net-caif: avoid user-triggerable WARN_ON(1)

commit 550ac9c1aaaaf51fd42e20d461f0b1cdbd55b3d2 upstream.

syszbot triggers this warning, which looks something
we can easily prevent.

If we initialize priv->list_field in chnl_net_init(),
then always use list_del_init(), we can remove robust_list_del()
completely.

WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline]
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Modules linked in:
CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline]
RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c
RSP: 0018:ffffc90009067248 EFLAGS: 00010202
RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000
RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003
RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647
R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08
R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480
FS:  00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 register_netdevice+0xadf/0x1500 net/core/dev.c:10347
 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468
 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 __sys_sendto+0x21c/0x320 net/socket.c:2036
 __do_sys_sendto net/socket.c:2048 [inline]
 __se_sys_sendto net/socket.c:2044 [inline]
 __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: cc36a070b590 ("net-caif: add CAIF netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix enabling network interfaces without VFs

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream.

This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.

Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: reset legacy rtc flag for PV domU

commit f68aa100d815b5b4467fd1c3abbe3b99d65fd028 upstream.

A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:

[    1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[    1.333404] Modules linked in:
[    1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.14.0-rc7-default+ #282
[    1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[    1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[    1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002
[    1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000
[    1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d
[    1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000
[    1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200
[    1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4
[    1.333404] FS:  0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000
[    1.333404] CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660
[    1.333404] Call Trace:
[    1.333404]  ? wakeup_sources_sysfs_init+0x30/0x30
[    1.333404]  ? rdinit_setup+0x2b/0x2b
[    1.333404]  early_resume_init+0x23/0xa4
[    1.333404]  ? cn_proc_init+0x36/0x36
[    1.333404]  do_one_initcall+0x3e/0x200
[    1.333404]  kernel_init_freeable+0x232/0x28e
[    1.333404]  ? rest_init+0xd0/0xd0
[    1.333404]  kernel_init+0x16/0x120
[    1.333404]  ret_from_fork+0x1f/0x30

Cc: <stable@vger.kernel.org>
Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_proto: Send command again when timeout occurs

commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.

Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: enable accounting for pids in nested pid namespaces

commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream.

Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces.  As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.

Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.

Though recently I've noticed that it is wrong.  nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces.  The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.

Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.

Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com
Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: initialize hugetlb_usage in mm_init

commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream.

After fork, the child process will get incorrect (2x) hugetlb_usage.  If
a process uses 5 2MB hugetlb pages in an anonymous mapping,

HugetlbPages:    10240 kB

and then forks, the child will show,

HugetlbPages:    20480 kB

The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child.  Child will have 2x actual usage.

Fix this by adding hugetlb_count_init in mm_init.

Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: BusLogic: Fix missing pr_cont() use

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix crash with signals and alloca

commit 030f653078316a9cc9ca6bd1b0234dcf858be35d upstream.

I was debugging some crashes on parisc and I found out that there is a
crash possibility if a function using alloca is interrupted by a signal.
The reason for the crash is that the gcc alloca implementation leaves
garbage in the upper 32 bits of the sp register. This normally doesn't
matter (the upper bits are ignored because the PSW W-bit is clear),
however the signal delivery routine in the kernel uses full 64 bits of sp
and it fails with -EFAULT if the upper 32 bits are not zero.

I created this program that demonstrates the problem:

#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <alloca.h>

static __attribute__((noinline,noclone)) void aa(int *size)
{
void * volatile p = alloca(-*size);
while (1) ;
}

static void handler(int sig)
{
write(1, "signal delivered\n", 17);
_exit(0);
}

int main(void)
{
int size = -0x100;
signal(SIGALRM, handler);
alarm(1);
aa(&size);
}

If you compile it with optimizations, it will crash.
The "aa" function has this disassembly:

000106a0 <aa>:
   106a0:       08 03 02 41     copy r3,r1
   106a4:       08 1e 02 43     copy sp,r3
   106a8:       6f c1 00 80     stw,ma r1,40(sp)
   106ac:       37 dc 3f c1     ldo -20(sp),ret0
   106b0:       0c 7c 12 90     stw ret0,8(r3)
   106b4:       0f 40 10 9c     ldw 0(r26),ret0 ; ret0 = 0x00000000FFFFFF00
   106b8:       97 9c 00 7e     subi 3f,ret0,ret0 ; ret0 = 0xFFFFFFFF0000013F
   106bc:       d7 80 1c 1a     depwi 0,31,6,ret0 ; ret0 = 0xFFFFFFFF00000100
   106c0:       0b 9e 0a 1e     add,l sp,ret0,sp ;   sp = 0xFFFFFFFFxxxxxxxx
   106c4:       e8 1f 1f f7     b,l,n 106c4 <aa+0x24>,r0

This patch fixes the bug by truncating the "usp" variable to 32 bits.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: w5100: check return value after calling platform_get_resource()

[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix NULL pointer reference in cipso_v4_doi_free

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix sleeping in atomic context

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]

The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:

--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
   --> ath9k_hw_reset()
      --> ath9k_hw_gpio_request_in()
         --> ath9k_hw_gpio_request()
            --> ath9k_hw_gpio_cfg_soc()

Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.

Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix OOB read ar9300_eeprom_restore_internal

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>

parport: remove non-zero check on count

[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.

Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: give back URBs for unsent unlink requests during cleanup

[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]

In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.

To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.

[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76

Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"

[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix wrong release in sess_alloc_buffer() failed path

[ Upstream commit d72c74197b70bc3c95152f351a568007bffa3e11 ]

smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.

Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: rtsx_pci: Fix long reads when clock is prescaled

[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ]

For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.

During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.

This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.

I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.

Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Don't call dlm after protocol is unmounted

[ Upstream commit d1340f80f0b8066321b499a376780da00560e857 ]

In the gfs2 withdraw sequence, the dlm protocol is unmounted with a call
to lm_unmount. After a withdraw, users are allowed to unmount the
withdrawn file system. But at that point we may still have glocks left
over that we need to free via unmount's call to gfs2_gl_hash_clear.
These glocks may have never been completed because of whatever problem
caused the withdraw (IO errors or whatever).

Before this patch, function gdlm_put_lock would still try to call into
dlm to unlock these leftover glocks, which resulted in dlm returning
-EINVAL because the lock space was abandoned. These glocks were never
freed because there was no mechanism after that to free them.

This patch adds a check to gdlm_put_lock to see if the locking protocol
was inactive (DFL_UNMOUNT flag) and if so, free the glock and not
make the invalid call into dlm.

I could have combined this "if" with the one that follows, related to
leftover glock LVBs, but I felt the code was more readable with its own
if clause.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpc: fix gss_svc_init cleanup on failure

[ Upstream commit 5a4753446253a427c0ff1e433b9c4933e5af207c ]

The failure case here should be rare, but it's obviously wrong.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: tamonten: Fix UART pad setting

[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ]

This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.

Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()

[ Upstream commit a211260c34cfadc6068fece8c9e99e0fe1e2a2b6 ]

The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
  DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
       addr, *val);

Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
  val &= ~amdgpu_connector->router.ddc_mux_control_pin;

To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: avoid circular locks in sco_sock_connect

[ Upstream commit 734bc5ff783115aa3164f4e9dd5967ae78e0a8ab ]

In a future patch, calls to bh_lock_sock in sco.c should be replaced
by lock_sock now that none of the functions are run in IRQ context.

However, doing so results in a circular locking dependency:

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc4-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.2/14867 is trying to acquire lock:
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
lock_sock include/net/sock.h:1613 [inline]
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191

but task is already holding lock:
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_disconn_cfm include/net/bluetooth/hci_core.h:1497 [inline]
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_conn_hash_flush+0xda/0x260 net/bluetooth/hci_conn.c:1608

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock_common kernel/locking/mutex.c:959 [inline]
       __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
       hci_connect_cfm include/net/bluetooth/hci_core.h:1482 [inline]
       hci_remote_features_evt net/bluetooth/hci_event.c:3263 [inline]
       hci_event_packet+0x2f4d/0x7c50 net/bluetooth/hci_event.c:6240
       hci_rx_work+0x4f8/0xd30 net/bluetooth/hci_core.c:5122
       process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
       worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
       kthread+0x3e5/0x4d0 kernel/kthread.c:319
       ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

-> #1 (&hdev->lock){+.+.}-{3:3}:
       __mutex_lock_common kernel/locking/mutex.c:959 [inline]
       __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
       sco_connect net/bluetooth/sco.c:245 [inline]
       sco_sock_connect+0x227/0xa10 net/bluetooth/sco.c:601
       __sys_connect_file+0x155/0x1a0 net/socket.c:1879
       __sys_connect+0x161/0x190 net/socket.c:1896
       __do_sys_connect net/socket.c:1906 [inline]
       __se_sys_connect net/socket.c:1903 [inline]
       __x64_sys_connect+0x6f/0xb0 net/socket.c:1903
       do_syscall_x64 arch/x86/entry/common.c:50 [inline]
       do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
       check_prev_add kernel/locking/lockdep.c:3051 [inline]
       check_prevs_add kernel/locking/lockdep.c:3174 [inline]
       validate_chain kernel/locking/lockdep.c:3789 [inline]
       __lock_acquire+0x2a07/0x54a0 kernel/locking/lockdep.c:5015
       lock_acquire kernel/locking/lockdep.c:5625 [inline]
       lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
       lock_sock_nested+0xca/0x120 net/core/sock.c:3170
       lock_sock include/net/sock.h:1613 [inline]
       sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191
       sco_disconn_cfm+0x71/0xb0 net/bluetooth/sco.c:1202
       hci_disconn_cfm include/net/bluetooth/hci_core.h:1500 [inline]
       hci_conn_hash_flush+0x127/0x260 net/bluetooth/hci_conn.c:1608
       hci_dev_do_close+0x528/0x1130 net/bluetooth/hci_core.c:1778
       hci_unregister_dev+0x1c0/0x5a0 net/bluetooth/hci_core.c:4015
       vhci_release+0x70/0xe0 drivers/bluetooth/hci_vhci.c:340
       __fput+0x288/0x920 fs/file_table.c:280
       task_work_run+0xdd/0x1a0 kernel/task_work.c:164
       exit_task_work include/linux/task_work.h:32 [inline]
       do_exit+0xbd4/0x2a60 kernel/exit.c:825
       do_group_exit+0x125/0x310 kernel/exit.c:922
       get_signal+0x47f/0x2160 kernel/signal.c:2808
       arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
       handle_signal_work kernel/entry/common.c:148 [inline]
       exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
       exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
       __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
       syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
       ret_from_fork+0x15/0x30 arch/x86/entry/entry_64.S:288

other info that might help us debug this:

Chain exists of:
  sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hci_cb_list_lock);
                               lock(&hdev->lock);
                               lock(hci_cb_list_lock);
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);

 *** DEADLOCK ***

The issue is that the lock hierarchy should go from &hdev->lock -->
hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO. For example,
one such call trace is:

  hci_dev_do_close():
    hci_dev_lock();
    hci_conn_hash_flush():
      hci_disconn_cfm():
        mutex_lock(&hci_cb_list_lock);
        sco_disconn_cfm():
        sco_conn_del():
          lock_sock(sk);

However, in sco_sock_connect, we call lock_sock before calling
hci_dev_lock inside sco_connect, thus inverting the lock hierarchy.

We fix this by pulling the call to hci_dev_lock out from sco_connect.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()

[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ]

When compiling with clang in certain configurations, an objtool warning
appears:

drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()

This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.

Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output

[ Upstream commit dccd1dfd0770bfd494b68d1135b4547b2c602c42 ]

Move the "Platform Clock" routes for the "Internal Mic" and "Speaker"
routes to the intmic_*_map[] / *_spk_map[] arrays.

This ensures that these "Platform Clock" routes do not get added when the
BYT_RT5640_NO_INTERNAL_MIC_MAP / BYT_RT5640_NO_SPEAKERS quirks are used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: skip invalid hci_sync_conn_complete_evt

[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()

[ Upstream commit 3ad4a31620355358316fa08fcfab37b9d6c33347 ]

Last change to device managed APIs cleaned up error path to simple phy_exit()
call, which in some cases has been executed with NULL parameter. This per se
is not a problem, but rather logical misconception: no need to free resource
when it's for sure has not been allocated yet. Fix the driver accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: ks7010: Fix the initialization of the 'sleep_status' structure

[ Upstream commit 56315e55119c0ea57e142b6efb7c31208628ad86 ]

'sleep_status' has 3 atomic_t members. Initialize the 3 of them instead of
initializing only 2 of them and setting 0 twice to the same variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d2e52a33a9beab41879551d0ae2fdfc99970adab.1626856991.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_pci: make setup_port() parameters explicitly unsigned

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ]

The bar and offset parameters to setup_port() are used in pointer math,
and while it would be very difficult to get them to wrap as a negative
number, just be "safe" and make them unsigned so that static checkers do
not trip over them unintentionally.

Cc: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jordy Zomer <jordy@pwning.systems>
Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hvsi: don't panic on tty_register_driver failure

[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ]

The alloc_tty_driver failure is handled gracefully in hvsi_init. But
tty_register_driver is not. panic is called if that one fails.

So handle the failure of tty_register_driver gracefully too. This will
keep at least the console functional as it was enabled earlier by
console_initcall in hvsi_console_init. Instead of shooting down the
whole system.

This means, we disable interrupts and restore hvsi_wait back to
poll_for_state().

Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: ISS: don't panic in rs_init

[ Upstream commit 23411c720052ad860b3e579ee4873511e367130a ]

While alloc_tty_driver failure in rs_init would mean we have much bigger
problem, there is no reason to panic when tty_register_driver fails
there. It can fail for various reasons.

So handle the failure gracefully. Actually handle them both while at it.
This will make at least the console functional as it was enabled earlier
by console_initcall in iss_console_init. Instead of shooting down the
whole system.

We move tty_port_init() after alloc_tty_driver(), so that we don't need
to destroy the port in case the latter function fails.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Define RX trigger levels for OxSemi 950 devices

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ]

Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120.  This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.

For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable.  Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.

Lower the default receive interrupt trigger level to 32 then, and make
it configurable.  Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].

References:

[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
    Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
    Levels", p. 22

[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/jump_label: print real address in a case of a jump label bug

[ Upstream commit 5492886c14744d239e87f1b0b774b5a341e755cc ]

In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

flow_dissector: Fix out-of-bounds warnings

[ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ]

Fix the following out-of-bounds warnings:

    net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
     1104 |    memcpy(&key_addrs->v6addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1105 |           sizeof(key_addrs->v6addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ipv6.h:5,
                     from net/core/flow_dissector.c:6:
    include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
      133 |  struct in6_addr saddr;
          |                  ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
     1059 |    memcpy(&key_addrs->v4addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1060 |           sizeof(key_addrs->v4addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ip.h:17,
                     from net/core/flow_dissector.c:5:
    include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
      103 |  __be32 saddr;
          |         ^~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy().  So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()

[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]

Fix the following out-of-bounds warning:

    In function 'ip_copy_addrs',
        inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
      449 |  memcpy(&iph->saddr, &fl4->saddr,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      450 |         sizeof(fl4->saddr) + sizeof(fl4->daddr));
          |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: riva: Error out if 'pixclock' equals zero

[ Upstream commit f92763cb0feba247e0939ed137b495601fd072a5 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222
[   33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70
[   33.396969] Call Trace:
[   33.396973]  ? debug_smp_processor_id+0x1c/0x20
[   33.396984]  ? tick_nohz_tick_stopped+0x1a/0x90
[   33.396996]  ? rivafb_copyarea+0x3c0/0x3c0
[   33.397003]  ? wake_up_klogd.part.0+0x99/0xd0
[   33.397014]  ? vprintk_emit+0x110/0x4b0
[   33.397024]  ? vprintk_default+0x26/0x30
[   33.397033]  ? vprintk+0x9c/0x1f0
[   33.397041]  ? printk+0xba/0xed
[   33.397054]  ? record_print_text.cold+0x16/0x16
[   33.397063]  ? __kasan_check_read+0x11/0x20
[   33.397074]  ? profile_tick+0xc0/0x100
[   33.397084]  ? __sanitizer_cov_trace_const_cmp4+0x24/0x80
[   33.397094]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397102]  rivafb_set_par+0xbe/0x610
[   33.397111]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397119]  fb_set_var+0x5bf/0xeb0
[   33.397127]  ? fb_blank+0x1a0/0x1a0
[   33.397134]  ? lock_acquire+0x1ef/0x530
[   33.397143]  ? lock_release+0x810/0x810
[   33.397151]  ? lock_is_held_type+0x100/0x140
[   33.397159]  ? ___might_sleep+0x1ee/0x2d0
[   33.397170]  ? __mutex_lock+0x620/0x1190
[   33.397180]  ? trace_hardirqs_on+0x6a/0x1c0
[   33.397190]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: kyro: Error out if 'pixclock' equals zero

[ Upstream commit 1520b4b7ba964f8eec2e7dd14c571d50de3e5191 ]

The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.

Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().

The following log reveals it:

[  103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[  103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118
[  103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80
[  103.074045] Call Trace:
[  103.074048]  ? ___might_sleep+0x1ee/0x2d0
[  103.074060]  ? kyrofb_ioctl+0x330/0x330
[  103.074069]  fb_set_var+0x5bf/0xeb0
[  103.074078]  ? fb_blank+0x1a0/0x1a0
[  103.074085]  ? lock_acquire+0x3bd/0x530
[  103.074094]  ? lock_release+0x810/0x810
[  103.074103]  ? ___might_sleep+0x1ee/0x2d0
[  103.074114]  ? __mutex_lock+0x620/0x1190
[  103.074126]  ? trace_hardirqs_on+0x6a/0x1c0
[  103.074137]  do_fb_ioctl+0x31e/0x700
[  103.074144]  ? fb_getput_cmap+0x280/0x280
[  103.074152]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074162]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074171]  ? __sanitizer_cov_trace_switch+0x67/0xf0
[  103.074181]  ? __sanitizer_cov_trace_const_cmp2+0x20/0x80
[  103.074191]  ? do_vfs_ioctl+0x14b/0x16c0
[  103.074199]  ? vfs_fileattr_set+0xb60/0xb60
[  103.074207]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074216]  ? lock_release+0x483/0x810
[  103.074224]  ? __fget_files+0x217/0x3d0
[  103.074234]  ? __fget_files+0x239/0x3d0
[  103.074243]  ? do_fb_ioctl+0x700/0x700
[  103.074250]  fb_ioctl+0xe6/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: asiliantfb: Error out if 'pixclock' equals zero

[ Upstream commit b36b242d4b8ea178f7fd038965e3cac7f30c3f09 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224
[   43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730
[   43.861843] Call Trace:
[   43.861848]  ? asiliantfb_remove+0x190/0x190
[   43.861858]  fb_set_var+0x2e4/0xeb0
[   43.861866]  ? fb_blank+0x1a0/0x1a0
[   43.861873]  ? lock_acquire+0x1ef/0x530
[   43.861884]  ? lock_release+0x810/0x810
[   43.861892]  ? lock_is_held_type+0x100/0x140
[   43.861903]  ? ___might_sleep+0x1ee/0x2d0
[   43.861914]  ? __mutex_lock+0x620/0x1190
[   43.861921]  ? do_fb_ioctl+0x313/0x700
[   43.861929]  ? mutex_lock_io_nested+0xfa0/0xfa0
[   43.861936]  ? __this_cpu_preempt_check+0x1d/0x30
[   43.861944]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861952]  ? lockdep_hardirqs_on+0x59/0x100
[   43.861959]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861967]  ? trace_hardirqs_on+0x6a/0x1c0
[   43.861978]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf/tests: Do not PASS tests without actually testing the result

[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]

Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.

Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.

There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf/tests: Fix copy-and-paste error in double word test

[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]

This test now operates on DW as stated instead of W, which was
already covered by another test.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: jsm: hold port lock when reporting modem line changes

[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ]

uart_handle_dcd_change() requires a port lock to be held and will emit a
warning when lockdep is enabled.

Held corresponding lock to fix the following warnings.

[  132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120
[  132.530482] Modules linked in:
[  132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31
[  132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120
[  132.557100] Call Trace:
[  132.557562]  ? __free_pages+0x83/0xb0
[  132.558213]  neo_parse_modem+0x156/0x220
[  132.558897]  neo_param+0x399/0x840
[  132.559495]  jsm_tty_open+0x12f/0x2d0
[  132.560131]  uart_startup.part.18+0x153/0x340
[  132.560888]  ? lock_is_held_type+0xe9/0x140
[  132.561660]  uart_port_activate+0x7f/0xe0
[  132.562351]  ? uart_startup.part.18+0x340/0x340
[  132.563003]  tty_port_open+0x8d/0xf0
[  132.563523]  ? uart_set_options+0x1e0/0x1e0
[  132.564125]  uart_open+0x24/0x40
[  132.564604]  tty_open+0x15c/0x630

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: board: Fix uninitialized spinlock when attaching genpd

[ Upstream commit df00609821bf17f50a75a446266d19adb8339d84 ]

On Armadillo-800-EVA with CONFIG_DEBUG_SPINLOCK=y:

    BUG: spinlock bad magic on CPU#0, swapper/1
     lock: lcdc0_device+0x10c/0x308, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
    CPU: 0 PID: 1 Comm: swapper Not tainted 5.11.0-rc5-armadillo-00036-gbbca04be7a80-dirty #287
    Hardware name: Generic R8A7740 (Flattened Device Tree)
    [<c010c3c8>] (unwind_backtrace) from [<c010a49c>] (show_stack+0x10/0x14)
    [<c010a49c>] (show_stack) from [<c0159534>] (do_raw_spin_lock+0x20/0x94)
    [<c0159534>] (do_raw_spin_lock) from [<c040858c>] (dev_pm_get_subsys_data+0x8c/0x11c)
    [<c040858c>] (dev_pm_get_subsys_data) from [<c05fbcac>] (genpd_add_device+0x78/0x2b8)
    [<c05fbcac>] (genpd_add_device) from [<c0412db4>] (of_genpd_add_device+0x34/0x4c)
    [<c0412db4>] (of_genpd_add_device) from [<c0a1ea74>] (board_staging_register_device+0x11c/0x148)
    [<c0a1ea74>] (board_staging_register_device) from [<c0a1eac4>] (board_staging_register_devices+0x24/0x28)

of_genpd_add_device() is called before platform_device_register(), as it
needs to attach the genpd before the device is probed.  But the spinlock
is only initialized when the device is registered.

Fix this by open-coding the spinlock initialization, cfr.
device_pm_init_common() in the internal drivers/base code, and in the
SuperH early platform code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/57783ece7ddae55f2bda2f59f452180bff744ea0.1626257398.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: composite: Allow bMaxPower=0 if self-powered

[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]

Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.

This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.

The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set.  An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.

Co-developed-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_ether: fix a potential null pointer dereference

[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]

f_ncm tx timeout can call us with null skb to flush
a pending frame.  In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.

In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.

Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
 of view of the host, so here IN actually means outbound...)

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg210: fix the actual_length of an iso packet

[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]

We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fotg210: fix the endpoint's transactional opportunities calculation

[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ]

Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Smack: Fix wrong semantics in smk_access_entry()

[ Upstream commit 6d14f5c7028eea70760df284057fe198ce7778dd ]

In the smk_access_entry() function, if no matching rule is found
in the rust_list, a negative error code will be used to perform bit
operations with the MAY_ enumeration value. This is semantically
wrong. This patch fixes this issue.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: Deal with ESRCH error in nlmsg_notify()

[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]

Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: kyro: fix a DoS bug by restricting user input

[ Upstream commit 98a65439172dc69cb16834e62e852afc2adb83ed ]

The user can pass in any value to the driver through the 'ioctl'
interface. The driver dost not check, which may cause DoS bugs.

The following log reveals it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476
Call Trace:
 kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline]
 kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603
 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171
 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739
 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dac: ad5624r: Fix incorrect handling of an optional regulator.

[ Upstream commit 97683c851f9cdbd3ea55697cbe2dcb6af4287bbd ]

The naming of the regulator is problematic.  VCC is usually a supply
voltage whereas these devices have a separate VREF pin.

Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.

In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Use pci_update_current_state() in pci_enable_device_flags()

[ Upstream commit 14858dcc3b3587f4bb5c48e130ee7d68fc2b0a29 ]

Updating the current_state field of struct pci_dev the way it is done
in pci_enable_device_flags() before calling do_pci_enable_device() may
not work.  For example, if the given PCI device depends on an ACPI
power resource whose _STA method initially returns 0 ("off"), but the
config space of the PCI device is accessible and the power state
retrieved from the PCI_PM_CTRL register is D0, the current_state
field in the struct pci_dev representing that device will get out of
sync with the power.state of its ACPI companion object and that will
lead to power management issues going forward.

To avoid such issues, make pci_enable_device_flags() call
pci_update_current_state() which takes ACPI device power management
into account, if present, to retrieve the current power state of the
device.

Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxs-dcp - Use sg_mapping_iter to copy data

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : [<c053e7c8>]    lr : [<d7b2bc9d>]    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160)
[   69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Malta: fix alignment of the devicetree buffer

[ Upstream commit bea6a94a279bcbe6b2cde348782b28baf12255a5 ]

Starting with following patch MIPS Malta is not able to boot:
| commit 79edff12060fe7772af08607eff50c0e2486c5ba
| Author: Rob Herring <robh@kernel.org>
| scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9

The reason is the alignment test added to the fdt_ro_probe_(). To fix
this issue, we need to make sure that fdt_buf is aligned.

Since the dtc patch was designed to uncover potential issue, I handle
initial MIPS Malta patch as initial bug.

Fixes: e81a8c7dabac ("MIPS: Malta: Setup RAM regions via DT")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()

[ Upstream commit d789a490d32fdf0465275e3607f8a3bc87d3f3ba ]

Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which
is the same as that returned in pcs_parse_pinconf().

Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: don't printk() unconditionally

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]

Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:

or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio: Use config not menuconfig for VFIO_NOIOMMU

[ Upstream commit 26c22cfde5dd6e63f25c48458b0185dcb0fbb2fd ]

VFIO_NOIOMMU is supposed to be an element in the VFIO menu, not start
a new menu. Correct this copy-paste mistake.

Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/0-v1-3f0b685c3679+478-vfio_menuconfig_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure

commit a8bd29bd49c4156ea0ec5a97812333e2aeef44e7 upstream.

The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.

If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.

When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno.  But after
e4585da22ad0 ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.

Userspace may rely on the ~0 data to detect errors, but after e4585da22ad0,
that would not detect CAP_SYS_ADMIN errors.

Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.

[bhelgaas: commit log, fold in Nathan's fix
https://lore.kernel.org/r/20210803200836.500658-1-nathan@kernel.org]
Fixes: e4585da22ad0 ("pci syscall.c: Switch to refcounting API")
Link: https://lore.kernel.org/r/20210729233755.1509616-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported

commit b12d93e9958e028856cbcb061b6e64728ca07755 upstream.

The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported
of 512, but in fact it cannot handle incoming TLPs with payload size of
512.

We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark
and DesignWare), where the issue presents itself as an External Abort.
Bjorn Helgaas says:

  Probably ASM1062 reports a Malformed TLP error when it receives a data
  payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an
  arm64 External Abort. [1]

To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256
bytes, so we set the Max Payload Size of devices that may send TLPs to the
ASM1062 to 256 or less.

[1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695
Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org
Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9105/1: atags_to_fdt: don't warn about stack size

commit b30d0289de72c62516df03fdad8d53f552c69839 upstream.

The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:

arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]

However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.

This just shuts up the warning by disabling the warning flag for this
file.

Tested on Nexus 7 2012 builds.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs

commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream.

Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.

But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.

Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.

Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc-loopback: return number of emitters rather than error

commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream.

The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uvc: don't do DMA on stack

commit 1a10d7fdb6d0e235e9d230916244cc2769d3f170 upstream.

As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)

those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.

So, use a kmalloc'ed buffer.

Cc: stable@vger.kernel.org # Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: fix NULL pointer dereference when unmapping queue pair

commit a30dc6cf0dc51419021550152e435736aaef8799 upstream.

I got a NULL pointer dereference report when doing fuzz test:

Call Trace:
  qp_release_pages+0xae/0x130
  qp_host_unregister_user_memory.isra.25+0x2d/0x80
  vmci_qp_broker_unmap+0x191/0x320
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  vmci_host_unlocked_ioctl+0x59f/0xd50
  ? do_vfs_ioctl+0x14b/0xa10
  ? tomoyo_file_ioctl+0x28/0x30
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  __x64_sys_ioctl+0xea/0x120
  do_syscall_64+0x34/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.

vmci_host_unlocked_ioctl
  vmci_host_do_alloc_queuepair
    vmci_qp_broker_alloc
      qp_broker_alloc
        qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;

When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.

Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.

Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: max17042: handle fails of reading status register

commit 54784ffa5b267f57161eb8fbb811499f22a0a0bf upstream.

Reading status register can fail in the interrupt handler.  In such
case, the regmap_read() will not store anything useful under passed
'val' variable and random stack value will be used to determine type of
interrupt.

Handle the regmap_read() failure to avoid handling interrupt type and
triggering changed power supply event based on random stack value.

Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: public_key: fix overflow during implicit conversion

commit f985911b7bc75d5c98ed24d8aaa8b94c590f7c6a upstream.

Hit kernel warning like this, it can be reproduced by verifying 256
bytes datafile by keyctl command, run script:
RAWDATA=rawdata
SIGDATA=sigdata

modprobe pkcs8_key_parser

rm -rf *.der *.pem *.pfx
rm -rf $RAWDATA
dd if=/dev/random of=$RAWDATA bs=256 count=1

openssl req -nodes -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem \
  -subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=xx.com/emailAddress=yy@xx.com"

KEY_ID=`openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER | keyctl \
  padd asymmetric 123 @s`

keyctl pkey_sign $KEY_ID 0 $RAWDATA enc=pkcs1 hash=sha1 > $SIGDATA
keyctl pkey_verify $KEY_ID 0 $RAWDATA $SIGDATA enc=pkcs1 hash=sha1

Then the kernel reports:
 WARNING: CPU: 5 PID: 344556 at crypto/rsa-pkcs1pad.c:540
   pkcs1pad_verify+0x160/0x190
 ...
 Call Trace:
  public_key_verify_signature+0x282/0x380
  ? software_key_query+0x12d/0x180
  ? keyctl_pkey_params_get+0xd6/0x130
  asymmetric_key_verify_signature+0x66/0x80
  keyctl_pkey_verify+0xa5/0x100
  do_syscall_64+0x35/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The reason of this issue, in function 'asymmetric_key_verify_signature':
'.digest_size(u8) = params->in_len(u32)' leads overflow of an u8 value,
so use u32 instead of u8 for digest_size field. And reorder struct
public_key_signature, it saves 8 bytes on a 64-bit machine.

Cc: stable@vger.kernel.org
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix setting of max_pfn in shared_info

commit 4b511d5bfa74b1926daefd1694205c7f1bcf677f upstream.

Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.

Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.

The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.

Fix that by setting shared_info->max_pfn to the last possible PFN + 1.

Fixes: 98dd166ea3a3c3 ("x86/xen/p2m: hint at the last populated P2M entry")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf/hv-gpci: Fix counter value parsing

commit f9addd85fbfacf0d155e83dbee8696d6df5ed0c7 upstream.

H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in
the result buffer. Result buffer has specific format defined in the PAPR
specification. One of the fields is counter offset and width of the
counter data returned.

Counter data are returned in a unsigned char array in big endian byte
order. To get the final counter data, the values must be left shifted
byte at a time. But commit 220a0c609ad17 ("powerpc/perf: Add support for
the hv gpci (get performance counter info) interface") made the shifting
bitwise and also assumed little endian order. Because of that, hcall
counters values are reported incorrectly.

In particular this can lead to counters go backwards which messes up the
counter prev vs now calculation and leads to huge counter value
reporting:

  #: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
           -C 0 -I 1000
        time             counts unit events
     1.000078854 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000213293                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     3.000320107                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     4.000428392                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     5.000537864                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     6.000649087                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     7.000760312                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     8.000865218             16,448      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     9.000978985 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    10.001088891             16,384      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    11.001201435                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    12.001307937 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

Fix the shifting logic to correct match the format, ie. read bytes in
big endian order.

Fixes: e4f226b1580b ("powerpc/perf/hv-gpci: Increase request buffer size")
Cc: stable@vger.kernel.org # v4.6+
Reported-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210813082158.429023-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Skip masking MSI-X on Xen PV

commit 1a519dc7a73c977547d8b5108d98c6e769c89f4b upstream.

When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:

    BUG: unable to handle page fault for address: ffffc9004069100c
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0003) - permissions violation
    RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
     e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
     e1000_probe+0x41f/0xdb0 [e1000e]
     local_pci_probe+0x42/0x80
    (...)

The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.

Add the check to make this function XEN PV compatible.

Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: tps65910: Correct driver module alias

commit 8d448fa0a8bb1c8d94eef7647edffe9ac81a281e upstream.

The TPS65910 RTC driver module doesn't auto-load because of the wrong
module alias that doesn't match the device name, fix it.

Cc: stable@vger.kernel.org
Reported-by: Anton Bambura <jenneron@protonmail.com>
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: don't allow too huge resolutions

commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream.

syzbot is reporting page fault at vga16fb_fillrect() [1], for
vga16fb_check_var() is failing to detect multiplication overflow.

  if (vxres * vyres > maxmem) {
    vyres = maxmem / vxres;
    if (vyres < yres)
      return -ENOMEM;
  }

Since no module would accept too huge resolutions where multiplication
overflow happens, let's reject in the common path.

Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e
Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com>
Debugged-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: kirkwood: Fix a clocking boot regression

commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.

Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:

Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)

This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:

        /* Count, allocate, and register clock muxes */
        for (n = 0; desc[n].name;)
                n++;

Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.

Fix this by terminating the array with a blank entry.

Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IMA: remove -Wmissing-prototypes warning

commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream.

With W=1 build, the compiler throws warning message as below:

   security/integrity/ima/ima_mok.c:24:12: warning:
   no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
       __init int ima_mok_init(void)

Silence the warning by adding static keyword to ima_mok_init().

Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted

commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream.

When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.

Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix data race between tiocsti() and flush_to_ldisc()

commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream.

The ops->receive_buf() may be accessed concurrently from these two
functions.  If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.

For example:
tty_ioctl |tty_ldisc_receive_buf
 ->tioctsi | ->tty_port_default_receive_buf
|  ->tty_ldisc_receive_buf
   ->hci_uart_tty_receive |   ->hci_uart_tty_receive
    ->h4_recv                   |    ->h4_recv

In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.

Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.

Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: make exception cache less predictible

[ Upstream commit 67d6d681e15b578c1725bad8ad079e05d1c48a8e ]

Even after commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.

This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().

Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcma: Fix memory leak for internally-handled cores

[ Upstream commit b63aed3ff195130fef12e0af590f4838cf0201d8 ]

kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.

While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.

Fixes: ab54bc8460b5 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()

[ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ]

This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function.  But it should return
an error code here as well if we ever do hit it because of a
race condition or something.

Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ehci-orion: Handle errors of clk_prepare_enable() in probe

[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ]

ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.

Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mt65xx: fix IRQ check

[ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ]

Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful).  Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...

Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

CIFS: Fix a potencially linear read overflow

[ Upstream commit f980d055a0f858d73d9467bb0b570721bbfcdfb8 ]

strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.

Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.

So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.

Fixes: 066ce6899484d ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: moxart: Fix issue with uninitialized dma_slave_config

[ Upstream commit ee5165354d498e5bceb0b386e480ac84c5f8c28c ]

Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.

For moxart, this is probably not currently an issue but is still good to
fix though.

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: dw_mmc: Fix issue with uninitialized dma_slave_config

[ Upstream commit c3ff0189d3bc9c03845fe37472c140f0fefd0c79 ]

Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.

For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.

For dw_mmc, this is probably not currently an issue but is still good to
fix though.

Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support")
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: s3c2410: fix IRQ check

[ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ]

Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful).  Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...

Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iop3xx: fix deferred probing

[ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ]

When adding the code to handle platform_get_irq*() errors in the commit
489447380a29 ("handle errors returned by platform_get_irq*()"), the
actual error code was enforced to be -ENXIO in the driver for some
strange reason.  This didn't matter much until the deferred probing was
introduced -- which requires an actual error code to be propagated
upstream from the failure site.

While fixing this, also stop overriding the errors from request_irq() to
-EIO (done since the pre-git era).

Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: add timeout sanity check to hci_inquiry

[ Upstream commit f41a4b2b5eb7872109723dab8ae1603bdd9d9ec1 ]

Syzbot hit "task hung" bug in hci_req_sync(). The problem was in
unreasonable huge inquiry timeout passed from userspace.
Fix it by adding sanity check for timeout value to hci_inquiry().

Since hci_inquiry() is the only user of hci_req_sync() with user
controlled timeout value, it makes sense to check timeout value in
hci_inquiry() and don't touch hci_req_sync().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+be2baed593ea56c6a84c@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: mv_u3d: request_irq() after initializing UDC

[ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ]

If IRQ occurs between calling  request_irq() and  mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().

The patch puts registration of the interrupt handler after
initializing of neccesery data.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: tahvo: add IRQ check

[ Upstream commit 0d45a1373e669880b8beaecc8765f44cb0241e47 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code.  Stop calling request_threaded_irq() with the invalid
IRQ #s.

Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: ohci-tmio: add IRQ check

[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ]

The driver neglects to check the  result of platform_get_irq()'s call and
blithely passes the negative error codes to usb_add_hcd() (which takes
*unsigned* IRQ #), causing request_irq() that it calls to fail with
-EINVAL, overriding an original error code. Stop calling usb_add_hcd()
with the invalid IRQ #s.

Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Move shutdown callback before flushing tx and rx queue

[ Upstream commit 0ea53674d07fb6db2dd7a7ec2fdc85a12eb246c2 ]

Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues
are flushed or cancelled") introduced a regression that makes mtkbtsdio
driver stops working:
[   36.593956] Bluetooth: hci0: Firmware already downloaded
[   46.814613] Bluetooth: hci0: Execution of wmt command timed out
[   46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110)

The shutdown callback depends on the result of hdev->rx_work, so we
should call it before flushing rx_work:
-> btmtksdio_shutdown()
 -> mtk_hci_wmt_sync()
  -> __hci_cmd_send()
   -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared

-> btmtksdio_recv_event()
 -> hci_recv_frame()
  -> queue_work(hdev->workqueue, &hdev->rx_work)
   -> clears BTMTKSDIO_TX_WAIT_VND_EVT

So move the shutdown callback before flushing TX/RX queue to resolve the
issue.

Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: twl6030: add IRQ checks

[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]

The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code.  Stop calling request_threaded_irq() with the
invalid IRQ #s.

Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: fsl-usb: add IRQ check

[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.

Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: at91: add IRQ check

[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling devm_request_irq() with the invalid IRQ #s.

Fixes: 8b2e76687b39 ("USB: AT91 UDC updates, mostly power management")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/6654a224-739a-1a80-12f0-76d920f87b6c@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Fix some reference counted resource leaks

[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ]

'of_find_device_by_node()' takes a reference that must be released when
not needed anymore.
This is expected to be done in 'dsi_destroy()'.

However, there are 2 issues in 'dsi_get_phy()'.

First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()'
returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference
won't be released in 'dsi_destroy()'.

Secondly, as 'of_find_device_by_node()' already takes a reference, there is
no need for an additional 'get_device()'.

Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the
unneeded 'get_device()' to solve both issues.

Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: fix repeated calls to sco_sock_kill

[ Upstream commit e1dee2c1de2b4dd00eb44004a4bda6326ed07b59 ]

In commit 4e1a720d0312 ("Bluetooth: avoid killing an already killed
socket"), a check was added to sco_sock_kill to skip killing a socket
if the SOCK_DEAD flag was set.

This was done after a trace for a use-after-free bug showed that the
same sock pointer was being killed twice.

Unfortunately, this check prevents sco_sock_kill from running on any
socket. sco_sock_kill kills a socket only if it's zapped and orphaned,
however sock_orphan announces that the socket is dead before detaching
it. i.e., orphaned sockets have the SOCK_DEAD flag set.

To fix this, we remove the check for SOCK_DEAD, and avoid repeated
calls to sco_sock_kill by removing incorrect calls in:

1. sco_sock_timeout. The socket should not be killed on timeout as
further processing is expected to be done. For example,
sco_sock_connect sets the timer then waits for the socket to be
connected or for an error to be returned.

2. sco_conn_del. This function should clean up resources for the
connection, but the socket itself should be cleaned up in
sco_sock_release.

3. sco_sock_close. Calls to sco_sock_close in sco_sock_cleanup_listen
and sco_sock_release are followed by sco_sock_kill. Hence the
duplicated call should be removed.

Fixes: 4e1a720d0312 ("Bluetooth: avoid killing an already killed socket")
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7

[ Upstream commit 01c72cad790cb6cd3ccbe4c1402b6cb6c6bbffd0 ]

The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by
ARM).

Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow

[ Upstream commit 713baf3dae8f45dc8ada4ed2f5fdcbf94a5c274d ]

An earlier commit replaced using batostr to using %pMR sprintf for the
construction of session->name. Static analysis detected that this new
method can use a total of 21 characters (including the trailing '\0')
so we need to increase the BTNAMSIZ from 18 to 21 to fix potential
buffer overflows.

Addresses-Coverity: ("Out-of-bounds write")
Fixes: fcb73338ed53 ("Bluetooth: Use %pMR in sprintf/seq_printf instead of batostr")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: smsm: Fix missed interrupts if state changes while masked

[ Upstream commit e3d4571955050736bbf3eda0a9538a09d9fcfce8 ]

The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.

For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.

Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.

This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:

qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
  Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK

Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: PM: Enable PME if it can be signaled from D3cold

[ Upstream commit 0e00392a895c95c6d12d42158236c8862a2f43f2 ]

PME signaling is only enabled by __pci_enable_wake() if the target
device can signal PME from the given target power state (to avoid
pointless reconfiguration of the device), but if the hierarchy above
the device goes into D3cold, the device itself will end up in D3cold
too, so if it can signal PME from D3cold, it should be enabled to
do so in __pci_enable_wake().

[Note that if the device does not end up in D3cold and it cannot
 signal PME from the original target power state, it will not signal
 PME, so in that case the behavior does not change.]

Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/
Fixes: 5bcc2fb4e815 ("PCI PM: Simplify PCI wake-up code")
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: highlander: add IRQ check

[ Upstream commit f16a3bb69aa6baabf8f0aca982c8cf21e2a4f6bc ]

The driver is written as if platform_get_irq() returns 0 on errors (while
actually it returns a negative error code), blithely passing these error
codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with
-EINVAL. Add the necessary error check to the pre-existing *if* statement
forcing the driver into the polling mode...

Fixes: 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: cipso: fix warnings in netlbl_cipsov4_add_std

[ Upstream commit 8ca34a13f7f9b3fa2c464160ffe8cc1a72088204 ]

Syzbot reported warning in netlbl_cipsov4_add(). The
problem was in too big doi_def->map.std->lvl.local_size
passed to kcalloc(). Since this value comes from userpace there is
no need to warn if value is not correct.

The same problem may occur with other kcalloc() calls in
this function, so, I've added __GFP_NOWARN flag to all
kcalloc() calls there.

Reported-and-tested-by: syzbot+cdd51ee2e6b0b2e18c0d@syzkaller.appspotmail.com
Fixes: 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos

[ Upstream commit 525e2f9fd0229eb10cb460a9e6d978257f24804e ]

st->bucket stores the current bucket number.
st->offset stores the offset within this bucket that is the sk to be
seq_show().  Thus, st->offset only makes sense within the same
st->bucket.

These two variables are an optimization for the common no-lseek case.
When resuming the seq_file iteration (i.e. seq_start()),
tcp_seek_last_pos() tries to continue from the st->offset
at bucket st->bucket.

However, it is possible that the bucket pointed by st->bucket
has changed and st->offset may end up skipping the whole st->bucket
without finding a sk.  In this case, tcp_seek_last_pos() currently
continues to satisfy the offset condition in the next (and incorrect)
bucket.  Instead, regardless of the offset value, the first sk of the
next bucket should be returned.  Thus, "bucket == st->bucket" check is
added to tcp_seek_last_pos().

The chance of hitting this is small and the issue is a decade old,
so targeting for the next tree.

Fixes: a8b690f98baf ("tcp: Fix slowness in read /proc/net/tcp")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200541.1033917-1-kafai@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>