GitHub/LineageOS/android_kernel_samsung_universal7580.git
19 years agopowerpc: Initialize secondary CPU setup for 32-bit SMP
Paul Mackerras [Fri, 11 Nov 2005 11:34:43 +0000 (22:34 +1100)]
powerpc: Initialize secondary CPU setup for 32-bit SMP

32-bit SMP powermacs weren't booting with ARCH=powerpc because the
boot cpu wasn't saving away the state of various control registers,
but the secondary CPUs were loading them from the uninitialized
state.  This adds the necessary save-state call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel
Benjamin Herrenschmidt [Fri, 11 Nov 2005 10:15:21 +0000 (21:15 +1100)]
[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel

This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] powerpc: remove initrd debug printk
David Woodhouse [Fri, 11 Nov 2005 08:07:11 +0000 (08:07 +0000)]
[PATCH] powerpc: remove initrd debug printk

This removes a stray debugging printk which offended Anton.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] powerpc: Move udbg code to arch/powerpc
David Gibson [Fri, 11 Nov 2005 05:42:12 +0000 (16:42 +1100)]
[PATCH] powerpc: Move udbg code to arch/powerpc

Since the udbg code in ppc64 has no ppc32 equivalent, move it straight
over into arch/powerpc (and include/asm-powerpc for udbg.h).  In time,
we probably want to meld the various bits and pieces of 32-bit early
debugging code into udbg, but for now only include it on
CONFIG_PPC64=y builds.  The only change during the move is to
standardise the protecting #ifdef/#define in udbg.h, and move its
banner comment above the initial #ifdef (which seems to be normal
practice).

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built
for 32bit multiplatform (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Increase sparsemem defaults
Anton Blanchard [Fri, 11 Nov 2005 04:02:03 +0000 (15:02 +1100)]
[PATCH] ppc64: Increase sparsemem defaults

The definitions in sparsemem.h arent sufficient. We currently sell
machines with 2TB of RAM, and in order to give us room for a few years
growth lets set it to 16TB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Convert NUMA to sparsemem (3)
Anton Blanchard [Fri, 11 Nov 2005 03:22:35 +0000 (14:22 +1100)]
[PATCH] ppc64: Convert NUMA to sparsemem (3)

Convert to sparsemem and remove all the discontigmem code in the
process. This has a few advantages:

- The old numa_memory_lookup_table can go away
- All the arch specific discontigmem magic can go away

We also remove the triple pass of memory properties and instead create a
list of per node extents that we iterate through. A final cleanup would
be to change our lmb code to store extents per node, then we can reuse
that information in the numa code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: prep for NUMA sparsemem rework 2
Anton Blanchard [Fri, 11 Nov 2005 03:13:20 +0000 (14:13 +1100)]
[PATCH] ppc64: prep for NUMA sparsemem rework 2

Remove ppc64 specific version of nr_cpus_node and use the generic one
provided.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: prep for NUMA sparsemem rework
Anton Blanchard [Fri, 11 Nov 2005 03:12:26 +0000 (14:12 +1100)]
[PATCH] ppc64: prep for NUMA sparsemem rework

Remove an unused numa define and move a discontigmem specific define
inside the relevant ifdef.

I will submit a separate patch to remove them from other architectures,
but the ppc64 patches to follow depend on this.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Cleanup kprobe assembly
Anton Blanchard [Fri, 11 Nov 2005 03:07:20 +0000 (14:07 +1100)]
[PATCH] ppc64: Cleanup kprobe assembly

The kprobes code is doing ".previous .text". While the assembler doesnt
warn at the moment (and it seems to work), it might in the future.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Remove debug boot message
Anton Blanchard [Fri, 11 Nov 2005 02:56:16 +0000 (13:56 +1100)]
[PATCH] ppc64: Remove debug boot message

We have been printing the raw ppc64_firmware_features during boot. Since
we can work it out from the device tree, lets remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc64: Quieten lparcfg
Anton Blanchard [Fri, 11 Nov 2005 02:53:11 +0000 (13:53 +1100)]
[PATCH] ppc64: Quieten lparcfg

If we dont have permission to read some information from the hypervisor,
lparcfg outputs a warning on the console. Now that lparcfg is world
readable this is a problem.

Dont warn in the case of H_Authority, remove some unnecessary function
prototypes and fix whitespace damage in a structure as well.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago[PATCH] ppc32: fix PQ2 PCI DMA interrupt handling
Kumar Gala [Thu, 10 Nov 2005 16:34:33 +0000 (10:34 -0600)]
[PATCH] ppc32: fix PQ2 PCI DMA interrupt handling

The bit position in the status register corresponding to the
PCI DMA interrupt was incorrect.  Additionally, we did not
have a define for the PCI DMA interrupt.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 11 Nov 2005 05:37:50 +0000 (21:37 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

19 years ago[PATCH] lpfc build fix
Jeff Garzik [Fri, 11 Nov 2005 01:34:12 +0000 (20:34 -0500)]
[PATCH] lpfc build fix

Current upstream 'allmodconfig' build is broken.  This is the obvious
patch...

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 11 Nov 2005 05:24:21 +0000 (21:24 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

19 years ago[SPARC]: display7seg build fix
Andrew Morton [Fri, 11 Nov 2005 05:14:16 +0000 (21:14 -0800)]
[SPARC]: display7seg build fix

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[CIFS] Fix spaces in cifs kconfig entry
Steve French [Fri, 11 Nov 2005 03:36:39 +0000 (19:36 -0800)]
[CIFS] Fix spaces in cifs kconfig entry

Signed-off-by: Steve French <sfrench@us.ibm.com>
19 years ago[CIFS] Reduce sparse endian warnings
Steve French [Fri, 11 Nov 2005 03:28:44 +0000 (19:28 -0800)]
[CIFS] Reduce sparse endian warnings

Signed-off-by: Steve French <sfrench@us.ibm.com>
19 years agoMerge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Steve French [Fri, 11 Nov 2005 01:31:49 +0000 (17:31 -0800)]
Merge ... /linux/kernel/git/torvalds/linux-2.6.git

19 years ago[CIFS] Update CIFS change log
Steve French [Fri, 11 Nov 2005 01:31:33 +0000 (17:31 -0800)]
[CIFS] Update CIFS change log

Signed-off-by: Steve French <sfrench@us.ibm.com>
19 years ago[TCP]: speed up SACK processing
Stephen Hemminger [Fri, 11 Nov 2005 01:14:59 +0000 (17:14 -0800)]
[TCP]: speed up SACK processing

Use "hints" to speed up the SACK processing. Various forms
of this have been used by TCP developers (Web100, STCP, BIC)
to avoid the 2x linear search of outstanding segments.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: spelling fixes
Stephen Hemminger [Fri, 11 Nov 2005 01:13:47 +0000 (17:13 -0800)]
[TCP]: spelling fixes

Minor spelling fixes for TCP code.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: receive buffer growth limiting with mixed MTU
John Heffner [Fri, 11 Nov 2005 01:11:48 +0000 (17:11 -0800)]
[TCP]: receive buffer growth limiting with mixed MTU

This is a patch for discussion addressing some receive buffer growing issues.
This is partially related to the thread "Possible BUG in IPv4 TCP window
handling..." last week.

Specifically it addresses the problem of an interaction between rcvbuf
moderation (receiver autotuning) and rcv_ssthresh.  The problem occurs when
sending small packets to a receiver with a larger MTU.  (A very common case I
have is a host with a 1500 byte MTU sending to a host with a 9k MTU.)  In
such a case, the rcv_ssthresh code is targeting a window size corresponding
to filling up the current rcvbuf, not taking into account that the new rcvbuf
moderation may increase the rcvbuf size.

One hunk makes rcv_ssthresh use tcp_rmem[2] as the size target rather than
rcvbuf.  The other changes the behavior when it overflows its memory bounds
with in-order data so that it tries to grow rcvbuf (the same as with
out-of-order data).

These changes should help my problem of mixed MTUs, and should also help the
case from last week's thread I think.  (In both cases though you still need
tcp_rmem[2] to be set much larger than the TCP window.)  One question is if
this is too aggressive at trying to increase rcvbuf if it's under memory
stress.

Orignally-from: John Heffner <jheffner@psc.edu>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Appropriate Byte Count support
Stephen Hemminger [Fri, 11 Nov 2005 01:09:53 +0000 (17:09 -0800)]
[TCP]: Appropriate Byte Count support

This is an updated version of the RFC3465 ABC patch originally
for Linux 2.6.11-rc4 by Yee-Ting Li. ABC is a way of counting
bytes ack'd rather than packets when updating congestion control.

The orignal ABC described in the RFC applied to a Reno style
algorithm. For advanced congestion control there is little
change after leaving slow start.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: add tcp_slow_start helper
Stephen Hemminger [Fri, 11 Nov 2005 01:07:24 +0000 (17:07 -0800)]
[TCP]: add tcp_slow_start helper

Move all the code that does linear TCP slowstart to one
inline function to ease later patch to add ABC support.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: simplify microsecond rtt sampling
Stephen Hemminger [Fri, 11 Nov 2005 00:56:12 +0000 (16:56 -0800)]
[TCP]: simplify microsecond rtt sampling

Simplify the code that comuputes microsecond rtt estimate used
by TCP Vegas. Move the callback out of the RTT sampler and into
the end of the ack cleanup.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: fix congestion window update when using TSO deferal
Stephen Hemminger [Fri, 11 Nov 2005 00:53:30 +0000 (16:53 -0800)]
[TCP]: fix congestion window update when using TSO deferal

TCP peformance with TSO over networks with delay is awful.
On a 100Mbit link with 150ms delay, we get 4Mbits/sec with TSO and
50Mbits/sec without TSO.

The problem is with TSO, we intentionally do not keep the maximum
number of packets in flight to fill the window, we hold out to until
we can send a MSS chunk. But, we also don't update the congestion window
unless we have filled, as per RFC2861.

This patch replaces the check for the congestion window being full
with something smarter that accounts for TSO.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] PCI: fix for Toshiba ohci1394 quirk
Jesse Barnes [Wed, 9 Nov 2005 04:13:02 +0000 (20:13 -0800)]
[PATCH] PCI: fix for Toshiba ohci1394 quirk

After much testing and agony, I've discovered that my previous ohci1394
quirk for Toshiba laptops is not 100% reliable.  It apparently fails to
do the interrupt line change either correctly or in time, since in about
2 out of 5 boots, the kernel's irqdebug code will *still* disable irq 11
when the ohci1394 driver is loaded (at pci_enable_device time I think).

This patch switches things around a little in the workaround.  First, it
removes the mdelay.  I didn't see a need for it and my testing has shown
that it's not necessary for the quirk to work.

Secondly, instead of trying to change the interrupt line to what ACPI
tells us it should be, this patch makes the quirk use the value in the
PCI_INTERRUPT_LINE register.  On this laptop at least, that seems to be
the right thing to do, though additional testing on other laptops and/or
with actual firewire devices would be appreciated.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: fix namespace clashes
Rajesh Shah [Mon, 7 Nov 2005 21:37:36 +0000 (13:37 -0800)]
[PATCH] PCI: fix namespace clashes

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: Change MSI to use physical delivery mode always
Ashok Raj [Wed, 9 Nov 2005 05:42:33 +0000 (21:42 -0800)]
[PATCH] PCI: Change MSI to use physical delivery mode always

MSI hardcoded delivery mode to use logical delivery mode. Recently
x86_64 moved to use physical mode addressing to support physflat mode.
With this mode enabled noticed that my eth with MSI werent working.

msi_address_init()  was hardcoded to use logical mode for i386 and x86_64.
So when we switch to use physical mode, things stopped working.

Since anyway we dont use lowest priority delivery with MSI, its always
directed to just a single CPU. Its safe  and simpler to use
physical mode always, even when we use logical delivery mode for IPI's
or other ioapic RTE's.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: drivers/pci/: small cleanups
Adrian Bunk [Sun, 6 Nov 2005 00:45:08 +0000 (01:45 +0100)]
[PATCH] PCI: drivers/pci/: small cleanups

This patch contains the following cleanups:
- access.c should #include "pci.h" for getting the prototypes of it's
  global functions
- hotplug/shpchp_pci.c: make the needlessly global function
  program_fw_provided_values() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pci_ids cleanup: fix two additional IDs in bt87x
Grant Coady [Sat, 5 Nov 2005 23:52:51 +0000 (10:52 +1100)]
[PATCH] pci_ids cleanup: fix two additional IDs in bt87x

pci_ids cleanup: fixup bt87x.c: two macro defined IDs missed in prior cleanup.

Caught by Chun-Chung Chen <cjj@u.washington.edu>: "In the patch for bt87x.c,
you seemed have missed the two occurrences of BT_DEVICE on line 897 and
line 898."

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] dlpar regression for ppc64 - probe change
John Rose [Fri, 4 Nov 2005 21:38:50 +0000 (15:38 -0600)]
[PATCH] dlpar regression for ppc64 - probe change

This patch contains the driver bits for enabling DLPAR and PCI Hotplug
for the new OF-based PCI probe.  This functionality was regressed when
the new PCI approach was introduced.  Please apply if appropriate.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: removed unneeded .owner field from struct pci_driver
Greg Kroah-Hartman [Sat, 5 Nov 2005 02:56:13 +0000 (18:56 -0800)]
[PATCH] PCI: removed unneeded .owner field from struct pci_driver

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: automatically set device_driver.owner
Laurent riffard [Thu, 27 Oct 2005 21:12:54 +0000 (23:12 +0200)]
[PATCH] PCI: automatically set device_driver.owner

A nice feature of sysfs is that it can create the symlink from the
driver to the module that is contained in it.

It requires that the device_driver.owner is set, what is not the
case for many PCI drivers.

This patch allows pci_register_driver to set automatically the
device_driver.owner for any PCI driver.

Credits to Al Viro who suggested the method.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
--

 drivers/ide/setup-pci.c  |   12 +++++++-----
 drivers/pci/pci-driver.c |    9 +++++----
 include/linux/ide.h      |    3 ++-
 include/linux/pci.h      |   10 ++++++++--
 4 files changed, 22 insertions(+), 12 deletions(-)

19 years ago[PATCH] pci-driver: store_new_id() not inline
Randy Dunlap [Sat, 29 Oct 2005 03:36:51 +0000 (20:36 -0700)]
[PATCH] pci-driver: store_new_id() not inline

store_new_id() should not be (and cannot be) inline;
the function pointer is stored in a device_attribute table.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: NCR 53c810 quirk
Ivan Kokshaysky [Mon, 31 Oct 2005 22:43:56 +0000 (01:43 +0300)]
[PATCH] PCI: NCR 53c810 quirk

Move the PPC fixup for old NCR 810 controllers to generic quirks -
it's needed for Alpha, x86 and other architectures that use
setup-bus.c.

Thanks to Jay Estabrook for pointing out the issue.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: Fix VIA 686 PCI quirk names
Meelis Roos [Sat, 29 Oct 2005 10:31:49 +0000 (13:31 +0300)]
[PATCH] PCI: Fix VIA 686 PCI quirk names

The quirk names for VIA 686 are mistyped in 2.6.14 (686 vs 868). S3 868
influence? :) Here is a patch to correct them.

Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: fix handling of power faults during hotplug
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:13 +0000 (16:20 -0800)]
[PATCH] pciehp: fix handling of power faults during hotplug

The current pciehp implementation reports a power-fail error
even if the condition has cleared by the time the corresponding
interrupt handling code gets a chance to run. This patch
fixes this problem.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: clean-up how we request control of hotplug hardware
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:12 +0000 (16:20 -0800)]
[PATCH] pciehp: clean-up how we request control of hotplug hardware

This patch further tweaks how we request control of hotplug
controller hardware from BIOS. We first search the ACPI namespace
corresponding to a specific hotplug controller looking for an
_OSC or OSHP method. On failure, we successively move to the
ACPI parent object, till we hit the highest level host bridge
in the hierarchy. This allows for different types of BIOS's
which place the _OSC/OSHP methods at various places in the acpi
namespace, while still not encroaching on the namespace of
some other root level host bridge.

This patch also introduces a new load time option (pciehp_force)
that allows us to bypass all _OSC/OSHP checking. Not supporting
these methods seems to be be the most common ACPI firmware problem
we've run into. This will still _not_ allow the pciehp driver to
work correctly if the BIOS really doesn't support pciehp (i.e. if
it doesn't generate a hotplug interrupt). Use this option with
caution.  Some BIOS's may deliberately not build any _OSC/OSHP
methods to make sure it retains control the hotplug hardware.
Using the pciehp_force parameter for such systems can lead to
two separate entities trying to control the same hardware.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: request control of each hotplug controller individually
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:11 +0000 (16:20 -0800)]
[PATCH] pciehp: request control of each hotplug controller individually

This patch tweaks the way pciehp requests control of the hotplug
hardware from BIOS. It now tries to invoke the ACPI _OSC method
for a specific hotplug controller only, rather than walking the
entire acpi namespace invoking all possible _OSC methods under
all host bridges. This allows us to gain control of each hotplug
controller individually, even if BIOS fails to give us control of
some other hotplug controller in the system.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: reduce debug message verbosity
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:10 +0000 (16:20 -0800)]
[PATCH] pciehp: reduce debug message verbosity

Reduce the number of debug messages generated if pciehp debug is
enabled. I tried to restrict this to removing debug messages that
are either early-driver-debug type messages, or print information
that can be inferred through other debug prints.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: miscellaneous cleanups
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:09 +0000 (16:20 -0800)]
[PATCH] pciehp: miscellaneous cleanups

Remove un-necessary header includes, remove dead code, remove
some hardcoded constants...

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: remove redundant data structures
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:08 +0000 (16:20 -0800)]
[PATCH] pciehp: remove redundant data structures

State information is currently stored in per-slot as well as
per-pci-function data structures in pciehp. There's a lot of
overlap in the information kept, and some of it is never used.
This patch consolidates the state information to per-slot and
eliminates unused data structures. The biggest change is to
eliminate the pci_func structure and the code around managing
its lists.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pciehp: reduce dependence on ACPI
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:07 +0000 (16:20 -0800)]
[PATCH] pciehp: reduce dependence on ACPI

Reduce the PCI Express hotplug driver's dependence on ACPI.
We don't walk the acpi namespace anymore to build a list of
bridges and devices. We go to ACPI only to run the _OSC or
_OSHP methods to transition control of hotplug hardware from
system BIOS to the hotplug driver, and to run the _HPP
method to get hotplug device parameters like cache line size,
latency timer and SERR/PERR enable from BIOS.

Note that one of the side effects of this patch is that pciehp
does not automatically enable the hot-added device or its DMA
bus mastering capability now. It expects the device driver to
do that. This may break some drivers and we will have to fix
them as they are reported.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] patch 1/8] pciehp: use the PCI core for hotplug resource management
rajesh.shah@intel.com [Tue, 1 Nov 2005 00:20:06 +0000 (16:20 -0800)]
[PATCH] patch 1/8] pciehp: use the PCI core for hotplug resource management

This patch converts the pci express hotplug controller driver
to use the PCI core for resource management. This eliminates a
lot of duplicated code and integrates pciehp with the system's
normal PCI handling code.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: add pci_find_next_capability()
Roland Dreier [Sat, 29 Oct 2005 00:35:34 +0000 (17:35 -0700)]
[PATCH] PCI: add pci_find_next_capability()

Some devices have more than one capability of the same type.  For
example, the PCI header for the PathScale InfiniPath looks like:

04:01.0 InfiniBand: Unknown device 1fc1:000d (rev 02)
Subsystem: Unknown device 1fc1:000d
Flags: bus master, fast devsel, latency 0, IRQ 193
Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Capabilities: [f8] HyperTransport: Interrupt Discovery and Configuration

There are _two_ HyperTransport capabilities, and the PathScale driver
wants to look at both of them.

The current pci_find_capability() API doesn't work for this, since it
only allows us to get to the first capability of a given type.  The
patch below introduces a new pci_find_next_capability(), which can be
used in a loop like

for (pos = pci_find_capability(pdev, <ID>);
     pos;
     pos = pci_find_next_capability(pdev, pos, <ID>)) {
/* ... */
}

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 10 Nov 2005 23:39:44 +0000 (15:39 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

19 years agoMerge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Steve French [Thu, 10 Nov 2005 23:34:57 +0000 (15:34 -0800)]
Merge ... /linux/kernel/git/torvalds/linux-2.6.git

19 years ago[CIFS] Reserve upcall IDX value for CIFS with connector header and add
Steve French [Thu, 10 Nov 2005 23:33:38 +0000 (15:33 -0800)]
[CIFS] Reserve upcall IDX value for CIFS with connector header and add
Kconfig option for CIFS upcall.

Signed-off-by: Steve French <sfrench@us.ibm.com>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 10 Nov 2005 22:46:07 +0000 (14:46 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Thu, 10 Nov 2005 21:45:34 +0000 (13:45 -0800)]
Merge /pub/scm/linux/kernel/git/sam/kbuild

19 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Thu, 10 Nov 2005 21:27:06 +0000 (13:27 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

19 years ago[PATCH] Don't print per-cpu vm stats for offline cpus.
Dave Jones [Thu, 10 Nov 2005 20:45:56 +0000 (15:45 -0500)]
[PATCH] Don't print per-cpu vm stats for offline cpus.

I just hit a page allocation error on a kernel configured to support
64 CPUs.  It spewed 60 completely useless unnecessary lines of info.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[DCCP]: Alter website for DCCP in MAINTAINERS
Ian McDonald [Thu, 10 Nov 2005 21:05:01 +0000 (13:05 -0800)]
[DCCP]: Alter website for DCCP in MAINTAINERS

Website for DCCP is now hosted at OSDL

Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[DCCP]: Create Documentation/networking/dccp.txt
Ian McDonald [Thu, 10 Nov 2005 21:04:33 +0000 (13:04 -0800)]
[DCCP]: Create Documentation/networking/dccp.txt

This patch is a first go at some documentation. Please advise if gmail
has mangled patch and I will revert to an attachment:

Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Annotate h_proto in struct ethhdr
Pavel Roskin [Thu, 10 Nov 2005 21:03:08 +0000 (13:03 -0800)]
[NET]: Annotate h_proto in struct ethhdr

The protocol field in ethernet headers is big-endian and should be
annotated as such.  This patch allows detection of missing ntohs() calls
on the ethernet protocol field when sparse is run with __CHECK_ENDIAN__
defined.

This is a revised version that includes <linux/types.h> so that the
userspace programs are not confused by __be16.  Thanks to David S.
Miller.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Detect hardware rx checksum faults correctly
Herbert Xu [Thu, 10 Nov 2005 21:01:24 +0000 (13:01 -0800)]
[NET]: Detect hardware rx checksum faults correctly

Here is the patch that introduces the generic skb_checksum_complete
which also checks for hardware RX checksum faults.  If that happens,
it'll call netdev_rx_csum_fault which currently prints out a stack
trace with the device name.  In future it can turn off RX checksum.

I've converted every spot under net/ that does RX checksum checks to
use skb_checksum_complete or __skb_checksum_complete with the
exceptions of:

* Those places where checksums are done bit by bit.  These will call
netdev_rx_csum_fault directly.

* The following have not been completely checked/converted:

ipmr
ip_vs
netfilter
dccp

This patch is based on patches and suggestions from Stephen Hemminger
and David S. Miller.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BNX2]: simplify parameter checks in bnx2_{get,set}_eeprom
John W. Linville [Thu, 10 Nov 2005 20:58:24 +0000 (12:58 -0800)]
[BNX2]: simplify parameter checks in bnx2_{get,set}_eeprom

Remove the superfluous parameter checking in bnx2_{get,set}_eeprom.
The parameters are already validated in ethtool_{get,set}_eeprom.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BNX2]: check return of dev_alloc_skb in bnx2_test_loopback
John W. Linville [Thu, 10 Nov 2005 20:58:00 +0000 (12:58 -0800)]
[BNX2]: check return of dev_alloc_skb in bnx2_test_loopback

Check return of dev_alloc_skb in bnx2_test_loopback, and handle
appropriately.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BNX2]: output driver name as prefix in error message
John W. Linville [Thu, 10 Nov 2005 20:57:33 +0000 (12:57 -0800)]
[BNX2]: output driver name as prefix in error message

Output driver name as prefix to "Unknown flash/EEPROM type." message.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ATM]: [horizon] fix sparse warnings
Dave Jones [Thu, 10 Nov 2005 20:55:52 +0000 (12:55 -0800)]
[ATM]: [horizon] fix sparse warnings

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Chas Williams <cmas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] kbuild: build breaks after -imacros was introduced
Zachary Amsden [Mon, 7 Nov 2005 23:27:51 +0000 (15:27 -0800)]
[PATCH] kbuild: build breaks after -imacros was introduced

I have to revert the recent addition of -imacros to the Makefile to get my
tool chain to build.  Without the change, below, I get:

Note that this looks entirely like a toolchain bug.  Here is the offending command:

[pid 12163] execve("/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", ["/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", "-lang-asm", "-nostdinc", "-Iinclude", "-Iinclude/asm-i386/mach-default", "-D__GNUC__=3", "-D__GNUC_MINOR__=2", "-D__GNUC_PATCHLEVEL__=2", "-D__GXX_ABI_VERSION=102", "-D__ELF__", "-Dunix", "-D__gnu_linux__", "-Dlinux", "-D__ELF__", "-D__unix__", "-D__gnu_linux__", "-D__linux__", "-D__unix", "-D__linux", "-Asystem=posix", "-D__NO_INLINE__", "-D__STDC_HOSTED__=1", "-Acpu=i386", "-Amachine=i386", "-Di386", "-D__i386", "-D__i386__", "-D__tune_i386__", "-D__KERNEL__", "-D__ASSEMBLY__", "-isystem", "/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/include", "-imacros", "include/linux/autoconf.h", "-MD", "arch/i386/kernel/.entry.o.d", "arch/i386/kernel/entry.S", "-o", "/tmp/ccOlsFJR.s"]

Which should execute properly, I think.  But it does not:

zach-dev:linux-2.6.14-zach-work $ make
  CHK     include/linux/version.h
  CHK     include/linux/compile.h
  CHK     usr/initramfs_list
  AS      arch/i386/kernel/entry.o
/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0: output filename specified twice
make[1]: *** [arch/i386/kernel/entry.o] Error 1
make: *** [arch/i386/kernel] Error 2

gcc (GCC) 3.2.2 20030222 (Red Hat Linux 3.2.2-5)

Deprecating the -imacros fixes the build for me.  It does not appear to be a
simple argument overflow problem in trapcpp0, since deprecating all the defines
reproduces the problem as well.  Also, switching -imacros to -include fixes the
problem.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
19 years ago[SPARC64]: Re-export uts_sem for solaris compat module.
David S. Miller [Thu, 10 Nov 2005 20:47:50 +0000 (12:47 -0800)]
[SPARC64]: Re-export uts_sem for solaris compat module.

Revert: b26b9bc58263acda274f82a9dde8b6d96559878a

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IA64] utilize notify_die() for XPC disengage
Dean Nelson [Wed, 9 Nov 2005 20:41:57 +0000 (14:41 -0600)]
[IA64] utilize notify_die() for XPC disengage

XPC (as in arch/ia64/sn/kernel/xp*) has a need to notify other partitions
(SGI Altix) whenever a partition is going down in order to get them to
disengage from accessing the halting partition's memory. If this is not
done before the reset of the hardware, the other partitions can find
themselves encountering MCAs that bring them down.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] Replace kcalloc(1, with kzalloc.
Panagiotis Issaris [Wed, 9 Nov 2005 01:08:42 +0000 (02:08 +0100)]
[IA64] Replace kcalloc(1, with kzalloc.

Conversion from kcalloc(1, to kzalloc.

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years agoPull add-mmio-to-proc-iomem into release branch
Tony Luck [Thu, 10 Nov 2005 18:40:32 +0000 (10:40 -0800)]
Pull add-mmio-to-proc-iomem into release branch

19 years agoPull context-bitmap into release branch
Tony Luck [Thu, 10 Nov 2005 18:39:49 +0000 (10:39 -0800)]
Pull context-bitmap into release branch

19 years agoPull extend-notify-die into release branch
Tony Luck [Thu, 10 Nov 2005 18:39:09 +0000 (10:39 -0800)]
Pull extend-notify-die into release branch

19 years agoPull memoryless-node-allocation into release branch
Tony Luck [Thu, 10 Nov 2005 18:38:41 +0000 (10:38 -0800)]
Pull memoryless-node-allocation into release branch

19 years agoPull mca-check-psp into release branch
Tony Luck [Thu, 10 Nov 2005 18:38:05 +0000 (10:38 -0800)]
Pull mca-check-psp into release branch

19 years agoPull align-sig-frame into release branch
Tony Luck [Thu, 10 Nov 2005 18:37:35 +0000 (10:37 -0800)]
Pull align-sig-frame into release branch

19 years ago[IB] umad: further ib_unregister_mad_agent() deadlock fixes
Roland Dreier [Thu, 10 Nov 2005 18:18:23 +0000 (10:18 -0800)]
[IB] umad: further ib_unregister_mad_agent() deadlock fixes

The previous umad deadlock fix left ib_umad_kill_port() still
vulnerable to deadlocking.  This patch fixes that by downgrading our
lock to a read lock when we might end up trying to reacquire the lock
for reading.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] mthca: fix posting long lists of receive work requests
Michael S. Tsirkin [Wed, 9 Nov 2005 22:59:57 +0000 (14:59 -0800)]
[IB] mthca: fix posting long lists of receive work requests

In Tavor mode, when posting a long list of receive work requests, a
doorbell must be rung every 256 requests.  Add code to do this when
required.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] mthca: fix wraparound handling in mthca_cq_clean()
Roland Dreier [Wed, 9 Nov 2005 20:23:17 +0000 (12:23 -0800)]
[IB] mthca: fix wraparound handling in mthca_cq_clean()

Handle case where prod_index has wrapped around and become less than
cq->cons_index by checking that their difference as a signed int is
positive rather than comparing directly.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] mthca: fix posting of atomic operations
Michael S. Tsirkin [Wed, 9 Nov 2005 19:30:14 +0000 (11:30 -0800)]
[IB] mthca: fix posting of atomic operations

The size of work requests for atomic operations was computed
incorrectly in mthca: all sizeofs need to be divided by 16.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] uverbs: have kernel return QP capabilities
Jack Morgenstein [Wed, 9 Nov 2005 19:26:07 +0000 (11:26 -0800)]
[IB] uverbs: have kernel return QP capabilities

Move the computation of QP capabilities (max scatter/gather entries,
max inline data, etc) into the kernel, and have the uverbs module
return the values as part of the create QP response.  This keeps
precise knowledge of device limits in the low-level kernel driver.

This requires an ABI bump, so while we're making changes, get rid of
the max_sge parameter for the modify SRQ command -- it's not used and
shouldn't be there.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] umad: get rid of unused mr array
Roland Dreier [Wed, 9 Nov 2005 17:58:10 +0000 (09:58 -0800)]
[IB] umad: get rid of unused mr array

Now that ib_umad uses the new MAD sending interface, it no longer
needs its own L_Key.  So just delete the array of MRs that it keeps.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] Have cq_resize() method take an int, not int*
Roland Dreier [Tue, 8 Nov 2005 19:10:25 +0000 (11:10 -0800)]
[IB] Have cq_resize() method take an int, not int*

Change the struct ib_device.resize_cq() method to take a plain integer
that holds the new CQ size, rather than a pointer to an integer that
it uses to return the new size.  This makes the interface match the
exported ib_resize_cq() signature, and allows the low-level driver to
update the CQ size with proper locking if necessary.

No in-tree drivers are exporting this method yet.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] mthca: fix typo in catastrophic error polling
Roland Dreier [Tue, 8 Nov 2005 06:01:02 +0000 (22:01 -0800)]
[IB] mthca: fix typo in catastrophic error polling

Fix a typo in the rearming of the catastrophic error polling timer: we
should rearm the timer as long as the stop flag is _not_ set.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IPoIB] no need to set skb->dev right before freeing skb
Roland Dreier [Mon, 7 Nov 2005 18:49:38 +0000 (10:49 -0800)]
[IPoIB] no need to set skb->dev right before freeing skb

For cut-and-paste reasons, the IPoIB driver was setting skb->dev right
before calling dev_kfree_skb_any().  Get rid of this.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IB] umad: avoid potential deadlock when unregistering MAD agents
Roland Dreier [Mon, 7 Nov 2005 18:41:29 +0000 (10:41 -0800)]
[IB] umad: avoid potential deadlock when unregistering MAD agents

ib_unregister_mad_agent() completes all pending MAD sends and waits
for the agent's send_handler routine to return.  umad's send_handler()
calls queue_packet(), which does down_read() on the port mutex to look
up the agent ID.  This means that the port mutex cannot be held for
writing while calling ib_unregister_mad_agent(), or else it will
deadlock.  This patch fixes all the calls to ib_unregister_mad_agent()
in the umad module to avoid this deadlock.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years ago[IPoIB] add path record information in debugfs
Roland Dreier [Mon, 7 Nov 2005 18:33:11 +0000 (10:33 -0800)]
[IPoIB] add path record information in debugfs

Add ibX_path files to debugfs that contain information about the IPoIB
path cache.  IPoIB ARP only gives GIDs, which the IPoIB driver must
resolve to real IB paths through the ib_sa module.  For debugging,
when the ARP table looks OK but traffic isn't flowing, it's useful to
be able to see if the resolution from GID to path worked.

Also clean up the formatting of the existing _mcg debugfs files.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 10 Nov 2005 18:17:11 +0000 (10:17 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[PATCH] Don't auto-reap traced children
Oleg Nesterov [Thu, 10 Nov 2005 14:22:18 +0000 (17:22 +0300)]
[PATCH] Don't auto-reap traced children

If a task is being traced we never auto-reap it even if it might look
like its parent doesn't care. The tracer obviously _does_ care.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6
Linus Torvalds [Thu, 10 Nov 2005 17:48:34 +0000 (09:48 -0800)]
Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6

19 years ago[ARM] 3098/1: pxa2xx disable ssp irq
Liam Girdwood [Thu, 10 Nov 2005 17:45:39 +0000 (17:45 +0000)]
[ARM] 3098/1: pxa2xx disable ssp irq

Patch from Liam Girdwood

This patch allows users of the pxa SSP driver to register their own irq
handlers instead of using the default SSP handler. It also cleans up the
CKEN clock and irq detection as the values are now stored in a table.

This patch replaces 2845/1

Changes:-
o Added flags parameter to ssp_init()
o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for
drivers that want to register their own handler)
o Cleaned up clock and irq detection, values are now stored in table.
o Added build changes to allow other drivers (e.g audio) to select the
ssp driver.
o corgi_ssp.c changed to use new interface.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver
Richard Purdie [Thu, 10 Nov 2005 17:42:29 +0000 (17:42 +0000)]
[ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver

Patch from Richard Purdie

This patch adds a power and battery management core driver which with
the addition of the right device files, supports the c7x0 and cxx00
series of Sharp Zaurus handhelds.

The driver is complex for several reasons. Battery charging is manually
monitored and controlled. When suspended, the device needs to
periodically partially resume, check the charging status and then
re-suspend. It does without bothering the higher linux layers as
a full resume and re-suspend is unnecessary. The code is carefully
written to avoid interrupts or calling code outside the module under
these circumstances. It also vets the various wake up sources and
monitors the device's power situation.

Hooks to limit the backlight intensity and to notify the battery
monitoring code of backlight events are connected/added as the
backlight is one of the biggest users of power on the device.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Linus Torvalds [Thu, 10 Nov 2005 15:37:51 +0000 (07:37 -0800)]
Merge git://git./linux/kernel/git/paulus/powerpc-merge

19 years ago[ARM] 3144/1: OMAP 5/5: Update omap H2 defconfig
Tony Lindgren [Thu, 10 Nov 2005 14:26:54 +0000 (14:26 +0000)]
[ARM] 3144/1: OMAP 5/5: Update omap H2 defconfig

Patch from Tony Lindgren

This patch updates omap H2 defconfig.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3143/1: OMAP 4/5: Update omap include files
Tony Lindgren [Thu, 10 Nov 2005 14:26:53 +0000 (14:26 +0000)]
[ARM] 3143/1: OMAP 4/5: Update omap include files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.

This patch contains changes to common header files for
omap1xxx and omap24xx by various omap developers, and
improved cpu detection by Imre Deak

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3146/1: OMAP 3b/5: Add omap24xx clock framework
Tony Lindgren [Thu, 10 Nov 2005 14:26:52 +0000 (14:26 +0000)]
[ARM] 3146/1: OMAP 3b/5: Add omap24xx clock framework

Patch from Tony Lindgren

This patch adds omap24xx specific clock code by
Richard Woodruff, Nishant Menon, Tony Lindgren et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx
Tony Lindgren [Thu, 10 Nov 2005 14:26:51 +0000 (14:26 +0000)]
[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

Patch from Tony Lindgren

This patch adds support for omap24xx series of processors.
The files live in arch/arm/mach-omap2, and share common
files with omap15xx and omap16xx processors in
arch/arm/plat-omap.

Omap24xx support was originally added for 2.6.9 by TI.
This code was then improved and integrated to share common
code with omap15xx and omap16xx processors by various
omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak,
Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah
et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2
Tony Lindgren [Thu, 10 Nov 2005 14:26:50 +0000 (14:26 +0000)]
[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Serial port and framebuffer init improvments by Imre Deak

- Common omap pin mux framework by Tony Lindgren

- Common omap clock framework by Tony Lindren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3141/1: OMAP 1/5: Update omap1 specific files
Tony Lindgren [Thu, 10 Nov 2005 14:26:48 +0000 (14:26 +0000)]
[ARM] 3141/1: OMAP 1/5: Update omap1 specific files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Omap1 serial pport and framebuffer init updates by Imre Deak

- Add support for omap310 processor and Palm Tungsten E PDA
  by Laurent Gonzales, Romain Goyet, et al. Omap310 and
  omap1510 processors are now handled as omap15xx.

- Omap1 specific changes to shared omap clock framework
  by Tony Lindgren

- Omap1 specific changes to shared omap pin mux framework
  by Tony Lindgren

- Other misc fixes, such as update memory timings for smc91x,
  omap1 specific device initialization etc.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3140/1: NSLU2 machine support
Alessandro Zummo [Thu, 10 Nov 2005 14:05:04 +0000 (14:05 +0000)]
[ARM] 3140/1: NSLU2 machine support

Patch from Alessandro Zummo

This patch adds support for the LinkSys NSLU2 running with
both big and little-endian kernels. The LinkSys NSLU2 is
a cost engineered ARM, XScale 420 based system similar to
the the Intel IXDP425 evaluation board. It uses the
IXP4XX ARCH.

While this patch applies independently of other patches
the resultant kernel requires further patches to successfully
use onboard devices, including the onboard flash. Since these
patches are independent of this one they will be submitted
separately.

A defconfig is not included here because not all of
the required drivers are actually in the kernel.
We intend to provide one as soon as the patches
will be incorporated in mainstream.

This patch is the combined work of nslu2-linux.org

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] Fix csumpartial corner case
Russell King [Thu, 10 Nov 2005 11:40:53 +0000 (11:40 +0000)]
[ARM] Fix csumpartial corner case

Ji-In Park discovered a bug in csumpartial which caused wrong
checksums with misaligned buffers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PCMCIA] i82365: release all resources if no devices are found
Igor Popik [Thu, 6 Oct 2005 18:32:58 +0000 (20:32 +0200)]
[PCMCIA] i82365: release all resources if no devices are found

The i82365 driver does not release all the resources when the device is not
found. This can cause an oops when reading /proc/ioports after module
unload.

Signed-off-by: Igor Popik <igor.popik@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
19 years ago[PCMCIA] MPC8xx PCMCIA update
Marcelo Tosatti [Sat, 5 Nov 2005 15:03:32 +0000 (13:03 -0200)]
[PCMCIA] MPC8xx PCMCIA update

Kconfig entry: dependency on 8xx
Makefile: fix whitespace breakage
m8xx_pcmcia.c:
- asm/segment.h is gone
- use generic PCMCIA suspend/resume methods

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
19 years ago[PATCH] Alchemy PCMCIA: Fix config.h inclusion
Ralf Baechle [Wed, 2 Nov 2005 18:08:40 +0000 (18:08 +0000)]
[PATCH] Alchemy PCMCIA: Fix config.h inclusion

Add rsp. remove the inclusion of <linux/config.h> as needed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>