[media] drxd_hard: fix compiler warnings

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mantis: fix compiler warnings

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] az6027: fix compiler warnings

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvaudio: fix compiler warnings

This is indeed a bug: balance and volume must be used to set the left and right
channel volume. Fixed.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9005-fe: fix compiler warning

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mxl5005s: fix compiler warning

Removed the unused Xtal_Int variable. That made it also possible to remove a
related function. However, the code of that function has been preserved in a
comment describing an equation. Without that function that comment would
have been hard to understand.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ddbridge: fix compiler warnings

'off' was unused and 'ret' really had to be used to return -EFAULT.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7146: fix compiler warning

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] wl128x: fix compiler warning + wrong write() return

The fix is to check for ret and return -EFAULT if non-zero.

I also noticed that write() didn't return the number of bytes written.
Fixed as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt20xx.c: fix compiler warnings

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713.c: fix compiler warning

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb: refactor MFE code for individual streaming config per frontend

refactor MFE code to allow for individual streaming configuration
for each frontend

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb: add ATSC support for the Hauppauge WinTV-Aero-M

Adds new driver, mxl111sf, to support the WinTV-Aero-M

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drxd: fix divide error

Fix division by zero in drxd triggered by running "femon" before any DVB
tuning has been done (by "scandvb" or anything else).

Signed-off-by: Edward Sheldrake <ejsheldrake@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Use current logging styles

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Remove now unused old usb style logging macros.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: check function pointers on reinitialize

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] t613: Use current logging styles

Add pr_fmt.
Convert usb style logging macros to pr_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] sn9c20x: Use current logging styles

Add pr_fmt.
Convert usb style logging macros to pr_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pac207: Use current logging styles

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Coalesce formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] finepix: Use current logging styles

Add pr_fmt.
Convert usb style logging macros to pr_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] m5602: Use current logging styles

Add pr_fmt and convert usb style logging macro uses to pr_<level>.
Coalesce format strings.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gl860: Use current logging styles

Add pr_fmt.
Convert err macro use to pr_err.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] et61x251: Use current logging styles

Add pr_fmt and convert printks to pr_<level>
Remove explicit prefixes from logging messages.
One of the prefixes was defective, a copy/paste error.
Use ##__VA_ARGS__ for variadic macros.
Whitespace neatening.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] bt8xx: Use current logging styles

This converts some messages that were emitted at
KERN_INFO to KERN_DEBUG.  All of these messages
were guarded by bttv_debug tests.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.
Use ##__VA_ARGS__ for variadic macro as well.
Coalesce format strings.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] winbond-cir: Use current logging styles

Add pr_fmt, convert printks to pr_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ene_ir: Use current logging styles

Add pr_fmt.
Convert ene_warn and ene_notice to pr_<level>.
Use pr_debug in __dbg macro and a little neatening.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc-core.h: Surround macro with do {} while (0)

Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.

Use ##__VA_ARGS__ for variadic macro as well.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7146: Use current logging styles

Standardize the mechanisms to emit logging messages.

A few other modules used an #include from saa7146,
convert those at the same time.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Convert logging macros requiring multiple parentheses to normal style.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Use printf extension %pM to print mac address.
Coalesce format strings.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Michael Hunold <michael@mihu.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: don't sleep on disconnect

The DVB framework will try to power-down an adapter that no-one is using
any more, but this assumes that the adapter is still connected to the
machine. That's not always true for a USB adapter, so disable the sleep
operations when the adapter has been physically unplugged.

This prevents I2C write failures with error -19 from appearing
occasionally in the dmesg log.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: move printk lines outside mutex lock

There's no reason to still be holding the device list mutex for either of these
printk statements.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: clean up resources should init fail

This patch ensures that the em28xx_init_dev() function cleans up after itself,
in the event that it fails. This isimportant because the struct em28xx will be
deallocated if em28xx_init_dev() returns an error.

[mchehab@redhat.com: Fix merge conflicts and simplify the goto labels]
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: use atomic bit operations for devices-in-use mask

Use atomic bit operations for the em28xx_devused mask, to prevent an
unlikely race condition should two adapters be plugged in
simultaneously. The operations also clearer than explicit bit
manipulation anyway.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: pass correct buffer size to snprintf

snprintf()'s size parameter includes space for the terminating '\0' character.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: increment minor version after addition of SYS_TURBO

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: remove static assignments from dtv_property_cache_sync()

  dtv_property_cache_init().
  dtv_property_process_get().
  overwritten with invalid values, leading to partially incorrect
  results when calling FE_GET_PROPERTY.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media: do not use EXTRA_CFLAGS

Usage of these flags has been deprecated for nearly 4 years by:

    commit f77bf01425b11947eeb3b5b54685212c302741b8
    Author: Sam Ravnborg <sam@neptun.(none)>
    Date:   Mon Oct 15 22:25:06 2007 +0200

        kbuild: introduce ccflags-y, asflags-y and ldflags-y

Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command
line use. By default, gmake(1) do not override command line setting, so this is
likely to result in build failure or unexpected behavior.

Replace their usage by Kbuild's `{as,cc,ld}flags-y'.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add missing OK key to PCTV IR keymap

Hi,

The following patch adds the IR code for the missing "OK" key to the Pinnacle
PCTV HD map. This map is now used by the PCTV 290e DVB-T2 device, whose remote
control has 26 buttons.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/video/zr364xx.c: add missing cleanup code

It seems just as necessary to free cam->vdev and cam in this error case as
in the next one.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: add entries for s5p-mfc and s5p-tv drivers

Both driver has been merged to v3.1-rc1, so add its authors as maintainers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ddbridge: fix ddb_ioctl()

There were a several problems in this function:

1) Potential integer overflow in the comparison:
if (fio.write_len + fio.read_len > 1028) {

2) If the user gave bogus values for write_len and read_len then
   returning -EINVAL is more appropriate than returning -ENOMEM.

3) wbuf was set to the address of an array and could never be NULL
   so I removed the pointless NULL check.

4) The call to vfree(wbuf) was improper.  That array is part of a
   larger struct and isn't allocated by itself.

5) flashio() can't actually fail, but we may as well add error
   handling in case this changes later.

6) In the default case where an ioctl is not implemented then
   returning -ENOTTY is more appropriate than returning -EFAULT.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] CXD2820R: Replace i2c message translation with repeater gate control

This patch implements an i2c_gate_ctrl op for the cxd2820r. Thanks to Robert
Schlabbach for identifying the register address and field to set.

The old i2c intercept code that prefixed messages with a passthrough byte has
been removed and the PCTV nanoStick T2 290e entry in em28xx-dvb has been
updated appropriately.

Tested for DVB-T2 use; I would appreciate it if somebody with DVB-C capabilities
could test it as well - from inspection I cannot see any problems.

This is patch v2. It fixes some schoolboy style errors and removes superfluous
i2c entries in cxd2820r.h.

Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: Change API version in documentation: 3 -> 5.4

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: improve documentation for satellite delivery systems

- Move voltage and tone to DVB-S.
- Add turbo code.
- In DVB-S2 and turbo code sections, refer to DVB-S, as both
  are extensions to DVB-S.
- Add modulation to DVB-S2.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: gp8psk-fe: use SYS_TURBO

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: Fix compatibility criteria for satellite receivers

  identify a satellite receiver by its 'delivery_system' instead of
  'modulation', which may overlap between different delivery systems.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: Add SYS_TURBO for north american turbo code FEC

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib9000: return error code on failure

The ret = -EIO needs to be before the goto.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7000p: return error code on allocation failure

The goto needs to be moved after the assignment.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-core, tda18271c2dd: define get_if_frequency() callback

Tuners in general convert a high frequency carrier into an Intermediate
Frequency (IF).

Digital tuners like tda18271, xc3028, etc. generally allow changing the IF
frequency, although they generally have recommented settings for the IF.
Analog tuners, have a fixed IF frequency, that depends on the physical
characteristics of some analog components.

For digital tuners, it makes sense to have ways to configure IF,
via the tuner's configuration structure, like what's done inside the
tda18271-fe maps.

The demods need to know what IF is used by the tuner, as it will need
to convert internally from IF into baseband. Currently, the bridge driver
needs to fill a per-demod configuration struct for it, or pass it via
a dvb_attach parameter.

The tda18271 datasheet recommends to use different IF's for different
delivery system types and for different bandwidths.

The DRX-K demod also needs to know the IF frequency in order to work,
just like all other demods. However, as it accepts different delivery
systems (DVB-C and DVB-T), the IF may change if the standard and/or
bandwidth is changed.

So, the usual procedure of passing it via a config struct doesn't work.

One might try to code it as two separate IF frequencies, or even as a
table in function of the delivery system and the bandwidth, but this
will be messy.

So, it is better and simpler to just add a new callback for it and
require the tuners that can be used with MFE frontends like drx-k
to implement a new callback to return the used IF.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Antti Palosaari <crope@iki.fi>

[media] em28xx: add em28xx_ prefix to functions

Makes it more straight-forward to follow stack traces if the functions
don't have generic names. Using this as a crutch while trying to better
understand the lockdep warnings I get when loading the em28xx driver.

CC: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] redrat3: remove unused dev struct members

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videobuf2: Do not unconditionally map S/G buffers into kernel space

The one in-tree videobuf2-dma-sg driver (mmp-camera) has no need for a
kernel-space mapping of the buffers; one suspects that most other drivers
would not either.  The videobuf2-dma-sg module does the right thing if
buf->vaddr == NULL - it maps the buffer on demand if somebody needs it.  So
let's not map the buffer at allocation time; that will save a little CPU
time and a lot of address space in the vmalloc range.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: update locking in dvb_frontend_{add, get_event}

  - fepriv->parameters_out isn't protected by events->mtx, so
    move the call to fe->ops.get_frontend out of the locked area.
  - move the assignment of e->status into the locked area.

  - use direct assignment instead of memcpy.

  - use mutex_lock instead of mutex_lock_interruptible, because
    all code paths protected by this mutex won't block.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: clear stale events on FE_SET_FRONTEND

  the first event after an attempt to tune.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: avoid possible race condition on first event

  enqueued before the frontend thread wakes up.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: dvb_frontend: fix stale parameters on initial frontend event

  Modify it to use the data given by the user.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/video/hexium_gemini.c: delete useless initialization

Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.

The semantic match that makes this change is as follows:

// <smpl>
@@
type T;
identifier i;
expression e;
@@

(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);

// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Don't try to use a non-existing interface

> [34883.426065] tm6000 #0: registered device video0
> [34883.430591] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
> [34883.437763] usbcore: registered new interface driver tm6000
> [34884.608372] BUG: unable to handle kernel NULL pointer dereference at 00000002
> [34884.615514] IP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000]

The dev->int_in USB interfaces is used by some devices for the
Remote Controller. Not all devices seem to define this interface,
so, tm6000_reset should not try to set the interface to it on
such devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Enable radio mode for Cinergy Hybrid XE

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Enable audio clock in radio mode

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Plug memory leak on PCM free

When releasing hardware resources, the DMA buffer allocated to the PCM
device needs to be freed to prevent a memory leak.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Do not use video buffers in radio mode

If the radio device is opened there is no need to initialize the video
buffer queue because it is not used.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Execute lightweight reset on close

When the last user closes the device, perform a lightweight reset of the
device to bring it into a well-known state.

Note that this is not always enough with the TM6010, which sometimes
needs a hard reset to get into a working state again.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Initialize isochronous transfers only once

This fixes a memory leak where isochronous buffers would be set up for
each video buffer, while it is sufficient to set them up only once per
device.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Properly count device usage

When the USB device is disconnected, the device usage bit is not cleared
properly. This leads to errors when a device is unplugged and replugged
several times until all TM6000_MAXBOARDS bits are used and keeps the
driver from binding to the device.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Add locking for USB transfers

This commit introduces the usb_lock mutex to ensure that a USB request
always gets the proper response. While this is currently not really
necessary it will become important as there are more users.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Rework standard register tables

This commit uses sentinel entries to terminate the TV standard register
tables instead of hard-coding their size, allowing further entries to be
added more easily. It is also more space-efficient if the tables have a
varying number of entries.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Disable video interface in radio mode

Video data is useless in radio mode, so the corresponding interface can
be safely disabled. This should reduce the amount of isochronous traffic
noticeably.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Rename active interface register

The register ACTIVE_VIDEO_IF register should be named ACTIVE_IF since it
controls more than just the video interface.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Flesh out the IRQ callback

This brings the IRQ callback implementation more in line with how other
drivers do it.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Implement I2C flush callback

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Use correct input in radio mode

In radio mode, the correct input is rinput. The pseudo index 5 is used
but cannot be used to index the vinput array because that only has 3
elements.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Miscellaneous cleanups

This commit fixes a number of coding style issues as well as some issues
reported by checkpatch and sparse.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner/xc2028: Fix frequency offset for radio mode

In radio mode, no frequency offset should be used.

Instead of taking Thierry's patch that creates a separate function
to calculate the digital offset, it seemed better to just keep
everything at the same place.

Reported-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner/xc2028: Add I2C flush callback

When loading the firmware, complete each chunk by sending an I2C flush
command to the frontend. Some devices like the tm6000 seem to require
this to properly flush the I2C buffers.

The current code in tm6000 executes the flush command once after each
I2C transfer, which slows down the firmware loading especially when
loading large BASE type images.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] omap3isp: ccdc: Use generic frame sync event instead of private HS_VS event

The ccdc block in the omap3isp produces events whenever it starts receiving
a new frame. A private HS_VS event was used for this previously. Now, the
generic V4L2_EVENT_FRAME_SYNC event is being used for the purpose.

This patch also provides the frame sequence number to user space.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: events: Define V4L2_EVENT_FRAME_SYNC

Define a frame sync event to tell user space when the reception of a frame
starts.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttusb2: add support for the dvb-t part of CT-3650 v3

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: notch filter control fixes

This patch reduces the number of available choices for the notch filter type control
so that the standard-specific filter types cannot be selected. It is now limited to
being either 0 (4xFsc, the default) or 1 (square pixel optimized).
The patch also removes the initialization of this control from cx88_reset(), since
that is already done by init_controls(), which is called by cx8800_initdev().

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: Use standard logging, remove tda18212_priv.h

Use the more current logging styles with pr_fmt.
Remove now unnecessary private include.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18271: Use printk extension %pV

Deduplicate printk formats to save ~20KB text.

$ size drivers/media/common/tuners/tda18271*o.*
   text    data     bss     dec     hex filename
  10747      56    1920   12723    31b3 drivers/media/common/tuners/tda18271-common.o.new
  18889      56    3112   22057    5629 drivers/media/common/tuners/tda18271-common.o.old
  20561     204    4264   25029    61c5 drivers/media/common/tuners/tda18271-fe.o.new
  31093     204    6000   37297    91b1 drivers/media/common/tuners/tda18271-fe.o.old
   3681    6760     440   10881    2a81 drivers/media/common/tuners/tda18271-maps.o.new
   5631    6760     680   13071    330f drivers/media/common/tuners/tda18271-maps.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9015: use logic or instead of sum numbers

Style issue.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9015: map remote for Leadtek WinFast DTV2000DS

Thanks to Thomas Gutzler for reporting this.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Thomas Gutzler <thomas.gutzler@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: use MFE lock for PCTV nanoStick T2 290e

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/dvb/dvb-usb/usb-urb.c: adjust array index

Convert array index from the loop bound to the loop index.

A simplified version of the semantic patch that fixes this problem is as

// <smpl>
@@
expression e1,e2,ar;
@@

for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add support for new revision of KNC 1 DVB-C cards. Using tda10024 instead of tda10023, which is compatible to tda10023 driver

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] get_dvb_firmware: Firmware extraction for IT9135 based devices

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: Driver for Kworld UB499-2T (id 1b80:e409) v1.05

Driver for Kworld UB499-2T (id 1b80:e409)

The device driver has been named it913x, so that support for other family members
can be added later.

TODOs
Firmware support for other it913x devices.
Remote control support, there are two known types.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it9137: Fimrware retrival information for Kworld UB499-2T T09 (id 1b80:e409)

Firmware information for Kworld UB499-2T T09 based on IT913x series. This device
uses file dvb-usb-it9137-01.fw.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x_fe: frontend and tuner driver v1.05

Fronted and Tuner Driver for ITE IT913x Series with inital support for
IT9137 integrated demodulator and tuner device.

The driver is loosely based on AF9035 series. However, support is not intended for
this device specificity.

The IT9137 tuner has been tested on UHF bands, but VHF has only been simulated.

Possible TODO the tuner sections may be separated from the main driver. All future devices
should use the it913x_fe_script_loader for other tuner devices.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
[mchehab@redhat.com: Fix an issue at the Kconfig help]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] siano: apply debug flag to module level

Siano modules already had sms_dbg flag which is a module parameter which
sets the debug mode so module prints messages to dmesg for debugging.
The variable was static therefore apply only to the file which defines
the module. In modules as smsmdtv.ko that contain a few files, the debug
flag applied only for functions in that main file.
flag was changed to be non-static and therefore can be accessed by all
module files (although it is still not exported out of the module).

Signed-off-by: Doron Cohen <doronc@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: update version, copyright, author

Add note about recent updates coming from Microsoft's publicly available
specs on Windows Media Center remotes and receivers/transmitters.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: report actual tx frequencies

Rather than dumping out hex values, lets print the actual calculated
frequency and period the hardware has been configured for. After this

[ 2643.276215] mceusb 3-1:1.0: tx data: 9f 07 (length=2)
[ 2643.276218] mceusb 3-1:1.0: Get carrier mode and freq
[ 2643.277206] mceusb 3-1:1.0: rx data: 9f 06 01 42 (length=4)
[ 2643.277209] mceusb 3-1:1.0: Got carrier of 37037 Hz (period 27us)

Matches up perfectly with the table in Microsoft's docs.

Of course, I've noticed on one of my devices that the MS-recommended
default value of 1 for carrier pre-scaler and 66 for carrier period was
butchered, and instead of converting 66 to hex (0x42 like above), they
put in 0x66, so the hardware reports a default carrier of 24390Hz.
Fortunately, I guess, this particular device is rx-only, but I wouldn't
put it past other hw to screw up here too.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: flash LED (emu v2+ only) to signal end of init

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: get misc port data from hardware

According to the specs, you can read the number of tx ports, number of
rx sensors, which tx ports have cables plugged into them, and which rx
sensors are active. In practice, most of my devices do seem to report
sane values for tx ports and rx sensors (but not all -- one without any
tx ports reports having them), and most report the active sensor
correctly, but only one of eight reports cabled tx ports correctly. So
for the most part, this is just for informational purposes.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: query device for firmware emulator version

Supposedly, there are essentially three different classes of devices
that are compatible with Microsoft's specs. First are the "legacy"
devices, which are built using Microsoft-provided hardware specs and
firmware. Second are "emulator" devices, which are built using custom
hardware and firmware, written to emulate Microsoft's firmware. Third
are "port" devices, which have their own device driver and firmware,
which provides compatible data to higher levels of the stack.

>From what I can tell, things like nuvoton-cir and fintek-cir are
essentially "port" devices -- their raw IR buffer format is very similar
to that of the mceusb devices. Now, within the mceusb driver, we have
three different "generations", which at first, seemed like maybe they
mapped to emulator versions. Unfortuantely, every single device I have
responds "illegal command" to the query to get firmware emulator version
from the hardware, which means they're either all emulator version 1, or
they're legacy devices, and our different "generations" aren't at all
related here. Though in theory, its possible the gen1 devices are
"legacy" devices and the rest are emulator v1. There are some useful
features of the v2 interface I was hoping to play with, but alas...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: issue device resume cmd when needed

According to MS docs, the device firmware may halt after receiving an
unknown instruction, but that it should be possible to tell the firmware
to continue running by simply sending a device resume command. So lets
do that.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: set wakeup bits for IR-based resume

Its not uncommon for folks to force these bits enabled, because people
do want to wake their htpc kit via their remote. Lets just set the bits
for 'em.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: give hardware time to reply to cmds

Sometimes the init routine is blasting commands out to the hardware
faster than it can reply. Throw a brief delay in there to give the
hardware a chance to reply before we send the next command.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: command/response updates from MS docs

I was recently pointed to the document titled
Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf
which as of this writing, is publicly available from
download.microsoft.com. It covers a LOT of the gaps in the mceusb
driver, which to this point, was written almost entirely by
reverse-engineering. First up, I'm updating the defines for all the MCE
commands and responses to match their names in the spec. More to come...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>