GitHub/moto-9609/android_kernel_motorola_exynos9610.git
8 years agoALSA: hda - Fix mutex deadlock at HDMI/DP hotplug
Takashi Iwai [Thu, 17 Mar 2016 13:48:13 +0000 (14:48 +0100)]
ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug

The recent change in HD-audio HDMI/DP codec driver for allowing the
dynamic PCM binding introduced a new spec->pcm_mutex.  One of the
protected area by this mutex is hdmi_present_sense().  As reported by
Intel CI tests, unfortunately, the new mutex causes a deadlock when
the hotplug/unplug is triggered during the codec is in runtime
suspend.  The buggy code path is like the following:

  hdmi_unsol_event() -> ...
    -> hdmi_present_sense()
==>     ** here taking pcm_mutex
      -> hdmi_present_sense_via_verbs()
        -> snd_hda_power_up_pm() -> ... (runtime resume calls)
          -> generic_hdmi_resume()
            -> hdmi_present_sense()
==>           ** here taking pcm_mutex again!

As we can see here, the problem is that the mutex is taken before
snd_hda_power_up_pm() call that triggers the runtime resume.  That is,
the obvious solution is to move the power up/down call outside the
mutex; it is exactly what this patch provides.

The patch also clarifies why this bug wasn't caught beforehand.  We
used to have the i915 audio component for hotplug for all Intel chips,
and in that code path, there is no power up required but the
information is taken directly from the graphics side.  However, we
recently switched back to the old method for some old Intel chips due
to regressions, and now the deadlock issue is surfaced.

Fixes: a76056f2e57e ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: ctl: change return value in compatibility layer so that it's the same value...
Takashi Sakamoto [Thu, 17 Mar 2016 12:14:36 +0000 (21:14 +0900)]
ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation

In control compatibility layer, when no elements are found by
ELEM_READ/ELEM_WRITE ioctl commands, ENXIO is returned. On the other hand,
in core implementation, ENOENT is returned. This is not good for
ALSA ctl applications.

This commit changes the return value from the compatibility layer so
that the same value is returned.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: mixart: silence an uninitialized variable warning
Dan Carpenter [Wed, 16 Mar 2016 07:42:13 +0000 (10:42 +0300)]
ALSA: mixart: silence an uninitialized variable warning

We could print the uninitialized value of "stat" in the error message.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: usb-audio: Add sanity checks for endpoint accesses
Takashi Iwai [Tue, 15 Mar 2016 14:20:58 +0000 (15:20 +0100)]
ALSA: usb-audio: Add sanity checks for endpoint accesses

Add some sanity check codes before actually accessing the endpoint via
get_endpoint() in order to avoid the invalid access through a
malformed USB descriptor.  Mostly just checking bNumEndpoints, but in
one place (snd_microii_spdif_default_get()), the validity of iface and
altsetting index is checked as well.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
Takashi Iwai [Tue, 15 Mar 2016 11:14:49 +0000 (12:14 +0100)]
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()

Just a minor code cleanup: unify the error paths.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
Takashi Iwai [Tue, 15 Mar 2016 11:09:10 +0000 (12:09 +0100)]
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()

create_fixed_stream_quirk() may cause a NULL-pointer dereference by
accessing the non-existing endpoint when a USB device with a malformed
USB descriptor is used.

This patch avoids it simply by adding a sanity check of bNumEndpoints
before the accesses.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Limit i915 HDMI binding only for HSW and later
Takashi Iwai [Tue, 15 Mar 2016 17:15:26 +0000 (18:15 +0100)]
ALSA: hda - Limit i915 HDMI binding only for HSW and later

It turned out that the pre-HSW Intel chips are incompatible with the
naive assumption we had -- the fixed mapping between the port and the
HD-audio widget.  This may result in the bad access, as captured by
the recent patch to add a WARN_ON() for the port mapping check.

As a quick workaround, disable the i915 audio component binding for
all pre-Haswell models.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Fix unconditional GPIO toggle via automute
Takashi Iwai [Tue, 15 Mar 2016 15:44:55 +0000 (16:44 +0100)]
ALSA: hda - Fix unconditional GPIO toggle via automute

Cirrus HD-audio driver may adjust GPIO pins for EAPD dynamically
depending on the jack plug state.  This works fine for the auto-mute
mode where the speaker gets muted upon the HP jack plug.   OTOH, when
the auto-mute mode is off, this turns off the EAPD unexpectedly
depending on the jack state, which results in the silent speaker
output.

This patch fixes the silent speaker output issue by setting GPIO bits
constantly when the auto-mute mode is off.

Reported-and-tested-by: moosotc@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: mixart: silence unitialized variable warnings
Dan Carpenter [Tue, 15 Mar 2016 07:09:17 +0000 (10:09 +0300)]
ALSA: mixart: silence unitialized variable warnings

We print can print the uninitialized memory on error.  Which is an info
leak, I suppose but it's basically harmless.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoMerge tag 'asoc-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Mon, 14 Mar 2016 13:03:29 +0000 (14:03 +0100)]
Merge tag 'asoc-v4.6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.6

The main thing in terms of the core this time around has been some
additional framework work for dynamic topologies (though we *still*
don't appear to have a stable ABI for the topology code, it's probably
worth considering if this will ever happen...).  Otherwise the work has
almost all been in the drivers:

 - HDMI support for Sky Lake, along with other fixes and enhancements
   for the Intel drivers.
 - Lots of improvements to the Renesas drivers.
 - Capture support for Qualcomm drivers.
 - Support for TI DaVinci DRA7xxx devices.
 - New machine drivers for Freescale systems with Cirrus CODECs,
   Mediatek systems with RT5650 CODECs.
 - New CPU drivers for Allwinner S/PDIF controllers
 - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514.

8 years agoALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type
Subhransu S. Prusty [Mon, 14 Mar 2016 05:05:06 +0000 (10:35 +0530)]
ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type

nvhdmi_chmap_cea_alloc_validate_get_type calls itself recursively
using chmap ops causing the double fault.

Fixed by adding the default validate_get_type handling inside nvdia
validate_get_type handler.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=114311
Fixes: 67b90cb ("ALSA: hda - Create common chmap object")
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Tested-by: Andreas Reis <andreas.reis@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
Vittorio Gambaletta (VittGam) [Sun, 13 Mar 2016 21:19:34 +0000 (22:19 +0100)]
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.

The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41
will often fail, so add a quirk entry to fix it.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda
Aaron Plattner [Sun, 13 Mar 2016 20:58:57 +0000 (13:58 -0700)]
ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda

Vendor ID 0x10de0082 is used by a yet-to-be-named GPU chip.

This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoMerge branch 'for-linus' into for-next
Takashi Iwai [Mon, 14 Mar 2016 07:23:07 +0000 (08:23 +0100)]
Merge branch 'for-linus' into for-next

8 years agoMerge remote-tracking branches 'asoc/topic/sunxi', 'asoc/topic/topology' and 'asoc...
Mark Brown [Sun, 13 Mar 2016 08:17:56 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/sunxi', 'asoc/topic/topology' and 'asoc/topic/wm8974' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/rt5640', 'asoc/topic/rt5659', 'asoc/topic...
Mark Brown [Sun, 13 Mar 2016 08:17:47 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/rt5640', 'asoc/topic/rt5659', 'asoc/topic/samsung' and 'asoc/topic/ssm4567' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rockchip', 'asoc/topic...
Mark Brown [Sun, 13 Mar 2016 08:17:35 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rockchip', 'asoc/topic/rt298', 'asoc/topic/rt5514' and 'asoc/topic/rt5616' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/pxa' and 'asoc/topic/qcom' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:17:28 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/pxa' and 'asoc/topic/qcom' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/max98926', 'asoc/topic/mtk', 'asoc/topic...
Mark Brown [Sun, 13 Mar 2016 08:17:18 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/max98926', 'asoc/topic/mtk', 'asoc/topic/mxs-saif', 'asoc/topic/nau8825' and 'asoc/topic/omap' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/fsl-sai', 'asoc/topic/fsl-ssl', 'asoc...
Mark Brown [Sun, 13 Mar 2016 08:17:09 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/fsl-sai', 'asoc/topic/fsl-ssl', 'asoc/topic/hdac' and 'asoc/topic/max9867' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/fsl-card' and 'asoc...
Mark Brown [Sun, 13 Mar 2016 08:17:01 +0000 (15:17 +0700)]
Merge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/fsl-card' and 'asoc/topic/fsl-mpc5200' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/bcm2835' and 'asoc...
Mark Brown [Sun, 13 Mar 2016 08:16:53 +0000 (15:16 +0700)]
Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/bcm2835' and 'asoc/topic/cs42xx8' into asoc-next

8 years agoMerge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/adau17x1', 'asoc...
Mark Brown [Sun, 13 Mar 2016 08:16:41 +0000 (15:16 +0700)]
Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/adau17x1', 'asoc/topic/ads117x', 'asoc/topic/adsp' and 'asoc/topic/arizona' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/rt5645' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:38 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/pcm3168a' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:36 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/pcm3168a' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/pcm179x' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:33 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/pcm179x' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/pcm' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:30 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/pcm' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/intel' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:26 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/intel' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/dapm' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:24 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/core-pcm' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:21 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/core-pcm' into asoc-next

8 years agoMerge remote-tracking branch 'asoc/topic/core' into asoc-next
Mark Brown [Sun, 13 Mar 2016 08:16:19 +0000 (15:16 +0700)]
Merge remote-tracking branch 'asoc/topic/core' into asoc-next

8 years agoMerge tag 'asoc-fix-v4.5-rc6' into asoc-linus
Mark Brown [Sun, 13 Mar 2016 08:16:11 +0000 (15:16 +0700)]
Merge tag 'asoc-fix-v4.5-rc6' into asoc-linus

ASoC: Fixes for v4.5

This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places.  They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.

The other changes are:
 - A fix for Qualcomm devices to work on big endian systems.  The
   original change is actually correct but triggered a bug in regmap
   which is too invasive to fix for this cycle and can be worked around
   by just letting regmap pick the default.
 - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
   spinlocks when it needed to.
 - A fix for the new Intel Sky Lake driver forgetting that C pointer
   arithmetic takes the type of the pointer into consideration.
 - A revert of a change to the FSL SSI driver that broke some systems.
 - A fix for the cleanup path of the wm9713 driver.
 - A fix for some incorrect register definitions in the ADAU17x1 driver
   that caused misclocking in some configurations.
 - A fix for the tracepoints for jack detection to avoid using an
   internal field of the core jack structure which is no longer present
   in all configurations.
 - A fix for another of the new Intel drivers which tried to write to a
   string literal.

# gpg: Signature made Mon 07 Mar 2016 09:41:48 ICT using RSA key ID 5D5487D0
# gpg: key CD7BEEBC: no public key for trusted key - skipped
# gpg: key CD7BEEBC marked as ultimately trusted
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: key 5C6153AD: no public key for trusted key - skipped
# gpg: key 5C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

8 years agoASoC: rsnd: add simplified module explanation
Kuninori Morimoto [Thu, 10 Mar 2016 05:29:21 +0000 (05:29 +0000)]
ASoC: rsnd: add simplified module explanation

Renesas sound driver user needs to read its datasheet when create DT.
But it is difficult to understand, because it has many modules
(SRC/CTU/MIX/DVC/SSIU/SSI/AudioDMAC/AudioDMACperiperi),
and many features (Asynchronous/Synchronous mode on SRC, CTU matrix,
DVC volume settings feature, Multi-SSI/TDM-SSI, etc).
This patch adds simplified explanation to help setting/understanding.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: hdac_hdmi: Add broxton device ID
Jeeja KP [Fri, 11 Mar 2016 04:42:55 +0000 (10:12 +0530)]
ASoC: hdac_hdmi: Add broxton device ID

Broxton HDMI codec is similar to Skylake so add the device ID

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: Bxtn: Add Broxton PCI ID
Senthilnathan Veppur [Fri, 11 Mar 2016 04:42:54 +0000 (10:12 +0530)]
ASoC: Intel: Bxtn: Add Broxton PCI ID

Broxton is an Intel SoC which sports a DSP and system is quite
like Skylake. So add this ID in Skylake driver

Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: Skylake: Move Skylake dsp ops & loader ops
Jeeja KP [Fri, 11 Mar 2016 04:42:53 +0000 (10:12 +0530)]
ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops

The code loading for Skylake and other platforms is different, so
add a dsp_ops and a loader_ops which can be defined for each
platform.

Move the dsp init, cleanup and loader ops (alloc and free dma) to
these ops

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: add dmabuffer to common sst_dsp
Jeeja KP [Fri, 11 Mar 2016 04:42:52 +0000 (10:12 +0530)]
ASoC: Intel: add dmabuffer to common sst_dsp

Broxton uses HDA DMA so needs to keep dmab in the driver context
so add it

Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: Skylake: Unstatify skl_dsp_enable_core
Jayachandran B [Fri, 11 Mar 2016 04:42:51 +0000 (10:12 +0530)]
ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core

The function skl_dsp_enable_core will be called by other parts of
driver so this can no longer be a static function.

Signed-off-by: Jayachandran B <jayachandran.b@intel.com>
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: Skylake: Fix whitepsace issues
Vinod Koul [Fri, 11 Mar 2016 04:42:50 +0000 (10:12 +0530)]
ASoC: Intel: Skylake: Fix whitepsace issues

Some double whitespaces issues existed in driver, so fix them up.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: Intel: Skylake: Move module id defines
Vinod Koul [Fri, 11 Mar 2016 04:42:49 +0000 (10:12 +0530)]
ASoC: Intel: Skylake: Move module id defines

The module ID defines are common to other platforms so can be
reused if moved to a common driver header so move it

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: omap-hdmi-audio: Support for DRA7xx family
Peter Ujfalusi [Fri, 11 Mar 2016 14:04:54 +0000 (16:04 +0200)]
ASoC: omap-hdmi-audio: Support for DRA7xx family

DRA7xx family is compatible with the OMAP5 HDMI.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: nau8825: fix issue that pop noise when start playback
John Hsu [Sat, 12 Mar 2016 01:33:58 +0000 (17:33 -0800)]
ASoC: nau8825: fix issue that pop noise when start playback

Reduce pop noise in power up and down sequence when playback.
The DAPM widgets graph is reconstructed to ensure the
register write sequence at playback matches exactly to the
v5 clickless sequence provided by Nuvoton.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: qcom: fix build error
Sudip Mukherjee [Fri, 11 Mar 2016 18:12:52 +0000 (23:42 +0530)]
ASoC: qcom: fix build error

While building m32r allmodconfig the build failed with:
ERROR: "bad_dma_ops" [sound/soc/qcom/snd-soc-lpass-platform.ko] undefined!
ERROR: "dma_common_mmap" [sound/soc/qcom/snd-soc-lpass-platform.ko] undefined!

To satisfy the dependency CONFIG_SND_SOC_LPASS_PLATFORM should depend
on HAS_DMA.
Some other configs also needs the dependency on HAS_DMA as they are
directly or indirectly selecting SND_SOC_LPASS_PLATFORM.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: davinci: Kconfig: Update the edma-pcm section's dependency and help
Peter Ujfalusi [Fri, 11 Mar 2016 14:04:20 +0000 (16:04 +0200)]
ASoC: davinci: Kconfig: Update the edma-pcm section's dependency and help

Instead of depending on individual SoCs make the edma-pcm depend on the eDMA
dmaengine driver (TI_EDMA).
Update the help text and add DRA7xx family since they have eDMA integrated
as well along with sDMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: davinci-mcasp: dai format runtime reconfiguration
Peter Ujfalusi [Fri, 11 Mar 2016 11:18:51 +0000 (13:18 +0200)]
ASoC: davinci-mcasp: dai format runtime reconfiguration

In case when the dai format is set via the dai_link the format
configuration happens once when the links are probed. If the McASP lose
context after this, the information will be lost and McASP will not going
to work correctly.
To overcome this issue, we save the fmt and set it within hw_params as
well.

Reported-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoALSA: hda - fix the mic mute button and led problem for a Lenovo AIO
Hui Wang [Fri, 11 Mar 2016 04:04:02 +0000 (12:04 +0800)]
ALSA: hda - fix the mic mute button and led problem for a Lenovo AIO

This Lenovo ThinkCentre AIO also uses Line2 as mic mute button and
uses GPIO2 to control the mic mute led, so applying this quirk can
make both the button and led work.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1555912
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoASoC: wm_adsp: Use correct local length in error message
Charles Keepax [Thu, 10 Mar 2016 10:46:07 +0000 (10:46 +0000)]
ASoC: wm_adsp: Use correct local length in error message

Fixes: 44029e9e1290 ("ASoC: wm_adsp: wm_coeff_{read|write}_control should use passed length")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoALSA: pcm: Avoid "BUG:" string for warnings again
Takashi Iwai [Thu, 10 Mar 2016 19:56:20 +0000 (20:56 +0100)]
ALSA: pcm: Avoid "BUG:" string for warnings again

The commit [d507941beb1e: ALSA: pcm: Correct PCM BUG error message]
made the warning prefix back to "BUG:" due to its previous wrong
prefix.  But a kernel message containing "BUG:" seems taken as an Oops
message wrongly by some brain-dead daemons, and it annoys users in the
end.  Instead of teaching daemons, change the string again to a more
reasonable one.

Fixes: 507941beb1e ('ALSA: pcm: Correct PCM BUG error message')
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Add a sanity check of pin / port mapping on i915 HDMI/DP
Takashi Iwai [Thu, 10 Mar 2016 14:49:35 +0000 (15:49 +0100)]
ALSA: hda - Add a sanity check of pin / port mapping on i915 HDMI/DP

There is an implicit rule to map between pin NID and port number on
Intel HDMI/DP codec: the mapping is fixed only for NID 0x05, 0x06 and
0x07.  For avoiding the possible memory corruption, add a sanity check
for the NID value and splat WARN_ON() for invalid accesses.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: dice: use structure to represent register parameters instead of array with...
Takashi Sakamoto [Thu, 10 Mar 2016 12:44:28 +0000 (21:44 +0900)]
ALSA: dice: use structure to represent register parameters instead of array with basic type element

In dice interface, two blocks of register are accessible via IEEE 1394
asynchronous transaction to represent the number of supported isochronous
streams and the number of quadlets for stream information.

Current ALSA dice driver uses array with 'unsigned int' element for
temporary cache of these information. But using structure is preferable
for begin easily comprehensible.

This commit applies a local structure for this aim.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Don't handle ELD notify from invalid port
Takashi Iwai [Thu, 10 Mar 2016 11:02:49 +0000 (12:02 +0100)]
ALSA: hda - Don't handle ELD notify from invalid port

The current Intel HDMI codec driver supports only three fixed ports
from port B to port D.  However, i915 driver may assign a DP on other
ports, e.g. port A, when no eDP is used.  This incompatibility is
caught later at pin_nid_to_pin_index() and results in a warning
message like "HDMI: pin nid 4 not registered" at each time.

This patch filters out such invalid events beforehand, so that the
kernel won't be too grumbling.

Reported-by: Stefan Assmann <sassmann@kpanic.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Apply reboot D3 fix for CX20724 codec, too
Takashi Iwai [Thu, 10 Mar 2016 10:33:43 +0000 (11:33 +0100)]
ALSA: hda - Apply reboot D3 fix for CX20724 codec, too

Just like CX20722, CX7024 codec also requires the power down at reboot
in order to reduce the noise at reboot/shutdown.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=113511
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoASoC: hdac_hdmi: Fix infoframe programming
Subhransu S. Prusty [Thu, 10 Mar 2016 03:34:07 +0000 (09:04 +0530)]
ASoC: hdac_hdmi: Fix infoframe programming

Audio infoframe used incorrect buffer, so fix it.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoALSA: dice: force to add two pcm devices for listed models
Takashi Sakamoto [Mon, 7 Mar 2016 13:35:45 +0000 (22:35 +0900)]
ALSA: dice: force to add two pcm devices for listed models

Some models reduce the number of available isochronous streams for higher
sampling transfer frequency. Such models bring an issue about how to add
PCM substreams. When at lower sampling transfer frequency, the
models reports whole available streams, thus this driver can add enough
number of PCM substreams at probing time. On the other hand, at higher
sampling transfer frequency, this driver can just add reduced number of
PCM substreams. After probed, even if the sampling transfer frequency is
changed to lower rate, fewer PCM substreams are actually available. This
is inconvenience.

For the reason, this commit adds a list so that this driver assume models
on the list to have two pairs of PCM substreams. This list keeps the name
of model in which the number of available streams differs depending on
sampling transfer frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: dice: handle several PCM substreams when any isochronous streams are available
Takashi Sakamoto [Mon, 7 Mar 2016 13:35:44 +0000 (22:35 +0900)]
ALSA: dice: handle several PCM substreams when any isochronous streams are available

In former commits, ALSA dice driver can handle available isochronous
streams. This commit adds support for several PCM substreams on the
streams.

The additional PCM substreams are available via another ALSA PCM character
devices so that one ALSA PCM application can handle them without cumbersome
operations. For example, two PCM substreams are available on each stream,
two ALSA character devices are added for them. In configuration space of
alsa-lib, it's represented with 'hw:0,0' and 'hw:0,1'.

The PCM substreams are constraint to parameters of the corresponding
streams. If the PCM substreams are unavailable for some reasons,
open(2) to ALSA PCM character device returns error and reports ENXIO.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: dice: handle whole available isochronous streams
Takashi Sakamoto [Mon, 7 Mar 2016 13:35:43 +0000 (22:35 +0900)]
ALSA: dice: handle whole available isochronous streams

This commit enables ALSA dice driver to handle whole available streams.

In Dice, certain registers represent the number of available streams at
current sampling transfer frequency for both directions. The parameters
of each stream are represented in a block of register. This block is
aligned sequentially. These streams start simultaneously by writing
enable bit to a register.

This commit operates these registers when starting/stopping streams.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: dice: have two sets of isochronous resources/streams
Takashi Sakamoto [Mon, 7 Mar 2016 13:35:42 +0000 (22:35 +0900)]
ALSA: dice: have two sets of isochronous resources/streams

Currently ALSA dice driver handles a pair of isochronous resources for
IEC 61883-1/6 packet streaming. While, according to some documents about
ASICs named as 'Dice', several isochronous streams are available.

Here, I start to describe ASICs produced under 'Dice' name.
 * Dice II (designed by wavefront semiconductor, including TCAT's IP)
   * STD (with limited functionality of DTCP)
   * CP  (with full functionality of DTCP)
 * TCD2210/2210-E (so-called 'Dice Mini')
 * TCD2220/2220-E (so-called 'Dice Jr.')
 * TCD3070-CH (so-called 'Dice III')

Some documents are public and we can see hardware design of them. We can
find some articles about hardware internal register definitions
(not registers exported to IEEE 1394 bus).

* DICE II User Guide
  * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 6.1: AVS Audio Receiver Memory Map
        * ARX1-ARX4
    * 6.2 AVS Audio Transmitters
      * Table 6.2: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* TCD22xx User Guide
  * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 66: AVS Audio Receiver Memory Map
        * ARX1, ARX2
    * 6/2 AVS Audio Transmitters
      * Table 67: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* DICE III
  * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf
    * Dual stream 63 channel transmitter/receiver

For Dice II and TCD22xx series, maximum 16 data channels are transferred in
an AMDTP packet, while for Dice III, maximum 32 data channels are
transferred.

According to the design of the series of these ASICs, this commit allows
this driver to handle additional set of isochronous resources. For
practical reason, two pair of isochronous resources are added. As of this
commit, this driver still use a pair of the first isochronous resources.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: seq: Provide card number / PID via sequencer client info
Martin Koegler [Wed, 2 Mar 2016 18:26:28 +0000 (19:26 +0100)]
ALSA: seq: Provide card number / PID via sequencer client info

rawmidi devices expose the card number via IOCTLs, which allows to
find the corresponding device in sysfs.

The sequencer provides no identifing data. Chromium works around this
issue by scanning rawmidi as well as sequencer devices and matching
them by using assumtions, how the kernel register sequencer devices.

This changes adds support for exposing the card number for kernel clients
as well as the PID for user client.

The minor of the API version is changed to distinguish between the zero
initialised reserved field and card number 0.

[minor coding style fixes by tiwai]

Signed-off-by: Martin Koegler <martin.koegler@chello.at>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoMerge branch 'topic/hda' into for-next
Takashi Iwai [Tue, 8 Mar 2016 09:49:43 +0000 (10:49 +0100)]
Merge branch 'topic/hda' into for-next

8 years agoALSA: hda - Fix unexpected resume through regmap code path
Takashi Iwai [Fri, 4 Mar 2016 10:34:18 +0000 (11:34 +0100)]
ALSA: hda - Fix unexpected resume through regmap code path

HD-audio driver has a mechanism to trigger the runtime resume
automatically at accessing the verbs.  This auto-resume, however,
causes the mutex deadlock when invoked from the regmap handler since
the regmap keeps the mutex while auto-resuming.  For avoiding that,
there is some tricky check in the HDA regmap handler to return -EAGAIN
error to back-off when the codec is powered down.  Then the caller of
regmap r/w will retry after properly turning on the codec power.

This works in most cases, but there seems a slight race between the
codec power check and the actual on-demand auto-resume trigger.  This
resulted in the lockdep splat, eventually leading to a real deadlock.

This patch tries to address the race window by getting the runtime PM
refcount at the check time using pm_runtime_get_if_in_use().  With
this call, we can keep the power on only when the codec has been
already turned on, and back off if not.

For keeping the code consistency, the code touching the runtime PM is
stored in hdac_device.c although it's used only locally in
hdac_regmap.c.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoASoC: rt5640: remove unused variable
Sudip Mukherjee [Tue, 8 Mar 2016 08:05:31 +0000 (13:35 +0530)]
ASoC: rt5640: remove unused variable

We are getting build warning about:
sound/soc/codecs/rt5640.c:1892:11: warning: unused variable 'dai_sel'

The use of the variable was removed but the variable itself was not
removed.

Fixes: c467fc0e010b ("ASoC: rt5640: Set PLL src according to source")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoALSA: hda - Use snd_hdac namespace prefix for chmap exported APIs
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:52 +0000 (19:59 +0530)]
ALSA: hda - Use snd_hdac namespace prefix for chmap exported APIs

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Move chmap support helpers/ops to core
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:51 +0000 (19:59 +0530)]
ALSA: hda - Move chmap support helpers/ops to core

Chmap helpers, ops, controls are moved to core.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - chmap helper args modified to use generic hdac objs.
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:50 +0000 (19:59 +0530)]
ALSA: hda - chmap helper args modified to use generic hdac objs.

Chmap helper arguments are modified to use either hdac_device
object or hdac_chmap object instead of codec specific object.
With this moving these APIs to core will be easier.

Helper added to access a specific channel_allocation object
instead of directly accessing.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Add hdmi chmap verb programming ops to chmap object
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:49 +0000 (19:59 +0530)]
ALSA: hda - Add hdmi chmap verb programming ops to chmap object

Add slot and channel count programming to hdmi_chmap object and
move the chmap_ops to core. Use register_chmap_ops API to
register for default ops.  Override specific chmap ops in the
driver.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Use hdac name space for CEA spk alloc structure
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:48 +0000 (19:59 +0530)]
ALSA: hda - Use hdac name space for CEA spk alloc structure

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Register chmap obj as priv data instead of codec
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:47 +0000 (19:59 +0530)]
ALSA: hda - Register chmap obj as priv data instead of codec

With this chmap object is added as private data and new ops are
added to access driver specific chmap.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoALSA: hda - Create common chmap object
Subhransu S. Prusty [Fri, 4 Mar 2016 14:29:46 +0000 (19:59 +0530)]
ALSA: hda - Create common chmap object

chmap object represents multichannel capability and contains chmap
ops. Legacy driver is updated to use this.

With next set of patches chmap object is moved to common to be
reused by other drivers (ex: skylake ASoC hdmi driver).

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
8 years agoMerge tag 'asoc-fix-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brooni...
Takashi Iwai [Mon, 7 Mar 2016 10:06:46 +0000 (11:06 +0100)]
Merge tag 'asoc-fix-v4.5-rc6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.5

This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places.  They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.

The other changes are:
 - A fix for Qualcomm devices to work on big endian systems.  The
   original change is actually correct but triggered a bug in regmap
   which is too invasive to fix for this cycle and can be worked around
   by just letting regmap pick the default.
 - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
   spinlocks when it needed to.
 - A fix for the new Intel Sky Lake driver forgetting that C pointer
   arithmetic takes the type of the pointer into consideration.
 - A revert of a change to the FSL SSI driver that broke some systems.
 - A fix for the cleanup path of the wm9713 driver.
 - A fix for some incorrect register definitions in the ADAU17x1 driver
   that caused misclocking in some configurations.
 - A fix for the tracepoints for jack detection to avoid using an
   internal field of the core jack structure which is no longer present
   in all configurations.
 - A fix for another of the new Intel drivers which tried to write to a
   string literal.

8 years agoASoC: rsnd: CMD TIMSEL support for Capture
Kuninori Morimoto [Mon, 7 Mar 2016 05:09:34 +0000 (05:09 +0000)]
ASoC: rsnd: CMD TIMSEL support for Capture

CMD.out should use same as SRC.out for TIMSEL settings,
but it cares Playback case only. This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: SRC TIMSEL support for Capture
Kuninori Morimoto [Mon, 7 Mar 2016 05:09:14 +0000 (05:09 +0000)]
ASoC: rsnd: SRC TIMSEL support for Capture

SRC has Sync/Async mode, and it can't use Sync mode when Capture
with CMD. In Async mode, it needs to care about in/out SRC rate
for settings, but current driver supporting Playback case only.
This patch supports Capture case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: add rsnd_src_get_in/out_rate()
Kuninori Morimoto [Mon, 7 Mar 2016 05:08:33 +0000 (05:08 +0000)]
ASoC: rsnd: add rsnd_src_get_in/out_rate()

SRC will convert rate, and then, CMD and SSI want to know its
rate (= SRC.in / SRC.out) for each purpose.
Current driver is supporting only Playback, but SRC+Capture support
needs more flexibility.
This patch adds rsnd_src_get_in/out_rate() for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: rename rsnd_enable_sync_convert() to rsnd_src_sync_is_enabled()
Kuninori Morimoto [Mon, 7 Mar 2016 05:07:57 +0000 (05:07 +0000)]
ASoC: rsnd: rename rsnd_enable_sync_convert() to rsnd_src_sync_is_enabled()

rsnd_enable_sync_convert() is for checking, not for setting.
In order to avoid confusion, this patch renamed it to
rsnd_src_sync_is_enabled()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: SRC function parameter uses "mod" instead of "src"
Kuninori Morimoto [Mon, 7 Mar 2016 05:07:29 +0000 (05:07 +0000)]
ASoC: rsnd: SRC function parameter uses "mod" instead of "src"

To reduce confusion, SRC uses "mod" instead of "src"
as function parameter

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: SRC sync mode is not related to clock master mode
Kuninori Morimoto [Mon, 7 Mar 2016 05:06:46 +0000 (05:06 +0000)]
ASoC: rsnd: SRC sync mode is not related to clock master mode

SRC sync mode needs to control its clock (= for in/out). 1st but codec
side clock

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsnd: don't enable SRC Sync mode when Capture with CMD
Kuninori Morimoto [Mon, 7 Mar 2016 05:06:17 +0000 (05:06 +0000)]
ASoC: rsnd: don't enable SRC Sync mode when Capture with CMD

It can't use SRC Synchronous convert when Capture if it uses CMD,
because no one provide out side clocks.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rt5640: add supplys for dac power
Bard Liao [Mon, 7 Mar 2016 07:09:38 +0000 (15:09 +0800)]
ASoC: rt5640: add supplys for dac power

The DAC1/2 power is for both DACs and related mixer/mux. Add SUPPLY
type widgets to support it.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rt5640: Set PLL src according to source
Bard Liao [Mon, 7 Mar 2016 07:09:37 +0000 (15:09 +0800)]
ASoC: rt5640: Set PLL src according to source

rt5640_set_dai_pll set pll source according to given source and
dai id. However, the pll source should be set according to given
source only.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rsrc-card: tidyup convert-channels explain
Kuninori Morimoto [Mon, 7 Mar 2016 04:57:55 +0000 (04:57 +0000)]
ASoC: rsrc-card: tidyup convert-channels explain

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoASoC: rt5616: add missing mute control for HPVOL
John Lin [Mon, 7 Mar 2016 04:12:11 +0000 (12:12 +0800)]
ASoC: rt5616: add missing mute control for HPVOL

Add missing kcontrol for HPVOL mute control.

Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoLinux 4.5-rc7
Linus Torvalds [Sun, 6 Mar 2016 22:48:03 +0000 (14:48 -0800)]
Linux 4.5-rc7

8 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 6 Mar 2016 22:14:54 +0000 (14:14 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fix from Olof Johansson:
 "Tiny fixes branch this week, in fact only one patch.

  Turns out the USB support for a Renesas board was developed on a
  pre-release board that ended up being changed before shipping.  To
  avoid breakage on those boards, and avoid confusion, it's a reasonable
  idea to patch now instead of later.  There are no known users of the
  pre-release variant any more"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: porter: remove enable prop from HS-USB device node

8 years agoMerge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Linus Torvalds [Sun, 6 Mar 2016 21:51:27 +0000 (13:51 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "Just two ARM fixes this time: one to fix the hyp-stub for older ARM
  CPUs, and another to fix the set_memory_xx() permission functions to
  deal with zero sizes correctly"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8544/1: set_memory_xx fixes
  ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Sun, 6 Mar 2016 19:31:13 +0000 (11:31 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull ceph fix from Sage Weil:
 "This is a final commit we missed to align the protocol compatibility
  with the feature bits.

  It decodes a few extra fields in two different messages and reports
  EIO when they are used (not yet supported)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support

8 years agoMerge tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Sun, 6 Mar 2016 19:24:05 +0000 (11:24 -0800)]
Merge tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs

Pull UBI fix from Richard Weinberger:
 "This contains a single bug fix for UBI"

* tag 'upstream-4.5-rc7' of git://git.infradead.org/linux-ubifs:
  ubi: Fix out of bounds write in volume update code

8 years agoMerge branch 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 6 Mar 2016 19:19:28 +0000 (11:19 -0800)]
Merge branch 'for-linus-4.5-rc7' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
 "This contains three bug/build fixes"

* 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: use %lx format specifiers for unsigned longs
  um: Export pm_power_off
  Revert "um: Fix get_signal() usage"

8 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Sun, 6 Mar 2016 19:14:16 +0000 (11:14 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "Another round of fixes for 4.5:

   - Fix the use of an undocumented syntactial variant of the .type
     pseudo op which is not supported by the LLVM assembler.
   - Fix invalid initialization on S-cache-less systems.
   - Fix possible information leak from the kernel stack for SIGFPE.
   - Fix handling of copy_{from,to}_user() return value in KVM
   - Fix the last instance of irq_to_gpio() which now was causing build
     errors"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
  MIPS: kvm: Fix ioctl error handling.
  MIPS: scache: Fix scache init with invalid line size.
  MIPS: Avoid variant of .type unsupported by LLVM Assembler
  MIPS: jz4740: Fix surviving instance of irq_to_gpio()

8 years agoMerge tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 6 Mar 2016 19:08:06 +0000 (11:08 -0800)]
Merge tag 'powerpc-4.5-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 - cxl: Fix PSL timebase synchronization detection from Frederic Barrat
 - Fix oops when destroying hw_breakpoint event from Ravi Bangoria
 - Avoid lbarx on e5500 from Scott Wood

* tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/fsl-book3e: Avoid lbarx on e5500
  powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event
  cxl: Fix PSL timebase synchronization detection

8 years agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Sun, 6 Mar 2016 19:03:34 +0000 (11:03 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
 "One I2C bugfix ensuring correct memory allocation in a driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: brcmstb: allocate correct amount of memory for regmap

8 years agoMerge tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 6 Mar 2016 18:50:00 +0000 (10:50 -0800)]
Merge tag 'usb-4.5-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB driver ids for 4.5-rc7, and the removal of a driver
  we merged in 4.5-rc1 but it turns out it's not needed as the hardware
  is the same as a driver we already have in the tree.

  This was only figured out after doing a lot of cleanup on it, gotta
  love vendor-provided drivers...  The new device ids for the devices
  for this driver will be added later on when testing is completed, but
  for now, we will remove the driver to keep people from accidentally
  cleaning it up.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: qcserial: add Sierra Wireless EM74xx device ID
  Revert "USB: serial: add Moxa UPORT 11x0 driver"
  USB: serial: option: add support for Quectel UC20
  USB: serial: option: add support for Telit LE922 PID 0x1045
  USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
  USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
  usb: chipidea: otg: change workqueue ci_otg as freezable

8 years agoum: use %lx format specifiers for unsigned longs
Colin Ian King [Sat, 23 Jan 2016 19:17:59 +0000 (19:17 +0000)]
um: use %lx format specifiers for unsigned longs

static analysis from cppcheck detected %x being used for
unsigned longs:

[arch/x86/um/os-Linux/task_size.c:112]: (warning) %x in format
  string (no. 1) requires 'unsigned int' but the argument type
  is 'unsigned long'.

Use %lx instead of %x

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
8 years agoum: Export pm_power_off
Richard Weinberger [Mon, 25 Jan 2016 22:24:21 +0000 (23:24 +0100)]
um: Export pm_power_off

...modules are using this symbol.
Export it like all other archs to.

Signed-off-by: Richard Weinberger <richard@nod.at>
8 years agoRevert "um: Fix get_signal() usage"
Richard Weinberger [Mon, 25 Jan 2016 22:33:30 +0000 (23:33 +0100)]
Revert "um: Fix get_signal() usage"

Commit db2f24dc240856fb1d78005307f1523b7b3c121b
was plain wrong. I did not realize the we are
allowed to loop here.
In fact we have to loop and must not return to userspace
before all SIGSEGVs have been delivered.
Other archs do this directly in their entry code, UML
does it here.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
8 years agoubi: Fix out of bounds write in volume update code
Richard Weinberger [Sun, 21 Feb 2016 09:53:03 +0000 (10:53 +0100)]
ubi: Fix out of bounds write in volume update code

ubi_start_leb_change() allocates too few bytes.
ubi_more_leb_change_data() will write up to req->upd_bytes +
ubi->min_io_size bytes.

Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
8 years agoMerge tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Sat, 5 Mar 2016 20:35:48 +0000 (12:35 -0800)]
Merge tag 'sound-4.5-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "It's our tradition to get a high volume of fixes late at rc7: this
  time, X32 ABI breakage was found and this resulted in a high number
  LOCs.  The necessary changes to ALSA core codes were fairly
  straightforward, and more importantly, they are specific to X32, thus
  should be safe to apply.

  Other than that, rather a collection of small fixes:
   - Removal of the code that blocks too long at closing the OSS
     sequencer client (which was spotted by syzkaller, unsurprisingly)
   - Fixes races at HD-audio HDMI i915 audio binding
   - a few HDSP/HDPM zero-division fixes
   - Quirks for HD-audio and USB-audio as usual"

* tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - hdmi defer to register acomp eld notifier
  ALSA: hda - hdmi add wmb barrier for audio component
  ALSA: hda - Fix mic issues on Acer Aspire E1-472
  ALSA: seq: oss: Don't drain at closing a client
  ALSA: usb-audio: Add a quirk for Plantronics DA45
  ALSA: hdsp: Fix wrong boolean ctl value accesses
  ALSA: hdspm: Fix zero-division
  ALSA: hdspm: Fix wrong boolean ctl value accesses
  ALSA: timer: Fix ioctls for X32 ABI
  ALSA: timer: Fix broken compat timer user status ioctl
  ALSA: rawmidi: Fix ioctls X32 ABI
  ALSA: rawmidi: Use comapt_put_timespec()
  ALSA: pcm: Fix ioctls for X32 ABI
  ALSA: ctl: Fix ioctls for X32 ABI

8 years agoMerge tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sat, 5 Mar 2016 20:34:29 +0000 (12:34 -0800)]
Merge tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fix from Vinod Koul:
 "One minor fix on pxa driver to fix the cyclic dma tranfers"

* tag 'dmaengine-fix-4.5-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: pxa_dma: fix cyclic transfers

8 years agoMerge tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 5 Mar 2016 20:32:34 +0000 (12:32 -0800)]
Merge tag 'media/v4.5-4' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
  - some last time changes before we stablize the new entity function
    integer numbers at uAPI
  - probe: fix erroneous return value on i2c/adp1653 driver
  - fix tx 5v detect regression on adv7604 driver
  - fix missing unlock on error in vpfe_prepare_pipeline() on
    davinci_vpfe driver

* tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments
  [media] media.h: postpone connectors entities
  [media] media.h: use hex values for range offsets,  move connectors base up.
  [media] adv7604: fix tx 5v detect regression
  [media] media.h: get rid of MEDIA_ENT_F_CONN_TEST
  [media] [for,v4.5] media.h: increase the spacing between function ranges
  [media] media: i2c/adp1653: probe: fix erroneous return value
  [media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()

8 years agoMerge remote-tracking branches 'asoc/fix/wm8985', 'asoc/fix/wm8994', 'asoc/fix/wm8996...
Mark Brown [Sat, 5 Mar 2016 12:27:13 +0000 (21:27 +0900)]
Merge remote-tracking branches 'asoc/fix/wm8985', 'asoc/fix/wm8994', 'asoc/fix/wm8996', 'asoc/fix/wm9081' and 'asoc/fix/wm9713' into asoc-linus

8 years agoMerge remote-tracking branches 'asoc/fix/samsung', 'asoc/fix/tlv320dac33', 'asoc...
Mark Brown [Sat, 5 Mar 2016 12:26:58 +0000 (21:26 +0900)]
Merge remote-tracking branches 'asoc/fix/samsung', 'asoc/fix/tlv320dac33', 'asoc/fix/wl1273', 'asoc/fix/wm8753', 'asoc/fix/wm8904', 'asoc/fix/wm8958' and 'asoc/fix/wm8983' into asoc-linus

8 years agoMerge remote-tracking branches 'asoc/fix/jack', 'asoc/fix/max98088', 'asoc/fix/max980...
Mark Brown [Sat, 5 Mar 2016 12:26:45 +0000 (21:26 +0900)]
Merge remote-tracking branches 'asoc/fix/jack', 'asoc/fix/max98088', 'asoc/fix/max98095', 'asoc/fix/omap', 'asoc/fix/pxa' and 'asoc/fix/qcom-be' into asoc-linus