Staging: batman: fix debug Kconfig option

The debug batman option needs to depend on the correct
config option.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed

Here I've kept the selection of IIO_SW_RING separate from
IIO_TRIGGER as it will go away fairly shortly when the ring buffer
type becomes configurable on a per device basis, whereas the
IIO_TRIGGER select will remain. Whether to retain the option to
remove the support for ring buffers entirely is one for after that
support is in place.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: Add tsl2560-2 support to tsl2563 driver.

Minimal changes to driver. Just adds the device to the id
table and adjusts the Kconfig elements appropriately.

Adding further similar chips from TAOS is complicated by their
different conversion functions (and hence left for now).

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563.

This patch simply removes the tsl2561 driver.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Amit Kucheria <amit.kucheria@verdurent.com>

Staging: wlags49_h2: fix up signal levels

Adjusts the signal levels reported by the wlags49_h2 and wlags49_h25 staging
drivers. With the constants supplied by Agere the signal levels are always
poor, even in close proximity to the AP. The signals are now measured with
a real device. 100% for close proximity to the AP, 0% for the noice floor.
Now the levels shown by the NetworkManager gauge make sense.

Some magic numbers in the related code are replaced by the correct constants
from the wireless extension interface (wireless.h). Also the flag IW_QUAL_DBM
is now set, as specified in the wireless.h header file.

Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

+ drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree

Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: add TODO file

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: remove old kernel code

Don't test for the kernel version, we know what version we are in,
the latest.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add Samsung Laptop driver

This is a drive for the Samsung N128 laptop to control the wireless LED
and backlight.

Many thanks to Joey Lee for his help in testing and finding all of my
bugs in the development of this driver, it has been invaluable.

Cc: Joey Lee <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: batman-adv meshing protocol

B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.

This is the first submission for inclusion in staging.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: depends on USB

rtl8192u uses usb_* interfaces so it should depend on USB.

ERROR: "usb_kill_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_deregister" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_control_msg" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_submit_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_register_driver" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_free_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: remove dead code

Remove #ifse against older kernel versions;
Remove codes marked with #if 0;
Remove #if 1

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: remove bad whitespaces

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: make it compile

Add it to staging Kbuild and fixes some API differences that prevents
compilation.

It seems that the ieee80211 stack is very close to rtl8192su one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Added Realtek rtl8192u driver to staging

Add Realtek linux driver for rtl8192u as provided by Realtek

rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML.

This version won't compile against upstream, doesn't follow
Linux CodingStyle and has their own ieee80211 stack.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: add gpio and pmem support

This adds generic_gpio and pmem support, both are needed for other
dream drivers.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: add TODO file

This adds TODO list. It is probably incomplete, as many parts were not
reviewed by the upstream maintainers, yet.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: delete android drivers

These drivers are no longer being developed and the original authors
seem to have abandonded them and hence, do not want them in the mainline
kernel tree.

So sad :(

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: clean up the avail fields in the rx registers

These have a wrap bit but again need little work to clean out. There are a
couple of uglies left that want addressing in later clean up. Notably we should
probably keep the local psr copy and wrap as two values.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: Clean up number fields

Lots of RX typedefs are just low bits of a u32, so clean them all up in one
go and just work them directly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: kill RX_DMA_MAX_PKT_TIME

Another one bits the dust ...

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: kill TX_SHADOW

Guess what - we don't use this one either

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: Another typedef solely used to write 0 to a register

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: kill TX_PR_NUM_DES_t

Yes folks it another unused typedef.. This completes the clean up of the
TX DMA typedefs

Signed-off-by: Alan Cox <alan@linux.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: kill TxMacTest field

It's really a local in the interrupt handler

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: kill TXTEST and TXFILL, clean up CF_PARAM

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: clean up mac stat names

Might as well use something short and obvious

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: clean up MAC_STAT register

One by one...

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: Kill MAC_IF_CTRL typedefs

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Rename staging driver to avoid name conflict with mainline driver

Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.

To solve the conflict, rename the driver in staging to r8187se.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Remove card_type

The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Remove card8185 variable to simplify flow

When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: fix assorted typos all over the place

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: dst: fix coding style

Signed-off-by: Mariusz Ziulek <mz.mzet@gmail.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: usbip: Fix typo "Contoroller".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove no longer needed common/cmm_data_2860.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: reduce superfluous exclamation marks

This removes superfluous exclamation marks from strings and comments, and
also three spelling typos.

Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix comments in chip/mac_pci.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: tsl2563 ambient light sensor driver

Add driver support for the tsl2563 TAOS ambient light sensor. After looking at
discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio'
driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it
responds to changing light conditions.

The only real reason for submitting this to staging is that it is dependent on
the IIO subsystem.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: Fix typos in documentation

Spell-check wouln't catch these :)

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: fix 2 warnings

Fix printk format warning:
drivers/staging/sep/sep_driver.c:276: warning: format '%08llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t'

and variable may be used uninitialized (correct):
drivers/staging/sep/sep_driver.c:1774: warning: 'error' may be used uninitialized in this function

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt665*: fix printk formats

Fix printk format warnings in vt665[56]:

drivers/staging/vt6655/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6655/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'

drivers/staging/vt6656/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/firmware.c:804: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: fix ring buffer build

max1363 uses both the iio hardware ring buffer and software
ring buffer interfaces, but its Makefile and Kconfig do not
reflect that usage, so its build breaks.  Add a new Kconfig
symbol to reflect that usage and change max1363.h & Makefile
to use the new Kconfig symbol.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>

Staging: RTL8192SU depends on USB

USB device driver needs to depend on USB to prevent build errors:

ERROR: "usb_kill_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_deregister" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_control_msg" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_submit_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_register_driver" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_free_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dst: Fix parentheses

`|' has a higher precedence than `?' so since MSG_WAITALL is
defined 0x100, MSG_MORE was always written to the msg_flag.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: Fix mutex locking

Fix incorrect use of mutex_trylock().

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Rename VME DMA functions

The DMA resource allocation function is called "vme_request_dma" while
master and slave window allocation functions are called
"vme_master_request" and "vme_slave_request" respectively. Rename
"vme_request_dma" to "vme_dma_request" to fit the pattern.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Clean up tsi148 driver

* Remove message from IACK interrupt handler
* Correct clearing of location monitor interrupts
* Remove interrupt cleanup code that's duplcated in sub function

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Correct operation of vme_lm_free

The vme_lm_free() function is not clearing up the resource created in
vme_lm_request(). In addition vme_lm_free() is void function and is used in
exit/error paths, we should wait for mutex to become free rather than
exiting and not freeing the resource.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Allow size of 0 when disabling a window

The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: fix compiler warnings in vme_ca91cx42.c

It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.

Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Pull common VME interrupt handling into core code

Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: correct array overflow

Eric Sesterhenn noticed that vme_user is overflowing an array used by
sprintf. Use a bigger array.

CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: remove unused #include <linux/version.h>

Remove unused #include <linux/version.h>('s) in
  drivers/staging/vme/bridges/vme_ca91cx42.c
  drivers/staging/vme/bridges/vme_tsi148.c
  drivers/staging/vme/devices/vme_user.c
  drivers/staging/vme/vme.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove __cplusplus ifdefs

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656 remove unneeded version.h and version check

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655 remove unneeded version.h

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656 remove duplicate includes

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655 remove duplicate includes

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656 remove kcompat.h

The vt6656 driver is integrated in the kernel so it no longer needs the
compatibility header.

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655 remove kcompat.h

The vt6655 driver is integrated in the kernel so it no longer needs the
compatibility header.

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Correct unsigned bound issue

uNodeIndex is unsigned, check whether it is within bounds instead.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: use lowercase for VIA USB vendor id

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: octeon: don't ignore request_irq() return code

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove superfluous newlines

This patch is based on next-20091106.
This tiny patch removes a few quite unnecessary extra newlines from
DBGPRINT() and printk() strings.

Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: remove remainders of /etc reading stuff

The stuff that tries to read a file from /etc is already removed, so
this patch just removes the last remainders.

Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Staging: rt28x0: Add proper selection of WIRELESS_EXT and WEXT_PRIV

After the incorporation of the patch entitled "wext: refactor", some
of the wireless drivers in drivers/staging fail to build because they
need to have CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV defined.

[ patch description borrowed from the previous fix for wireless staging
  drivers ("staging: Add proper selection of WIRELESS_EXT and WEXT_PRIV")
  authored by Larry Finger ]

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove typedefs (part three)

Remove misc typedefs.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove typedefs (part two)

Remove typedefs from rt_linux.h and rtmp_usb.h.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove typedefs (part one)

Remove typedefs from rtmp_type.h.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix comments in *.h files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix comments in sta/*.c files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix comments in common/*.c files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix comments in *.c files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: run *.h files through Lindent

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: run sta/*.c files through Lindent

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: run common/*.c files through Lindent

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: run *.c files through Lindent

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove __LINE__ instances

Remove instances of __LINE__ preprocessor directive to make
validation of resulting binary output files easier.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove unused SHA256 code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove dead code from rtmp_phy.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove optional cmm profile parameters

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix some build warnings

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove support for private driver parameters

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove private WEXT handlers

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove unused code from common/ee_efuse-c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: remove unused ->eewrite methods

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus : checkpatch.pl cleanup for some more .c files

Second lot of checkpatch.pl error and warning fixes for .c files of
otus driver in staging tree.
(Externs would be removed in a seperate patch)

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus : checkpatch.pl cleanup for .c files

First patch for checkpatch.pl error and warning fixes for .c files of otus
driver in staging tree.

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus : checkpatch.pl cleanup for header files

Fix for checkpatch.pl errors and warnings in header files of otus driver.
(There is a typedef which still remains. Plan to clean it up in next set
of patches)

Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: remove wakelock support from smd_rpcrouter.h

wakelocks are power optimalization, not supported in mainline. Remove
them so that code compiles on mainline.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: remove wakelock support

Includes changed so that <linux/sched.h> is now needed for
TASK_INTERRUPTIBLE and friends, so include it.

Remove hooks for features not in mainline, such as earlysuspend and
wakelocks.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: Synaptics touchscreen for HTC Dream: check that smbus is available

Check that SMBUS APIs are available in touchscreen driver.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Trilok Soni <soni.trilok@gmail.com>
Cc: <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: mark as BROKEN

It doesn't build, and hasn't for a long time (if ever).  So mark
it BROKEN for now.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: make it independant from CONFIG_ANDROID

Make Dream support independent of CONFIG_ANDROID.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

Staging: wlags49: fix kconfigs dependancy

Fix depends/selects in wlags49 drivers.

ERROR: "wireless_spy_update" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "iw_handler_get_spy" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "iw_handler_set_spy" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!

ERROR: "pcmcia_dev_present" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_request_irq" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_register_driver" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_request_configuration" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_request_io" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_error_ret" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_error_func" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_unregister_driver" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_disable_device" [drivers/staging/wlags49_h25/wlags49_h25_cs.ko] undefined!
ERROR: "pcmcia_dev_present" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_request_irq" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_register_driver" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_request_configuration" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_request_io" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_error_ret" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_error_func" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_unregister_driver" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!
ERROR: "pcmcia_disable_device" [drivers/staging/wlags49_h2/wlags49_h2_cs.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>