[ARM] 3977/1: AT91: remove loop waiting for reset

Removed the infinite loop in our arch_reset().

After calling arch_reset(), the kernel waits for 1 second before
printing a "reboot failed" message and then waits for ever itself.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3976/1: AT91: MAINTAINERS entry

Added MAINTAINERS entry for the Atmel AT91RM9200.
Accept (some) responsibility...

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3975/1: AT91: Comments in atmel_serial.h

Updated some of the comments in the atmel_serial.h header detailing
which bits are only available on the AT91RM9200 or the AT91SAM9xx
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3974/1: AT91: Remove USB Device header

The USB Device port registers are already defined in
drivers/usb/gadget/at91_udc.h.  This file can therefore just be removed.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3973/1: AT91: Serial driver compile fix

1. The CPU identification has moved from <system.h> to <cpu.h>.

2. AT91RM9200_BASE_US0 is only defined if we are compiling in support
for the AT91RM9200.  Therefore we need to replace the CONFIG_ARM ifdef
with CONFIG_ARCH_AT91RM9200

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3972/1: AT91: Update board.h

Replace the 'is_b' variable with 'slot_b' in at91_mmc_data.
Also add the new 'chipselect' variable for CF/PCMCIA and 'bus_width_16'
variable for NAND.

This (and previous patches) will unfortunately break the current MMC,
USB Gadget and PCMCIA drivers.  Updates and fixes for those drivers will
be submitted to the various subsystem maintainers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3966/1: AT91: RM9200 device data update

This patch contains various updates the at91rm9200_devices.c file:
      * Consistent naming of resources and platform_devices.
      * PCMCIA/Compact Flash: Configuration of the memory controller
        moved out of the driver and into this file.
      * MMC: Enable the VCC pin (if one is configured)
      * MMC: Enable the internal pullups on the I/O pins.
      * NAND: Configuration of the memory controller moved out of the
        driver and into this file.
      * Added TWI/I2C resources.
      * The names of some of the CONFIG_ variables were changed.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3961/2: AT91: Support for Atmel AT91SAM9261-EK board

This patch adds support for the Atmel AT91SAM9261-EK board.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3962/1: AT91: Support for Atmel AT91SAM9260-EK board

This patch adds support for the Atmel AT91SAM9260-EK board.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3960/1: AT91: Final SAM9 intergration patches.

This patch includes a number of small changes for integrating the
AT91SAM9261 and AT91SAM0260 support.

      * Can only select support for one AT91 processor at a time.
      * Remove most of the remaining static memory mapping for the
        AT91RM9200.
      * Reserve 1Mb of memory below the IO for mapping the internal SRAM
        and any custom board-specific devices (ie, FPGA).
      * The SAM9260 has more serial ports, so increase the maximum to 7.
      * Define the standard chipselect addresses, and define other
        addresses relative to those.
      * CLOCK_TICK_RATE is different on the SAM926x's.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3959/1: AT91: Support for SAM9 USB and HCK clocks

The bits used to select the USB clocks are different on the SAM9's.
Add support for the HCK clocks on the AT91SAM9261.

Patch from Patrice Vilchez & Nicolas Ferre

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3957/1: AT91: Physically mapped flash on DK and EK boards

This patch converts the old CONFIG_MTD_PHYSMAP_ options to the new
physmap API by creating a physmap platform device for the NOR flash
found on the Atmel AT91RM9200-DK and AT91RM9200-EK boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3956/1: AT91: Carmeva board update

This patch updates the Carmeva board support:
      * Specify the MMC Write-protect and Detection pins.
      * Add configuration of SPI devices.

Patch from Peer Georgi.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3955/1: AT91: Clear timer interrupt when resuming

Attached is a patch for at91rm9200_time.c which removes
the 'BUG: soft lockup detected on CPU#0!' message when
exiting suspended states.

Patch from Savin Zlobec

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3953/1: AT91: SAM9 platform devices

This patch includes the pin initialization, resource definition and
registration of the platform_devices for the SAM9260 and SAM9261
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3949/2: AT91: SAM9 timer driver

Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3952/1: AT91: Hardware headers for SAM9 perhipherals

This patch adds definitions for the new peripherals integrated in the
AT91SAM9260 and AT91SAM9261 processors:  ECC, LCD, RSTC, RTT, SHDWC,
WDT, MATRIX, SDRAMC, SMC.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3954/1: AT91: Update drivers for new headers

This patch updates the drivers (and other files) which include the
hardware headers.  This fixes the breakage introduced in patches 3950/1
and 3951/1 (those patches were getting big).

The AVR32 architecture uses the same serial driver and had its own copy
of at91rm9200_pdc.h.  Renamed it to at91_pdc.h

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3951/1: AT91: Rename user peripheral header files

Most of the AT91RM9200 user peripherals are also integrated into the
Atmel SAM9 range of processors.  This patch renames the headers from
at91rm9200_xx.h to at91_xx.h to indicate they're not
at91rm9200-specific.

The new SAM9-specific registers and register bits have also been
defined.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3950/1: AT91: Split up system header file

The AT91RM9200 system header file (at91rm9200_sys.h) has been split into
separate header files for each peripheral.  This was necessary since
some of the system peripherals are also used on AT91SAM9260 and
AT91SAM9261.

The new SAM9-specific register bits have also been defined.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260

This patch adds the initial support for the newer Atmel AT91SAM9261 and
AT91SAM9260 processors.  The code is based on, and makes use of, the
existing AT91RM9200 support.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3947/1: AT91: cpu_is_XXX macro's

This patch replaces the arch_identify() in system.h with a set of
cpu_is_XXX() macro's.  This allows for compile-time checking of the
target AT91 processor.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3946/1: AT91: at91_arch_reset and at91_extern_irq

The external interrupt sources are different on the various AT91
processors.  This patch introduces the global 'at91_extern_irq' variable
that contains a bitset of the available external interrupt sources.

The processor reset mechanism also differs on the various AT91
processors.  This patch also adds a global 'at91_arch_reset' callback
(from system.h) into the processor-specific code to perform the reset.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3945/1: AT91: Rename devices.c

This patch renames the arch/arm/mach-at91rm9200/devices.c file to
at91rm9200_devices.c.  The file contains AT91RM9200-specific code, so we
will need separate files for the SAM9 processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Linux 2.6.19

It's all good.

[PATCH] r8169: Fix iteration variable sign

This changes the type of variable "i" in rtl8169_init_one()
from "unsigned int" to "int". "i" is checked for < 0 later,
which can never happen for "unsigned". This results in broken
error handling.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms
  [ARM] Export smp_call_function()
  [ARM] Add PM_LEGACY defaults

[ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms

Move declaration of struct pxa2xx_udc_mach_info from
include/asm-arm/arch-pxa/udc.h to new file
include/asm-arm/mach/udc_pxa2xx.h.

This allow us to use this structure with
multiple platforms - pxa and ixp4xx. USB
device controller used in pxa25x is the same
as controller used in ixp4xx.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[MIPS] Do topology_init even on uniprocessor kernels.

Otherwise CPU 0 doesn't show up in sysfs which breaks some software.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Fix MAX_HEADER setting.
  [NETFILTER]: ipt_REJECT: fix memory corruption
  [NETFILTER]: conntrack: fix refcount leak when finding expectation
  [NETFILTER]: ctnetlink: fix reference count leak
  [NETFILTER]: nf_conntrack: fix the race on assign helper to new conntrack
  [NETFILTER]: nfctnetlink: assign helper to newly created conntrack

[NET]: Fix MAX_HEADER setting.

MAX_HEADER is either set to LL_MAX_HEADER or LL_MAX_HEADER + 48, and
this is controlled by a set of CONFIG_* ifdef tests.

It is trying to use LL_MAX_HEADER + 48 when any of the tunnels are
enabled which set hard_header_len like this:

dev->hard_header_len = LL_MAX_HEADER + sizeof(struct xxx);

The correct set of tunnel drivers which do this are:

ipip
ip_gre
ip6_tunnel
sit

so make the ifdef test match.

Noticed by Patrick McHardy and with help from Herbert Xu.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ipt_REJECT: fix memory corruption

On devices with hard_header_len > LL_MAX_HEADER ip_route_me_harder()
reallocates the skb, leading to memory corruption when using the stale
tcph pointer to update the checksum.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: conntrack: fix refcount leak when finding expectation

All users of __{ip,nf}_conntrack_expect_find() don't expect that
it increments the reference count of expectation.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: ctnetlink: fix reference count leak

When NFA_NEST exceeds the skb size the protocol reference is leaked.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack: fix the race on assign helper to new conntrack

The found helper cannot be assigned to conntrack after unlocking
nf_conntrack_lock. This tries to find helper to assign again.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfctnetlink: assign helper to newly created conntrack

This fixes the bug which doesn't assign helper to newly created
conntrack via nf_conntrack_netlink.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: Fixup ata_sas_queuecmd to handle __ata_scsi_queuecmd failure
  [PATCH] ahci: AHCI mode SATA patch for Intel ICH9
  [PATCH] libata: don't schedule EH on wcache on/off if old EH

Merge branch 'fixes' of git://git./linux/kernel/git/jmorris/selinux-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: fix dentry_open() error check

Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: Use stricter in process stack check for unwinder
  [PATCH] i386: Fix compilation with UP genericarch
  [PATCH] x86-64: Fix warning in io_apic.c
  [PATCH] x86-64: work around gcc4 issue with -Os in Dwarf2 stack unwind
  [PATCH] x86_64: Align data segment to PAGE_SIZE boundary

Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.13
  [ALSA] snd-emu10k1: Fix capture for one variant.
  [ALSA] Fix hang-up at disconnection of usb-audio
  [ALSA] hda: fix typo for xw4400 PCI sub-ID
  [ALSA] hda: fix sigmatel dell system detection
  [ALSA] Enable stereo line input for TAS codec
  [ALSA] rtctimer: handle RTC interrupts with a tasklet

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix Bonito bootup message.

[PATCH] add missing libsas include to fix s390 compilation.

include/scsi/libsas.h:479: error: field 'smp_req' has incomplete type
include/scsi/libsas.h:480: error: field 'smp_resp' has incomplete type

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ecryptfs: fix crypto_alloc_blkcipher() error check

The return value of crypto_alloc_blkcipher() should be checked by IS_ERR().

Cc: Mike Halcrow <mhalcrow@us.ibm.com>
Cc: Phillip Hellewell <phillip@hellewell.homeip.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix create_write_pipe() error check

The return value of create_write_pipe()/create_read_pipe() should be
checked by IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix Intel/Sharp command set erase suspend bug

When we sleep and wait for a suspended operation to be resumed, go
back and check until it's ready -- don't just continue after the first
time we're woken. This can cause file system corruption.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] bridge: fix possible overflow in get_fdb_entries

Make sure to properly clamp maxnum to avoid overflow

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Eugene Teo <eteo@redhat.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[MIPS] Fix Bonito bootup message.

Even when enabling Bonito IOBC coherence the kernel would actually claim
it was disabling it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[PATCH] x86-64: Use stricter in process stack check for unwinder

Previously it would check for alignment only, which could break
if the stack pointer was unaligned. Now explicitely check if the
stack pointer is in the stack page of the current process.

Ported from i386.

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] i386: Fix compilation with UP genericarch

Fix

arch/i386/mach-generic/built-in.o: In function `apicid_to_node':
summit.c:(.text+0x2f): undefined reference to `apicid_2_node'

with CONFIG_GENERICH_ARCH and !CONFIG_SMP
Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86-64: Fix warning in io_apic.c

[PATCH] x86-64: work around gcc4 issue with -Os in Dwarf2 stack unwind

This fixes a problem with gcc4 mis-compiling the stack unwind code under
-Os, which resulted in 'stuck' messages whenever an assembly routine was
encountered.

(The second hunk is trivial cleanup.)

Signed-off-by: Jan Beulich <jbeulich@novell.com>

Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

[PATCH] x86_64: fix 'earlyprintk=...,keep' regression

Commit 2c8c0e6b8d7700a990da8d24eff767f9ca223b96 ("[PATCH] Convert x86-64
to early param") broke the earlyprintk=...,keep feature.

This restores that functionality.  Tested on x86_64.  Must-have for
v2.6.19, no risk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[ALSA] version 1.0.13

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-emu10k1: Fix capture for one variant.

Fixes ALSA bug#324

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix hang-up at disconnection of usb-audio

Fix hang-up at disconnection of usb-audio devices while accessing PCM.
Don't handle PCM operations any more after shutdown flag is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda: fix typo for xw4400 PCI sub-ID

The PCI sub-device ID for the HP xw4400 is actually 0x280c.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda: fix sigmatel dell system detection

Fixes Dell system detection on 9200 codecs. The support
to detect certain Dell machines was merged in the
9205 table where it will be unused on the various Dell
9200-based codec systems. This moves the subsystem IDs
to the correct 9200 table.

Signed-off-by: Matt Porter <mporter@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Enable stereo line input for TAS codec

Despite what the data sheet says in one place, to get stereo input
from input A (line in), we have to clear the 'input B monaural' bit in
the ACR.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] rtctimer: handle RTC interrupts with a tasklet

The calls to rtc_control() from inside the interrupt handler can upset
the RTC code, so move our interrupt handling code to a tasklet.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[PATCH] libata: Fixup ata_sas_queuecmd to handle __ata_scsi_queuecmd failure

Fixes ata_sas_queuecmd to properly handle a failure from
__ata_scsi_queuecmd.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[PATCH] ahci: AHCI mode SATA patch for Intel ICH9

This patch adds the Intel ICH9 AHCI controller DID's for SATA support.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[PATCH] libata: don't schedule EH on wcache on/off if old EH

Do not schedule EH for revalidation on wcache on/off if old EH.  Old
EH cannot handle it and will result in WARN_ON()'s and oops.

This closes bug #7412.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

selinux: fix dentry_open() error check

The return value of dentry_open() shoud be checked by IS_ERR().

Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>

Fix 'ALIGN()' macro, take 2

You wouldn't think that doing an ALIGN() macro that aligns something up
to a power-of-two boundary would be likely to have bugs, would you?

But hey, in the wonderful world of mixing integer types, you have to be
careful.  This just makes sure that the alignment is interpreted in the
same type as the thing to be aligned.

Thanks to Roland Dreier, who noticed that the amso1100 driver got broken
by the previous fix (that just extended the mask to "unsigned long", but
was still broken in "unsigned long long" - it just happened to be the
same on 64-bit architectures).

See commit 4c8bd7eeee4c8f157fb61fb64b57500990b42e0e for the history of
bugs here...

Acked-by: Roland Dreier <rdreier@cisco.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: David Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix incorrent type of flags in <asm/semaphore.h>

I still think using BUILD_BUG_ON() is unacceptable, especially given how
vague the error message was.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
[ And I already removed gthe BUILD_BUG_ON() in the previous commit ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "[PATCH] Enforce "unsigned long flags;" when spinlocking"

This reverts commit ee3ce191e8eaa4cc15c51a28b34143b36404c4f5, since it
broke on at least ARM, MIPS and PA-RISC due to complicated header file
dependencies.

Conflicts in include/linux/spinlock.h (due to the "nested" variety
fixes) fixed up by hand.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [XFRM] STATE: Fix to respond error to get operation if no matching entry exists.
  [NET]: Re-fix of doc-comment in sock.h
  [6PACK]: Masking bug in 6pack driver.
  [NET]: Fix kfifo_alloc() error check.
  [UDP]: Make udp_encap_rcv use pskb_may_pull
  [NETFILTER]: H.323 conntrack: fix crash with CONFIG_IP_NF_CT_ACCT

[ARM] Export smp_call_function()

smp_call_function() will be used with the MP/core oprofile support
patch.  Export it as _GPL.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Add PM_LEGACY defaults

Eliminate two warnings:

kernel/power/pm.c:205: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:64)
kernel/power/pm.c:206: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:180)

by updating defconfig files to contain a sensible PM_LEGACY default.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

V4L/DVB (4874): Fix oops on symbol rate==0

The tda10086 causes an oops (divide by zero) if a zero symbol rate is used;
this prevents this.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4885): Improve saa711x check

The old code would accept any device on the same i2c address as the
saa711x chips as an saa711x. However, this fails with saa717x chips,
which use that same address and so are misdetected as a saa7111. Now
check whether the chip is really a saa711x model.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4865): Fix: Slot 0 not NULL on disconnecting SN9C10x PC Camera

The patch fix bug 5748.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4849): Add missing spin_unlock to saa6588 decoder driver

Sparse noticed a lock imbalance in read_from_buf(). Further inspection shows
that the lock should not be held when the function exits.
This adds a spin_unlock_irqrestore(), so that every exit path of the
read_from_buf() function is consistent. The unlock was missing on an error
path.

Signed-off-by: Ira W. Snyder <devel@irasnyder.com>
Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4832): Fix uninitialised variable in dvb_frontend_swzigzag

Spotted by coverity/Adrian Bunk.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4840): Budget: diseqc_method module parameter for cards with subsystem-id 13c2:1003

New module parameter diseqc_method for cards with subsystem-id 13c2:1003.
- 0: unreliable method, can be used by all board revisions (default)
- 1: reliable method, works for newer board layouts only
The parameter has no effect for cards with other subsystem-ids.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (4831): Fix tuning on older budget DVBS cards.

Fixes to DISEQC on these cards inadvertently broke normal tone/voltage
signalling. This restores the necessary function.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

[XFRM] STATE: Fix to respond error to get operation if no matching entry exists.

When application uses XFRM_MSG_GETSA to get state entry through
netlink socket and kernel has no matching one, the application expects
reply message with error status by kernel.

Kernel doesn't send the message back in the case of Mobile IPv6 route
optimization protocols (i.e. routing header or destination options
header). This is caused by incorrect return code "0" from
net/xfrm/xfrm_user.c(xfrm_user_state_lookup) and it makes kernel skip
to acknowledge at net/netlink/af_netlink.c(netlink_rcv_skb).

This patch fix to reply ESRCH to application.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: TAKAMIYA Noriaki <takamiya@po.ntts.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Re-fix of doc-comment in sock.h

Restoring old, correct comment for sk_filter_release, moving it to
where it should actually be, and changing new comment into proper
comment for sk_filter_rcu_free, where it actually makes sense.

The original fix submitted for this on Oct 23 mistakenly documented
the wrong function.

Signed-off-by: Paul Bonser <misterpib@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[6PACK]: Masking bug in 6pack driver.

Looks like a broken masking to me, binary not is used where bitwise
not was intended.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix kfifo_alloc() error check.

The return value of kfifo_alloc() should be checked by IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP]: Make udp_encap_rcv use pskb_may_pull

Make udp_encap_rcv use pskb_may_pull

IPsec with NAT-T breaks on some notebooks using the latest e1000 chipset,
when header split is enabled. When receiving sufficiently large packets, the
driver puts everything up to and including the UDP header into the header
portion of the skb, and the rest goes into the paged part. udp_encap_rcv
forgets to use pskb_may_pull, and fails to decapsulate it. Instead, it
passes it up it to the IKE daemon.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: H.323 conntrack: fix crash with CONFIG_IP_NF_CT_ACCT

H.323 connection tracking code calls ip_ct_refresh_acct() when
processing RCFs and URQs but passes NULL as the skb.
When CONFIG_IP_NF_CT_ACCT is enabled, the connection tracking core tries
to derefence the skb, which results in an obvious panic.
A similar fix was applied on the SIP connection tracking code some time
ago.

Signed-off-by: Faidon Liambotis <paravoid@debian.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] uml: make execvp safe for our usage

Reimplement execvp for our purposes - after we call fork() it is fundamentally
unsafe to use the kernel allocator - current is not valid there.  So we simply
pass to our modified execvp() a preallocated buffer.  This fixes a real bug
and works very well in testing (I've seen indirectly warning messages from the
forked thread - they went on the pipe connected to its stdout and where read
as a number by UML, when calling read_output().  I verified the obtained
number corresponded to "BUG:").

The added use of __cant_sleep() is not a new bug since __cant_sleep() is
already used in the same function - passing an atomicity parameter would be
better but it would require huge change, stating that this function must not
be called in atomic context and can sleep is a better idea (will make sure of
this gradually).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] usb: ati remote memleak fix

This is a bug.  When checking for ati_remote->outbuf we free freeing
ati_remote->inbuf so we end up freeing ati_remote->inbuf twice.

Also the checks for 'ati_remote->inbuf != NULL' and 'ati_remote->outbuf !=
NULL' are redundant as usb_buffer_free() does this.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lockdep: spin_lock_irqsave_nested()

Introduce spin_lock_irqsave_nested(); implementation from:
 http://lkml.org/lkml/2006/6/1/122
Patch from:
 http://lkml.org/lkml/2006/9/13/258

[akpm@osdl.org: two compile fixes]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jiri Kosina <jikos@jikos.cz>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Enforce "unsigned long flags;" when spinlocking

Make it break or warn if you pass to spin_lock_irqsave() and friends
something different from "unsigned long flags;".  Suprisingly large amount
of these was caught by recent commit
c53421b18f205c5f97c604ae55c6a921f034b0f6 and others.

Idea is largely from FRV typechecking. Suggestions from Andrew Morton.
All stupid typos in first version fixed.

Passes allmodconfig on i386, x86_64, alpha, arm as well as my usual config.

Note #1: checking with sparse is still needed, because a driver can save
 and pass around flags or something. So far patch is very intrusive.
Note #2: techically, we should break only if
sizeof(flags) < sizeof(unsigned long),
 however, the more pain for getting suspicious code into kernel,
 the better.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tlclk: fix platform_device_register_simple() error check

The return value of platform_device_register_simple() should be checked by
IS_ERR().

This patch also fix misc_register() error case.  Because misc_register()
returns error code.

Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix copy_process() error check

The return value of copy_process() should be checked by IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sgiioc4: Disable module unload

This patch removes a module_exit function that sgiioc4 should not have had.

It seems that the IDE layer doesn't support submodule unloading.  sgiioc4 was
the only driver in drivers/ide/pci that had an exit function.  After an
unload, the devices would stay around and the next attempt to reference would
crash...

Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Acked-by: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix menuconfig colours with TERM=vt100

On Mon, 13 Nov 2006, Phil Oester wrote:
> In commit 350b5b76384e77bcc58217f00455fdbec5cac594, the default menuconfig
> color scheme was changed to bluetitle.  This breaks the highlighting
> of the selected item for me with TERM=vt100.  The only way I can see
> which item is selected is via:
>
>     make MENUCONFIG_COLOR=mono menuconfig
>
> Which restores the pre-2.6.19 white on black highlighting.

Fix.

Cc: Phil Oester <kernel@linuxace.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] qconf: fix uninitialsied member

Fixes a segfault reported by Randy.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix device_attribute memory leak in device_del

dev->devt_attr is allocated in device_add() but it is never freed in
device_del() in the drivers/base/core.c file (reported by kmemleak).

Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] reiserfs: fmt bugfix

One reiserfs_warning() call uses %lu, but doesn't supply what to print.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/rtc/rtc-rs5c372.c: fix a NULL dereference

The correct order is: NULL check before dereference

This was a guaranteed NULL dereference with debugging enabled since
rs5c372_sysfs_show_osc() does actually pass NULL...

Spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rtc class locking bugfixes

I got a lockdep warning when running "rtctest" so I though it'd be good
to see what was up.

 - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq()
   by irq handlerss ... but in a handful of other cases, grabbed without
   blocking IRQs.

 - Some callers to rtc_update_irq() were not ensuring IRQs were blocked,
   yet the routine expects that; make sure all callers block IRQs.

It would appear that RTC API tests haven't been part of anyone's kernel
regression test suite recently, at least not with lockdep running.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rtc framework handles periodic irqs

The RTC framework has an irq_set_freq() method that should be used to manage
the periodic IRQ frequency, but the current ioctl logic doesn't know how to do
that.  This patch teaches it how.

This means that drivers implementing irq_set_freq() will automatically support
RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the
driver.

[akpm@osdl.org: export rtc_irq_set_freq]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Documentation/rtc.txt updates (for rtc class)

This updates the RTC documentation to summarize the two APIs now available:
the old PC/AT one, and the new RTC class drivers.  It also updates the
included "rtctest.c" file to better meet Linux style guidelines, and to work
with the new RTC drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] debugfs: add header file

debugfs needs include/linux/kobject.h for <kernel_subsys>.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>