staging: brcm80211: Remove abstraction of pci_(alloc/free)_consistent

The abstraction for allocating and freeing dma descriptor memory
has been removed and replaced by usage of pci_alloc_consistent and
pci_free_consistent.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove abstractions for pci_(un)map_single

The driver had abstracted DMA mapping functions. As abstraction
is not required for the linux driver, these have been removed
and replaced by native linux functions.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Fix memory leak after kmalloc failure

This error was spotted by cppcheck:

drivers/staging/brcm80211/phy/wlc_phy_lcn.c:4053: error: Memory leak: ptr

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed compile warning

A warning was generated if CONFIG_BRCMDBG=n. Fixed this by introducing an
function.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: gma500: Add 2D acceleration

This is taken from Richard Purdie's previous attempt to rip the heart out
of the PVR driver and stake it.

Accelerate copies and fills.

[Revised patch which disables the methods until we can finish debugging them]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: delete ti-st from staging

The 2 drivers originally staged, the core ti-st driver
and the btwilink bluetooth driver have now moved to relevant
directories, so deleting the ti-st/ from staging.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro: adis16060 cleanup, move to abi and bug fixes.

Moved to standard sysfs naming and got rid of direct register writing from
userspace.

The rx and tx buffers are never used together so just have one and avoid
the need to malloc it by using putting it in the state structure and
using the ____cacheline_aligned trick.

A number of obvious bugs also fixed and correction of register address
defines in header which has now been squashed into the driver.

I don't have one of these so can't test. This is done off datasheet.
Note that the driver had parts that definitely wouldn't work before
this patch.  Now it 'might' assuming I haven't messed up too badly.

I've left fixing the fact that you can only have one of these on a given
machine for another day.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro: adis16130 cleanup, move to abi and bug fixes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro remove adis16251 driver as now supported by adis16260 driver

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro: add adis16251 support to adis16260 driver

These parts are very similar and the adis16260 driver supports
a lot of additional functionality.

Precursor to removal of adis16251 driver.

Note that some supported devices were missing from Kconfig help text
and are also added in this patch.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro: adis16080 cleanup, move to abi and bug fixes.

Moved to standard sysfs naming and got rid of direct register writing
from userspace.

The rx and tx buffers are never used together so just have one and
avoid the need to malloc it by using putting it in the state structure
and using the ____cacheline_aligned trick.

Couple of obvious bug fixes whilst I was here.

I don't have one of these so can't test. This is done off datasheet.
Note that as with the adis16060 driver there are parts that definitely
wouldn't work before this patch.  Now it 'might' assuming I haven't
messed up too badly.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: add first level indentation to easycap_ioctl.c

Add the first level indentation to easycap_testcard.c with astyle -t8.
About 100 of 80 columns warnings were left out for further fix

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: add first level indentation to easycap_testcard.c

Add the first level indentation to easycap_testcard.c with astyle -t8.
No chackpatch warnings were created

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: add first level indentation to easycap_sound_oss.c

Add first level indentation to easycap_sound_oss.c with astyle -t8
62 lines over 80 characters were left out for further fix

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: add first level indentation to easycap_sound.c

Add the first level indentation to easycap_sound.c with astyle -t8.
41 lines over 80 characters were left out for further fix

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: add first level indentation to easycap_main

Add first level indentation to easayca_main.c
This created around 300 lines over 80 characters.
Around 100 of straight forward once were fixed in this patch.
The another 200 require more code movement and need to be fixed
later

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete unused module parameter "noaccel"

The parameter is not used by the driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete XGI_accel.[ch]

The files contain nothing actually needed by the driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: eliminate "accel" field from video_info

The value is always false, so the field can be eliminated.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: eliminate fbcon_XGI_fillrect()

fbcon_XGI_fillrect() implementation is trivial and can be replaced with
cfb_fillrect().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: eliminate fbcon_XGI_copyarea()

fbcon_XGI_copyarea() implementation is trivial and can be replaced with
cfb_copyarea().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: ADC: AD799x: Update timestamp handling

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: ADC: AD7606: Update timestamp handling

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: ADC: AD7887: Update timestamp handling

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: ADC: AD7476: Update timestamp handling

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: iio_utils: fix mask generation

Variable sizeint is used uninitialized.
Remove sizeint completely and use bits_used instead.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: iio_utils: Prevent buffer overflow

The first part of build_channel_array()identifies the number of enabled channels.
Further down this count is used to allocate the ci_array. The next section parses the
scan_elements directory again, and fills ci_array regardless if the channel is enabled or not.
So if less than available channels are enabled ci_array memory is overflowed.

This fix makes sure that we allocate enough memory. But the whole approach looks a bit
cumbersome to me. Why not allocate memory for MAX_CHANNLES, less say 64
(I never seen a part with more than that channels). And skip the first part entirely.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: iio_utils: style consistency fix

No functional changes

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: iio_utils: Avoid double free()

filename is used and freed later

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: generic_buffer example: Avoid NULL pointer dereference

In case optarg n is not given return/exit

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: ADC: New driver for the AD7298 8-channel SPI ADC

This patch adds support for the
AD7298:  8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor
via SPI bus.

This patch replaces the existing ad7298.c driver completely.
It was necessary since, the old driver did not comply with the
IIO ABI for such devices.

Changes since V1:
IIO: ADC: New driver for the AD7298 8-channel SPI ADC

Add documentation for new sysfs file tempX_input.
Simplify bit defines.
Remove outdated comments.
Fix indention style.
ad7298_show_temp():
Add locking.
Simplify temperature calculation.
Change temperature result from degrees into milli degrees Celsius.
Rename file according to new sysfs ABI documentation

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: remove unreachable code

Remove some more unreachable code found in bridges/vme_ca91cx42.c
and bridges/vme_tsi148.c

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: remove unreachable code

Remove some unreachable code (kfree calls) from vme.c

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: add mouse driver

This driver adds mouse support to the hyper-v subsystem.

The code was originally written by Citrix, modified heavily by Hank at
Microsoft, and then further by me, to get it to build properly due to
all of the recent hyperv changes in the tree.

At the moment, it is marked "BROKEN" as it has not been tested well, and
it will conflict with other api changes that KY is doing, which I will
fix up later in this driver.

It still needs lots of work, and normal "cleanup".  I don't recommend
anyone running it on their machine unless they are very brave and know
how to debug kernel drivers in a hyperv system.

Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: fix brightness level and add new device ids

The patch is against the 2.6.37 drivers/staging/samsung-laptop
driver and implements some extra enhancements.

It fixes an issue that the brightness would not change the level at
once as well as and some other oddities. It was resolved by
reallocated the SABI memory reagion using the "nocache" option.

The patch also introduces a new set of supported netbook models,
especially the NC10plus which was used for testing this patch. This new
set of models also offer 9 instead of just 8 brightness levels so it
also introduces an additional parameter for the models struct so that
models can define their own brightness range.

Signed-off-by: Nils Faerber <nils.faerber@kernelconcepts.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: Add P460 to supported laptops

Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: Constify samsung-laptop.c

Change sabi_config to const.
Reduces data, increases text ~200 bytes.

$ size drivers/platform/x86/samsung-laptop.o*
   text    data     bss     dec     hex filename
   6933    5084    1560   13577    3509 drivers/platform/x86/samsung-laptop.o.new
   6765    5252    1560   13577    3509 drivers/platform/x86/samsung-laptop.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: samsung-laptop: address review comments

Fixed up the printk stuff to use pr_XXX where applicable, and reversed
the logic when testing for commands to complete properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: samsung-laptop: fix header address for N128

When doing the conversion to the "support more than one model" the
header address of the N128 was incorrectly copied.

This fixes the driver to work properly now on this laptop model.

Cc: Ingmar Steen <iksteen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: samsung-laptop: Add support for Samsung NP-X120/X170 laptop

Add Samsung NP-X120/X170 laptop DMI signature to samsung-laptop DMI table.

Signed-off-by: Roman Grebennikov <grebennikov.roman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: samsung-laptop: add support for R519 laptops

Reported-by: Piotr Mitas <yabolus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: samsung-laptop: add support for r70 laptops

Reported-by: Evgeny Bobkin <stwooe@mail.tu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: samsung-laptop: add support for N145P/N250P/N260P machines

Add DMI data for Samsung N145P/N250P/N260P

Signed-off-by: Richard Schütz <r.schtz@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: fix loop condition

Fix loop condition in vme_register_bridge that results in an infinite
loop in the event that device_register fails.

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: remove unreachable code

Removed some unreachable code from vme_register_bridge

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: IIO: trigger: New Blackfin specific trigger driver iio-trig-bfin-timer

This driver allows any Blackfin system timer to be used as IIO trigger.
It supports trigger rates from 0 to 100kHz in Hz resolution.

Changes since V1:
IIO: trigger: Apply review feedback

Add comment explaining Blackfin hardware timer configurations
Fix frequency_store, don't return -EINVAL for frequency set to 0

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: IIO: DAC: Add support for the AD5543/AD5553

Add support for the AD5543/AD5553 SPI 16-/14-Bit DACs
Fix typo in kconfig description

Changes since V1:
reorder Kconfig help text

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4

This patch adds support for the:
AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition
system (DAS) with 16-Bit, Bipolar, Simultaneous Sampling ADC.

Changes since V1:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback

Rename sysfs node oversampling to oversampling_ratio.
Kconfig: Add GPIOLIB dependency.
Use range in mV to better match HWMON.
Rename ad7606_check_oversampling.
Fix various comments and style.
Reorder is_visible cases.
Use new gpio_request_one/array and friends.
Drop check for SPI max_speed_hz.

Changes since V2:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback

Documentation: specify unit
Avoid raise condition in ad7606_scan_direct()
Check return value of bus ops read_block()

Changes since V3:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Add missing include file

Add linux/sched.h

Changes since V4:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Fix kconfig declaration

consistently use tristate to avoid configuration mismatches

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Bluetooth: btwilink driver

This is the bluetooth protocol driver for the TI WiLink7 chipsets.
Texas Instrument's WiLink chipsets combine wireless technologies
like BT, FM, GPS and WLAN onto a single chip.

This Bluetooth driver works on top of the TI_ST shared transport
line discipline driver which also allows other drivers like
FM V4L2 and GPS character driver to make use of the same UART interface.

Kconfig and Makefile modifications to enable the Bluetooth
driver for Texas Instrument's WiLink 7 chipset.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix olpc_dcon kconfig and build errors

drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:106: error: 'acpi_gbl_FADT' undeclared (first use in this function)

Fixing that one gives:

ERROR: "backlight_device_register" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
ERROR: "registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
ERROR: "lock_fb_info" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
ERROR: "num_registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
ERROR: "fb_blank" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Acked-By: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: speakup: fix an out-of-bounds error.

The cur_item variable from keyhelp.c is an index into a table of
messages.  The following condition should always hold:
MSG_FUNCNAMES_START + cur_item <= MSG_FUNCNAMES_END.
The check in keyhelp.c was wrong.  It allowed cur_item to be
incremented to an out-of-bounds value.

Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/et131x: fix et131x_rx_dma_disable halt_status usage

Commit 1bd751c1abc1029e8a0ae63ef4f19357c735a2a3
("Staging: et131x: Clean up rxdma_csr") changed csr from bitfield to
u32, but failed to convert 2 uses of halt_status bit. It did:

- if (csr.bits.halt_status != 1)
+ if ((csr & 0x00020000) != 1)

which is wrong, because second version is always true.
Fix it.

This bug was found by coccinelle (http://coccinelle.lip6.fr/).

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete redundant XGIhw_ext fields

pSR and pCR fields can be deleted with no changes in the functionality.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete dead code for skipping the video memory sizing

Delete dead code for skipping the video memory sizing.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Remove unused function fbcon_XGI_sync

Due a cleanup in earlier patches, the function fbcon_XGI_sync now does nothing
so it has to be removed.

This patches removes the unused function.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Remove unused spinlock in struct video_info

xgifb framebuffer driver had an option to use an accelerator engine that never
got used (XGIfb_accel was always 0).

An earlier patchset removed the code relevant to the accelerator.
Since this spinlock was used only for that code, it can be deleted as well.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Remove all the references to XGIfb_accel

xgifb framebuffer driver has an option to use an accelerator engine that never
get used (XGIfb_accel is always 0).

An earlier patchset remove the code that depends on the accelerator being
activated. This patch removes all the references to XGIfb_accel.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Remove unused spinlock conditional compilation logic

xgifb staging driver for XG20, XG21, XG40, XG42 frame buffer device
has a accelerator engine that never get used (XGIfb_accel is always 0).

Also the driver has a set of defines that hides the synchronization
mechanism used to access critical sections and a way to disable spinlocks
use at compile time.

In a earlier patch all the code that depends on the accelerator being active
was deleted because it was dead code. Since the only usage of this
synchronization defines were in that dead code, this patch removes all the
now unused spinlock conditional compilation logic.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Remove unused functions

Earlier patch removed code that never got executed because it depended on
XGIfb_accel variable value to de distinct than 0. But this variable is
always 0 in current driver.

That dead code used a set of functions that not remains unused.

This patch removes these unused functions.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: xgifb: Removes dead code

xgifb staging driver has code that dependens on XGIfb_accel != 0.
But as Dan Carpenter noticed, XGIfb_accel value is always 0 in current driver.
So there is code that never gets executed.

This patch removes this dead code.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: use USB_SUBCLASS_AUDIOSTREAMING instead of 0x02

use USB_SUBCLASS_AUDIOSTREAMING constant from usb/audio.h
instead of 0x02

Cc: Mike Thomas <rmthomas@sciolus.org>
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: easycap_usb_probe: more indentation cleanups

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: revamp inputset population code

make inputset population to be more compact and readable

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: fix style issues in easycap_usb_probe function

fix some code styles and drop too verbose printouts
and non relevant code

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "staging: iio: ak8975: add platform data."

This reverts commit f2f1794835f1d8900d2b15d114c54e70c849809b.

It should not be putting code into the include/input/ directory, and
lots of other people have complained about it.

Cc: Tony SIM <chinyeow.sim.xt@renesas.com>
Cc: Andrew Chew <achew@nvidia.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove struct member irq_mask

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Make RT_TRACE use consistent

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Make functions static

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Delete dead code

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove externs, redundant comments

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove USB related code

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove useless usermode callback

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: added locks in wl_mac80211.c

Increasing robustness of the code, although no problem has been reported
in the field. Several code paths were unshielded for multi thread access.
Several lock acquisitions have been added to wl_mac80211.c

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed locks around Mac80211 calls

A spinlock was acquired prior to calling the Mac80211 functions
ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions
wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling().
This is not required and could even lead to instability. Therefore the locks
were removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cosmetic changes

Code cleanup. Added lock related comments to wl_mac80211.c. Also removed a
redundant function definition.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove some bsscfg attribute that are redundant

In the struct wlc_bsscfg a couple of attribute were held under a
preprocessor definition, but these are not needed in the mac80211
driver context.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: allow changing channel by mac80211 when associated

When associated on 5G the driver receives a probe request for 2G with
a 2G rate specified. The driver asserts as the operating band is still
5G when the probe request packet is given. Root cause was that ioctl
function did fail upon setting the channel as requested by mac80211
when we are associated.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove the rest of broadcom specific byte swapping routines

- move ltoh16_buf/htol16_buf util/bcmsrom.c
- replace ltoh16_buf in brcmsmac/wlc_mac80211.c with several
  le16_to_cpu's

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace htod/dtoh broadcom defines

htod32 -> cpu_to_le32
htod16 -> cpu_to_le16
dtoh32 -> le32_to_cpu
dtoh16 -> le16_to_cpu

For brcmfmac/dhd_common.c just removed defines.

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused broadcom byte swapping macroses

- BCMSWAP32
- bcmswap32
- BCMSWAP32BY16
- bcmswap32by16

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace broadcom specific unaligned byte swapping routines

htol16_ua_store -> put_unaligned_le16
htol32_ua_store -> put_unaligned_le32
hton16_ua_store -> put_unaligned_be16
hton32_ua_store -> put_unaligned_be32
ltoh16_ua -> get_unaligned_le16
ltoh32_ua -> get_unaligned_le32
ntoh16_ua -> get_unaligned_be16
ntoh32_ua -> get_unaligned_be32

removed unused:
- load32_ua
- load16_ua
- store32_ua
- store16_ua
- ltoh_ua
- ntoh_au

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace broadcom specific byte swapping routines

HTON16/hton16 -> cpu_to_be16 (htons for networking code)
HTON32/hton32 -> cpu_to_be32 (htonl for networking code)
NTOH16/ntoh32 -> be16_to_cpu (ntohs for networking code)
NTOH32/ntoh32 -> be32_to_cpu (ntohl for networking code)
LTOH16/ltoh16 -> le16_to_cpu
LTOH32/ltoh32 -> le32_to_cpu
HTOL16/htol16 -> cpu_to_le16
HTOL32/htol32 -> cpu_to_le32

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for crash on heavy transmit traffic

With heavy transmit traffic, once in a while (range 15mins-1hr)
a tx packet was added to a full transmit queue. Under certain
conditions an other packet in the queue gets bumped to make room
for the new packet. This is not considered an error condition, but
normal operation. Despite that, there was an ASSERT(0) that caused
the driver to oops. The ASSERT(0) has been removed. Driver was tested
afterwards.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Allow sharing xvmalloc for zram and zcache

Both zram and zcache use xvmalloc allocator. If xvmalloc
is compiled separately for both of them, we will get linker
error if they are both selected as "built-in". We can also
get linker error regarding missing xvmalloc symbols if zram
is not built.

So, we now compile xvmalloc separately and export its symbols
which are then used by both of zram and zcache.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Eliminate cfg80211 warnings

Cancel the pending scan operation once the interface is going down to
avoid warnings from the cfg80211 module. Once the interface is down,
cfg80211 checks for any pending scan requests and dumps a warning if it
finds one. It expects the driver to abort any ongoing scan operation
once the driver detects that the interface is going down.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: buffer overflow in SEND_FRAME ioctl

We should check that optTxFrmCmd.optIEDataLen isn't too large before we
copy it into the data buffer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: cleanup in SEND_FRAME ioctl

The original code was written in a funny way where every statement was
part of else if blocks.  I broke them up into separate statements by
adding breaks on failure conditions.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: update TODO file / maintainers

This updates the TODO file to reflect new changes on development.

Cc: Joe Perches <joe@perches.com>
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: gma500: fix up trailing whitespace errors

Lots of little ones all through the driver, mostly
all in a cut-and-paste header comment.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: gma500: remove psb_gfx.mod.c

The mod.c file should not be part of the repo.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: gma500: Intel GMA500 staging driver

This is an initial staging driver for the GMA500. It's been stripped out
of the PVR drivers and crunched together from various bits of code and
different kernels.

Currently it's unaccelerated but still pretty snappy even compositing with
the frame buffer X server.

Lots of work is needed to rework the ttm and bo interfaces from being
ripped out and then 2D acceleration wants putting back for framebuffer and
somehow eventually via DRM.

There is no support for the parts without open source userspace (video
accelerators, 3D) as per kernel policy.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

connector: Convert char *name to const char *name

Allow more const declarations.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Fix the WARN_ON condition in free_net_device()

In a previous commit, 7a09876d, ASSERT was changed to WARN_ON, but
the condition wasn't updated. This patch fixed this error.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove unnecessary ASSERTs in netvsc_initialize()

These fields have been assigned in netvsc_drv_init() before calling
netvsc_initialize(), so there is no need to check them.
The ASSERTs were already commented out, and this patch removes
them.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "select"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "memory"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "management"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "initiali[zs]e"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "implementation"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "function"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>