Linus Torvalds [Mon, 7 Apr 2014 18:09:13 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
"The biggest chunk is a series of patches from Ilya that add support
for new Ceph osd and crush map features, including some new tunables,
primary affinity, and the new encoding that is needed for erasure
coding support. This brings things into parity with the server side
and the looming firefly release. There is also support for allocation
hints in RBD that help limit fragmentation on the server side.
There is also a series of patches from Zheng fixing NFS reexport,
directory fragmentation support, flock vs fnctl behavior, and some
issues with clustered MDS.
Finally, there are some miscellaneous fixes from Yunchuan Wen for
fscache, Fabian Frederick for ACLs, and from me for fsync(dirfd)
behavior"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (79 commits)
ceph: skip invalid dentry during dcache readdir
libceph: dump pool {read,write}_tier to debugfs
libceph: output primary affinity values on osdmap updates
ceph: flush cap release queue when trimming session caps
ceph: don't grabs open file reference for aborted request
ceph: drop extra open file reference in ceph_atomic_open()
ceph: preallocate buffer for readdir reply
libceph: enable PRIMARY_AFFINITY feature bit
libceph: redo ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
libceph: add support for osd primary affinity
libceph: add support for primary_temp mappings
libceph: return primary from ceph_calc_pg_acting()
libceph: switch ceph_calc_pg_acting() to new helpers
libceph: introduce apply_temps() helper
libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpers
libceph: ceph_can_shift_osds(pool) and pool type defines
libceph: ceph_osd_{exists,is_up,is_down}(osd) definitions
libceph: enable OSDMAP_ENC feature bit
libceph: primary_affinity decode bits
libceph: primary_affinity infrastructure
...
Linus Torvalds [Mon, 7 Apr 2014 17:55:36 +0000 (10:55 -0700)]
Merge tag 'for-f2fs-3.15' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches.
- introduce large directory support
- introduce f2fs_issue_flush to merge redundant flush commands
- merge write IOs as much as possible aligned to the segment
- add sysfs entries to tune the f2fs configuration
- use radix_tree for the free_nid_list to reduce in-memory operations
- remove costly bit operations in f2fs_find_entry
- enhance the readahead flow for CP/NAT/SIT/SSA blocks
The other bug fixes are as follows:
- recover xattr node blocks correctly after sudden-power-cut
- fix to calculate the maximum number of node ids
- enhance to handle many error cases
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
f2fs: fix wrong statistics of inline data
f2fs: check the acl's validity before setting
f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
f2fs: fix to cover io->bio with io_rwsem
f2fs: fix error path when fail to read inline data
f2fs: use list_for_each_entry{_safe} for simplyfying code
f2fs: avoid free slab cache under spinlock
f2fs: avoid unneeded lookup when xattr name length is too long
f2fs: avoid unnecessary bio submit when wait page writeback
f2fs: return -EIO when node id is not matched
f2fs: avoid RECLAIM_FS-ON-W warning
f2fs: skip unnecessary node writes during fsync
f2fs: introduce fi->i_sem to protect fi's info
f2fs: change reclaim rate in percentage
f2fs: add missing documentation for dir_level
f2fs: remove unnecessary threshold
f2fs: throttle the memory footprint with a sysfs entry
f2fs: avoid to drop nat entries due to the negative nr_shrink
f2fs: call f2fs_wait_on_page_writeback instead of native function
f2fs: introduce nr_pages_to_write for segment alignment
...
Linus Torvalds [Mon, 7 Apr 2014 17:47:51 +0000 (10:47 -0700)]
Merge tag 'fbdev-omap-3.15' of git://git./linux/kernel/git/tomba/linux
Pull OMAP fbdev changes from Tomi Valkeinen:
"This is based on the already pulled fbdev-main changes, and this also
merges .dts branch from Tony Lindgren (which has also been pulled), so
that I was able to add the display related .dts changes.
This contains OMAP related fbdev changes for 3.15. The bulk of the
patches are for adding Device Tree support for OMAP Display Subsystem:
- SoCs: OMAP2/3/4
- Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM,
OMAP3 IGEP0020, OMAP3 N900
- Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony
acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and
Analog TV connectors"
* tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits)
OMAPDSS: HDMI: fix interlace output
OMAPDSS: add missing __init for dss_init_ports
ARM: OMAP2+: remove pdata quirks for displays
OMAPDSS: remove DT hacks for regulators
Doc/DT: Add DT binding documentation for tpd12s015 encoder
Doc/DT: Add DT binding documentation for TFP410 encoder
Doc/DT: Add DT binding documentation for Sony acx565akm panel
Doc/DT: Add DT binding documentation for MIPI DSI CM Panel
Doc/DT: Add DT binding documentation for HDMI Connector
Doc/DT: Add DT binding documentation for DVI Connector
Doc/DT: Add DT binding documentation for Analog TV Connector
ARM: omap3-n900.dts: add display information
ARM: omap3-igep0020.dts: add display information
ARM: omap3-beagle-xm.dts: add display information
ARM: omap3-beagle.dts: add display information
ARM: omap4-sdp.dts: add display information
Doc/DT: Add DT binding documentation for OMAP DSS
OMAPDSS: acx565akm: Add DT support
OMAPDSS: connector-analog-tv: Add DT support
OMAPDSS: hdmi-connector: Add DT support
...
Linus Torvalds [Mon, 7 Apr 2014 17:24:18 +0000 (10:24 -0700)]
Merge tag 'mfd-for-linus-3.15' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
- Advanced error handling - omap
- Rework clk management - omap
- Device Tree (re-)work - tc3589x, pm8921, da9055, sec
- IRC management overhaul and !BROKEN - pm8921
- Convert to regmap - ssbi, pm8921
- Use simple power-management ops - ucb1x00
- Include file clean-up - adp5520, cs5535, janz, lpc_ich,
- lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
rdc321x-southbridge, retu, smsc-
ece1099, ti-ssp, ti_am335x_tscadc,
tps65912, vexpress-config, wm8350, ywm8350
- Various bug fixes across the subsystem
- NULL/invalid pointer dereference prevention
- Resource leak mitigation,
- Variable used initialised
- Staticise various containers
- Enforce return value checks
New drivers/supported devices:
- Add support for s2mps14 and s2mpa01 to sec
- Add support for da9063 (v5) to da9063
- Add support for atom-c2000 to gpio-ich
- Add support for come-{mbt10,cbt6,chl6} to kempld
- Add support for da9053 to da9052
- Add support for itco-wdt (v3) and baytrail to lpc_ich
- Add new drivers for tps65218, rtsx_usb, bcm590xx
(Re-)moved drivers:
- twl4030 ==> drivers/iio
- ti-ssp ==> /dev/null"
* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
mfd: wm5110: Correct default for HEADPHONE_DETECT_1
mfd: arizona: Correct small errors in the DT binding documentation
mfd: arizona: Mark DSP clocking register as volatile
mfd: devicetree: bindings: Add pm8xxx RTC description
mfd: kempld-core: Fix potential hang-up during boot
mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
mfd: sec-core: Fix I2C dummy device resource leak on probe failure
mfd: sec-core: Add of_compatible strings for clock MFD cells
mfd: Remove obsolete ti-ssp driver
Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
mfd: bcm590xx: Fix type argument for module device table
mfd: lpc_ich: Add support for Intel Bay Trail SoC
mfd: lpc_ich: Add support for NM10 GPIO
mfd: lpc_ich: Change Avoton to iTCO v3
watchdog: iTCO_wdt: Add support for v3 silicon
mfd: lpc_ich: Add support for iTCO v3
mfd: lpc_ich: Remove lpc_ich_cfg struct use
mfd: lpc_ich: Only configure watchdog or GPIO when present
...
Linus Torvalds [Mon, 7 Apr 2014 17:17:30 +0000 (10:17 -0700)]
Merge tag 'for-linus-
20140405' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
- A few SPI NOR ID definitions
- Kill the NAND "max pagesize" restriction
- Fix some x16 bus-width NAND support
- Add NAND JEDEC parameter page support
- DT bindings for NAND ECC
- GPMI NAND updates (subpage reads)
- More OMAP NAND refactoring
- New STMicro SPI NOR driver (now in 40 patches!)
- A few other random bugfixes
* tag 'for-linus-
20140405' of git://git.infradead.org/linux-mtd: (120 commits)
Fix index regression in nand_read_subpage
mtd: diskonchip: mem resource name is not optional
mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
mtd: omap2: Use devm_ioremap_resource()
mtd: denali_dt: Use devm_ioremap_resource()
mtd: devices: elm: update DRIVER_NAME as "omap-elm"
mtd: devices: elm: configure parallel channels based on ecc_steps
mtd: devices: elm: clean elm_load_syndrome
mtd: devices: elm: check for hardware engine's design constraints
mtd: st_spi_fsm: Succinctly reorganise .remove()
mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
mtd: st_spi_fsm: Avoid duplicating MTD core code
mtd: st_spi_fsm: Remove useless consts from function arguments
mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
...
Chao Yu [Mon, 7 Apr 2014 03:18:34 +0000 (11:18 +0800)]
f2fs: fix wrong statistics of inline data
If we remove a file that has inline data after mount, our statistics turns to
inaccurate.
cat /sys/kernel/debug/f2fs/status
- Inline_data Inode:
4294967295
Let's add stat_inc_inline_inode() to stat inline info of the file when lookup.
Change log from v1:
o stat in f2fs_lookup() instead of in do_read_inode() for excluding wrong stat.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
ZhangZhen [Fri, 4 Apr 2014 01:47:16 +0000 (09:47 +0800)]
f2fs: check the acl's validity before setting
Before setting the acl, call posix_acl_valid() to check if it is
valid or not.
Signed-off-by: zhangzhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Wed, 2 Apr 2014 06:34:36 +0000 (15:34 +0900)]
f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.
If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.
Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Linus Torvalds [Sun, 6 Apr 2014 17:09:38 +0000 (10:09 -0700)]
Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups"
* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
nfs: pass string length to pr_notice message about readdir loops
NFSv4: Fix a use-after-free problem in open()
SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
SUNRPC: Don't let rpc_delay() clobber non-timeout errors
SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
NFSv4: Ensure we respect soft mount timeouts during trunking discovery
NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
NFS: advertise only supported callback netids
SUNRPC: remove KERN_INFO from dprintk() call sites
SUNRPC: Fix large reads on NFS/RDMA
NFS: Clean up: revert increase in READDIR RPC buffer max size
SUNRPC: Ensure that call_bind times out correctly
SUNRPC: Ensure that call_connect times out correctly
nfs: emit a fsnotify_nameremove call in sillyrename codepath
nfs: remove synchronous rename code
nfs: convert nfs_rename to use async_rename infrastructure
nfs: make nfs_async_rename non-static
nfs: abstract out code needed to complete a sillyrename
NFSv4: Clear the open state flags if the new stateid does not match
...
Linus Torvalds [Sun, 6 Apr 2014 16:38:07 +0000 (09:38 -0700)]
Merge tag 'modules-next-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing major: the stricter permissions checking for sysfs broke a
staging driver; fix included. Greg KH said he'd take the patch but
hadn't as the merge window opened, so it's included here to avoid
breaking build"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
staging: fix up speakup kobject mode
Use 'E' instead of 'X' for unsigned module taint flag.
VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
kallsyms: fix percpu vars on x86-64 with relocation.
kallsyms: generalize address range checking
module: LLVMLinux: Remove unused function warning from __param_check macro
Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
module: remove MODULE_GENERIC_TABLE
module: allow multiple calls to MODULE_DEVICE_TABLE() per module
module: use pr_cont
Yan, Zheng [Sun, 6 Apr 2014 06:10:04 +0000 (14:10 +0800)]
ceph: skip invalid dentry during dcache readdir
skip dentries that were added before MDS issued FILE_SHARED to
client.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Linus Torvalds [Sun, 6 Apr 2014 15:11:57 +0000 (08:11 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
"These fix a few stray build issues seen in linux-next, and also add
the minimal required support for perf to tilegx"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: remove unused variable 'devcap'
tile: Fix vDSO compilation issue with allyesconfig
perf tools: Allow building for tile
tile/perf: Support perf_events on tilegx and tilepro
tile: Enable NMIs on return from handle_nmi() without errors
tile: Add support for handling PMC hardware
tile: don't use __get_cpu_var() with structure-typed arguments
tile: avoid overflow in ns2cycles
Linus Torvalds [Sun, 6 Apr 2014 01:49:31 +0000 (18:49 -0700)]
Merge tag 'dm-3.15-changes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper changes from Mike Snitzer:
- Fix dm-cache corruption caused by discard_block_size > cache_block_size
- Fix a lock-inversion detected by LOCKDEP in dm-cache
- Fix a dangling bio bug in the dm-thinp target's process_deferred_bios
error path
- Fix corruption due to non-atomic transaction commit which allowed a
metadata superblock to be written before all other metadata was
successfully written -- this is common to all targets that use the
persistent-data library's transaction manager (dm-thinp, dm-cache and
dm-era).
- Various small cleanups in the DM core
- Add the dm-era target which is useful for keeping track of which
blocks were written within a user defined period of time called an
'era'. Use cases include tracking changed blocks for backup
software, and partially invalidating the contents of a cache to
restore cache coherency after rolling back a vendor snapshot.
- Improve the on-disk layout of multithreaded writes to the
dm-thin-pool by splitting the pool's deferred bio list to be a
per-thin device list and then sorting that list using an rb_tree.
The subsequent read throughput of the data written via multiple
threads improved by ~70%.
- Simplify the multipath target's handling of queuing IO by pushing
requests back to the request queue rather than queueing the IO
internally.
* tag 'dm-3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (24 commits)
dm cache: fix a lock-inversion
dm thin: sort the per thin deferred bios using an rb_tree
dm thin: use per thin device deferred bio lists
dm thin: simplify pool_is_congested
dm thin: fix dangling bio in process_deferred_bios error path
dm mpath: print more useful warnings in multipath_message()
dm-mpath: do not activate failed paths
dm mpath: remove extra nesting in map function
dm mpath: remove map_io()
dm mpath: reduce memory pressure when requeuing
dm mpath: remove process_queued_ios()
dm mpath: push back requests instead of queueing
dm table: add dm_table_run_md_queue_async
dm mpath: do not call pg_init when it is already running
dm: use RCU_INIT_POINTER instead of rcu_assign_pointer in __unbind
dm: stop using bi_private
dm: remove dm_get_mapinfo
dm: make dm_table_alloc_md_mempools static
dm: take care to copy the space map roots before locking the superblock
dm transaction manager: fix corruption due to non-atomic transaction commit
...
Linus Torvalds [Sun, 6 Apr 2014 01:46:26 +0000 (18:46 -0700)]
Merge tag 'iommu-updates-v3.15' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU upates from Joerg Roedel:
"This time a few more updates queued up.
- Rework VT-d code to support ACPI devices
- Improvements for memory and PCI hotplug support in the VT-d driver
- Device-tree support for OMAP IOMMU
- Convert OMAP IOMMU to use devm_* interfaces
- Fixed PASID support for AMD IOMMU
- Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE
IOMMU
Most of the changes are in the VT-d driver because some rework was
necessary for better hotplug and ACPI device support"
* tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits)
iommu/vt-d: Fix error handling in ANDD processing
iommu/vt-d: returning free pointer in get_domain_for_dev()
iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present
iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init()
iommu/amd: Fix logic to determine and checking max PASID
iommu/vt-d: Include ACPI devices in iommu=pt
iommu/vt-d: Finally enable translation for non-PCI devices
iommu/vt-d: Remove to_pci_dev() in intel_map_page()
iommu/vt-d: Remove pdev from intel_iommu_attach_device()
iommu/vt-d: Remove pdev from iommu_no_mapping()
iommu/vt-d: Make domain_add_dev_info() take struct device
iommu/vt-d: Make domain_remove_one_dev_info() take struct device
iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm
iommu/vt-d: Remove some pointless to_pci_dev() calls
iommu/vt-d: Make get_valid_domain_for_dev() take struct device
iommu/vt-d: Make iommu_should_identity_map() take struct device
iommu/vt-d: Handle RMRRs for non-PCI devices
iommu/vt-d: Make get_domain_for_dev() take struct device
iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device
iommu/vt-d: Make device_to_iommu() cope with non-PCI devices
...
Linus Torvalds [Sun, 6 Apr 2014 01:45:11 +0000 (18:45 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull hwmon updates from Jean Delvare:
"This includes a number of driver conversions to
devm_hwmon_device_register_with_groups, a few cleanups, and
support for the ITE IT8623E"
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (it87) Add support for IT8623E
hwmon: (it87) Fix IT8603E define name
hwmon: (lm90) Convert to use hwmon_device_register_with_groups
hwmon: (lm90) Create all sysfs groups in one call
hwmon: (lm90) Always use the dev variable in the probe function
hwmon: (lm90) Create most optional attributes with sysfs_create_group
hwmon: Avoid initializing the same field twice
hwmon: (pc87360) Avoid initializing the same field twice
hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups
hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
hwmon: (lm63) Avoid initializing the same field twice
hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
hwmon: (lm63) Create all sysfs groups in one call
hwmon: (lm63) Introduce 'dev' variable to point to client->dev
hwmon: (lm63) Add additional sysfs group for temp2_type attribute
hwmon: (
f71805f) Fix author's address
Linus Torvalds [Sun, 6 Apr 2014 01:39:18 +0000 (18:39 -0700)]
Merge tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework changes from Mike Turquette:
"The clock framework changes for 3.15 look similar to past pull
requests. Mostly clock driver updates, more Device Tree support in
the form of common functions useful across platforms and a handful of
features and fixes to the framework core"
* tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
clk: shmobile: fix setting paretn clock rate
clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1
clk: Fix minor errors in of_clk_init() function comments
clk: reverse default clk provider initialization order in of_clk_init()
clk: sirf: update copyright years to 2014
clk: mmp: try to use closer one when do round rate
clk: mmp: fix the wrong calculation formula
clk: mmp: fix wrong mask when calculate denominator
clk: st: Adds quadfs clock binding
clk: st: Adds clockgen-vcc and clockgen-mux clock binding
clk: st: Adds clockgen clock binding
clk: st: Adds divmux and prediv clock binding
clk: st: Support for A9 MUX clocks
clk: st: Support for ClockGenA9/DDR/GPU
clk: st: Support for QUADFS inside ClockGenB/C/D/E/F
clk: st: Support for VCC-mux and MUX clocks
clk: st: Support for PLLs inside ClockGenA(s)
clk: st: Support for DIVMUX and PreDiv Clocks
clk: support hardware-specific debugfs entries
clk: s2mps11: Use of_get_child_by_name
...
Linus Torvalds [Sun, 6 Apr 2014 01:32:31 +0000 (18:32 -0700)]
Merge tag 'pwm/for-3.15-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm changes from Thierry Reding:
"The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a
lot to Sascha Hauer for doing that.
Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and
Intel Low Power Subsystem.
An assortment of fixes and cleanups rounds things off for this release
cycle"
* tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: pxa: Constify OF match table
pwm: pxa: Fix typo "pwm" -> "PWM"
Revert "pwm: pxa: Use of_match_ptr()"
pwm: add support for Intel Low Power Subsystem PWM
pwm: Add CLPS711X PWM support
pwm: atmel: correct CDTY calculation
pwm: atmel: Fix polarity handling
Documentation: Add device tree bindings for Freescale FTM PWM.
pwm: Add Freescale FTM PWM driver support
pwm: pxa: Use of_match_ptr()
pwm: samsung: Use SIMPLE_DEV_PM_OPS macro
pwm: renesas-tpu: Add dependency on HAS_IOMEM
pwm: Remove obsolete HAVE_PWM Kconfig symbol
Linus Torvalds [Sat, 5 Apr 2014 22:46:37 +0000 (15:46 -0700)]
Merge tag 'tags/cleanup2-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC late cleanups from Arnd Bergmann:
"These could not be part of the first cleanup branch, because they
either came too late in the cycle, or they have dependencies on other
branches. Important changes are:
- The integrator platform is almost multiplatform capable after some
reorganization (Linus Walleij)
- Minor cleanups on Zynq (Michal Simek)
- Lots of changes for Exynos and other Samsung platforms, including
further preparations for multiplatform support and the clocks
bindings are rearranged"
* tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
devicetree: fix newly added exynos sata bindings
ARM: EXYNOS: Fix compilation error in cpuidle.c
ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h
ARM: EXYNOS: Remove hardware.h file
ARM: SAMSUNG: Remove hardware.h inclusion
ARM: S3C24XX: Remove invalid code from hardware.h
dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock
ARM: dts: Keep some essential LDOs enabled for arndale-octa board
ARM: dts: Disable MDMA1 node for arndale-octa board
ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion
serial: s3c: Fix build of header without serial_core.h preinclusion
ARM: EXYNOS: Allow wake-up using GIC interrupts
ARM: EXYNOS: Stop using legacy Samsung PM code
ARM: EXYNOS: Remove PM initcalls and useless indirection
ARM: EXYNOS: Fix abuse of CONFIG_PM
ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h
ARM: SAMSUNG: Move common save/restore helpers to separate file
ARM: SAMSUNG: Move Samsung PM debug code into separate file
ARM: SAMSUNG: Consolidate PM debug functions
ARM: SAMSUNG: Use debug_ll_addr() to get UART base address
...
Linus Torvalds [Sat, 5 Apr 2014 22:38:41 +0000 (15:38 -0700)]
Merge tag 'sh-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC sh driver change from Arnd Bergmann:
"The drivers/sh subdirectory used to get merged through the SH
architecture tree, but things are in flux there and some of the
drivers are shared with ARM shmobile, we have picked it up for the
time being.
There is only one trivial patch from Laurent Pinchart this time"
* tag 'sh-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
sh: intc: Enable driver compilation with COMPILE_TEST
Linus Torvalds [Sat, 5 Apr 2014 22:37:40 +0000 (15:37 -0700)]
Merge tag 'drivers-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Arnd Bergmann:
"These changes are mostly for ARM specific device drivers that either
don't have an upstream maintainer, or that had the maintainer ask us
to pick up the changes to avoid conflicts.
A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
shmobile), aside from that, reset controllers for STi as well as a
large rework of the Marvell Orion/EBU watchdog driver are notable"
* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
Revert "net: stmmac: Add SOCFPGA glue driver"
ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
ARM: STi: Add reset controller support to mach-sti Kconfig
drivers: reset: stih416: add softreset controller
drivers: reset: stih415: add softreset controller
drivers: reset: Reset controller driver for STiH416
drivers: reset: Reset controller driver for STiH415
drivers: reset: STi SoC system configuration reset controller support
dts: socfpga: Add sysmgr node so the gmac can use to reference
dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
reset: Add optional resets and stubs
ARM: shmobile: r7s72100: fix bus clock calculation
Power: Reset: Generalize qnap-poweroff to work on Synology devices.
dts: socfpga: Update clock entry to support multiple parents
ARM: socfpga: Update socfpga_defconfig
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
net: stmmac: Add SOCFPGA glue driver
watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
drivers: cci: Export CCI PMU revision
...
Linus Torvalds [Sat, 5 Apr 2014 22:29:04 +0000 (15:29 -0700)]
Merge tag 'dt-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree changes from Arnd Bergmann:
"A large part of the arm-soc patches are nowadays DT changes, adding
support for new SoCs, boards and devices without changing kernel
source. The plan is still to move the devicetree files out of the
kernel tree and reduce the amount of churn going on here, but we keep
finding reasons to delay doing that.
Changes are really all over the place, with little sticking out
particularly. We have contributions from a total of 116 people in
this branch.
Unfortunately, the size of this branch also causes a significant
number of conflicts at the moment, typically when subsystem
maintainers merge patches that change the driver at the same time as
the dts files. In most cases this could be avoided because the dts
changes are supposed to be compatible in both ways, and we are asking
everyone to send ARM dts changes through our tree only"
* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
dts: stmmac: Document the clocks property in the stmmac base document
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
ARM: STi: stih416: Add support for the FSM Serial Flash Controller
ARM: tegra: fix Dalmore pinctrl configuration
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
ARM: dts: Build all keystone dt blobs
ARM: dts: keystone: Fix control register range for clktsip
ARM: dts: keystone: Fix domain register range for clkfftc1
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
ARM: dts: bcm21664: Add device tree files.
ARM: DT: bcm21664: Device tree bindings
ARM: efm32: properly namespace i2c location property
ARM: efm32: fix unit address part in USART2 device nodes' names
ARM: mvebu: Enable NAND controller in Armada 385-DB
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
...
Linus Torvalds [Sat, 5 Apr 2014 21:44:13 +0000 (14:44 -0700)]
Merge tag 'boards-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC board changes from Arnd Bergmann:
"As we continue to replace board files with device tree descriptions,
this part of the ARM support is getting smaller. We have basically
just defconfig changes here this time, and a significant number of
Renesas shmobile changes, as Renesas is still in the process of
deprecating board file support"
* tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
ARM: enable fhandle in multi_v7_defconfig
ARM: tegra: enable fhandle in tegra_defconfig
ARM: update multi_v7_defconfig for Tegra
ARM: add Marvell Dove and some drivers to multi_v7 defconfig
ARM: fix duplicate symbols in multi_v5_defconfig
ARM: pxa: add gpio keys information
ARM: tegra: defconfig updates
ARM: config: keystone: enable AEMIF/NAND support
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
ARM: config: Add mvebu_v5_defconfig
ARM: config: Add a multi_v5_defconfig
ARM: shmobile: r7s72100: update defconfig for I2C usage
ARM: shmobile: Remove Lager DT reference legacy clock bits
ARM: shmobile: Remove Koelsch DT reference legacy clock bits
ARM: shmobile: Remove KZM9D board code
ARM: mvebu: update defconfigs for Armada 375 and 38x
ARM: dove: Enable watchdog support in the defconfig
ARM: mvebu: Enable watchdog support in defconfig
ARM: config: keystone: enable led support
...
Linus Torvalds [Sat, 5 Apr 2014 21:19:54 +0000 (14:19 -0700)]
Merge tag 'soc-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann:
"Lots of changes specific to one of the SoC families. Some that stick
out are:
- mach-qcom gains new features, most importantly SMP support for the
newer chips (Stephen Boyd, Rohit Vaswani)
- mvebu gains support for three new SoCs: Armada 375, 380 and 385
(Thomas Petazzoni and Free-electrons team)
- SMP support for Rockchips (Heiko Stübner)
- Lots of i.MX changes (Shawn Guo)
- Added support for BCM5301x SoC (Hauke Mehrtens)
- Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
and Sebastian Hesselbarth doing the final part of a long journey)
- Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
Bergmann)"
* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
ARM: cache-tauros2: remove ARMv6 code
ARM: mvebu: don't select CONFIG_NEON
ARM: davinci: fix DT booting with default defconfig
ARM: configs: bcm_defconfig: enable bcm590xx regulator support
ARM: davinci: remove tnetv107x support
MAINTAINERS: Update ARM STi maintainers
ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
ARM: bcm21664: Add board support.
ARM: sunxi: Add the new watchog compatibles to the reboot code
ARM: enable ARM_HAS_SG_CHAIN for multiplatform
ARM: davinci: remove da8xx_omapl_defconfig
ARM: davinci: da8xx: fix multiple watchdog device registration
ARM: davinci: add da8xx specific configs to davinci_all_defconfig
ARM: davinci: enable da8xx build concurrently with older devices
ARM: BCM5301X: workaround suppress fault
ARM: BCM5301X: add early debugging support
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
ARM: mach-bcm: Remove GENERIC_TIME
ARM: shmobile: APMU: Fix warnings due to improper printk formats
...
Linus Torvalds [Sat, 5 Apr 2014 20:51:19 +0000 (13:51 -0700)]
Merge tag 'cleanup-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These cleanup patches are mainly move stuff around and should all be
harmless. They are mainly split out so that other branches can be
based on top to avoid conflicts.
Notable changes are:
- We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
longer used (Uwe Kleine-König)
- The Qualcomm MSM platform is split out into legacy mach-msm and
new-style mach-qcom, to allow easier maintainance of the new
hardware support without regressions (Kumar Gala)
- A rework of some of the Kconfig logic to simplify multiplatform
support (Rob Herring)
- Samsung Exynos gets closer to supporting multiplatform (Sachin
Kamat and others)
- mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
- at91 gains some common clock framework support (Alexandre Belloni,
Jean-Jacques Hiblot and other French people)"
* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
ARM: hisi: select HAVE_ARM_SCU only for SMP
ARM: efm32: allow uncompress debug output
ARM: prima2: build reset code standalone
ARM: at91: add PWM clock
ARM: at91: move sam9261 SoC to common clk
ARM: at91: prepare common clk transition for sam9261 SoC
ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
ARM: at91: dt: Add at91sam9261 dt SoC support
ARM: at91: switch sam9rl to common clock framework
ARM: at91/dt: define main clk frequency of at91sam9rlek
ARM: at91/dt: define at91sam9rl clocks
ARM: at91: prepare common clk transition for sam9rl SoCs
ARM: at91: prepare sam9 dt boards transition to common clk
ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
ARM: at91: Add at91sam9rl DT SoC support
ARM: at91: prepare at91sam9rl DT transition
ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
...
Linus Torvalds [Sat, 5 Apr 2014 20:44:27 +0000 (13:44 -0700)]
Merge tag 'fixes-non-critical-3.15' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
"Lots of isolated bug fixes that were not found to be important enough
to be submitted before the merge window or backported into stable
kernels.
The vast majority of these came out of Arnd's randconfig testing and
just prevents running into build-time bugs in configurations that we
do not care about in practice"
* tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: at91: fix a typo
ARM: moxart: fix CPU selection
ARM: tegra: fix board DT pinmux setup
ARM: nspire: Fix compiler warning
IXP4xx: Fix DMA masks.
Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"
IXP4xx: Fix Goramo Multilink GPIO conversion.
Revert "ARM: ixp4xx: fix gpio rework"
ARM: tegra: make debug_ll code build for ARMv6
ARM: sunxi: fix build for THUMB2_KERNEL
ARM: exynos: add missing include of linux/module.h
ARM: exynos: fix l2x0 saved regs handling
ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
ARM: samsung: select ATAGS where necessary
ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
ARM: samsung: allow serial driver to be disabled
ARM: s5pv210: enable IDE support in MACH_TORBRECK
ARM: s5p64x0: fix building with only one soc type
ARM: s3c64xx: select power domains only when used
ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
...
Linus Torvalds [Sat, 5 Apr 2014 20:20:43 +0000 (13:20 -0700)]
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM changes from Russell King:
- Perf updates from Will Deacon:
- Support for Qualcomm Krait processors (run perf on your phone!)
- Support for Cortex-A12 (run perf stat on your FPGA!)
- Support for perf_sample_event_took, allowing us to automatically decrease
the sample rate if we can't handle the PMU interrupts quickly enough
(run perf record on your FPGA!).
- Basic uprobes support from David Long:
This patch series adds basic uprobes support to ARM. It is based on
patches developed earlier by Rabin Vincent. That approach of adding
hooks into the kprobes instruction parsing code was not well received.
This approach separates the ARM instruction parsing code in kprobes out
into a separate set of functions which can be used by both kprobes and
uprobes. Both kprobes and uprobes then provide their own semantic action
tables to process the results of the parsing.
- ARMv7M (microcontroller) updates from Uwe Kleine-König
- OMAP DMA updates (recently added Vinod's Ack even though they've been
sitting in linux-next for a few months) to reduce the reliance of
omap-dma on the code in arch/arm.
- SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan
- Support for Cortex-A12 CPU
- Align support for ARMv6 with ARMv7 so they can cooperate better in a
single zImage.
- Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support.
- Removal of IRQ_DISABLED from various ARM files
- Improved efficiency of virt_to_page() for single zImage
- Patch from Ulf Hansson to permit runtime PM callbacks to be available for
AMBA devices for suspend/resume as well.
- Finally kill asm/system.h on ARM.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits)
dmaengine: omap-dma: more consolidation of CCR register setup
dmaengine: omap-dma: move IRQ handling to omap-dma
dmaengine: omap-dma: move register read/writes into omap-dma.c
ARM: omap: dma: get rid of 'p' allocation and clean up
ARM: omap: move dma channel allocation into plat-omap code
ARM: omap: dma: get rid of errata global
ARM: omap: clean up DMA register accesses
ARM: omap: remove almost-const variables
ARM: omap: remove references to disable_irq_lch
dmaengine: omap-dma: cleanup errata 3.3 handling
dmaengine: omap-dma: provide register read/write functions
dmaengine: omap-dma: use cached CCR value when enabling DMA
dmaengine: omap-dma: move barrier to omap_dma_start_desc()
dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
dmaengine: omap-dma: consolidate clearing channel status register
dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
dmaengine: omap-dma: provide register definitions
dmaengine: omap-dma: consolidate setup of CCR
dmaengine: omap-dma: consolidate setup of CSDP
...
Linus Torvalds [Sat, 5 Apr 2014 20:19:32 +0000 (13:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rkuo/linux-hexagon-kernel
Pull Hexagon updates from Richard Kuo:
"Mostly cleanups for compilation with allmodconfig and some other
miscellaneous fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
Hexagon: update CR year for elf.h
Hexagon: remove SP macro
Hexagon: set ELF_EXEC_PAGESIZE to PAGE_SIZE
Hexagon: set the e_flags in user regset view for core dumps
Hexagon: fix atomic_set
Hexagon: add screen_info for VGA_CONSOLE
hexagon: correct type on pgd copy
smp, hexagon: kill SMP single function call interrupt
arch: hexagon: include: asm: add generic macro 'mmiowb' in "io.h"
arch: hexagon: kernel: hexagon_ksyms.c: export related symbols which various modules need
arch: hexagon: kernel: reset.c: use function pointer instead of function for pm_power_off and export it
arch: hexagon: include: asm: add "vga.h" in Kbuild
arch: hexagon: include: asm: Kbuild: add generic "serial.h" in Kbuild
arch: hexagon: include: uapi: asm: setup.h add swith macro __KERNEL__
arch: hexagon: include: asm: add prefix "hvm[ci]_" for all enum members in "hexagon_vm.h"
arch: hexagon: Kconfig: add HAVE_DMA_ATTR in Kconfig and remove "linux/dma-mapping.h" from "asm/dma-mapping.h"
arch: hexagon: kernel: add export symbol function __delay()
hexagon: include: asm: kgdb: extend DBG_MAX_REG_NUM for "cs0/1"
hexagon: kernel: kgdb: include related header for pass compiling.
hexagon: kernel: remove useless variables 'dn', 'r' and 'err' in time_init_deferred() in "time.c"
Linus Torvalds [Sat, 5 Apr 2014 20:18:52 +0000 (13:18 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68k fixes from Greg Ungerer:
"Just a couple of fixes. Clean up compile warnings by using correct
types in function args, and clean out the removed CONFIG_MTD_PARTITIONS"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix arg types for outs* functions
m68k : Kill CONFIG_MTD_PARTITIONS
Linus Torvalds [Sat, 5 Apr 2014 20:10:00 +0000 (13:10 -0700)]
Merge branch 'topic/exynos' of git://git./linux/kernel/git/mchehab/linux-media
Pull exynos media updates from Mauro Carvalho Chehab:
"These are the remaining patches I have for the merge windows. It
basically adds a new sensor and adds the needed DT bits for it to
work"
* 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5p-fimc: Remove reference to outdated macro
[media] s5p-jpeg: Fix broken indentation in jpeg-regs.h
[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver
[media] exynos4-is: Add support for asynchronous subdevices registration
[media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs
[media] exynos4-is: Use external s5k6a3 sensor driver
[media] V4L: s5c73m3: Add device tree support
[media] V4L: Add driver for s5k6a3 image sensor
[media] Documentation: devicetree: Update Samsung FIMC DT binding
[media] Documentation: dt: Add binding documentation for S5C73M3 camera
[media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
Jeff Layton [Sat, 5 Apr 2014 12:45:57 +0000 (08:45 -0400)]
nfs: pass string length to pr_notice message about readdir loops
There is no guarantee that the strings in the nfs_cache_array will be
NULL-terminated. In the event that we end up hitting a readdir loop, we
need to ensure that we pass the warning message the length of the
string.
Reported-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ron [Sat, 15 Mar 2014 17:31:07 +0000 (04:01 +1030)]
Fix index regression in nand_read_subpage
Commit
7351d3a5dbf42ba3299af71db3296be447bc1516 added an index variable
as part of fixing checkpatch warnings, presumably as a tool to make some
long lines shorter, however it only set that index in the case of there
being no gaps in eccpos for the fragment being read. Which means the
later step of filling ecccode from oob_poi will use the wrong indexing
into eccpos in that case.
This patch restores the behaviour that existed prior to that change.
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Sat, 5 Apr 2014 04:28:36 +0000 (21:28 -0700)]
Merge tag 'fbdev-main-3.15' of git://git./linux/kernel/git/tomba/linux
Pull fbdev changes from Tomi Valkeinen:
"Various fbdev fixes and improvements, but nothing big"
* tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits)
fbdev: Make the switch from generic to native driver less alarming
Video: atmel: avoid the id of fix screen info is overwritten
video: imxfb: Add DT default contrast control register property.
video: atmel_lcdfb: ensure the hardware is initialized with the correct mode
fbdev: vesafb: add dev->remove() callback
fbdev: efifb: add dev->remove() callback
video: pxa3xx-gcu: switch to devres functions
video: pxa3xx-gcu: provide an empty .open call
video: pxa3xx-gcu: pass around struct device *
video: pxa3xx-gcu: rename some symbols
sisfb: fix 1280x720 resolution support
video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info
video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove
fbdev: FB_OPENCORES should depend on HAS_DMA
OMAPDSS: convert pixel clock to common videomode style
OMAPDSS: Remove unused get_context_loss_count support
OMAPDSS: use DISPC register to detect context loss
video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro
video: imxfb: Convert to SIMPLE_DEV_PM_OPS
video: imxfb: Resolve mismatch between backlight/contrast
...
Linus Torvalds [Sat, 5 Apr 2014 04:27:43 +0000 (21:27 -0700)]
Merge tag 'ktest-v3.15' of git://git./linux/kernel/git/rostedt/linux-ktest
Pull single ktest fix from Steven Rostedt:
"This just contains a single update by Satoru Takeuchi, which adds
CLOSE_CONSOLE_SIGNAL to the kvm.conf file, as the kvm guest requires a
different signal than a normal console uses"
* tag 'ktest-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.conf
Linus Torvalds [Sat, 5 Apr 2014 04:25:28 +0000 (21:25 -0700)]
Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random
Pull /dev/random changes from Ted Ts'o:
"A number of cleanups plus support for the RDSEED instruction, which
will be showing up in Intel Broadwell CPU's"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: Add arch_has_random[_seed]()
random: If we have arch_get_random_seed*(), try it before blocking
random: Use arch_get_random_seed*() at init time and once a second
x86, random: Enable the RDSEED instruction
random: use the architectural HWRNG for the SHA's IV in extract_buf()
random: clarify bits/bytes in wakeup thresholds
random: entropy_bytes is actually bits
random: simplify accounting code
random: tighten bound on random_read_wakeup_thresh
random: forget lock in lockless accounting
random: simplify accounting logic
random: fix comment on "account"
random: simplify loop in random_read
random: fix description of get_random_bytes
random: fix comment on proc_do_uuid
random: fix typos / spelling errors in comments
Ilya Dryomov [Fri, 4 Apr 2014 14:21:32 +0000 (18:21 +0400)]
libceph: dump pool {read,write}_tier to debugfs
Dump pool {read,write}_tier to debugfs. While at it, fixup printk type
specifiers and remove the unnecessary cast to unsigned long long.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Ilya Dryomov [Wed, 2 Apr 2014 16:34:04 +0000 (20:34 +0400)]
libceph: output primary affinity values on osdmap updates
Similar to osd weights, output primary affinity values on incremental
osdmap updates.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Yan, Zheng [Tue, 1 Apr 2014 12:34:56 +0000 (20:34 +0800)]
ceph: flush cap release queue when trimming session caps
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Tue, 1 Apr 2014 12:34:18 +0000 (20:34 +0800)]
ceph: don't grabs open file reference for aborted request
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Tue, 1 Apr 2014 12:20:17 +0000 (20:20 +0800)]
ceph: drop extra open file reference in ceph_atomic_open()
ceph_atomic_open() calls ceph_open() after receiving the MDS reply.
ceph_open() grabs an extra open file reference. (The open request
already holds an open file reference)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Sat, 29 Mar 2014 05:41:15 +0000 (13:41 +0800)]
ceph: preallocate buffer for readdir reply
Preallocate buffer for readdir reply. Limit number of entries in
readdir reply according to the buffer size.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:50 +0000 (17:12 +0200)]
libceph: enable PRIMARY_AFFINITY feature bit
Announce our support for osdmaps with non-default primary affinity
values.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:49 +0000 (17:12 +0200)]
libceph: redo ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
Reimplement ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
and get rid of the now unused calc_pg_raw().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:49 +0000 (17:12 +0200)]
libceph: add support for osd primary affinity
Respond to non-default primary_affinity values accordingly. (Primary
affinity allows the admin to shift 'primary responsibility' away from
specific osds, effectively shifting around the read side of the
workload and whatever overhead is incurred by peering and writes by
virtue of being the primary).
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:48 +0000 (17:12 +0200)]
libceph: add support for primary_temp mappings
Change apply_temp() to override primary in the same way pg_temp
overrides osd set. primary_temp overrides pg_temp primary too.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:48 +0000 (17:12 +0200)]
libceph: return primary from ceph_calc_pg_acting()
In preparation for adding support for primary_temp, stop assuming
primaryness: add a primary out parameter to ceph_calc_pg_acting() and
change call sites accordingly. Primary is now specified separately
from the order of osds in the set.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:48 +0000 (17:12 +0200)]
libceph: switch ceph_calc_pg_acting() to new helpers
Switch ceph_calc_pg_acting() to new helpers: pg_to_raw_osds(),
raw_to_up_osds() and apply_temps().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:47 +0000 (17:12 +0200)]
libceph: introduce apply_temps() helper
apply_temp() helper for applying various temporary mappings (at this
point only pg_temp mappings) to the up set, therefore transforming it
into an acting set.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:47 +0000 (17:12 +0200)]
libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpers
pg_to_raw_osds() helper for computing a raw (crush) set, which can
contain non-existant and down osds.
raw_to_up_osds() helper for pruning non-existant and down osds from the
raw set, therefore transforming it into an up set, and determining up
primary.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:47 +0000 (17:12 +0200)]
libceph: ceph_can_shift_osds(pool) and pool type defines
Bring in pg_pool_t::can_shift_osds() counterpart along with pool type
defines.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Mon, 24 Mar 2014 15:12:46 +0000 (17:12 +0200)]
libceph: ceph_osd_{exists,is_up,is_down}(osd) definitions
Sync up with ceph.git definitions. Bring in ceph_osd_is_down().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:31 +0000 (19:05 +0200)]
libceph: enable OSDMAP_ENC feature bit
Announce our support for "new" (v7 - split and separately versioned
client and osd sections) osdmap enconding.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:30 +0000 (19:05 +0200)]
libceph: primary_affinity decode bits
Add two helpers to decode primary_affinity (full map, vector<u32>) and
new_primary_affinity (inc map, map<u32, u32>) and switch to them.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:30 +0000 (19:05 +0200)]
libceph: primary_affinity infrastructure
Add primary_affinity infrastructure. primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.
Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:30 +0000 (19:05 +0200)]
libceph: primary_temp decode bits
Add a common helper to decode both primary_temp (full map, map<pg_t,
u32>) and new_primary_temp (inc map, same) and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:29 +0000 (19:05 +0200)]
libceph: primary_temp infrastructure
Add primary_temp mappings infrastructure. struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.
Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:
primary_temp 2.6 4
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:29 +0000 (19:05 +0200)]
libceph: generalize ceph_pg_mapping
In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:29 +0000 (19:05 +0200)]
libceph: introduce get_osdmap_client_data_v()
Full and incremental osdmaps are structured identically and have
identical headers. Add a helper to decode both "old" (16-bit version,
v6) and "new" (8-bit struct_v+struct_compat+struct_len, v7) osdmap
enconding headers and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:28 +0000 (19:05 +0200)]
libceph: introduce decode{,_new}_pg_temp() and switch to them
Consolidate pg_temp (full map, map<pg_t, vector<u32>>) and new_pg_temp
(inc map, same) decoding logic into a common helper and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:28 +0000 (19:05 +0200)]
libceph: switch osdmap_set_max_osd() to krealloc()
Use krealloc() instead of rolling our own. (krealloc() with a NULL
first argument acts as a kmalloc()). Properly initalize the new array
elements. This is needed to make future additions to osdmap easier.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:27 +0000 (19:05 +0200)]
libceph: introduce decode{,_new}_pools() and switch to them
Consolidate pools (full map, map<u64, pg_pool_t>) and new_pools (inc
map, same) decoding logic into a common helper and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Fri, 21 Mar 2014 17:05:27 +0000 (19:05 +0200)]
libceph: rename __decode_pool{,_names}() to decode_pool{,_names}()
To be in line with all the other osdmap decode helpers.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:16 +0000 (16:36 +0200)]
libceph: fix and clarify ceph_decode_need() sizes
Sum up sizeof(...) results instead of (incorrectly) hard-coding the
number of bytes, expressed in ints and longs.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:16 +0000 (16:36 +0200)]
libceph: nuke bogus encoding version check in osdmap_apply_incremental()
Only version 6 of osdmap encoding is supported, anything other than
version 6 results in an error and halts the decoding process. Checking
if version is >= 5 is therefore bogus.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:15 +0000 (16:36 +0200)]
libceph: fixup error handling in osdmap_apply_incremental()
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Follow osdmap_decode() and fix this by adding
a special e_inval label to be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:15 +0000 (16:36 +0200)]
libceph: fix crush_decode() call site in osdmap_decode()
The size of the memory area feeded to crush_decode() should be limited
not only by osdmap end, but also by the crush map length. Also, drop
unnecessary dout() (dout() in crush_decode() conveys the same info) and
step past crush map only if it is decoded successfully.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:14 +0000 (16:36 +0200)]
libceph: check length of osdmap osd arrays
Check length of osd_state, osd_weight and osd_addr arrays. They
should all have exactly max_osd elements after the call to
osdmap_set_max_osd().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:14 +0000 (16:36 +0200)]
libceph: safely decode max_osd value in osdmap_decode()
max_osd value is not covered by any ceph_decode_need(). Use a safe
version of ceph_decode_* macro to decode it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:14 +0000 (16:36 +0200)]
libceph: fixup error handling in osdmap_decode()
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Fix this by adding a special e_inval label to
be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:13 +0000 (16:36 +0200)]
libceph: split osdmap allocation and decode steps
Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:13 +0000 (16:36 +0200)]
libceph: dump osdmap and enhance output on decode errors
Dump osdmap in hex on both full and incremental decode errors, to make
it easier to match the contents with error offset. dout() map epoch
and max_osd value on success.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:13 +0000 (16:36 +0200)]
libceph: dump pg_temp mappings to debugfs
Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g:
pg_temp 2.6 [2,3,4]
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:12 +0000 (16:36 +0200)]
libceph: do not prefix osd lines with \t in debugfs output
To save screen space in anticipation of more fields (e.g. primary
affinity).
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Thu, 13 Mar 2014 14:36:12 +0000 (16:36 +0200)]
libceph: refer to osdmap directly in osdmap_show()
To make it more readable and save screen space.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Ilya Dryomov [Wed, 19 Mar 2014 14:58:37 +0000 (16:58 +0200)]
crush: support chooseleaf_vary_r tunable (tunables3) by default
Add TUNABLES3 feature (chooseleaf_vary_r tunable) to a set of features
supported by default.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Ilya Dryomov [Wed, 19 Mar 2014 14:58:37 +0000 (16:58 +0200)]
crush: add SET_CHOOSELEAF_VARY_R step
This lets you adjust the vary_r tunable on a per-rule basis.
Reflects ceph.git commit
f944ccc20aee60a7d8da7e405ec75ad1cd449fac.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Ilya Dryomov [Wed, 19 Mar 2014 14:58:37 +0000 (16:58 +0200)]
crush: add chooseleaf_vary_r tunable
The current crush_choose_firstn code will re-use the same 'r' value for
the recursive call. That means that if we are hitting a collision or
rejection for some reason (say, an OSD that is marked out) and need to
retry, we will keep making the same (bad) choice in that recursive
selection.
Introduce a tunable that fixes that behavior by incorporating the parent
'r' value into the recursive starting point, so that a different path
will be taken in subsequent placement attempts.
Note that this was done from the get-go for the new crush_choose_indep
algorithm.
This was exposed by a user who was seeing PGs stuck in active+remapped
after reweight-by-utilization because the up set mapped to a single OSD.
Reflects ceph.git commit
a8e6c9fbf88bad056dd05d3eb790e98a5e43451a.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Ilya Dryomov [Wed, 19 Mar 2014 14:58:37 +0000 (16:58 +0200)]
crush: allow crush rules to set (re)tries counts to 0
These two fields are misnomers; they are *retry* counts.
Reflects ceph.git commit
f17caba8ae0cad7b6f8f35e53e5f73b444696835.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Ilya Dryomov [Wed, 19 Mar 2014 14:58:36 +0000 (16:58 +0200)]
crush: fix off-by-one errors in total_tries refactor
Back in
27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH
code to allow adjustment of the retry counts on a per-pool basis. That
commit had an off-by-one bug: the previous "tries" counter was a *retry*
count, not a *try* count, but the new code was passing in 1 meaning
there should be no retries.
Fix the ftotal vs tries comparison to use < instead of <= to fix the
problem. Note that the original code used <= here, which means the
global "choose_total_tries" tunable is actually counting retries.
Compensate for that by adding 1 in crush_do_rule when we pull the tunable
into the local variable.
This was noticed looking at output from a user provided osdmap.
Unfortunately the map doesn't illustrate the change in mapping behavior
and I haven't managed to construct one yet that does. Inspection of the
crush debug output now aligns with prior versions, though.
Reflects ceph.git commit
795704fd615f0b008dcc81aa088a859b2d075138.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Yan, Zheng [Mon, 24 Mar 2014 11:15:05 +0000 (19:15 +0800)]
ceph: don't include ceph.{file,dir}.layout vxattr in listxattr()
This avoids 'cp -a' modifying layout of new files/directories.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Mon, 24 Mar 2014 05:00:54 +0000 (13:00 +0800)]
ceph: check buffer size in ceph_vxattrcb_layout()
If buffer size is zero, return the size of layout vxattr. If buffer
size is not zero, check if it is large enough for layout vxattr.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Mon, 24 Mar 2014 01:56:43 +0000 (09:56 +0800)]
ceph: fix null pointer dereference in discard_cap_releases()
send_mds_reconnect() may call discard_cap_releases() after all
release messages have been dropped by cleanup_cap_releases()
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Yan, Zheng [Sat, 22 Mar 2014 22:50:39 +0000 (06:50 +0800)]
libceph: fix oops in ceph_msg_data_{pages,pagelist}_advance()
When there is no more data, ceph_msg_data_{pages,pagelist}_advance()
should not move on to the next page.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Fabian Frederick [Fri, 21 Mar 2014 16:52:58 +0000 (09:52 -0700)]
ceph: Remove get/set acl on symlinks
Remove unsupported symlink operations.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Yan, Zheng [Tue, 18 Mar 2014 02:15:29 +0000 (10:15 +0800)]
ceph: set mds_wanted when MDS reply changes a cap to auth cap
When adjusting caps client wants, MDS does not record caps that are
not allowed. For non-auth MDS, it does not record WR caps. So when
a MDS reply changes a non-auth cap to auth cap, client needs to set
cap's mds_wanted according to the reply.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Sun, 9 Mar 2014 15:16:40 +0000 (23:16 +0800)]
ceph: use fl->fl_file as owner identifier of flock and posix lock
flock and posix lock should use fl->fl_file instead of process ID
as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner
is usually equal to fl->fl_file, but it also can be a customized
value). The process ID of who holds the lock is just for F_GETLK
fcntl(2).
The fix is rename the 'pid' fields of struct ceph_mds_request_args
and struct ceph_filelock to 'owner', rename 'pid_namespace' fields
to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages.
We also set the most significant bit of the 'owner' field. MDS can
use that bit to distinguish between old and new clients.
The MDS counterpart of this patch modifies the flock code to not
take the 'pid_namespace' into consideration when checking conflict
locks.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Yan, Zheng [Tue, 4 Mar 2014 07:50:06 +0000 (15:50 +0800)]
ceph: forbid mandatory file lock
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Tue, 4 Mar 2014 07:42:24 +0000 (15:42 +0800)]
ceph: use fl->fl_type to decide flock operation
VFS does not directly pass flock's operation code to filesystem's
flock callback. It translates the operation code to the form how
posix lock's parameters are presented.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Yan, Zheng [Sat, 8 Mar 2014 12:12:23 +0000 (20:12 +0800)]
ceph: update i_max_size even if inode version does not change
handle following sequence of events:
- client releases a inode with i_max_size > 0. The release message
is queued. (is not sent to the auth MDS)
- a 'lookup' request reply from non-auth MDS returns the same inode.
- client opens the inode in write mode. The version of inode trace
in 'open' request reply is equal to the cached inode's version.
- client requests new max size. The MDS ignores the request because
it does not affect client's write range
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Yan, Zheng [Sat, 8 Mar 2014 01:51:45 +0000 (09:51 +0800)]
ceph: make sure write caps are registered with auth MDS
Only auth MDS can issue write caps to clients, so don't consider
write caps registered with non-auth MDS as valid.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Richard Kuo [Thu, 2 Jan 2014 23:17:17 +0000 (17:17 -0600)]
Hexagon: update CR year for elf.h
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Richard Kuo [Mon, 30 Dec 2013 20:21:12 +0000 (14:21 -0600)]
Hexagon: remove SP macro
The SP/r29 macro wasn't used anywhere else and was causing conflicts
with another module, so just remove it.
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Richard Kuo [Mon, 12 Aug 2013 18:13:00 +0000 (13:13 -0500)]
Hexagon: set ELF_EXEC_PAGESIZE to PAGE_SIZE
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Richard Kuo [Fri, 18 Oct 2013 00:41:44 +0000 (19:41 -0500)]
Hexagon: set the e_flags in user regset view for core dumps
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Richard Kuo [Mon, 25 Nov 2013 19:49:26 +0000 (13:49 -0600)]
Hexagon: fix atomic_set
Normal writes in our our architecture don't invalidate lock
reservations.
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Richard Kuo [Fri, 6 Dec 2013 22:45:25 +0000 (16:45 -0600)]
Hexagon: add screen_info for VGA_CONSOLE
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Ilia Mirkin [Fri, 6 Dec 2013 02:13:25 +0000 (21:13 -0500)]
hexagon: correct type on pgd copy
swapper_pg_dir is an array of pgd_t, not pgd_t*. This has no actual
effect since sizeof(pgd_t) == sizeof(pgd_t*), but unconfuses tools that
check types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Jiang Liu [Wed, 4 Dec 2013 16:12:58 +0000 (00:12 +0800)]
smp, hexagon: kill SMP single function call interrupt
Commit
9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one intterupt
is needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Chen Gang [Tue, 26 Nov 2013 04:07:40 +0000 (12:07 +0800)]
arch: hexagon: include: asm: add generic macro 'mmiowb' in "io.h"
Need dumy mmiowb(), or can not pass compiling, the related error with
allmodconfig:
CC [M] drivers/mmc/host/sdhci.o
drivers/mmc/host/sdhci.c: In function 'sdhci_request':
drivers/mmc/host/sdhci.c:1409:2: error: implicit declaration of function 'mmiowb' [-Werror=implicit-function-declaration]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Chen Gang [Tue, 3 Dec 2013 12:26:46 +0000 (20:26 +0800)]
arch: hexagon: kernel: hexagon_ksyms.c: export related symbols which various modules need
Need export all related functions and symbols for various modules with
allmodconfig. The related errors:
MODPOST 2879 modules
ERROR: "__vmyield" [sound/sound_firmware.ko] undefined!
ERROR: "__phys_offset" [sound/drivers/snd-dummy.ko] undefined!
ERROR: "ioremap_nocache" [drivers/char/ipmi/ipmi_si.ko] undefined!
ERROR: "__iounmap" [drivers/char/ipmi/ipmi_si.ko] undefined!
...
For including files, need "linux/*" first, then "asm/*". All related
included files and symbols need be sorted by alphabetical order.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Chen Gang [Fri, 29 Nov 2013 04:01:37 +0000 (12:01 +0800)]
arch: hexagon: kernel: reset.c: use function pointer instead of function for pm_power_off and export it
'pm_power_off' is a function pointer, not a function, so need change
its type, and also need export it, or can not pass compiling with
allmodconfig. The related error:
MODPOST 2879 modules
ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined!
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>