GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
17 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 11 Jun 2007 18:41:00 +0000 (11:41 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix smp barriers in test_and_{change,clear,set}_bit
  [MIPS] Fix IP27 build
  [MIPS] Fix modpost warnings by making start_secondary __cpuinit
  [MIPS] SMTC: Fix build error caused by nonsense code.
  [MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired.
  [MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments.
  [MIPS] SMTC: Fix warning.
  [MIPS] Wire up utimensat, signalfd, timerfd, eventfd
  [MIPS] Atlas: Fix build.
  [MIPS] Always install the DSP exception handler.
  [MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi.
  [MIPS] Fix KMODE for the R3000

17 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 11 Jun 2007 18:39:25 +0000 (11:39 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] CIFS should honour umask
  [CIFS] Missing flag on negprot needed for some servers to force packet signing
  [CIFS] whitespace cleanup part 2
  [CIFS] whitespace cleanup
  [CIFS] fix mempool destroy done in wrong order in cifs error path
  [CIFS] typo in previous patch
  [CIFS] Fix oops on failed cifs mount (in kthread_stop)

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Mon, 11 Jun 2007 18:39:05 +0000 (11:39 -0700)]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] intel_agp: Add support for G33, Q33 and Q35 chipsets
  [AGPGART] intel_agp: add support for 945GME
  [AGPGART] intel_agp: add support for 965GME/GLE
  [AGPGART] intel_agp: use table for device probe
  [AGPGART] intel_agp: cleanup intel private data

17 years agoMerge branch 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 11 Jun 2007 18:38:14 +0000 (11:38 -0700)]
Merge branch 'linus-plus-plus' of /linux/kernel/git/jgarzik/libata-dev

* 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: limit post SRST nsect/lbal wait to ~100ms
  libata: force PIO on IOMEGA ZIP 250 ATAPI
  libata passthru: update cached device paramters
  libata passthru: always enforce correct DEV bit
  libata passthru: map UDMA protocols
  libata passthru: support PIO multi commands
  libata passthru: update protocol numbers
  libata: Correct abuse of language
  libata-core/sff: Fix multiple assumptions about DMA
  ahci: Add MCP73/MCP77 support to AHCI driver
  libata: fix hw_sata_spd_limit initialization
  libata: print device model and firmware revision for ATAPI devices
  libata: fix probe time irq printouts
  libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP
  remove unused variable in pata_isapnp

17 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 11 Jun 2007 18:32:28 +0000 (11:32 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/mchehab/v4l-dvb

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5751): Ivtv: fix ia64 printk format warnings.
  V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures
  V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode.
  V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA
  V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output.
  V4L/DVB (5730): Remove unused V4L2_CAP_VIDEO_OUTPUT_POS
  V4L/DVB (5720): Usbvision: fix urb allocation and submits
  V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values
  V4L/DVB (5675): Move big PIO accesses from the interrupt handler to a workhandler
  V4L/DVB (5699): Cinergyt2: fix file release handler
  V4L/DVB (5700): Saa7111: fix picture settings cache bug
  V4L/DVB (5702): Fix Kconfig items to avoid linkedition errors

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 11 Jun 2007 18:31:43 +0000 (11:31 -0700)]
Merge /pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: Add the MCP73/77 support to PATA driver
  Add the PATA controller device ID to pci_ids.h for MCP73/MCP77.
  hpt366: disallow Ultra133 for HPT374
  ide: generic IDE PCI driver, add another device exception
  ide: HPA detect from resume
  it821x: RAID mode fixes
  serverworks: fix CSB6 tuning logic
  serverworks: remove crappy code

17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Mon, 11 Jun 2007 18:31:18 +0000 (11:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: don't call switch on old cards
  mmc: fix broken if clause
  au1xmmc: Replace C code with call to ARRAY_SIZE() macro.
  mmc-atmel: remove linux/mmc/protocol.h dependencies

17 years agoMerge branch 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Mon, 11 Jun 2007 18:31:05 +0000 (11:31 -0700)]
Merge branch 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block

* 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
  splice: __generic_file_splice_read: fix read/truncate race
  splice: __generic_file_splice_read: fix i_size_read() length checks
  splice: move balance_dirty_pages_ratelimited() outside of splice actor
  pipe: move pipe_inode_info structure decleration up before it's used
  splice: remove do_splice_direct() symbol export
  splice: move inode size check into generic_file_splice_read()

17 years ago[MIPS] Fix smp barriers in test_and_{change,clear,set}_bit
Ralf Baechle [Thu, 7 Jun 2007 12:17:30 +0000 (13:17 +0100)]
[MIPS] Fix smp barriers in test_and_{change,clear,set}_bit

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Fix IP27 build
Atsushi Nemoto [Fri, 1 Jun 2007 14:40:59 +0000 (23:40 +0900)]
[MIPS] Fix IP27 build

IP27 does no longer have ZONE_DMA.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Fix modpost warnings by making start_secondary __cpuinit
Ralf Baechle [Thu, 31 May 2007 15:15:01 +0000 (16:15 +0100)]
[MIPS] Fix modpost warnings by making start_secondary __cpuinit

WARNING: arch/mips/kernel/built-in.o(.text+0x9a58): Section mismatch: reference to .init.text:cpu_report (between 'start_secondary' and 'smp_prepare_boot_cpu')
WARNING: arch/mips/kernel/built-in.o(.text+0x9a60): Section mismatch: reference to .init.text:per_cpu_trap_init (between 'start_secondary' and 'smp_prepare_boot_cpu')
WARNING: arch/mips/kernel/built-in.o(.text+0x9adc): Section mismatch: reference to .init.text:cpu_probe (between 'start_secondary' and 'smp_prepare_boot_cpu')
mipsel-linux-objcopy -S -O srec --remove-section=.reginfo --remove-section=.mdebug --remove-section=.comment --remove-section=.note --remove-section=.pdr --remove-section=.options --remove-section=.MIPS.options vmlinux arch/mips/boot/vmlinux.srec

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] SMTC: Fix build error caused by nonsense code.
Chris Dearman [Tue, 29 May 2007 19:01:55 +0000 (20:01 +0100)]
[MIPS] SMTC: Fix build error caused by nonsense code.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired.
Ralf Baechle [Thu, 31 May 2007 13:03:45 +0000 (14:03 +0100)]
[MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments.
Ralf Baechle [Thu, 31 May 2007 13:00:19 +0000 (14:00 +0100)]
[MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] SMTC: Fix warning.
Ralf Baechle [Thu, 31 May 2007 12:36:57 +0000 (13:36 +0100)]
[MIPS] SMTC: Fix warning.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Wire up utimensat, signalfd, timerfd, eventfd
Atsushi Nemoto [Tue, 29 May 2007 14:29:40 +0000 (23:29 +0900)]
[MIPS] Wire up utimensat, signalfd, timerfd, eventfd

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Atlas: Fix build.
Ralf Baechle [Fri, 25 May 2007 14:46:38 +0000 (15:46 +0100)]
[MIPS] Atlas: Fix build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Always install the DSP exception handler.
Chris Dearman [Thu, 24 May 2007 21:30:18 +0000 (22:30 +0100)]
[MIPS] Always install the DSP exception handler.

Some non-DSP enabled cores 24K / 34K can generate a DSP exception where they
are actually expected to produce a reserved instruction exception.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi.
Ralf Baechle [Thu, 24 May 2007 13:56:58 +0000 (14:56 +0100)]
[MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi.

This did corrupt register s0 which the caller of self_ipi expects to
be unchanged.  This is a kernel bug which will only be triggered with
the compilers which compile __smtc_ipi_replay to use s0 across the
invocation of self_ipi. Gcc 4.1.2 does this, for example.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years ago[MIPS] Fix KMODE for the R3000
Maciej W. Rozycki [Mon, 21 May 2007 12:47:22 +0000 (13:47 +0100)]
[MIPS] Fix KMODE for the R3000

 This must be the oldest bug that we have got.  Leaving interrupts "as
they are" for the R3000 obviously means copying IEp to IEc.  Since we have
got STATMASK now, I took this opportunity to mask the status register
"correctly" for the R3000 now too.  Oh, and the R3000 hardly ever is
64-bit.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
17 years agolibata: limit post SRST nsect/lbal wait to ~100ms
Tejun Heo [Sun, 10 Jun 2007 05:26:20 +0000 (14:26 +0900)]
libata: limit post SRST nsect/lbal wait to ~100ms

After SRST, libata used to wait for nsect/lbal to be set to 1/1 for
the slave device.  However, some ATAPI devices don't set nsect/lbal
after SRST and the wait itself isn't too useful as we're gonna wait
for !BSY right after that anyway.

Before reset-seq update, nsect/lbal wait failure used to be ignored
and caused 30sec delay during detection.  After reset-seq, all
timeouts are considered error conditions making libata fail to detect
such ATAPI devices.

This patch limits nsect/lbal wait to around 100ms.  This should give
acceptable behavior to such ATAPI devices while not disturbing the
heavily used code path too much.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: force PIO on IOMEGA ZIP 250 ATAPI
Tejun Heo [Sun, 10 Jun 2007 05:52:36 +0000 (14:52 +0900)]
libata: force PIO on IOMEGA ZIP 250 ATAPI

IOMEGA ZIP 250 ATAPI claims MWDMA0 support but fails SETXFERMODE if
asked to configure itself to MWDMA0.  Force PIO.

This fixes bugzilla bug#8497.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Calvin Walton <calvin.walton@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata passthru: update cached device paramters
Albert Lee [Thu, 7 Jun 2007 08:01:17 +0000 (16:01 +0800)]
libata passthru: update cached device paramters

INIT_DEV_PARAMS and SET_MULTI_MODE change the device parameters cached
by libata.  Re-read IDENTIFY DEVICE info and update the cached device
paramters when seeing these commands.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata passthru: always enforce correct DEV bit
Albert Lee [Thu, 7 Jun 2007 07:52:07 +0000 (15:52 +0800)]
libata passthru: always enforce correct DEV bit

 Always enforce correct DEV bit since we know which drive the command
is targeted. SAT demands to ignore the DEV bit, too.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata passthru: map UDMA protocols
Albert Lee [Thu, 7 Jun 2007 07:50:44 +0000 (15:50 +0800)]
libata passthru: map UDMA protocols

 Map the ATA passthru UDMA protocols to ATA_PROT_DMA.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata passthru: support PIO multi commands
Albert Lee [Thu, 7 Jun 2007 07:49:22 +0000 (15:49 +0800)]
libata passthru: support PIO multi commands

  support the pass through of PIO multi commands.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata passthru: update protocol numbers
Albert Lee [Thu, 7 Jun 2007 07:47:13 +0000 (15:47 +0800)]
libata passthru: update protocol numbers

 Update the ATA passthru protocol numbers according to the new spec.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: Correct abuse of language
Alan Cox [Thu, 7 Jun 2007 15:13:55 +0000 (16:13 +0100)]
libata: Correct abuse of language

The controller is not reporting an unlawful type, it is reporting an
invalid type. Illegal specifically means "prohibited by law"

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata-core/sff: Fix multiple assumptions about DMA
Alan Cox [Thu, 7 Jun 2007 15:19:15 +0000 (16:19 +0100)]
libata-core/sff: Fix multiple assumptions about DMA

The ata IRQ ack functions are only used when debugging. Unfortunately
almost every controller that calls them can cause crashes in some
configurations as there are missing checks for bmdma presence.

In addition ata_port_start insists of installing DMA buffers and pad
buffers for controllers regardless. The SFF controllers actually need to
make that decision dynamically at controller setup time and all need the
same helper - so we add ata_sff_port_start. Future patches will switch
the SFF drivers to use this.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoahci: Add MCP73/MCP77 support to AHCI driver
Peer Chen [Thu, 7 Jun 2007 10:05:12 +0000 (18:05 +0800)]
ahci: Add MCP73/MCP77 support to AHCI driver

Add the MCP73/MCP77 support to ahci driver.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: fix hw_sata_spd_limit initialization
Tejun Heo [Wed, 6 Jun 2007 07:35:55 +0000 (16:35 +0900)]
libata: fix hw_sata_spd_limit initialization

hw_sata_spd_limit used to be incorrectly initialized to zero instead
of UINT_MAX if SPD is zero in SControl register.  This breaks PHY
speed down.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: print device model and firmware revision for ATAPI devices
Albert Lee [Tue, 5 Jun 2007 05:01:33 +0000 (13:01 +0800)]
libata: print device model and firmware revision for ATAPI devices

  For ATA/CFA devices, libata prints out the device model and firmware revision.
Do the same for ATAPI devices.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: fix probe time irq printouts
Olof Johansson [Sun, 3 Jun 2007 23:35:10 +0000 (18:35 -0500)]
libata: fix probe time irq printouts

Most drivers don't seem to fill out the host->irq field, resulting in the
wrong (no) irq being reported at probe time. For example, sil24 on my system:

ata1: SATA max UDMA/100 cmd 0xd00008009001f000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0
ata2: SATA max UDMA/100 cmd 0xd000080090021000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0

Since they're allocated and set up in ata_host_activate(), just save
them away there.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolibata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP
Tejun Heo [Fri, 8 Jun 2007 13:20:59 +0000 (22:20 +0900)]
libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP

HITACHI HTS541680J9SA00/SB21C7EP spuriously completes NCQ commands.
Blacklist it for NCQ.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove unused variable in pata_isapnp
Yoichi Yuasa [Tue, 5 Jun 2007 13:33:29 +0000 (22:33 +0900)]
remove unused variable in pata_isapnp

This patch has removed unused variable in pata_ispnp.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Sat, 9 Jun 2007 02:44:16 +0000 (19:44 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Fix invalid assertion during write on 64k pages
  ocfs2: Fix masklog breakage

17 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 9 Jun 2007 01:15:49 +0000 (18:15 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine.
  [NetLabel]: consolidate the struct socket/sock handling to just struct sock
  [IPV4]: Do not remove idev when addresses are cleared

17 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 9 Jun 2007 01:15:23 +0000 (18:15 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Handle PCI bridges without 'ranges' property.
  [SPARC64]: Include <linux/rwsem.h> instead of <asm/rwsem.h>.

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Sat, 9 Jun 2007 01:14:42 +0000 (18:14 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  OHCI: Fix machine check in ohci_hub_status_data
  USB: Fix up bogus bInterval values in endpoint descriptors
  USB: cxacru: ignore error trying to start ADSL in atm_start
  USB: cxacru: create sysfs attributes in atm_start instead of bind
  USB: cxacru: add Documentation file
  USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu
  USB: usb gadgets avoid le{16,32}_to_cpup()
  usblp: Don't let suspend to kill ->used
  USB: set default y for CONFIG_USB_DEVICE_CLASS

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Sat, 9 Jun 2007 01:11:47 +0000 (18:11 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  firmware: remove orphaned Email
  kobject: use the proper printk level for kobject error
  Driver core: kill unused code
  Driver core: keep PHYSDEV for old struct class_device
  update Documentation/driver-model/platform.txt

17 years agoProtect <linux/console_struct.h> from multiple inclusion
Robert P. J. Day [Fri, 8 Jun 2007 20:47:07 +0000 (13:47 -0700)]
Protect <linux/console_struct.h> from multiple inclusion

Prevent <linux/console_struct.h> from being included more than once,
otherwise you get a redefinition error if you happen to include
<linux/vt_kern.h> first.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoupdate checkpatch.pl to version 0.04
Andy Whitcroft [Fri, 8 Jun 2007 20:47:06 +0000 (13:47 -0700)]
update checkpatch.pl to version 0.04

This version brings a some new tests, and a host of changes to fix
false positives, of particular note:

  - check for and report #if 0
  - extend checking of line lengths and spacing for .pl, .sh etc
  - extends the pointer type checks to multiple levels
  - updates printk handling to track newlines
  - adds a wrapped patch detector
  - drops the leading component of the filenames
  - extends switch indent handling to switch statmentes rooted in
    the context
  - adds foo * bar single pointer checks

This version of checkpatch.pl can be found at the following URL:

      http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.04

Full Changelog:

Andy Whitcroft (16):
      allow checking line lengths and spacing on other source files
      clean up that whitespace
      sanitise the input line standardising the content of quotes
      clean up pointer type * and space checks
      fix up the sanitiser so it maintains the line length
      apply the printk facility checks only to the first printk in a set
      switch/case indent checks may anchor in the context
      add a wrapped patch detector
      put the #ifdef in C file checks on ice
      asm volatile is acceptable
      check for and report #if 0
      drop the leading component of the filename as patches are -p1
      use the original line when reporting operator errors
      correct spelling of Joel's name
      Version: 0.04
      add support for struct foo * bar checks

Geert Uytterhoeven (1):
      Fix checkpatch.pl name in usage template

Randy Dunlap (1):
      checkpatch: produce fewer lines of output

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agohexdump: more output formatting
Randy Dunlap [Fri, 8 Jun 2007 20:47:04 +0000 (13:47 -0700)]
hexdump: more output formatting

Add a prefix string parameter.  Callers are responsible for any string
length/alignment that they want to see in the output.  I.e., callers should
pad strings to achieve alignment if they want that.

Add rowsize parameter.  This is the number of raw data bytes to be printed
per line.  Must be 16 or 32.

Add a groupsize parameter.  This allows callers to dump values as 1-byte,
2-byte, 4-byte, or 8-byte numbers.  Default is 1-byte numbers.  If the
total length is not an even multiple of groupsize, 1-byte numbers are
printed.

Add an "ascii" output parameter.  This causes ASCII data output following
the hex data output.

Clean up some doc examples.

Align the ASCII output on all lines that are produced by one call.

Add a new interface, print_hex_dump_bytes(), that is a shortcut to
print_hex_dump(), using default parameter values to print 16 bytes in
byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMAINTAINERS: corrections
Alan Cox [Fri, 8 Jun 2007 20:47:03 +0000 (13:47 -0700)]
MAINTAINERS: corrections

The UFS entry was misformatted
The NEC V850 links are all broken
The Berkshire watchdog links are all broken

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agocheckpatch: produce fewer lines of output
Randy Dunlap [Fri, 8 Jun 2007 20:47:03 +0000 (13:47 -0700)]
checkpatch: produce fewer lines of output

Produce one less line of output per flagged incident.

Change this:

use tabs not spaces
PATCH: /home/rddunlap/arcmsr1200014.patch4:756:
FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843:
+                     return PCI_ERS_RESULT_NEED_RESET;$

to this:

use tabs not spaces
#756: FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843:
+                     return PCI_ERS_RESULT_NEED_RESET;$

Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoreiserfs: mailing list has moved
Jeff Mahoney [Fri, 8 Jun 2007 20:47:02 +0000 (13:47 -0700)]
reiserfs: mailing list has moved

This patch changes MAINTAINERS to reflect the new location of the reiserfs
development mailing list.  The old list forwards to the new one.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86_64: oops_begin() fix
Andrew Morton [Fri, 8 Jun 2007 20:47:01 +0000 (13:47 -0700)]
x86_64: oops_begin() fix

We don't want to see this:

>  BUG: using smp_processor_id() in preemptible [00000001] code: bash/3857
>  caller is oops_begin+0xb/0x6f
>
>  Call Trace:
>  [<ffffffff8020ab4d>] show_trace+0x34/0x4f
>  [<ffffffff8020ab7a>] dump_stack+0x12/0x17
>  [<ffffffff8030d92d>] debug_smp_processor_id+0xad/0xbc
>  [<ffffffff8042388f>] oops_begin+0xb/0x6f
>  [<ffffffff8042520b>] do_page_fault+0x66a/0x7c0
>  [<ffffffff804234bd>] error_exit+0x0/0x84
>

coming out when the kernel is trying to oops.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofix sysrq-m oops
Bob Picco [Fri, 8 Jun 2007 20:47:00 +0000 (13:47 -0700)]
fix sysrq-m oops

We aren't sampling for holes in memory.  Thus we encounter a section hole
with empty section map pointer for SPARSEMEM and OOPs for show_mem.  This
issue has been seen in 2.6.21, current git and current mm.  The patch below
is for mainline and mm.  It was boot tested for SPARSEMEM, current VMEMMAP
of Andy's in mm ml and DISCONTIGMEM.  A slightly different patch will be
posted to stable for 2.6.21.

Previous to commit f0a5a58aa812b31fd9f197c4ba48245942364eae memory_present
was called for node_start_pfn to node_end_pfn.  This would cover the
hole(s) with reserved pages and valid sections.  Most SPARSEMEM supported
arches do a pfn_valid check in show_mem before computing the page structure
address.

This issue was brought to my attention on IRC by Arnaldo Carvalho de Melo.
Thanks to Arnaldo for testing.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopi-futex: fix exit races and locking problems
Alexey Kuznetsov [Fri, 8 Jun 2007 20:47:00 +0000 (13:47 -0700)]
pi-futex: fix exit races and locking problems

1. New entries can be added to tsk->pi_state_list after task completed
   exit_pi_state_list(). The result is memory leakage and deadlocks.

2. handle_mm_fault() is called under spinlock. The result is obvious.

3. results in self-inflicted deadlock inside glibc.
   Sometimes futex_lock_pi returns -ESRCH, when it is not expected
   and glibc enters to for(;;) sleep() to simulate deadlock. This problem
   is quite obvious and I think the patch is right. Though it looks like
   each "if" in futex_lock_pi() got some stupid special case "else if". :-)

4. sometimes futex_lock_pi() returns -EDEADLK,
   when nobody has the lock. The reason is also obvious (see comment
   in the patch), but correct fix is far beyond my comprehension.
   I guess someone already saw this, the chunk:

                        if (rt_mutex_trylock(&q.pi_state->pi_mutex))
                                ret = 0;

   is obviously from the same opera. But it does not work, because the
   rtmutex is really taken at this point: wake_futex_pi() of previous
   owner reassigned it to us. My fix works. But it looks very stupid.
   I would think about removal of shift of ownership in wake_futex_pi()
   and making all the work in context of process taking lock.

From: Thomas Gleixner <tglx@linutronix.de>

Fix 1) Avoid the tasklist lock variant of the exit race fix by adding
    an additional state transition to the exit code.

    This fixes also the issue, when a task with recursive segfaults
    is not able to release the futexes.

Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH
    problem finally.

Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup
    in the lock protected section by using the in_atomic userspace access
    functions.

    This removes also the ugly lock drop / unqueue inside of fixup_pi_state()

Fix 4) Fix a stale lock in the error path of futex_wake_pi()

Added some error checks for verification.

The -EDEADLK problem is solved by the rtmutex fixups.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agort-mutex: fix chain walk early wakeup bug
Thomas Gleixner [Fri, 8 Jun 2007 20:46:58 +0000 (13:46 -0700)]
rt-mutex: fix chain walk early wakeup bug

Alexey Kuznetsov found some problems in the pi-futex code.

One of the root causes is:

When a wakeup happens, we do not to stop the chain walk so we follow a not
longer relevant locking chain.

Drop out when this happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agort-mutex: fix stale return value
Thomas Gleixner [Fri, 8 Jun 2007 20:46:57 +0000 (13:46 -0700)]
rt-mutex: fix stale return value

Alexey Kuznetsov found some problems in the pi-futex code.

The major problem is a stale return value in rt_mutex_slowlock():

When the pi chain walk returns -EDEADLK, but the waiter was woken up during
the phases where the locks were dropped, the rtmutex could be acquired, but
due to the stale return value -EDEADLK returned to the caller.

Reset the return value in the retry path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agosata_promise: use TF interface for polling NODATA commands
Tejun Heo [Fri, 8 Jun 2007 20:46:55 +0000 (13:46 -0700)]
sata_promise: use TF interface for polling NODATA commands

sata_promise uses two different command modes - packet and TF.  Packet mode
is intelligent low-overhead mode while TF is the same old taskfile
interface.  As with other advanced interface (ahci/sil24),
ATA_TFLAG_POLLING has no effect in packet mode.  However, PIO commands are
issued using TF interface in polling mode, so pdc_interrupt() considers
interrupts spurious if ATA_TFLAG_POLLING is set.

This is broken for polling NODATA commands because command is issued using
packet mode but the interrupt handler ignores it due to ATA_TFLAG_POLLING.
Fix pdc_qc_issue_prot() such that ATA/ATAPI NODATA commands are issued
using TF interface if ATA_TFLAG_POLLING is set.

This patch fixes detection failure introduced by polling SETXFERMODE.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoisdn/diva: fix section mismatch
Randy Dunlap [Fri, 8 Jun 2007 20:46:54 +0000 (13:46 -0700)]
isdn/diva: fix section mismatch

__exit function is used by both init and exit routines, so it cannot
be marked __init.  (from allyesconfig)

WARNING: drivers/built-in.o(.text+0x9b83cf): Section mismatch: reference to .exit.text: (between 'divasfunc_exit' and 'didd_callback')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Karsten Keil <kkeil@suse.de>
Acked-by: Armin Schindler <armin@melware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouml: get declaration of simple_strtoul
Jeff Dike [Fri, 8 Jun 2007 20:46:54 +0000 (13:46 -0700)]
uml: get declaration of simple_strtoul

Include linux/kernel.h wherever simple_strtoul is used.  This kills a
compile warning in stderr_console.c and potential ones in the other files.

This also fixes a bunch of style violations in exitcode.c.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoChar: stallion, proper fail return values
Jiri Slaby [Fri, 8 Jun 2007 20:46:53 +0000 (13:46 -0700)]
Char: stallion, proper fail return values

do not return 0 in one case and return proper values in other 2.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoChar: stallion, alloc tty before pci devices init
Jiri Slaby [Fri, 8 Jun 2007 20:46:52 +0000 (13:46 -0700)]
Char: stallion, alloc tty before pci devices init

this causes oops, because pci probe function calls tty_register_device for
each device found. Thanks to Ingo.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: "Ingo Korb" <ingo@akana.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoChar: stallion, don't fail with less than max panels
Jiri Slaby [Fri, 8 Jun 2007 20:46:52 +0000 (13:46 -0700)]
Char: stallion, don't fail with less than max panels

Since it's not neccesary to have MAX_PANELS on the card, don't fail to let
users use this card even in this case.  Stop the testing for loop instead.

Thanks to Ingo.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: "Ingo Korb" <ingo@akana.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMove three functions that are only needed for CONFIG_MEMORY_HOTPLUG
Stephen Rothwell [Fri, 8 Jun 2007 20:46:51 +0000 (13:46 -0700)]
Move three functions that are only needed for CONFIG_MEMORY_HOTPLUG

into the appropriate #ifdef.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoDocumentation/atomic_ops.txt typo fix
Ratnadeep Joshi [Fri, 8 Jun 2007 20:46:50 +0000 (13:46 -0700)]
Documentation/atomic_ops.txt typo fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouml: fix kernel stack size on x86_64
Jeff Dike [Fri, 8 Jun 2007 20:46:49 +0000 (13:46 -0700)]
uml: fix kernel stack size on x86_64

Force KERNEL_STACK_ORDER to be at least 1 on UML/x86_64, to avoid overflows.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoSLUB: return ZERO_SIZE_PTR for kmalloc(0)
Christoph Lameter [Fri, 8 Jun 2007 20:46:49 +0000 (13:46 -0700)]
SLUB: return ZERO_SIZE_PTR for kmalloc(0)

Instead of returning the smallest available object return ZERO_SIZE_PTR.

A ZERO_SIZE_PTR can be legitimately used as an object pointer as long as it
is not deferenced.  The dereference of ZERO_SIZE_PTR causes a distinctive
fault.  kfree can handle a ZERO_SIZE_PTR in the same way as NULL.

This enables functions to use zero sized object. e.g. n = number of objects.

objects = kmalloc(n * sizeof(object));

for (i = 0; i < n; i++)
objects[i].x = y;

kfree(objects);

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopotential parse error in ifdef part 3
Yoann Padioleau [Fri, 8 Jun 2007 20:46:48 +0000 (13:46 -0700)]
potential parse error in ifdef part 3

Fix various bits of obviously-busted code which we're not happening to
compile, due to ifdefs.

Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoslab: fix alien cache handling
Christoph Lameter [Fri, 8 Jun 2007 20:46:46 +0000 (13:46 -0700)]
slab: fix alien cache handling

cache_free_alien must be called regardless if we use alien caches or not.
cache_free_alien() will do the right thing if there are no alien caches
available.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Pekka J Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agomount -t tmpfs -o mpol=: check nodes online
Hugh Dickins [Fri, 8 Jun 2007 20:46:46 +0000 (13:46 -0700)]
mount -t tmpfs -o mpol=: check nodes online

Randy Dunlap reports that a tmpfs, mounted with NUMA mpol= specifying an
offline node, crashes as soon as data is allocated upon it.  Now restrict it
to online nodes, where before it restricted to MAX_NUMNODES.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Tested-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoupdate feature-removal-schedule.txt to include deprecated functions
Andy Whitcroft [Fri, 8 Jun 2007 20:46:45 +0000 (13:46 -0700)]
update feature-removal-schedule.txt to include deprecated functions

Now that deprecated functions are detected out of
Documentation/feature-removal-schedule.txt update this to include
kernel_thread.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agodocument Acked-by:
Andrew Morton [Fri, 8 Jun 2007 20:46:45 +0000 (13:46 -0700)]
document Acked-by:

Explain what we use Acked-by: for, and how it differs from Signed-off-by:

Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoloop: preallocate eight loop devices
Ken Chen [Fri, 8 Jun 2007 20:46:44 +0000 (13:46 -0700)]
loop: preallocate eight loop devices

The kernel on-demand loop device instantiation breaks several user space
tools as the tools are not ready to cope with the "on-demand feature".  Fix
it by instantiate default 8 loop devices and also reinstate max_loop module
parameter.

Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agonommu: report correct errno in message
Greg Ungerer [Fri, 8 Jun 2007 20:46:43 +0000 (13:46 -0700)]
nommu: report correct errno in message

Report the correct errno for out of memory debug output in binfmt_flat.c

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agom68knommu: fix ColdFire timer off by 1
Greg Ungerer [Fri, 8 Jun 2007 20:46:39 +0000 (13:46 -0700)]
m68knommu: fix ColdFire timer off by 1

The coldfire timer runs from 0 to TRR included, then 0 again and so on.  It
counts thus actually TRR + 1 steps for 1 tick, not TRR.  Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoupdate checkpatch.pl to version 0.03
Andy Whitcroft [Fri, 8 Jun 2007 20:46:39 +0000 (13:46 -0700)]
update checkpatch.pl to version 0.03

This version brings a host of changes to cure false positives and
bugs detected on patches submitted to lkml and -mm.  It also brings
a number of new tests in response to reviews, of particular note:

  - catch use of volatile
  - allow deprecated functions to be listed in feature-removal-schedule.txt
  - warn about #ifdef's in c files
  - check that spinlock_t and struct mutex use is commented
  - report on architecture specific defines being used
  - report memory barriers without an associated comment

Full changelog:

      catch use of volatile
      convert other quoted string checks to common routine
      alloc deprecated functions to be listed in feature-removal-schedule.txt
      split out the line length and indent for each line
      improve switch block handling
      handle GNU diff context lines with no leading space
      warn about #ifdef's in c files
      tidy up tests for signed-off-by using raw mode
      check that spinlock_t and struct mutex use is commented
      syntax checks for open brace placement may drop off the bottom of hunk
      report memory barriers without an associated comment
      when a sign off is present but ugly do not report it missing
      do not mistake bitfield definitions for indented labels
      report on architecture specific defines being used
      major update to the operator checks
      prevent switch/if/while etc matching foo_switch
      generify assignement in condition error message
      introduce an operator context marker
      Version: 0.03

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoOHCI: Fix machine check in ohci_hub_status_data
Alan Stern [Fri, 4 May 2007 15:57:00 +0000 (11:57 -0400)]
OHCI: Fix machine check in ohci_hub_status_data

This patch (as901) fixes an oversight in ohci-hcd.  The
hub_status_data routine must not try to access the controller's
memory-mapped registers if the controller is in a low-power state;
such attempts will cause a crash on some architectures (such as PPC).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Fix up bogus bInterval values in endpoint descriptors
Alan Stern [Fri, 8 Jun 2007 19:23:27 +0000 (15:23 -0400)]
USB: Fix up bogus bInterval values in endpoint descriptors

This patch (as904) adds code to check for endpoint descriptor bInterval
values outside the legal limits.  Illegal values are set to 32 ms, which
seems like a reasonable default.

This fixes Bugzilla #8432.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: cxacru: ignore error trying to start ADSL in atm_start
Simon Arlott [Fri, 11 May 2007 06:04:13 +0000 (23:04 -0700)]
USB: cxacru: ignore error trying to start ADSL in atm_start

The sysfs adsl_status attribute ignores (aside from returning -EIO to the
user) any error sending a START/STOP command to the device and there is at
least one firmware which never sends a response but appears to work
regardless.  Therefore atm_start should also continue if an error is received
so that such firmware is usable.

The official Conexant driver doesn't expect a reply either but this is for
another device (E2 router) and a commonly used firmware does respond.

Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing
ever checks for either of these values.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: cxacru: create sysfs attributes in atm_start instead of bind
Simon Arlott [Fri, 11 May 2007 06:04:12 +0000 (23:04 -0700)]
USB: cxacru: create sysfs attributes in atm_start instead of bind

Since usbatm doesn't set the usb_interface driver data until after calling
bind and heavy_init, it would be NULL when the sysfs attributes are read.
Reading the MAC address from atm_dev before atm_dev exists would have been
be possible too.

Calling create_device_file in atm_start will avoid this problem, and the
data is useless until the first status poll runs.  However, it must be
ready before a status poll does a printk on line status change otherwise
userspace could react before the files exist.

For completeness I've moved remove_device_file to atm_stop so it's not
called in unbind when it's not needed.  There's no point starting ADSL if
atm_start could still fail either.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: cxacru: add Documentation file
Simon Arlott [Fri, 11 May 2007 06:04:09 +0000 (23:04 -0700)]
USB: cxacru: add Documentation file

The sysfs attributes for exposing cxacru statistics/status information with
possible values is now explained in Documentation/networking/cxacru.txt
including information on the writable adsl_state attribute's commands and a
sample of the kernel log format.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu
Ben Collins [Sat, 26 May 2007 10:06:32 +0000 (03:06 -0700)]
USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu

UNUSUAL_DEV: Sync up some reported devices from Ubuntu

Various unusual dev entries accumulated from Ubuntu bug reports.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
17 years agoUSB: usb gadgets avoid le{16,32}_to_cpup()
David Brownell [Sat, 26 May 2007 03:40:14 +0000 (20:40 -0700)]
USB: usb gadgets avoid le{16,32}_to_cpup()

It turns out that le16_to_cpup() and le32_to_cpup() aren't always safe
to call with pointers into packed structures, since those are inlined
functions and GCC may lose the "packed" attribute.  So those references
can become unaligned kernel accesses, which are evil on some hardware.

This patch updates uses of those routines in the gadget stack.  The
references into packed structures can just use leXX_to_cpu(*x), which
in most cases is more natural.  Some other uses in RNDIS, mostly in
debug code, were wrong in the first place; those use get_unaligned().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agousblp: Don't let suspend to kill ->used
Pete Zaitcev [Fri, 25 May 2007 04:59:19 +0000 (21:59 -0700)]
usblp: Don't let suspend to kill ->used

Suspend destroys refcounting for open/release.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: set default y for CONFIG_USB_DEVICE_CLASS
Kay Sievers [Sun, 27 May 2007 15:04:58 +0000 (17:04 +0200)]
USB: set default y for CONFIG_USB_DEVICE_CLASS

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: bert hubert <bert.hubert@netherlabs.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years ago[CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine.
Paul Moore [Fri, 8 Jun 2007 01:38:14 +0000 (18:38 -0700)]
[CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine.

IPv4 options are not very well aligned within the packet and the
format of a CIPSO option is even worse.  The result is that the CIPSO
engine in the kernel does a few unaligned accesses when parsing and
validating incoming packets with CIPSO options attached which generate
error messages on certain alignment sensitive platforms.  This patch
fixes this by marking these unaligned accesses with the
get_unaliagned() macro.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NetLabel]: consolidate the struct socket/sock handling to just struct sock
Paul Moore [Fri, 8 Jun 2007 01:37:15 +0000 (18:37 -0700)]
[NetLabel]: consolidate the struct socket/sock handling to just struct sock

The current NetLabel code has some redundant APIs which allow both
"struct socket" and "struct sock" types to be used; this may have made
sense at some point but it is wasteful now.  Remove the functions that
operate on sockets and convert the callers.  Not only does this make
the code smaller and more consistent but it pushes the locking burden
up to the caller which can be more intelligent about the locks.  Also,
perform the same conversion (socket to sock) on the SELinux/NetLabel
glue code where it make sense.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4]: Do not remove idev when addresses are cleared
Herbert Xu [Fri, 8 Jun 2007 01:35:38 +0000 (18:35 -0700)]
[IPV4]: Do not remove idev when addresses are cleared

Now that we create idev before addresses are added, it no longer makes
sense to remove them when addresses are all deleted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agofirmware: remove orphaned Email
Markus Rechberger [Mon, 4 Jun 2007 16:45:44 +0000 (18:45 +0200)]
firmware: remove orphaned Email

Manuel Estrada Sainz passed away on May 9th 2004, his email account got
deactivated. He was in charge of the firmware_class code, and still got
CC'ed in recent discussions about it.

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokobject: use the proper printk level for kobject error
Greg Kroah-Hartman [Thu, 7 Jun 2007 22:05:15 +0000 (15:05 -0700)]
kobject: use the proper printk level for kobject error

Thanks to Jean Delvare <khali@linux-fr.org> for pointing it out to me.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDriver core: kill unused code
Stephen Hemminger [Tue, 8 May 2007 20:41:49 +0000 (13:41 -0700)]
Driver core: kill unused code

  CC      drivers/base/dd.o
drivers/base/dd.c:211: warning: =E2=80=98device_probe_drivers=E2=80=99 defi=
ned but not used

Looks like the following is dead.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoDriver core: keep PHYSDEV for old struct class_device
Kay Sievers [Tue, 1 May 2007 11:46:26 +0000 (13:46 +0200)]
Driver core: keep PHYSDEV for old struct class_device

Class-devices created by "struct class_device" are going to be replaced
by "struct device". Keep the deprecated PHYSDEV* variables for the already
"deprecated" struct class_device" devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoupdate Documentation/driver-model/platform.txt
David Brownell [Fri, 11 May 2007 05:36:14 +0000 (22:36 -0700)]
update Documentation/driver-model/platform.txt

Make note of the legacy "probe-the-hardware" drivers, and some APIs that
are mostly unused except by such drivers.  We probably can't escape having
legacy drivers for a while (e.g.  old ISA drivers), but we can at least
discourage this style code for new drivers, and unless it's unavoidable.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andres Salomon <dilinger@debian.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years ago[CIFS] CIFS should honour umask
Steve French [Fri, 8 Jun 2007 14:55:14 +0000 (14:55 +0000)]
[CIFS] CIFS should honour umask

This patch makes CIFS honour a process' umask like other filesystems.
Of course the server is still free to munge the permissions if it wants
to; but the client will send the "right" permissions to begin with.

A few caveats:

1) It only applies to filesystems that have CAP_UNIX (aka support unix
extensions)
2) It applies the correct mode to the follow up CIFSSMBUnixSetPerms()
after remote creation

When mode to CIFS/NTFS ACL mapping is complete we can do the
same thing for that case for servers which do not
support the Unix Extensions.

Signed-off-by: Matt Keenen <matt@opcode-solutions.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
17 years agoide: Add the MCP73/77 support to PATA driver
Peer Chen [Fri, 8 Jun 2007 13:14:32 +0000 (15:14 +0200)]
ide: Add the MCP73/77 support to PATA driver

Add the MCP73/MCP77 support to PATA driver.

bart: Added amd74xx_chipsets[] and amd_pci_tbl[] entries.
bart: Bumped driver version.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Cc: Alan Cox <alan@redhat.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoAdd the PATA controller device ID to pci_ids.h for MCP73/MCP77.
Peer Chen [Fri, 8 Jun 2007 13:14:32 +0000 (15:14 +0200)]
Add the PATA controller device ID to pci_ids.h for MCP73/MCP77.

Add the PATA controller device ID to pci_ids.h for MCP73/MCP77.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Cc: Alan Cox <alan@redhat.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agohpt366: disallow Ultra133 for HPT374
Sergei Shtylyov [Fri, 8 Jun 2007 13:14:32 +0000 (15:14 +0200)]
hpt366: disallow Ultra133 for HPT374

Eliminate UltraATA/133 support for HPT374 -- the chip isn't capable of this mode
according to the manual, and doesn't even seem to tolerate 66 MHz DPLL clock...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Geller Sandor <wildy@petra.hos.u-szeged.hu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoide: generic IDE PCI driver, add another device exception
Jiri Slaby [Fri, 8 Jun 2007 13:14:31 +0000 (15:14 +0200)]
ide: generic IDE PCI driver, add another device exception

generic IDE PCI driver, add another device exception

This device is char device and is grabbed by generic ide driver:
00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev ff) (prog-if ff)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Disallow generic IDE PCI driver to grab it by adding next condition. Also
consolidate exceptions to one bigger 'switch (dev->vendor)'.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Ingo Korb <ml@akana.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoide: HPA detect from resume
Lee Trager [Fri, 8 Jun 2007 13:14:30 +0000 (15:14 +0200)]
ide: HPA detect from resume

Currently when system which have HPA require HPA to be detected and
disabled upon resume from RAM or disk. The current IDE drivers do not do
this nor does libata (obviously it since it doesn't support HPA yet).

I have implemented this into the current IDE drivers and it has been
tested by many others since 7/15/2006 in bug number 6840:

http://bugzilla.kernel.org/show_bug.cgi?id=6840

and it has been confirmed to work fine with no problems.

bart: added drv != NULL check to generic_ide_suspend()

From: Lee Trager <lt73@cs.drexel.edu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoit821x: RAID mode fixes
Bartlomiej Zolnierkiewicz [Fri, 8 Jun 2007 13:14:29 +0000 (15:14 +0200)]
it821x: RAID mode fixes

The DMA support for RAID mode broke after:

commit 71ef51cc1756d1c56b57c70e7cc27a3559c81ee6
Author: Jens Axboe <axboe@suse.de>
Date: Â  Fri Jul 28 09:02:17 2006 +0200

  Â  [PATCH] it821x: fix ide dma setup bug

  Â  Only enable dma for a valid speed setting.

  Â  Signed-off-by: Jens Axboe <axboe@suse.de>

commit 0a8348d08677ad77ee353f96eb8745c693a05a13
Author: Jens Axboe <axboe@suse.de>
Date: Â  Fri Jul 28 08:58:26 2006 +0200

  Â  [PATCH] ide: if the id fields looks screwy, disable DMA

  Â  It's the safer choice. Originally due to a bug in itx821x, but a
  Â  generally sound thing to do.

  Â  Signed-off-by: Jens Axboe <axboe@suse.de>

However it worked by pure luck before Jens' fixes: bogus ide_dma_enable()
usage in it821x driver combined with loosy check in ide_dma_verbose() allowed
the hardware to operate in DMA mode.  When these problems were fixed the DMA
support broke...

The source root for the regression turned out to be that the it821x.c code
was clearing too much of id->field_valid.  The IDE core code was using the
original value of id->field_valid to do the tuning but later DMA got disabled
in ide_dma_verbose() because of the incorrect id->field_valid fixup.  Fix it.

While at it:

* Do fixup() after probing the drives but before tuning them (which is also
  OK w.r.t. ide_undecoded_slave() fixup).  This change fixes device IDENTIFY
  data to be consistent before/after the tuning and allows us to remove extra
  re-tuning of drives from it821x_fixups().

* Fake MWDMA0 enabled/supported bits in IDENTIFY data if the device has
  DMA capable bit set (this is just to tell the IDE core that DMA is
  supported since it821x firmware takes care of DMA mode programming).

* Don't touch timing registers and don't program transfer modes on devices
  et all when in RAID mode - depend solely on firmware to do the tuning
  (as suggested by Alan Cox and done in libata pata_it821x driver).

Thanks for testing the patch goes out to Thomas Kuther.

Cc: Thomas Kuther <gimpel@sonnenkinder.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoserverworks: fix CSB6 tuning logic
Bartlomiej Zolnierkiewicz [Fri, 8 Jun 2007 13:14:28 +0000 (15:14 +0200)]
serverworks: fix CSB6 tuning logic

Problem noticed by Joe Zbiciak, see

http://kerneltrap.org/node/8252

for details.

On CSB6 the driver is using BIOS settings and not programming DMA/PIO timings
itself.  However the logic was completely broken and resulted in wrong timings
being silently allowed (instead of being corrected by the driver).

This bug would explain some data corruption/timeout issues with Serverworks
MegaIDE in RAID mode that Alan Cox has fixed recently with:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2074a106f52b6371885afbd714e929d60d0e3f64

For 2.6.23 we may be better off with completely switching the driver to always
programming timings (libata pata_serverworks.c driver is doing things this way
and there were no problems reported so far) but for 2.6.22 lets fix the bug
in the simplest and the least intrusive way.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoserverworks: remove crappy code
Bartlomiej Zolnierkiewicz [Fri, 8 Jun 2007 13:14:27 +0000 (15:14 +0200)]
serverworks: remove crappy code

Remove crappy code noticed by Linus, see

http://lkml.org/lkml/2007/5/23/476

for details.

While at it simplify logic a bit.

There should be no functionality changes caused by this patch.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
17 years agoV4L/DVB (5751): Ivtv: fix ia64 printk format warnings.
Hans Verkuil [Thu, 7 Jun 2007 12:04:03 +0000 (09:04 -0300)]
V4L/DVB (5751): Ivtv: fix ia64 printk format warnings.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures
Mauro Carvalho Chehab [Thu, 7 Jun 2007 12:42:20 +0000 (09:42 -0300)]
V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures

This patch moves flexcop-dma (currently used only by flexcop-pci) to
b2c2-flexcop-pci module, that is dependent on CONFIG_PCI, fixing the bug
as reported by Geert Uytterhoeven <geert@linux-m68k.org>:

drivers/media/dvb/b2c2/flexcop-dma.c uses the PCI DMA API, but
DVB_B2C2_FLEXCOP doesn't depend on PCI, causing the following problem on
PCI-less systems:

| linux/drivers/media/dvb/b2c2/flexcop-dma.c:20: warning: implicit declaration of function 'pci_alloc_consistent'
| linux/drivers/media/dvb/b2c2/flexcop-dma.c:20: warning: implicit declaration of function 'pci_alloc_consistent'

Apparently this is the flexcop DMA core, which is used by both
DVB_B2C2_FLEXCOP_PCI and DVB_B2C2_FLEXCOP_USB.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode.
Hans Verkuil [Thu, 17 May 2007 11:08:45 +0000 (08:08 -0300)]
V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA
Hans Verkuil [Mon, 4 Jun 2007 07:55:36 +0000 (04:55 -0300)]
V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA

Michael Schimek requested the addition of inverted alpha framebuffer
caps/flags to support such hardware.
'Normal' alpha uses this formula to mix the framebuffer and video:
output = fb pixel * fb alpha + video pixel * (1 - fb alpha)
and the 'inverted' alpha uses this formula:
output = fb pixel * (1 - fb alpha) + video pixel * fb alpha

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>