such limitation.

DEBUG_PAGEALLOC:
- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
  granularity level, so it able to find more bugs.

SLUB_DEBUG (poisoning, redzones):
- SLUB_DEBUG has lower overhead than KASan.

- SLUB_DEBUG in most cases are not able to detect bad reads,
  KASan able to detect both reads and writes.

- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
  bugs only on allocation/freeing of object. KASan catch
  bugs right before it will happen, so we always know exact
  place of first bad read/write.

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies

Based on work by Andrey Konovalov.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocompiler: introduce __alias(symbol) shortcut
Andrey Ryabinin [Fri, 13 Feb 2015 22:39:14 +0000 (14:39 -0800)]
compiler: introduce __alias(symbol) shortcut

To be consistent with other compiler attributes introduce __alias(symbol)
macro expanding into __attribute__((alias(#symbol)))

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoMODULE_DEVICE_TABLE: fix some callsites
Andrew Morton [Fri, 13 Feb 2015 22:39:11 +0000 (14:39 -0800)]
MODULE_DEVICE_TABLE: fix some callsites

The patch "module: fix types of device tables aliases" newly requires that
invocations of

MODULE_DEVICE_TABLE(type, name);

come *after* the definition of `name'.  That is reasonable, but some
drivers weren't doing this.  Fix them.

Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: David Miller <davem@davemloft.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoepoll: optimize setting task running after blocking
Davidlohr Bueso [Fri, 13 Feb 2015 22:39:08 +0000 (14:39 -0800)]
epoll: optimize setting task running after blocking

After waking up a task waiting for an event, we explicitly mark it as
TASK_RUNNING (which is necessary as we do the checks for wakeups as
TASK_INTERRUPTIBLE).  Once running and dealing with actually delivering
the events, we're obviously not planning on calling schedule, thus we can
relax the implied barrier and simply update the state with
__set_current_state().

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add of_device_id to structs that should be const
Joe Perches [Fri, 13 Feb 2015 22:39:05 +0000 (14:39 -0800)]
checkpatch: add of_device_id to structs that should be const

Uses of struct of_device_id are most commonly const.

Suggest using it as such.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: try to avoid poor patch subject lines
Joe Perches [Fri, 13 Feb 2015 22:39:02 +0000 (14:39 -0800)]
checkpatch: try to avoid poor patch subject lines

Naming the tool that found an issue in the subject line isn't very useful.
 Emit a warning when a common tool (currently checkpatch, sparse or
smatch) is in the subject line.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: make sure a commit reference description uses parentheses
Joe Perches [Fri, 13 Feb 2015 22:39:00 +0000 (14:39 -0800)]
checkpatch: make sure a commit reference description uses parentheses

The preferred style for a commit reference in a commit log is:

    commit <foo> ("<title line>")

A recent commit removed this check for parentheses.  Add it back.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add --strict test for spaces around arithmetic
Joe Perches [Fri, 13 Feb 2015 22:38:57 +0000 (14:38 -0800)]
checkpatch: add --strict test for spaces around arithmetic

Some prefer code to have spaces around arithmetic so instead of:
        a = b*c+d;
suggest
        a = b * c + d;

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: neaten printk_ratelimited message position
Joe Perches [Fri, 13 Feb 2015 22:38:54 +0000 (14:38 -0800)]
checkpatch: neaten printk_ratelimited message position

Just neatening...

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: improve "no space necessary after cast" test
Joe Perches [Fri, 13 Feb 2015 22:38:52 +0000 (14:38 -0800)]
checkpatch: improve "no space necessary after cast" test

Code like:
if (a < sizeof(<type>) &&
and
{ .len = sizeof(<type>) },

incorrectly emits that warning, so add more exceptions to avoid
the warning.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: improve seq_print->seq_puts suggestion
Heba Aamer [Fri, 13 Feb 2015 22:38:49 +0000 (14:38 -0800)]
checkpatch: improve seq_print->seq_puts suggestion

Improve the format specifier test by removing any %% before looking for
any remaining % format specifier.

Signed-off-by: Heba Aamer <heba93aamer@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add ability to --fix unnecessary blank lines around braces
Joe Perches [Fri, 13 Feb 2015 22:38:46 +0000 (14:38 -0800)]
checkpatch: add ability to --fix unnecessary blank lines around braces

There's a --strict test for these blank lines.

Add the ability to automatically remove them with --fix.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add types for other OS typedefs
Joe Perches [Fri, 13 Feb 2015 22:38:43 +0000 (14:38 -0800)]
checkpatch: add types for other OS typedefs

bsd and sysv use different typedefs for unsigned types.

These are in types.h but not in checkpatch, so add them to checkpatch's
ability to know types.

This can avoid false positives for code like:

void foo(void)
{
int x;
uint y;

[...];
}

where checkpatch incorrectly emits a warning for "missing a blank line
after declarations".

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add ability to coalesce commit descriptions on multiple lines
Joe Perches [Fri, 13 Feb 2015 22:38:41 +0000 (14:38 -0800)]
checkpatch: add ability to coalesce commit descriptions on multiple lines

If a git commit description is split on consecutive lines, coalesce it
before testing.

This allows:

  commit <foo> ("some long
  description")

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add likely/unlikely comparison misuse test
Joe Perches [Fri, 13 Feb 2015 22:38:38 +0000 (14:38 -0800)]
checkpatch: add likely/unlikely comparison misuse test

Add a test for probably likely/unlikely misuses where the comparison is
likely misplaced

if (likely(foo) > 0)
vs
if (likely(foo > 0))

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Jaeger <cj@linux.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: update git commit message
Joe Perches [Fri, 13 Feb 2015 22:38:35 +0000 (14:38 -0800)]
checkpatch: update git commit message

The git commit message can be confusing,

Try to clarify the message a bit to reduce the confusion when emitted.

Show the correct form using
Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")'
and if the git commit sha1 is unique, show
the right sha1 to use with the actual title

Signed-off-by: Joe Perches <joe@perches.com>
Original-patch-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Chris Rorvick <chris@rorvick.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: Allow comments in macros tested for single statements
Joe Perches [Fri, 13 Feb 2015 22:38:32 +0000 (14:38 -0800)]
checkpatch: Allow comments in macros tested for single statements

Convert all the comments to spaces before testing for single statement
macros.

Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: add check for keyword 'boolean' in Kconfig definitions
Christoph Jaeger [Fri, 13 Feb 2015 22:38:29 +0000 (14:38 -0800)]
checkpatch: add check for keyword 'boolean' in Kconfig definitions

Discourage the use of keyword 'boolean' for type definition attributes of
config options as support for it will be dropped later on.

See http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com

Signed-off-by: Christoph Jaeger <cj@linux.com>
Suggested-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: fix UNNECESSARY_KERN_LEVEL false positive
Paolo Bonzini [Fri, 13 Feb 2015 22:38:26 +0000 (14:38 -0800)]
checkpatch: fix UNNECESSARY_KERN_LEVEL false positive

KERN_<LEVEL> is never redundant with printk_ratelimited or printk_once.
(Except perhaps in the sense that you could use e.g.  pr_err_ratelimited
or pr_err_once, but that would apply to printk as well).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agocheckpatch: ignore __pure $Attribute
Joe Perches [Fri, 13 Feb 2015 22:38:24 +0000 (14:38 -0800)]
checkpatch: ignore __pure $Attribute

Just like "__cold", ignore the __pure gcc attribute macro so pointer
warnings aren't generated for uses like "int * __pure fn(...)"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>